aboutsummaryrefslogtreecommitdiffstats
path: root/drivers
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2015-03-10 17:44:34 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2015-03-10 17:44:34 -0700
commitcca28a5fda5d8fa69982bdb54341eeeb3eab215a (patch)
treeac563c15a31ea1dcdd4a67f01df3b85b58149913 /drivers
parentMerge tag 'iommu-fixes-v4.0-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu (diff)
parentmtd: nand: MTD_NAND_HISI504 should depend on HAS_DMA (diff)
downloadlinux-dev-cca28a5fda5d8fa69982bdb54341eeeb3eab215a.tar.xz
linux-dev-cca28a5fda5d8fa69982bdb54341eeeb3eab215a.zip
Merge tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd
Pull MTD fixes from Brian Norris: * pxa3xx_nand - fix timeout issues when draining the FIFO (BCH only) - don't crash when no chip-selects are used * hisi504_nand - depend on HAS_DMA, to fix compile errors * tag 'for-linus-20150310' of git://git.infradead.org/linux-mtd: mtd: nand: MTD_NAND_HISI504 should depend on HAS_DMA mtd: pxa3xx_nand: fix driver when num_cs is 0 mtd: nand: pxa3xx: Fix PIO FIFO draining
Diffstat (limited to 'drivers')
-rw-r--r--drivers/mtd/nand/Kconfig1
-rw-r--r--drivers/mtd/nand/pxa3xx_nand.c50
2 files changed, 45 insertions, 6 deletions
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 5b76a173cd95..5897d8d8fa5a 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -526,6 +526,7 @@ config MTD_NAND_SUNXI
config MTD_NAND_HISI504
tristate "Support for NAND controller on Hisilicon SoC Hip04"
+ depends on HAS_DMA
help
Enables support for NAND controller on Hisilicon SoC Hip04.
diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c
index 96b0b1d27df1..10b1f7a4fe50 100644
--- a/drivers/mtd/nand/pxa3xx_nand.c
+++ b/drivers/mtd/nand/pxa3xx_nand.c
@@ -480,6 +480,42 @@ static void disable_int(struct pxa3xx_nand_info *info, uint32_t int_mask)
nand_writel(info, NDCR, ndcr | int_mask);
}
+static void drain_fifo(struct pxa3xx_nand_info *info, void *data, int len)
+{
+ if (info->ecc_bch) {
+ int timeout;
+
+ /*
+ * According to the datasheet, when reading from NDDB
+ * with BCH enabled, after each 32 bytes reads, we
+ * have to make sure that the NDSR.RDDREQ bit is set.
+ *
+ * Drain the FIFO 8 32 bits reads at a time, and skip
+ * the polling on the last read.
+ */
+ while (len > 8) {
+ __raw_readsl(info->mmio_base + NDDB, data, 8);
+
+ for (timeout = 0;
+ !(nand_readl(info, NDSR) & NDSR_RDDREQ);
+ timeout++) {
+ if (timeout >= 5) {
+ dev_err(&info->pdev->dev,
+ "Timeout on RDDREQ while draining the FIFO\n");
+ return;
+ }
+
+ mdelay(1);
+ }
+
+ data += 32;
+ len -= 8;
+ }
+ }
+
+ __raw_readsl(info->mmio_base + NDDB, data, len);
+}
+
static void handle_data_pio(struct pxa3xx_nand_info *info)
{
unsigned int do_bytes = min(info->data_size, info->chunk_size);
@@ -496,14 +532,14 @@ static void handle_data_pio(struct pxa3xx_nand_info *info)
DIV_ROUND_UP(info->oob_size, 4));
break;
case STATE_PIO_READING:
- __raw_readsl(info->mmio_base + NDDB,
- info->data_buff + info->data_buff_pos,
- DIV_ROUND_UP(do_bytes, 4));
+ drain_fifo(info,
+ info->data_buff + info->data_buff_pos,
+ DIV_ROUND_UP(do_bytes, 4));
if (info->oob_size > 0)
- __raw_readsl(info->mmio_base + NDDB,
- info->oob_buff + info->oob_buff_pos,
- DIV_ROUND_UP(info->oob_size, 4));
+ drain_fifo(info,
+ info->oob_buff + info->oob_buff_pos,
+ DIV_ROUND_UP(info->oob_size, 4));
break;
default:
dev_err(&info->pdev->dev, "%s: invalid state %d\n", __func__,
@@ -1572,6 +1608,8 @@ static int alloc_nand_resource(struct platform_device *pdev)
int ret, irq, cs;
pdata = dev_get_platdata(&pdev->dev);
+ if (pdata->num_cs <= 0)
+ return -ENODEV;
info = devm_kzalloc(&pdev->dev, sizeof(*info) + (sizeof(*mtd) +
sizeof(*host)) * pdata->num_cs, GFP_KERNEL);
if (!info)