Merge tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 6.0:

- Remove superfluous interrupt-names from imx8mq-tqma8mq RTC device to
  silence dtbs_check warning.
- A few Verdin board fixes on CAN clock frequency, mcp251xfd interrupt,
  atmel_mxt_ts reset polarity and USB PHY.
- Remove duplicated node and fix spi-flash compatible for
  imx6qdl-kontron-samx6i.
- A couple of i.MX8M Plus DHCOM fixes from Marek Vasut on ECSPI1 pinmux
  and I2C5 GPIO assignment.
- A couple of Venice fixes on SAI2 pin settings and phy-mode.
- Drop in-band autoneg for 2500base-x phy-mode on ls1028a-qds-65bb
  board.
- Revert the power device name setting change from imx8m-blk-ctrl
  driver, as it causes issue for sysfs cleanup path.
- Fix gpcv2 driver to assert reset before ungating clock.

* tag 'imx-fixes-6.0' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  arm64: dts: freescale: verdin-imx8mp: fix atmel_mxt_ts reset polarity
  arm64: dts: freescale: verdin-imx8mm: fix atmel_mxt_ts reset polarity
  arm64: dts: imx8mp: Fix I2C5 GPIO assignment on i.MX8M Plus DHCOM
  arm64: dts: imx8mm-venice-gw7901: fix port/phy validation
  arm64: dts: verdin-imx8mm: add otg2 pd to usbphy
  soc: imx: gpcv2: Assert reset before ungating clock
  arm64: dts: ls1028a-qds-65bb: don't use in-band autoneg for 2500base-x
  ARM: dts: imx6qdl-kontron-samx6i: fix spi-flash compatible
  ARM: dts: imx6qdl-kontron-samx6i: remove duplicated node
  ARM: dts: imx6qdl-vicut1.dtsi: Fix node name backlight_led
  arm64: dts: imx8mq-tqma8mq: Remove superfluous interrupt-names
  arm64: dts: imx8mp: Adjust ECSPI1 pinmux on i.MX8M Plus DHCOM
  arm64: dts: imx8mp-venice-gw74xx: fix sai2 pin settings
  arm64: dts: imx8mm-verdin: use level interrupt for mcp251xfd
  arm64: dts: imx8mm-verdin: update CAN clock to 40MHz
  Revert "soc: imx: imx8m-blk-ctrl: set power device name"

Link: https://lore.kernel.org/r/20220823092631.GV149610@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

2 files changed, 4 insertions, 2 deletions

diff --git a/drivers/soc/imx/gpcv2.c b/drivers/soc/imx/gpcv2.c
index 6383a4edc360..88aee59730e3 100644
--- a/drivers/soc/imx/gpcv2.c
+++ b/drivers/soc/imx/gpcv2.c
@@ -335,6 +335,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		}
 	}
 
+	reset_control_assert(domain->reset);
+
 	/* Enable reset clocks for all devices in the domain */
 	ret = clk_bulk_prepare_enable(domain->num_clks, domain->clks);
 	if (ret) {
@@ -342,7 +344,8 @@ static int imx_pgc_power_up(struct generic_pm_domain *genpd)
 		goto out_regulator_disable;
 	}
 
-	reset_control_assert(domain->reset);
+	/* delays for reset to propagate */
+	udelay(5);
 
 	if (domain->bits.pxx) {
 		/* request the domain to power up */
diff --git a/drivers/soc/imx/imx8m-blk-ctrl.c b/drivers/soc/imx/imx8m-blk-ctrl.c
index dff7529268e4..972f289d300a 100644
--- a/drivers/soc/imx/imx8m-blk-ctrl.c
+++ b/drivers/soc/imx/imx8m-blk-ctrl.c
@@ -243,7 +243,6 @@ static int imx8m_blk_ctrl_probe(struct platform_device *pdev)
 			ret = PTR_ERR(domain->power_dev);
 			goto cleanup_pds;
 		}
-		dev_set_name(domain->power_dev, "%s", data->name);
 
 		domain->genpd.name = data->name;
 		domain->genpd.power_on = imx8m_blk_ctrl_power_on;