aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorDan Williams <dcbw@redhat.com>2006-03-31 15:08:46 -0500
committerJohn W. Linville <linville@tuxdriver.com>2006-04-19 17:25:37 -0400
commit6fcdf565ffb8c661749372115d28efdbe525aeba (patch)
tree2fa6f7e10717dd4dd3b4a65e08599455bf9857dc /drivers
parent[PATCH] softmac uses Wiress Ext. (diff)
downloadlinux-dev-6fcdf565ffb8c661749372115d28efdbe525aeba.tar.xz
linux-dev-6fcdf565ffb8c661749372115d28efdbe525aeba.zip
[PATCH] wireless/airo: clean up WEXT association and scan events
Airo firmware versions >= 5.30.17 send re-association events to the driver that are currently unrecognized, causing spurious disassociation events to be sent to user space. Loss of sync due to scan requests also results in disassociation events sent to user space. This patch traps those two events; suppressing sync-loss on scan, and sending the correct association event on re-association notifications. Signed-off-by: Dan Williams <dcbw@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
Diffstat (limited to 'drivers')
-rw-r--r--drivers/net/wireless/airo.c46
1 files changed, 17 insertions, 29 deletions
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index 108d9fed8f07..00764ddd74d8 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -3139,6 +3139,7 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
}
if ( status & EV_LINK ) {
union iwreq_data wrqu;
+ int scan_forceloss = 0;
/* The link status has changed, if you want to put a
monitor hook in, do it here. (Remember that
interrupts are still disabled!)
@@ -3157,7 +3158,8 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
code) */
#define AUTHFAIL 0x0300 /* Authentication failure (low byte is reason
code) */
-#define ASSOCIATED 0x0400 /* Assocatied */
+#define ASSOCIATED 0x0400 /* Associated */
+#define REASSOCIATED 0x0600 /* Reassociated? Only on firmware >= 5.30.17 */
#define RC_RESERVED 0 /* Reserved return code */
#define RC_NOREASON 1 /* Unspecified reason */
#define RC_AUTHINV 2 /* Previous authentication invalid */
@@ -3174,44 +3176,30 @@ static irqreturn_t airo_interrupt ( int irq, void* dev_id, struct pt_regs *regs)
leaving BSS */
#define RC_NOAUTH 9 /* Station requesting (Re)Association is not
Authenticated with the responding station */
- if (newStatus != ASSOCIATED) {
- if (auto_wep && !apriv->expires) {
- apriv->expires = RUN_AT(3*HZ);
- wake_up_interruptible(&apriv->thr_wait);
- }
- } else {
- struct task_struct *task = apriv->task;
+ if (newStatus == FORCELOSS && apriv->scan_timeout > 0)
+ scan_forceloss = 1;
+ if(newStatus == ASSOCIATED || newStatus == REASSOCIATED) {
if (auto_wep)
apriv->expires = 0;
- if (task)
- wake_up_process (task);
+ if (apriv->task)
+ wake_up_process (apriv->task);
set_bit(FLAG_UPDATE_UNI, &apriv->flags);
set_bit(FLAG_UPDATE_MULTI, &apriv->flags);
- }
- /* Question : is ASSOCIATED the only status
- * that is valid ? We want to catch handover
- * and reassociations as valid status
- * Jean II */
- if(newStatus == ASSOCIATED) {
-#if 0
- /* FIXME: Grabbing scan results here
- * seems to be too early??? Just wait for
- * timeout instead. */
- if (apriv->scan_timeout > 0) {
- set_bit(JOB_SCAN_RESULTS, &apriv->flags);
- wake_up_interruptible(&apriv->thr_wait);
- }
-#endif
+
if (down_trylock(&apriv->sem) != 0) {
set_bit(JOB_EVENT, &apriv->flags);
wake_up_interruptible(&apriv->thr_wait);
} else
airo_send_event(dev);
- } else {
- memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
- wrqu.ap_addr.sa_family = ARPHRD_ETHER;
+ } else if (!scan_forceloss) {
+ if (auto_wep && !apriv->expires) {
+ apriv->expires = RUN_AT(3*HZ);
+ wake_up_interruptible(&apriv->thr_wait);
+ }
/* Send event to user space */
+ memset(wrqu.ap_addr.sa_data, '\0', ETH_ALEN);
+ wrqu.ap_addr.sa_family = ARPHRD_ETHER;
wireless_send_event(dev, SIOCGIWAP, &wrqu,NULL);
}
}
@@ -7136,10 +7124,10 @@ static int airo_set_scan(struct net_device *dev,
goto out;
/* Initiate a scan command */
+ ai->scan_timeout = RUN_AT(3*HZ);
memset(&cmd, 0, sizeof(cmd));
cmd.cmd=CMD_LISTBSS;
issuecommand(ai, &cmd, &rsp);
- ai->scan_timeout = RUN_AT(3*HZ);
wake = 1;
out: