diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-27 16:19:22 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2010-02-27 16:19:22 -0800 |
| commit | f1dd6ad599732fc89f36fdd65a2c2cf3c63a8711 (patch) | |
| tree | 5092207128e47cba99dc0fe373fff6a36f4cb4b8 /drivers | |
| parent | Merge git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 (diff) | |
| parent | MIPS: Alchemy: defconfig updates (diff) | |
| download | linux-dev-f1dd6ad599732fc89f36fdd65a2c2cf3c63a8711.tar.xz linux-dev-f1dd6ad599732fc89f36fdd65a2c2cf3c63a8711.zip | |
Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (141 commits)
MIPS: Alchemy: defconfig updates
MIPS: Alchemy: Fix Au1100 ethernet build failure
MIPS: Alchemy: Repair db1500/bosporus builds
MIPS: ARC: Cleanup unused definitions from sgialib.h
MIPS: Cobalt: convert legacy port addresses to GT-64111 bus addresses
MIPS: Alchemy: use 36bit addresses for PCMCIA resources.
MIPS: Cobalt: Fix theoretical port aliasing issue
MIPS: Use ALIGN(x, bytes) instead of __ALIGN_MASK(x, bytes - 1)
MIPS: Crazy spinlock speed test.
MIPS: Optimize spinlocks.
MIPS: Alchemy: devboard PM needs to save CPLD registers.
MIPS: PowerTV: Eliminate duplicate opcode definition macros
MIPS: Lemote 2F: Move printks out of port_access_lock.
MIPS: PNX833x: Convert IRQ controller locks to raw spinlocks.
MIPS: Octeon: Replace spinlock with raw_spinlocks in dma-octeon.c.
MIPS: Octeon: Replace rwlocks in irq_chip handlers with raw_spinlocks.
MIPS: Octeon: Convert octeon_irq_msi_lock to raw spinlock.
MIPS: Loongson: Remove pointless sample_lock from oprofile code.
MIPS: SNI: Convert sni_rm200_i8259A_lock to raw spinlock.
MIPS: i8259: Convert IRQ controller lock to raw spinlock.
...
Diffstat (limited to 'drivers')
47 files changed, 2682 insertions, 1959 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index 5f318ce29770..737f05200b1d 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -564,6 +564,16 @@ config I2C_VERSATILE This driver can also be built as a module. If so, the module will be called i2c-versatile. +config I2C_OCTEON + tristate "Cavium OCTEON I2C bus support" + depends on CPU_CAVIUM_OCTEON + help + Say yes if you want to support the I2C serial bus on Cavium + OCTEON SOC. + + This driver can also be built as a module. If so, the module + will be called i2c-octeon. + comment "External I2C/SMBus adapter drivers" config I2C_PARPORT diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile index 302c551977bb..c2c4ea1908d8 100644 --- a/drivers/i2c/busses/Makefile +++ b/drivers/i2c/busses/Makefile @@ -54,6 +54,7 @@ obj-$(CONFIG_I2C_SH_MOBILE) += i2c-sh_mobile.o obj-$(CONFIG_I2C_SIMTEC) += i2c-simtec.o obj-$(CONFIG_I2C_STU300) += i2c-stu300.o obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o +obj-$(CONFIG_I2C_OCTEON) += i2c-octeon.o # External I2C/SMBus adapter drivers obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o diff --git a/drivers/i2c/busses/i2c-octeon.c b/drivers/i2c/busses/i2c-octeon.c new file mode 100644 index 000000000000..60375504fa49 --- /dev/null +++ b/drivers/i2c/busses/i2c-octeon.c @@ -0,0 +1,651 @@ +/* + * (C) Copyright 2009-2010 + * Nokia Siemens Networks, michael.lawnick.ext@nsn.com + * + * Portions Copyright (C) 2010 Cavium Networks, Inc. + * + * This is a driver for the i2c adapter in Cavium Networks' OCTEON processors. + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/sched.h> +#include <linux/init.h> + +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/platform_device.h> + +#include <asm/octeon/octeon.h> + +#define DRV_NAME "i2c-octeon" + +/* The previous out-of-tree version was implicitly version 1.0. */ +#define DRV_VERSION "2.0" + +/* register offsets */ +#define SW_TWSI 0x00 +#define TWSI_INT 0x10 + +/* Controller command patterns */ +#define SW_TWSI_V 0x8000000000000000ull +#define SW_TWSI_EOP_TWSI_DATA 0x0C00000100000000ull +#define SW_TWSI_EOP_TWSI_CTL 0x0C00000200000000ull +#define SW_TWSI_EOP_TWSI_CLKCTL 0x0C00000300000000ull +#define SW_TWSI_EOP_TWSI_STAT 0x0C00000300000000ull +#define SW_TWSI_EOP_TWSI_RST 0x0C00000700000000ull +#define SW_TWSI_OP_TWSI_CLK 0x0800000000000000ull +#define SW_TWSI_R 0x0100000000000000ull + +/* Controller command and status bits */ +#define TWSI_CTL_CE 0x80 +#define TWSI_CTL_ENAB 0x40 +#define TWSI_CTL_STA 0x20 +#define TWSI_CTL_STP 0x10 +#define TWSI_CTL_IFLG 0x08 +#define TWSI_CTL_AAK 0x04 + +/* Some status values */ +#define STAT_START 0x08 +#define STAT_RSTART 0x10 +#define STAT_TXADDR_ACK 0x18 +#define STAT_TXDATA_ACK 0x28 +#define STAT_RXADDR_ACK 0x40 +#define STAT_RXDATA_ACK 0x50 +#define STAT_IDLE 0xF8 + +struct octeon_i2c { + wait_queue_head_t queue; + struct i2c_adapter adap; + int irq; + int twsi_freq; + int sys_freq; + resource_size_t twsi_phys; + void __iomem *twsi_base; + resource_size_t regsize; + struct device *dev; +}; + +/** + * octeon_i2c_write_sw - write an I2C core register. + * @i2c: The struct octeon_i2c. + * @eop_reg: Register selector. + * @data: Value to be written. + * + * The I2C core registers are accessed indirectly via the SW_TWSI CSR. + */ +static void octeon_i2c_write_sw(struct octeon_i2c *i2c, + u64 eop_reg, + u8 data) +{ + u64 tmp; + + __raw_writeq(SW_TWSI_V | eop_reg | data, i2c->twsi_base + SW_TWSI); + do { + tmp = __raw_readq(i2c->twsi_base + SW_TWSI); + } while ((tmp & SW_TWSI_V) != 0); +} + +/** + * octeon_i2c_read_sw - write an I2C core register. + * @i2c: The struct octeon_i2c. + * @eop_reg: Register selector. + * + * Returns the data. + * + * The I2C core registers are accessed indirectly via the SW_TWSI CSR. + */ +static u8 octeon_i2c_read_sw(struct octeon_i2c *i2c, u64 eop_reg) +{ + u64 tmp; + + __raw_writeq(SW_TWSI_V | eop_reg | SW_TWSI_R, i2c->twsi_base + SW_TWSI); + do { + tmp = __raw_readq(i2c->twsi_base + SW_TWSI); + } while ((tmp & SW_TWSI_V) != 0); + + return tmp & 0xFF; +} + +/** + * octeon_i2c_write_int - write the TWSI_INT register + * @i2c: The struct octeon_i2c. + * @data: Value to be written. + */ +static void octeon_i2c_write_int(struct octeon_i2c *i2c, u64 data) +{ + u64 tmp; + + __raw_writeq(data, i2c->twsi_base + TWSI_INT); + tmp = __raw_readq(i2c->twsi_base + TWSI_INT); +} + +/** + * octeon_i2c_int_enable - enable the TS interrupt. + * @i2c: The struct octeon_i2c. + * + * The interrupt will be asserted when there is non-STAT_IDLE state in + * the SW_TWSI_EOP_TWSI_STAT register. + */ +static void octeon_i2c_int_enable(struct octeon_i2c *i2c) +{ + octeon_i2c_write_int(i2c, 0x40); +} + +/** + * octeon_i2c_int_disable - disable the TS interrupt. + * @i2c: The struct octeon_i2c. + */ +static void octeon_i2c_int_disable(struct octeon_i2c *i2c) +{ + octeon_i2c_write_int(i2c, 0); +} + +/** + * octeon_i2c_unblock - unblock the bus. + * @i2c: The struct octeon_i2c. + * + * If there was a reset while a device was driving 0 to bus, + * bus is blocked. We toggle it free manually by some clock + * cycles and send a stop. + */ +static void octeon_i2c_unblock(struct octeon_i2c *i2c) +{ + int i; + + dev_dbg(i2c->dev, "%s\n", __func__); + for (i = 0; i < 9; i++) { + octeon_i2c_write_int(i2c, 0x0); + udelay(5); + octeon_i2c_write_int(i2c, 0x200); + udelay(5); + } + octeon_i2c_write_int(i2c, 0x300); + udelay(5); + octeon_i2c_write_int(i2c, 0x100); + udelay(5); + octeon_i2c_write_int(i2c, 0x0); +} + +/** + * octeon_i2c_isr - the interrupt service routine. + * @int: The irq, unused. + * @dev_id: Our struct octeon_i2c. + */ +static irqreturn_t octeon_i2c_isr(int irq, void *dev_id) +{ + struct octeon_i2c *i2c = dev_id; + + octeon_i2c_int_disable(i2c); + wake_up_interruptible(&i2c->queue); + + return IRQ_HANDLED; +} + + +static int octeon_i2c_test_iflg(struct octeon_i2c *i2c) +{ + return (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_CTL) & TWSI_CTL_IFLG) != 0; +} + +/** + * octeon_i2c_wait - wait for the IFLG to be set. + * @i2c: The struct octeon_i2c. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_wait(struct octeon_i2c *i2c) +{ + int result; + + octeon_i2c_int_enable(i2c); + + result = wait_event_interruptible_timeout(i2c->queue, + octeon_i2c_test_iflg(i2c), + i2c->adap.timeout); + + octeon_i2c_int_disable(i2c); + + if (result < 0) { + dev_dbg(i2c->dev, "%s: wait interrupted\n", __func__); + return result; + } else if (result == 0) { + dev_dbg(i2c->dev, "%s: timeout\n", __func__); + result = -ETIMEDOUT; + } + + return 0; +} + +/** + * octeon_i2c_start - send START to the bus. + * @i2c: The struct octeon_i2c. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_start(struct octeon_i2c *i2c) +{ + u8 data; + int result; + + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, + TWSI_CTL_ENAB | TWSI_CTL_STA); + + result = octeon_i2c_wait(i2c); + if (result) { + if (octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT) == STAT_IDLE) { + /* + * Controller refused to send start flag May + * be a client is holding SDA low - let's try + * to free it. + */ + octeon_i2c_unblock(i2c); + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, + TWSI_CTL_ENAB | TWSI_CTL_STA); + + result = octeon_i2c_wait(i2c); + } + if (result) + return result; + } + + data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + if ((data != STAT_START) && (data != STAT_RSTART)) { + dev_err(i2c->dev, "%s: bad status (0x%x)\n", __func__, data); + return -EIO; + } + + return 0; +} + +/** + * octeon_i2c_stop - send STOP to the bus. + * @i2c: The struct octeon_i2c. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_stop(struct octeon_i2c *i2c) +{ + u8 data; + + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, + TWSI_CTL_ENAB | TWSI_CTL_STP); + + data = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + + if (data != STAT_IDLE) { + dev_err(i2c->dev, "%s: bad status(0x%x)\n", __func__, data); + return -EIO; + } + return 0; +} + +/** + * octeon_i2c_write - send data to the bus. + * @i2c: The struct octeon_i2c. + * @target: Target address. + * @data: Pointer to the data to be sent. + * @length: Length of the data. + * + * The address is sent over the bus, then the data. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_write(struct octeon_i2c *i2c, int target, + const u8 *data, int length) +{ + int i, result; + u8 tmp; + + result = octeon_i2c_start(i2c); + if (result) + return result; + + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, target << 1); + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + + result = octeon_i2c_wait(i2c); + if (result) + return result; + + for (i = 0; i < length; i++) { + tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + if ((tmp != STAT_TXADDR_ACK) && (tmp != STAT_TXDATA_ACK)) { + dev_err(i2c->dev, + "%s: bad status before write (0x%x)\n", + __func__, tmp); + return -EIO; + } + + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, data[i]); + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + + result = octeon_i2c_wait(i2c); + if (result) + return result; + } + + return 0; +} + +/** + * octeon_i2c_read - receive data from the bus. + * @i2c: The struct octeon_i2c. + * @target: Target address. + * @data: Pointer to the location to store the datae . + * @length: Length of the data. + * + * The address is sent over the bus, then the data is read. + * + * Returns 0 on success, otherwise a negative errno. + */ +static int octeon_i2c_read(struct octeon_i2c *i2c, int target, + u8 *data, int length) +{ + int i, result; + u8 tmp; + + if (length < 1) + return -EINVAL; + + result = octeon_i2c_start(i2c); + if (result) + return result; + + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_DATA, (target<<1) | 1); + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + + result = octeon_i2c_wait(i2c); + if (result) + return result; + + for (i = 0; i < length; i++) { + tmp = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + if ((tmp != STAT_RXDATA_ACK) && (tmp != STAT_RXADDR_ACK)) { + dev_err(i2c->dev, + "%s: bad status before read (0x%x)\n", + __func__, tmp); + return -EIO; + } + + if (i+1 < length) + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, + TWSI_CTL_ENAB | TWSI_CTL_AAK); + else + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, + TWSI_CTL_ENAB); + + result = octeon_i2c_wait(i2c); + if (result) + return result; + + data[i] = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_DATA); + } + return 0; +} + +/** + * octeon_i2c_xfer - The driver's master_xfer function. + * @adap: Pointer to the i2c_adapter structure. + * @msgs: Pointer to the messages to be processed. + * @num: Length of the MSGS array. + * + * Returns the number of messages processed, or a negative errno on + * failure. + */ +static int octeon_i2c_xfer(struct i2c_adapter *adap, + struct i2c_msg *msgs, + int num) +{ + struct i2c_msg *pmsg; + int i; + int ret = 0; + struct octeon_i2c *i2c = i2c_get_adapdata(adap); + + for (i = 0; ret == 0 && i < num; i++) { + pmsg = &msgs[i]; + dev_dbg(i2c->dev, + "Doing %s %d byte(s) to/from 0x%02x - %d of %d messages\n", + pmsg->flags & I2C_M_RD ? "read" : "write", + pmsg->len, pmsg->addr, i + 1, num); + if (pmsg->flags & I2C_M_RD) + ret = octeon_i2c_read(i2c, pmsg->addr, pmsg->buf, + pmsg->len); + else + ret = octeon_i2c_write(i2c, pmsg->addr, pmsg->buf, + pmsg->len); + } + octeon_i2c_stop(i2c); + + return (ret != 0) ? ret : num; +} + +static u32 octeon_i2c_functionality(struct i2c_adapter *adap) +{ + return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL; +} + +static const struct i2c_algorithm octeon_i2c_algo = { + .master_xfer = octeon_i2c_xfer, + .functionality = octeon_i2c_functionality, +}; + +static struct i2c_adapter octeon_i2c_ops = { + .owner = THIS_MODULE, + .name = "OCTEON adapter", + .algo = &octeon_i2c_algo, + .timeout = 2, +}; + +/** + * octeon_i2c_setclock - Calculate and set clock divisors. + */ +static int __init octeon_i2c_setclock(struct octeon_i2c *i2c) +{ + int tclk, thp_base, inc, thp_idx, mdiv_idx, ndiv_idx, foscl, diff; + int thp = 0x18, mdiv = 2, ndiv = 0, delta_hz = 1000000; + + for (ndiv_idx = 0; ndiv_idx < 8 && delta_hz != 0; ndiv_idx++) { + /* + * An mdiv value of less than 2 seems to not work well + * with ds1337 RTCs, so we constrain it to larger + * values. + */ + for (mdiv_idx = 15; mdiv_idx >= 2 && delta_hz != 0; mdiv_idx--) { + /* + * For given ndiv and mdiv values check the + * two closest thp values. + */ + tclk = i2c->twsi_freq * (mdiv_idx + 1) * 10; + tclk *= (1 << ndiv_idx); + thp_base = (i2c->sys_freq / (tclk * 2)) - 1; + for (inc = 0; inc <= 1; inc++) { + thp_idx = thp_base + inc; + if (thp_idx < 5 || thp_idx > 0xff) + continue; + + foscl = i2c->sys_freq / (2 * (thp_idx + 1)); + foscl = foscl / (1 << ndiv_idx); + foscl = foscl / (mdiv_idx + 1) / 10; + diff = abs(foscl - i2c->twsi_freq); + if (diff < delta_hz) { + delta_hz = diff; + thp = thp_idx; + mdiv = mdiv_idx; + ndiv = ndiv_idx; + } + } + } + } + octeon_i2c_write_sw(i2c, SW_TWSI_OP_TWSI_CLK, thp); + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CLKCTL, (mdiv << 3) | ndiv); + + return 0; +} + +static int __init octeon_i2c_initlowlevel(struct octeon_i2c *i2c) +{ + u8 status; + int tries; + + /* disable high level controller, enable bus access */ + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_CTL, TWSI_CTL_ENAB); + + /* reset controller */ + octeon_i2c_write_sw(i2c, SW_TWSI_EOP_TWSI_RST, 0); + + for (tries = 10; tries; tries--) { + udelay(1); + status = octeon_i2c_read_sw(i2c, SW_TWSI_EOP_TWSI_STAT); + if (status == STAT_IDLE) + return 0; + } + dev_err(i2c->dev, "%s: TWSI_RST failed! (0x%x)\n", __func__, status); + return -EIO; +} + +static int __devinit octeon_i2c_probe(struct platform_device *pdev) +{ + int irq, result = 0; + struct octeon_i2c *i2c; + struct octeon_i2c_data *i2c_data; + struct resource *res_mem; + + /* All adaptors have an irq. */ + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + i2c = kzalloc(sizeof(*i2c), GFP_KERNEL); + if (!i2c) { + dev_err(&pdev->dev, "kzalloc failed\n"); + result = -ENOMEM; + goto out; + } + i2c->dev = &pdev->dev; + i2c_data = pdev->dev.platform_data; + + res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + if (res_mem == NULL) { + dev_err(i2c->dev, "found no memory resource\n"); + result = -ENXIO; + goto fail_region; + } + + if (i2c_data == NULL) { + dev_err(i2c->dev, "no I2C frequency data\n"); + result = -ENXIO; + goto fail_region; + } + + i2c->twsi_phys = res_mem->start; + i2c->regsize = resource_size(res_mem); + i2c->twsi_freq = i2c_data->i2c_freq; + i2c->sys_freq = i2c_data->sys_freq; + + if (!request_mem_region(i2c->twsi_phys, i2c->regsize, res_mem->name)) { + dev_err(i2c->dev, "request_mem_region failed\n"); + goto fail_region; + } + i2c->twsi_base = ioremap(i2c->twsi_phys, i2c->regsize); + + init_waitqueue_head(&i2c->queue); + + i2c->irq = irq; + + result = request_irq(i2c->irq, octeon_i2c_isr, 0, DRV_NAME, i2c); + if (result < 0) { + dev_err(i2c->dev, "failed to attach interrupt\n"); + goto fail_irq; + } + + result = octeon_i2c_initlowlevel(i2c); + if (result) { + dev_err(i2c->dev, "init low level failed\n"); + goto fail_add; + } + + result = octeon_i2c_setclock(i2c); + if (result) { + dev_err(i2c->dev, "clock init failed\n"); + goto fail_add; + } + + i2c->adap = octeon_i2c_ops; + i2c->adap.dev.parent = &pdev->dev; + i2c->adap.nr = pdev->id >= 0 ? pdev->id : 0; + i2c_set_adapdata(&i2c->adap, i2c); + platform_set_drvdata(pdev, i2c); + + result = i2c_add_numbered_adapter(&i2c->adap); + if (result < 0) { + dev_err(i2c->dev, "failed to add adapter\n"); + goto fail_add; + } + + dev_info(i2c->dev, "version %s\n", DRV_VERSION); + + return result; + +fail_add: + platform_set_drvdata(pdev, NULL); + free_irq(i2c->irq, i2c); +fail_irq: + iounmap(i2c->twsi_base); + release_mem_region(i2c->twsi_phys, i2c->regsize); +fail_region: + kfree(i2c); +out: + return result; +}; + +static int __devexit octeon_i2c_remove(struct platform_device *pdev) +{ + struct octeon_i2c *i2c = platform_get_drvdata(pdev); + + i2c_del_adapter(&i2c->adap); + platform_set_drvdata(pdev, NULL); + free_irq(i2c->irq, i2c); + iounmap(i2c->twsi_base); + release_mem_region(i2c->twsi_phys, i2c->regsize); + kfree(i2c); + return 0; +}; + +static struct platform_driver octeon_i2c_driver = { + .probe = octeon_i2c_probe, + .remove = __devexit_p(octeon_i2c_remove), + .driver = { + .owner = THIS_MODULE, + .name = DRV_NAME, + }, +}; + +static int __init octeon_i2c_init(void) +{ + int rv; + + rv = platform_driver_register(&octeon_i2c_driver); + return rv; +} + +static void __exit octeon_i2c_exit(void) +{ + platform_driver_unregister(&octeon_i2c_driver); +} + +MODULE_AUTHOR("Michael Lawnick <michael.lawnick.ext@nsn.com>"); +MODULE_DESCRIPTION("I2C-Bus adapter for Cavium OCTEON processors"); +MODULE_LICENSE("GPL"); +MODULE_VERSION(DRV_VERSION); +MODULE_ALIAS("platform:" DRV_NAME); + +module_init(octeon_i2c_init); +module_exit(octeon_i2c_exit); diff --git a/drivers/ide/au1xxx-ide.c b/drivers/ide/au1xxx-ide.c index 87cef0c440ad..349a67bf1a36 100644 --- a/drivers/ide/au1xxx-ide.c +++ b/drivers/ide/au1xxx-ide.c @@ -56,8 +56,8 @@ static inline void auide_insw(unsigned long port, void *addr, u32 count) chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if(!put_dest_flags(ahwif->rx_chan, (void*)addr, count << 1, - DDMA_FLAGS_NOIE)) { + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, virt_to_phys(addr), + count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } @@ -74,8 +74,8 @@ static inline void auide_outsw(unsigned long port, void *addr, u32 count) chan_tab_t *ctp; au1x_ddma_desc_t *dp; - if(!put_source_flags(ahwif->tx_chan, (void*)addr, - count << 1, DDMA_FLAGS_NOIE)) { + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, virt_to_phys(addr), + count << 1, DDMA_FLAGS_NOIE)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); return; } @@ -246,17 +246,14 @@ static int auide_build_dmatable(ide_drive_t *drive, struct ide_cmd *cmd) flags = DDMA_FLAGS_NOIE; if (iswrite) { - if(!put_source_flags(ahwif->tx_chan, - (void*) sg_virt(sg), - tc, flags)) { + if (!au1xxx_dbdma_put_source(ahwif->tx_chan, + sg_phys(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } - } else - { - if(!put_dest_flags(ahwif->rx_chan, - (void*) sg_virt(sg), - tc, flags)) { + } else { + if (!au1xxx_dbdma_put_dest(ahwif->rx_chan, + sg_phys(sg), tc, flags)) { printk(KERN_ERR "%s failed %d\n", __func__, __LINE__); } diff --git a/drivers/mmc/host/au1xmmc.c b/drivers/mmc/host/au1xmmc.c index d3f55615c099..57b21198828f 100644 --- a/drivers/mmc/host/au1xmmc.c +++ b/drivers/mmc/host/au1xmmc.c @@ -650,11 +650,11 @@ static int au1xmmc_prepare_data(struct au1xmmc_host *host, flags = DDMA_FLAGS_IE; if (host->flags & HOST_F_XMIT) { - ret = au1xxx_dbdma_put_source_flags(channel, - (void *)sg_virt(sg), len, flags); + ret = au1xxx_dbdma_put_source(channel, + sg_phys(sg), len, flags); } else { - ret = au1xxx_dbdma_put_dest_flags(channel, - (void *)sg_virt(sg), len, flags); + ret = au1xxx_dbdma_put_dest(channel, + sg_phys(sg), len, flags); } if (!ret) @@ -1017,6 +1017,10 @@ static int __devinit au1xmmc_probe(struct platform_device *pdev) } else mmc->caps |= MMC_CAP_NEEDS_POLL; + /* platform may not be able to use all advertised caps */ + if (host->platdata) + mmc->caps &= ~(host->platdata->mask_host_caps); + tasklet_init(&host->data_task, au1xmmc_tasklet_data, (unsigned long)host); diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 2de0cc823d60..2bb03a8b9ef1 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -251,12 +251,6 @@ config MTD_NETtel help Support for flash chips on NETtel/SecureEdge/SnapGear boards. -config MTD_ALCHEMY - tristate "AMD Alchemy Pb1xxx/Db1xxx/RDK MTD support" - depends on SOC_AU1X00 && MTD_PARTITIONS && MTD_CFI - help - Flash memory access on AMD Alchemy Pb/Db/RDK Reference Boards - config MTD_DILNETPC tristate "CFI Flash device mapped on DIL/Net PC" depends on X86 && MTD_CONCAT && MTD_PARTITIONS && MTD_CFI_INTELEXT && BROKEN diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index ce315214ff2b..a44919f3f3d2 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -40,7 +40,6 @@ obj-$(CONFIG_MTD_SCx200_DOCFLASH)+= scx200_docflash.o obj-$(CONFIG_MTD_DBOX2) += dbox2-flash.o obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o obj-$(CONFIG_MTD_PCI) += pci.o -obj-$(CONFIG_MTD_ALCHEMY) += alchemy-flash.o obj-$(CONFIG_MTD_AUTCPU12) += autcpu12-nvram.o obj-$(CONFIG_MTD_EDB7312) += edb7312.o obj-$(CONFIG_MTD_IMPA7) += impa7.o diff --git a/drivers/mtd/maps/alchemy-flash.c b/drivers/mtd/maps/alchemy-flash.c deleted file mode 100644 index 845ad4f2a542..000000000000 --- a/drivers/mtd/maps/alchemy-flash.c +++ /dev/null @@ -1,166 +0,0 @@ -/* - * Flash memory access on AMD Alchemy evaluation boards - * - * (C) 2003, 2004 Pete Popov <ppopov@embeddedalley.com> - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> - -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/io.h> - -#ifdef CONFIG_MIPS_PB1000 -#define BOARD_MAP_NAME "Pb1000 Flash" -#define BOARD_FLASH_SIZE 0x00800000 /* 8MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_PB1500 -#define BOARD_MAP_NAME "Pb1500 Flash" -#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_PB1100 -#define BOARD_MAP_NAME "Pb1100 Flash" -#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_PB1550 -#define BOARD_MAP_NAME "Pb1550 Flash" -#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_PB1200 -#define BOARD_MAP_NAME "Pb1200 Flash" -#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ -#define BOARD_FLASH_WIDTH 2 /* 16-bits */ -#endif - -#ifdef CONFIG_MIPS_DB1000 -#define BOARD_MAP_NAME "Db1000 Flash" -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_DB1500 -#define BOARD_MAP_NAME "Db1500 Flash" -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_DB1100 -#define BOARD_MAP_NAME "Db1100 Flash" -#define BOARD_FLASH_SIZE 0x02000000 /* 32MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_DB1550 -#define BOARD_MAP_NAME "Db1550 Flash" -#define BOARD_FLASH_SIZE 0x08000000 /* 128MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#endif - -#ifdef CONFIG_MIPS_DB1200 -#define BOARD_MAP_NAME "Db1200 Flash" -#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ -#define BOARD_FLASH_WIDTH 2 /* 16-bits */ -#endif - -#ifdef CONFIG_MIPS_BOSPORUS -#define BOARD_MAP_NAME "Bosporus Flash" -#define BOARD_FLASH_SIZE 0x01000000 /* 16MB */ -#define BOARD_FLASH_WIDTH 2 /* 16-bits */ -#endif - -#ifdef CONFIG_MIPS_MIRAGE -#define BOARD_MAP_NAME "Mirage Flash" -#define BOARD_FLASH_SIZE 0x04000000 /* 64MB */ -#define BOARD_FLASH_WIDTH 4 /* 32-bits */ -#define USE_LOCAL_ACCESSORS /* why? */ -#endif - -static struct map_info alchemy_map = { - .name = BOARD_MAP_NAME, -}; - -static struct mtd_partition alchemy_partitions[] = { - { - .name = "User FS", - .size = BOARD_FLASH_SIZE - 0x00400000, - .offset = 0x0000000 - },{ - .name = "YAMON", - .size = 0x0100000, - .offset = MTDPART_OFS_APPEND, - .mask_flags = MTD_WRITEABLE - },{ - .name = "raw kernel", - .size = (0x300000 - 0x40000), /* last 256KB is yamon env */ - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct mtd_info *mymtd; - -static int __init alchemy_mtd_init(void) -{ - struct mtd_partition *parts; - int nb_parts = 0; - unsigned long window_addr; - unsigned long window_size; - - /* Default flash buswidth */ - alchemy_map.bankwidth = BOARD_FLASH_WIDTH; - - window_addr = 0x20000000 - BOARD_FLASH_SIZE; - window_size = BOARD_FLASH_SIZE; - - /* - * Static partition definition selection - */ - parts = alchemy_partitions; - nb_parts = ARRAY_SIZE(alchemy_partitions); - alchemy_map.size = window_size; - - /* - * Now let's probe for the actual flash. Do it here since - * specific machine settings might have been set above. - */ - printk(KERN_NOTICE BOARD_MAP_NAME ": probing %d-bit flash bus\n", - alchemy_map.bankwidth*8); - alchemy_map.virt = ioremap(window_addr, window_size); - mymtd = do_map_probe("cfi_probe", &alchemy_map); - if (!mymtd) { - iounmap(alchemy_map.virt); - return -ENXIO; - } - mymtd->owner = THIS_MODULE; - - add_mtd_partitions(mymtd, parts, nb_parts); - return 0; -} - -static void __exit alchemy_mtd_cleanup(void) -{ - if (mymtd) { - del_mtd_partitions(mymtd); - map_destroy(mymtd); - iounmap(alchemy_map.virt); - } -} - -module_init(alchemy_mtd_init); -module_exit(alchemy_mtd_cleanup); - -MODULE_AUTHOR("Embedded Alley Solutions, Inc"); -MODULE_DESCRIPTION(BOARD_MAP_NAME " MTD driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 92c334ff4508..43d46e424040 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -19,6 +19,7 @@ #include <asm/io.h> #include <asm/mach-au1x00/au1xxx.h> +#include <asm/mach-db1x00/bcsr.h> /* * MTD structure for NAND controller @@ -475,7 +476,8 @@ static int __init au1xxx_nand_init(void) /* set gpio206 high */ au_writel(au_readl(GPIO2_DIR) & ~(1 << 6), GPIO2_DIR); - boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr->status >> 6) & 0x1); + boot_swapboot = (au_readl(MEM_STSTAT) & (0x7 << 1)) | ((bcsr_read(BCSR_STATUS) >> 6) & 0x1); + switch (boot_swapboot) { case 0: case 2: diff --git a/drivers/net/au1000_eth.c b/drivers/net/au1000_eth.c index 6bac04603a88..6e5a68ecde09 100644 --- a/drivers/net/au1000_eth.c +++ b/drivers/net/au1000_eth.c @@ -55,6 +55,7 @@ #include <linux/delay.h> #include <linux/crc32.h> #include <linux/phy.h> +#include <linux/platform_device.h> #include <asm/cpu.h> #include <asm/mipsregs.h> @@ -63,6 +64,7 @@ #include <asm/processor.h> #include <au1000.h> +#include <au1xxx_eth.h> #include <prom.h> #include "au1000_eth.h" @@ -112,15 +114,15 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES]; * * PHY detection algorithm * - * If AU1XXX_PHY_STATIC_CONFIG is undefined, the PHY setup is + * If phy_static_config is undefined, the PHY setup is * autodetected: * * mii_probe() first searches the current MAC's MII bus for a PHY, - * selecting the first (or last, if AU1XXX_PHY_SEARCH_HIGHEST_ADDR is + * selecting the first (or last, if phy_search_highest_addr is * defined) PHY address not already claimed by another netdev. * * If nothing was found that way when searching for the 2nd ethernet - * controller's PHY and AU1XXX_PHY1_SEARCH_ON_MAC0 is defined, then + * controller's PHY and phy1_search_mac0 is defined, then * the first MII bus is searched as well for an unclaimed PHY; this is * needed in case of a dual-PHY accessible only through the MAC0's MII * bus. @@ -129,9 +131,7 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES]; * controller is not registered to the network subsystem. */ -/* autodetection defaults */ -#undef AU1XXX_PHY_SEARCH_HIGHEST_ADDR -#define AU1XXX_PHY1_SEARCH_ON_MAC0 +/* autodetection defaults: phy1_search_mac0 */ /* static PHY setup * @@ -148,29 +148,6 @@ struct au1000_private *au_macs[NUM_ETH_INTERFACES]; * specific irq-map */ -#if defined(CONFIG_MIPS_BOSPORUS) -/* - * Micrel/Kendin 5 port switch attached to MAC0, - * MAC0 is associated with PHY address 5 (== WAN port) - * MAC1 is not associated with any PHY, since it's connected directly - * to the switch. - * no interrupts are used - */ -# define AU1XXX_PHY_STATIC_CONFIG - -# define AU1XXX_PHY0_ADDR 5 -# define AU1XXX_PHY0_BUSID 0 -# undef AU1XXX_PHY0_IRQ - -# undef AU1XXX_PHY1_ADDR -# undef AU1XXX_PHY1_BUSID -# undef AU1XXX_PHY1_IRQ -#endif - -#if defined(AU1XXX_PHY0_BUSID) && (AU1XXX_PHY0_BUSID > 0) -# error MAC0-associated PHY attached 2nd MACs MII bus not supported yet -#endif - static void enable_mac(struct net_device *dev, int force_reset) { unsigned long flags; @@ -390,67 +367,55 @@ static int mii_probe (struct net_device *dev) struct au1000_private *const aup = netdev_priv(dev); struct phy_device *phydev = NULL; -#if defined(AU1XXX_PHY_STATIC_CONFIG) - BUG_ON(aup->mac_id < 0 || aup->mac_id > 1); + if (aup->phy_static_config) { + BUG_ON(aup->mac_id < 0 || aup->mac_id > 1); - if(aup->mac_id == 0) { /* get PHY0 */ -# if defined(AU1XXX_PHY0_ADDR) - phydev = au_macs[AU1XXX_PHY0_BUSID]->mii_bus->phy_map[AU1XXX_PHY0_ADDR]; -# else - printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n", - dev->name); - return 0; -# endif /* defined(AU1XXX_PHY0_ADDR) */ - } else if (aup->mac_id == 1) { /* get PHY1 */ -# if defined(AU1XXX_PHY1_ADDR) - phydev = au_macs[AU1XXX_PHY1_BUSID]->mii_bus->phy_map[AU1XXX_PHY1_ADDR]; -# else - printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n", - dev->name); + if (aup->phy_addr) + phydev = aup->mii_bus->phy_map[aup->phy_addr]; + else + printk (KERN_INFO DRV_NAME ":%s: using PHY-less setup\n", + dev->name); return 0; -# endif /* defined(AU1XXX_PHY1_ADDR) */ - } - -#else /* defined(AU1XXX_PHY_STATIC_CONFIG) */ - int phy_addr; - - /* find the first (lowest address) PHY on the current MAC's MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) - if (aup->mii_bus->phy_map[phy_addr]) { - phydev = aup->mii_bus->phy_map[phy_addr]; -# if !defined(AU1XXX_PHY_SEARCH_HIGHEST_ADDR) - break; /* break out with first one found */ -# endif - } + } else { + int phy_addr; + + /* find the first (lowest address) PHY on the current MAC's MII bus */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) + if (aup->mii_bus->phy_map[phy_addr]) { + phydev = aup->mii_bus->phy_map[phy_addr]; + if (!aup->phy_search_highest_addr) + break; /* break out with first one found */ + } -# if defined(AU1XXX_PHY1_SEARCH_ON_MAC0) - /* try harder to find a PHY */ - if (!phydev && (aup->mac_id == 1)) { - /* no PHY found, maybe we have a dual PHY? */ - printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, " - "let's see if it's attached to MAC0...\n"); + if (aup->phy1_search_mac0) { + /* try harder to find a PHY */ + if (!phydev && (aup->mac_id == 1)) { + /* no PHY found, maybe we have a dual PHY? */ + printk (KERN_INFO DRV_NAME ": no PHY found on MAC1, " + "let's see if it's attached to MAC0...\n"); - BUG_ON(!au_macs[0]); + /* find the first (lowest address) non-attached PHY on + * the MAC0 MII bus */ + for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { + struct phy_device *const tmp_phydev = + aup->mii_bus->phy_map[phy_addr]; - /* find the first (lowest address) non-attached PHY on - * the MAC0 MII bus */ - for (phy_addr = 0; phy_addr < PHY_MAX_ADDR; phy_addr++) { - struct phy_device *const tmp_phydev = - au_macs[0]->mii_bus->phy_map[phy_addr]; + if (aup->mac_id == 1) + break; - if (!tmp_phydev) - continue; /* no PHY here... */ + if (!tmp_phydev) + continue; /* no PHY here... */ - if (tmp_phydev->attached_dev) - continue; /* already claimed by MAC0 */ + if (tmp_phydev->attached_dev) + continue; /* already claimed by MAC0 */ - phydev = tmp_phydev; - break; /* found it */ + phydev = tmp_phydev; + break; /* found it */ + } + } } } -# endif /* defined(AU1XXX_PHY1_SEARCH_OTHER_BUS) */ -#endif /* defined(AU1XXX_PHY_STATIC_CONFIG) */ if (!phydev) { printk (KERN_ERR DRV_NAME ":%s: no PHY found\n", dev->name); return -1; @@ -578,31 +543,6 @@ setup_hw_rings(struct au1000_private *aup, u32 rx_base, u32 tx_base) } } -static struct { - u32 base_addr; - u32 macen_addr; - int irq; - struct net_device *dev; -} iflist[2] = { -#ifdef CONFIG_SOC_AU1000 - {AU1000_ETH0_BASE, AU1000_MAC0_ENABLE, AU1000_MAC0_DMA_INT}, - {AU1000_ETH1_BASE, AU1000_MAC1_ENABLE, AU1000_MAC1_DMA_INT} -#endif -#ifdef CONFIG_SOC_AU1100 - {AU1100_ETH0_BASE, AU1100_MAC0_ENABLE, AU1100_MAC0_DMA_INT} -#endif -#ifdef CONFIG_SOC_AU1500 - {AU1500_ETH0_BASE, AU1500_MAC0_ENABLE, AU1500_MAC0_DMA_INT}, - {AU1500_ETH1_BASE, AU1500_MAC1_ENABLE, AU1500_MAC1_DMA_INT} -#endif -#ifdef CONFIG_SOC_AU1550 - {AU1550_ETH0_BASE, AU1550_MAC0_ENABLE, AU1550_MAC0_DMA_INT}, - {AU1550_ETH1_BASE, AU1550_MAC1_ENABLE, AU1550_MAC1_DMA_INT} -#endif -}; - -static int num_ifs; - /* * ethtool operations */ @@ -711,7 +651,6 @@ static int au1000_init(struct net_device *dev) static inline void update_rx_stats(struct net_device *dev, u32 status) { - struct au1000_private *aup = netdev_priv(dev); struct net_device_stats *ps = &dev->stats; ps->rx_packets++; @@ -969,7 +908,7 @@ static netdev_tx_t au1000_tx(struct sk_buff *skb, struct net_device *dev) } pDB = aup->tx_db_inuse[aup->tx_head]; - skb_copy_from_linear_data(skb, pDB->vaddr, skb->len); + skb_copy_from_linear_data(skb, (void *)pDB->vaddr, skb->len); if (skb->len < ETH_ZLEN) { for (i=skb->len; i<ETH_ZLEN; i++) { ((char *)pDB->vaddr)[i] = 0; @@ -1058,53 +997,59 @@ static const struct net_device_ops au1000_netdev_ops = { .ndo_change_mtu = eth_change_mtu, }; -static struct net_device * au1000_probe(int port_num) +static int __devinit au1000_probe(struct platform_device *pdev) { static unsigned version_printed = 0; struct au1000_private *aup = NULL; + struct au1000_eth_platform_data *pd; struct net_device *dev = NULL; db_dest_t *pDB, *pDBfree; + int irq, i, err = 0; + struct resource *base, *macen; char ethaddr[6]; - int irq, i, err; - u32 base, macen; - if (port_num >= NUM_ETH_INTERFACES) - return NULL; + base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!base) { + printk(KERN_ERR DRV_NAME ": failed to retrieve base register\n"); + err = -ENODEV; + goto out; + } - base = CPHYSADDR(iflist[port_num].base_addr ); - macen = CPHYSADDR(iflist[port_num].macen_addr); - irq = iflist[port_num].irq; + macen = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!macen) { + printk(KERN_ERR DRV_NAME ": failed to retrieve MAC Enable register\n"); + err = -ENODEV; + goto out; + } - if (!request_mem_region( base, MAC_IOSIZE, "Au1x00 ENET") || - !request_mem_region(macen, 4, "Au1x00 ENET")) - return NULL; + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + printk(KERN_ERR DRV_NAME ": failed to retrieve IRQ\n"); + err = -ENODEV; + goto out; + } - if (version_printed++ == 0) - printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR); + if (!request_mem_region(base->start, resource_size(base), pdev->name)) { + printk(KERN_ERR DRV_NAME ": failed to request memory region for base registers\n"); + err = -ENXIO; + goto out; + } + + if (!request_mem_region(macen->start, resource_size(macen), pdev->name)) { + printk(KERN_ERR DRV_NAME ": failed to request memory region for MAC enable register\n"); + err = -ENXIO; + goto err_request; + } dev = alloc_etherdev(sizeof(struct au1000_private)); if (!dev) { printk(KERN_ERR "%s: alloc_etherdev failed\n", DRV_NAME); - return NULL; + err = -ENOMEM; + goto err_alloc; } - dev->base_addr = base; - dev->irq = irq; - dev->netdev_ops = &au1000_netdev_ops; - SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); - dev->watchdog_timeo = ETH_TX_TIMEOUT; - - err = register_netdev(dev); - if (err != 0) { - printk(KERN_ERR "%s: Cannot register net device, error %d\n", - DRV_NAME, err); - free_netdev(dev); - return NULL; - } - - printk("%s: Au1xx0 Ethernet found at 0x%x, irq %d\n", - dev->name, base, irq); - + SET_NETDEV_DEV(dev, &pdev->dev); + platform_set_drvdata(pdev, dev); aup = netdev_priv(dev); spin_lock_init(&aup->lock); @@ -1115,21 +1060,29 @@ static struct net_device * au1000_probe(int port_num) (NUM_TX_BUFFS + NUM_RX_BUFFS), &aup->dma_addr, 0); if (!aup->vaddr) { - free_netdev(dev); - release_mem_region( base, MAC_IOSIZE); - release_mem_region(macen, 4); - return NULL; + printk(KERN_ERR DRV_NAME ": failed to allocate data buffers\n"); + err = -ENOMEM; + goto err_vaddr; } /* aup->mac is the base address of the MAC's registers */ - aup->mac = (volatile mac_reg_t *)iflist[port_num].base_addr; + aup->mac = (volatile mac_reg_t *)ioremap_nocache(base->start, resource_size(base)); + if (!aup->mac) { + printk(KERN_ERR DRV_NAME ": failed to ioremap MAC registers\n"); + err = -ENXIO; + goto err_remap1; + } - /* Setup some variables for quick register address access */ - aup->enable = (volatile u32 *)iflist[port_num].macen_addr; - aup->mac_id = port_num; - au_macs[port_num] = aup; + /* Setup some variables for quick register address access */ + aup->enable = (volatile u32 *)ioremap_nocache(macen->start, resource_size(macen)); + if (!aup->enable) { + printk(KERN_ERR DRV_NAME ": failed to ioremap MAC enable register\n"); + err = -ENXIO; + goto err_remap2; + } + aup->mac_id = pdev->id; - if (port_num == 0) { + if (pdev->id == 0) { if (prom_get_ethernet_addr(ethaddr) == 0) memcpy(au1000_mac_addr, ethaddr, sizeof(au1000_mac_addr)); else { @@ -1139,7 +1092,7 @@ static struct net_device * au1000_probe(int port_num) } setup_hw_rings(aup, MAC0_RX_DMA_ADDR, MAC0_TX_DMA_ADDR); - } else if (port_num == 1) + } else if (pdev->id == 1) setup_hw_rings(aup, MAC1_RX_DMA_ADDR, MAC1_TX_DMA_ADDR); /* @@ -1147,14 +1100,37 @@ static struct net_device * au1000_probe(int port_num) * to match those that are printed on their stickers */ memcpy(dev->dev_addr, au1000_mac_addr, sizeof(au1000_mac_addr)); - dev->dev_addr[5] += port_num; + dev->dev_addr[5] += pdev->id; *aup->enable = 0; aup->mac_enabled = 0; + pd = pdev->dev.platform_data; + if (!pd) { + printk(KERN_INFO DRV_NAME ": no platform_data passed, PHY search on MAC0\n"); + aup->phy1_search_mac0 = 1; + } else { + aup->phy_static_config = pd->phy_static_config; + aup->phy_search_highest_addr = pd->phy_search_highest_addr; + aup->phy1_search_mac0 = pd->phy1_search_mac0; + aup->phy_addr = pd->phy_addr; + aup->phy_busid = pd->phy_busid; + aup->phy_irq = pd->phy_irq; + } + + if (aup->phy_busid && aup->phy_busid > 0) { + printk(KERN_ERR DRV_NAME ": MAC0-associated PHY attached 2nd MACs MII" + "bus not supported yet\n"); + err = -ENODEV; + goto err_mdiobus_alloc; + } + aup->mii_bus = mdiobus_alloc(); - if (aup->mii_bus == NULL) - goto err_out; + if (aup->mii_bus == NULL) { + printk(KERN_ERR DRV_NAME ": failed to allocate mdiobus structure\n"); + err = -ENOMEM; + goto err_mdiobus_alloc; + } aup->mii_bus->priv = dev; aup->mii_bus->read = au1000_mdiobus_read; @@ -1168,23 +1144,19 @@ static struct net_device * au1000_probe(int port_num) for(i = 0; i < PHY_MAX_ADDR; ++i) aup->mii_bus->irq[i] = PHY_POLL; - /* if known, set corresponding PHY IRQs */ -#if defined(AU1XXX_PHY_STATIC_CONFIG) -# if defined(AU1XXX_PHY0_IRQ) - if (AU1XXX_PHY0_BUSID == aup->mac_id) - aup->mii_bus->irq[AU1XXX_PHY0_ADDR] = AU1XXX_PHY0_IRQ; -# endif -# if defined(AU1XXX_PHY1_IRQ) - if (AU1XXX_PHY1_BUSID == aup->mac_id) - aup->mii_bus->irq[AU1XXX_PHY1_ADDR] = AU1XXX_PHY1_IRQ; -# endif -#endif - mdiobus_register(aup->mii_bus); + if (aup->phy_static_config) + if (aup->phy_irq && aup->phy_busid == aup->mac_id) + aup->mii_bus->irq[aup->phy_addr] = aup->phy_irq; + + err = mdiobus_register(aup->mii_bus); + if (err) { + printk(KERN_ERR DRV_NAME " failed to register MDIO bus\n"); + goto err_mdiobus_reg; + } - if (mii_probe(dev) != 0) { + if (mii_probe(dev) != 0) goto err_out; - } pDBfree = NULL; /* setup the data buffer descriptors and attach a buffer to each one */ @@ -1216,19 +1188,35 @@ static struct net_device * au1000_probe(int port_num) aup->tx_db_inuse[i] = pDB; } + dev->base_addr = base->start; + dev->irq = irq; + dev->netdev_ops = &au1000_netdev_ops; + SET_ETHTOOL_OPS(dev, &au1000_ethtool_ops); + dev->watchdog_timeo = ETH_TX_TIMEOUT; + /* * The boot code uses the ethernet controller, so reset it to start * fresh. au1000_init() expects that the device is in reset state. */ reset_mac(dev); - return dev; + err = register_netdev(dev); + if (err) { + printk(KERN_ERR DRV_NAME "%s: Cannot register net device, aborting.\n", + dev->name); + goto err_out; + } + + printk("%s: Au1xx0 Ethernet found at 0x%lx, irq %d\n", + dev->name, (unsigned long)base->start, irq); + if (version_printed++ == 0) + printk("%s version %s %s\n", DRV_NAME, DRV_VERSION, DRV_AUTHOR); + + return 0; err_out: - if (aup->mii_bus != NULL) { + if (aup->mii_bus != NULL) mdiobus_unregister(aup->mii_bus); - mdiobus_free(aup->mii_bus); - } /* here we should have a valid dev plus aup-> register addresses * so we can reset the mac properly.*/ @@ -1242,67 +1230,84 @@ err_out: if (aup->tx_db_inuse[i]) ReleaseDB(aup, aup->tx_db_inuse[i]); } +err_mdiobus_reg: + mdiobus_free(aup->mii_bus); +err_mdiobus_alloc: + iounmap(aup->enable); +err_remap2: + iounmap(aup->mac); +err_remap1: dma_free_noncoherent(NULL, MAX_BUF_SIZE * (NUM_TX_BUFFS + NUM_RX_BUFFS), (void *)aup->vaddr, aup->dma_addr); - unregister_netdev(dev); +err_vaddr: free_netdev(dev); - release_mem_region( base, MAC_IOSIZE); - release_mem_region(macen, 4); - return NULL; +err_alloc: + release_mem_region(macen->start, resource_size(macen)); +err_request: + release_mem_region(base->start, resource_size(base)); +out: + return err; } -/* - * Setup the base address and interrupt of the Au1xxx ethernet macs - * based on cpu type and whether the interface is enabled in sys_pinfunc - * register. The last interface is enabled if SYS_PF_NI2 (bit 4) is 0. - */ -static int __init au1000_init_module(void) +static int __devexit au1000_remove(struct platform_device *pdev) { - int ni = (int)((au_readl(SYS_PINFUNC) & (u32)(SYS_PF_NI2)) >> 4); - struct net_device *dev; - int i, found_one = 0; + struct net_device *dev = platform_get_drvdata(pdev); + struct au1000_private *aup = netdev_priv(dev); + int i; + struct resource *base, *macen; - num_ifs = NUM_ETH_INTERFACES - ni; + platform_set_drvdata(pdev, NULL); + + unregister_netdev(dev); + mdiobus_unregister(aup->mii_bus); + mdiobus_free(aup->mii_bus); + + for (i = 0; i < NUM_RX_DMA; i++) + if (aup->rx_db_inuse[i]) + ReleaseDB(aup, aup->rx_db_inuse[i]); + + for (i = 0; i < NUM_TX_DMA; i++) + if (aup->tx_db_inuse[i]) + ReleaseDB(aup, aup->tx_db_inuse[i]); + + dma_free_noncoherent(NULL, MAX_BUF_SIZE * + (NUM_TX_BUFFS + NUM_RX_BUFFS), + (void *)aup->vaddr, aup->dma_addr); + + iounmap(aup->mac); + iounmap(aup->enable); + + base = platform_get_resource(pdev, IORESOURCE_MEM, 0); + release_mem_region(base->start, resource_size(base)); + + macen = platform_get_resource(pdev, IORESOURCE_MEM, 1); + release_mem_region(macen->start, resource_size(macen)); + + free_netdev(dev); - for(i = 0; i < num_ifs; i++) { - dev = au1000_probe(i); - iflist[i].dev = dev; - if (dev) - found_one++; - } - if (!found_one) - return -ENODEV; return 0; } -static void __exit au1000_cleanup_module(void) +static struct platform_driver au1000_eth_driver = { + .probe = au1000_probe, + .remove = __devexit_p(au1000_remove), + .driver = { + .name = "au1000-eth", + .owner = THIS_MODULE, + }, +}; +MODULE_ALIAS("platform:au1000-eth"); + + +static int __init au1000_init_module(void) +{ + return platform_driver_register(&au1000_eth_driver); +} + +static void __exit au1000_exit_module(void) { - int i, j; - struct net_device *dev; - struct au1000_private *aup; - - for (i = 0; i < num_ifs; i++) { - dev = iflist[i].dev; - if (dev) { - aup = netdev_priv(dev); - unregister_netdev(dev); - mdiobus_unregister(aup->mii_bus); - mdiobus_free(aup->mii_bus); - for (j = 0; j < NUM_RX_DMA; j++) - if (aup->rx_db_inuse[j]) - ReleaseDB(aup, aup->rx_db_inuse[j]); - for (j = 0; j < NUM_TX_DMA; j++) - if (aup->tx_db_inuse[j]) - ReleaseDB(aup, aup->tx_db_inuse[j]); - dma_free_noncoherent(NULL, MAX_BUF_SIZE * - (NUM_TX_BUFFS + NUM_RX_BUFFS), - (void *)aup->vaddr, aup->dma_addr); - release_mem_region(dev->base_addr, MAC_IOSIZE); - release_mem_region(CPHYSADDR(iflist[i].macen_addr), 4); - free_netdev(dev); - } - } + platform_driver_unregister(&au1000_eth_driver); } module_init(au1000_init_module); -module_exit(au1000_cleanup_module); +module_exit(au1000_exit_module); diff --git a/drivers/net/au1000_eth.h b/drivers/net/au1000_eth.h index 824ecd5ff3a8..f9d29a29b8fd 100644 --- a/drivers/net/au1000_eth.h +++ b/drivers/net/au1000_eth.h @@ -108,6 +108,15 @@ struct au1000_private { struct phy_device *phy_dev; struct mii_bus *mii_bus; + /* PHY configuration */ + int phy_static_config; + int phy_search_highest_addr; + int phy1_search_mac0; + + int phy_addr; + int phy_busid; + int phy_irq; + /* These variables are just for quick access to certain regs addresses. */ volatile mac_reg_t *mac; /* mac registers */ volatile u32 *enable; /* address of MAC Enable Register */ diff --git a/drivers/net/cpmac.c b/drivers/net/cpmac.c index 8d0be26f94e3..bf2072e54200 100644 --- a/drivers/net/cpmac.c +++ b/drivers/net/cpmac.c @@ -36,6 +36,7 @@ #include <linux/phy_fixed.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/clk.h> #include <asm/gpio.h> #include <asm/atomic.h> @@ -294,9 +295,16 @@ static int cpmac_mdio_write(struct mii_bus *bus, int phy_id, static int cpmac_mdio_reset(struct mii_bus *bus) { + struct clk *cpmac_clk; + + cpmac_clk = clk_get(&bus->dev, "cpmac"); + if (IS_ERR(cpmac_clk)) { + printk(KERN_ERR "unable to get cpmac clock\n"); + return -1; + } ar7_device_reset(AR7_RESET_BIT_MDIO); cpmac_write(bus->priv, CPMAC_MDIO_CONTROL, MDIOC_ENABLE | - MDIOC_CLKDIV(ar7_cpmac_freq() / 2200000 - 1)); + MDIOC_CLKDIV(clk_get_rate(cpmac_clk) / 2200000 - 1)); return 0; } diff --git a/drivers/net/irda/au1k_ir.c b/drivers/net/irda/au1k_ir.c index 9b2eebdbb25b..b5cbd39d0685 100644 --- a/drivers/net/irda/au1k_ir.c +++ b/drivers/net/irda/au1k_ir.c @@ -36,6 +36,7 @@ #include <asm/pb1000.h> #elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) #include <asm/db1x00.h> +#include <asm/mach-db1x00/bcsr.h> #else #error au1k_ir: unsupported board #endif @@ -66,10 +67,6 @@ static char version[] __devinitdata = #define RUN_AT(x) (jiffies + (x)) -#if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) -static BCSR * const bcsr = (BCSR *)0xAE000000; -#endif - static DEFINE_SPINLOCK(ir_lock); /* @@ -282,9 +279,8 @@ static int au1k_irda_net_init(struct net_device *dev) #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) /* power on */ - bcsr->resets &= ~BCSR_RESETS_IRDA_MODE_MASK; - bcsr->resets |= BCSR_RESETS_IRDA_MODE_FULL; - au_sync(); + bcsr_mod(BCSR_RESETS, BCSR_RESETS_IRDA_MODE_MASK, + BCSR_RESETS_IRDA_MODE_FULL); #endif return 0; @@ -720,14 +716,14 @@ au1k_irda_set_speed(struct net_device *dev, int speed) if (speed == 4000000) { #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr->resets |= BCSR_RESETS_FIR_SEL; + bcsr_mod(BCSR_RESETS, 0, BCSR_RESETS_FIR_SEL); #else /* Pb1000 and Pb1100 */ writel(1<<13, CPLD_AUX1); #endif } else { #if defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) - bcsr->resets &= ~BCSR_RESETS_FIR_SEL; + bcsr_mod(BCSR_RESETS, BCSR_RESETS_FIR_SEL, 0); #else /* Pb1000 and Pb1100 */ writel(readl(CPLD_AUX1) & ~(1<<13), CPLD_AUX1); #endif diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index e8f35dac2d51..0a6601c76809 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -173,6 +173,27 @@ config PCMCIA_AU1X00 tristate "Au1x00 pcmcia support" depends on SOC_AU1X00 && PCMCIA +config PCMCIA_ALCHEMY_DEVBOARD + tristate "Alchemy Db/Pb1xxx PCMCIA socket services" + depends on SOC_AU1X00 && PCMCIA + select 64BIT_PHYS_ADDR + help + Enable this driver of you want PCMCIA support on your Alchemy + Db1000, Db/Pb1100, Db/Pb1500, Db/Pb1550, Db/Pb1200 board. + NOT suitable for the PB1000! + + This driver is also available as a module called db1xxx_ss.ko + +config PCMCIA_XXS1500 + tristate "MyCable XXS1500 PCMCIA socket support" + depends on PCMCIA && MIPS_XXS1500 + select 64BIT_PHYS_ADDR + help + Support for the PCMCIA/CF socket interface on MyCable XXS1500 + systems. + + This driver is also available as a module called xxs1500_ss.ko + config PCMCIA_BCM63XX tristate "bcm63xx pcmcia support" depends on BCM63XX && PCMCIA diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 3c83f68c803a..381b031d9d75 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -35,18 +35,10 @@ obj-$(CONFIG_OMAP_CF) += omap_cf.o obj-$(CONFIG_BFIN_CFPCMCIA) += bfin_cf_pcmcia.o obj-$(CONFIG_AT91_CF) += at91_cf.o obj-$(CONFIG_ELECTRA_CF) += electra_cf.o +obj-$(CONFIG_PCMCIA_ALCHEMY_DEVBOARD) += db1xxx_ss.o au1x00_ss-y += au1000_generic.o au1x00_ss-$(CONFIG_MIPS_PB1000) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_PB1100) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_PB1200) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_PB1500) += au1000_pb1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1000) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1100) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1200) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1500) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_DB1550) += au1000_db1x00.o -au1x00_ss-$(CONFIG_MIPS_XXS1500) += au1000_xxs1500.o sa1111_cs-y += sa1111_generic.o sa1111_cs-$(CONFIG_ASSABET_NEPONSET) += sa1100_neponset.o @@ -76,3 +68,5 @@ pxa2xx-obj-$(CONFIG_MACH_E740) += pxa2xx_e740.o pxa2xx-obj-$(CONFIG_MACH_STARGATE2) += pxa2xx_stargate2.o obj-$(CONFIG_PCMCIA_PXA2XX) += pxa2xx_base.o $(pxa2xx-obj-y) + +obj-$(CONFIG_PCMCIA_XXS1500) += xxs1500_ss.o diff --git a/drivers/pcmcia/au1000_db1x00.c b/drivers/pcmcia/au1000_db1x00.c deleted file mode 100644 index c78d77fd7e3b..000000000000 --- a/drivers/pcmcia/au1000_db1x00.c +++ /dev/null @@ -1,305 +0,0 @@ -/* - * - * Alchemy Semi Db1x00 boards specific pcmcia routines. - * - * Copyright 2002 MontaVista Software Inc. - * Author: MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * Copyright 2004 Pete Popov, updated the driver to 2.6. - * Followed the sa11xx API and largely copied many of the hardware - * independent functions. - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ - -#include <linux/module.h> -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/interrupt.h> -#include <linux/device.h> -#include <linux/init.h> - -#include <asm/irq.h> -#include <asm/signal.h> -#include <asm/mach-au1x00/au1000.h> - -#if defined(CONFIG_MIPS_DB1200) - #include <db1200.h> -#elif defined(CONFIG_MIPS_PB1200) - #include <pb1200.h> -#else - #include <asm/mach-db1x00/db1x00.h> - static BCSR * const bcsr = (BCSR *)BCSR_KSEG1_ADDR; -#endif - -#include "au1000_generic.h" - -#if 0 -#define debug(x,args...) printk(KERN_DEBUG "%s: " x, __func__ , ##args) -#else -#define debug(x,args...) -#endif - - -struct au1000_pcmcia_socket au1000_pcmcia_socket[PCMCIA_NUM_SOCKS]; -extern int au1x00_pcmcia_socket_probe(struct device *, struct pcmcia_low_level *, int, int); - -static int db1x00_pcmcia_hw_init(struct au1000_pcmcia_socket *skt) -{ -#ifdef CONFIG_MIPS_DB1550 - skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_3; -#elif defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - skt->irq = skt->nr ? BOARD_PC1_INT : BOARD_PC0_INT; -#else - skt->irq = skt->nr ? AU1000_GPIO_5 : AU1000_GPIO_2; -#endif - return 0; -} - -static void db1x00_pcmcia_shutdown(struct au1000_pcmcia_socket *skt) -{ - bcsr->pcmcia = 0; /* turn off power */ - au_sync_delay(2); -} - -static void -db1x00_pcmcia_socket_state(struct au1000_pcmcia_socket *skt, struct pcmcia_state *state) -{ - u32 inserted; - unsigned char vs; - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - switch (skt->nr) { - case 0: - vs = bcsr->status & 0x3; -#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - inserted = BOARD_CARD_INSERTED(0); -#else - inserted = !(bcsr->status & (1<<4)); -#endif - break; - case 1: - vs = (bcsr->status & 0xC)>>2; -#if defined(CONFIG_MIPS_DB1200) || defined(CONFIG_MIPS_PB1200) - inserted = BOARD_CARD_INSERTED(1); -#else - inserted = !(bcsr->status & (1<<5)); -#endif - break; - default:/* should never happen */ - return; - } - - if (inserted) - debug("db1x00 socket %d: inserted %d, vs %d pcmcia %x\n", - skt->nr, inserted, vs, bcsr->pcmcia); - - if (inserted) { - switch (vs) { - case 0: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - break; - default: - /* return without setting 'detect' */ - printk(KERN_ERR "db1x00 bad VS (%d)\n", - vs); - } - state->detect = 1; - state->ready = 1; - } - else { - /* if the card was previously inserted and then ejected, - * we should turn off power to it - */ - if ((skt->nr == 0) && (bcsr->pcmcia & BCSR_PCMCIA_PC0RST)) { - bcsr->pcmcia &= ~(BCSR_PCMCIA_PC0RST | - BCSR_PCMCIA_PC0DRVEN | - BCSR_PCMCIA_PC0VPP | - BCSR_PCMCIA_PC0VCC); - au_sync_delay(10); - } - else if ((skt->nr == 1) && bcsr->pcmcia & BCSR_PCMCIA_PC1RST) { - bcsr->pcmcia &= ~(BCSR_PCMCIA_PC1RST | - BCSR_PCMCIA_PC1DRVEN | - BCSR_PCMCIA_PC1VPP | - BCSR_PCMCIA_PC1VCC); - au_sync_delay(10); - } - } - - state->bvd1=1; - state->bvd2=1; - state->wrprot=0; -} - -static int -db1x00_pcmcia_configure_socket(struct au1000_pcmcia_socket *skt, struct socket_state_t *state) -{ - u16 pwr; - int sock = skt->nr; - - debug("config_skt %d Vcc %dV Vpp %dV, reset %d\n", - sock, state->Vcc, state->Vpp, - state->flags & SS_RESET); - - /* pcmcia reg was set to zero at init time. Be careful when - * initializing a socket not to wipe out the settings of the - * other socket. - */ - pwr = bcsr->pcmcia; - pwr &= ~(0xf << sock*8); /* clear voltage settings */ - - state->Vpp = 0; - switch(state->Vcc){ - case 0: /* Vcc 0 */ - pwr |= SET_VCC_VPP(0,0,sock); - break; - case 50: /* Vcc 5V */ - switch(state->Vpp) { - case 0: - pwr |= SET_VCC_VPP(2,0,sock); - break; - case 50: - pwr |= SET_VCC_VPP(2,1,sock); - break; - case 12: - pwr |= SET_VCC_VPP(2,2,sock); - break; - case 33: - default: - pwr |= SET_VCC_VPP(0,0,sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - state->Vcc, - state->Vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(state->Vpp) { - case 0: - pwr |= SET_VCC_VPP(1,0,sock); - break; - case 12: - pwr |= SET_VCC_VPP(1,2,sock); - break; - case 33: - pwr |= SET_VCC_VPP(1,1,sock); - break; - case 50: - default: - pwr |= SET_VCC_VPP(0,0,sock); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - state->Vcc, - state->Vpp); - break; - } - break; - default: /* what's this ? */ - pwr |= SET_VCC_VPP(0,0,sock); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, state->Vcc); - break; - } - - bcsr->pcmcia = pwr; - au_sync_delay(300); - - if (sock == 0) { - if (!(state->flags & SS_RESET)) { - pwr |= BCSR_PCMCIA_PC0DRVEN; - bcsr->pcmcia = pwr; - au_sync_delay(300); - pwr |= BCSR_PCMCIA_PC0RST; - bcsr->pcmcia = pwr; - au_sync_delay(100); - } - else { - pwr &= ~(BCSR_PCMCIA_PC0RST | BCSR_PCMCIA_PC0DRVEN); - bcsr->pcmcia = pwr; - au_sync_delay(100); - } - } - else { - if (!(state->flags & SS_RESET)) { - pwr |= BCSR_PCMCIA_PC1DRVEN; - bcsr->pcmcia = pwr; - au_sync_delay(300); - pwr |= BCSR_PCMCIA_PC1RST; - bcsr->pcmcia = pwr; - au_sync_delay(100); - } - else { - pwr &= ~(BCSR_PCMCIA_PC1RST | BCSR_PCMCIA_PC1DRVEN); - bcsr->pcmcia = pwr; - au_sync_delay(100); - } - } - return 0; -} - -/* - * Enable card status IRQs on (re-)initialisation. This can - * be called at initialisation, power management event, or - * pcmcia event. - */ -void db1x00_socket_init(struct au1000_pcmcia_socket *skt) -{ - /* nothing to do for now */ -} - -/* - * Disable card status IRQs and PCMCIA bus on suspend. - */ -void db1x00_socket_suspend(struct au1000_pcmcia_socket *skt) -{ - /* nothing to do for now */ -} - -struct pcmcia_low_level db1x00_pcmcia_ops = { - .owner = THIS_MODULE, - - .hw_init = db1x00_pcmcia_hw_init, - .hw_shutdown = db1x00_pcmcia_shutdown, - - .socket_state = db1x00_pcmcia_socket_state, - .configure_socket = db1x00_pcmcia_configure_socket, - - .socket_init = db1x00_socket_init, - .socket_suspend = db1x00_socket_suspend -}; - -int au1x_board_init(struct device *dev) -{ - int ret = -ENODEV; - bcsr->pcmcia = 0; /* turn off power, if it's not already off */ - au_sync_delay(2); - ret = au1x00_pcmcia_socket_probe(dev, &db1x00_pcmcia_ops, 0, 2); - return ret; -} diff --git a/drivers/pcmcia/au1000_generic.c b/drivers/pcmcia/au1000_generic.c index 02088704ac2c..171c8a654887 100644 --- a/drivers/pcmcia/au1000_generic.c +++ b/drivers/pcmcia/au1000_generic.c @@ -405,18 +405,16 @@ int au1x00_pcmcia_socket_probe(struct device *dev, struct pcmcia_low_level *ops, skt->virt_io = (void *) (ioremap((phys_t)AU1X_SOCK0_IO, 0x1000) - (u32)mips_io_port_base); - skt->phys_attr = AU1X_SOCK0_PSEUDO_PHYS_ATTR; - skt->phys_mem = AU1X_SOCK0_PSEUDO_PHYS_MEM; + skt->phys_attr = AU1X_SOCK0_PHYS_ATTR; + skt->phys_mem = AU1X_SOCK0_PHYS_MEM; } -#ifndef CONFIG_MIPS_XXS1500 else { skt->virt_io = (void *) (ioremap((phys_t)AU1X_SOCK1_IO, 0x1000) - (u32)mips_io_port_base); - skt->phys_attr = AU1X_SOCK1_PSEUDO_PHYS_ATTR; - skt->phys_mem = AU1X_SOCK1_PSEUDO_PHYS_MEM; + skt->phys_attr = AU1X_SOCK1_PHYS_ATTR; + skt->phys_mem = AU1X_SOCK1_PHYS_MEM; } -#endif pcmcia_base_vaddrs[i] = (u32 *)skt->virt_io; ret = ops->hw_init(skt); diff --git a/drivers/pcmcia/au1000_generic.h b/drivers/pcmcia/au1000_generic.h index 13a4fbc58711..a324d329dea6 100644 --- a/drivers/pcmcia/au1000_generic.h +++ b/drivers/pcmcia/au1000_generic.h @@ -36,30 +36,14 @@ #define AU1X_SOCK0_IO 0xF00000000ULL #define AU1X_SOCK0_PHYS_ATTR 0xF40000000ULL #define AU1X_SOCK0_PHYS_MEM 0xF80000000ULL -/* pseudo 32 bit phys addresses, which get fixed up to the - * real 36 bit address in fixup_bigphys_addr() */ -#define AU1X_SOCK0_PSEUDO_PHYS_ATTR 0xF4000000 -#define AU1X_SOCK0_PSEUDO_PHYS_MEM 0xF8000000 /* pcmcia socket 1 needs external glue logic so the memory map * differs from board to board. */ -#if defined(CONFIG_MIPS_PB1000) || defined(CONFIG_MIPS_PB1100) || \ - defined(CONFIG_MIPS_PB1500) || defined(CONFIG_MIPS_PB1550) || \ - defined(CONFIG_MIPS_PB1200) +#if defined(CONFIG_MIPS_PB1000) #define AU1X_SOCK1_IO 0xF08000000ULL #define AU1X_SOCK1_PHYS_ATTR 0xF48000000ULL #define AU1X_SOCK1_PHYS_MEM 0xF88000000ULL -#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4800000 -#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8800000 -#elif defined(CONFIG_MIPS_DB1000) || defined(CONFIG_MIPS_DB1100) || \ - defined(CONFIG_MIPS_DB1500) || defined(CONFIG_MIPS_DB1550) || \ - defined(CONFIG_MIPS_DB1200) -#define AU1X_SOCK1_IO 0xF04000000ULL -#define AU1X_SOCK1_PHYS_ATTR 0xF44000000ULL -#define AU1X_SOCK1_PHYS_MEM 0xF84000000ULL -#define AU1X_SOCK1_PSEUDO_PHYS_ATTR 0xF4400000 -#define AU1X_SOCK1_PSEUDO_PHYS_MEM 0xF8400000 #endif struct pcmcia_state { diff --git a/drivers/pcmcia/au1000_pb1x00.c b/drivers/pcmcia/au1000_pb1x00.c index b1984ed72d1d..5a979cb8f3e6 100644 --- a/drivers/pcmcia/au1000_pb1x00.c +++ b/drivers/pcmcia/au1000_pb1x00.c @@ -1,6 +1,6 @@ /* * - * Alchemy Semi Pb1x00 boards specific pcmcia routines. + * Alchemy Semi Pb1000 boards specific pcmcia routines. * * Copyright 2002 MontaVista Software Inc. * Author: MontaVista Software, Inc. @@ -46,20 +46,11 @@ #define debug(fmt, arg...) do { } while (0) -#ifdef CONFIG_MIPS_PB1000 #include <asm/pb1000.h> #define PCMCIA_IRQ AU1000_GPIO_15 -#elif defined (CONFIG_MIPS_PB1500) -#include <asm/pb1500.h> -#define PCMCIA_IRQ AU1500_GPIO_203 -#elif defined (CONFIG_MIPS_PB1100) -#include <asm/pb1100.h> -#define PCMCIA_IRQ AU1000_GPIO_11 -#endif static int pb1x00_pcmcia_init(struct pcmcia_init *init) { -#ifdef CONFIG_MIPS_PB1000 u16 pcr; pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; @@ -74,21 +65,10 @@ static int pb1x00_pcmcia_init(struct pcmcia_init *init) au_sync_delay(20); return PCMCIA_NUM_SOCKS; - -#else /* fixme -- take care of the Pb1500 at some point */ - - u16 pcr; - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */ - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(500); - return PCMCIA_NUM_SOCKS; -#endif } static int pb1x00_pcmcia_shutdown(void) { -#ifdef CONFIG_MIPS_PB1000 u16 pcr; pcr = PCR_SLOT_0_RST | PCR_SLOT_1_RST; pcr |= SET_VCC_VPP(VCC_HIZ,VPP_HIZ,0); @@ -96,14 +76,6 @@ static int pb1x00_pcmcia_shutdown(void) au_writel(pcr, PB1000_PCR); au_sync_delay(20); return 0; -#else - u16 pcr; - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; /* turn off power */ - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(2); - return 0; -#endif } static int @@ -112,21 +84,11 @@ pb1x00_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) u32 inserted0, inserted1; u16 vs0, vs1; -#ifdef CONFIG_MIPS_PB1000 vs0 = vs1 = (u16)au_readl(PB1000_ACR1); inserted0 = !(vs0 & (ACR1_SLOT_0_CD1 | ACR1_SLOT_0_CD2)); inserted1 = !(vs1 & (ACR1_SLOT_1_CD1 | ACR1_SLOT_1_CD2)); vs0 = (vs0 >> 4) & 0x3; vs1 = (vs1 >> 12) & 0x3; -#else - vs0 = (au_readw(BOARD_STATUS_REG) >> 4) & 0x3; -#ifdef CONFIG_MIPS_PB1500 - inserted0 = !((au_readl(GPIO2_PINSTATE) >> 1) & 0x1); /* gpio 201 */ -#else /* Pb1100 */ - inserted0 = !((au_readl(SYS_PINSTATERD) >> 9) & 0x1); /* gpio 9 */ -#endif - inserted1 = 0; -#endif state->ready = 0; state->vs_Xv = 0; @@ -203,7 +165,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) if(configure->sock > PCMCIA_MAX_SOCK) return -1; -#ifdef CONFIG_MIPS_PB1000 pcr = au_readl(PB1000_PCR); if (configure->sock == 0) { @@ -323,84 +284,6 @@ pb1x00_pcmcia_configure_socket(const struct pcmcia_configure *configure) au_writel(pcr, PB1000_PCR); au_sync_delay(300); -#else - - pcr = au_readw(PCMCIA_BOARD_REG) & ~0xf; - - debug("Vcc %dV Vpp %dV, pcr %x, reset %d\n", - configure->vcc, configure->vpp, pcr, configure->reset); - - - switch(configure->vcc){ - case 0: /* Vcc 0 */ - pcr |= SET_VCC_VPP(0,0); - break; - case 50: /* Vcc 5V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(2,0); - break; - case 50: - pcr |= SET_VCC_VPP(2,1); - break; - case 12: - pcr |= SET_VCC_VPP(2,2); - break; - case 33: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - case 33: /* Vcc 3.3V */ - switch(configure->vpp) { - case 0: - pcr |= SET_VCC_VPP(1,0); - break; - case 12: - pcr |= SET_VCC_VPP(1,2); - break; - case 33: - pcr |= SET_VCC_VPP(1,1); - break; - case 50: - default: - pcr |= SET_VCC_VPP(0,0); - printk("%s: bad Vcc/Vpp (%d:%d)\n", - __func__, - configure->vcc, - configure->vpp); - break; - } - break; - default: /* what's this ? */ - pcr |= SET_VCC_VPP(0,0); - printk(KERN_ERR "%s: bad Vcc %d\n", - __func__, configure->vcc); - break; - } - - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(300); - - if (!configure->reset) { - pcr |= PC_DRV_EN; - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - pcr |= PC_DEASSERT_RST; - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - } - else { - pcr &= ~(PC_DEASSERT_RST | PC_DRV_EN); - au_writew(pcr, PCMCIA_BOARD_REG); - au_sync_delay(100); - } -#endif return 0; } diff --git a/drivers/pcmcia/au1000_xxs1500.c b/drivers/pcmcia/au1000_xxs1500.c deleted file mode 100644 index b43d47b50819..000000000000 --- a/drivers/pcmcia/au1000_xxs1500.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * - * MyCable board specific pcmcia routines. - * - * Copyright 2003 MontaVista Software Inc. - * Author: Pete Popov, MontaVista Software, Inc. - * ppopov@mvista.com or source@mvista.com - * - * ######################################################################## - * - * This program is free software; you can distribute it and/or modify it - * under the terms of the GNU General Public License (Version 2) as - * published by the Free Software Foundation. - * - * This program is distributed in the hope it will be useful, but WITHOUT - * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or - * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License - * for more details. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. - * - * ######################################################################## - * - * - */ -#include <linux/module.h> -#include <linux/init.h> -#include <linux/delay.h> -#include <linux/ioport.h> -#include <linux/kernel.h> -#include <linux/timer.h> -#include <linux/mm.h> -#include <linux/proc_fs.h> -#include <linux/types.h> - -#include <pcmcia/cs_types.h> -#include <pcmcia/cs.h> -#include <pcmcia/ss.h> -#include <pcmcia/cistpl.h> -#include <pcmcia/bus_ops.h> - -#include <asm/io.h> -#include <asm/irq.h> -#include <asm/system.h> - -#include <asm/au1000.h> -#include <asm/au1000_pcmcia.h> - -#define PCMCIA_MAX_SOCK 0 -#define PCMCIA_NUM_SOCKS (PCMCIA_MAX_SOCK + 1) -#define PCMCIA_IRQ AU1000_GPIO_4 - -#if 0 -#define DEBUG(x, args...) printk(__func__ ": " x, ##args) -#else -#define DEBUG(x,args...) -#endif - -static int xxs1500_pcmcia_init(struct pcmcia_init *init) -{ - return PCMCIA_NUM_SOCKS; -} - -static int xxs1500_pcmcia_shutdown(void) -{ - /* turn off power */ - au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30), - GPIO2_OUTPUT); - au_sync_delay(100); - - /* assert reset */ - au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20), - GPIO2_OUTPUT); - au_sync_delay(100); - return 0; -} - - -static int -xxs1500_pcmcia_socket_state(unsigned sock, struct pcmcia_state *state) -{ - u32 inserted; u32 vs; - unsigned long gpio, gpio2; - - if(sock > PCMCIA_MAX_SOCK) return -1; - - gpio = au_readl(SYS_PINSTATERD); - gpio2 = au_readl(GPIO2_PINSTATE); - - vs = gpio2 & ((1<<8) | (1<<9)); - inserted = (!(gpio & 0x1) && !(gpio & 0x2)); - - state->ready = 0; - state->vs_Xv = 0; - state->vs_3v = 0; - state->detect = 0; - - if (inserted) { - switch (vs) { - case 0: - case 1: - case 2: - state->vs_3v=1; - break; - case 3: /* 5V */ - default: - /* return without setting 'detect' */ - printk(KERN_ERR "au1x00_cs: unsupported VS\n", - vs); - return; - } - state->detect = 1; - } - - if (state->detect) { - state->ready = 1; - } - - state->bvd1= gpio2 & (1<<10); - state->bvd2 = gpio2 & (1<<11); - state->wrprot=0; - return 1; -} - - -static int xxs1500_pcmcia_get_irq_info(struct pcmcia_irq_info *info) -{ - - if(info->sock > PCMCIA_MAX_SOCK) return -1; - info->irq = PCMCIA_IRQ; - return 0; -} - - -static int -xxs1500_pcmcia_configure_socket(const struct pcmcia_configure *configure) -{ - - if(configure->sock > PCMCIA_MAX_SOCK) return -1; - - DEBUG("Vcc %dV Vpp %dV, reset %d\n", - configure->vcc, configure->vpp, configure->reset); - - switch(configure->vcc){ - case 33: /* Vcc 3.3V */ - /* turn on power */ - DEBUG("turn on power\n"); - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<14))|(1<<30), - GPIO2_OUTPUT); - au_sync_delay(100); - break; - case 50: /* Vcc 5V */ - default: /* what's this ? */ - printk(KERN_ERR "au1x00_cs: unsupported VCC\n"); - case 0: /* Vcc 0 */ - /* turn off power */ - au_sync_delay(100); - au_writel(au_readl(GPIO2_PINSTATE) | (1<<14)|(1<<30), - GPIO2_OUTPUT); - break; - } - - if (!configure->reset) { - DEBUG("deassert reset\n"); - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<4))|(1<<20), - GPIO2_OUTPUT); - au_sync_delay(100); - au_writel((au_readl(GPIO2_PINSTATE) & ~(1<<5))|(1<<21), - GPIO2_OUTPUT); - } - else { - DEBUG("assert reset\n"); - au_writel(au_readl(GPIO2_PINSTATE) | (1<<4)|(1<<20), - GPIO2_OUTPUT); - } - au_sync_delay(100); - return 0; -} - -struct pcmcia_low_level xxs1500_pcmcia_ops = { - xxs1500_pcmcia_init, - xxs1500_pcmcia_shutdown, - xxs1500_pcmcia_socket_state, - xxs1500_pcmcia_get_irq_info, - xxs1500_pcmcia_configure_socket -}; diff --git a/drivers/pcmcia/db1xxx_ss.c b/drivers/pcmcia/db1xxx_ss.c new file mode 100644 index 000000000000..3889cf07d6ce --- /dev/null +++ b/drivers/pcmcia/db1xxx_ss.c @@ -0,0 +1,623 @@ +/* + * PCMCIA socket code for the Alchemy Db1xxx/Pb1xxx boards. + * + * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com> + * + */ + +/* This is a fairly generic PCMCIA socket driver suitable for the + * following Alchemy Development boards: + * Db1000, Db/Pb1500, Db/Pb1100, Db/Pb1550, Db/Pb1200. + * + * The Db1000 is used as a reference: Per-socket card-, carddetect- and + * statuschange IRQs connected to SoC GPIOs, control and status register + * bits arranged in per-socket groups in an external PLD. All boards + * listed here use this layout, including bit positions and meanings. + * Of course there are exceptions in later boards: + * + * - Pb1100/Pb1500: single socket only; voltage key bits VS are + * at STATUS[5:4] (instead of STATUS[1:0]). + * - Au1200-based: additional card-eject irqs, irqs not gpios! + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/pm.h> +#include <linux/platform_device.h> +#include <linux/resource.h> +#include <linux/spinlock.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/ss.h> + +#include <asm/mach-au1x00/au1000.h> +#include <asm/mach-db1x00/bcsr.h> + +#define MEM_MAP_SIZE 0x400000 +#define IO_MAP_SIZE 0x1000 + +struct db1x_pcmcia_sock { + struct pcmcia_socket socket; + int nr; /* socket number */ + void *virt_io; + + /* the "pseudo" addresses of the PCMCIA space. */ + phys_addr_t phys_io; + phys_addr_t phys_attr; + phys_addr_t phys_mem; + + /* previous flags for set_socket() */ + unsigned int old_flags; + + /* interrupt sources: linux irq numbers! */ + int insert_irq; /* default carddetect irq */ + int stschg_irq; /* card-status-change irq */ + int card_irq; /* card irq */ + int eject_irq; /* db1200/pb1200 have these */ + +#define BOARD_TYPE_DEFAULT 0 /* most boards */ +#define BOARD_TYPE_DB1200 1 /* IRQs aren't gpios */ +#define BOARD_TYPE_PB1100 2 /* VS bits slightly different */ + int board_type; +}; + +#define to_db1x_socket(x) container_of(x, struct db1x_pcmcia_sock, socket) + +/* DB/PB1200: check CPLD SIGSTATUS register bit 10/12 */ +static int db1200_card_inserted(struct db1x_pcmcia_sock *sock) +{ + unsigned short sigstat; + + sigstat = bcsr_read(BCSR_SIGSTAT); + return sigstat & 1 << (8 + 2 * sock->nr); +} + +/* carddetect gpio: low-active */ +static int db1000_card_inserted(struct db1x_pcmcia_sock *sock) +{ + return !gpio_get_value(irq_to_gpio(sock->insert_irq)); +} + +static int db1x_card_inserted(struct db1x_pcmcia_sock *sock) +{ + switch (sock->board_type) { + case BOARD_TYPE_DB1200: + return db1200_card_inserted(sock); + default: + return db1000_card_inserted(sock); + } +} + +/* STSCHG tends to bounce heavily when cards are inserted/ejected. + * To avoid this, the interrupt is normally disabled and only enabled + * after reset to a card has been de-asserted. + */ +static inline void set_stschg(struct db1x_pcmcia_sock *sock, int en) +{ + if (sock->stschg_irq != -1) { + if (en) + enable_irq(sock->stschg_irq); + else + disable_irq(sock->stschg_irq); + } +} + +static irqreturn_t db1000_pcmcia_cdirq(int irq, void *data) +{ + struct db1x_pcmcia_sock *sock = data; + + pcmcia_parse_events(&sock->socket, SS_DETECT); + + return IRQ_HANDLED; +} + +static irqreturn_t db1000_pcmcia_stschgirq(int irq, void *data) +{ + struct db1x_pcmcia_sock *sock = data; + + pcmcia_parse_events(&sock->socket, SS_STSCHG); + + return IRQ_HANDLED; +} + +static irqreturn_t db1200_pcmcia_cdirq(int irq, void *data) +{ + struct db1x_pcmcia_sock *sock = data; + + /* Db/Pb1200 have separate per-socket insertion and ejection + * interrupts which stay asserted as long as the card is + * inserted/missing. The one which caused us to be called + * needs to be disabled and the other one enabled. + */ + if (irq == sock->insert_irq) { + disable_irq_nosync(sock->insert_irq); + enable_irq(sock->eject_irq); + } else { + disable_irq_nosync(sock->eject_irq); + enable_irq(sock->insert_irq); + } + + pcmcia_parse_events(&sock->socket, SS_DETECT); + + return IRQ_HANDLED; +} + +static int db1x_pcmcia_setup_irqs(struct db1x_pcmcia_sock *sock) +{ + int ret; + unsigned long flags; + + if (sock->stschg_irq != -1) { + ret = request_irq(sock->stschg_irq, db1000_pcmcia_stschgirq, + 0, "pcmcia_stschg", sock); + if (ret) + return ret; + } + + /* Db/Pb1200 have separate per-socket insertion and ejection + * interrupts, which should show edge behaviour but don't. + * So interrupts are disabled until both insertion and + * ejection handler have been registered and the currently + * active one disabled. + */ + if (sock->board_type == BOARD_TYPE_DB1200) { + local_irq_save(flags); + + ret = request_irq(sock->insert_irq, db1200_pcmcia_cdirq, + IRQF_DISABLED, "pcmcia_insert", sock); + if (ret) + goto out1; + + ret = request_irq(sock->eject_irq, db1200_pcmcia_cdirq, + IRQF_DISABLED, "pcmcia_eject", sock); + if (ret) { + free_irq(sock->insert_irq, sock); + local_irq_restore(flags); + goto out1; + } + + /* disable the currently active one */ + if (db1200_card_inserted(sock)) + disable_irq_nosync(sock->insert_irq); + else + disable_irq_nosync(sock->eject_irq); + + local_irq_restore(flags); + } else { + /* all other (older) Db1x00 boards use a GPIO to show + * card detection status: use both-edge triggers. + */ + set_irq_type(sock->insert_irq, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(sock->insert_irq, db1000_pcmcia_cdirq, + 0, "pcmcia_carddetect", sock); + + if (ret) + goto out1; + } + + return 0; /* all done */ + +out1: + if (sock->stschg_irq != -1) + free_irq(sock->stschg_irq, sock); + + return ret; +} + +static void db1x_pcmcia_free_irqs(struct db1x_pcmcia_sock *sock) +{ + if (sock->stschg_irq != -1) + free_irq(sock->stschg_irq, sock); + + free_irq(sock->insert_irq, sock); + if (sock->eject_irq != -1) + free_irq(sock->eject_irq, sock); +} + +/* + * configure a PCMCIA socket on the Db1x00 series of boards (and + * compatibles). + * + * 2 external registers are involved: + * pcmcia_status (offset 0x04): bits [0:1/2:3]: read card voltage id + * pcmcia_control(offset 0x10): + * bits[0:1] set vcc for card + * bits[2:3] set vpp for card + * bit 4: enable data buffers + * bit 7: reset# for card + * add 8 for second socket. + */ +static int db1x_pcmcia_configure(struct pcmcia_socket *skt, + struct socket_state_t *state) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + unsigned short cr_clr, cr_set; + unsigned int changed; + int v, p, ret; + + /* card voltage setup */ + cr_clr = (0xf << (sock->nr * 8)); /* clear voltage settings */ + cr_set = 0; + v = p = ret = 0; + + switch (state->Vcc) { + case 50: + ++v; + case 33: + ++v; + case 0: + break; + default: + printk(KERN_INFO "pcmcia%d unsupported Vcc %d\n", + sock->nr, state->Vcc); + } + + switch (state->Vpp) { + case 12: + ++p; + case 33: + case 50: + ++p; + case 0: + break; + default: + printk(KERN_INFO "pcmcia%d unsupported Vpp %d\n", + sock->nr, state->Vpp); + } + + /* sanity check: Vpp must be 0, 12, or Vcc */ + if (((state->Vcc == 33) && (state->Vpp == 50)) || + ((state->Vcc == 50) && (state->Vpp == 33))) { + printk(KERN_INFO "pcmcia%d bad Vcc/Vpp combo (%d %d)\n", + sock->nr, state->Vcc, state->Vpp); + v = p = 0; + ret = -EINVAL; + } + + /* create new voltage code */ + cr_set |= ((v << 2) | p) << (sock->nr * 8); + + changed = state->flags ^ sock->old_flags; + + if (changed & SS_RESET) { + if (state->flags & SS_RESET) { + set_stschg(sock, 0); + /* assert reset, disable io buffers */ + cr_clr |= (1 << (7 + (sock->nr * 8))); + cr_clr |= (1 << (4 + (sock->nr * 8))); + } else { + /* de-assert reset, enable io buffers */ + cr_set |= 1 << (7 + (sock->nr * 8)); + cr_set |= 1 << (4 + (sock->nr * 8)); + } + } + + /* update PCMCIA configuration */ + bcsr_mod(BCSR_PCMCIA, cr_clr, cr_set); + + sock->old_flags = state->flags; + + /* reset was taken away: give card time to initialize properly */ + if ((changed & SS_RESET) && !(state->flags & SS_RESET)) { + msleep(500); + set_stschg(sock, 1); + } + + return ret; +} + +/* VCC bits at [3:2]/[11:10] */ +#define GET_VCC(cr, socknr) \ + ((((cr) >> 2) >> ((socknr) * 8)) & 3) + +/* VS bits at [0:1]/[3:2] */ +#define GET_VS(sr, socknr) \ + (((sr) >> (2 * (socknr))) & 3) + +/* reset bits at [7]/[15] */ +#define GET_RESET(cr, socknr) \ + ((cr) & (1 << (7 + (8 * (socknr))))) + +static int db1x_pcmcia_get_status(struct pcmcia_socket *skt, + unsigned int *value) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + unsigned short cr, sr; + unsigned int status; + + status = db1x_card_inserted(sock) ? SS_DETECT : 0; + + cr = bcsr_read(BCSR_PCMCIA); + sr = bcsr_read(BCSR_STATUS); + + /* PB1100/PB1500: voltage key bits are at [5:4] */ + if (sock->board_type == BOARD_TYPE_PB1100) + sr >>= 4; + + /* determine card type */ + switch (GET_VS(sr, sock->nr)) { + case 0: + case 2: + status |= SS_3VCARD; /* 3V card */ + case 3: + break; /* 5V card: set nothing */ + default: + status |= SS_XVCARD; /* treated as unsupported in core */ + } + + /* if Vcc is not zero, we have applied power to a card */ + status |= GET_VCC(cr, sock->nr) ? SS_POWERON : 0; + + /* reset de-asserted? then we're ready */ + status |= (GET_RESET(cr, sock->nr)) ? SS_READY : SS_RESET; + + *value = status; + + return 0; +} + +static int db1x_pcmcia_sock_init(struct pcmcia_socket *skt) +{ + return 0; +} + +static int db1x_pcmcia_sock_suspend(struct pcmcia_socket *skt) +{ + return 0; +} + +static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt, + struct pccard_io_map *map) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + + map->start = (u32)sock->virt_io; + map->stop = map->start + IO_MAP_SIZE; + + return 0; +} + +static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt, + struct pccard_mem_map *map) +{ + struct db1x_pcmcia_sock *sock = to_db1x_socket(skt); + + if (map->flags & MAP_ATTRIB) + map->static_start = sock->phys_attr + map->card_start; + else + map->static_start = sock->phys_mem + map->card_start; + + return 0; +} + +static struct pccard_operations db1x_pcmcia_operations = { + .init = db1x_pcmcia_sock_init, + .suspend = db1x_pcmcia_sock_suspend, + .get_status = db1x_pcmcia_get_status, + .set_socket = db1x_pcmcia_configure, + .set_io_map = au1x00_pcmcia_set_io_map, + .set_mem_map = au1x00_pcmcia_set_mem_map, +}; + +static int __devinit db1x_pcmcia_socket_probe(struct platform_device *pdev) +{ + struct db1x_pcmcia_sock *sock; + struct resource *r; + int ret, bid; + + sock = kzalloc(sizeof(struct db1x_pcmcia_sock), GFP_KERNEL); + if (!sock) + return -ENOMEM; + + sock->nr = pdev->id; + + bid = BCSR_WHOAMI_BOARD(bcsr_read(BCSR_WHOAMI)); + switch (bid) { + case BCSR_WHOAMI_PB1500: + case BCSR_WHOAMI_PB1500R2: + case BCSR_WHOAMI_PB1100: + sock->board_type = BOARD_TYPE_PB1100; + break; + case BCSR_WHOAMI_DB1000 ... BCSR_WHOAMI_PB1550_SDR: + sock->board_type = BOARD_TYPE_DEFAULT; + break; + case BCSR_WHOAMI_PB1200 ... BCSR_WHOAMI_DB1200: + sock->board_type = BOARD_TYPE_DB1200; + break; + default: + printk(KERN_INFO "db1xxx-ss: unknown board %d!\n", bid); + ret = -ENODEV; + goto out0; + }; + + /* + * gather resources necessary and optional nice-to-haves to + * operate a socket: + * This includes IRQs for Carddetection/ejection, the card + * itself and optional status change detection. + * Also, the memory areas covered by a socket. For these + * we require the 32bit "pseudo" addresses (see the au1000.h + * header for more information). + */ + + /* card: irq assigned to the card itself. */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "card"); + sock->card_irq = r ? r->start : 0; + + /* insert: irq which triggers on card insertion/ejection */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "insert"); + sock->insert_irq = r ? r->start : -1; + + /* stschg: irq which trigger on card status change (optional) */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "stschg"); + sock->stschg_irq = r ? r->start : -1; + + /* eject: irq which triggers on ejection (DB1200/PB1200 only) */ + r = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "eject"); + sock->eject_irq = r ? r->start : -1; + + ret = -ENODEV; + + /* + * pseudo-attr: The 32bit address of the PCMCIA attribute space + * for this socket (usually the 36bit address shifted 4 to the + * right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr"); + if (!r) { + printk(KERN_ERR "pcmcia%d has no 'pseudo-attr' resource!\n", + sock->nr); + goto out0; + } + sock->phys_attr = r->start; + + /* + * pseudo-mem: The 32bit address of the PCMCIA memory space for + * this socket (usually the 36bit address shifted 4 to the right) + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem"); + if (!r) { + printk(KERN_ERR "pcmcia%d has no 'pseudo-mem' resource!\n", + sock->nr); + goto out0; + } + sock->phys_mem = r->start; + + /* + * pseudo-io: The 32bit address of the PCMCIA IO space for this + * socket (usually the 36bit address shifted 4 to the right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io"); + if (!r) { + printk(KERN_ERR "pcmcia%d has no 'pseudo-io' resource!\n", + sock->nr); + goto out0; + } + sock->phys_io = r->start; + + /* + * PCMCIA client drivers use the inb/outb macros to access + * the IO registers. Since mips_io_port_base is added + * to the access address of the mips implementation of + * inb/outb, we need to subtract it here because we want + * to access the I/O or MEM address directly, without + * going through this "mips_io_port_base" mechanism. + */ + sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) - + mips_io_port_base); + + if (!sock->virt_io) { + printk(KERN_ERR "pcmcia%d: cannot remap IO area\n", + sock->nr); + ret = -ENOMEM; + goto out0; + } + + sock->socket.ops = &db1x_pcmcia_operations; + sock->socket.owner = THIS_MODULE; + sock->socket.pci_irq = sock->card_irq; + sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; + sock->socket.map_size = MEM_MAP_SIZE; + sock->socket.io_offset = (unsigned long)sock->virt_io; + sock->socket.dev.parent = &pdev->dev; + sock->socket.resource_ops = &pccard_static_ops; + + platform_set_drvdata(pdev, sock); + + ret = db1x_pcmcia_setup_irqs(sock); + if (ret) { + printk(KERN_ERR "pcmcia%d cannot setup interrupts\n", + sock->nr); + goto out1; + } + + set_stschg(sock, 0); + + ret = pcmcia_register_socket(&sock->socket); + if (ret) { + printk(KERN_ERR "pcmcia%d failed to register\n", sock->nr); + goto out2; + } + + printk(KERN_INFO "Alchemy Db/Pb1xxx pcmcia%d @ io/attr/mem %09llx" + "(%p) %09llx %09llx card/insert/stschg/eject irqs @ %d " + "%d %d %d\n", sock->nr, sock->phys_io, sock->virt_io, + sock->phys_attr, sock->phys_mem, sock->card_irq, + sock->insert_irq, sock->stschg_irq, sock->eject_irq); + + return 0; + +out2: + db1x_pcmcia_free_irqs(sock); +out1: + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); +out0: + kfree(sock); + return ret; +} + +static int __devexit db1x_pcmcia_socket_remove(struct platform_device *pdev) +{ + struct db1x_pcmcia_sock *sock = platform_get_drvdata(pdev); + + db1x_pcmcia_free_irqs(sock); + pcmcia_unregister_socket(&sock->socket); + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); + kfree(sock); + + return 0; +} + +#ifdef CONFIG_PM +static int db1x_pcmcia_suspend(struct device *dev) +{ + return pcmcia_socket_dev_suspend(dev); +} + +static int db1x_pcmcia_resume(struct device *dev) +{ + return pcmcia_socket_dev_resume(dev); +} + +static struct dev_pm_ops db1x_pcmcia_pmops = { + .resume = db1x_pcmcia_resume, + .suspend = db1x_pcmcia_suspend, + .thaw = db1x_pcmcia_resume, + .freeze = db1x_pcmcia_suspend, +}; + +#define DB1XXX_SS_PMOPS &db1x_pcmcia_pmops + +#else + +#define DB1XXX_SS_PMOPS NULL + +#endif + +static struct platform_driver db1x_pcmcia_socket_driver = { + .driver = { + .name = "db1xxx_pcmcia", + .owner = THIS_MODULE, + .pm = DB1XXX_SS_PMOPS + }, + .probe = db1x_pcmcia_socket_probe, + .remove = __devexit_p(db1x_pcmcia_socket_remove), +}; + +int __init db1x_pcmcia_socket_load(void) +{ + return platform_driver_register(&db1x_pcmcia_socket_driver); +} + +void __exit db1x_pcmcia_socket_unload(void) +{ + platform_driver_unregister(&db1x_pcmcia_socket_driver); +} + +module_init(db1x_pcmcia_socket_load); +module_exit(db1x_pcmcia_socket_unload); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCMCIA Socket Services for Alchemy Db/Pb1x00 boards"); +MODULE_AUTHOR("Manuel Lauss"); diff --git a/drivers/pcmcia/xxs1500_ss.c b/drivers/pcmcia/xxs1500_ss.c new file mode 100644 index 000000000000..61560cd6e287 --- /dev/null +++ b/drivers/pcmcia/xxs1500_ss.c @@ -0,0 +1,350 @@ +/* + * PCMCIA socket code for the MyCable XXS1500 system. + * + * Copyright (c) 2009 Manuel Lauss <manuel.lauss@gmail.com> + * + */ + +#include <linux/delay.h> +#include <linux/gpio.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/ioport.h> +#include <linux/mm.h> +#include <linux/platform_device.h> +#include <linux/pm.h> +#include <linux/resource.h> +#include <linux/spinlock.h> + +#include <pcmcia/cs_types.h> +#include <pcmcia/cs.h> +#include <pcmcia/ss.h> +#include <pcmcia/cistpl.h> + +#include <asm/irq.h> +#include <asm/system.h> +#include <asm/mach-au1x00/au1000.h> + +#define MEM_MAP_SIZE 0x400000 +#define IO_MAP_SIZE 0x1000 + + +/* + * 3.3V cards only; all interfacing is done via gpios: + * + * 0/1: carddetect (00 = card present, xx = huh) + * 4: card irq + * 204: reset (high-act) + * 205: buffer enable (low-act) + * 208/209: card voltage key (00,01,10,11) + * 210: battwarn + * 211: batdead + * 214: power (low-act) + */ +#define GPIO_CDA 0 +#define GPIO_CDB 1 +#define GPIO_CARDIRQ 4 +#define GPIO_RESET 204 +#define GPIO_OUTEN 205 +#define GPIO_VSL 208 +#define GPIO_VSH 209 +#define GPIO_BATTDEAD 210 +#define GPIO_BATTWARN 211 +#define GPIO_POWER 214 + +struct xxs1500_pcmcia_sock { + struct pcmcia_socket socket; + void *virt_io; + + phys_addr_t phys_io; + phys_addr_t phys_attr; + phys_addr_t phys_mem; + + /* previous flags for set_socket() */ + unsigned int old_flags; +}; + +#define to_xxs_socket(x) container_of(x, struct xxs1500_pcmcia_sock, socket) + +static irqreturn_t cdirq(int irq, void *data) +{ + struct xxs1500_pcmcia_sock *sock = data; + + pcmcia_parse_events(&sock->socket, SS_DETECT); + + return IRQ_HANDLED; +} + +static int xxs1500_pcmcia_configure(struct pcmcia_socket *skt, + struct socket_state_t *state) +{ + struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt); + unsigned int changed; + + /* power control */ + switch (state->Vcc) { + case 0: + gpio_set_value(GPIO_POWER, 1); /* power off */ + break; + case 33: + gpio_set_value(GPIO_POWER, 0); /* power on */ + break; + case 50: + default: + return -EINVAL; + } + + changed = state->flags ^ sock->old_flags; + + if (changed & SS_RESET) { + if (state->flags & SS_RESET) { + gpio_set_value(GPIO_RESET, 1); /* assert reset */ + gpio_set_value(GPIO_OUTEN, 1); /* buffers off */ + } else { + gpio_set_value(GPIO_RESET, 0); /* deassert reset */ + gpio_set_value(GPIO_OUTEN, 0); /* buffers on */ + msleep(500); + } + } + + sock->old_flags = state->flags; + + return 0; +} + +static int xxs1500_pcmcia_get_status(struct pcmcia_socket *skt, + unsigned int *value) +{ + unsigned int status; + int i; + + status = 0; + + /* check carddetects: GPIO[0:1] must both be low */ + if (!gpio_get_value(GPIO_CDA) && !gpio_get_value(GPIO_CDB)) + status |= SS_DETECT; + + /* determine card voltage: GPIO[208:209] binary value */ + i = (!!gpio_get_value(GPIO_VSL)) | ((!!gpio_get_value(GPIO_VSH)) << 1); + + switch (i) { + case 0: + case 1: + case 2: + status |= SS_3VCARD; /* 3V card */ + break; + case 3: /* 5V card, unsupported */ + default: + status |= SS_XVCARD; /* treated as unsupported in core */ + } + + /* GPIO214: low active power switch */ + status |= gpio_get_value(GPIO_POWER) ? 0 : SS_POWERON; + + /* GPIO204: high-active reset line */ + status |= gpio_get_value(GPIO_RESET) ? SS_RESET : SS_READY; + + /* other stuff */ + status |= gpio_get_value(GPIO_BATTDEAD) ? 0 : SS_BATDEAD; + status |= gpio_get_value(GPIO_BATTWARN) ? 0 : SS_BATWARN; + + *value = status; + + return 0; +} + +static int xxs1500_pcmcia_sock_init(struct pcmcia_socket *skt) +{ + gpio_direction_input(GPIO_CDA); + gpio_direction_input(GPIO_CDB); + gpio_direction_input(GPIO_VSL); + gpio_direction_input(GPIO_VSH); + gpio_direction_input(GPIO_BATTDEAD); + gpio_direction_input(GPIO_BATTWARN); + gpio_direction_output(GPIO_RESET, 1); /* assert reset */ + gpio_direction_output(GPIO_OUTEN, 1); /* disable buffers */ + gpio_direction_output(GPIO_POWER, 1); /* power off */ + + return 0; +} + +static int xxs1500_pcmcia_sock_suspend(struct pcmcia_socket *skt) +{ + return 0; +} + +static int au1x00_pcmcia_set_io_map(struct pcmcia_socket *skt, + struct pccard_io_map *map) +{ + struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt); + + map->start = (u32)sock->virt_io; + map->stop = map->start + IO_MAP_SIZE; + + return 0; +} + +static int au1x00_pcmcia_set_mem_map(struct pcmcia_socket *skt, + struct pccard_mem_map *map) +{ + struct xxs1500_pcmcia_sock *sock = to_xxs_socket(skt); + + if (map->flags & MAP_ATTRIB) + map->static_start = sock->phys_attr + map->card_start; + else + map->static_start = sock->phys_mem + map->card_start; + + return 0; +} + +static struct pccard_operations xxs1500_pcmcia_operations = { + .init = xxs1500_pcmcia_sock_init, + .suspend = xxs1500_pcmcia_sock_suspend, + .get_status = xxs1500_pcmcia_get_status, + .set_socket = xxs1500_pcmcia_configure, + .set_io_map = au1x00_pcmcia_set_io_map, + .set_mem_map = au1x00_pcmcia_set_mem_map, +}; + +static int __devinit xxs1500_pcmcia_probe(struct platform_device *pdev) +{ + struct xxs1500_pcmcia_sock *sock; + struct resource *r; + int ret, irq; + + sock = kzalloc(sizeof(struct xxs1500_pcmcia_sock), GFP_KERNEL); + if (!sock) + return -ENOMEM; + + ret = -ENODEV; + + /* + * pseudo-attr: The 32bit address of the PCMCIA attribute space + * for this socket (usually the 36bit address shifted 4 to the + * right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-attr"); + if (!r) { + dev_err(&pdev->dev, "missing 'pcmcia-attr' resource!\n"); + goto out0; + } + sock->phys_attr = r->start; + + /* + * pseudo-mem: The 32bit address of the PCMCIA memory space for + * this socket (usually the 36bit address shifted 4 to the right) + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-mem"); + if (!r) { + dev_err(&pdev->dev, "missing 'pcmcia-mem' resource!\n"); + goto out0; + } + sock->phys_mem = r->start; + + /* + * pseudo-io: The 32bit address of the PCMCIA IO space for this + * socket (usually the 36bit address shifted 4 to the right). + */ + r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pcmcia-io"); + if (!r) { + dev_err(&pdev->dev, "missing 'pcmcia-io' resource!\n"); + goto out0; + } + sock->phys_io = r->start; + + + /* + * PCMCIA client drivers use the inb/outb macros to access + * the IO registers. Since mips_io_port_base is added + * to the access address of the mips implementation of + * inb/outb, we need to subtract it here because we want + * to access the I/O or MEM address directly, without + * going through this "mips_io_port_base" mechanism. + */ + sock->virt_io = (void *)(ioremap(sock->phys_io, IO_MAP_SIZE) - + mips_io_port_base); + + if (!sock->virt_io) { + dev_err(&pdev->dev, "cannot remap IO area\n"); + ret = -ENOMEM; + goto out0; + } + + sock->socket.ops = &xxs1500_pcmcia_operations; + sock->socket.owner = THIS_MODULE; + sock->socket.pci_irq = gpio_to_irq(GPIO_CARDIRQ); + sock->socket.features = SS_CAP_STATIC_MAP | SS_CAP_PCCARD; + sock->socket.map_size = MEM_MAP_SIZE; + sock->socket.io_offset = (unsigned long)sock->virt_io; + sock->socket.dev.parent = &pdev->dev; + sock->socket.resource_ops = &pccard_static_ops; + + platform_set_drvdata(pdev, sock); + + /* setup carddetect irq: use one of the 2 GPIOs as an + * edge detector. + */ + irq = gpio_to_irq(GPIO_CDA); + set_irq_type(irq, IRQ_TYPE_EDGE_BOTH); + ret = request_irq(irq, cdirq, 0, "pcmcia_carddetect", sock); + if (ret) { + dev_err(&pdev->dev, "cannot setup cd irq\n"); + goto out1; + } + + ret = pcmcia_register_socket(&sock->socket); + if (ret) { + dev_err(&pdev->dev, "failed to register\n"); + goto out2; + } + + printk(KERN_INFO "MyCable XXS1500 PCMCIA socket services\n"); + + return 0; + +out2: + free_irq(gpio_to_irq(GPIO_CDA), sock); +out1: + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); +out0: + kfree(sock); + return ret; +} + +static int __devexit xxs1500_pcmcia_remove(struct platform_device *pdev) +{ + struct xxs1500_pcmcia_sock *sock = platform_get_drvdata(pdev); + + pcmcia_unregister_socket(&sock->socket); + free_irq(gpio_to_irq(GPIO_CDA), sock); + iounmap((void *)(sock->virt_io + (u32)mips_io_port_base)); + kfree(sock); + + return 0; +} + +static struct platform_driver xxs1500_pcmcia_socket_driver = { + .driver = { + .name = "xxs1500_pcmcia", + .owner = THIS_MODULE, + }, + .probe = xxs1500_pcmcia_probe, + .remove = __devexit_p(xxs1500_pcmcia_remove), +}; + +int __init xxs1500_pcmcia_socket_load(void) +{ + return platform_driver_register(&xxs1500_pcmcia_socket_driver); +} + +void __exit xxs1500_pcmcia_socket_unload(void) +{ + platform_driver_unregister(&xxs1500_pcmcia_socket_driver); +} + +module_init(xxs1500_pcmcia_socket_load); +module_exit(xxs1500_pcmcia_socket_unload); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("PCMCIA Socket Services for MyCable XXS1500 systems"); +MODULE_AUTHOR("Manuel Lauss"); diff --git a/drivers/serial/8250.c b/drivers/serial/8250.c index e9b15c3746fa..a81ff7bc5fa1 100644 --- a/drivers/serial/8250.c +++ b/drivers/serial/8250.c @@ -1217,12 +1217,6 @@ static void autoconfig(struct uart_8250_port *up, unsigned int probeflags) } #endif -#ifdef CONFIG_SERIAL_8250_AU1X00 - /* if access method is AU, it is a 16550 with a quirk */ - if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) - up->bugs |= UART_BUG_NOMSR; -#endif - serial_outp(up, UART_LCR, save_lcr); if (up->capabilities != uart_config[up->port.type].flags) { @@ -2428,7 +2422,7 @@ serial8250_pm(struct uart_port *port, unsigned int state, static unsigned int serial8250_port_size(struct uart_8250_port *pt) { if (pt->port.iotype == UPIO_AU) - return 0x100000; + return 0x1000; #ifdef CONFIG_ARCH_OMAP if (is_omap_port(pt)) return 0x16 << pt->port.regshift; @@ -2585,6 +2579,13 @@ static void serial8250_config_port(struct uart_port *port, int flags) if (flags & UART_CONFIG_TYPE) autoconfig(up, probeflags); + +#ifdef CONFIG_SERIAL_8250_AU1X00 + /* if access method is AU, it is a 16550 with a quirk */ + if (up->port.type == PORT_16550A && up->port.iotype == UPIO_AU) + up->bugs |= UART_BUG_NOMSR; +#endif + if (up->port.type != PORT_UNKNOWN && flags & UART_CONFIG_IRQ) autoconfig_irq(up); diff --git a/drivers/spi/au1550_spi.c b/drivers/spi/au1550_spi.c index cfd5ff9508fa..ba8ac4f599d3 100644 --- a/drivers/spi/au1550_spi.c +++ b/drivers/spi/au1550_spi.c @@ -412,11 +412,13 @@ static int au1550_spi_dma_txrxb(struct spi_device *spi, struct spi_transfer *t) } /* put buffers on the ring */ - res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, hw->rx, t->len); + res = au1xxx_dbdma_put_dest(hw->dma_rx_ch, virt_to_phys(hw->rx), + t->len, DDMA_FLAGS_IE); if (!res) dev_err(hw->dev, "rx dma put dest error\n"); - res = au1xxx_dbdma_put_source(hw->dma_tx_ch, (void *)hw->tx, t->len); + res = au1xxx_dbdma_put_source(hw->dma_tx_ch, virt_to_phys(hw->tx), + t->len, DDMA_FLAGS_IE); if (!res) dev_err(hw->dev, "tx dma put source error\n"); diff --git a/drivers/staging/octeon/Makefile b/drivers/staging/octeon/Makefile index c0a583cc2227..87447c102fa0 100644 --- a/drivers/staging/octeon/Makefile +++ b/drivers/staging/octeon/Makefile @@ -14,7 +14,6 @@ obj-${CONFIG_OCTEON_ETHERNET} := octeon-ethernet.o octeon-ethernet-objs := ethernet.o octeon-ethernet-objs += ethernet-mdio.o octeon-ethernet-objs += ethernet-mem.o -octeon-ethernet-objs += ethernet-proc.o octeon-ethernet-objs += ethernet-rgmii.o octeon-ethernet-objs += ethernet-rx.o octeon-ethernet-objs += ethernet-sgmii.o diff --git a/drivers/staging/octeon/ethernet-defines.h b/drivers/staging/octeon/ethernet-defines.h index f13131b03c33..6a2cd50a17df 100644 --- a/drivers/staging/octeon/ethernet-defines.h +++ b/drivers/staging/octeon/ethernet-defines.h @@ -41,17 +41,10 @@ * Tells the driver to populate the packet buffers with kernel skbuffs. * This allows the driver to receive packets without copying them. It also * means that 32bit userspace can't access the packet buffers. - * USE_32BIT_SHARED - * This define tells the driver to allocate memory for buffers from the - * 32bit sahred region instead of the kernel memory space. * USE_HW_TCPUDP_CHECKSUM * Controls if the Octeon TCP/UDP checksum engine is used for packet * output. If this is zero, the kernel will perform the checksum in * software. - * USE_MULTICORE_RECEIVE - * Process receive interrupts on multiple cores. This spreads the network - * load across the first 8 processors. If ths is zero, only one core - * processes incomming packets. * USE_ASYNC_IOBDMA * Use asynchronous IO access to hardware. This uses Octeon's asynchronous * IOBDMAs to issue IO accesses without stalling. Set this to zero @@ -75,29 +68,15 @@ #define CONFIG_CAVIUM_RESERVE32 0 #endif -#if CONFIG_CAVIUM_RESERVE32 -#define USE_32BIT_SHARED 1 -#define USE_SKBUFFS_IN_HW 0 -#define REUSE_SKBUFFS_WITHOUT_FREE 0 -#else -#define USE_32BIT_SHARED 0 #define USE_SKBUFFS_IN_HW 1 #ifdef CONFIG_NETFILTER #define REUSE_SKBUFFS_WITHOUT_FREE 0 #else #define REUSE_SKBUFFS_WITHOUT_FREE 1 #endif -#endif - -/* Max interrupts per second per core */ -#define INTERRUPT_LIMIT 10000 -/* Don't limit the number of interrupts */ -/*#define INTERRUPT_LIMIT 0 */ #define USE_HW_TCPUDP_CHECKSUM 1 -#define USE_MULTICORE_RECEIVE 1 - /* Enable Random Early Dropping under load */ #define USE_RED 1 #define USE_ASYNC_IOBDMA (CONFIG_CAVIUM_OCTEON_CVMSEG_SIZE > 0) @@ -115,21 +94,12 @@ /* Use this to not have FPA frees control L2 */ /*#define DONT_WRITEBACK(x) 0 */ -/* Maximum number of packets to process per interrupt. */ -#define MAX_RX_PACKETS 120 /* Maximum number of SKBs to try to free per xmit packet. */ -#define MAX_SKB_TO_FREE 10 #define MAX_OUT_QUEUE_DEPTH 1000 -#ifndef CONFIG_SMP -#undef USE_MULTICORE_RECEIVE -#define USE_MULTICORE_RECEIVE 0 -#endif - -#define IP_PROTOCOL_TCP 6 -#define IP_PROTOCOL_UDP 0x11 +#define FAU_TOTAL_TX_TO_CLEAN (CVMX_FAU_REG_END - sizeof(uint32_t)) +#define FAU_NUM_PACKET_BUFFERS_TO_FREE (FAU_TOTAL_TX_TO_CLEAN - sizeof(uint32_t)) -#define FAU_NUM_PACKET_BUFFERS_TO_FREE (CVMX_FAU_REG_END - sizeof(uint32_t)) #define TOTAL_NUMBER_OF_PORTS (CVMX_PIP_NUM_INPUT_PORTS+1) diff --git a/drivers/staging/octeon/ethernet-mdio.c b/drivers/staging/octeon/ethernet-mdio.c index 05a5cc0f43ed..7e0be8d00dc3 100644 --- a/drivers/staging/octeon/ethernet-mdio.c +++ b/drivers/staging/octeon/ethernet-mdio.c @@ -96,11 +96,11 @@ const struct ethtool_ops cvm_oct_ethtool_ops = { }; /** - * IOCTL support for PHY control - * + * cvm_oct_ioctl - IOCTL support for PHY control * @dev: Device to change * @rq: the request * @cmd: the command + * * Returns Zero on success */ int cvm_oct_ioctl(struct net_device *dev, struct ifreq *rq, int cmd) @@ -153,7 +153,7 @@ static void cvm_oct_adjust_link(struct net_device *dev) /** - * Setup the PHY + * cvm_oct_phy_setup_device - setup the PHY * * @dev: Device to setup * diff --git a/drivers/staging/octeon/ethernet-mdio.h b/drivers/staging/octeon/ethernet-mdio.h index 55d0614a7cd9..a417d4fce12c 100644 --- a/drivers/staging/octeon/ethernet-mdio.h +++ b/drivers/staging/octeon/ethernet-mdio.h @@ -32,7 +32,6 @@ #include <linux/ip.h> #include <linux/string.h> #include <linux/ethtool.h> -#include <linux/mii.h> #include <linux/seq_file.h> #include <linux/proc_fs.h> #include <net/dst.h> diff --git a/drivers/staging/octeon/ethernet-mem.c b/drivers/staging/octeon/ethernet-mem.c index b595903e2af1..00cc91df6b46 100644 --- a/drivers/staging/octeon/ethernet-mem.c +++ b/drivers/staging/octeon/ethernet-mem.c @@ -4,7 +4,7 @@ * Contact: support@caviumnetworks.com * This file is part of the OCTEON SDK * - * Copyright (c) 2003-2007 Cavium Networks + * Copyright (c) 2003-2010 Cavium Networks * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as @@ -26,8 +26,6 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> -#include <linux/mii.h> -#include <net/dst.h> #include <asm/octeon/octeon.h> @@ -36,18 +34,19 @@ #include "cvmx-fpa.h" /** - * Fill the supplied hardware pool with skbuffs - * + * cvm_oct_fill_hw_skbuff - fill the supplied hardware pool with skbuffs * @pool: Pool to allocate an skbuff for * @size: Size of the buffer needed for the pool * @elements: Number of buffers to allocate + * + * Returns the actual number of buffers allocated. */ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements) { int freed = elements; while (freed) { - struct sk_buff *skb = dev_alloc_skb(size + 128); + struct sk_buff *skb = dev_alloc_skb(size + 256); if (unlikely(skb == NULL)) { pr_warning ("Failed to allocate skb for hardware pool %d\n", @@ -55,7 +54,7 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements) break; } - skb_reserve(skb, 128 - (((unsigned long)skb->data) & 0x7f)); + skb_reserve(skb, 256 - (((unsigned long)skb->data) & 0x7f)); *(struct sk_buff **)(skb->data - sizeof(void *)) = skb; cvmx_fpa_free(skb->data, pool, DONT_WRITEBACK(size / 128)); freed--; @@ -64,8 +63,7 @@ static int cvm_oct_fill_hw_skbuff(int pool, int size, int elements) } /** - * Free the supplied hardware pool of skbuffs - * + * cvm_oct_free_hw_skbuff- free hardware pool skbuffs * @pool: Pool to allocate an skbuff for * @size: Size of the buffer needed for the pool * @elements: Number of buffers to allocate @@ -93,96 +91,76 @@ static void cvm_oct_free_hw_skbuff(int pool, int size, int elements) } /** - * This function fills a hardware pool with memory. Depending - * on the config defines, this memory might come from the - * kernel or global 32bit memory allocated with - * cvmx_bootmem_alloc. - * + * cvm_oct_fill_hw_memory - fill a hardware pool with memory. * @pool: Pool to populate * @size: Size of each buffer in the pool * @elements: Number of buffers to allocate + * + * Returns the actual number of buffers allocated. */ static int cvm_oct_fill_hw_memory(int pool, int size, int elements) { char *memory; + char *fpa; int freed = elements; - if (USE_32BIT_SHARED) { - extern uint64_t octeon_reserve32_memory; - - memory = - cvmx_bootmem_alloc_range(elements * size, 128, - octeon_reserve32_memory, - octeon_reserve32_memory + - (CONFIG_CAVIUM_RESERVE32 << 20) - - 1); - if (memory == NULL) - panic("Unable to allocate %u bytes for FPA pool %d\n", - elements * size, pool); - - pr_notice("Memory range %p - %p reserved for " - "hardware\n", memory, - memory + elements * size - 1); - - while (freed) { - cvmx_fpa_free(memory, pool, 0); - memory += size; - freed--; - } - } else { - while (freed) { - /* We need to force alignment to 128 bytes here */ - memory = kmalloc(size + 127, GFP_ATOMIC); - if (unlikely(memory == NULL)) { - pr_warning("Unable to allocate %u bytes for " - "FPA pool %d\n", - elements * size, pool); - break; - } - memory = (char *)(((unsigned long)memory + 127) & -128); - cvmx_fpa_free(memory, pool, 0); - freed--; + while (freed) { + /* + * FPA memory must be 128 byte aligned. Since we are + * aligning we need to save the original pointer so we + * can feed it to kfree when the memory is returned to + * the kernel. + * + * We allocate an extra 256 bytes to allow for + * alignment and space for the original pointer saved + * just before the block. + */ + memory = kmalloc(size + 256, GFP_ATOMIC); + if (unlikely(memory == NULL)) { + pr_warning("Unable to allocate %u bytes for FPA pool %d\n", + elements * size, pool); + break; } + fpa = (char *)(((unsigned long)memory + 256) & ~0x7fUL); + *((char **)fpa - 1) = memory; + cvmx_fpa_free(fpa, pool, 0); + freed--; } return elements - freed; } /** - * Free memory previously allocated with cvm_oct_fill_hw_memory - * + * cvm_oct_free_hw_memory - Free memory allocated by cvm_oct_fill_hw_memory * @pool: FPA pool to free * @size: Size of each buffer in the pool * @elements: Number of buffers that should be in the pool */ static void cvm_oct_free_hw_memory(int pool, int size, int elements) { - if (USE_32BIT_SHARED) { - pr_warning("Warning: 32 shared memory is not freeable\n"); - } else { - char *memory; - do { - memory = cvmx_fpa_alloc(pool); - if (memory) { - elements--; - kfree(phys_to_virt(cvmx_ptr_to_phys(memory))); - } - } while (memory); + char *memory; + char *fpa; + do { + fpa = cvmx_fpa_alloc(pool); + if (fpa) { + elements--; + fpa = (char *)phys_to_virt(cvmx_ptr_to_phys(fpa)); + memory = *((char **)fpa - 1); + kfree(memory); + } + } while (fpa); - if (elements < 0) - pr_warning("Freeing of pool %u had too many " - "buffers (%d)\n", - pool, elements); - else if (elements > 0) - pr_warning("Warning: Freeing of pool %u is " - "missing %d buffers\n", - pool, elements); - } + if (elements < 0) + pr_warning("Freeing of pool %u had too many buffers (%d)\n", + pool, elements); + else if (elements > 0) + pr_warning("Warning: Freeing of pool %u is missing %d buffers\n", + pool, elements); } int cvm_oct_mem_fill_fpa(int pool, int size, int elements) { int freed; - if (USE_SKBUFFS_IN_HW) + if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL) freed = cvm_oct_fill_hw_skbuff(pool, size, elements); else freed = cvm_oct_fill_hw_memory(pool, size, elements); @@ -191,7 +169,7 @@ int cvm_oct_mem_fill_fpa(int pool, int size, int elements) void cvm_oct_mem_empty_fpa(int pool, int size, int elements) { - if (USE_SKBUFFS_IN_HW) + if (USE_SKBUFFS_IN_HW && pool == CVMX_FPA_PACKET_POOL) cvm_oct_free_hw_skbuff(pool, size, elements); else cvm_oct_free_hw_memory(pool, size, elements); diff --git a/drivers/staging/octeon/ethernet-proc.c b/drivers/staging/octeon/ethernet-proc.c deleted file mode 100644 index 16308d484d3b..000000000000 --- a/drivers/staging/octeon/ethernet-proc.c +++ /dev/null @@ -1,144 +0,0 @@ -/********************************************************************** - * Author: Cavium Networks - * - * Contact: support@caviumnetworks.com - * This file is part of the OCTEON SDK - * - * Copyright (c) 2003-2007 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, but - * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or - * NONINFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this file; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * or visit http://www.gnu.org/licenses/. - * - * This file may also be available under a different license from Cavium. - * Contact Cavium Networks for more information -**********************************************************************/ -#include <linux/kernel.h> -#include <linux/seq_file.h> -#include <linux/proc_fs.h> -#include <net/dst.h> - -#include <asm/octeon/octeon.h> - -#include "octeon-ethernet.h" -#include "ethernet-defines.h" - -#include "cvmx-helper.h" -#include "cvmx-pip.h" - -/** - * User is reading /proc/octeon_ethernet_stats - * - * @m: - * @v: - * Returns - */ -static int cvm_oct_stats_show(struct seq_file *m, void *v) -{ - struct octeon_ethernet *priv; - int port; - - for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) { - - if (cvm_oct_device[port]) { - priv = netdev_priv(cvm_oct_device[port]); - - seq_printf(m, "\nOcteon Port %d (%s)\n", port, - cvm_oct_device[port]->name); - seq_printf(m, - "rx_packets: %12lu\t" - "tx_packets: %12lu\n", - priv->stats.rx_packets, - priv->stats.tx_packets); - seq_printf(m, - "rx_bytes: %12lu\t" - "tx_bytes: %12lu\n", - priv->stats.rx_bytes, priv->stats.tx_bytes); - seq_printf(m, - "rx_errors: %12lu\t" - "tx_errors: %12lu\n", - priv->stats.rx_errors, - priv->stats.tx_errors); - seq_printf(m, - "rx_dropped: %12lu\t" - "tx_dropped: %12lu\n", - priv->stats.rx_dropped, - priv->stats.tx_dropped); - seq_printf(m, - "rx_length_errors: %12lu\t" - "tx_aborted_errors: %12lu\n", - priv->stats.rx_length_errors, - priv->stats.tx_aborted_errors); - seq_printf(m, - "rx_over_errors: %12lu\t" - "tx_carrier_errors: %12lu\n", - priv->stats.rx_over_errors, - priv->stats.tx_carrier_errors); - seq_printf(m, - "rx_crc_errors: %12lu\t" - "tx_fifo_errors: %12lu\n", - priv->stats.rx_crc_errors, - priv->stats.tx_fifo_errors); - seq_printf(m, - "rx_frame_errors: %12lu\t" - "tx_heartbeat_errors: %12lu\n", - priv->stats.rx_frame_errors, - priv->stats.tx_heartbeat_errors); - seq_printf(m, - "rx_fifo_errors: %12lu\t" - "tx_window_errors: %12lu\n", - priv->stats.rx_fifo_errors, - priv->stats.tx_window_errors); - seq_printf(m, - "rx_missed_errors: %12lu\t" - "multicast: %12lu\n", - priv->stats.rx_missed_errors, - priv->stats.multicast); - } - } - - return 0; -} - -/** - * /proc/octeon_ethernet_stats was openned. Use the single_open iterator - * - * @inode: - * @file: - * Returns - */ -static int cvm_oct_stats_open(struct inode *inode, struct file *file) -{ - return single_open(file, cvm_oct_stats_show, NULL); -} - -static const struct file_operations cvm_oct_stats_operations = { - .open = cvm_oct_stats_open, - .read = seq_read, - .llseek = seq_lseek, - .release = single_release, -}; - -void cvm_oct_proc_initialize(void) -{ - struct proc_dir_entry *entry = - create_proc_entry("octeon_ethernet_stats", 0, NULL); - if (entry) - entry->proc_fops = &cvm_oct_stats_operations; -} - -void cvm_oct_proc_shutdown(void) -{ - remove_proc_entry("octeon_ethernet_stats", NULL); -} diff --git a/drivers/staging/octeon/ethernet-proc.h b/drivers/staging/octeon/ethernet-proc.h deleted file mode 100644 index 82c7d9f78bc4..000000000000 --- a/drivers/staging/octeon/ethernet-proc.h +++ /dev/null @@ -1,29 +0,0 @@ -/********************************************************************* - * Author: Cavium Networks - * - * Contact: support@caviumnetworks.com - * This file is part of the OCTEON SDK - * - * Copyright (c) 2003-2007 Cavium Networks - * - * This file is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License, Version 2, as - * published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, but - * AS-IS and WITHOUT ANY WARRANTY; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE, TITLE, or - * NONINFRINGEMENT. See the GNU General Public License for more - * details. - * - * You should have received a copy of the GNU General Public License - * along with this file; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - * or visit http://www.gnu.org/licenses/. - * - * This file may also be available under a different license from Cavium. - * Contact Cavium Networks for more information -*********************************************************************/ - -void cvm_oct_proc_initialize(void); -void cvm_oct_proc_shutdown(void); diff --git a/drivers/staging/octeon/ethernet-rgmii.c b/drivers/staging/octeon/ethernet-rgmii.c index 3820f1ec11d1..a0d4d4b98bdc 100644 --- a/drivers/staging/octeon/ethernet-rgmii.c +++ b/drivers/staging/octeon/ethernet-rgmii.c @@ -26,7 +26,7 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> -#include <linux/mii.h> +#include <linux/phy.h> #include <net/dst.h> #include <asm/octeon/octeon.h> @@ -48,14 +48,20 @@ static int number_rgmii_ports; static void cvm_oct_rgmii_poll(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); - unsigned long flags; + unsigned long flags = 0; cvmx_helper_link_info_t link_info; + int use_global_register_lock = (priv->phydev == NULL); - /* - * Take the global register lock since we are going to touch - * registers that affect more than one port. - */ - spin_lock_irqsave(&global_register_lock, flags); + BUG_ON(in_interrupt()); + if (use_global_register_lock) { + /* + * Take the global register lock since we are going to + * touch registers that affect more than one port. + */ + spin_lock_irqsave(&global_register_lock, flags); + } else { + mutex_lock(&priv->phydev->bus->mdio_lock); + } link_info = cvmx_helper_link_get(priv->port); if (link_info.u64 == priv->link_info) { @@ -115,7 +121,11 @@ static void cvm_oct_rgmii_poll(struct net_device *dev) dev->name); } } - spin_unlock_irqrestore(&global_register_lock, flags); + + if (use_global_register_lock) + spin_unlock_irqrestore(&global_register_lock, flags); + else + mutex_unlock(&priv->phydev->bus->mdio_lock); return; } @@ -151,7 +161,12 @@ static void cvm_oct_rgmii_poll(struct net_device *dev) link_info = cvmx_helper_link_autoconf(priv->port); priv->link_info = link_info.u64; } - spin_unlock_irqrestore(&global_register_lock, flags); + + if (use_global_register_lock) + spin_unlock_irqrestore(&global_register_lock, flags); + else { + mutex_unlock(&priv->phydev->bus->mdio_lock); + } if (priv->phydev == NULL) { /* Tell core. */ @@ -213,8 +228,11 @@ static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id) struct net_device *dev = cvm_oct_device[cvmx_helper_get_ipd_port (interface, index)]; - if (dev) - cvm_oct_rgmii_poll(dev); + struct octeon_ethernet *priv = netdev_priv(dev); + + if (dev && !atomic_read(&cvm_oct_poll_queue_stopping)) + queue_work(cvm_oct_poll_queue, &priv->port_work); + gmx_rx_int_reg.u64 = 0; gmx_rx_int_reg.s.phy_dupx = 1; gmx_rx_int_reg.s.phy_link = 1; @@ -252,8 +270,11 @@ static irqreturn_t cvm_oct_rgmii_rml_interrupt(int cpl, void *dev_id) struct net_device *dev = cvm_oct_device[cvmx_helper_get_ipd_port (interface, index)]; - if (dev) - cvm_oct_rgmii_poll(dev); + struct octeon_ethernet *priv = netdev_priv(dev); + + if (dev && !atomic_read(&cvm_oct_poll_queue_stopping)) + queue_work(cvm_oct_poll_queue, &priv->port_work); + gmx_rx_int_reg.u64 = 0; gmx_rx_int_reg.s.phy_dupx = 1; gmx_rx_int_reg.s.phy_link = 1; @@ -302,6 +323,12 @@ int cvm_oct_rgmii_stop(struct net_device *dev) return 0; } +static void cvm_oct_rgmii_immediate_poll(struct work_struct *work) +{ + struct octeon_ethernet *priv = container_of(work, struct octeon_ethernet, port_work); + cvm_oct_rgmii_poll(cvm_oct_device[priv->port]); +} + int cvm_oct_rgmii_init(struct net_device *dev) { struct octeon_ethernet *priv = netdev_priv(dev); @@ -309,7 +336,7 @@ int cvm_oct_rgmii_init(struct net_device *dev) cvm_oct_common_init(dev); dev->netdev_ops->ndo_stop(dev); - + INIT_WORK(&priv->port_work, cvm_oct_rgmii_immediate_poll); /* * Due to GMX errata in CN3XXX series chips, it is necessary * to take the link down immediately when the PHY changes @@ -397,4 +424,5 @@ void cvm_oct_rgmii_uninit(struct net_device *dev) number_rgmii_ports--; if (number_rgmii_ports == 0) free_irq(OCTEON_IRQ_RML, &number_rgmii_ports); + cancel_work_sync(&priv->port_work); } diff --git a/drivers/staging/octeon/ethernet-rx.c b/drivers/staging/octeon/ethernet-rx.c index 1b237b7e689d..cb38f9eb2cc0 100644 --- a/drivers/staging/octeon/ethernet-rx.c +++ b/drivers/staging/octeon/ethernet-rx.c @@ -4,7 +4,7 @@ * Contact: support@caviumnetworks.com * This file is part of the OCTEON SDK * - * Copyright (c) 2003-2007 Cavium Networks + * Copyright (c) 2003-2010 Cavium Networks * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as @@ -27,16 +27,14 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/cache.h> +#include <linux/cpumask.h> #include <linux/netdevice.h> #include <linux/init.h> #include <linux/etherdevice.h> #include <linux/ip.h> #include <linux/string.h> #include <linux/prefetch.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/seq_file.h> -#include <linux/proc_fs.h> +#include <linux/smp.h> #include <net/dst.h> #ifdef CONFIG_XFRM #include <linux/xfrm.h> @@ -48,8 +46,9 @@ #include <asm/octeon/octeon.h> #include "ethernet-defines.h" -#include "octeon-ethernet.h" #include "ethernet-mem.h" +#include "ethernet-rx.h" +#include "octeon-ethernet.h" #include "ethernet-util.h" #include "cvmx-helper.h" @@ -61,62 +60,88 @@ #include "cvmx-gmxx-defs.h" -struct cvm_tasklet_wrapper { - struct tasklet_struct t; -}; +struct cvm_napi_wrapper { + struct napi_struct napi; +} ____cacheline_aligned_in_smp; -/* - * Aligning the tasklet_struct on cachline boundries seems to decrease - * throughput even though in theory it would reduce contantion on the - * cache lines containing the locks. - */ +static struct cvm_napi_wrapper cvm_oct_napi[NR_CPUS] __cacheline_aligned_in_smp; -static struct cvm_tasklet_wrapper cvm_oct_tasklet[NR_CPUS]; +struct cvm_oct_core_state { + int baseline_cores; + /* + * The number of additional cores that could be processing + * input packtes. + */ + atomic_t available_cores; + cpumask_t cpu_state; +} ____cacheline_aligned_in_smp; -/** - * Interrupt handler. The interrupt occurs whenever the POW - * transitions from 0->1 packets in our group. - * - * @cpl: - * @dev_id: - * @regs: - * Returns - */ -irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id) +static struct cvm_oct_core_state core_state __cacheline_aligned_in_smp; + +static void cvm_oct_enable_napi(void *_) { - /* Acknowledge the interrupt */ - if (INTERRUPT_LIMIT) - cvmx_write_csr(CVMX_POW_WQ_INT, 1 << pow_receive_group); - else - cvmx_write_csr(CVMX_POW_WQ_INT, 0x10001 << pow_receive_group); - preempt_disable(); - tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t); - preempt_enable(); - return IRQ_HANDLED; + int cpu = smp_processor_id(); + napi_schedule(&cvm_oct_napi[cpu].napi); +} + +static void cvm_oct_enable_one_cpu(void) +{ + int v; + int cpu; + + /* Check to see if more CPUs are available for receive processing... */ + v = atomic_sub_if_positive(1, &core_state.available_cores); + if (v < 0) + return; + + /* ... if a CPU is available, Turn on NAPI polling for that CPU. */ + for_each_online_cpu(cpu) { + if (!cpu_test_and_set(cpu, core_state.cpu_state)) { + v = smp_call_function_single(cpu, cvm_oct_enable_napi, + NULL, 0); + if (v) + panic("Can't enable NAPI."); + break; + } + } +} + +static void cvm_oct_no_more_work(void) +{ + int cpu = smp_processor_id(); + + /* + * CPU zero is special. It always has the irq enabled when + * waiting for incoming packets. + */ + if (cpu == 0) { + enable_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group); + return; + } + + cpu_clear(cpu, core_state.cpu_state); + atomic_add(1, &core_state.available_cores); } -#ifdef CONFIG_NET_POLL_CONTROLLER /** - * This is called when the kernel needs to manually poll the - * device. For Octeon, this is simply calling the interrupt - * handler. We actually poll all the devices, not just the - * one supplied. + * cvm_oct_do_interrupt - interrupt handler. + * + * The interrupt occurs whenever the POW has packets in our group. * - * @dev: Device to poll. Unused */ -void cvm_oct_poll_controller(struct net_device *dev) +static irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id) { - preempt_disable(); - tasklet_schedule(&cvm_oct_tasklet[smp_processor_id()].t); - preempt_enable(); + /* Disable the IRQ and start napi_poll. */ + disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group); + cvm_oct_enable_napi(NULL); + + return IRQ_HANDLED; } -#endif /** - * This is called on receive errors, and determines if the packet - * can be dropped early-on in cvm_oct_tasklet_rx(). - * + * cvm_oct_check_rcv_error - process receive errors * @work: Work queue entry pointing to the packet. + * * Returns Non-zero if the packet can be dropped, zero otherwise. */ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work) @@ -199,19 +224,20 @@ static inline int cvm_oct_check_rcv_error(cvmx_wqe_t *work) } /** - * Tasklet function that is scheduled on a core when an interrupt occurs. + * cvm_oct_napi_poll - the NAPI poll function. + * @napi: The NAPI instance, or null if called from cvm_oct_poll_controller + * @budget: Maximum number of packets to receive. * - * @unused: + * Returns the number of packets processed. */ -void cvm_oct_tasklet_rx(unsigned long unused) +static int cvm_oct_napi_poll(struct napi_struct *napi, int budget) { - const int coreid = cvmx_get_core_num(); - uint64_t old_group_mask; - uint64_t old_scratch; - int rx_count = 0; - int number_to_free; - int num_freed; - int packet_not_copied; + const int coreid = cvmx_get_core_num(); + uint64_t old_group_mask; + uint64_t old_scratch; + int rx_count = 0; + int did_work_request = 0; + int packet_not_copied; /* Prefetch cvm_oct_device since we know we need it soon */ prefetch(cvm_oct_device); @@ -227,59 +253,63 @@ void cvm_oct_tasklet_rx(unsigned long unused) cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), (old_group_mask & ~0xFFFFull) | 1 << pow_receive_group); - if (USE_ASYNC_IOBDMA) + if (USE_ASYNC_IOBDMA) { cvmx_pow_work_request_async(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT); + did_work_request = 1; + } - while (1) { + while (rx_count < budget) { struct sk_buff *skb = NULL; + struct sk_buff **pskb = NULL; int skb_in_hw; cvmx_wqe_t *work; - if (USE_ASYNC_IOBDMA) { + if (USE_ASYNC_IOBDMA && did_work_request) work = cvmx_pow_work_response_async(CVMX_SCR_SCRATCH); - } else { - if ((INTERRUPT_LIMIT == 0) - || likely(rx_count < MAX_RX_PACKETS)) - work = - cvmx_pow_work_request_sync - (CVMX_POW_NO_WAIT); - else - work = NULL; - } + else + work = cvmx_pow_work_request_sync(CVMX_POW_NO_WAIT); + prefetch(work); - if (work == NULL) + did_work_request = 0; + if (work == NULL) { + union cvmx_pow_wq_int wq_int; + wq_int.u64 = 0; + wq_int.s.iq_dis = 1 << pow_receive_group; + wq_int.s.wq_int = 1 << pow_receive_group; + cvmx_write_csr(CVMX_POW_WQ_INT, wq_int.u64); break; + } + pskb = (struct sk_buff **)(cvm_oct_get_buffer_ptr(work->packet_ptr) - sizeof(void *)); + prefetch(pskb); - /* - * Limit each core to processing MAX_RX_PACKETS - * packets without a break. This way the RX can't - * starve the TX task. - */ - if (USE_ASYNC_IOBDMA) { - - if ((INTERRUPT_LIMIT == 0) - || likely(rx_count < MAX_RX_PACKETS)) - cvmx_pow_work_request_async_nocheck - (CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT); - else { - cvmx_scratch_write64(CVMX_SCR_SCRATCH, - 0x8000000000000000ull); - cvmx_pow_tag_sw_null_nocheck(); - } + if (USE_ASYNC_IOBDMA && rx_count < (budget - 1)) { + cvmx_pow_work_request_async_nocheck(CVMX_SCR_SCRATCH, CVMX_POW_NO_WAIT); + did_work_request = 1; + } + + if (rx_count == 0) { + /* + * First time through, see if there is enough + * work waiting to merit waking another + * CPU. + */ + union cvmx_pow_wq_int_cntx counts; + int backlog; + int cores_in_use = core_state.baseline_cores - atomic_read(&core_state.available_cores); + counts.u64 = cvmx_read_csr(CVMX_POW_WQ_INT_CNTX(pow_receive_group)); + backlog = counts.s.iq_cnt + counts.s.ds_cnt; + if (backlog > budget * cores_in_use && napi != NULL) + cvm_oct_enable_one_cpu(); } skb_in_hw = USE_SKBUFFS_IN_HW && work->word2.s.bufs == 1; if (likely(skb_in_hw)) { - skb = - *(struct sk_buff - **)(cvm_oct_get_buffer_ptr(work->packet_ptr) - - sizeof(void *)); + skb = *pskb; prefetch(&skb->head); prefetch(&skb->len); } prefetch(cvm_oct_device[work->ipprt]); - rx_count++; /* Immediately throw away all packets with receive errors */ if (unlikely(work->word2.snoip.rcv_error)) { if (cvm_oct_check_rcv_error(work)) @@ -292,39 +322,27 @@ void cvm_oct_tasklet_rx(unsigned long unused) * buffer. */ if (likely(skb_in_hw)) { - /* - * This calculation was changed in case the - * skb header is using a different address - * aliasing type than the buffer. It doesn't - * make any differnece now, but the new one is - * more correct. - */ - skb->data = - skb->head + work->packet_ptr.s.addr - - cvmx_ptr_to_phys(skb->head); + skb->data = skb->head + work->packet_ptr.s.addr - cvmx_ptr_to_phys(skb->head); prefetch(skb->data); skb->len = work->len; skb_set_tail_pointer(skb, skb->len); packet_not_copied = 1; } else { - /* * We have to copy the packet. First allocate * an skbuff for it. */ skb = dev_alloc_skb(work->len); if (!skb) { - DEBUGPRINT("Port %d failed to allocate " - "skbuff, packet dropped\n", - work->ipprt); + DEBUGPRINT("Port %d failed to allocate skbuff, packet dropped\n", + work->ipprt); cvm_oct_free_work(work); continue; } /* * Check if we've received a packet that was - * entirely stored in the work entry. This is - * untested. + * entirely stored in the work entry. */ if (unlikely(work->word2.s.bufs == 0)) { uint8_t *ptr = work->packet_data; @@ -343,15 +361,13 @@ void cvm_oct_tasklet_rx(unsigned long unused) /* No packet buffers to free */ } else { int segments = work->word2.s.bufs; - union cvmx_buf_ptr segment_ptr = - work->packet_ptr; + union cvmx_buf_ptr segment_ptr = work->packet_ptr; int len = work->len; while (segments--) { union cvmx_buf_ptr next_ptr = - *(union cvmx_buf_ptr *) - cvmx_phys_to_ptr(segment_ptr.s. - addr - 8); + *(union cvmx_buf_ptr *)cvmx_phys_to_ptr(segment_ptr.s.addr - 8); + /* * Octeon Errata PKI-100: The segment size is * wrong. Until it is fixed, calculate the @@ -361,22 +377,18 @@ void cvm_oct_tasklet_rx(unsigned long unused) * one: int segment_size = * segment_ptr.s.size; */ - int segment_size = - CVMX_FPA_PACKET_POOL_SIZE - - (segment_ptr.s.addr - - (((segment_ptr.s.addr >> 7) - - segment_ptr.s.back) << 7)); - /* Don't copy more than what is left - in the packet */ + int segment_size = CVMX_FPA_PACKET_POOL_SIZE - + (segment_ptr.s.addr - (((segment_ptr.s.addr >> 7) - segment_ptr.s.back) << 7)); + /* + * Don't copy more than what + * is left in the packet. + */ if (segment_size > len) segment_size = len; /* Copy the data into the packet */ memcpy(skb_put(skb, segment_size), - cvmx_phys_to_ptr(segment_ptr.s. - addr), + cvmx_phys_to_ptr(segment_ptr.s.addr), segment_size); - /* Reduce the amount of bytes left - to copy */ len -= segment_size; segment_ptr = next_ptr; } @@ -389,16 +401,15 @@ void cvm_oct_tasklet_rx(unsigned long unused) struct net_device *dev = cvm_oct_device[work->ipprt]; struct octeon_ethernet *priv = netdev_priv(dev); - /* Only accept packets for devices - that are currently up */ + /* + * Only accept packets for devices that are + * currently up. + */ if (likely(dev->flags & IFF_UP)) { skb->protocol = eth_type_trans(skb, dev); skb->dev = dev; - if (unlikely - (work->word2.s.not_IP - || work->word2.s.IP_exc - || work->word2.s.L4_error)) + if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc || work->word2.s.L4_error)) skb->ip_summed = CHECKSUM_NONE; else skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -414,15 +425,13 @@ void cvm_oct_tasklet_rx(unsigned long unused) #endif } netif_receive_skb(skb); + rx_count++; } else { + /* Drop any packet received for a device that isn't up */ /* - * Drop any packet received for a - * device that isn't up. - */ - /* - DEBUGPRINT("%s: Device not up, packet dropped\n", - dev->name); - */ + DEBUGPRINT("%s: Device not up, packet dropped\n", + dev->name); + */ #ifdef CONFIG_64BIT atomic64_add(1, (atomic64_t *)&priv->stats.rx_dropped); #else @@ -435,9 +444,8 @@ void cvm_oct_tasklet_rx(unsigned long unused) * Drop any packet received for a device that * doesn't exist. */ - DEBUGPRINT("Port %d not controlled by Linux, packet " - "dropped\n", - work->ipprt); + DEBUGPRINT("Port %d not controlled by Linux, packet dropped\n", + work->ipprt); dev_kfree_skb_irq(skb); } /* @@ -459,47 +467,93 @@ void cvm_oct_tasklet_rx(unsigned long unused) cvm_oct_free_work(work); } } - /* Restore the original POW group mask */ cvmx_write_csr(CVMX_POW_PP_GRP_MSKX(coreid), old_group_mask); if (USE_ASYNC_IOBDMA) { /* Restore the scratch area */ cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch); } + cvm_oct_rx_refill_pool(0); - if (USE_SKBUFFS_IN_HW) { - /* Refill the packet buffer pool */ - number_to_free = - cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); - - if (number_to_free > 0) { - cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, - -number_to_free); - num_freed = - cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, - CVMX_FPA_PACKET_POOL_SIZE, - number_to_free); - if (num_freed != number_to_free) { - cvmx_fau_atomic_add32 - (FAU_NUM_PACKET_BUFFERS_TO_FREE, - number_to_free - num_freed); - } - } + if (rx_count < budget && napi != NULL) { + /* No more work */ + napi_complete(napi); + cvm_oct_no_more_work(); } + return rx_count; } +#ifdef CONFIG_NET_POLL_CONTROLLER +/** + * cvm_oct_poll_controller - poll for receive packets + * device. + * + * @dev: Device to poll. Unused + */ +void cvm_oct_poll_controller(struct net_device *dev) +{ + cvm_oct_napi_poll(NULL, 16); +} +#endif + void cvm_oct_rx_initialize(void) { int i; - /* Initialize all of the tasklets */ - for (i = 0; i < NR_CPUS; i++) - tasklet_init(&cvm_oct_tasklet[i].t, cvm_oct_tasklet_rx, 0); + struct net_device *dev_for_napi = NULL; + union cvmx_pow_wq_int_thrx int_thr; + union cvmx_pow_wq_int_pc int_pc; + + for (i = 0; i < TOTAL_NUMBER_OF_PORTS; i++) { + if (cvm_oct_device[i]) { + dev_for_napi = cvm_oct_device[i]; + break; + } + } + + if (NULL == dev_for_napi) + panic("No net_devices were allocated."); + + if (max_rx_cpus > 1 && max_rx_cpus < num_online_cpus()) + atomic_set(&core_state.available_cores, max_rx_cpus); + else + atomic_set(&core_state.available_cores, num_online_cpus()); + core_state.baseline_cores = atomic_read(&core_state.available_cores); + + core_state.cpu_state = CPU_MASK_NONE; + for_each_possible_cpu(i) { + netif_napi_add(dev_for_napi, &cvm_oct_napi[i].napi, + cvm_oct_napi_poll, rx_napi_weight); + napi_enable(&cvm_oct_napi[i].napi); + } + /* Register an IRQ hander for to receive POW interrupts */ + i = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, + cvm_oct_do_interrupt, 0, "Ethernet", cvm_oct_device); + + if (i) + panic("Could not acquire Ethernet IRQ %d\n", + OCTEON_IRQ_WORKQ0 + pow_receive_group); + + disable_irq_nosync(OCTEON_IRQ_WORKQ0 + pow_receive_group); + + int_thr.u64 = 0; + int_thr.s.tc_en = 1; + int_thr.s.tc_thr = 1; + /* Enable POW interrupt when our port has at least one packet */ + cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), int_thr.u64); + + int_pc.u64 = 0; + int_pc.s.pc_thr = 5; + cvmx_write_csr(CVMX_POW_WQ_INT_PC, int_pc.u64); + + + /* Scheduld NAPI now. This will indirectly enable interrupts. */ + cvm_oct_enable_one_cpu(); } void cvm_oct_rx_shutdown(void) { int i; - /* Shutdown all of the tasklets */ - for (i = 0; i < NR_CPUS; i++) - tasklet_kill(&cvm_oct_tasklet[i].t); + /* Shutdown all of the NAPIs */ + for_each_possible_cpu(i) + netif_napi_del(&cvm_oct_napi[i].napi); } diff --git a/drivers/staging/octeon/ethernet-rx.h b/drivers/staging/octeon/ethernet-rx.h index a9b72b87a7a6..a0743b85d54e 100644 --- a/drivers/staging/octeon/ethernet-rx.h +++ b/drivers/staging/octeon/ethernet-rx.h @@ -24,10 +24,29 @@ * This file may also be available under a different license from Cavium. * Contact Cavium Networks for more information *********************************************************************/ +#include "cvmx-fau.h" -irqreturn_t cvm_oct_do_interrupt(int cpl, void *dev_id); void cvm_oct_poll_controller(struct net_device *dev); -void cvm_oct_tasklet_rx(unsigned long unused); - void cvm_oct_rx_initialize(void); void cvm_oct_rx_shutdown(void); + +static inline void cvm_oct_rx_refill_pool(int fill_threshold) +{ + int number_to_free; + int num_freed; + /* Refill the packet buffer pool */ + number_to_free = + cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); + + if (number_to_free > fill_threshold) { + cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, + -number_to_free); + num_freed = cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, + CVMX_FPA_PACKET_POOL_SIZE, + number_to_free); + if (num_freed != number_to_free) { + cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, + number_to_free - num_freed); + } + } +} diff --git a/drivers/staging/octeon/ethernet-sgmii.c b/drivers/staging/octeon/ethernet-sgmii.c index 6061d01eca2d..2d8589eb461e 100644 --- a/drivers/staging/octeon/ethernet-sgmii.c +++ b/drivers/staging/octeon/ethernet-sgmii.c @@ -26,7 +26,6 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> -#include <linux/mii.h> #include <net/dst.h> #include <asm/octeon/octeon.h> diff --git a/drivers/staging/octeon/ethernet-spi.c b/drivers/staging/octeon/ethernet-spi.c index 00dc0f4bad19..b58b8971f939 100644 --- a/drivers/staging/octeon/ethernet-spi.c +++ b/drivers/staging/octeon/ethernet-spi.c @@ -26,7 +26,6 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> -#include <linux/mii.h> #include <net/dst.h> #include <asm/octeon/octeon.h> diff --git a/drivers/staging/octeon/ethernet-tx.c b/drivers/staging/octeon/ethernet-tx.c index 535294105f65..afc2b734d554 100644 --- a/drivers/staging/octeon/ethernet-tx.c +++ b/drivers/staging/octeon/ethernet-tx.c @@ -4,7 +4,7 @@ * Contact: support@caviumnetworks.com * This file is part of the OCTEON SDK * - * Copyright (c) 2003-2007 Cavium Networks + * Copyright (c) 2003-2010 Cavium Networks * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as @@ -31,10 +31,6 @@ #include <linux/etherdevice.h> #include <linux/ip.h> #include <linux/string.h> -#include <linux/ethtool.h> -#include <linux/mii.h> -#include <linux/seq_file.h> -#include <linux/proc_fs.h> #include <net/dst.h> #ifdef CONFIG_XFRM #include <linux/xfrm.h> @@ -52,11 +48,14 @@ #include "cvmx-wqe.h" #include "cvmx-fau.h" +#include "cvmx-pip.h" #include "cvmx-pko.h" #include "cvmx-helper.h" #include "cvmx-gmxx-defs.h" +#define CVM_OCT_SKB_CB(skb) ((u64 *)((skb)->cb)) + /* * You can define GET_SKBUFF_QOS() to override how the skbuff output * function determines which output queue is used. The default @@ -68,12 +67,81 @@ #define GET_SKBUFF_QOS(skb) 0 #endif +static void cvm_oct_tx_do_cleanup(unsigned long arg); +static DECLARE_TASKLET(cvm_oct_tx_cleanup_tasklet, cvm_oct_tx_do_cleanup, 0); + +/* Maximum number of SKBs to try to free per xmit packet. */ +#define MAX_SKB_TO_FREE (MAX_OUT_QUEUE_DEPTH * 2) + +static inline int32_t cvm_oct_adjust_skb_to_free(int32_t skb_to_free, int fau) +{ + int32_t undo; + undo = skb_to_free > 0 ? MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE; + if (undo > 0) + cvmx_fau_atomic_add32(fau, -undo); + skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? MAX_SKB_TO_FREE : -skb_to_free; + return skb_to_free; +} + +static void cvm_oct_kick_tx_poll_watchdog(void) +{ + union cvmx_ciu_timx ciu_timx; + ciu_timx.u64 = 0; + ciu_timx.s.one_shot = 1; + ciu_timx.s.len = cvm_oct_tx_poll_interval; + cvmx_write_csr(CVMX_CIU_TIMX(1), ciu_timx.u64); +} + +void cvm_oct_free_tx_skbs(struct net_device *dev) +{ + int32_t skb_to_free; + int qos, queues_per_port; + int total_freed = 0; + int total_remaining = 0; + unsigned long flags; + struct octeon_ethernet *priv = netdev_priv(dev); + + queues_per_port = cvmx_pko_get_num_queues(priv->port); + /* Drain any pending packets in the free list */ + for (qos = 0; qos < queues_per_port; qos++) { + if (skb_queue_len(&priv->tx_free_list[qos]) == 0) + continue; + skb_to_free = cvmx_fau_fetch_and_add32(priv->fau+qos*4, MAX_SKB_TO_FREE); + skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4); + + + total_freed += skb_to_free; + if (skb_to_free > 0) { + struct sk_buff *to_free_list = NULL; + spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); + while (skb_to_free > 0) { + struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]); + t->next = to_free_list; + to_free_list = t; + skb_to_free--; + } + spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); + /* Do the actual freeing outside of the lock. */ + while (to_free_list) { + struct sk_buff *t = to_free_list; + to_free_list = to_free_list->next; + dev_kfree_skb_any(t); + } + } + total_remaining += skb_queue_len(&priv->tx_free_list[qos]); + } + if (total_freed >= 0 && netif_queue_stopped(dev)) + netif_wake_queue(dev); + if (total_remaining) + cvm_oct_kick_tx_poll_watchdog(); +} + /** - * Packet transmit - * + * cvm_oct_xmit - transmit a packet * @skb: Packet to send * @dev: Device info structure - * Returns Always returns zero + * + * Returns Always returns NETDEV_TX_OK */ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) { @@ -81,13 +149,15 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) union cvmx_buf_ptr hw_buffer; uint64_t old_scratch; uint64_t old_scratch2; - int dropped; int qos; - int queue_it_up; + int i; + enum {QUEUE_CORE, QUEUE_HW, QUEUE_DROP} queue_type; struct octeon_ethernet *priv = netdev_priv(dev); + struct sk_buff *to_free_list; int32_t skb_to_free; - int32_t undo; int32_t buffers_to_free; + u32 total_to_clean; + unsigned long flags; #if REUSE_SKBUFFS_WITHOUT_FREE unsigned char *fpa_head; #endif @@ -98,9 +168,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) */ prefetch(priv); - /* Start off assuming no drop */ - dropped = 0; - /* * The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to * completely remove "qos" in the event neither interface @@ -135,6 +202,28 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) } /* + * We have space for 6 segment pointers, If there will be more + * than that, we must linearize. + */ + if (unlikely(skb_shinfo(skb)->nr_frags > 5)) { + if (unlikely(__skb_linearize(skb))) { + queue_type = QUEUE_DROP; + if (USE_ASYNC_IOBDMA) { + /* Get the number of skbuffs in use by the hardware */ + CVMX_SYNCIOBDMA; + skb_to_free = cvmx_scratch_read64(CVMX_SCR_SCRATCH); + } else { + /* Get the number of skbuffs in use by the hardware */ + skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, + MAX_SKB_TO_FREE); + } + skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau + qos * 4); + spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); + goto skip_xmit; + } + } + + /* * The CN3XXX series of parts has an errata (GMX-401) which * causes the GMX block to hang if a collision occurs towards * the end of a <68 byte packet. As a workaround for this, we @@ -162,13 +251,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) } } - /* Build the PKO buffer pointer */ - hw_buffer.u64 = 0; - hw_buffer.s.addr = cvmx_ptr_to_phys(skb->data); - hw_buffer.s.pool = 0; - hw_buffer.s.size = - (unsigned long)skb_end_pointer(skb) - (unsigned long)skb->head; - /* Build the PKO command */ pko_command.u64 = 0; pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */ @@ -178,7 +260,31 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) pko_command.s.subone0 = 1; pko_command.s.dontfree = 1; - pko_command.s.reg0 = priv->fau + qos * 4; + + /* Build the PKO buffer pointer */ + hw_buffer.u64 = 0; + if (skb_shinfo(skb)->nr_frags == 0) { + hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data); + hw_buffer.s.pool = 0; + hw_buffer.s.size = skb->len; + } else { + hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)skb->data); + hw_buffer.s.pool = 0; + hw_buffer.s.size = skb_headlen(skb); + CVM_OCT_SKB_CB(skb)[0] = hw_buffer.u64; + for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { + struct skb_frag_struct *fs = skb_shinfo(skb)->frags + i; + hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)(page_address(fs->page) + fs->page_offset)); + hw_buffer.s.size = fs->size; + CVM_OCT_SKB_CB(skb)[i + 1] = hw_buffer.u64; + } + hw_buffer.s.addr = XKPHYS_TO_PHYS((u64)CVM_OCT_SKB_CB(skb)); + hw_buffer.s.size = skb_shinfo(skb)->nr_frags + 1; + pko_command.s.segs = skb_shinfo(skb)->nr_frags + 1; + pko_command.s.gather = 1; + goto dont_put_skbuff_in_hw; + } + /* * See if we can put this skb in the FPA pool. Any strange * behavior from the Linux networking stack will most likely @@ -190,7 +296,7 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) * shown a 25% increase in performance under some loads. */ #if REUSE_SKBUFFS_WITHOUT_FREE - fpa_head = skb->head + 128 - ((unsigned long)skb->head & 0x7f); + fpa_head = skb->head + 256 - ((unsigned long)skb->head & 0x7f); if (unlikely(skb->data < fpa_head)) { /* * printk("TX buffer beginning can't meet FPA @@ -248,10 +354,9 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) * We can use this buffer in the FPA. We don't need the FAU * update anymore */ - pko_command.s.reg0 = 0; pko_command.s.dontfree = 0; - hw_buffer.s.back = (skb->data - fpa_head) >> 7; + hw_buffer.s.back = ((unsigned long)skb->data >> 7) - ((unsigned long)fpa_head >> 7); *(struct sk_buff **)(fpa_head - sizeof(void *)) = skb; /* @@ -272,16 +377,16 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev) skb->tc_verd = 0; #endif /* CONFIG_NET_CLS_ACT */ #endif /* CONFIG_NET_SCHED */ +#endif /* REUSE_SKBUFFS_WITHOUT_FREE */ dont_put_skbuff_in_hw: -#endif /* REUSE_SKBUFFS_WITHOUT_FREE */ /* Check if we can use the hardware checksumming */ if (USE_HW_TCPUDP_CHECKSUM && (skb->protocol == htons(ETH_P_IP)) && (ip_hdr(skb)->version == 4) && (ip_hdr(skb)->ihl == 5) && ((ip_hdr(skb)->frag_off == 0) || (ip_hdr(skb)->frag_off == 1 << 14)) - && ((ip_hdr(skb)->protocol == IP_PROTOCOL_TCP) - || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP))) { + && ((ip_hdr(skb)->protocol == IPPROTO_TCP) + || (ip_hdr(skb)->protocol == IPPROTO_UDP))) { /* Use hardware checksum calc */ pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1; } @@ -299,89 +404,116 @@ dont_put_skbuff_in_hw: cvmx_fau_fetch_and_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); } - /* - * We try to claim MAX_SKB_TO_FREE buffers. If there were not - * that many available, we have to un-claim (undo) any that - * were in excess. If skb_to_free is positive we will free - * that many buffers. - */ - undo = skb_to_free > 0 ? - MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE; - if (undo > 0) - cvmx_fau_atomic_add32(priv->fau+qos*4, -undo); - skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? - MAX_SKB_TO_FREE : -skb_to_free; + skb_to_free = cvm_oct_adjust_skb_to_free(skb_to_free, priv->fau+qos*4); /* * If we're sending faster than the receive can free them then * don't do the HW free. */ - if ((buffers_to_free < -100) && !pko_command.s.dontfree) { + if ((buffers_to_free < -100) && !pko_command.s.dontfree) pko_command.s.dontfree = 1; - pko_command.s.reg0 = priv->fau + qos * 4; + + if (pko_command.s.dontfree) { + queue_type = QUEUE_CORE; + pko_command.s.reg0 = priv->fau+qos*4; + } else { + queue_type = QUEUE_HW; } + if (USE_ASYNC_IOBDMA) + cvmx_fau_async_fetch_and_add32(CVMX_SCR_SCRATCH, FAU_TOTAL_TX_TO_CLEAN, 1); - cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos, - CVMX_PKO_LOCK_CMD_QUEUE); + spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); /* Drop this packet if we have too many already queued to the HW */ - if (unlikely - (skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) { - /* - DEBUGPRINT("%s: Tx dropped. Too many queued\n", dev->name); - */ - dropped = 1; + if (unlikely(skb_queue_len(&priv->tx_free_list[qos]) >= MAX_OUT_QUEUE_DEPTH)) { + if (dev->tx_queue_len != 0) { + /* Drop the lock when notifying the core. */ + spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); + netif_stop_queue(dev); + spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); + } else { + /* If not using normal queueing. */ + queue_type = QUEUE_DROP; + goto skip_xmit; + } } + + cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos, + CVMX_PKO_LOCK_NONE); + /* Send the packet to the output queue */ - else if (unlikely - (cvmx_pko_send_packet_finish - (priv->port, priv->queue + qos, pko_command, hw_buffer, - CVMX_PKO_LOCK_CMD_QUEUE))) { + if (unlikely(cvmx_pko_send_packet_finish(priv->port, + priv->queue + qos, + pko_command, hw_buffer, + CVMX_PKO_LOCK_NONE))) { DEBUGPRINT("%s: Failed to send the packet\n", dev->name); - dropped = 1; + queue_type = QUEUE_DROP; + } +skip_xmit: + to_free_list = NULL; + + switch (queue_type) { + case QUEUE_DROP: + skb->next = to_free_list; + to_free_list = skb; + priv->stats.tx_dropped++; + break; + case QUEUE_HW: + cvmx_fau_atomic_add32(FAU_NUM_PACKET_BUFFERS_TO_FREE, -1); + break; + case QUEUE_CORE: + __skb_queue_tail(&priv->tx_free_list[qos], skb); + break; + default: + BUG(); + } + + while (skb_to_free > 0) { + struct sk_buff *t = __skb_dequeue(&priv->tx_free_list[qos]); + t->next = to_free_list; + to_free_list = t; + skb_to_free--; + } + + spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); + + /* Do the actual freeing outside of the lock. */ + while (to_free_list) { + struct sk_buff *t = to_free_list; + to_free_list = to_free_list->next; + dev_kfree_skb_any(t); } if (USE_ASYNC_IOBDMA) { + CVMX_SYNCIOBDMA; + total_to_clean = cvmx_scratch_read64(CVMX_SCR_SCRATCH); /* Restore the scratch area */ cvmx_scratch_write64(CVMX_SCR_SCRATCH, old_scratch); cvmx_scratch_write64(CVMX_SCR_SCRATCH + 8, old_scratch2); - } - - queue_it_up = 0; - if (unlikely(dropped)) { - dev_kfree_skb_any(skb); - priv->stats.tx_dropped++; } else { - if (USE_SKBUFFS_IN_HW) { - /* Put this packet on the queue to be freed later */ - if (pko_command.s.dontfree) - queue_it_up = 1; - else - cvmx_fau_atomic_add32 - (FAU_NUM_PACKET_BUFFERS_TO_FREE, -1); - } else { - /* Put this packet on the queue to be freed later */ - queue_it_up = 1; - } + total_to_clean = cvmx_fau_fetch_and_add32(FAU_TOTAL_TX_TO_CLEAN, 1); } - if (queue_it_up) { - spin_lock(&priv->tx_free_list[qos].lock); - __skb_queue_tail(&priv->tx_free_list[qos], skb); - cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 0); - spin_unlock(&priv->tx_free_list[qos].lock); - } else { - cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1); + if (total_to_clean & 0x3ff) { + /* + * Schedule the cleanup tasklet every 1024 packets for + * the pathological case of high traffic on one port + * delaying clean up of packets on a different port + * that is blocked waiting for the cleanup. + */ + tasklet_schedule(&cvm_oct_tx_cleanup_tasklet); } - return 0; + cvm_oct_kick_tx_poll_watchdog(); + + return NETDEV_TX_OK; } /** - * Packet transmit to the POW - * + * cvm_oct_xmit_pow - transmit a packet to the POW * @skb: Packet to send * @dev: Device info structure + * Returns Always returns zero */ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev) @@ -459,8 +591,8 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev) work->word2.s.dec_ipcomp = 0; /* FIXME */ #endif work->word2.s.tcp_or_udp = - (ip_hdr(skb)->protocol == IP_PROTOCOL_TCP) - || (ip_hdr(skb)->protocol == IP_PROTOCOL_UDP); + (ip_hdr(skb)->protocol == IPPROTO_TCP) + || (ip_hdr(skb)->protocol == IPPROTO_UDP); #if 0 /* FIXME */ work->word2.s.dec_ipsec = 0; @@ -529,116 +661,63 @@ int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev) } /** - * Transmit a work queue entry out of the ethernet port. Both - * the work queue entry and the packet data can optionally be - * freed. The work will be freed on error as well. - * - * @dev: Device to transmit out. - * @work_queue_entry: - * Work queue entry to send - * @do_free: True if the work queue entry and packet data should be - * freed. If false, neither will be freed. - * @qos: Index into the queues for this port to transmit on. This - * is used to implement QoS if their are multiple queues per - * port. This parameter must be between 0 and the number of - * queues per port minus 1. Values outside of this range will - * be change to zero. + * cvm_oct_tx_shutdown_dev - free all skb that are currently queued for TX. + * @dev: Device being shutdown * - * Returns Zero on success, negative on failure. */ -int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry, - int do_free, int qos) +void cvm_oct_tx_shutdown_dev(struct net_device *dev) { - unsigned long flags; - union cvmx_buf_ptr hw_buffer; - cvmx_pko_command_word0_t pko_command; - int dropped; struct octeon_ethernet *priv = netdev_priv(dev); - cvmx_wqe_t *work = work_queue_entry; + unsigned long flags; + int qos; - if (!(dev->flags & IFF_UP)) { - DEBUGPRINT("%s: Device not up\n", dev->name); - if (do_free) - cvm_oct_free_work(work); - return -1; + for (qos = 0; qos < 16; qos++) { + spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); + while (skb_queue_len(&priv->tx_free_list[qos])) + dev_kfree_skb_any(__skb_dequeue + (&priv->tx_free_list[qos])); + spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); } +} - /* The check on CVMX_PKO_QUEUES_PER_PORT_* is designed to completely - remove "qos" in the event neither interface supports - multiple queues per port */ - if ((CVMX_PKO_QUEUES_PER_PORT_INTERFACE0 > 1) || - (CVMX_PKO_QUEUES_PER_PORT_INTERFACE1 > 1)) { - if (qos <= 0) - qos = 0; - else if (qos >= cvmx_pko_get_num_queues(priv->port)) - qos = 0; - } else - qos = 0; - - /* Start off assuming no drop */ - dropped = 0; - - local_irq_save(flags); - cvmx_pko_send_packet_prepare(priv->port, priv->queue + qos, - CVMX_PKO_LOCK_CMD_QUEUE); - - /* Build the PKO buffer pointer */ - hw_buffer.u64 = 0; - hw_buffer.s.addr = work->packet_ptr.s.addr; - hw_buffer.s.pool = CVMX_FPA_PACKET_POOL; - hw_buffer.s.size = CVMX_FPA_PACKET_POOL_SIZE; - hw_buffer.s.back = work->packet_ptr.s.back; +static void cvm_oct_tx_do_cleanup(unsigned long arg) +{ + int port; - /* Build the PKO command */ - pko_command.u64 = 0; - pko_command.s.n2 = 1; /* Don't pollute L2 with the outgoing packet */ - pko_command.s.dontfree = !do_free; - pko_command.s.segs = work->word2.s.bufs; - pko_command.s.total_bytes = work->len; + for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) { + if (cvm_oct_device[port]) { + struct net_device *dev = cvm_oct_device[port]; + cvm_oct_free_tx_skbs(dev); + } + } +} - /* Check if we can use the hardware checksumming */ - if (unlikely(work->word2.s.not_IP || work->word2.s.IP_exc)) - pko_command.s.ipoffp1 = 0; - else - pko_command.s.ipoffp1 = sizeof(struct ethhdr) + 1; +static irqreturn_t cvm_oct_tx_cleanup_watchdog(int cpl, void *dev_id) +{ + /* Disable the interrupt. */ + cvmx_write_csr(CVMX_CIU_TIMX(1), 0); + /* Do the work in the tasklet. */ + tasklet_schedule(&cvm_oct_tx_cleanup_tasklet); + return IRQ_HANDLED; +} - /* Send the packet to the output queue */ - if (unlikely - (cvmx_pko_send_packet_finish - (priv->port, priv->queue + qos, pko_command, hw_buffer, - CVMX_PKO_LOCK_CMD_QUEUE))) { - DEBUGPRINT("%s: Failed to send the packet\n", dev->name); - dropped = -1; - } - local_irq_restore(flags); +void cvm_oct_tx_initialize(void) +{ + int i; - if (unlikely(dropped)) { - if (do_free) - cvm_oct_free_work(work); - priv->stats.tx_dropped++; - } else if (do_free) - cvmx_fpa_free(work, CVMX_FPA_WQE_POOL, DONT_WRITEBACK(1)); + /* Disable the interrupt. */ + cvmx_write_csr(CVMX_CIU_TIMX(1), 0); + /* Register an IRQ hander for to receive CIU_TIMX(1) interrupts */ + i = request_irq(OCTEON_IRQ_TIMER1, + cvm_oct_tx_cleanup_watchdog, 0, + "Ethernet", cvm_oct_device); - return dropped; + if (i) + panic("Could not acquire Ethernet IRQ %d\n", OCTEON_IRQ_TIMER1); } -EXPORT_SYMBOL(cvm_oct_transmit_qos); -/** - * This function frees all skb that are currently queued for TX. - * - * @dev: Device being shutdown - */ -void cvm_oct_tx_shutdown(struct net_device *dev) +void cvm_oct_tx_shutdown(void) { - struct octeon_ethernet *priv = netdev_priv(dev); - unsigned long flags; - int qos; - - for (qos = 0; qos < 16; qos++) { - spin_lock_irqsave(&priv->tx_free_list[qos].lock, flags); - while (skb_queue_len(&priv->tx_free_list[qos])) - dev_kfree_skb_any(__skb_dequeue - (&priv->tx_free_list[qos])); - spin_unlock_irqrestore(&priv->tx_free_list[qos].lock, flags); - } + /* Free the interrupt handler */ + free_irq(OCTEON_IRQ_TIMER1, cvm_oct_device); } diff --git a/drivers/staging/octeon/ethernet-tx.h b/drivers/staging/octeon/ethernet-tx.h index c0bebf750bc0..547680c6c371 100644 --- a/drivers/staging/octeon/ethernet-tx.h +++ b/drivers/staging/octeon/ethernet-tx.h @@ -29,29 +29,6 @@ int cvm_oct_xmit(struct sk_buff *skb, struct net_device *dev); int cvm_oct_xmit_pow(struct sk_buff *skb, struct net_device *dev); int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry, int do_free, int qos); -void cvm_oct_tx_shutdown(struct net_device *dev); - -/** - * Free dead transmit skbs. - * - * @priv: The driver data - * @skb_to_free: The number of SKBs to free (free none if negative). - * @qos: The queue to free from. - * @take_lock: If true, acquire the skb list lock. - */ -static inline void cvm_oct_free_tx_skbs(struct octeon_ethernet *priv, - int skb_to_free, - int qos, int take_lock) -{ - /* Free skbuffs not in use by the hardware. */ - if (skb_to_free > 0) { - if (take_lock) - spin_lock(&priv->tx_free_list[qos].lock); - while (skb_to_free > 0) { - dev_kfree_skb(__skb_dequeue(&priv->tx_free_list[qos])); - skb_to_free--; - } - if (take_lock) - spin_unlock(&priv->tx_free_list[qos].lock); - } -} +void cvm_oct_tx_initialize(void); +void cvm_oct_tx_shutdown(void); +void cvm_oct_tx_shutdown_dev(struct net_device *dev); diff --git a/drivers/staging/octeon/ethernet-util.h b/drivers/staging/octeon/ethernet-util.h index 37b665918000..23467563fe57 100644 --- a/drivers/staging/octeon/ethernet-util.h +++ b/drivers/staging/octeon/ethernet-util.h @@ -30,10 +30,9 @@ } while (0) /** - * Given a packet data address, return a pointer to the - * beginning of the packet buffer. - * + * cvm_oct_get_buffer_ptr - convert packet data address to pointer * @packet_ptr: Packet data hardware address + * * Returns Packet buffer pointer */ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr) @@ -43,9 +42,7 @@ static inline void *cvm_oct_get_buffer_ptr(union cvmx_buf_ptr packet_ptr) } /** - * Given an IPD/PKO port number, return the logical interface it is - * on. - * + * INTERFACE - convert IPD port to locgical interface * @ipd_port: Port to check * * Returns Logical interface @@ -65,9 +62,7 @@ static inline int INTERFACE(int ipd_port) } /** - * Given an IPD/PKO port number, return the port's index on a - * logical interface. - * + * INDEX - convert IPD/PKO port number to the port's interface index * @ipd_port: Port to check * * Returns Index into interface port list diff --git a/drivers/staging/octeon/ethernet-xaui.c b/drivers/staging/octeon/ethernet-xaui.c index ee3dc41b2c53..3fca1cc31ed8 100644 --- a/drivers/staging/octeon/ethernet-xaui.c +++ b/drivers/staging/octeon/ethernet-xaui.c @@ -26,7 +26,6 @@ **********************************************************************/ #include <linux/kernel.h> #include <linux/netdevice.h> -#include <linux/mii.h> #include <net/dst.h> #include <asm/octeon/octeon.h> diff --git a/drivers/staging/octeon/ethernet.c b/drivers/staging/octeon/ethernet.c index 4cfd4b136b32..02b63678811a 100644 --- a/drivers/staging/octeon/ethernet.c +++ b/drivers/staging/octeon/ethernet.c @@ -29,7 +29,6 @@ #include <linux/module.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> -#include <linux/delay.h> #include <linux/phy.h> #include <net/dst.h> @@ -43,8 +42,6 @@ #include "ethernet-tx.h" #include "ethernet-mdio.h" #include "ethernet-util.h" -#include "ethernet-proc.h" - #include "cvmx-pip.h" #include "cvmx-pko.h" @@ -104,13 +101,15 @@ MODULE_PARM_DESC(pow_send_list, "\n" "\t\"eth2,spi3,spi7\" would cause these three devices to transmit\n" "\tusing the pow_send_group."); -static int disable_core_queueing = 1; -module_param(disable_core_queueing, int, 0444); -MODULE_PARM_DESC(disable_core_queueing, "\n" - "\tWhen set the networking core's tx_queue_len is set to zero. This\n" - "\tallows packets to be sent without lock contention in the packet\n" - "\tscheduler resulting in some cases in improved throughput.\n"); +int max_rx_cpus = -1; +module_param(max_rx_cpus, int, 0444); +MODULE_PARM_DESC(max_rx_cpus, "\n" + "\t\tThe maximum number of CPUs to use for packet reception.\n" + "\t\tUse -1 to use all available CPUs."); +int rx_napi_weight = 32; +module_param(rx_napi_weight, int, 0444); +MODULE_PARM_DESC(rx_napi_weight, "The NAPI WEIGHT parameter."); /* * The offset from mac_addr_base that should be used for the next port @@ -122,9 +121,16 @@ MODULE_PARM_DESC(disable_core_queueing, "\n" static unsigned int cvm_oct_mac_addr_offset; /** - * Periodic timer to check auto negotiation + * cvm_oct_poll_queue - Workqueue for polling operations. + */ +struct workqueue_struct *cvm_oct_poll_queue; + +/** + * cvm_oct_poll_queue_stopping - flag to indicate polling should stop. + * + * Set to one right before cvm_oct_poll_queue is destroyed. */ -static struct timer_list cvm_oct_poll_timer; +atomic_t cvm_oct_poll_queue_stopping = ATOMIC_INIT(0); /** * Array of every ethernet device owned by this driver indexed by @@ -132,65 +138,44 @@ static struct timer_list cvm_oct_poll_timer; */ struct net_device *cvm_oct_device[TOTAL_NUMBER_OF_PORTS]; -/** - * Periodic timer tick for slow management operations - * - * @arg: Device to check - */ -static void cvm_do_timer(unsigned long arg) +u64 cvm_oct_tx_poll_interval; + +static void cvm_oct_rx_refill_worker(struct work_struct *work); +static DECLARE_DELAYED_WORK(cvm_oct_rx_refill_work, cvm_oct_rx_refill_worker); + +static void cvm_oct_rx_refill_worker(struct work_struct *work) { - int32_t skb_to_free, undo; - int queues_per_port; - int qos; - struct octeon_ethernet *priv; - static int port; + /* + * FPA 0 may have been drained, try to refill it if we need + * more than num_packet_buffers / 2, otherwise normal receive + * processing will refill it. If it were drained, no packets + * could be received so cvm_oct_napi_poll would never be + * invoked to do the refill. + */ + cvm_oct_rx_refill_pool(num_packet_buffers / 2); - if (port >= CVMX_PIP_NUM_INPUT_PORTS) { - /* - * All ports have been polled. Start the next - * iteration through the ports in one second. - */ - port = 0; - mod_timer(&cvm_oct_poll_timer, jiffies + HZ); - return; - } - if (!cvm_oct_device[port]) - goto out; + if (!atomic_read(&cvm_oct_poll_queue_stopping)) + queue_delayed_work(cvm_oct_poll_queue, + &cvm_oct_rx_refill_work, HZ); +} + +static void cvm_oct_periodic_worker(struct work_struct *work) +{ + struct octeon_ethernet *priv = container_of(work, + struct octeon_ethernet, + port_periodic_work.work); - priv = netdev_priv(cvm_oct_device[port]); if (priv->poll) - priv->poll(cvm_oct_device[port]); - - queues_per_port = cvmx_pko_get_num_queues(port); - /* Drain any pending packets in the free list */ - for (qos = 0; qos < queues_per_port; qos++) { - if (skb_queue_len(&priv->tx_free_list[qos]) == 0) - continue; - skb_to_free = cvmx_fau_fetch_and_add32(priv->fau + qos * 4, - MAX_SKB_TO_FREE); - undo = skb_to_free > 0 ? - MAX_SKB_TO_FREE : skb_to_free + MAX_SKB_TO_FREE; - if (undo > 0) - cvmx_fau_atomic_add32(priv->fau+qos*4, -undo); - skb_to_free = -skb_to_free > MAX_SKB_TO_FREE ? - MAX_SKB_TO_FREE : -skb_to_free; - cvm_oct_free_tx_skbs(priv, skb_to_free, qos, 1); - } - cvm_oct_device[port]->netdev_ops->ndo_get_stats(cvm_oct_device[port]); + priv->poll(cvm_oct_device[priv->port]); -out: - port++; - /* Poll the next port in a 50th of a second. - This spreads the polling of ports out a little bit */ - mod_timer(&cvm_oct_poll_timer, jiffies + HZ / 50); -} + cvm_oct_device[priv->port]->netdev_ops->ndo_get_stats(cvm_oct_device[priv->port]); + + if (!atomic_read(&cvm_oct_poll_queue_stopping)) + queue_delayed_work(cvm_oct_poll_queue, &priv->port_periodic_work, HZ); + } -/** - * Configure common hardware for all interfaces - */ static __init void cvm_oct_configure_common_hw(void) { - int r; /* Setup the FPA */ cvmx_fpa_enable(); cvm_oct_mem_fill_fpa(CVMX_FPA_PACKET_POOL, CVMX_FPA_PACKET_POOL_SIZE, @@ -205,28 +190,13 @@ static __init void cvm_oct_configure_common_hw(void) cvmx_helper_setup_red(num_packet_buffers / 4, num_packet_buffers / 8); - /* Enable the MII interface */ - if (!octeon_is_simulation()) - cvmx_write_csr(CVMX_SMIX_EN(0), 1); - - /* Register an IRQ hander for to receive POW interrupts */ - r = request_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, - cvm_oct_do_interrupt, IRQF_SHARED, "Ethernet", - cvm_oct_device); - -#if defined(CONFIG_SMP) && 0 - if (USE_MULTICORE_RECEIVE) { - irq_set_affinity(OCTEON_IRQ_WORKQ0 + pow_receive_group, - cpu_online_mask); - } -#endif } /** - * Free a work queue entry received in a intercept callback. + * cvm_oct_free_work- Free a work queue entry + * + * @work_queue_entry: Work queue entry to free * - * @work_queue_entry: - * Work queue entry to free * Returns Zero on success, Negative on failure. */ int cvm_oct_free_work(void *work_queue_entry) @@ -253,9 +223,9 @@ int cvm_oct_free_work(void *work_queue_entry) EXPORT_SYMBOL(cvm_oct_free_work); /** - * Get the low level ethernet statistics - * + * cvm_oct_common_get_stats - get the low level ethernet statistics * @dev: Device to get the statistics from + * * Returns Pointer to the statistics */ static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev) @@ -299,8 +269,7 @@ static struct net_device_stats *cvm_oct_common_get_stats(struct net_device *dev) } /** - * Change the link MTU. Unimplemented - * + * cvm_oct_common_change_mtu - change the link MTU * @dev: Device to change * @new_mtu: The new MTU * @@ -364,8 +333,7 @@ static int cvm_oct_common_change_mtu(struct net_device *dev, int new_mtu) } /** - * Set the multicast list. Currently unimplemented. - * + * cvm_oct_common_set_multicast_list - set the multicast list * @dev: Device to work on */ static void cvm_oct_common_set_multicast_list(struct net_device *dev) @@ -420,10 +388,10 @@ static void cvm_oct_common_set_multicast_list(struct net_device *dev) } /** - * Set the hardware MAC address for a device - * - * @dev: Device to change the MAC address for - * @addr: Address structure to change it too. MAC address is addr + 2. + * cvm_oct_common_set_mac_address - set the hardware MAC address for a device + * @dev: The device in question. + * @addr: Address structure to change it too. + * Returns Zero on success */ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr) @@ -470,9 +438,9 @@ static int cvm_oct_common_set_mac_address(struct net_device *dev, void *addr) } /** - * Per network device initialization - * + * cvm_oct_common_init - per network device initialization * @dev: Device to initialize + * * Returns Zero on success */ int cvm_oct_common_init(struct net_device *dev) @@ -510,8 +478,11 @@ int cvm_oct_common_init(struct net_device *dev) && (always_use_pow || strstr(pow_send_list, dev->name))) priv->queue = -1; - if (priv->queue != -1 && USE_HW_TCPUDP_CHECKSUM) - dev->features |= NETIF_F_IP_CSUM; + if (priv->queue != -1) { + dev->features |= NETIF_F_SG; + if (USE_HW_TCPUDP_CHECKSUM) + dev->features |= NETIF_F_IP_CSUM; + } /* We do our own locking, Linux doesn't need to */ dev->features |= NETIF_F_LLTX; @@ -625,12 +596,6 @@ static const struct net_device_ops cvm_oct_pow_netdev_ops = { extern void octeon_mdiobus_force_mod_depencency(void); -/** - * Module/ driver initialization. Creates the linux network - * devices. - * - * Returns Zero on success - */ static int __init cvm_oct_init_module(void) { int num_interfaces; @@ -648,8 +613,12 @@ static int __init cvm_oct_init_module(void) else cvm_oct_mac_addr_offset = 0; - cvm_oct_proc_initialize(); - cvm_oct_rx_initialize(); + cvm_oct_poll_queue = create_singlethread_workqueue("octeon-ethernet"); + if (cvm_oct_poll_queue == NULL) { + pr_err("octeon-ethernet: Cannot create workqueue"); + return -ENOMEM; + } + cvm_oct_configure_common_hw(); cvmx_helper_initialize_packet_io_global(); @@ -682,6 +651,9 @@ static int __init cvm_oct_init_module(void) */ cvmx_fau_atomic_write32(FAU_NUM_PACKET_BUFFERS_TO_FREE, 0); + /* Initialize the FAU used for counting tx SKBs that need to be freed */ + cvmx_fau_atomic_write32(FAU_TOTAL_TX_TO_CLEAN, 0); + if ((pow_send_group != -1)) { struct net_device *dev; pr_info("\tConfiguring device for POW only access\n"); @@ -689,7 +661,6 @@ static int __init cvm_oct_init_module(void) if (dev) { /* Initialize the device private structure. */ struct octeon_ethernet *priv = netdev_priv(dev); - memset(priv, 0, sizeof(struct octeon_ethernet)); dev->netdev_ops = &cvm_oct_pow_netdev_ops; priv->imode = CVMX_HELPER_INTERFACE_MODE_DISABLED; @@ -700,19 +671,16 @@ static int __init cvm_oct_init_module(void) skb_queue_head_init(&priv->tx_free_list[qos]); if (register_netdev(dev) < 0) { - pr_err("Failed to register ethernet " - "device for POW\n"); + pr_err("Failed to register ethernet device for POW\n"); kfree(dev); } else { cvm_oct_device[CVMX_PIP_NUM_INPUT_PORTS] = dev; - pr_info("%s: POW send group %d, receive " - "group %d\n", - dev->name, pow_send_group, - pow_receive_group); + pr_info("%s: POW send group %d, receive group %d\n", + dev->name, pow_send_group, + pow_receive_group); } } else { - pr_err("Failed to allocate ethernet device " - "for POW\n"); + pr_err("Failed to allocate ethernet device for POW\n"); } } @@ -730,17 +698,15 @@ static int __init cvm_oct_init_module(void) struct net_device *dev = alloc_etherdev(sizeof(struct octeon_ethernet)); if (!dev) { - pr_err("Failed to allocate ethernet device " - "for port %d\n", port); + pr_err("Failed to allocate ethernet device for port %d\n", port); continue; } - if (disable_core_queueing) - dev->tx_queue_len = 0; /* Initialize the device private structure. */ priv = netdev_priv(dev); - memset(priv, 0, sizeof(struct octeon_ethernet)); + INIT_DELAYED_WORK(&priv->port_periodic_work, + cvm_oct_periodic_worker); priv->imode = imode; priv->port = port; priv->queue = cvmx_pko_get_base_queue(priv->port); @@ -803,44 +769,25 @@ static int __init cvm_oct_init_module(void) fau -= cvmx_pko_get_num_queues(priv->port) * sizeof(uint32_t); + queue_delayed_work(cvm_oct_poll_queue, + &priv->port_periodic_work, HZ); } } } - if (INTERRUPT_LIMIT) { - /* - * Set the POW timer rate to give an interrupt at most - * INTERRUPT_LIMIT times per second. - */ - cvmx_write_csr(CVMX_POW_WQ_INT_PC, - octeon_bootinfo->eclock_hz / (INTERRUPT_LIMIT * - 16 * 256) << 8); + cvm_oct_tx_initialize(); + cvm_oct_rx_initialize(); - /* - * Enable POW timer interrupt. It will count when - * there are packets available. - */ - cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), - 0x1ful << 24); - } else { - /* Enable POW interrupt when our port has at least one packet */ - cvmx_write_csr(CVMX_POW_WQ_INT_THRX(pow_receive_group), 0x1001); - } + /* + * 150 uS: about 10 1500-byte packtes at 1GE. + */ + cvm_oct_tx_poll_interval = 150 * (octeon_get_clock_rate() / 1000000); - /* Enable the poll timer for checking RGMII status */ - init_timer(&cvm_oct_poll_timer); - cvm_oct_poll_timer.data = 0; - cvm_oct_poll_timer.function = cvm_do_timer; - mod_timer(&cvm_oct_poll_timer, jiffies + HZ); + queue_delayed_work(cvm_oct_poll_queue, &cvm_oct_rx_refill_work, HZ); return 0; } -/** - * Module / driver shutdown - * - * Returns Zero on success - */ static void __exit cvm_oct_cleanup_module(void) { int port; @@ -853,22 +800,31 @@ static void __exit cvm_oct_cleanup_module(void) /* Free the interrupt handler */ free_irq(OCTEON_IRQ_WORKQ0 + pow_receive_group, cvm_oct_device); - del_timer(&cvm_oct_poll_timer); + atomic_inc_return(&cvm_oct_poll_queue_stopping); + cancel_delayed_work_sync(&cvm_oct_rx_refill_work); + cvm_oct_rx_shutdown(); + cvm_oct_tx_shutdown(); + cvmx_pko_disable(); /* Free the ethernet devices */ for (port = 0; port < TOTAL_NUMBER_OF_PORTS; port++) { if (cvm_oct_device[port]) { - cvm_oct_tx_shutdown(cvm_oct_device[port]); - unregister_netdev(cvm_oct_device[port]); - kfree(cvm_oct_device[port]); + struct net_device *dev = cvm_oct_device[port]; + struct octeon_ethernet *priv = netdev_priv(dev); + cancel_delayed_work_sync(&priv->port_periodic_work); + + cvm_oct_tx_shutdown_dev(dev); + unregister_netdev(dev); + kfree(dev); cvm_oct_device[port] = NULL; } } + destroy_workqueue(cvm_oct_poll_queue); + cvmx_pko_shutdown(); - cvm_oct_proc_shutdown(); cvmx_ipd_free_ptr(); diff --git a/drivers/staging/octeon/octeon-ethernet.h b/drivers/staging/octeon/octeon-ethernet.h index 402a15b9bb0e..d58192563552 100644 --- a/drivers/staging/octeon/octeon-ethernet.h +++ b/drivers/staging/octeon/octeon-ethernet.h @@ -4,7 +4,7 @@ * Contact: support@caviumnetworks.com * This file is part of the OCTEON SDK * - * Copyright (c) 2003-2007 Cavium Networks + * Copyright (c) 2003-2010 Cavium Networks * * This file is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License, Version 2, as @@ -57,58 +57,12 @@ struct octeon_ethernet { uint64_t link_info; /* Called periodically to check link status */ void (*poll) (struct net_device *dev); + struct delayed_work port_periodic_work; + struct work_struct port_work; /* may be unused. */ }; -/** - * Free a work queue entry received in a intercept callback. - * - * @work_queue_entry: - * Work queue entry to free - * Returns Zero on success, Negative on failure. - */ int cvm_oct_free_work(void *work_queue_entry); -/** - * Transmit a work queue entry out of the ethernet port. Both - * the work queue entry and the packet data can optionally be - * freed. The work will be freed on error as well. - * - * @dev: Device to transmit out. - * @work_queue_entry: - * Work queue entry to send - * @do_free: True if the work queue entry and packet data should be - * freed. If false, neither will be freed. - * @qos: Index into the queues for this port to transmit on. This - * is used to implement QoS if their are multiple queues per - * port. This parameter must be between 0 and the number of - * queues per port minus 1. Values outside of this range will - * be change to zero. - * - * Returns Zero on success, negative on failure. - */ -int cvm_oct_transmit_qos(struct net_device *dev, void *work_queue_entry, - int do_free, int qos); - -/** - * Transmit a work queue entry out of the ethernet port. Both - * the work queue entry and the packet data can optionally be - * freed. The work will be freed on error as well. This simply - * wraps cvmx_oct_transmit_qos() for backwards compatability. - * - * @dev: Device to transmit out. - * @work_queue_entry: - * Work queue entry to send - * @do_free: True if the work queue entry and packet data should be - * freed. If false, neither will be freed. - * - * Returns Zero on success, negative on failure. - */ -static inline int cvm_oct_transmit(struct net_device *dev, - void *work_queue_entry, int do_free) -{ - return cvm_oct_transmit_qos(dev, work_queue_entry, do_free, 0); -} - extern int cvm_oct_rgmii_init(struct net_device *dev); extern void cvm_oct_rgmii_uninit(struct net_device *dev); extern int cvm_oct_rgmii_open(struct net_device *dev); @@ -134,5 +88,11 @@ extern int pow_send_group; extern int pow_receive_group; extern char pow_send_list[]; extern struct net_device *cvm_oct_device[]; +extern struct workqueue_struct *cvm_oct_poll_queue; +extern atomic_t cvm_oct_poll_queue_stopping; +extern u64 cvm_oct_tx_poll_interval; + +extern int max_rx_cpus; +extern int rx_napi_weight; #endif diff --git a/drivers/staging/sm7xx/smtc2d.c b/drivers/staging/sm7xx/smtc2d.c index 133b86c6a678..2fff0a0052d1 100644 --- a/drivers/staging/sm7xx/smtc2d.c +++ b/drivers/staging/sm7xx/smtc2d.c @@ -5,7 +5,7 @@ * Author: Boyod boyod.yang@siliconmotion.com.cn * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for diff --git a/drivers/staging/sm7xx/smtc2d.h b/drivers/staging/sm7xx/smtc2d.h index 38d0c335322b..02b4fa29136c 100644 --- a/drivers/staging/sm7xx/smtc2d.h +++ b/drivers/staging/sm7xx/smtc2d.h @@ -5,7 +5,7 @@ * Author: Ge Wang, gewang@siliconmotion.com * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for diff --git a/drivers/staging/sm7xx/smtcfb.c b/drivers/staging/sm7xx/smtcfb.c index 161dbc9c1397..a4f6f49aef48 100644 --- a/drivers/staging/sm7xx/smtcfb.c +++ b/drivers/staging/sm7xx/smtcfb.c @@ -6,7 +6,7 @@ * Boyod boyod.yang@siliconmotion.com.cn * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for diff --git a/drivers/staging/sm7xx/smtcfb.h b/drivers/staging/sm7xx/smtcfb.h index 7f2c34138215..7ee565c2c952 100644 --- a/drivers/staging/sm7xx/smtcfb.h +++ b/drivers/staging/sm7xx/smtcfb.h @@ -6,7 +6,7 @@ * Boyod boyod.yang@siliconmotion.com.cn * * Copyright (C) 2009 Lemote, Inc. - * Author: Wu Zhangjin, wuzj@lemote.com + * Author: Wu Zhangjin, wuzhangjin@gmail.com * * This file is subject to the terms and conditions of the GNU General Public * License. See the file COPYING in the main directory of this archive for diff --git a/drivers/watchdog/ar7_wdt.c b/drivers/watchdog/ar7_wdt.c index 2e94b71b20d9..2bb95cd308c1 100644 --- a/drivers/watchdog/ar7_wdt.c +++ b/drivers/watchdog/ar7_wdt.c @@ -34,6 +34,7 @@ #include <linux/ioport.h> #include <linux/io.h> #include <linux/uaccess.h> +#include <linux/clk.h> #include <asm/addrspace.h> #include <asm/mach-ar7/ar7.h> @@ -80,6 +81,8 @@ static struct resource *ar7_regs_wdt; /* Pointer to the remapped WDT IO space */ static struct ar7_wdt *ar7_wdt; +static struct clk *vbus_clk; + static void ar7_wdt_kick(u32 value) { WRITE_REG(ar7_wdt->kick_lock, 0x5555); @@ -138,17 +141,19 @@ static void ar7_wdt_disable(u32 value) static void ar7_wdt_update_margin(int new_margin) { u32 change; + u32 vbus_rate; - change = new_margin * (ar7_vbus_freq() / prescale_value); + vbus_rate = clk_get_rate(vbus_clk); + change = new_margin * (vbus_rate / prescale_value); if (change < 1) change = 1; if (change > 0xffff) change = 0xffff; ar7_wdt_change(change); - margin = change * prescale_value / ar7_vbus_freq(); + margin = change * prescale_value / vbus_rate; printk(KERN_INFO DRVNAME ": timer margin %d seconds (prescale %d, change %d, freq %d)\n", - margin, prescale_value, change, ar7_vbus_freq()); + margin, prescale_value, change, vbus_rate); } static void ar7_wdt_enable_wdt(void) @@ -298,6 +303,13 @@ static int __devinit ar7_wdt_probe(struct platform_device *pdev) goto out_mem_region; } + vbus_clk = clk_get(NULL, "vbus"); + if (IS_ERR(vbus_clk)) { + printk(KERN_ERR DRVNAME ": could not get vbus clock\n"); + rc = PTR_ERR(vbus_clk); + goto out_mem_region; + } + ar7_wdt_disable_wdt(); ar7_wdt_prescale(prescale_value); ar7_wdt_update_margin(margin); |