ARM: OMAP2: Change 24xx to use new register access

This patch changes 24xx to use new register access, except for clock
framework. Clock framework register access will get updates in the
next patch.

Note that board-*.c files change GPMC (General Purpose Memory Controller)
access to use gpmc_cs_write_reg() instead of accessing the registers
directly. The code also uses gpmc_fck instead of it's parent clock
core_l3_ck for GPMC clock.

The H4 board file also adds h4_init_flash() function, which specify the
flash start and end addresses.

Also note that sleep.S removes some unused registers addresses.

Signed-off-by: Paul Walmsley <paul@pwsan.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 67 insertions, 3 deletions

diff --git a/include/asm-arm/arch-omap/io.h b/include/asm-arm/arch-omap/io.h
index 289082d07f14..160578e1f557 100644
--- a/include/asm-arm/arch-omap/io.h
+++ b/include/asm-arm/arch-omap/io.h
@@ -80,6 +80,13 @@
 #define OMAP243X_GPMC_PHYS	OMAP243X_GPMC_BASE	/* 0x49000000 */
 #define OMAP243X_GPMC_VIRT	0xFE000000
 #define OMAP243X_GPMC_SIZE	SZ_1M
+#define OMAP243X_SDRC_PHYS	OMAP243X_SDRC_BASE
+#define OMAP243X_SDRC_VIRT	0xFD000000
+#define OMAP243X_SDRC_SIZE	SZ_1M
+#define OMAP243X_SMS_PHYS	OMAP243X_SMS_BASE
+#define OMAP243X_SMS_VIRT	0xFC000000
+#define OMAP243X_SMS_SIZE	SZ_1M
+
 #endif
 
 #define IO_OFFSET	0x90000000
@@ -88,16 +95,73 @@
 #define io_v2p(va)	((va) - IO_OFFSET)	/* Works for L3 and L4 */
 
 /* DSP */
-#define DSP_MEM_24XX_PHYS	OMAP24XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_24XX_PHYS	OMAP2420_DSP_MEM_BASE	/* 0x58000000 */
 #define DSP_MEM_24XX_VIRT	0xe0000000
 #define DSP_MEM_24XX_SIZE	0x28000
-#define DSP_IPI_24XX_PHYS	OMAP24XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_24XX_PHYS	OMAP2420_DSP_IPI_BASE	/* 0x59000000 */
 #define DSP_IPI_24XX_VIRT	0xe1000000
 #define DSP_IPI_24XX_SIZE	SZ_4K
-#define DSP_MMU_24XX_PHYS	OMAP24XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_24XX_PHYS	OMAP2420_DSP_MMU_BASE	/* 0x5a000000 */
 #define DSP_MMU_24XX_VIRT	0xe2000000
 #define DSP_MMU_24XX_SIZE	SZ_4K
 
+#elif defined(CONFIG_ARCH_OMAP3)
+
+/* We map both L3 and L4 on OMAP3 */
+#define L3_34XX_PHYS		L3_34XX_BASE	/* 0x68000000 */
+#define L3_34XX_VIRT		0xf8000000
+#define L3_34XX_SIZE		SZ_1M   /* 44kB of 128MB used, want 1MB sect */
+
+#define L4_34XX_PHYS		L4_34XX_BASE	/* 0x48000000 */
+#define L4_34XX_VIRT		0xd8000000
+#define L4_34XX_SIZE		SZ_4M   /* 1MB of 128MB used, want 1MB sect */
+
+/*
+ * Need to look at the Size 4M for L4.
+ * VPOM3430 was not working for Int controller
+ */
+
+#define L4_WK_34XX_PHYS		L4_WK_34XX_BASE /* 0x48300000 */
+#define L4_WK_34XX_VIRT		0xd8300000
+#define L4_WK_34XX_SIZE		SZ_1M
+
+#define L4_PER_34XX_PHYS	L4_PER_34XX_BASE /* 0x49000000 */
+#define L4_PER_34XX_VIRT	0xd9000000
+#define L4_PER_34XX_SIZE	SZ_1M
+
+#define L4_EMU_34XX_PHYS	L4_EMU_34XX_BASE /* 0x54000000 */
+#define L4_EMU_34XX_VIRT	0xe4000000
+#define L4_EMU_34XX_SIZE	SZ_64M
+
+#define OMAP34XX_GPMC_PHYS	OMAP34XX_GPMC_BASE /* 0x6E000000 */
+#define OMAP34XX_GPMC_VIRT	0xFE000000
+#define OMAP34XX_GPMC_SIZE	SZ_1M
+
+#define OMAP343X_SMS_PHYS	OMAP343X_SMS_BASE /* 0x6C000000 */
+#define OMAP343X_SMS_VIRT	0xFC000000
+#define OMAP343X_SMS_SIZE	SZ_1M
+
+#define OMAP343X_SDRC_PHYS	OMAP343X_SDRC_BASE /* 0x6D000000 */
+#define OMAP343X_SDRC_VIRT	0xFD000000
+#define OMAP343X_SDRC_SIZE	SZ_1M
+
+
+#define IO_OFFSET		0x90000000
+#define IO_ADDRESS(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_p2v(pa)		((pa) + IO_OFFSET)/* Works for L3 and L4 */
+#define io_v2p(va)		((va) - IO_OFFSET)/* Works for L3 and L4 */
+
+/* DSP */
+#define DSP_MEM_34XX_PHYS	OMAP34XX_DSP_MEM_BASE	/* 0x58000000 */
+#define DSP_MEM_34XX_VIRT	0xe0000000
+#define DSP_MEM_34XX_SIZE	0x28000
+#define DSP_IPI_34XX_PHYS	OMAP34XX_DSP_IPI_BASE	/* 0x59000000 */
+#define DSP_IPI_34XX_VIRT	0xe1000000
+#define DSP_IPI_34XX_SIZE	SZ_4K
+#define DSP_MMU_34XX_PHYS	OMAP34XX_DSP_MMU_BASE	/* 0x5a000000 */
+#define DSP_MMU_34XX_VIRT	0xe2000000
+#define DSP_MMU_34XX_SIZE	SZ_4K
+
 #endif
 
 #ifndef __ASSEMBLER__