diff options
| author |   Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-11 19:39:09 -0800 |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2016-01-11 19:39:09 -0800 |
| commit | fb591fbd0aee437faada42b0473835bcbaf0eb38 (patch) | |
| tree | fe5846bac472e42162caf24a43ab4eacf38f3bae /drivers | |
| parent | Merge branch 'for-4.5' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata (diff) | |
| parent | mmc: dw_mmc: remove the unused quirks (diff) | |
| download | linux-dev-fb591fbd0aee437faada42b0473835bcbaf0eb38.tar.xz linux-dev-fb591fbd0aee437faada42b0473835bcbaf0eb38.zip | |
Merge tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc
Pull MMC updates from Ulf Hansson:
"MMC core:
- Optimize boot time by detecting cards simultaneously
- Make runtime resume default behavior for MMC/SD
- Enable MMC/SD/SDIO devices to suspend/resume asynchronously
- Allow more than 8 partitions per card
- Introduce MMC_CAP2_NO_SDIO to prevent unsupported SDIO commands
- Support the standard DT wakeup-source property
- Fix driver strength switching for HS200 and HS400
- Fix switch command timeout
- Fix invalid vdd in voltage switch power cycle for SDIO
MMC host:
- sdhci: Restore behavior when setting VDD via external regulator
- sdhci: A couple of changes/fixes related to the dma support
- sdhci-tegra: Add Tegra210 support
- sdhci-tegra: Support for UHS-I cards including tuning support
- sdhci-of-at91: Add PM support
- sh_mmcif: Rework dma channel handling
- mvsdio: Delete platform data code path"
* tag 'mmc-v4.5' of git://git.linaro.org/people/ulf.hansson/mmc: (52 commits)
mmc: dw_mmc: remove the unused quirks
mmc: sdhci-pci: use to_pci_dev()
mmc: cb710: use to_platform_device()
mmc: tegra: use correct accessor for misc ctrl register
mmc: tegra: enable UHS-I modes
mmc: tegra: implement UHS tuning
mmc: tegra: disable SPI_MODE_CLKEN
mmc: tegra: implement module external clock change
mmc: sdhci: restore behavior when setting VDD via external regulator
mmc: It is not an error for the card to be removed while suspended
mmc: block: Allow more than 8 partitions per card
mmc: core: Optimize boot time by detecting cards simultaneously
mmc: dw_mmc: use resource_size_t to store physical address
mmc: core: fix __mmc_switch timeout caused by preempt
mmc: usdhi6rol0: handle NULL data in timeout
mmc: of_mmc_spi: Add IRQF_ONESHOT to interrupt flags
mmc: mediatek: change some dev_err to dev_dbg
mmc: enable MMC/SD/SDIO device to suspend/resume asynchronously
mmc: sdhci: Fix sdhci_runtime_pm_bus_on/off()
mmc: sdhci: 64-bit DMA actually has 4-byte alignment
...
Diffstat (limited to 'drivers')
34 files changed, 618 insertions, 516 deletions
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index d8486168415a..5914263090fc 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -171,11 +171,7 @@ static struct mmc_blk_data *mmc_blk_get(struct gendisk *disk) static inline int mmc_get_devidx(struct gendisk *disk) { - int devmaj = MAJOR(disk_devt(disk)); - int devidx = MINOR(disk_devt(disk)) / perdev_minors; - - if (!devmaj) - devidx = disk->first_minor / perdev_minors; + int devidx = disk->first_minor / perdev_minors; return devidx; } @@ -344,7 +340,7 @@ static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( struct mmc_blk_ioc_data *idata; int err; - idata = kzalloc(sizeof(*idata), GFP_KERNEL); + idata = kmalloc(sizeof(*idata), GFP_KERNEL); if (!idata) { err = -ENOMEM; goto out; @@ -364,7 +360,7 @@ static struct mmc_blk_ioc_data *mmc_blk_ioctl_copy_from_user( if (!idata->buf_bytes) return idata; - idata->buf = kzalloc(idata->buf_bytes, GFP_KERNEL); + idata->buf = kmalloc(idata->buf_bytes, GFP_KERNEL); if (!idata->buf) { err = -ENOMEM; goto idata_err; @@ -2244,6 +2240,7 @@ static struct mmc_blk_data *mmc_blk_alloc_req(struct mmc_card *card, md->disk->queue = md->queue.queue; md->disk->driverfs_dev = parent; set_disk_ro(md->disk, md->read_only || default_ro); + md->disk->flags = GENHD_FL_EXT_DEVT; if (area_type & (MMC_BLK_DATA_AREA_RPMB | MMC_BLK_DATA_AREA_BOOT)) md->disk->flags |= GENHD_FL_NO_PART_SCAN; diff --git a/drivers/mmc/core/bus.c b/drivers/mmc/core/bus.c index 972ff844cf5a..4bc48f10452f 100644 --- a/drivers/mmc/core/bus.c +++ b/drivers/mmc/core/bus.c @@ -349,6 +349,8 @@ int mmc_add_card(struct mmc_card *card) card->dev.of_node = mmc_of_find_child_device(card->host, 0); + device_enable_async_suspend(&card->dev); + ret = device_add(&card->dev); if (ret) return ret; diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index 5ae89e48fd85..f95d41ffc766 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -55,7 +55,6 @@ */ #define MMC_BKOPS_MAX_TIMEOUT (4 * 60 * 1000) /* max time to wait in ms */ -static struct workqueue_struct *workqueue; static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; /* @@ -66,21 +65,16 @@ static const unsigned freqs[] = { 400000, 300000, 200000, 100000 }; bool use_spi_crc = 1; module_param(use_spi_crc, bool, 0); -/* - * Internal function. Schedule delayed work in the MMC work queue. - */ static int mmc_schedule_delayed_work(struct delayed_work *work, unsigned long delay) { - return queue_delayed_work(workqueue, work, delay); -} - -/* - * Internal function. Flush all scheduled work from the MMC work queue. - */ -static void mmc_flush_scheduled_work(void) -{ - flush_workqueue(workqueue); + /* + * We use the system_freezable_wq, because of two reasons. + * First, it allows several works (not the same work item) to be + * executed simultaneously. Second, the queue becomes frozen when + * userspace becomes frozen during system PM. + */ + return queue_delayed_work(system_freezable_wq, work, delay); } #ifdef CONFIG_FAIL_MMC_REQUEST @@ -1485,7 +1479,7 @@ int mmc_regulator_get_supply(struct mmc_host *mmc) if (IS_ERR(mmc->supply.vmmc)) { if (PTR_ERR(mmc->supply.vmmc) == -EPROBE_DEFER) return -EPROBE_DEFER; - dev_info(dev, "No vmmc regulator found\n"); + dev_dbg(dev, "No vmmc regulator found\n"); } else { ret = mmc_regulator_get_ocrmask(mmc->supply.vmmc); if (ret > 0) @@ -1497,7 +1491,7 @@ int mmc_regulator_get_supply(struct mmc_host *mmc) if (IS_ERR(mmc->supply.vqmmc)) { if (PTR_ERR(mmc->supply.vqmmc) == -EPROBE_DEFER) return -EPROBE_DEFER; - dev_info(dev, "No vqmmc regulator found\n"); + dev_dbg(dev, "No vqmmc regulator found\n"); } return 0; @@ -2476,15 +2470,20 @@ static int mmc_rescan_try_freq(struct mmc_host *host, unsigned freq) * sdio_reset sends CMD52 to reset card. Since we do not know * if the card is being re-initialized, just send it. CMD52 * should be ignored by SD/eMMC cards. + * Skip it if we already know that we do not support SDIO commands */ - sdio_reset(host); + if (!(host->caps2 & MMC_CAP2_NO_SDIO)) + sdio_reset(host); + mmc_go_idle(host); mmc_send_if_cond(host, host->ocr_avail); /* Order's important: probe SDIO, then SD, then MMC */ - if (!mmc_attach_sdio(host)) - return 0; + if (!(host->caps2 & MMC_CAP2_NO_SDIO)) + if (!mmc_attach_sdio(host)) + return 0; + if (!mmc_attach_sd(host)) return 0; if (!mmc_attach_mmc(host)) @@ -2498,9 +2497,6 @@ int _mmc_detect_card_removed(struct mmc_host *host) { int ret; - if (host->caps & MMC_CAP_NONREMOVABLE) - return 0; - if (!host->card || mmc_card_removed(host->card)) return 1; @@ -2536,6 +2532,9 @@ int mmc_detect_card_removed(struct mmc_host *host) if (!card) return 1; + if (host->caps & MMC_CAP_NONREMOVABLE) + return 0; + ret = mmc_card_removed(card); /* * The card will be considered unchanged unless we have been asked to @@ -2567,11 +2566,6 @@ void mmc_rescan(struct work_struct *work) container_of(work, struct mmc_host, detect.work); int i; - if (host->trigger_card_event && host->ops->card_event) { - host->ops->card_event(host); - host->trigger_card_event = false; - } - if (host->rescan_disable) return; @@ -2580,6 +2574,13 @@ void mmc_rescan(struct work_struct *work) return; host->rescan_entered = 1; + if (host->trigger_card_event && host->ops->card_event) { + mmc_claim_host(host); + host->ops->card_event(host); + mmc_release_host(host); + host->trigger_card_event = false; + } + mmc_bus_get(host); /* @@ -2611,15 +2612,14 @@ void mmc_rescan(struct work_struct *work) */ mmc_bus_put(host); + mmc_claim_host(host); if (!(host->caps & MMC_CAP_NONREMOVABLE) && host->ops->get_cd && host->ops->get_cd(host) == 0) { - mmc_claim_host(host); mmc_power_off(host); mmc_release_host(host); goto out; } - mmc_claim_host(host); for (i = 0; i < ARRAY_SIZE(freqs); i++) { if (!mmc_rescan_try_freq(host, max(freqs[i], host->f_min))) break; @@ -2663,7 +2663,6 @@ void mmc_stop_host(struct mmc_host *host) host->rescan_disable = 1; cancel_delayed_work_sync(&host->detect); - mmc_flush_scheduled_work(); /* clear pm flags now and let card drivers set them as needed */ host->pm_flags = 0; @@ -2759,14 +2758,13 @@ int mmc_flush_cache(struct mmc_card *card) } EXPORT_SYMBOL(mmc_flush_cache); -#ifdef CONFIG_PM - +#ifdef CONFIG_PM_SLEEP /* Do the card removal on suspend if card is assumed removeable * Do that in pm notifier while userspace isn't yet frozen, so we will be able to sync the card. */ -int mmc_pm_notify(struct notifier_block *notify_block, - unsigned long mode, void *unused) +static int mmc_pm_notify(struct notifier_block *notify_block, + unsigned long mode, void *unused) { struct mmc_host *host = container_of( notify_block, struct mmc_host, pm_notify); @@ -2813,6 +2811,17 @@ int mmc_pm_notify(struct notifier_block *notify_block, return 0; } + +void mmc_register_pm_notifier(struct mmc_host *host) +{ + host->pm_notify.notifier_call = mmc_pm_notify; + register_pm_notifier(&host->pm_notify); +} + +void mmc_unregister_pm_notifier(struct mmc_host *host) +{ + unregister_pm_notifier(&host->pm_notify); +} #endif /** @@ -2836,13 +2845,9 @@ static int __init mmc_init(void) { int ret; - workqueue = alloc_ordered_workqueue("kmmcd", 0); - if (!workqueue) - return -ENOMEM; - ret = mmc_register_bus(); if (ret) - goto destroy_workqueue; + return ret; ret = mmc_register_host_class(); if (ret) @@ -2858,9 +2863,6 @@ unregister_host_class: mmc_unregister_host_class(); unregister_bus: mmc_unregister_bus(); -destroy_workqueue: - destroy_workqueue(workqueue); - return ret; } @@ -2869,7 +2871,6 @@ static void __exit mmc_exit(void) sdio_unregister_bus(); mmc_unregister_host_class(); mmc_unregister_bus(); - destroy_workqueue(workqueue); } subsys_initcall(mmc_init); diff --git a/drivers/mmc/core/core.h b/drivers/mmc/core/core.h index 09241e56d628..0fa86a2afc26 100644 --- a/drivers/mmc/core/core.h +++ b/drivers/mmc/core/core.h @@ -90,5 +90,13 @@ int mmc_execute_tuning(struct mmc_card *card); int mmc_hs200_to_hs400(struct mmc_card *card); int mmc_hs400_to_hs200(struct mmc_card *card); +#ifdef CONFIG_PM_SLEEP +void mmc_register_pm_notifier(struct mmc_host *host); +void mmc_unregister_pm_notifier(struct mmc_host *host); +#else +static inline void mmc_register_pm_notifier(struct mmc_host *host) { } +static inline void mmc_unregister_pm_notifier(struct mmc_host *host) { } +#endif + #endif diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index da950c44204d..0aecd5c00b86 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -21,7 +21,6 @@ #include <linux/export.h> #include <linux/leds.h> #include <linux/slab.h> -#include <linux/suspend.h> #include <linux/mmc/host.h> #include <linux/mmc/card.h> @@ -275,7 +274,8 @@ int mmc_of_parse(struct mmc_host *host) host->caps2 |= MMC_CAP2_FULL_PWR_CYCLE; if (of_property_read_bool(np, "keep-power-in-suspend")) host->pm_caps |= MMC_PM_KEEP_POWER; - if (of_property_read_bool(np, "enable-sdio-wakeup")) + if (of_property_read_bool(np, "wakeup-source") || + of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */ host->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; if (of_property_read_bool(np, "mmc-ddr-1_8v")) host->caps |= MMC_CAP_1_8V_DDR; @@ -348,9 +348,6 @@ struct mmc_host *mmc_alloc_host(int extra, struct device *dev) spin_lock_init(&host->lock); init_waitqueue_head(&host->wq); INIT_DELAYED_WORK(&host->detect, mmc_rescan); -#ifdef CONFIG_PM - host->pm_notify.notifier_call = mmc_pm_notify; -#endif setup_timer(&host->retune_timer, mmc_retune_timer, (unsigned long)host); /* @@ -395,7 +392,7 @@ int mmc_add_host(struct mmc_host *host) #endif mmc_start_host(host); - register_pm_notifier(&host->pm_notify); + mmc_register_pm_notifier(host); return 0; } @@ -412,7 +409,7 @@ EXPORT_SYMBOL(mmc_add_host); */ void mmc_remove_host(struct mmc_host *host) { - unregister_pm_notifier(&host->pm_notify); + mmc_unregister_pm_notifier(host); mmc_stop_host(host); #ifdef CONFIG_DEBUG_FS diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index 3a9a79ec4343..bf49e44571f2 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -1076,8 +1076,7 @@ static int mmc_select_hs400(struct mmc_card *card) mmc_set_clock(host, max_dtr); /* Switch card to HS mode */ - val = EXT_CSD_TIMING_HS | - card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + val = EXT_CSD_TIMING_HS; err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, val, card->ext_csd.generic_cmd6_time, @@ -1160,8 +1159,7 @@ int mmc_hs400_to_hs200(struct mmc_card *card) mmc_set_clock(host, max_dtr); /* Switch HS400 to HS DDR */ - val = EXT_CSD_TIMING_HS | - card->drive_strength << EXT_CSD_DRV_STR_SHIFT; + val = EXT_CSD_TIMING_HS; err = __mmc_switch(card, EXT_CSD_CMD_SET_NORMAL, EXT_CSD_HS_TIMING, val, card->ext_csd.generic_cmd6_time, true, send_status, true); @@ -1907,16 +1905,8 @@ static int mmc_shutdown(struct mmc_host *host) */ static int mmc_resume(struct mmc_host *host) { - int err = 0; - - if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) { - err = _mmc_resume(host); - pm_runtime_set_active(&host->card->dev); - pm_runtime_mark_last_busy(&host->card->dev); - } pm_runtime_enable(&host->card->dev); - - return err; + return 0; } /* @@ -1944,12 +1934,9 @@ static int mmc_runtime_resume(struct mmc_host *host) { int err; - if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME))) - return 0; - err = _mmc_resume(host); - if (err) - pr_err("%s: error %d doing aggressive resume\n", + if (err && err != -ENOMEDIUM) + pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err); return 0; diff --git a/drivers/mmc/core/mmc_ops.c b/drivers/mmc/core/mmc_ops.c index 1f444269ebbe..2c90635c89af 100644 --- a/drivers/mmc/core/mmc_ops.c +++ b/drivers/mmc/core/mmc_ops.c @@ -489,6 +489,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, unsigned long timeout; u32 status = 0; bool use_r1b_resp = use_busy_signal; + bool expired = false; mmc_retune_hold(host); @@ -545,6 +546,12 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, timeout = jiffies + msecs_to_jiffies(timeout_ms); do { if (send_status) { + /* + * Due to the possibility of being preempted after + * sending the status command, check the expiration + * time first. + */ + expired = time_after(jiffies, timeout); err = __mmc_send_status(card, &status, ignore_crc); if (err) goto out; @@ -565,7 +572,7 @@ int __mmc_switch(struct mmc_card *card, u8 set, u8 index, u8 value, } /* Timeout if the device never leaves the program state. */ - if (time_after(jiffies, timeout)) { + if (expired && R1_CURRENT_STATE(status) == R1_STATE_PRG) { pr_err("%s: Card stuck in programming state! %s\n", mmc_hostname(host), __func__); err = -ETIMEDOUT; diff --git a/drivers/mmc/core/pwrseq.h b/drivers/mmc/core/pwrseq.h index 096da48c6a7e..133de0426687 100644 --- a/drivers/mmc/core/pwrseq.h +++ b/drivers/mmc/core/pwrseq.h @@ -16,7 +16,7 @@ struct mmc_pwrseq_ops { }; struct mmc_pwrseq { - struct mmc_pwrseq_ops *ops; + const struct mmc_pwrseq_ops *ops; }; #ifdef CONFIG_OF diff --git a/drivers/mmc/core/pwrseq_emmc.c b/drivers/mmc/core/pwrseq_emmc.c index ad4f94ec7e8d..4a82bc77fe49 100644 --- a/drivers/mmc/core/pwrseq_emmc.c +++ b/drivers/mmc/core/pwrseq_emmc.c @@ -51,7 +51,7 @@ static void mmc_pwrseq_emmc_free(struct mmc_host *host) kfree(pwrseq); } -static struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = { +static const struct mmc_pwrseq_ops mmc_pwrseq_emmc_ops = { .post_power_on = mmc_pwrseq_emmc_reset, .free = mmc_pwrseq_emmc_free, }; diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c index d10538bb5e07..2b16263458af 100644 --- a/drivers/mmc/core/pwrseq_simple.c +++ b/drivers/mmc/core/pwrseq_simple.c @@ -87,7 +87,7 @@ static void mmc_pwrseq_simple_free(struct mmc_host *host) kfree(pwrseq); } -static struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = { +static const struct mmc_pwrseq_ops mmc_pwrseq_simple_ops = { .pre_power_on = mmc_pwrseq_simple_pre_power_on, .post_power_on = mmc_pwrseq_simple_post_power_on, .power_off = mmc_pwrseq_simple_power_off, diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 141eaa923e18..f2b164b214ae 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -1128,16 +1128,8 @@ out: */ static int mmc_sd_resume(struct mmc_host *host) { - int err = 0; - - if (!(host->caps & MMC_CAP_RUNTIME_RESUME)) { - err = _mmc_sd_resume(host); - pm_runtime_set_active(&host->card->dev); - pm_runtime_mark_last_busy(&host->card->dev); - } pm_runtime_enable(&host->card->dev); - - return err; + return 0; } /* @@ -1165,12 +1157,9 @@ static int mmc_sd_runtime_resume(struct mmc_host *host) { int err; - if (!(host->caps & (MMC_CAP_AGGRESSIVE_PM | MMC_CAP_RUNTIME_RESUME))) - return 0; - err = _mmc_sd_resume(host); - if (err) - pr_err("%s: error %d doing aggressive resume\n", + if (err && err != -ENOMEDIUM) + pr_err("%s: error %d doing runtime resume\n", mmc_hostname(host), err); return 0; diff --git a/drivers/mmc/core/sdio.c b/drivers/mmc/core/sdio.c index 16d838e6d623..d61ba1a0495e 100644 --- a/drivers/mmc/core/sdio.c +++ b/drivers/mmc/core/sdio.c @@ -630,7 +630,7 @@ try_again: */ if (!powered_resume && (rocr & ocr & R4_18V_PRESENT)) { err = mmc_set_signal_voltage(host, MMC_SIGNAL_VOLTAGE_180, - ocr); + ocr_card); if (err == -EAGAIN) { sdio_reset(host); mmc_go_idle(host); diff --git a/drivers/mmc/core/sdio_bus.c b/drivers/mmc/core/sdio_bus.c index 7e327a6dd53d..86f5b3223aae 100644 --- a/drivers/mmc/core/sdio_bus.c +++ b/drivers/mmc/core/sdio_bus.c @@ -322,6 +322,7 @@ int sdio_add_func(struct sdio_func *func) sdio_set_of_node(func); sdio_acpi_set_handle(func); + device_enable_async_suspend(&func->dev); ret = device_add(&func->dev); if (ret == 0) sdio_func_set_present(func); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 1dee533634c9..1526b8a10b09 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -455,6 +455,7 @@ config MMC_TIFM_SD config MMC_MVSDIO tristate "Marvell MMC/SD/SDIO host driver" depends on PLAT_ORION + depends on OF ---help--- This selects the Marvell SDIO host driver. SDIO may currently be found on the Kirkwood 88F6281 and 88F6192 diff --git a/drivers/mmc/host/atmel-mci-regs.h b/drivers/mmc/host/atmel-mci-regs.h deleted file mode 100644 index 0aa44e679df4..000000000000 --- a/drivers/mmc/host/atmel-mci-regs.h +++ /dev/null @@ -1,171 +0,0 @@ -/* - * Atmel MultiMedia Card Interface driver - * - * Copyright (C) 2004-2006 Atmel Corporation - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -/* - * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors - * Registers and bitfields marked with [2] are only available in MCI2 - */ - -#ifndef __DRIVERS_MMC_ATMEL_MCI_H__ -#define __DRIVERS_MMC_ATMEL_MCI_H__ - -/* MCI Register Definitions */ -#define ATMCI_CR 0x0000 /* Control */ -# define ATMCI_CR_MCIEN ( 1 << 0) /* MCI Enable */ -# define ATMCI_CR_MCIDIS ( 1 << 1) /* MCI Disable */ -# define ATMCI_CR_PWSEN ( 1 << 2) /* Power Save Enable */ -# define ATMCI_CR_PWSDIS ( 1 << 3) /* Power Save Disable */ -# define ATMCI_CR_SWRST ( 1 << 7) /* Software Reset */ -#define ATMCI_MR 0x0004 /* Mode */ -# define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ -# define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ -# define ATMCI_MR_RDPROOF ( 1 << 11) /* Read Proof */ -# define ATMCI_MR_WRPROOF ( 1 << 12) /* Write Proof */ -# define ATMCI_MR_PDCFBYTE ( 1 << 13) /* Force Byte Transfer */ -# define ATMCI_MR_PDCPADV ( 1 << 14) /* Padding Value */ -# define ATMCI_MR_PDCMODE ( 1 << 15) /* PDC-oriented Mode */ -# define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */ -#define ATMCI_DTOR 0x0008 /* Data Timeout */ -# define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ -# define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ -#define ATMCI_SDCR 0x000c /* SD Card / SDIO */ -# define ATMCI_SDCSEL_SLOT_A ( 0 << 0) /* Select SD slot A */ -# define ATMCI_SDCSEL_SLOT_B ( 1 << 0) /* Select SD slot A */ -# define ATMCI_SDCSEL_MASK ( 3 << 0) -# define ATMCI_SDCBUS_1BIT ( 0 << 6) /* 1-bit data bus */ -# define ATMCI_SDCBUS_4BIT ( 2 << 6) /* 4-bit data bus */ -# define ATMCI_SDCBUS_8BIT ( 3 << 6) /* 8-bit data bus[2] */ -# define ATMCI_SDCBUS_MASK ( 3 << 6) -#define ATMCI_ARGR 0x0010 /* Command Argument */ -#define ATMCI_CMDR 0x0014 /* Command */ -# define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ -# define ATMCI_CMDR_RSPTYP_NONE ( 0 << 6) /* No response */ -# define ATMCI_CMDR_RSPTYP_48BIT ( 1 << 6) /* 48-bit response */ -# define ATMCI_CMDR_RSPTYP_136BIT ( 2 << 6) /* 136-bit response */ -# define ATMCI_CMDR_SPCMD_INIT ( 1 << 8) /* Initialization command */ -# define ATMCI_CMDR_SPCMD_SYNC ( 2 << 8) /* Synchronized command */ -# define ATMCI_CMDR_SPCMD_INT ( 4 << 8) /* Interrupt command */ -# define ATMCI_CMDR_SPCMD_INTRESP ( 5 << 8) /* Interrupt response */ -# define ATMCI_CMDR_OPDCMD ( 1 << 11) /* Open Drain */ -# define ATMCI_CMDR_MAXLAT_5CYC ( 0 << 12) /* Max latency 5 cycles */ -# define ATMCI_CMDR_MAXLAT_64CYC ( 1 << 12) /* Max latency 64 cycles */ -# define ATMCI_CMDR_START_XFER ( 1 << 16) /* Start data transfer */ -# define ATMCI_CMDR_STOP_XFER ( 2 << 16) /* Stop data transfer */ -# define ATMCI_CMDR_TRDIR_WRITE ( 0 << 18) /* Write data */ -# define ATMCI_CMDR_TRDIR_READ ( 1 << 18) /* Read data */ -# define ATMCI_CMDR_BLOCK ( 0 << 19) /* Single-block transfer */ -# define ATMCI_CMDR_MULTI_BLOCK ( 1 << 19) /* Multi-block transfer */ -# define ATMCI_CMDR_STREAM ( 2 << 19) /* MMC Stream transfer */ -# define ATMCI_CMDR_SDIO_BYTE ( 4 << 19) /* SDIO Byte transfer */ -# define ATMCI_CMDR_SDIO_BLOCK ( 5 << 19) /* SDIO Block transfer */ -# define ATMCI_CMDR_SDIO_SUSPEND ( 1 << 24) /* SDIO Suspend Command */ -# define ATMCI_CMDR_SDIO_RESUME ( 2 << 24) /* SDIO Resume Command */ -#define ATMCI_BLKR 0x0018 /* Block */ -# define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */ -# define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ -#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ -# define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ -# define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ -#define ATMCI_RSPR 0x0020 /* Response 0 */ -#define ATMCI_RSPR1 0x0024 /* Response 1 */ -#define ATMCI_RSPR2 0x0028 /* Response 2 */ -#define ATMCI_RSPR3 0x002c /* Response 3 */ -#define ATMCI_RDR 0x0030 /* Receive Data */ -#define ATMCI_TDR 0x0034 /* Transmit Data */ -#define ATMCI_SR 0x0040 /* Status */ -#define ATMCI_IER 0x0044 /* Interrupt Enable */ -#define ATMCI_IDR 0x0048 /* Interrupt Disable */ -#define ATMCI_IMR 0x004c /* Interrupt Mask */ -# define ATMCI_CMDRDY ( 1 << 0) /* Command Ready */ -# define ATMCI_RXRDY ( 1 << 1) /* Receiver Ready */ -# define ATMCI_TXRDY ( 1 << 2) /* Transmitter Ready */ -# define ATMCI_BLKE ( 1 << 3) /* Data Block Ended */ -# define ATMCI_DTIP ( 1 << 4) /* Data Transfer In Progress */ -# define ATMCI_NOTBUSY ( 1 << 5) /* Data Not Busy */ -# define ATMCI_ENDRX ( 1 << 6) /* End of RX Buffer */ -# define ATMCI_ENDTX ( 1 << 7) /* End of TX Buffer */ -# define ATMCI_SDIOIRQA ( 1 << 8) /* SDIO IRQ in slot A */ -# define ATMCI_SDIOIRQB ( 1 << 9) /* SDIO IRQ in slot B */ -# define ATMCI_SDIOWAIT ( 1 << 12) /* SDIO Read Wait Operation Status */ -# define ATMCI_CSRCV ( 1 << 13) /* CE-ATA Completion Signal Received */ -# define ATMCI_RXBUFF ( 1 << 14) /* RX Buffer Full */ -# define ATMCI_TXBUFE ( 1 << 15) /* TX Buffer Empty */ -# define ATMCI_RINDE ( 1 << 16) /* Response Index Error */ -# define ATMCI_RDIRE ( 1 << 17) /* Response Direction Error */ -# define ATMCI_RCRCE ( 1 << 18) /* Response CRC Error */ -# define ATMCI_RENDE ( 1 << 19) /* Response End Bit Error */ -# define ATMCI_RTOE ( 1 << 20) /* Response Time-Out Error */ -# define ATMCI_DCRCE ( 1 << 21) /* Data CRC Error */ -# define ATMCI_DTOE ( 1 << 22) /* Data Time-Out Error */ -# define ATMCI_CSTOE ( 1 << 23) /* Completion Signal Time-out Error */ -# define ATMCI_BLKOVRE ( 1 << 24) /* DMA Block Overrun Error */ -# define ATMCI_DMADONE ( 1 << 25) /* DMA Transfer Done */ -# define ATMCI_FIFOEMPTY ( 1 << 26) /* FIFO Empty Flag */ -# define ATMCI_XFRDONE ( 1 << 27) /* Transfer Done Flag */ -# define ATMCI_ACKRCV ( 1 << 28) /* Boot Operation Acknowledge Received */ -# define ATMCI_ACKRCVE ( 1 << 29) /* Boot Operation Acknowledge Error */ -# define ATMCI_OVRE ( 1 << 30) /* RX Overrun Error */ -# define ATMCI_UNRE ( 1 << 31) /* TX Underrun Error */ -#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */ -# define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ -# define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ -# define ATMCI_DMAEN ( 1 << 8) /* DMA Hardware Handshaking Enable */ -#define ATMCI_CFG 0x0054 /* Configuration[2] */ -# define ATMCI_CFG_FIFOMODE_1DATA ( 1 << 0) /* MCI Internal FIFO control mode */ -# define ATMCI_CFG_FERRCTRL_COR ( 1 << 4) /* Flow Error flag reset control mode */ -# define ATMCI_CFG_HSMODE ( 1 << 8) /* High Speed Mode */ -# define ATMCI_CFG_LSYNC ( 1 << 12) /* Synchronize on the last block */ -#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */ -# define ATMCI_WP_EN ( 1 << 0) /* WP Enable */ -# define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */ -#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */ -# define ATMCI_GET_WP_VS(x) ((x) & 0x0f) -# define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) -#define ATMCI_VERSION 0x00FC /* Version */ -#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ - -/* This is not including the FIFO Aperture on MCI2 */ -#define ATMCI_REGS_SIZE 0x100 - -/* Register access macros */ -#ifdef CONFIG_AVR32 -#define atmci_readl(port, reg) \ - __raw_readl((port)->regs + reg) -#define atmci_writel(port, reg, value) \ - __raw_writel((value), (port)->regs + reg) -#else -#define atmci_readl(port, reg) \ - readl_relaxed((port)->regs + reg) -#define atmci_writel(port, reg, value) \ - writel_relaxed((value), (port)->regs + reg) -#endif - -/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */ -#ifdef CONFIG_AVR32 -# define ATMCI_PDC_CONNECTED 0 -#else -# define ATMCI_PDC_CONNECTED 1 -#endif - -/* - * Fix sconfig's burst size according to atmel MCI. We need to convert them as: - * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. - * - * This can be done by finding most significant bit set. - */ -static inline unsigned int atmci_convert_chksize(unsigned int maxburst) -{ - if (maxburst > 1) - return fls(maxburst) - 2; - else - return 0; -} - -#endif /* __DRIVERS_MMC_ATMEL_MCI_H__ */ diff --git a/drivers/mmc/host/atmel-mci.c b/drivers/mmc/host/atmel-mci.c index bf62e429f7fc..a36ebdae2388 100644 --- a/drivers/mmc/host/atmel-mci.c +++ b/drivers/mmc/host/atmel-mci.c @@ -44,7 +44,141 @@ #include <asm/io.h> #include <asm/unaligned.h> -#include "atmel-mci-regs.h" +/* + * Superset of MCI IP registers integrated in Atmel AVR32 and AT91 Processors + * Registers and bitfields marked with [2] are only available in MCI2 + */ + +/* MCI Register Definitions */ +#define ATMCI_CR 0x0000 /* Control */ +#define ATMCI_CR_MCIEN BIT(0) /* MCI Enable */ +#define ATMCI_CR_MCIDIS BIT(1) /* MCI Disable */ +#define ATMCI_CR_PWSEN BIT(2) /* Power Save Enable */ +#define ATMCI_CR_PWSDIS BIT(3) /* Power Save Disable */ +#define ATMCI_CR_SWRST BIT(7) /* Software Reset */ +#define ATMCI_MR 0x0004 /* Mode */ +#define ATMCI_MR_CLKDIV(x) ((x) << 0) /* Clock Divider */ +#define ATMCI_MR_PWSDIV(x) ((x) << 8) /* Power Saving Divider */ +#define ATMCI_MR_RDPROOF BIT(11) /* Read Proof */ +#define ATMCI_MR_WRPROOF BIT(12) /* Write Proof */ +#define ATMCI_MR_PDCFBYTE BIT(13) /* Force Byte Transfer */ +#define ATMCI_MR_PDCPADV BIT(14) /* Padding Value */ +#define ATMCI_MR_PDCMODE BIT(15) /* PDC-oriented Mode */ +#define ATMCI_MR_CLKODD(x) ((x) << 16) /* LSB of Clock Divider */ +#define ATMCI_DTOR 0x0008 /* Data Timeout */ +#define ATMCI_DTOCYC(x) ((x) << 0) /* Data Timeout Cycles */ +#define ATMCI_DTOMUL(x) ((x) << 4) /* Data Timeout Multiplier */ +#define ATMCI_SDCR 0x000c /* SD Card / SDIO */ +#define ATMCI_SDCSEL_SLOT_A (0 << 0) /* Select SD slot A */ +#define ATMCI_SDCSEL_SLOT_B (1 << 0) /* Select SD slot A */ +#define ATMCI_SDCSEL_MASK (3 << 0) +#define ATMCI_SDCBUS_1BIT (0 << 6) /* 1-bit data bus */ +#define ATMCI_SDCBUS_4BIT (2 << 6) /* 4-bit data bus */ +#define ATMCI_SDCBUS_8BIT (3 << 6) /* 8-bit data bus[2] */ +#define ATMCI_SDCBUS_MASK (3 << 6) +#define ATMCI_ARGR 0x0010 /* Command Argument */ +#define ATMCI_CMDR 0x0014 /* Command */ +#define ATMCI_CMDR_CMDNB(x) ((x) << 0) /* Command Opcode */ +#define ATMCI_CMDR_RSPTYP_NONE (0 << 6) /* No response */ +#define ATMCI_CMDR_RSPTYP_48BIT (1 << 6) /* 48-bit response */ +#define ATMCI_CMDR_RSPTYP_136BIT (2 << 6) /* 136-bit response */ +#define ATMCI_CMDR_SPCMD_INIT (1 << 8) /* Initialization command */ +#define ATMCI_CMDR_SPCMD_SYNC (2 << 8) /* Synchronized command */ +#define ATMCI_CMDR_SPCMD_INT (4 << 8) /* Interrupt command */ +#define ATMCI_CMDR_SPCMD_INTRESP (5 << 8) /* Interrupt response */ +#define ATMCI_CMDR_OPDCMD (1 << 11) /* Open Drain */ +#define ATMCI_CMDR_MAXLAT_5CYC (0 << 12) /* Max latency 5 cycles */ +#define ATMCI_CMDR_MAXLAT_64CYC (1 << 12) /* Max latency 64 cycles */ +#define ATMCI_CMDR_START_XFER (1 << 16) /* Start data transfer */ +#define ATMCI_CMDR_STOP_XFER (2 << 16) /* Stop data transfer */ +#define ATMCI_CMDR_TRDIR_WRITE (0 << 18) /* Write data */ +#define ATMCI_CMDR_TRDIR_READ (1 << 18) /* Read data */ +#define ATMCI_CMDR_BLOCK (0 << 19) /* Single-block transfer */ +#define ATMCI_CMDR_MULTI_BLOCK (1 << 19) /* Multi-block transfer */ +#define ATMCI_CMDR_STREAM (2 << 19) /* MMC Stream transfer */ +#define ATMCI_CMDR_SDIO_BYTE (4 << 19) /* SDIO Byte transfer */ +#define ATMCI_CMDR_SDIO_BLOCK (5 << 19) /* SDIO Block transfer */ +#define ATMCI_CMDR_SDIO_SUSPEND (1 << 24) /* SDIO Suspend Command */ +#define ATMCI_CMDR_SDIO_RESUME (2 << 24) /* SDIO Resume Command */ +#define ATMCI_BLKR 0x0018 /* Block */ +#define ATMCI_BCNT(x) ((x) << 0) /* Data Block Count */ +#define ATMCI_BLKLEN(x) ((x) << 16) /* Data Block Length */ +#define ATMCI_CSTOR 0x001c /* Completion Signal Timeout[2] */ +#define ATMCI_CSTOCYC(x) ((x) << 0) /* CST cycles */ +#define ATMCI_CSTOMUL(x) ((x) << 4) /* CST multiplier */ +#define ATMCI_RSPR 0x0020 /* Response 0 */ +#define ATMCI_RSPR1 0x0024 /* Response 1 */ +#define ATMCI_RSPR2 0x0028 /* Response 2 */ +#define ATMCI_RSPR3 0x002c /* Response 3 */ +#define ATMCI_RDR 0x0030 /* Receive Data */ +#define ATMCI_TDR 0x0034 /* Transmit Data */ +#define ATMCI_SR 0x0040 /* Status */ +#define ATMCI_IER 0x0044 /* Interrupt Enable */ +#define ATMCI_IDR 0x0048 /* Interrupt Disable */ +#define ATMCI_IMR 0x004c /* Interrupt Mask */ +#define ATMCI_CMDRDY BIT(0) /* Command Ready */ +#define ATMCI_RXRDY BIT(1) /* Receiver Ready */ +#define ATMCI_TXRDY BIT(2) /* Transmitter Ready */ +#define ATMCI_BLKE BIT(3) /* Data Block Ended */ +#define ATMCI_DTIP BIT(4) /* Data Transfer In Progress */ +#define ATMCI_NOTBUSY BIT(5) /* Data Not Busy */ +#define ATMCI_ENDRX BIT(6) /* End of RX Buffer */ +#define ATMCI_ENDTX BIT(7) /* End of TX Buffer */ +#define ATMCI_SDIOIRQA BIT(8) /* SDIO IRQ in slot A */ +#define ATMCI_SDIOIRQB BIT(9) /* SDIO IRQ in slot B */ +#define ATMCI_SDIOWAIT BIT(12) /* SDIO Read Wait Operation Status */ +#define ATMCI_CSRCV BIT(13) /* CE-ATA Completion Signal Received */ +#define ATMCI_RXBUFF BIT(14) /* RX Buffer Full */ +#define ATMCI_TXBUFE BIT(15) /* TX Buffer Empty */ +#define ATMCI_RINDE BIT(16) /* Response Index Error */ +#define ATMCI_RDIRE BIT(17) /* Response Direction Error */ +#define ATMCI_RCRCE BIT(18) /* Response CRC Error */ +#define ATMCI_RENDE BIT(19) /* Response End Bit Error */ +#define ATMCI_RTOE BIT(20) /* Response Time-Out Error */ +#define ATMCI_DCRCE BIT(21) /* Data CRC Error */ +#define ATMCI_DTOE BIT(22) /* Data Time-Out Error */ +#define ATMCI_CSTOE BIT(23) /* Completion Signal Time-out Error */ +#define ATMCI_BLKOVRE BIT(24) /* DMA Block Overrun Error */ +#define ATMCI_DMADONE BIT(25) /* DMA Transfer Done */ +#define ATMCI_FIFOEMPTY BIT(26) /* FIFO Empty Flag */ +#define ATMCI_XFRDONE BIT(27) /* Transfer Done Flag */ +#define ATMCI_ACKRCV BIT(28) /* Boot Operation Acknowledge Received */ +#define ATMCI_ACKRCVE BIT(29) /* Boot Operation Acknowledge Error */ +#define ATMCI_OVRE BIT(30) /* RX Overrun Error */ +#define ATMCI_UNRE BIT(31) /* TX Underrun Error */ +#define ATMCI_DMA 0x0050 /* DMA Configuration[2] */ +#define ATMCI_DMA_OFFSET(x) ((x) << 0) /* DMA Write Buffer Offset */ +#define ATMCI_DMA_CHKSIZE(x) ((x) << 4) /* DMA Channel Read and Write Chunk Size */ +#define ATMCI_DMAEN BIT(8) /* DMA Hardware Handshaking Enable */ +#define ATMCI_CFG 0x0054 /* Configuration[2] */ +#define ATMCI_CFG_FIFOMODE_1DATA BIT(0) /* MCI Internal FIFO control mode */ +#define ATMCI_CFG_FERRCTRL_COR BIT(4) /* Flow Error flag reset control mode */ +#define ATMCI_CFG_HSMODE BIT(8) /* High Speed Mode */ +#define ATMCI_CFG_LSYNC BIT(12) /* Synchronize on the last block */ +#define ATMCI_WPMR 0x00e4 /* Write Protection Mode[2] */ +#define ATMCI_WP_EN BIT(0) /* WP Enable */ +#define ATMCI_WP_KEY (0x4d4349 << 8) /* WP Key */ +#define ATMCI_WPSR 0x00e8 /* Write Protection Status[2] */ +#define ATMCI_GET_WP_VS(x) ((x) & 0x0f) +#define ATMCI_GET_WP_VSRC(x) (((x) >> 8) & 0xffff) +#define ATMCI_VERSION 0x00FC /* Version */ +#define ATMCI_FIFO_APERTURE 0x0200 /* FIFO Aperture[2] */ + +/* This is not including the FIFO Aperture on MCI2 */ +#define ATMCI_REGS_SIZE 0x100 + +/* Register access macros */ +#define atmci_readl(port, reg) \ + __raw_readl((port)->regs + reg) +#define atmci_writel(port, reg, value) \ + __raw_writel((value), (port)->regs + reg) + +/* On AVR chips the Peripheral DMA Controller is not connected to MCI. */ +#ifdef CONFIG_AVR32 +# define ATMCI_PDC_CONNECTED 0 +#else +# define ATMCI_PDC_CONNECTED 1 +#endif #define AUTOSUSPEND_DELAY 50 @@ -584,6 +718,29 @@ static inline unsigned int atmci_get_version(struct atmel_mci *host) return atmci_readl(host, ATMCI_VERSION) & 0x00000fff; } +/* + * Fix sconfig's burst size according to atmel MCI. We need to convert them as: + * 1 -> 0, 4 -> 1, 8 -> 2, 16 -> 3. + * With version 0x600, we need to convert them as: 1 -> 0, 2 -> 1, 4 -> 2, + * 8 -> 3, 16 -> 4. + * + * This can be done by finding most significant bit set. + */ +static inline unsigned int atmci_convert_chksize(struct atmel_mci *host, + unsigned int maxburst) +{ + unsigned int version = atmci_get_version(host); + unsigned int offset = 2; + + if (version >= 0x600) + offset = 1; + + if (maxburst > 1) + return fls(maxburst) - offset; + else + return 0; +} + static void atmci_timeout_timer(unsigned long data) { struct atmel_mci *host; @@ -1034,11 +1191,13 @@ atmci_prepare_data_dma(struct atmel_mci *host, struct mmc_data *data) if (data->flags & MMC_DATA_READ) { direction = DMA_FROM_DEVICE; host->dma_conf.direction = slave_dirn = DMA_DEV_TO_MEM; - maxburst = atmci_convert_chksize(host->dma_conf.src_maxburst); + maxburst = atmci_convert_chksize(host, + host->dma_conf.src_maxburst); } else { direction = DMA_TO_DEVICE; host->dma_conf.direction = slave_dirn = DMA_MEM_TO_DEV; - maxburst = atmci_convert_chksize(host->dma_conf.dst_maxburst); + maxburst = atmci_convert_chksize(host, + host->dma_conf.dst_maxburst); } if (host->caps.has_dma_conf_reg) diff --git a/drivers/mmc/host/cb710-mmc.h b/drivers/mmc/host/cb710-mmc.h index 8984ec878fc9..8ecd9e56636a 100644 --- a/drivers/mmc/host/cb710-mmc.h +++ b/drivers/mmc/host/cb710-mmc.h @@ -29,8 +29,7 @@ static inline struct mmc_host *cb710_slot_to_mmc(struct cb710_slot *slot) static inline struct cb710_slot *cb710_mmc_to_slot(struct mmc_host *mmc) { - struct platform_device *pdev = container_of(mmc_dev(mmc), - struct platform_device, dev); + struct platform_device *pdev = to_platform_device(mmc_dev(mmc)); return cb710_pdev_to_slot(pdev); } diff --git a/drivers/mmc/host/dw_mmc-pltfm.c b/drivers/mmc/host/dw_mmc-pltfm.c index 7e1d13b68b06..81bdeeb05a4d 100644 --- a/drivers/mmc/host/dw_mmc-pltfm.c +++ b/drivers/mmc/host/dw_mmc-pltfm.c @@ -60,7 +60,7 @@ int dw_mci_pltfm_register(struct platform_device *pdev, regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); /* Get registers' physical base address */ - host->phy_regs = (void *)(regs->start); + host->phy_regs = regs->start; host->regs = devm_ioremap_resource(&pdev->dev, regs); if (IS_ERR(host->regs)) return PTR_ERR(host->regs); diff --git a/drivers/mmc/host/dw_mmc-rockchip.c b/drivers/mmc/host/dw_mmc-rockchip.c index 9becebeeccd1..d9c92f31da64 100644 --- a/drivers/mmc/host/dw_mmc-rockchip.c +++ b/drivers/mmc/host/dw_mmc-rockchip.c @@ -239,20 +239,12 @@ static int dw_mci_rockchip_init(struct dw_mci *host) return 0; } -/* Common capabilities of RK3288 SoC */ -static unsigned long dw_mci_rk3288_dwmmc_caps[4] = { - MMC_CAP_RUNTIME_RESUME, /* emmc */ - MMC_CAP_RUNTIME_RESUME, /* sdmmc */ - MMC_CAP_RUNTIME_RESUME, /* sdio0 */ - MMC_CAP_RUNTIME_RESUME, /* sdio1 */ -}; static const struct dw_mci_drv_data rk2928_drv_data = { .prepare_command = dw_mci_rockchip_prepare_command, .init = dw_mci_rockchip_init, }; static const struct dw_mci_drv_data rk3288_drv_data = { - .caps = dw_mci_rk3288_dwmmc_caps, .prepare_command = dw_mci_rockchip_prepare_command, .set_ios = dw_mci_rk3288_set_ios, .execute_tuning = dw_mci_rk3288_execute_tuning, diff --git a/drivers/mmc/host/dw_mmc.c b/drivers/mmc/host/dw_mmc.c index 7a6cedbe48a8..712835177e8b 100644 --- a/drivers/mmc/host/dw_mmc.c +++ b/drivers/mmc/host/dw_mmc.c @@ -699,7 +699,7 @@ static int dw_mci_edmac_start_dma(struct dw_mci *host, int ret = 0; /* Set external dma config: burst size, burst width */ - cfg.dst_addr = (dma_addr_t)(host->phy_regs + fifo_offset); + cfg.dst_addr = host->phy_regs + fifo_offset; cfg.src_addr = cfg.dst_addr; cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; cfg.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; @@ -1634,12 +1634,6 @@ static int dw_mci_command_complete(struct dw_mci *host, struct mmc_command *cmd) else cmd->error = 0; - if (cmd->error) { - /* newer ip versions need a delay between retries */ - if (host->quirks & DW_MCI_QUIRK_RETRY_DELAY) - mdelay(20); - } - return cmd->error; } @@ -2355,16 +2349,6 @@ static irqreturn_t dw_mci_interrupt(int irq, void *dev_id) pending = mci_readl(host, MINTSTS); /* read-only mask reg */ - /* - * DTO fix - version 2.10a and below, and only if internal DMA - * is configured. - */ - if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) { - if (!pending && - ((mci_readl(host, STATUS) >> 17) & 0x1fff)) - pending |= SDMMC_INT_DATA_OVER; - } - if (pending) { /* Check volt switch first, since it can look like an error */ if ((host->state == STATE_SENDING_CMD11) && @@ -3165,9 +3149,6 @@ int dw_mci_probe(struct dw_mci *host) /* Now that slots are all setup, we can enable card detect */ dw_mci_enable_cd(host); - if (host->quirks & DW_MCI_QUIRK_IDMAC_DTO) - dev_info(host->dev, "Internal DMAC interrupt fix enabled.\n"); - return 0; err_dmaunmap: diff --git a/drivers/mmc/host/mtk-sd.c b/drivers/mmc/host/mtk-sd.c index 33dfd7e72516..82a97ac4e956 100644 --- a/drivers/mmc/host/mtk-sd.c +++ b/drivers/mmc/host/mtk-sd.c @@ -972,7 +972,7 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, if ((events & MSDC_INT_XFER_COMPL) && (!stop || !stop->error)) { data->bytes_xfered = data->blocks * data->blksz; } else { - dev_err(host->dev, "interrupt events: %x\n", events); + dev_dbg(host->dev, "interrupt events: %x\n", events); msdc_reset_hw(host); host->error |= REQ_DAT_ERR; data->bytes_xfered = 0; @@ -982,10 +982,10 @@ static bool msdc_data_xfer_done(struct msdc_host *host, u32 events, else if (events & MSDC_INT_DATCRCERR) data->error = -EILSEQ; - dev_err(host->dev, "%s: cmd=%d; blocks=%d", + dev_dbg(host->dev, "%s: cmd=%d; blocks=%d", __func__, mrq->cmd->opcode, data->blocks); - dev_err(host->dev, "data_error=%d xfer_size=%d\n", - (int)data->error, data->bytes_xfered); + dev_dbg(host->dev, "data_error=%d xfer_size=%d\n", + (int)data->error, data->bytes_xfered); } msdc_data_xfer_next(host, mrq, data); @@ -1543,7 +1543,6 @@ static int msdc_drv_probe(struct platform_device *pdev) mmc->f_min = host->src_clk_freq / (4 * 255); mmc->caps |= MMC_CAP_ERASE | MMC_CAP_CMD23; - mmc->caps |= MMC_CAP_RUNTIME_RESUME; /* MMC core transfer sizes tunable parameters */ mmc->max_segs = MAX_BD_NUM; mmc->max_seg_size = BDMA_DESC_BUFLEN; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index a448498e3af2..42296e55b9de 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -20,15 +20,12 @@ #include <linux/scatterlist.h> #include <linux/irq.h> #include <linux/clk.h> -#include <linux/gpio.h> -#include <linux/of_gpio.h> #include <linux/of_irq.h> #include <linux/mmc/host.h> #include <linux/mmc/slot-gpio.h> #include <asm/sizes.h> #include <asm/unaligned.h> -#include <linux/platform_data/mmc-mvsdio.h> #include "mvsdio.h" @@ -704,6 +701,10 @@ static int mvsd_probe(struct platform_device *pdev) struct resource *r; int ret, irq; + if (!np) { + dev_err(&pdev->dev, "no DT node\n"); + return -ENODEV; + } r = platform_get_resource(pdev, IORESOURCE_MEM, 0); irq = platform_get_irq(pdev, 0); if (!r || irq < 0) @@ -727,8 +728,12 @@ static int mvsd_probe(struct platform_device *pdev) * fixed rate clock). */ host->clk = devm_clk_get(&pdev->dev, NULL); - if (!IS_ERR(host->clk)) - clk_prepare_enable(host->clk); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "no clock associated\n"); + ret = -EINVAL; + goto out; + } + clk_prepare_enable(host->clk); mmc->ops = &mvsd_ops; @@ -744,45 +749,10 @@ static int mvsd_probe(struct platform_device *pdev) mmc->max_seg_size = mmc->max_blk_size * mmc->max_blk_count; mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; - if (np) { - if (IS_ERR(host->clk)) { - dev_err(&pdev->dev, "DT platforms must have a clock associated\n"); - ret = -EINVAL; - goto out; - } - - host->base_clock = clk_get_rate(host->clk) / 2; - ret = mmc_of_parse(mmc); - if (ret < 0) - goto out; - } else { - const struct mvsdio_platform_data *mvsd_data; - - mvsd_data = pdev->dev.platform_data; - if (!mvsd_data) { - ret = -ENXIO; - goto out; - } - mmc->caps = MMC_CAP_4_BIT_DATA | MMC_CAP_SDIO_IRQ | - MMC_CAP_SD_HIGHSPEED | MMC_CAP_MMC_HIGHSPEED; - host->base_clock = mvsd_data->clock / 2; - /* GPIO 0 regarded as invalid for backward compatibility */ - if (mvsd_data->gpio_card_detect && - gpio_is_valid(mvsd_data->gpio_card_detect)) { - ret = mmc_gpio_request_cd(mmc, - mvsd_data->gpio_card_detect, - 0); - if (ret) - goto out; - } else { - mmc->caps |= MMC_CAP_NEEDS_POLL; - } - - if (mvsd_data->gpio_write_protect && - gpio_is_valid(mvsd_data->gpio_write_protect)) - mmc_gpio_request_ro(mmc, mvsd_data->gpio_write_protect); - } - + host->base_clock = clk_get_rate(host->clk) / 2; + ret = mmc_of_parse(mmc); + if (ret < 0) + goto out; if (maxfreq) mmc->f_max = maxfreq; diff --git a/drivers/mmc/host/of_mmc_spi.c b/drivers/mmc/host/of_mmc_spi.c index 6e218fb1a669..660170cd04d9 100644 --- a/drivers/mmc/host/of_mmc_spi.c +++ b/drivers/mmc/host/of_mmc_spi.c @@ -55,8 +55,8 @@ static int of_mmc_spi_init(struct device *dev, { struct of_mmc_spi *oms = to_of_mmc_spi(dev); - return request_threaded_irq(oms->detect_irq, NULL, irqhandler, 0, - dev_name(dev), mmc); + return request_threaded_irq(oms->detect_irq, NULL, irqhandler, + IRQF_ONESHOT, dev_name(dev), mmc); } static void of_mmc_spi_exit(struct device *dev, void *mmc) diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index 7fb0753abe30..b6639ea0bf18 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -2250,10 +2250,8 @@ static int omap_hsmmc_remove(struct platform_device *pdev) pm_runtime_get_sync(host->dev); mmc_remove_host(host->mmc); - if (host->tx_chan) - dma_release_channel(host->tx_chan); - if (host->rx_chan) - dma_release_channel(host->rx_chan); + dma_release_channel(host->tx_chan); + dma_release_channel(host->rx_chan); pm_runtime_put_sync(host->dev); pm_runtime_disable(host->dev); diff --git a/drivers/mmc/host/sdhci-esdhc-imx.c b/drivers/mmc/host/sdhci-esdhc-imx.c index 1f1582f6cccb..f25f29253595 100644 --- a/drivers/mmc/host/sdhci-esdhc-imx.c +++ b/drivers/mmc/host/sdhci-esdhc-imx.c @@ -76,6 +76,7 @@ #define ESDHC_STD_TUNING_EN (1 << 24) /* NOTE: the minimum valid tuning start tap for mx6sl is 1 */ #define ESDHC_TUNING_START_TAP 0x1 +#define ESDHC_TUNING_STEP_MASK 0x00070000 #define ESDHC_TUNING_STEP_SHIFT 16 /* pinctrl state */ @@ -489,9 +490,11 @@ static void esdhc_writew_le(struct sdhci_host *host, u16 val, int reg) m |= ESDHC_MIX_CTRL_FBCLK_SEL; tuning_ctrl = readl(host->ioaddr + ESDHC_TUNING_CTRL); tuning_ctrl |= ESDHC_STD_TUNING_EN | ESDHC_TUNING_START_TAP; - if (imx_data->boarddata.tuning_step) + if (imx_data->boarddata.tuning_step) { + tuning_ctrl &= ~ESDHC_TUNING_STEP_MASK; tuning_ctrl |= imx_data->boarddata.tuning_step << ESDHC_TUNING_STEP_SHIFT; - writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); + } + writel(tuning_ctrl, host->ioaddr + ESDHC_TUNING_CTRL); } else { v &= ~ESDHC_MIX_CTRL_EXE_TUNE; } diff --git a/drivers/mmc/host/sdhci-of-at91.c b/drivers/mmc/host/sdhci-of-at91.c index 06d0b50dfe71..7e7d8f0c9438 100644 --- a/drivers/mmc/host/sdhci-of-at91.c +++ b/drivers/mmc/host/sdhci-of-at91.c @@ -21,6 +21,8 @@ #include <linux/module.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/pm.h> +#include <linux/pm_runtime.h> #include "sdhci-pltfm.h" @@ -51,6 +53,60 @@ static const struct of_device_id sdhci_at91_dt_match[] = { {} }; +#ifdef CONFIG_PM +static int sdhci_at91_runtime_suspend(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = pltfm_host->priv; + int ret; + + ret = sdhci_runtime_suspend_host(host); + + clk_disable_unprepare(priv->gck); + clk_disable_unprepare(priv->hclock); + clk_disable_unprepare(priv->mainck); + + return ret; +} + +static int sdhci_at91_runtime_resume(struct device *dev) +{ + struct sdhci_host *host = dev_get_drvdata(dev); + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_at91_priv *priv = pltfm_host->priv; + int ret; + + ret = clk_prepare_enable(priv->mainck); + if (ret) { + dev_err(dev, "can't enable mainck\n"); + return ret; + } + + ret = clk_prepare_enable(priv->hclock); + if (ret) { + dev_err(dev, "can't enable hclock\n"); + return ret; + } + + ret = clk_prepare_enable(priv->gck); + if (ret) { + dev_err(dev, "can't enable gck\n"); + return ret; + } + + return sdhci_runtime_resume_host(host); +} +#endif /* CONFIG_PM */ + +static const struct dev_pm_ops sdhci_at91_dev_pm_ops = { + SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend, + pm_runtime_force_resume) + SET_RUNTIME_PM_OPS(sdhci_at91_runtime_suspend, + sdhci_at91_runtime_resume, + NULL) +}; + static int sdhci_at91_probe(struct platform_device *pdev) { const struct of_device_id *match; @@ -144,12 +200,23 @@ static int sdhci_at91_probe(struct platform_device *pdev) sdhci_get_of_property(pdev); + pm_runtime_get_noresume(&pdev->dev); + pm_runtime_set_active(&pdev->dev); + pm_runtime_enable(&pdev->dev); + pm_runtime_set_autosuspend_delay(&pdev->dev, 50); + pm_runtime_use_autosuspend(&pdev->dev); + ret = sdhci_add_host(host); if (ret) - goto clocks_disable_unprepare; + goto pm_runtime_disable; + + pm_runtime_put_autosuspend(&pdev->dev); return 0; +pm_runtime_disable: + pm_runtime_disable(&pdev->dev); + pm_runtime_set_suspended(&pdev->dev); clocks_disable_unprepare: clk_disable_unprepare(priv->gck); clk_disable_unprepare(priv->mainck); @@ -165,6 +232,10 @@ static int sdhci_at91_remove(struct platform_device *pdev) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_at91_priv *priv = pltfm_host->priv; + pm_runtime_get_sync(&pdev->dev); + pm_runtime_disable(&pdev->dev); + pm_runtime_put_noidle(&pdev->dev); + sdhci_pltfm_unregister(pdev); clk_disable_unprepare(priv->gck); @@ -178,7 +249,7 @@ static struct platform_driver sdhci_at91_driver = { .driver = { .name = "sdhci-at91", .of_match_table = sdhci_at91_dt_match, - .pm = SDHCI_PLTFM_PMOPS, + .pm = &sdhci_at91_dev_pm_ops, }, .probe = sdhci_at91_probe, .remove = sdhci_at91_remove, diff --git a/drivers/mmc/host/sdhci-of-esdhc.c b/drivers/mmc/host/sdhci-of-esdhc.c index 90e94a028a49..83b1226471c1 100644 --- a/drivers/mmc/host/sdhci-of-esdhc.c +++ b/drivers/mmc/host/sdhci-of-esdhc.c @@ -584,6 +584,8 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) { struct sdhci_host *host; struct device_node *np; + struct sdhci_pltfm_host *pltfm_host; + struct sdhci_esdhc *esdhc; int ret; np = pdev->dev.of_node; @@ -600,6 +602,14 @@ static int sdhci_esdhc_probe(struct platform_device *pdev) sdhci_get_of_property(pdev); + pltfm_host = sdhci_priv(host); + esdhc = pltfm_host->priv; + if (esdhc->vendor_ver == VENDOR_V_22) + host->quirks2 |= SDHCI_QUIRK2_HOST_NO_CMD23; + + if (esdhc->vendor_ver > VENDOR_V_22) + host->quirks &= ~SDHCI_QUIRK_NO_BUSY_IRQ; + if (of_device_is_compatible(np, "fsl,p5040-esdhc") || of_device_is_compatible(np, "fsl,p5020-esdhc") || of_device_is_compatible(np, "fsl,p4080-esdhc") || diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c index cf7ad458b4f4..cc851b065d0a 100644 --- a/drivers/mmc/host/sdhci-pci-core.c +++ b/drivers/mmc/host/sdhci-pci-core.c @@ -277,7 +277,7 @@ static int spt_select_drive_strength(struct sdhci_host *host, if (sdhci_pci_spt_drive_strength > 0) drive_strength = sdhci_pci_spt_drive_strength & 0xf; else - drive_strength = 1; /* 33-ohm */ + drive_strength = 0; /* Default 50-ohm */ if ((mmc_driver_type_mask(drive_strength) & card_drv) == 0) drive_strength = 0; /* Default 50-ohm */ @@ -1464,7 +1464,7 @@ static int sdhci_pci_resume(struct device *dev) static int sdhci_pci_runtime_suspend(struct device *dev) { - struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; int i, ret; @@ -1500,7 +1500,7 @@ err_pci_runtime_suspend: static int sdhci_pci_runtime_resume(struct device *dev) { - struct pci_dev *pdev = container_of(dev, struct pci_dev, dev); + struct pci_dev *pdev = to_pci_dev(dev); struct sdhci_pci_chip *chip; struct sdhci_pci_slot *slot; int i, ret; diff --git a/drivers/mmc/host/sdhci-pltfm.c b/drivers/mmc/host/sdhci-pltfm.c index 87fb5ea8ebe7..072bb27a65cf 100644 --- a/drivers/mmc/host/sdhci-pltfm.c +++ b/drivers/mmc/host/sdhci-pltfm.c @@ -104,7 +104,8 @@ void sdhci_get_of_property(struct platform_device *pdev) if (of_find_property(np, "keep-power-in-suspend", NULL)) host->mmc->pm_caps |= MMC_PM_KEEP_POWER; - if (of_find_property(np, "enable-sdio-wakeup", NULL)) + if (of_property_read_bool(np, "wakeup-source") || + of_property_read_bool(np, "enable-sdio-wakeup")) /* legacy */ host->mmc->pm_caps |= MMC_PM_WAKE_SDIO_IRQ; } #else diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index ad28b49f0203..83c4bf7bc16c 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -22,12 +22,20 @@ #include <linux/of_device.h> #include <linux/mmc/card.h> #include <linux/mmc/host.h> +#include <linux/mmc/mmc.h> #include <linux/mmc/slot-gpio.h> #include <linux/gpio/consumer.h> #include "sdhci-pltfm.h" /* Tegra SDHOST controller vendor register definitions */ +#define SDHCI_TEGRA_VENDOR_CLOCK_CTRL 0x100 +#define SDHCI_CLOCK_CTRL_TAP_MASK 0x00ff0000 +#define SDHCI_CLOCK_CTRL_TAP_SHIFT 16 +#define SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE BIT(5) +#define SDHCI_CLOCK_CTRL_PADPIPE_CLKEN_OVERRIDE BIT(3) +#define SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE BIT(2) + #define SDHCI_TEGRA_VENDOR_MISC_CTRL 0x120 #define SDHCI_MISC_CTRL_ENABLE_SDR104 0x8 #define SDHCI_MISC_CTRL_ENABLE_SDR50 0x10 @@ -37,9 +45,9 @@ #define NVQUIRK_FORCE_SDHCI_SPEC_200 BIT(0) #define NVQUIRK_ENABLE_BLOCK_GAP_DET BIT(1) #define NVQUIRK_ENABLE_SDHCI_SPEC_300 BIT(2) -#define NVQUIRK_DISABLE_SDR50 BIT(3) -#define NVQUIRK_DISABLE_SDR104 BIT(4) -#define NVQUIRK_DISABLE_DDR50 BIT(5) +#define NVQUIRK_ENABLE_SDR50 BIT(3) +#define NVQUIRK_ENABLE_SDR104 BIT(4) +#define NVQUIRK_ENABLE_DDR50 BIT(5) struct sdhci_tegra_soc_data { const struct sdhci_pltfm_data *pdata; @@ -49,6 +57,7 @@ struct sdhci_tegra_soc_data { struct sdhci_tegra { const struct sdhci_tegra_soc_data *soc_data; struct gpio_desc *power_gpio; + bool ddr_signaling; }; static u16 tegra_sdhci_readw(struct sdhci_host *host, int reg) @@ -124,25 +133,33 @@ static void tegra_sdhci_reset(struct sdhci_host *host, u8 mask) struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); struct sdhci_tegra *tegra_host = pltfm_host->priv; const struct sdhci_tegra_soc_data *soc_data = tegra_host->soc_data; - u32 misc_ctrl; + u32 misc_ctrl, clk_ctrl; sdhci_reset(host, mask); if (!(mask & SDHCI_RESET_ALL)) return; - misc_ctrl = sdhci_readw(host, SDHCI_TEGRA_VENDOR_MISC_CTRL); + misc_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_MISC_CTRL); /* Erratum: Enable SDHCI spec v3.00 support */ if (soc_data->nvquirks & NVQUIRK_ENABLE_SDHCI_SPEC_300) misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDHCI_SPEC_300; - /* Don't advertise UHS modes which aren't supported yet */ - if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR50) - misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR50; - if (soc_data->nvquirks & NVQUIRK_DISABLE_DDR50) - misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_DDR50; - if (soc_data->nvquirks & NVQUIRK_DISABLE_SDR104) - misc_ctrl &= ~SDHCI_MISC_CTRL_ENABLE_SDR104; - sdhci_writew(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL); + /* Advertise UHS modes as supported by host */ + if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR50) + misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR50; + if (soc_data->nvquirks & NVQUIRK_ENABLE_DDR50) + misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_DDR50; + if (soc_data->nvquirks & NVQUIRK_ENABLE_SDR104) + misc_ctrl |= SDHCI_MISC_CTRL_ENABLE_SDR104; + sdhci_writel(host, misc_ctrl, SDHCI_TEGRA_VENDOR_MISC_CTRL); + + clk_ctrl = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL); + clk_ctrl &= ~SDHCI_CLOCK_CTRL_SPI_MODE_CLKEN_OVERRIDE; + if (soc_data->nvquirks & SDHCI_MISC_CTRL_ENABLE_SDR50) + clk_ctrl |= SDHCI_CLOCK_CTRL_SDR50_TUNING_OVERRIDE; + sdhci_writel(host, clk_ctrl, SDHCI_TEGRA_VENDOR_CLOCK_CTRL); + + tegra_host->ddr_signaling = false; } static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width) @@ -164,15 +181,99 @@ static void tegra_sdhci_set_bus_width(struct sdhci_host *host, int bus_width) sdhci_writeb(host, ctrl, SDHCI_HOST_CONTROL); } +static void tegra_sdhci_set_clock(struct sdhci_host *host, unsigned int clock) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + unsigned long host_clk; + + if (!clock) + return; + + host_clk = tegra_host->ddr_signaling ? clock * 2 : clock; + clk_set_rate(pltfm_host->clk, host_clk); + host->max_clk = clk_get_rate(pltfm_host->clk); + + return sdhci_set_clock(host, clock); +} + +static void tegra_sdhci_set_uhs_signaling(struct sdhci_host *host, + unsigned timing) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + struct sdhci_tegra *tegra_host = pltfm_host->priv; + + if (timing == MMC_TIMING_UHS_DDR50) + tegra_host->ddr_signaling = true; + + return sdhci_set_uhs_signaling(host, timing); +} + +static unsigned int tegra_sdhci_get_max_clock(struct sdhci_host *host) +{ + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); + + /* + * DDR modes require the host to run at double the card frequency, so + * the maximum rate we can support is half of the module input clock. + */ + return clk_round_rate(pltfm_host->clk, UINT_MAX) / 2; +} + +static void tegra_sdhci_set_tap(struct sdhci_host *host, unsigned int tap) +{ + u32 reg; + + reg = sdhci_readl(host, SDHCI_TEGRA_VENDOR_CLOCK_CTRL); + reg &= ~SDHCI_CLOCK_CTRL_TAP_MASK; + reg |= tap << SDHCI_CLOCK_CTRL_TAP_SHIFT; + sdhci_writel(host, reg, SDHCI_TEGRA_VENDOR_CLOCK_CTRL); +} + +static int tegra_sdhci_execute_tuning(struct sdhci_host *host, u32 opcode) +{ + unsigned int min, max; + + /* + * Start search for minimum tap value at 10, as smaller values are + * may wrongly be reported as working but fail at higher speeds, + * according to the TRM. + */ + min = 10; + while (min < 255) { + tegra_sdhci_set_tap(host, min); + if (!mmc_send_tuning(host->mmc, opcode, NULL)) + break; + min++; + } + + /* Find the maximum tap value that still passes. */ + max = min + 1; + while (max < 255) { + tegra_sdhci_set_tap(host, max); + if (mmc_send_tuning(host->mmc, opcode, NULL)) { + max--; + break; + } + max++; + } + + /* The TRM states the ideal tap value is at 75% in the passing range. */ + tegra_sdhci_set_tap(host, min + ((max - min) * 3 / 4)); + + return mmc_send_tuning(host->mmc, opcode, NULL); +} + static const struct sdhci_ops tegra_sdhci_ops = { .get_ro = tegra_sdhci_get_ro, .read_w = tegra_sdhci_readw, .write_l = tegra_sdhci_writel, - .set_clock = sdhci_set_clock, + .set_clock = tegra_sdhci_set_clock, .set_bus_width = tegra_sdhci_set_bus_width, .reset = tegra_sdhci_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, - .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .platform_execute_tuning = tegra_sdhci_execute_tuning, + .set_uhs_signaling = tegra_sdhci_set_uhs_signaling, + .get_max_clock = tegra_sdhci_get_max_clock, }; static const struct sdhci_pltfm_data sdhci_tegra20_pdata = { @@ -184,7 +285,7 @@ static const struct sdhci_pltfm_data sdhci_tegra20_pdata = { .ops = &tegra_sdhci_ops, }; -static struct sdhci_tegra_soc_data soc_data_tegra20 = { +static const struct sdhci_tegra_soc_data soc_data_tegra20 = { .pdata = &sdhci_tegra20_pdata, .nvquirks = NVQUIRK_FORCE_SDHCI_SPEC_200 | NVQUIRK_ENABLE_BLOCK_GAP_DET, @@ -197,14 +298,15 @@ static const struct sdhci_pltfm_data sdhci_tegra30_pdata = { SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, .ops = &tegra_sdhci_ops, }; -static struct sdhci_tegra_soc_data soc_data_tegra30 = { +static const struct sdhci_tegra_soc_data soc_data_tegra30 = { .pdata = &sdhci_tegra30_pdata, .nvquirks = NVQUIRK_ENABLE_SDHCI_SPEC_300 | - NVQUIRK_DISABLE_SDR50 | - NVQUIRK_DISABLE_SDR104, + NVQUIRK_ENABLE_SDR50 | + NVQUIRK_ENABLE_SDR104, }; static const struct sdhci_ops tegra114_sdhci_ops = { @@ -212,11 +314,12 @@ static const struct sdhci_ops tegra114_sdhci_ops = { .read_w = tegra_sdhci_readw, .write_w = tegra_sdhci_writew, .write_l = tegra_sdhci_writel, - .set_clock = sdhci_set_clock, + .set_clock = tegra_sdhci_set_clock, .set_bus_width = tegra_sdhci_set_bus_width, .reset = tegra_sdhci_reset, - .set_uhs_signaling = sdhci_set_uhs_signaling, - .get_max_clock = sdhci_pltfm_clk_get_max_clock, + .platform_execute_tuning = tegra_sdhci_execute_tuning, + .set_uhs_signaling = tegra_sdhci_set_uhs_signaling, + .get_max_clock = tegra_sdhci_get_max_clock, }; static const struct sdhci_pltfm_data sdhci_tegra114_pdata = { @@ -226,17 +329,34 @@ static const struct sdhci_pltfm_data sdhci_tegra114_pdata = { SDHCI_QUIRK_NO_HISPD_BIT | SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, .ops = &tegra114_sdhci_ops, }; -static struct sdhci_tegra_soc_data soc_data_tegra114 = { +static const struct sdhci_tegra_soc_data soc_data_tegra114 = { .pdata = &sdhci_tegra114_pdata, - .nvquirks = NVQUIRK_DISABLE_SDR50 | - NVQUIRK_DISABLE_DDR50 | - NVQUIRK_DISABLE_SDR104, + .nvquirks = NVQUIRK_ENABLE_SDR50 | + NVQUIRK_ENABLE_DDR50 | + NVQUIRK_ENABLE_SDR104, +}; + +static const struct sdhci_pltfm_data sdhci_tegra210_pdata = { + .quirks = SDHCI_QUIRK_BROKEN_TIMEOUT_VAL | + SDHCI_QUIRK_DATA_TIMEOUT_USES_SDCLK | + SDHCI_QUIRK_SINGLE_POWER_WRITE | + SDHCI_QUIRK_NO_HISPD_BIT | + SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC | + SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN, + .quirks2 = SDHCI_QUIRK2_PRESET_VALUE_BROKEN, + .ops = &tegra114_sdhci_ops, +}; + +static const struct sdhci_tegra_soc_data soc_data_tegra210 = { + .pdata = &sdhci_tegra210_pdata, }; static const struct of_device_id sdhci_tegra_dt_match[] = { + { .compatible = "nvidia,tegra210-sdhci", .data = &soc_data_tegra210 }, { .compatible = "nvidia,tegra124-sdhci", .data = &soc_data_tegra114 }, { .compatible = "nvidia,tegra114-sdhci", .data = &soc_data_tegra114 }, { .compatible = "nvidia,tegra30-sdhci", .data = &soc_data_tegra30 }, @@ -271,6 +391,7 @@ static int sdhci_tegra_probe(struct platform_device *pdev) rc = -ENOMEM; goto err_alloc_tegra_host; } + tegra_host->ddr_signaling = false; tegra_host->soc_data = soc_data; pltfm_host->priv = tegra_host; @@ -278,6 +399,9 @@ static int sdhci_tegra_probe(struct platform_device *pdev) if (rc) goto err_parse_dt; + if (tegra_host->soc_data->nvquirks & NVQUIRK_ENABLE_DDR50) + host->mmc->caps |= MMC_CAP_1_8V_DDR; + tegra_host->power_gpio = devm_gpiod_get_optional(&pdev->dev, "power", GPIOD_OUT_HIGH); if (IS_ERR(tegra_host->power_gpio)) { diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index b48565ed5616..d622435d1bcc 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -492,7 +492,7 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, host->align_buffer, host->align_buffer_sz, direction); if (dma_mapping_error(mmc_dev(host->mmc), host->align_addr)) goto fail; - BUG_ON(host->align_addr & host->align_mask); + BUG_ON(host->align_addr & SDHCI_ADMA2_MASK); host->sg_count = sdhci_pre_dma_transfer(host, data); if (host->sg_count < 0) @@ -514,8 +514,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, * the (up to three) bytes that screw up the * alignment. */ - offset = (host->align_sz - (addr & host->align_mask)) & - host->align_mask; + offset = (SDHCI_ADMA2_ALIGN - (addr & SDHCI_ADMA2_MASK)) & + SDHCI_ADMA2_MASK; if (offset) { if (data->flags & MMC_DATA_WRITE) { buffer = sdhci_kmap_atomic(sg, &flags); @@ -529,8 +529,8 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, BUG_ON(offset > 65536); - align += host->align_sz; - align_addr += host->align_sz; + align += SDHCI_ADMA2_ALIGN; + align_addr += SDHCI_ADMA2_ALIGN; desc += host->desc_sz; @@ -540,9 +540,12 @@ static int sdhci_adma_table_pre(struct sdhci_host *host, BUG_ON(len > 65536); - /* tran, valid */ - sdhci_adma_write_desc(host, desc, addr, len, ADMA2_TRAN_VALID); - desc += host->desc_sz; + if (len) { + /* tran, valid */ + sdhci_adma_write_desc(host, desc, addr, len, + ADMA2_TRAN_VALID); + desc += host->desc_sz; + } /* * If this triggers then we have a calculation bug @@ -608,7 +611,7 @@ static void sdhci_adma_table_post(struct sdhci_host *host, /* Do a quick scan of the SG list for any unaligned mappings */ has_unaligned = false; for_each_sg(data->sg, sg, host->sg_count, i) - if (sg_dma_address(sg) & host->align_mask) { + if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) { has_unaligned = true; break; } @@ -620,15 +623,15 @@ static void sdhci_adma_table_post(struct sdhci_host *host, align = host->align_buffer; for_each_sg(data->sg, sg, host->sg_count, i) { - if (sg_dma_address(sg) & host->align_mask) { - size = host->align_sz - - (sg_dma_address(sg) & host->align_mask); + if (sg_dma_address(sg) & SDHCI_ADMA2_MASK) { + size = SDHCI_ADMA2_ALIGN - + (sg_dma_address(sg) & SDHCI_ADMA2_MASK); buffer = sdhci_kmap_atomic(sg, &flags); memcpy(buffer, align, size); sdhci_kunmap_atomic(buffer, &flags); - align += host->align_sz; + align += SDHCI_ADMA2_ALIGN; } } } @@ -768,8 +771,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) if (unlikely(broken)) { for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->length & 0x3) { - DBG("Reverting to PIO because of " - "transfer size (%d)\n", + DBG("Reverting to PIO because of transfer size (%d)\n", sg->length); host->flags &= ~SDHCI_REQ_USE_DMA; break; @@ -803,8 +805,7 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_command *cmd) if (unlikely(broken)) { for_each_sg(data->sg, sg, data->sg_len, i) { if (sg->offset & 0x3) { - DBG("Reverting to PIO because of " - "bad alignment\n"); + DBG("Reverting to PIO because of bad alignment\n"); host->flags &= ~SDHCI_REQ_USE_DMA; break; } @@ -1016,8 +1017,8 @@ void sdhci_send_command(struct sdhci_host *host, struct mmc_command *cmd) while (sdhci_readl(host, SDHCI_PRESENT_STATE) & mask) { if (timeout == 0) { - pr_err("%s: Controller never released " - "inhibit bit(s).\n", mmc_hostname(host->mmc)); + pr_err("%s: Controller never released inhibit bit(s).\n", + mmc_hostname(host->mmc)); sdhci_dumpregs(host); cmd->error = -EIO; tasklet_schedule(&host->finish_tasklet); @@ -1254,8 +1255,8 @@ clock_set: while (!((clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL)) & SDHCI_CLOCK_INT_STABLE)) { if (timeout == 0) { - pr_err("%s: Internal clock never " - "stabilised.\n", mmc_hostname(host->mmc)); + pr_err("%s: Internal clock never stabilised.\n", + mmc_hostname(host->mmc)); sdhci_dumpregs(host); return; } @@ -1274,19 +1275,6 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, struct mmc_host *mmc = host->mmc; u8 pwr = 0; - if (!IS_ERR(mmc->supply.vmmc)) { - spin_unlock_irq(&host->lock); - mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); - spin_lock_irq(&host->lock); - - if (mode != MMC_POWER_OFF) - sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL); - else - sdhci_writeb(host, 0, SDHCI_POWER_CONTROL); - - return; - } - if (mode != MMC_POWER_OFF) { switch (1 << vdd) { case MMC_VDD_165_195: @@ -1301,7 +1289,9 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, pwr = SDHCI_POWER_330; break; default: - BUG(); + WARN(1, "%s: Invalid vdd %#x\n", + mmc_hostname(host->mmc), vdd); + break; } } @@ -1345,6 +1335,12 @@ static void sdhci_set_power(struct sdhci_host *host, unsigned char mode, if (host->quirks & SDHCI_QUIRK_DELAY_AFTER_POWER) mdelay(10); } + + if (!IS_ERR(mmc->supply.vmmc)) { + spin_unlock_irq(&host->lock); + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd); + spin_lock_irq(&host->lock); + } } /*****************************************************************************\ @@ -1540,8 +1536,8 @@ static void sdhci_do_set_ios(struct sdhci_host *host, struct mmc_ios *ios) else if (ios->drv_type == MMC_SET_DRIVER_TYPE_D) ctrl_2 |= SDHCI_CTRL_DRV_TYPE_D; else { - pr_warn("%s: invalid driver type, default to " - "driver type B\n", mmc_hostname(mmc)); + pr_warn("%s: invalid driver type, default to driver type B\n", + mmc_hostname(mmc)); ctrl_2 |= SDHCI_CTRL_DRV_TYPE_B; } @@ -2015,10 +2011,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) spin_lock_irqsave(&host->lock, flags); if (!host->tuning_done) { - pr_info(DRIVER_NAME ": Timeout waiting for " - "Buffer Read Ready interrupt during tuning " - "procedure, falling back to fixed sampling " - "clock\n"); + pr_info(DRIVER_NAME ": Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock\n"); ctrl = sdhci_readw(host, SDHCI_HOST_CONTROL2); ctrl &= ~SDHCI_CTRL_TUNED_CLK; ctrl &= ~SDHCI_CTRL_EXEC_TUNING; @@ -2046,9 +2039,7 @@ static int sdhci_execute_tuning(struct mmc_host *mmc, u32 opcode) sdhci_writew(host, ctrl, SDHCI_HOST_CONTROL2); } if (!(ctrl & SDHCI_CTRL_TUNED_CLK)) { - pr_info(DRIVER_NAME ": Tuning procedure" - " failed, falling back to fixed sampling" - " clock\n"); + pr_info(DRIVER_NAME ": Tuning procedure failed, falling back to fixed sampling clock\n"); err = -EIO; } @@ -2293,8 +2284,8 @@ static void sdhci_timeout_timer(unsigned long data) spin_lock_irqsave(&host->lock, flags); if (host->mrq) { - pr_err("%s: Timeout waiting for hardware " - "interrupt.\n", mmc_hostname(host->mmc)); + pr_err("%s: Timeout waiting for hardware interrupt.\n", + mmc_hostname(host->mmc)); sdhci_dumpregs(host); if (host->data) { @@ -2325,9 +2316,8 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask) BUG_ON(intmask == 0); if (!host->cmd) { - pr_err("%s: Got command interrupt 0x%08x even " - "though no command operation was in progress.\n", - mmc_hostname(host->mmc), (unsigned)intmask); + pr_err("%s: Got command interrupt 0x%08x even though no command operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); sdhci_dumpregs(host); return; } @@ -2356,8 +2346,7 @@ static void sdhci_cmd_irq(struct sdhci_host *host, u32 intmask, u32 *mask) */ if (host->cmd->flags & MMC_RSP_BUSY) { if (host->cmd->data) - DBG("Cannot wait for busy signal when also " - "doing a data transfer"); + DBG("Cannot wait for busy signal when also doing a data transfer"); else if (!(host->quirks & SDHCI_QUIRK_NO_BUSY_IRQ) && !host->busy_handle) { /* Mark that command complete before busy is ended */ @@ -2451,9 +2440,8 @@ static void sdhci_data_irq(struct sdhci_host *host, u32 intmask) } } - pr_err("%s: Got data interrupt 0x%08x even " - "though no data operation was in progress.\n", - mmc_hostname(host->mmc), (unsigned)intmask); + pr_err("%s: Got data interrupt 0x%08x even though no data operation was in progress.\n", + mmc_hostname(host->mmc), (unsigned)intmask); sdhci_dumpregs(host); return; @@ -2760,7 +2748,7 @@ static int sdhci_runtime_pm_put(struct sdhci_host *host) static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) { - if (host->runtime_suspended || host->bus_on) + if (host->bus_on) return; host->bus_on = true; pm_runtime_get_noresume(host->mmc->parent); @@ -2768,7 +2756,7 @@ static void sdhci_runtime_pm_bus_on(struct sdhci_host *host) static void sdhci_runtime_pm_bus_off(struct sdhci_host *host) { - if (host->runtime_suspended || !host->bus_on) + if (!host->bus_on) return; host->bus_on = false; pm_runtime_put_noidle(host->mmc->parent); @@ -2896,9 +2884,8 @@ int sdhci_add_host(struct sdhci_host *host) host->version = (host->version & SDHCI_SPEC_VER_MASK) >> SDHCI_SPEC_VER_SHIFT; if (host->version > SDHCI_SPEC_300) { - pr_err("%s: Unknown controller version (%d). " - "You may experience problems.\n", mmc_hostname(mmc), - host->version); + pr_err("%s: Unknown controller version (%d). You may experience problems.\n", + mmc_hostname(mmc), host->version); } caps[0] = (host->quirks & SDHCI_QUIRK_MISSING_CAPS) ? host->caps : @@ -2967,24 +2954,17 @@ int sdhci_add_host(struct sdhci_host *host) if (host->flags & SDHCI_USE_64_BIT_DMA) { host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) * SDHCI_ADMA2_64_DESC_SZ; - host->align_buffer_sz = SDHCI_MAX_SEGS * - SDHCI_ADMA2_64_ALIGN; host->desc_sz = SDHCI_ADMA2_64_DESC_SZ; - host->align_sz = SDHCI_ADMA2_64_ALIGN; - host->align_mask = SDHCI_ADMA2_64_ALIGN - 1; } else { host->adma_table_sz = (SDHCI_MAX_SEGS * 2 + 1) * SDHCI_ADMA2_32_DESC_SZ; - host->align_buffer_sz = SDHCI_MAX_SEGS * - SDHCI_ADMA2_32_ALIGN; host->desc_sz = SDHCI_ADMA2_32_DESC_SZ; - host->align_sz = SDHCI_ADMA2_32_ALIGN; - host->align_mask = SDHCI_ADMA2_32_ALIGN - 1; } host->adma_table = dma_alloc_coherent(mmc_dev(mmc), host->adma_table_sz, &host->adma_addr, GFP_KERNEL); + host->align_buffer_sz = SDHCI_MAX_SEGS * SDHCI_ADMA2_ALIGN; host->align_buffer = kmalloc(host->align_buffer_sz, GFP_KERNEL); if (!host->adma_table || !host->align_buffer) { if (host->adma_table) @@ -2998,7 +2978,7 @@ int sdhci_add_host(struct sdhci_host *host) host->flags &= ~SDHCI_USE_ADMA; host->adma_table = NULL; host->align_buffer = NULL; - } else if (host->adma_addr & host->align_mask) { + } else if (host->adma_addr & (SDHCI_ADMA2_DESC_ALIGN - 1)) { pr_warn("%s: unable to allocate aligned ADMA descriptor\n", mmc_hostname(mmc)); host->flags &= ~SDHCI_USE_ADMA; @@ -3031,8 +3011,8 @@ int sdhci_add_host(struct sdhci_host *host) if (host->max_clk == 0 || host->quirks & SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN) { if (!host->ops->get_max_clock) { - pr_err("%s: Hardware doesn't specify base clock " - "frequency.\n", mmc_hostname(mmc)); + pr_err("%s: Hardware doesn't specify base clock frequency.\n", + mmc_hostname(mmc)); return -ENODEV; } host->max_clk = host->ops->get_max_clock(host); @@ -3294,8 +3274,8 @@ int sdhci_add_host(struct sdhci_host *host) mmc->ocr_avail_mmc &= host->ocr_avail_mmc; if (mmc->ocr_avail == 0) { - pr_err("%s: Hardware doesn't report any " - "support voltages.\n", mmc_hostname(mmc)); + pr_err("%s: Hardware doesn't report any support voltages.\n", + mmc_hostname(mmc)); return -ENODEV; } diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index 9d4aa31b683a..7654ae5d2b4e 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -272,22 +272,27 @@ /* ADMA2 32-bit DMA descriptor size */ #define SDHCI_ADMA2_32_DESC_SZ 8 -/* ADMA2 32-bit DMA alignment */ -#define SDHCI_ADMA2_32_ALIGN 4 - /* ADMA2 32-bit descriptor */ struct sdhci_adma2_32_desc { __le16 cmd; __le16 len; __le32 addr; -} __packed __aligned(SDHCI_ADMA2_32_ALIGN); +} __packed __aligned(4); + +/* ADMA2 data alignment */ +#define SDHCI_ADMA2_ALIGN 4 +#define SDHCI_ADMA2_MASK (SDHCI_ADMA2_ALIGN - 1) + +/* + * ADMA2 descriptor alignment. Some controllers (e.g. Intel) require 8 byte + * alignment for the descriptor table even in 32-bit DMA mode. Memory + * allocation is at least 8 byte aligned anyway, so just stipulate 8 always. + */ +#define SDHCI_ADMA2_DESC_ALIGN 8 /* ADMA2 64-bit DMA descriptor size */ #define SDHCI_ADMA2_64_DESC_SZ 12 -/* ADMA2 64-bit DMA alignment */ -#define SDHCI_ADMA2_64_ALIGN 8 - /* * ADMA2 64-bit descriptor. Note 12-byte descriptor can't always be 8-byte * aligned. @@ -482,8 +487,6 @@ struct sdhci_host { dma_addr_t align_addr; /* Mapped bounce buffer */ unsigned int desc_sz; /* ADMA descriptor size */ - unsigned int align_sz; /* ADMA alignment */ - unsigned int align_mask; /* ADMA alignment mask */ struct tasklet_struct finish_tasklet; /* Tasklet structures */ diff --git a/drivers/mmc/host/sh_mmcif.c b/drivers/mmc/host/sh_mmcif.c index ad9ffea7d659..1ca8a1359cbc 100644 --- a/drivers/mmc/host/sh_mmcif.c +++ b/drivers/mmc/host/sh_mmcif.c @@ -397,38 +397,26 @@ static void sh_mmcif_start_dma_tx(struct sh_mmcif_host *host) } static struct dma_chan * -sh_mmcif_request_dma_one(struct sh_mmcif_host *host, - struct sh_mmcif_plat_data *pdata, - enum dma_transfer_direction direction) +sh_mmcif_request_dma_pdata(struct sh_mmcif_host *host, uintptr_t slave_id) { - struct dma_slave_config cfg = { 0, }; - struct dma_chan *chan; - void *slave_data = NULL; - struct resource *res; - struct device *dev = sh_mmcif_host_to_dev(host); dma_cap_mask_t mask; - int ret; dma_cap_zero(mask); dma_cap_set(DMA_SLAVE, mask); + if (slave_id <= 0) + return NULL; - if (pdata) - slave_data = direction == DMA_MEM_TO_DEV ? - (void *)pdata->slave_id_tx : - (void *)pdata->slave_id_rx; - - chan = dma_request_slave_channel_compat(mask, shdma_chan_filter, - slave_data, dev, - direction == DMA_MEM_TO_DEV ? "tx" : "rx"); - - dev_dbg(dev, "%s: %s: got channel %p\n", __func__, - direction == DMA_MEM_TO_DEV ? "TX" : "RX", chan); + return dma_request_channel(mask, shdma_chan_filter, (void *)slave_id); +} - if (!chan) - return NULL; +static int sh_mmcif_dma_slave_config(struct sh_mmcif_host *host, + struct dma_chan *chan, + enum dma_transfer_direction direction) +{ + struct resource *res; + struct dma_slave_config cfg = { 0, }; res = platform_get_resource(host->pd, IORESOURCE_MEM, 0); - cfg.direction = direction; if (direction == DMA_DEV_TO_MEM) { @@ -439,38 +427,42 @@ sh_mmcif_request_dma_one(struct sh_mmcif_host *host, cfg.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; } - ret = dmaengine_slave_config(chan, &cfg); - if (ret < 0) { - dma_release_channel(chan); - return NULL; - } - - return chan; + return dmaengine_slave_config(chan, &cfg); } -static void sh_mmcif_request_dma(struct sh_mmcif_host *host, - struct sh_mmcif_plat_data *pdata) +static void sh_mmcif_request_dma(struct sh_mmcif_host *host) { struct device *dev = sh_mmcif_host_to_dev(host); host->dma_active = false; - if (pdata) { - if (pdata->slave_id_tx <= 0 || pdata->slave_id_rx <= 0) - return; - } else if (!dev->of_node) { - return; + /* We can only either use DMA for both Tx and Rx or not use it at all */ + if (IS_ENABLED(CONFIG_SUPERH) && dev->platform_data) { + struct sh_mmcif_plat_data *pdata = dev->platform_data; + + host->chan_tx = sh_mmcif_request_dma_pdata(host, + pdata->slave_id_tx); + host->chan_rx = sh_mmcif_request_dma_pdata(host, + pdata->slave_id_rx); + } else { + host->chan_tx = dma_request_slave_channel(dev, "tx"); + host->chan_tx = dma_request_slave_channel(dev, "rx"); } + dev_dbg(dev, "%s: got channel TX %p RX %p\n", __func__, host->chan_tx, + host->chan_rx); - /* We can only either use DMA for both Tx and Rx or not use it at all */ - host->chan_tx = sh_mmcif_request_dma_one(host, pdata, DMA_MEM_TO_DEV); - if (!host->chan_tx) - return; + if (!host->chan_tx || !host->chan_rx || + sh_mmcif_dma_slave_config(host, host->chan_tx, DMA_MEM_TO_DEV) || + sh_mmcif_dma_slave_config(host, host->chan_rx, DMA_DEV_TO_MEM)) + goto error; - host->chan_rx = sh_mmcif_request_dma_one(host, pdata, DMA_DEV_TO_MEM); - if (!host->chan_rx) { + return; + +error: + if (host->chan_tx) dma_release_channel(host->chan_tx); - host->chan_tx = NULL; - } + if (host->chan_rx) + dma_release_channel(host->chan_rx); + host->chan_tx = host->chan_rx = NULL; } static void sh_mmcif_release_dma(struct sh_mmcif_host *host) @@ -1102,7 +1094,7 @@ static void sh_mmcif_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->power_mode == MMC_POWER_UP) { if (!host->card_present) { /* See if we also get DMA */ - sh_mmcif_request_dma(host, dev->platform_data); + sh_mmcif_request_dma(host); host->card_present = true; } sh_mmcif_set_power(host, ios); diff --git a/drivers/mmc/host/usdhi6rol0.c b/drivers/mmc/host/usdhi6rol0.c index 4498e92116b8..b47122d3e8d8 100644 --- a/drivers/mmc/host/usdhi6rol0.c +++ b/drivers/mmc/host/usdhi6rol0.c @@ -1634,7 +1634,7 @@ static void usdhi6_timeout_work(struct work_struct *work) struct usdhi6_host *host = container_of(d, struct usdhi6_host, timeout_work); struct mmc_request *mrq = host->mrq; struct mmc_data *data = mrq ? mrq->data : NULL; - struct scatterlist *sg = host->sg ?: data->sg; + struct scatterlist *sg; dev_warn(mmc_dev(host->mmc), "%s timeout wait %u CMD%d: IRQ 0x%08x:0x%08x, last IRQ 0x%08x\n", @@ -1666,6 +1666,7 @@ static void usdhi6_timeout_work(struct work_struct *work) case USDHI6_WAIT_FOR_MWRITE: case USDHI6_WAIT_FOR_READ: case USDHI6_WAIT_FOR_WRITE: + sg = host->sg ?: data->sg; dev_dbg(mmc_dev(host->mmc), "%c: page #%u @ +0x%zx %ux%u in SG%u. Current SG %u bytes @ %u\n", data->flags & MMC_DATA_READ ? 'R' : 'W', host->page_idx, |