nfs: disintegrate UAPI for nfs

This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently.  After these patches, userspace
headers will be segregated into:

        include/uapi/linux/.../foo.h

for the userspace interface stuff, and:

        include/linux/.../foo.h

for the strictly kernel internal stuff.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

14 files changed, 462 insertions, 103 deletions

diff --git a/include/acpi/acbuffer.h b/include/acpi/acbuffer.h
new file mode 100644
index 000000000000..a1e45cdd729a
--- /dev/null
+++ b/include/acpi/acbuffer.h
@@ -0,0 +1,235 @@
+/******************************************************************************
+ *
+ * Name: acbuffer.h - Support for buffers returned by ACPI predefined names
+ *
+ *****************************************************************************/
+
+/*
+ * Copyright (C) 2000 - 2012, Intel Corp.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions, and the following disclaimer,
+ *    without modification.
+ * 2. Redistributions in binary form must reproduce at minimum a disclaimer
+ *    substantially similar to the "NO WARRANTY" disclaimer below
+ *    ("Disclaimer") and any redistribution must be conditioned upon
+ *    including a substantially similar Disclaimer requirement for further
+ *    binary redistribution.
+ * 3. Neither the names of the above-listed copyright holders nor the names
+ *    of any contributors may be used to endorse or promote products derived
+ *    from this software without specific prior written permission.
+ *
+ * Alternatively, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") version 2 as published by the Free
+ * Software Foundation.
+ *
+ * NO WARRANTY
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
+ * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
+ * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
+ * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGES.
+ */
+
+#ifndef __ACBUFFER_H__
+#define __ACBUFFER_H__
+
+/*
+ * Contains buffer structures for these predefined names:
+ * _FDE, _GRT, _GTM, _PLD, _SRT
+ */
+
+/*
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
+ */
+
+/* _FDE return value */
+
+struct acpi_fde_info {
+	u32 floppy0;
+	u32 floppy1;
+	u32 floppy2;
+	u32 floppy3;
+	u32 tape;
+};
+
+/*
+ * _GRT return value
+ * _SRT input value
+ */
+struct acpi_grt_info {
+	u16 year;
+	u8 month;
+	u8 day;
+	u8 hour;
+	u8 minute;
+	u8 second;
+	u8 valid;
+	u16 milliseconds;
+	u16 timezone;
+	u8 daylight;
+	u8 reserved[3];
+};
+
+/* _GTM return value */
+
+struct acpi_gtm_info {
+	u32 pio_speed0;
+	u32 dma_speed0;
+	u32 pio_speed1;
+	u32 dma_speed1;
+	u32 flags;
+};
+
+/*
+ * Formatted _PLD return value. The minimum size is a package containing
+ * one buffer.
+ * Revision 1: Buffer is 16 bytes (128 bits)
+ * Revision 2: Buffer is 20 bytes (160 bits)
+ *
+ * Note: This structure is returned from the acpi_decode_pld_buffer
+ * interface.
+ */
+struct acpi_pld_info {
+	u8 revision;
+	u8 ignore_color;
+	u32 color;
+	u16 width;
+	u16 height;
+	u8 user_visible;
+	u8 dock;
+	u8 lid;
+	u8 panel;
+	u8 vertical_position;
+	u8 horizontal_position;
+	u8 shape;
+	u8 group_orientation;
+	u8 group_token;
+	u8 group_position;
+	u8 bay;
+	u8 ejectable;
+	u8 ospm_eject_required;
+	u8 cabinet_number;
+	u8 card_cage_number;
+	u8 reference;
+	u8 rotation;
+	u8 order;
+	u8 reserved;
+	u16 vertical_offset;
+	u16 horizontal_offset;
+};
+
+/*
+ * Macros to:
+ *     1) Convert a _PLD buffer to internal struct acpi_pld_info format - ACPI_PLD_GET*
+ *        (Used by acpi_decode_pld_buffer)
+ *     2) Construct a _PLD buffer - ACPI_PLD_SET*
+ *        (Intended for BIOS use only)
+ */
+#define ACPI_PLD_REV1_BUFFER_SIZE               16	/* For Revision 1 of the buffer (From ACPI spec) */
+#define ACPI_PLD_BUFFER_SIZE                    20	/* For Revision 2 of the buffer (From ACPI spec) */
+
+/* First 32-bit dword, bits 0:32 */
+
+#define ACPI_PLD_GET_REVISION(dword)            ACPI_GET_BITS (dword, 0, ACPI_7BIT_MASK)
+#define ACPI_PLD_SET_REVISION(dword,value)      ACPI_SET_BITS (dword, 0, ACPI_7BIT_MASK, value)	/* Offset 0, Len 7 */
+
+#define ACPI_PLD_GET_IGNORE_COLOR(dword)        ACPI_GET_BITS (dword, 7, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_IGNORE_COLOR(dword,value)  ACPI_SET_BITS (dword, 7, ACPI_1BIT_MASK, value)	/* Offset 7, Len 1 */
+
+#define ACPI_PLD_GET_COLOR(dword)               ACPI_GET_BITS (dword, 8, ACPI_24BIT_MASK)
+#define ACPI_PLD_SET_COLOR(dword,value)         ACPI_SET_BITS (dword, 8, ACPI_24BIT_MASK, value)	/* Offset 8, Len 24 */
+
+/* Second 32-bit dword, bits 33:63 */
+
+#define ACPI_PLD_GET_WIDTH(dword)               ACPI_GET_BITS (dword, 0, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_WIDTH(dword,value)         ACPI_SET_BITS (dword, 0, ACPI_16BIT_MASK, value)	/* Offset 32+0=32, Len 16 */
+
+#define ACPI_PLD_GET_HEIGHT(dword)              ACPI_GET_BITS (dword, 16, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_HEIGHT(dword,value)        ACPI_SET_BITS (dword, 16, ACPI_16BIT_MASK, value)	/* Offset 32+16=48, Len 16 */
+
+/* Third 32-bit dword, bits 64:95 */
+
+#define ACPI_PLD_GET_USER_VISIBLE(dword)        ACPI_GET_BITS (dword, 0, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_USER_VISIBLE(dword,value)  ACPI_SET_BITS (dword, 0, ACPI_1BIT_MASK, value)	/* Offset 64+0=64, Len 1 */
+
+#define ACPI_PLD_GET_DOCK(dword)                ACPI_GET_BITS (dword, 1, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_DOCK(dword,value)          ACPI_SET_BITS (dword, 1, ACPI_1BIT_MASK, value)	/* Offset 64+1=65, Len 1 */
+
+#define ACPI_PLD_GET_LID(dword)                 ACPI_GET_BITS (dword, 2, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_LID(dword,value)           ACPI_SET_BITS (dword, 2, ACPI_1BIT_MASK, value)	/* Offset 64+2=66, Len 1 */
+
+#define ACPI_PLD_GET_PANEL(dword)               ACPI_GET_BITS (dword, 3, ACPI_3BIT_MASK)
+#define ACPI_PLD_SET_PANEL(dword,value)         ACPI_SET_BITS (dword, 3, ACPI_3BIT_MASK, value)	/* Offset 64+3=67, Len 3 */
+
+#define ACPI_PLD_GET_VERTICAL(dword)            ACPI_GET_BITS (dword, 6, ACPI_2BIT_MASK)
+#define ACPI_PLD_SET_VERTICAL(dword,value)      ACPI_SET_BITS (dword, 6, ACPI_2BIT_MASK, value)	/* Offset 64+6=70, Len 2 */
+
+#define ACPI_PLD_GET_HORIZONTAL(dword)          ACPI_GET_BITS (dword, 8, ACPI_2BIT_MASK)
+#define ACPI_PLD_SET_HORIZONTAL(dword,value)    ACPI_SET_BITS (dword, 8, ACPI_2BIT_MASK, value)	/* Offset 64+8=72, Len 2 */
+
+#define ACPI_PLD_GET_SHAPE(dword)               ACPI_GET_BITS (dword, 10, ACPI_4BIT_MASK)
+#define ACPI_PLD_SET_SHAPE(dword,value)         ACPI_SET_BITS (dword, 10, ACPI_4BIT_MASK, value)	/* Offset 64+10=74, Len 4 */
+
+#define ACPI_PLD_GET_ORIENTATION(dword)         ACPI_GET_BITS (dword, 14, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_ORIENTATION(dword,value)   ACPI_SET_BITS (dword, 14, ACPI_1BIT_MASK, value)	/* Offset 64+14=78, Len 1 */
+
+#define ACPI_PLD_GET_TOKEN(dword)               ACPI_GET_BITS (dword, 15, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_TOKEN(dword,value)         ACPI_SET_BITS (dword, 15, ACPI_8BIT_MASK, value)	/* Offset 64+15=79, Len 8 */
+
+#define ACPI_PLD_GET_POSITION(dword)            ACPI_GET_BITS (dword, 23, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_POSITION(dword,value)      ACPI_SET_BITS (dword, 23, ACPI_8BIT_MASK, value)	/* Offset 64+23=87, Len 8 */
+
+#define ACPI_PLD_GET_BAY(dword)                 ACPI_GET_BITS (dword, 31, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_BAY(dword,value)           ACPI_SET_BITS (dword, 31, ACPI_1BIT_MASK, value)	/* Offset 64+31=95, Len 1 */
+
+/* Fourth 32-bit dword, bits 96:127 */
+
+#define ACPI_PLD_GET_EJECTABLE(dword)           ACPI_GET_BITS (dword, 0, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_EJECTABLE(dword,value)     ACPI_SET_BITS (dword, 0, ACPI_1BIT_MASK, value)	/* Offset 96+0=96, Len 1 */
+
+#define ACPI_PLD_GET_OSPM_EJECT(dword)          ACPI_GET_BITS (dword, 1, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_OSPM_EJECT(dword,value)    ACPI_SET_BITS (dword, 1, ACPI_1BIT_MASK, value)	/* Offset 96+1=97, Len 1 */
+
+#define ACPI_PLD_GET_CABINET(dword)             ACPI_GET_BITS (dword, 2, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_CABINET(dword,value)       ACPI_SET_BITS (dword, 2, ACPI_8BIT_MASK, value)	/* Offset 96+2=98, Len 8 */
+
+#define ACPI_PLD_GET_CARD_CAGE(dword)           ACPI_GET_BITS (dword, 10, ACPI_8BIT_MASK)
+#define ACPI_PLD_SET_CARD_CAGE(dword,value)     ACPI_SET_BITS (dword, 10, ACPI_8BIT_MASK, value)	/* Offset 96+10=106, Len 8 */
+
+#define ACPI_PLD_GET_REFERENCE(dword)           ACPI_GET_BITS (dword, 18, ACPI_1BIT_MASK)
+#define ACPI_PLD_SET_REFERENCE(dword,value)     ACPI_SET_BITS (dword, 18, ACPI_1BIT_MASK, value)	/* Offset 96+18=114, Len 1 */
+
+#define ACPI_PLD_GET_ROTATION(dword)            ACPI_GET_BITS (dword, 19, ACPI_4BIT_MASK)
+#define ACPI_PLD_SET_ROTATION(dword,value)      ACPI_SET_BITS (dword, 19, ACPI_4BIT_MASK, value)	/* Offset 96+19=115, Len 4 */
+
+#define ACPI_PLD_GET_ORDER(dword)               ACPI_GET_BITS (dword, 23, ACPI_5BIT_MASK)
+#define ACPI_PLD_SET_ORDER(dword,value)         ACPI_SET_BITS (dword, 23, ACPI_5BIT_MASK, value)	/* Offset 96+23=119, Len 5 */
+
+/* Fifth 32-bit dword, bits 128:159 (Revision 2 of _PLD only) */
+
+#define ACPI_PLD_GET_VERT_OFFSET(dword)         ACPI_GET_BITS (dword, 0, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_VERT_OFFSET(dword,value)   ACPI_SET_BITS (dword, 0, ACPI_16BIT_MASK, value)	/* Offset 128+0=128, Len 16 */
+
+#define ACPI_PLD_GET_HORIZ_OFFSET(dword)        ACPI_GET_BITS (dword, 16, ACPI_16BIT_MASK)
+#define ACPI_PLD_SET_HORIZ_OFFSET(dword,value)  ACPI_SET_BITS (dword, 16, ACPI_16BIT_MASK, value)	/* Offset 128+16=144, Len 16 */
+
+#endif				/* ACBUFFER_H */
diff --git a/include/acpi/acnames.h b/include/acpi/acnames.h
index d988ac54f41e..745dd24e3cb5 100644
--- a/include/acpi/acnames.h
+++ b/include/acpi/acnames.h
@@ -63,11 +63,10 @@
 #define METHOD_NAME__PRW        "_PRW"
 #define METHOD_NAME__SRS        "_SRS"
 #define METHOD_NAME__CBA        "_CBA"
+#define METHOD_NAME__PLD        "_PLD"
 
 /* Method names - these methods must appear at the namespace root */
 
-#define METHOD_PATHNAME__BFS    "\\_BFS"
-#define METHOD_PATHNAME__GTS    "\\_GTS"
 #define METHOD_PATHNAME__PTS    "\\_PTS"
 #define METHOD_PATHNAME__SST    "\\_SI._SST"
 #define METHOD_PATHNAME__WAK    "\\_WAK"
diff --git a/include/acpi/acpi.h b/include/acpi/acpi.h
index c433d5e27679..c1ea8436961f 100644
--- a/include/acpi/acpi.h
+++ b/include/acpi/acpi.h
@@ -53,14 +53,14 @@
  *
  * Note: The order of these include files is important.
  */
-#include "platform/acenv.h"	/* Environment-specific items */
-#include "acnames.h"		/* Common ACPI names and strings */
-#include "actypes.h"		/* ACPICA data types and structures */
-#include "acexcep.h"		/* ACPICA exceptions */
-#include "actbl.h"		/* ACPI table definitions */
-#include "acoutput.h"		/* Error output and Debug macros */
-#include "acrestyp.h"		/* Resource Descriptor structs */
-#include "acpiosxf.h"		/* OSL interfaces (ACPICA-to-OS) */
-#include "acpixf.h"		/* ACPI core subsystem external interfaces */
+#include <acpi/platform/acenv.h>	/* Environment-specific items */
+#include <acpi/acnames.h>		/* Common ACPI names and strings */
+#include <acpi/actypes.h>		/* ACPICA data types and structures */
+#include <acpi/acexcep.h>		/* ACPICA exceptions */
+#include <acpi/actbl.h>		/* ACPI table definitions */
+#include <acpi/acoutput.h>		/* Error output and Debug macros */
+#include <acpi/acrestyp.h>		/* Resource Descriptor structs */
+#include <acpi/acpiosxf.h>		/* OSL interfaces (ACPICA-to-OS) */
+#include <acpi/acpixf.h>		/* ACPI core subsystem external interfaces */
 
 #endif				/* __ACPI_H__ */
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index bde976ee068d..0daa0fbd8654 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -54,37 +54,8 @@ acpi_status
 acpi_evaluate_hotplug_ost(acpi_handle handle, u32 source_event,
 			u32 status_code, struct acpi_buffer *status_buf);
 
-struct acpi_pld {
-	unsigned int revision:7; /* 0 */
-	unsigned int ignore_colour:1; /* 7 */
-	unsigned int colour:24; /* 8 */
-	unsigned int width:16; /* 32 */
-	unsigned int height:16; /* 48 */
-	unsigned int user_visible:1; /* 64 */
-	unsigned int dock:1; /* 65 */
-	unsigned int lid:1; /* 66 */
-	unsigned int panel:3; /* 67 */
-	unsigned int vertical_pos:2; /* 70 */
-	unsigned int horizontal_pos:2; /* 72 */
-	unsigned int shape:4; /* 74 */
-	unsigned int group_orientation:1; /* 78 */
-	unsigned int group_token:8; /* 79 */
-	unsigned int group_position:8; /* 87 */
-	unsigned int bay:1; /* 95 */
-	unsigned int ejectable:1; /* 96 */
-	unsigned int ospm_eject_required:1; /* 97 */
-	unsigned int cabinet_number:8; /* 98 */
-	unsigned int card_cage_number:8; /* 106 */
-	unsigned int reference:1; /* 114 */
-	unsigned int rotation:4; /* 115 */
-	unsigned int order:5; /* 119 */
-	unsigned int reserved:4; /* 124 */
-	unsigned int vertical_offset:16; /* 128 */
-	unsigned int horizontal_offset:16; /* 144 */
-} __attribute__((__packed__));
-
 acpi_status
-acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld *pld);
+acpi_get_physical_device_location(acpi_handle handle, struct acpi_pld_info **pld);
 #ifdef CONFIG_ACPI
 
 #include <linux/proc_fs.h>
@@ -208,6 +179,7 @@ struct acpi_device_pnp {
 	struct list_head ids;		/* _HID and _CIDs */
 	acpi_device_name device_name;	/* Driver-determined */
 	acpi_device_class device_class;	/*        "          */
+	union acpi_object *str_obj;	/* unicode string for _STR method */
 };
 
 #define acpi_device_bid(d)	((d)->pnp.bus_id)
@@ -282,8 +254,16 @@ struct acpi_device_wakeup {
 	int prepare_count;
 };
 
-/* Device */
+struct acpi_device_physical_node {
+	u8 node_id;
+	struct list_head node;
+	struct device *dev;
+};
+
+/* set maximum of physical nodes to 32 for expansibility */
+#define ACPI_MAX_PHYSICAL_NODE	32
 
+/* Device */
 struct acpi_device {
 	int device_type;
 	acpi_handle handle;		/* no handle for fixed hardware */
@@ -304,6 +284,10 @@ struct acpi_device {
 	struct device dev;
 	struct acpi_bus_ops bus_ops;	/* workaround for different code path for hotplug */
 	enum acpi_bus_removal_type removal_type;	/* indicate for different removal type */
+	u8 physical_node_count;
+	struct list_head physical_node_list;
+	struct mutex physical_node_lock;
+	DECLARE_BITMAP(physical_node_id_bitmap, ACPI_MAX_PHYSICAL_NODE);
 };
 
 static inline void *acpi_driver_data(struct acpi_device *d)
@@ -381,6 +365,19 @@ int acpi_match_device_ids(struct acpi_device *device,
 int acpi_create_dir(struct acpi_device *);
 void acpi_remove_dir(struct acpi_device *);
 
+
+/**
+ * module_acpi_driver(acpi_driver) - Helper macro for registering an ACPI driver
+ * @__acpi_driver: acpi_driver struct
+ *
+ * Helper macro for ACPI drivers which do not do anything special in module
+ * init/exit. This eliminates a lot of boilerplate. Each module may only
+ * use this macro once, and calling it replaces module_init() and module_exit()
+ */
+#define module_acpi_driver(__acpi_driver) \
+	module_driver(__acpi_driver, acpi_bus_register_driver, \
+		      acpi_bus_unregister_driver)
+
 /*
  * Bind physical devices with ACPI devices
  */
@@ -394,7 +391,6 @@ struct acpi_bus_type {
 };
 int register_acpi_bus_type(struct acpi_bus_type *);
 int unregister_acpi_bus_type(struct acpi_bus_type *);
-struct device *acpi_get_physical_device(acpi_handle);
 
 struct acpi_pci_root {
 	struct list_head node;
diff --git a/include/acpi/acpiosxf.h b/include/acpi/acpiosxf.h
index 0650f5fa7ce9..1222ba93d80a 100644
--- a/include/acpi/acpiosxf.h
+++ b/include/acpi/acpiosxf.h
@@ -47,8 +47,8 @@
 #ifndef __ACPIOSXF_H__
 #define __ACPIOSXF_H__
 
-#include "platform/acenv.h"
-#include "actypes.h"
+#include <acpi/platform/acenv.h>
+#include <acpi/actypes.h>
 
 /* Types for acpi_os_execute */
 
diff --git a/include/acpi/acpixf.h b/include/acpi/acpixf.h
index 26a92fc28a59..8b891dbead66 100644
--- a/include/acpi/acpixf.h
+++ b/include/acpi/acpixf.h
@@ -47,11 +47,12 @@
 
 /* Current ACPICA subsystem version in YYYYMMDD format */
 
-#define ACPI_CA_VERSION                 0x20120711
+#define ACPI_CA_VERSION                 0x20120913
 
-#include "acconfig.h"
-#include "actypes.h"
-#include "actbl.h"
+#include <acpi/acconfig.h>
+#include <acpi/actypes.h>
+#include <acpi/actbl.h>
+#include <acpi/acbuffer.h>
 
 extern u8 acpi_gbl_permanent_mmap;
 
@@ -144,6 +145,10 @@ acpi_check_address_range(acpi_adr_space_type space_id,
 			 acpi_physical_address address,
 			 acpi_size length, u8 warn);
 
+acpi_status
+acpi_decode_pld_buffer(u8 *in_buffer,
+		       acpi_size length, struct acpi_pld_info **return_buffer);
+
 /*
  * ACPI Memory management
  */
diff --git a/include/acpi/actbl.h b/include/acpi/actbl.h
index 59a73e1b2845..4f94b1d812d5 100644
--- a/include/acpi/actbl.h
+++ b/include/acpi/actbl.h
@@ -79,9 +79,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
@@ -94,7 +100,7 @@
 struct acpi_table_header {
 	char signature[ACPI_NAME_SIZE];	/* ASCII table signature */
 	u32 length;		/* Length of table in bytes, including this header */
-	u8 revision;		/* ACPI Specification minor version # */
+	u8 revision;		/* ACPI Specification minor version number */
 	u8 checksum;		/* To make sum of entire table == 0 */
 	char oem_id[ACPI_OEM_ID_SIZE];	/* ASCII OEM identification */
 	char oem_table_id[ACPI_OEM_TABLE_ID_SIZE];	/* ASCII OEM table identification */
@@ -108,7 +114,7 @@ struct acpi_table_header {
  * GAS - Generic Address Structure (ACPI 2.0+)
  *
  * Note: Since this structure is used in the ACPI tables, it is byte aligned.
- * If misaliged access is not supported by the hardware, accesses to the
+ * If misaligned access is not supported by the hardware, accesses to the
  * 64-bit Address field must be performed with care.
  *
  ******************************************************************************/
@@ -210,18 +216,18 @@ struct acpi_table_fadt {
 	u8 preferred_profile;	/* Conveys preferred power management profile to OSPM. */
 	u16 sci_interrupt;	/* System vector of SCI interrupt */
 	u32 smi_command;	/* 32-bit Port address of SMI command port */
-	u8 acpi_enable;		/* Value to write to smi_cmd to enable ACPI */
-	u8 acpi_disable;	/* Value to write to smi_cmd to disable ACPI */
-	u8 s4_bios_request;	/* Value to write to SMI CMD to enter S4BIOS state */
+	u8 acpi_enable;		/* Value to write to SMI_CMD to enable ACPI */
+	u8 acpi_disable;	/* Value to write to SMI_CMD to disable ACPI */
+	u8 s4_bios_request;	/* Value to write to SMI_CMD to enter S4BIOS state */
 	u8 pstate_control;	/* Processor performance state control */
-	u32 pm1a_event_block;	/* 32-bit Port address of Power Mgt 1a Event Reg Blk */
-	u32 pm1b_event_block;	/* 32-bit Port address of Power Mgt 1b Event Reg Blk */
-	u32 pm1a_control_block;	/* 32-bit Port address of Power Mgt 1a Control Reg Blk */
-	u32 pm1b_control_block;	/* 32-bit Port address of Power Mgt 1b Control Reg Blk */
-	u32 pm2_control_block;	/* 32-bit Port address of Power Mgt 2 Control Reg Blk */
-	u32 pm_timer_block;	/* 32-bit Port address of Power Mgt Timer Ctrl Reg Blk */
-	u32 gpe0_block;		/* 32-bit Port address of General Purpose Event 0 Reg Blk */
-	u32 gpe1_block;		/* 32-bit Port address of General Purpose Event 1 Reg Blk */
+	u32 pm1a_event_block;	/* 32-bit port address of Power Mgt 1a Event Reg Blk */
+	u32 pm1b_event_block;	/* 32-bit port address of Power Mgt 1b Event Reg Blk */
+	u32 pm1a_control_block;	/* 32-bit port address of Power Mgt 1a Control Reg Blk */
+	u32 pm1b_control_block;	/* 32-bit port address of Power Mgt 1b Control Reg Blk */
+	u32 pm2_control_block;	/* 32-bit port address of Power Mgt 2 Control Reg Blk */
+	u32 pm_timer_block;	/* 32-bit port address of Power Mgt Timer Ctrl Reg Blk */
+	u32 gpe0_block;		/* 32-bit port address of General Purpose Event 0 Reg Blk */
+	u32 gpe1_block;		/* 32-bit port address of General Purpose Event 1 Reg Blk */
 	u8 pm1_event_length;	/* Byte Length of ports at pm1x_event_block */
 	u8 pm1_control_length;	/* Byte Length of ports at pm1x_control_block */
 	u8 pm2_control_length;	/* Byte Length of ports at pm2_control_block */
@@ -229,12 +235,12 @@ struct acpi_table_fadt {
 	u8 gpe0_block_length;	/* Byte Length of ports at gpe0_block */
 	u8 gpe1_block_length;	/* Byte Length of ports at gpe1_block */
 	u8 gpe1_base;		/* Offset in GPE number space where GPE1 events start */
-	u8 cst_control;		/* Support for the _CST object and C States change notification */
+	u8 cst_control;		/* Support for the _CST object and C-States change notification */
 	u16 c2_latency;		/* Worst case HW latency to enter/exit C2 state */
 	u16 c3_latency;		/* Worst case HW latency to enter/exit C3 state */
-	u16 flush_size;		/* Processor's memory cache line width, in bytes */
+	u16 flush_size;		/* Processor memory cache line width, in bytes */
 	u16 flush_stride;	/* Number of flush strides that need to be read */
-	u8 duty_offset;		/* Processor duty cycle index in processor's P_CNT reg */
+	u8 duty_offset;		/* Processor duty cycle index in processor P_CNT reg */
 	u8 duty_width;		/* Processor duty cycle value bit width in P_CNT register */
 	u8 day_alarm;		/* Index to day-of-month alarm in RTC CMOS RAM */
 	u8 month_alarm;		/* Index to month-of-year alarm in RTC CMOS RAM */
@@ -255,11 +261,11 @@ struct acpi_table_fadt {
 	struct acpi_generic_address xpm_timer_block;	/* 64-bit Extended Power Mgt Timer Ctrl Reg Blk address */
 	struct acpi_generic_address xgpe0_block;	/* 64-bit Extended General Purpose Event 0 Reg Blk address */
 	struct acpi_generic_address xgpe1_block;	/* 64-bit Extended General Purpose Event 1 Reg Blk address */
-	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register */
-	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register */
+	struct acpi_generic_address sleep_control;	/* 64-bit Sleep Control register (ACPI 5.0) */
+	struct acpi_generic_address sleep_status;	/* 64-bit Sleep Status register (ACPI 5.0) */
 };
 
-/* Masks for FADT Boot Architecture Flags (boot_flags) */
+/* Masks for FADT Boot Architecture Flags (boot_flags) [Vx]=Introduced in this FADT revision */
 
 #define ACPI_FADT_LEGACY_DEVICES    (1)  	/* 00: [V2] System has LPC or ISA bus devices */
 #define ACPI_FADT_8042              (1<<1)	/* 01: [V3] System has an 8042 controller on port 60/64 */
@@ -272,13 +278,13 @@ struct acpi_table_fadt {
 
 /* Masks for FADT flags */
 
-#define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The wbinvd instruction works properly */
-#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] wbinvd flushes but does not invalidate caches */
+#define ACPI_FADT_WBINVD            (1)	/* 00: [V1] The WBINVD instruction works properly */
+#define ACPI_FADT_WBINVD_FLUSH      (1<<1)	/* 01: [V1] WBINVD flushes but does not invalidate caches */
 #define ACPI_FADT_C1_SUPPORTED      (1<<2)	/* 02: [V1] All processors support C1 state */
 #define ACPI_FADT_C2_MP_SUPPORTED   (1<<3)	/* 03: [V1] C2 state works on MP system */
 #define ACPI_FADT_POWER_BUTTON      (1<<4)	/* 04: [V1] Power button is handled as a control method device */
 #define ACPI_FADT_SLEEP_BUTTON      (1<<5)	/* 05: [V1] Sleep button is handled as a control method device */
-#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status not in fixed register space */
+#define ACPI_FADT_FIXED_RTC         (1<<6)	/* 06: [V1] RTC wakeup status is not in fixed register space */
 #define ACPI_FADT_S4_RTC_WAKE       (1<<7)	/* 07: [V1] RTC alarm can wake system from S4 */
 #define ACPI_FADT_32BIT_TIMER       (1<<8)	/* 08: [V1] ACPI timer width is 32-bit (0=24-bit) */
 #define ACPI_FADT_DOCKING_SUPPORTED (1<<9)	/* 09: [V1] Docking supported */
@@ -297,7 +303,7 @@ struct acpi_table_fadt {
 
 /* Values for preferred_profile (Preferred Power Management Profiles) */
 
-enum acpi_prefered_pm_profiles {
+enum acpi_preferred_pm_profiles {
 	PM_UNSPECIFIED = 0,
 	PM_DESKTOP = 1,
 	PM_MOBILE = 2,
@@ -335,7 +341,7 @@ union acpi_name_union {
 struct acpi_table_desc {
 	acpi_physical_address address;
 	struct acpi_table_header *pointer;
-	u32 length;		/* Length fixed at 32 bits */
+	u32 length;		/* Length fixed at 32 bits (fixed in table header) */
 	union acpi_name_union signature;
 	acpi_owner_id owner_id;
 	u8 flags;
diff --git a/include/acpi/actbl1.h b/include/acpi/actbl1.h
index 300d14e7c5d5..280fc45b59dd 100644
--- a/include/acpi/actbl1.h
+++ b/include/acpi/actbl1.h
@@ -79,9 +79,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
@@ -489,7 +495,9 @@ enum acpi_hest_notify_types {
 	ACPI_HEST_NOTIFY_LOCAL = 2,
 	ACPI_HEST_NOTIFY_SCI = 3,
 	ACPI_HEST_NOTIFY_NMI = 4,
-	ACPI_HEST_NOTIFY_RESERVED = 5	/* 5 and greater are reserved */
+	ACPI_HEST_NOTIFY_CMCI = 5,	/* ACPI 5.0 */
+	ACPI_HEST_NOTIFY_MCE = 6,	/* ACPI 5.0 */
+	ACPI_HEST_NOTIFY_RESERVED = 7	/* 7 and greater are reserved */
 };
 
 /* Values for config_write_enable bitfield above */
diff --git a/include/acpi/actbl2.h b/include/acpi/actbl2.h
index d9ceb3d31629..1b2b356486d1 100644
--- a/include/acpi/actbl2.h
+++ b/include/acpi/actbl2.h
@@ -63,6 +63,8 @@
  */
 #define ACPI_SIG_ASF            "ASF!"	/* Alert Standard Format table */
 #define ACPI_SIG_BOOT           "BOOT"	/* Simple Boot Flag Table */
+#define ACPI_SIG_CSRT           "CSRT"	/* Core System Resource Table */
+#define ACPI_SIG_DBG2           "DBG2"	/* Debug Port table type 2 */
 #define ACPI_SIG_DBGP           "DBGP"	/* Debug Port table */
 #define ACPI_SIG_DMAR           "DMAR"	/* DMA Remapping table */
 #define ACPI_SIG_HPET           "HPET"	/* High Precision Event Timer table */
@@ -96,9 +98,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
@@ -232,6 +240,115 @@ struct acpi_table_boot {
 
 /*******************************************************************************
  *
+ * CSRT - Core System Resource Table
+ *        Version 0
+ *
+ * Conforms to the "Core System Resource Table (CSRT)", November 14, 2011
+ *
+ ******************************************************************************/
+
+struct acpi_table_csrt {
+	struct acpi_table_header header;	/* Common ACPI table header */
+};
+
+/* Resource Group subtable */
+
+struct acpi_csrt_group {
+	u32 length;
+	u32 vendor_id;
+	u32 subvendor_id;
+	u16 device_id;
+	u16 subdevice_id;
+	u16 revision;
+	u16 reserved;
+	u32 info_length;
+
+	/* Shared data (length = info_length) immediately follows */
+};
+
+/* Resource Descriptor subtable */
+
+struct acpi_csrt_descriptor {
+	u32 length;
+	u16 type;
+	u16 subtype;
+	u32 uid;
+
+	/* Resource-specific information immediately follows */
+};
+
+/* Resource Types */
+
+#define ACPI_CSRT_TYPE_INTERRUPT    0x0001
+#define ACPI_CSRT_TYPE_TIMER        0x0002
+#define ACPI_CSRT_TYPE_DMA          0x0003
+
+/* Resource Subtypes */
+
+#define ACPI_CSRT_XRUPT_LINE        0x0000
+#define ACPI_CSRT_XRUPT_CONTROLLER  0x0001
+#define ACPI_CSRT_TIMER             0x0000
+#define ACPI_CSRT_DMA_CHANNEL       0x0000
+#define ACPI_CSRT_DMA_CONTROLLER    0x0001
+
+/*******************************************************************************
+ *
+ * DBG2 - Debug Port Table 2
+ *        Version 0 (Both main table and subtables)
+ *
+ * Conforms to "Microsoft Debug Port Table 2 (DBG2)", May 22 2012.
+ *
+ ******************************************************************************/
+
+struct acpi_table_dbg2 {
+	struct acpi_table_header header;	/* Common ACPI table header */
+	u32 info_offset;
+	u32 info_count;
+};
+
+/* Debug Device Information Subtable */
+
+struct acpi_dbg2_device {
+	u8 revision;
+	u16 length;
+	u8 register_count;	/* Number of base_address registers */
+	u16 namepath_length;
+	u16 namepath_offset;
+	u16 oem_data_length;
+	u16 oem_data_offset;
+	u16 port_type;
+	u16 port_subtype;
+	u16 reserved;
+	u16 base_address_offset;
+	u16 address_size_offset;
+	/*
+	 * Data that follows:
+	 *    base_address (required) - Each in 12-byte Generic Address Structure format.
+	 *    address_size (required) - Array of u32 sizes corresponding to each base_address register.
+	 *    Namepath    (required) - Null terminated string. Single dot if not supported.
+	 *    oem_data    (optional) - Length is oem_data_length.
+	 */
+};
+
+/* Types for port_type field above */
+
+#define ACPI_DBG2_SERIAL_PORT       0x8000
+#define ACPI_DBG2_1394_PORT         0x8001
+#define ACPI_DBG2_USB_PORT          0x8002
+#define ACPI_DBG2_NET_PORT          0x8003
+
+/* Subtypes for port_subtype field above */
+
+#define ACPI_DBG2_16550_COMPATIBLE  0x0000
+#define ACPI_DBG2_16550_SUBSET      0x0001
+
+#define ACPI_DBG2_1394_STANDARD     0x0000
+
+#define ACPI_DBG2_USB_XHCI          0x0000
+#define ACPI_DBG2_USB_EHCI          0x0001
+
+/*******************************************************************************
+ *
  * DBGP - Debug Port table
  *        Version 1
  *
diff --git a/include/acpi/actbl3.h b/include/acpi/actbl3.h
index f65a0ed869eb..8c61b5fe42a4 100644
--- a/include/acpi/actbl3.h
+++ b/include/acpi/actbl3.h
@@ -75,7 +75,6 @@
 /* Reserved table signatures */
 
 #define ACPI_SIG_CSRT           "CSRT"	/* Core System Resources Table */
-#define ACPI_SIG_DBG2           "DBG2"	/* Debug Port table 2 */
 #define ACPI_SIG_MATR           "MATR"	/* Memory Address Translation Table */
 #define ACPI_SIG_MSDM           "MSDM"	/* Microsoft Data Management Table */
 #define ACPI_SIG_WPBT           "WPBT"	/* Windows Platform Binary Table */
@@ -87,9 +86,15 @@
 #pragma pack(1)
 
 /*
- * Note about bitfields: The u8 type is used for bitfields in ACPI tables.
- * This is the only type that is even remotely portable. Anything else is not
- * portable, so do not use any other bitfield types.
+ * Note: C bitfields are not used for this reason:
+ *
+ * "Bitfields are great and easy to read, but unfortunately the C language
+ * does not specify the layout of bitfields in memory, which means they are
+ * essentially useless for dealing with packed data in on-disk formats or
+ * binary wire protocols." (Or ACPI tables and buffers.) "If you ask me,
+ * this decision was a design error in C. Ritchie could have picked an order
+ * and stuck with it." Norman Ramsey.
+ * See http://stackoverflow.com/a/1053662/41661
  */
 
 /*******************************************************************************
diff --git a/include/acpi/actypes.h b/include/acpi/actypes.h
index 3d00bd5bd7e3..a85bae968262 100644
--- a/include/acpi/actypes.h
+++ b/include/acpi/actypes.h
@@ -519,13 +519,6 @@ typedef u64 acpi_integer;
 #define ACPI_SLEEP_TYPE_INVALID         0xFF
 
 /*
- * Sleep/Wake flags
- */
-#define ACPI_NO_OPTIONAL_METHODS        0x00	/* Do not execute any optional methods */
-#define ACPI_EXECUTE_GTS                0x01	/* For enter sleep interface */
-#define ACPI_EXECUTE_BFS                0x02	/* For leave sleep prep interface */
-
-/*
  * Standard notify values
  */
 #define ACPI_NOTIFY_BUS_CHECK           (u8) 0x00
diff --git a/include/acpi/platform/acenv.h b/include/acpi/platform/acenv.h
index 560a9f272f34..89cee88dd2a5 100644
--- a/include/acpi/platform/acenv.h
+++ b/include/acpi/platform/acenv.h
@@ -138,7 +138,7 @@
 /*! [Begin] no source code translation */
 
 #if defined(_LINUX) || defined(__linux__)
-#include "aclinux.h"
+#include <acpi/platform/aclinux.h>
 
 #elif defined(_AED_EFI)
 #include "acefi.h"
diff --git a/include/acpi/platform/aclinux.h b/include/acpi/platform/aclinux.h
index 7509be30ca01..85d5d8f38452 100644
--- a/include/acpi/platform/aclinux.h
+++ b/include/acpi/platform/aclinux.h
@@ -106,7 +106,7 @@
 
 /* Linux uses GCC */
 
-#include "acgcc.h"
+#include <acpi/platform/acgcc.h>
 
 
 #ifdef __KERNEL__
diff --git a/include/acpi/processor.h b/include/acpi/processor.h
index 64ec644808bc..555d0337ad95 100644
--- a/include/acpi/processor.h
+++ b/include/acpi/processor.h
@@ -3,7 +3,6 @@
 
 #include <linux/kernel.h>
 #include <linux/cpu.h>
-#include <linux/cpuidle.h>
 #include <linux/thermal.h>
 #include <asm/acpi.h>
 
@@ -59,13 +58,11 @@ struct acpi_processor_cx {
 	u8 entry_method;
 	u8 index;
 	u32 latency;
-	u32 power;
 	u8 bm_sts_skip;
 	char desc[ACPI_CX_DESC_LEN];
 };
 
 struct acpi_processor_power {
-	struct cpuidle_device dev;
 	struct acpi_processor_cx *state;
 	unsigned long bm_check_timestamp;
 	u32 default_state;
@@ -325,12 +322,10 @@ extern void acpi_processor_reevaluate_tstate(struct acpi_processor *pr,
 extern const struct file_operations acpi_processor_throttling_fops;
 extern void acpi_processor_throttling_init(void);
 /* in processor_idle.c */
-int acpi_processor_power_init(struct acpi_processor *pr,
-			      struct acpi_device *device);
+int acpi_processor_power_init(struct acpi_processor *pr);
+int acpi_processor_power_exit(struct acpi_processor *pr);
 int acpi_processor_cst_has_changed(struct acpi_processor *pr);
 int acpi_processor_hotplug(struct acpi_processor *pr);
-int acpi_processor_power_exit(struct acpi_processor *pr,
-			      struct acpi_device *device);
 int acpi_processor_suspend(struct device *dev);
 int acpi_processor_resume(struct device *dev);
 extern struct cpuidle_driver acpi_idle_driver;