btrfs: use btrfs_get_dev_args_from_path in dev removal ioctls

For device removal and replace we call btrfs_find_device_by_devspec,
which if we give it a device path and nothing else will call
btrfs_get_dev_args_from_path, which opens the block device and reads the
super block and then looks up our device based on that.

However at this point we're holding the sb write "lock", so reading the
block device pulls in the dependency of ->open_mutex, which produces the
following lockdep splat

======================================================
WARNING: possible circular locking dependency detected
5.14.0-rc2+ #405 Not tainted
------------------------------------------------------
losetup/11576 is trying to acquire lock:
ffff9bbe8cded938 ((wq_completion)loop0){+.+.}-{0:0}, at: flush_workqueue+0x67/0x5e0

but task is already holding lock:
ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #4 (&lo->lo_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7d/0x750
       lo_open+0x28/0x60 [loop]
       blkdev_get_whole+0x25/0xf0
       blkdev_get_by_dev.part.0+0x168/0x3c0
       blkdev_open+0xd2/0xe0
       do_dentry_open+0x161/0x390
       path_openat+0x3cc/0xa20
       do_filp_open+0x96/0x120
       do_sys_openat2+0x7b/0x130
       __x64_sys_openat+0x46/0x70
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #3 (&disk->open_mutex){+.+.}-{3:3}:
       __mutex_lock+0x7d/0x750
       blkdev_get_by_dev.part.0+0x56/0x3c0
       blkdev_get_by_path+0x98/0xa0
       btrfs_get_bdev_and_sb+0x1b/0xb0
       btrfs_find_device_by_devspec+0x12b/0x1c0
       btrfs_rm_device+0x127/0x610
       btrfs_ioctl+0x2a31/0x2e70
       __x64_sys_ioctl+0x80/0xb0
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

-> #2 (sb_writers#12){.+.+}-{0:0}:
       lo_write_bvec+0xc2/0x240 [loop]
       loop_process_work+0x238/0xd00 [loop]
       process_one_work+0x26b/0x560
       worker_thread+0x55/0x3c0
       kthread+0x140/0x160
       ret_from_fork+0x1f/0x30

-> #1 ((work_completion)(&lo->rootcg_work)){+.+.}-{0:0}:
       process_one_work+0x245/0x560
       worker_thread+0x55/0x3c0
       kthread+0x140/0x160
       ret_from_fork+0x1f/0x30

-> #0 ((wq_completion)loop0){+.+.}-{0:0}:
       __lock_acquire+0x10ea/0x1d90
       lock_acquire+0xb5/0x2b0
       flush_workqueue+0x91/0x5e0
       drain_workqueue+0xa0/0x110
       destroy_workqueue+0x36/0x250
       __loop_clr_fd+0x9a/0x660 [loop]
       block_ioctl+0x3f/0x50
       __x64_sys_ioctl+0x80/0xb0
       do_syscall_64+0x38/0x90
       entry_SYSCALL_64_after_hwframe+0x44/0xae

other info that might help us debug this:

Chain exists of:
  (wq_completion)loop0 --> &disk->open_mutex --> &lo->lo_mutex

 Possible unsafe locking scenario:

       CPU0                    CPU1
       ----                    ----
  lock(&lo->lo_mutex);
                               lock(&disk->open_mutex);
                               lock(&lo->lo_mutex);
  lock((wq_completion)loop0);

 *** DEADLOCK ***

1 lock held by losetup/11576:
 #0: ffff9bbe88e4fc68 (&lo->lo_mutex){+.+.}-{3:3}, at: __loop_clr_fd+0x41/0x660 [loop]

stack backtrace:
CPU: 0 PID: 11576 Comm: losetup Not tainted 5.14.0-rc2+ #405
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Call Trace:
 dump_stack_lvl+0x57/0x72
 check_noncircular+0xcf/0xf0
 ? stack_trace_save+0x3b/0x50
 __lock_acquire+0x10ea/0x1d90
 lock_acquire+0xb5/0x2b0
 ? flush_workqueue+0x67/0x5e0
 ? lockdep_init_map_type+0x47/0x220
 flush_workqueue+0x91/0x5e0
 ? flush_workqueue+0x67/0x5e0
 ? verify_cpu+0xf0/0x100
 drain_workqueue+0xa0/0x110
 destroy_workqueue+0x36/0x250
 __loop_clr_fd+0x9a/0x660 [loop]
 ? blkdev_ioctl+0x8d/0x2a0
 block_ioctl+0x3f/0x50
 __x64_sys_ioctl+0x80/0xb0
 do_syscall_64+0x38/0x90
 entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x7f31b02404cb

Instead what we want to do is populate our device lookup args before we
grab any locks, and then pass these args into btrfs_rm_device().  From
there we can find the device and do the appropriate removal.

Suggested-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>

1 files changed, 1 insertions, 1 deletions

diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index acf7c1307e14..3b8130680749 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -529,7 +529,7 @@ struct btrfs_device *btrfs_alloc_device(struct btrfs_fs_info *fs_info,
 void btrfs_put_dev_args_from_path(struct btrfs_dev_lookup_args *args);
 void btrfs_free_device(struct btrfs_device *device);
 int btrfs_rm_device(struct btrfs_fs_info *fs_info,
-		    const char *device_path, u64 devid,
+		    struct btrfs_dev_lookup_args *args,
 		    struct block_device **bdev, fmode_t *mode);
 void __exit btrfs_cleanup_fs_uuids(void);
 int btrfs_num_copies(struct btrfs_fs_info *fs_info, u64 logical, u64 len);