Merge branch 'master' of /home/tglx/work/mtd/git/linux-2.6.git/

14 files changed, 406 insertions, 49 deletions

diff --git a/include/asm-arm/arch-pxa/akita.h b/include/asm-arm/arch-pxa/akita.h
new file mode 100644
index 000000000000..4a1fbcfccc39
--- /dev/null
+++ b/include/asm-arm/arch-pxa/akita.h
@@ -0,0 +1,30 @@
+/*
+ * Hardware specific definitions for SL-C1000 (Akita)
+ *
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+/* Akita IO Expander GPIOs */
+
+#define AKITA_IOEXP_RESERVED_7      (1 << 7)
+#define AKITA_IOEXP_IR_ON           (1 << 6)
+#define AKITA_IOEXP_AKIN_PULLUP     (1 << 5)
+#define AKITA_IOEXP_BACKLIGHT_CONT  (1 << 4)
+#define AKITA_IOEXP_BACKLIGHT_ON    (1 << 3)
+#define AKITA_IOEXP_MIC_BIAS        (1 << 2)
+#define AKITA_IOEXP_RESERVED_1      (1 << 1)
+#define AKITA_IOEXP_RESERVED_0      (1 << 0)
+
+/* Direction Bitfield  0=output  1=input */
+#define AKITA_IOEXP_IO_DIR	0
+/* Default Values */
+#define AKITA_IOEXP_IO_OUT	(AKITA_IOEXP_IR_ON | AKITA_IOEXP_AKIN_PULLUP)
+
+void akita_set_ioexp(struct device *dev, unsigned char bitmask);
+void akita_reset_ioexp(struct device *dev, unsigned char bitmask);
+
diff --git a/include/asm-arm/arch-pxa/corgi.h b/include/asm-arm/arch-pxa/corgi.h
index 324db06b5dd4..e554caa0d18b 100644
--- a/include/asm-arm/arch-pxa/corgi.h
+++ b/include/asm-arm/arch-pxa/corgi.h
@@ -103,18 +103,8 @@
  * Shared data structures
  */
 extern struct platform_device corgiscoop_device;
-
-/*
- * External Functions
- */
-extern unsigned long corgi_ssp_ads7846_putget(unsigned long);
-extern unsigned long corgi_ssp_ads7846_get(void);
-extern void corgi_ssp_ads7846_put(ulong data);
-extern void corgi_ssp_ads7846_lock(void);
-extern void corgi_ssp_ads7846_unlock(void);
-extern void corgi_ssp_lcdtg_send (u8 adrs, u8 data);
-extern void corgi_ssp_blduty_set(int duty);
-extern int corgi_ssp_max1111_get(ulong data);
+extern struct platform_device corgissp_device;
+extern struct platform_device corgifb_device;
 
 #endif /* __ASM_ARCH_CORGI_H  */
 
diff --git a/include/asm-arm/arch-pxa/hardware.h b/include/asm-arm/arch-pxa/hardware.h
index 72b04d846a23..3e70bd95472c 100644
--- a/include/asm-arm/arch-pxa/hardware.h
+++ b/include/asm-arm/arch-pxa/hardware.h
@@ -44,24 +44,12 @@
 
 #ifndef __ASSEMBLY__
 
-#if 0
 # define __REG(x)	(*((volatile u32 *)io_p2v(x)))
-#else
-/*
- * This __REG() version gives the same results as the one above,  except
- * that we are fooling gcc somehow so it generates far better and smaller
- * assembly code for access to contigous registers.  It's a shame that gcc
- * doesn't guess this by itself.
- */
-#include <asm/types.h>
-typedef struct { volatile u32 offset[4096]; } __regbase;
-# define __REGP(x)	((__regbase *)((x)&~4095))->offset[((x)&4095)>>2]
-# define __REG(x)	__REGP(io_p2v(x))
-#endif
 
 /* With indexed regs we don't want to feed the index through io_p2v()
    especially if it is a variable, otherwise horrible code will result. */
-# define __REG2(x,y)     (*(volatile u32 *)((u32)&__REG(x) + (y)))
+# define __REG2(x,y)	\
+	(*(volatile u32 *)((u32)&__REG(x) + (y)))
 
 # define __PREG(x)	(io_v2p((u32)&(x)))
 
diff --git a/include/asm-arm/arch-pxa/i2c.h b/include/asm-arm/arch-pxa/i2c.h
new file mode 100644
index 000000000000..46ec2243974a
--- /dev/null
+++ b/include/asm-arm/arch-pxa/i2c.h
@@ -0,0 +1,70 @@
+/*
+ *  i2c_pxa.h
+ *
+ *  Copyright (C) 2002 Intrinsyc Software Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ *
+ */
+#ifndef _I2C_PXA_H_
+#define _I2C_PXA_H_
+
+#if 0
+#define DEF_TIMEOUT             3
+#else
+/* need a longer timeout if we're dealing with the fact we may well be
+ * looking at a multi-master environment
+*/
+#define DEF_TIMEOUT             32
+#endif
+
+#define BUS_ERROR               (-EREMOTEIO)
+#define XFER_NAKED              (-ECONNREFUSED)
+#define I2C_RETRY               (-2000) /* an error has occurred retry transmit */
+
+/* ICR initialize bit values
+*
+*  15. FM       0 (100 Khz operation)
+*  14. UR       0 (No unit reset)
+*  13. SADIE    0 (Disables the unit from interrupting on slave addresses
+*                                       matching its slave address)
+*  12. ALDIE    0 (Disables the unit from interrupt when it loses arbitration
+*                                       in master mode)
+*  11. SSDIE    0 (Disables interrupts from a slave stop detected, in slave mode)
+*  10. BEIE     1 (Enable interrupts from detected bus errors, no ACK sent)
+*  9.  IRFIE    1 (Enable interrupts from full buffer received)
+*  8.  ITEIE    1 (Enables the I2C unit to interrupt when transmit buffer empty)
+*  7.  GCD      1 (Disables i2c unit response to general call messages as a slave)
+*  6.  IUE      0 (Disable unit until we change settings)
+*  5.  SCLE     1 (Enables the i2c clock output for master mode (drives SCL)
+*  4.  MA       0 (Only send stop with the ICR stop bit)
+*  3.  TB       0 (We are not transmitting a byte initially)
+*  2.  ACKNAK   0 (Send an ACK after the unit receives a byte)
+*  1.  STOP     0 (Do not send a STOP)
+*  0.  START    0 (Do not send a START)
+*
+*/
+#define I2C_ICR_INIT	(ICR_BEIE | ICR_IRFIE | ICR_ITEIE | ICR_GCD | ICR_SCLE)
+
+/* I2C status register init values
+ *
+ * 10. BED      1 (Clear bus error detected)
+ * 9.  SAD      1 (Clear slave address detected)
+ * 7.  IRF      1 (Clear IDBR Receive Full)
+ * 6.  ITE      1 (Clear IDBR Transmit Empty)
+ * 5.  ALD      1 (Clear Arbitration Loss Detected)
+ * 4.  SSD      1 (Clear Slave Stop Detected)
+ */
+#define I2C_ISR_INIT	0x7FF  /* status register init */
+
+struct i2c_slave_client;
+
+struct i2c_pxa_platform_data {
+	unsigned int		slave_addr;
+	struct i2c_slave_client	*slave;
+};
+
+extern void pxa_set_i2c_info(struct i2c_pxa_platform_data *info);
+#endif
diff --git a/include/asm-arm/arch-pxa/io.h b/include/asm-arm/arch-pxa/io.h
index c3bdbe44e21f..eb2dd58d397f 100644
--- a/include/asm-arm/arch-pxa/io.h
+++ b/include/asm-arm/arch-pxa/io.h
@@ -6,6 +6,8 @@
 #ifndef __ASM_ARM_ARCH_IO_H
 #define __ASM_ARM_ARCH_IO_H
 
+#include <asm/hardware.h>
+
 #define IO_SPACE_LIMIT 0xffffffff
 
 /*
diff --git a/include/asm-arm/arch-pxa/irda.h b/include/asm-arm/arch-pxa/irda.h
new file mode 100644
index 000000000000..748406f384c2
--- /dev/null
+++ b/include/asm-arm/arch-pxa/irda.h
@@ -0,0 +1,17 @@
+#ifndef ASMARM_ARCH_IRDA_H
+#define ASMARM_ARCH_IRDA_H
+
+/* board specific transceiver capabilities */
+
+#define IR_OFF		1
+#define IR_SIRMODE	2
+#define IR_FIRMODE	4
+
+struct pxaficp_platform_data {
+	int transceiver_cap;
+	void (*transceiver_mode)(struct device *dev, int mode);
+};
+
+extern void pxa_set_ficp_info(struct pxaficp_platform_data *info);
+
+#endif
diff --git a/include/asm-arm/arch-pxa/memory.h b/include/asm-arm/arch-pxa/memory.h
index 217a80b820ff..eaf6d43939e9 100644
--- a/include/asm-arm/arch-pxa/memory.h
+++ b/include/asm-arm/arch-pxa/memory.h
@@ -15,7 +15,7 @@
 /*
  * Physical DRAM offset.
  */
-#define PHYS_OFFSET	(0xa0000000UL)
+#define PHYS_OFFSET	UL(0xa0000000)
 
 /*
  * Virtual view <-> DMA view memory address translations
@@ -67,10 +67,6 @@
 #define LOCAL_MAP_NR(addr) \
 	(((unsigned long)(addr) & 0x03ffffff) >> PAGE_SHIFT)
 
-#else
-
-#define PFN_TO_NID(addr)	(0)
-
 #endif
 
 #endif
diff --git a/include/asm-arm/arch-pxa/mmc.h b/include/asm-arm/arch-pxa/mmc.h
index 7492ea7ea614..88c17dd02ed2 100644
--- a/include/asm-arm/arch-pxa/mmc.h
+++ b/include/asm-arm/arch-pxa/mmc.h
@@ -9,7 +9,9 @@ struct mmc_host;
 
 struct pxamci_platform_data {
 	unsigned int ocr_mask;			/* available voltages */
+	unsigned long detect_delay;		/* delay in jiffies before detecting cards after interrupt */
 	int (*init)(struct device *, irqreturn_t (*)(int, void *, struct pt_regs *), void *);
+	int (*get_ro)(struct device *);
 	void (*setpower)(struct device *, unsigned int);
 	void (*exit)(struct device *, void *);
 };
diff --git a/include/asm-arm/arch-pxa/poodle.h b/include/asm-arm/arch-pxa/poodle.h
index 58bda9d571a5..6b5ac5144e70 100644
--- a/include/asm-arm/arch-pxa/poodle.h
+++ b/include/asm-arm/arch-pxa/poodle.h
@@ -37,24 +37,25 @@
 #define POODLE_GPIO_nSD_DETECT		(9)
 #define POODLE_GPIO_MAIN_BAT_LOW	(13)
 #define POODLE_GPIO_BAT_COVER		(13)
+#define POODLE_GPIO_USB_PULLUP		(20)
 #define POODLE_GPIO_ADC_TEMP_ON		(21)
 #define POODLE_GPIO_BYPASS_ON		(36)
 #define POODLE_GPIO_CHRG_ON		(38)
 #define POODLE_GPIO_CHRG_FULL		(16)
 
 /* PXA GPIOs */
-#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO0
-#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO1
-#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO4
-#define POODLE_IRQ_GPIO_CO		IRQ_GPIO16
-#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO5
-#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO11
-#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO10
-#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO17
-#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO14
-#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO8
-#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO9
-#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO13
+#define POODLE_IRQ_GPIO_ON_KEY		IRQ_GPIO(0)
+#define POODLE_IRQ_GPIO_AC_IN		IRQ_GPIO(1)
+#define POODLE_IRQ_GPIO_HP_IN		IRQ_GPIO(4)
+#define POODLE_IRQ_GPIO_CO		IRQ_GPIO(16)
+#define POODLE_IRQ_GPIO_TP_INT		IRQ_GPIO(5)
+#define POODLE_IRQ_GPIO_WAKEUP		IRQ_GPIO(11)
+#define POODLE_IRQ_GPIO_GA_INT		IRQ_GPIO(10)
+#define POODLE_IRQ_GPIO_CF_IRQ		IRQ_GPIO(17)
+#define POODLE_IRQ_GPIO_CF_CD		IRQ_GPIO(14)
+#define POODLE_IRQ_GPIO_nSD_INT		IRQ_GPIO(8)
+#define POODLE_IRQ_GPIO_nSD_DETECT	IRQ_GPIO(9)
+#define POODLE_IRQ_GPIO_MAIN_BAT_LOW	IRQ_GPIO(13)
 
 /* SCOOP GPIOs */
 #define POODLE_SCOOP_CHARGE_ON	SCOOP_GPCR_PA11
diff --git a/include/asm-arm/arch-pxa/pxa-regs.h b/include/asm-arm/arch-pxa/pxa-regs.h
index 51f0fe0ac165..a75a2470f4f5 100644
--- a/include/asm-arm/arch-pxa/pxa-regs.h
+++ b/include/asm-arm/arch-pxa/pxa-regs.h
@@ -126,8 +126,8 @@
 #define DRCMR12		__REG(0x40000130)  /* Request to Channel Map Register for AC97 audio transmit Request */
 #define DRCMR13		__REG(0x40000134)  /* Request to Channel Map Register for SSP receive Request */
 #define DRCMR14		__REG(0x40000138)  /* Request to Channel Map Register for SSP transmit Request */
-#define DRCMR15		__REG(0x4000013c)  /* Reserved */
-#define DRCMR16		__REG(0x40000140)  /* Reserved */
+#define DRCMR15		__REG(0x4000013c)  /* Request to Channel Map Register for SSP2 receive Request */
+#define DRCMR16		__REG(0x40000140)  /* Request to Channel Map Register for SSP2 transmit Request */
 #define DRCMR17		__REG(0x40000144)  /* Request to Channel Map Register for ICP receive Request */
 #define DRCMR18		__REG(0x40000148)  /* Request to Channel Map Register for ICP transmit Request */
 #define DRCMR19		__REG(0x4000014c)  /* Request to Channel Map Register for STUART receive Request */
@@ -151,7 +151,8 @@
 #define DRCMR37		__REG(0x40000194)  /* Request to Channel Map Register for USB endpoint 13 Request */
 #define DRCMR38		__REG(0x40000198)  /* Request to Channel Map Register for USB endpoint 14 Request */
 #define DRCMR39		__REG(0x4000019C)  /* Reserved */
-
+#define DRCMR66		__REG(0x40001108)  /* Request to Channel Map Register for SSP3 receive Request */
+#define DRCMR67		__REG(0x4000110C)  /* Request to Channel Map Register for SSP3 transmit Request */
 #define DRCMR68		__REG(0x40001110)  /* Request to Channel Map Register for Camera FIFO 0 Request */
 #define DRCMR69		__REG(0x40001114)  /* Request to Channel Map Register for Camera FIFO 1 Request */
 #define DRCMR70		__REG(0x40001118)  /* Request to Channel Map Register for Camera FIFO 2 Request */
@@ -325,6 +326,25 @@
 #define STDLL		__REG(0x40700000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
 #define STDLH		__REG(0x40700004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
 
+/* Hardware UART (HWUART) */
+#define HWUART		HWRBR
+#define HWRBR		__REG(0x41600000)  /* Receive Buffer Register (read only) */
+#define HWTHR		__REG(0x41600000)  /* Transmit Holding Register (write only) */
+#define HWIER		__REG(0x41600004)  /* Interrupt Enable Register (read/write) */
+#define HWIIR		__REG(0x41600008)  /* Interrupt ID Register (read only) */
+#define HWFCR		__REG(0x41600008)  /* FIFO Control Register (write only) */
+#define HWLCR		__REG(0x4160000C)  /* Line Control Register (read/write) */
+#define HWMCR		__REG(0x41600010)  /* Modem Control Register (read/write) */
+#define HWLSR		__REG(0x41600014)  /* Line Status Register (read only) */
+#define HWMSR		__REG(0x41600018)  /* Modem Status Register (read only) */
+#define HWSPR		__REG(0x4160001C)  /* Scratch Pad Register (read/write) */
+#define HWISR		__REG(0x41600020)  /* Infrared Selection Register (read/write) */
+#define HWFOR		__REG(0x41600024)  /* Receive FIFO Occupancy Register (read only) */
+#define HWABR		__REG(0x41600028)  /* Auto-Baud Control Register (read/write) */
+#define HWACR		__REG(0x4160002C)  /* Auto-Baud Count Register (read only) */
+#define HWDLL		__REG(0x41600000)  /* Divisor Latch Low Register (DLAB = 1) (read/write) */
+#define HWDLH		__REG(0x41600004)  /* Divisor Latch High Register (DLAB = 1) (read/write) */
+
 #define IER_DMAE	(1 << 7)	/* DMA Requests Enable */
 #define IER_UUE		(1 << 6)	/* UART Unit Enable */
 #define IER_NRZE	(1 << 5)	/* NRZ coding Enable */
@@ -652,7 +672,7 @@
 
 #define UDCCS_IO_RFS	(1 << 0)	/* Receive FIFO service */
 #define UDCCS_IO_RPC	(1 << 1)	/* Receive packet complete */
-#define UDCCS_IO_ROF	(1 << 3)	/* Receive overflow */
+#define UDCCS_IO_ROF	(1 << 2)	/* Receive overflow */
 #define UDCCS_IO_DME	(1 << 3)	/* DMA enable */
 #define UDCCS_IO_RNE	(1 << 6)	/* Receive FIFO not empty */
 #define UDCCS_IO_RSP	(1 << 7)	/* Receive short packet */
@@ -818,6 +838,23 @@
 #define UDCOTGICR_IEIDF	(1 << 0)	/* OTG ID Change Falling Edge
 					   Interrupt Enable */
 
+#define UP2OCR		  __REG(0x40600020)  /* USB Port 2 Output Control register */
+
+#define UP2OCR_CPVEN	(1 << 0)	/* Charge Pump Vbus Enable */
+#define UP2OCR_CPVPE	(1 << 1)	/* Charge Pump Vbus Pulse Enable */
+#define UP2OCR_DPPDE	(1 << 2)	/* Host Port 2 Transceiver D+ Pull Down Enable */
+#define UP2OCR_DMPDE	(1 << 3)	/* Host Port 2 Transceiver D- Pull Down Enable */
+#define UP2OCR_DPPUE	(1 << 4)	/* Host Port 2 Transceiver D+ Pull Up Enable */
+#define UP2OCR_DMPUE	(1 << 5)	/* Host Port 2 Transceiver D- Pull Up Enable */
+#define UP2OCR_DPPUBE	(1 << 6)	/* Host Port 2 Transceiver D+ Pull Up Bypass Enable */
+#define UP2OCR_DMPUBE	(1 << 7)	/* Host Port 2 Transceiver D- Pull Up Bypass Enable */
+#define UP2OCR_EXSP		(1 << 8)	/* External Transceiver Speed Control */
+#define UP2OCR_EXSUS	(1 << 9)	/* External Transceiver Speed Enable */
+#define UP2OCR_IDON		(1 << 10)	/* OTG ID Read Enable */
+#define UP2OCR_HXS		(1 << 16)	/* Host Port 2 Transceiver Output Select */
+#define UP2OCR_HXOE		(1 << 17)	/* Host Port 2 Transceiver Output Enable */
+#define UP2OCR_SEOS		(1 << 24)	/* Single-Ended Output Select */
+
 #define UDCCSN(x)	__REG2(0x40600100, (x) << 2)
 #define UDCCSR0         __REG(0x40600100) /* UDC Control/Status register - Endpoint 0 */
 #define UDCCSR0_SA	(1 << 7)	/* Setup Active */
@@ -995,14 +1032,12 @@
 #define ICCR0_LBM	(1 << 1)	/* Loopback mode */
 #define ICCR0_ITR	(1 << 0)	/* IrDA transmission */
 
-#ifdef CONFIG_PXA27x
 #define ICCR2_RXP       (1 << 3)	/* Receive Pin Polarity select */
 #define ICCR2_TXP       (1 << 2)	/* Transmit Pin Polarity select */
 #define ICCR2_TRIG	(3 << 0)	/* Receive FIFO Trigger threshold */
 #define ICCR2_TRIG_8    (0 << 0)	/* 	>= 8 bytes */
 #define ICCR2_TRIG_16   (1 << 0)	/*	>= 16 bytes */
 #define ICCR2_TRIG_32   (2 << 0)	/*	>= 32 bytes */
-#endif
 
 #ifdef CONFIG_PXA27x
 #define ICSR0_EOC	(1 << 6)	/* DMA End of Descriptor Chain */
@@ -1232,9 +1267,13 @@
 #define GPIO40_FFDTR		40	/* FFUART data terminal Ready */
 #define GPIO41_FFRTS		41	/* FFUART request to send */
 #define GPIO42_BTRXD		42	/* BTUART receive data */
+#define GPIO42_HWRXD		42	/* HWUART receive data */
 #define GPIO43_BTTXD		43	/* BTUART transmit data */
+#define GPIO43_HWTXD		43	/* HWUART transmit data */
 #define GPIO44_BTCTS		44	/* BTUART clear to send */
+#define GPIO44_HWCTS		44	/* HWUART clear to send */
 #define GPIO45_BTRTS		45	/* BTUART request to send */
+#define GPIO45_HWRTS		45	/* HWUART request to send */
 #define GPIO45_AC97_SYSCLK	45	/* AC97 System Clock */
 #define GPIO46_ICPRXD		46	/* ICP receive data */
 #define GPIO46_STRXD		46	/* STD_UART receive data */
@@ -1360,17 +1399,26 @@
 #define GPIO40_FFDTR_MD		(40 | GPIO_ALT_FN_2_OUT)
 #define GPIO41_FFRTS_MD		(41 | GPIO_ALT_FN_2_OUT)
 #define GPIO42_BTRXD_MD		(42 | GPIO_ALT_FN_1_IN)
+#define GPIO42_HWRXD_MD		(42 | GPIO_ALT_FN_3_IN)
 #define GPIO43_BTTXD_MD		(43 | GPIO_ALT_FN_2_OUT)
+#define GPIO43_HWTXD_MD		(43 | GPIO_ALT_FN_3_OUT)
 #define GPIO44_BTCTS_MD		(44 | GPIO_ALT_FN_1_IN)
+#define GPIO44_HWCTS_MD		(44 | GPIO_ALT_FN_3_IN)
 #define GPIO45_BTRTS_MD		(45 | GPIO_ALT_FN_2_OUT)
+#define GPIO45_HWRTS_MD		(45 | GPIO_ALT_FN_3_OUT)
 #define GPIO45_SYSCLK_AC97_MD		(45 | GPIO_ALT_FN_1_OUT)
 #define GPIO46_ICPRXD_MD	(46 | GPIO_ALT_FN_1_IN)
 #define GPIO46_STRXD_MD		(46 | GPIO_ALT_FN_2_IN)
 #define GPIO47_ICPTXD_MD	(47 | GPIO_ALT_FN_2_OUT)
 #define GPIO47_STTXD_MD		(47 | GPIO_ALT_FN_1_OUT)
 #define GPIO48_nPOE_MD		(48 | GPIO_ALT_FN_2_OUT)
+#define GPIO48_HWTXD_MD         (48 | GPIO_ALT_FN_1_OUT)
+#define GPIO48_nPOE_MD          (48 | GPIO_ALT_FN_2_OUT)
+#define GPIO49_HWRXD_MD		(49 | GPIO_ALT_FN_1_IN)
 #define GPIO49_nPWE_MD		(49 | GPIO_ALT_FN_2_OUT)
 #define GPIO50_nPIOR_MD		(50 | GPIO_ALT_FN_2_OUT)
+#define GPIO50_HWCTS_MD         (50 | GPIO_ALT_FN_1_IN)
+#define GPIO51_HWRTS_MD         (51 | GPIO_ALT_FN_1_OUT)
 #define GPIO51_nPIOW_MD		(51 | GPIO_ALT_FN_2_OUT)
 #define GPIO52_nPCE_1_MD	(52 | GPIO_ALT_FN_2_OUT)
 #define GPIO53_nPCE_2_MD	(53 | GPIO_ALT_FN_2_OUT)
@@ -1423,6 +1471,7 @@
 #define GPIO84_NSSP_RX      	(84 | GPIO_ALT_FN_2_IN)
 #define GPIO85_nPCE_1_MD	(85 | GPIO_ALT_FN_1_OUT)
 #define GPIO92_MMCDAT0_MD	(92 | GPIO_ALT_FN_1_OUT)
+#define GPIO104_pSKTSEL_MD	(104 | GPIO_ALT_FN_1_OUT)
 #define GPIO109_MMCDAT1_MD	(109 | GPIO_ALT_FN_1_OUT)
 #define GPIO110_MMCDAT2_MD	(110 | GPIO_ALT_FN_1_OUT)
 #define GPIO110_MMCCS0_MD	(110 | GPIO_ALT_FN_1_OUT)
@@ -1510,6 +1559,8 @@
 #define PSSR_BFS	(1 << 1)	/* Battery Fault Status */
 #define PSSR_SSS	(1 << 0)	/* Software Sleep Status */
 
+#define PSLR_SL_ROD	(1 << 20)	/* Sleep-Mode/Depp-Sleep Mode nRESET_OUT Disable */
+
 #define PCFR_RO		(1 << 15)	/* RDH Override */
 #define PCFR_PO		(1 << 14)	/* PH Override */
 #define PCFR_GPROD	(1 << 12)	/* GPIO nRESET_OUT Disable */
@@ -1517,6 +1568,7 @@
 #define PCFR_FVC	(1 << 10)	/* Frequency/Voltage Change */
 #define PCFR_DC_EN	(1 << 7)	/* Sleep/deep-sleep DC-DC Converter Enable */
 #define PCFR_PI2CEN	(1 << 6)	/* Enable PI2C controller */
+#define PCFR_GPR_EN	(1 << 4)	/* nRESET_GPIO Pin Enable */
 #define PCFR_DS		(1 << 3)	/* Deep Sleep Mode */
 #define PCFR_FS		(1 << 2)	/* Float Static Chip Selects */
 #define PCFR_FP		(1 << 1)	/* Float PCMCIA controls */
@@ -1741,6 +1793,7 @@
 #define CKEN7_BTUART	(1 << 7)	/* BTUART Unit Clock Enable */
 #define CKEN6_FFUART	(1 << 6)	/* FFUART Unit Clock Enable */
 #define CKEN5_STUART	(1 << 5)	/* STUART Unit Clock Enable */
+#define CKEN4_HWUART	(1 << 4)	/* HWUART Unit Clock Enable */
 #define CKEN4_SSP3	(1 << 4)	/* SSP3 Unit Clock Enable */
 #define CKEN3_SSP	(1 << 3)	/* SSP Unit Clock Enable */
 #define CKEN3_SSP2	(1 << 3)	/* SSP2 Unit Clock Enable */
@@ -1810,6 +1863,11 @@
 #define LCCR0_PDD_S	12
 #define LCCR0_BM	(1 << 20) 	/* Branch mask */
 #define LCCR0_OUM	(1 << 21)	/* Output FIFO underrun mask */
+#define LCCR0_LCDT      (1 << 22)       /* LCD panel type */
+#define LCCR0_RDSTM     (1 << 23)       /* Read status interrupt mask */
+#define LCCR0_CMDIM     (1 << 24)       /* Command interrupt mask */
+#define LCCR0_OUC       (1 << 25)       /* Overlay Underlay control bit */
+#define LCCR0_LDDALT    (1 << 26)       /* LDD alternate mapping control */
 
 #define LCCR1_PPL       Fld (10, 0)      /* Pixels Per Line - 1 */
 #define LCCR1_DisWdth(Pixel)            /* Display Width [1..800 pix.]  */ \
@@ -2062,7 +2120,10 @@
 #define UHCFMN		__REG(0x4C00003C) /* UHC Frame Number */
 #define UHCPERS		__REG(0x4C000040) /* UHC Periodic Start */
 #define UHCLS		__REG(0x4C000044) /* UHC Low Speed Threshold */
+
 #define UHCRHDA		__REG(0x4C000048) /* UHC Root Hub Descriptor A */
+#define UHCRHDA_NOCP	(1 << 12)	/* No over current protection */
+
 #define UHCRHDB		__REG(0x4C00004C) /* UHC Root Hub Descriptor B */
 #define UHCRHS		__REG(0x4C000050) /* UHC Root Hub Status */
 #define UHCRHPS1	__REG(0x4C000054) /* UHC Root Hub Port 1 Status */
@@ -2252,4 +2313,11 @@
 
 #endif
 
+/* PWRMODE register M field values */
+
+#define PWRMODE_IDLE		0x1
+#define PWRMODE_STANDBY		0x2
+#define PWRMODE_SLEEP		0x3
+#define PWRMODE_DEEPSLEEP	0x7
+
 #endif
diff --git a/include/asm-arm/arch-pxa/pxafb.h b/include/asm-arm/arch-pxa/pxafb.h
index 27d71e9d413b..aba9b30f4249 100644
--- a/include/asm-arm/arch-pxa/pxafb.h
+++ b/include/asm-arm/arch-pxa/pxafb.h
@@ -66,3 +66,5 @@ struct pxafb_mach_info {
 
 };
 void set_pxa_fb_info(struct pxafb_mach_info *hard_pxa_fb_info);
+void set_pxa_fb_parent(struct device *parent_dev);
+unsigned long pxafb_get_hsync_time(struct device *dev);
diff --git a/include/asm-arm/arch-pxa/sharpsl.h b/include/asm-arm/arch-pxa/sharpsl.h
new file mode 100644
index 000000000000..311f2bb5386a
--- /dev/null
+++ b/include/asm-arm/arch-pxa/sharpsl.h
@@ -0,0 +1,32 @@
+/*
+ * SharpSL SSP Driver
+ */
+
+unsigned long corgi_ssp_ads7846_putget(unsigned long);
+unsigned long corgi_ssp_ads7846_get(void);
+void corgi_ssp_ads7846_put(unsigned long data);
+void corgi_ssp_ads7846_lock(void);
+void corgi_ssp_ads7846_unlock(void);
+void corgi_ssp_lcdtg_send (unsigned char adrs, unsigned char data);
+void corgi_ssp_blduty_set(int duty);
+int corgi_ssp_max1111_get(unsigned long data);
+
+/*
+ * SharpSL Touchscreen Driver
+ */
+
+struct corgits_machinfo {
+	unsigned long (*get_hsync_len)(void);
+	void (*put_hsync)(void);
+	void (*wait_hsync)(void);
+};
+
+/*
+ * SharpSL Backlight
+ */
+
+struct corgibl_machinfo {
+	int max_intensity;
+	void (*set_bl_intensity)(int intensity);
+};
+
diff --git a/include/asm-arm/arch-pxa/spitz.h b/include/asm-arm/arch-pxa/spitz.h
new file mode 100644
index 000000000000..62e1fe4d025f
--- /dev/null
+++ b/include/asm-arm/arch-pxa/spitz.h
@@ -0,0 +1,158 @@
+/*
+ * Hardware specific definitions for SL-Cx000 series of PDAs
+ *
+ * Copyright (c) 2005 Alexander Wykes
+ * Copyright (c) 2005 Richard Purdie
+ *
+ * Based on Sharp's 2.4 kernel patches
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+#ifndef __ASM_ARCH_SPITZ_H
+#define __ASM_ARCH_SPITZ_H  1
+#endif
+
+/* Spitz/Akita GPIOs */
+
+#define SPITZ_GPIO_KEY_INT         (0) /* Key Interrupt */
+#define SPITZ_GPIO_RESET           (1)
+#define SPITZ_GPIO_nSD_DETECT      (9)
+#define SPITZ_GPIO_TP_INT          (11) /* Touch Panel interrupt */
+#define SPITZ_GPIO_AK_INT          (13) /* Remote Control */
+#define SPITZ_GPIO_ADS7846_CS      (14)
+#define SPITZ_GPIO_SYNC            (16)
+#define SPITZ_GPIO_MAX1111_CS      (20)
+#define SPITZ_GPIO_FATAL_BAT       (21)
+#define SPITZ_GPIO_HSYNC           (22)
+#define SPITZ_GPIO_nSD_CLK         (32)
+#define SPITZ_GPIO_USB_DEVICE      (35)
+#define SPITZ_GPIO_USB_HOST        (37)
+#define SPITZ_GPIO_USB_CONNECT     (41)
+#define SPITZ_GPIO_LCDCON_CS       (53)
+#define SPITZ_GPIO_nPCE            (54)
+#define SPITZ_GPIO_nSD_WP          (81)
+#define SPITZ_GPIO_ON_RESET        (89)
+#define SPITZ_GPIO_BAT_COVER       (90)
+#define SPITZ_GPIO_CF_CD           (94)
+#define SPITZ_GPIO_ON_KEY          (95)
+#define SPITZ_GPIO_SWA             (97)
+#define SPITZ_GPIO_SWB             (96)
+#define SPITZ_GPIO_CHRG_FULL       (101)
+#define SPITZ_GPIO_CO              (101)
+#define SPITZ_GPIO_CF_IRQ          (105)
+#define SPITZ_GPIO_AC_IN           (115)
+#define SPITZ_GPIO_HP_IN           (116)
+
+/* Spitz Only GPIOs */
+
+#define SPITZ_GPIO_CF2_IRQ         (106) /* CF slot1 Ready */
+#define SPITZ_GPIO_CF2_CD          (93)
+
+
+/* Spitz/Akita Keyboard Definitions */
+
+#define SPITZ_KEY_STROBE_NUM         (11)
+#define SPITZ_KEY_SENSE_NUM          (7)
+#define SPITZ_GPIO_G0_STROBE_BIT     0x0f800000
+#define SPITZ_GPIO_G1_STROBE_BIT     0x00100000
+#define SPITZ_GPIO_G2_STROBE_BIT     0x01000000
+#define SPITZ_GPIO_G3_STROBE_BIT     0x00041880
+#define SPITZ_GPIO_G0_SENSE_BIT      0x00021000
+#define SPITZ_GPIO_G1_SENSE_BIT      0x000000d4
+#define SPITZ_GPIO_G2_SENSE_BIT      0x08000000
+#define SPITZ_GPIO_G3_SENSE_BIT      0x00000000
+
+#define SPITZ_GPIO_KEY_STROBE0       88
+#define SPITZ_GPIO_KEY_STROBE1       23
+#define SPITZ_GPIO_KEY_STROBE2       24
+#define SPITZ_GPIO_KEY_STROBE3       25
+#define SPITZ_GPIO_KEY_STROBE4       26
+#define SPITZ_GPIO_KEY_STROBE5       27
+#define SPITZ_GPIO_KEY_STROBE6       52
+#define SPITZ_GPIO_KEY_STROBE7       103
+#define SPITZ_GPIO_KEY_STROBE8       107
+#define SPITZ_GPIO_KEY_STROBE9       108
+#define SPITZ_GPIO_KEY_STROBE10      114
+
+#define SPITZ_GPIO_KEY_SENSE0        12
+#define SPITZ_GPIO_KEY_SENSE1        17
+#define SPITZ_GPIO_KEY_SENSE2        91
+#define SPITZ_GPIO_KEY_SENSE3        34
+#define SPITZ_GPIO_KEY_SENSE4        36
+#define SPITZ_GPIO_KEY_SENSE5        38
+#define SPITZ_GPIO_KEY_SENSE6        39
+
+
+/* Spitz Scoop Device (No. 1) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP_LED_GREEN     SCOOP_GPCR_PA11  /* Keep */
+#define SPITZ_SCP_JK_B          SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP_CHRG_ON       SCOOP_GPCR_PA13  /* Keep */
+#define SPITZ_SCP_MUTE_L        SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP_MUTE_R        SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP_CF_POWER      SCOOP_GPCR_PA16  /* Keep */
+#define SPITZ_SCP_LED_ORANGE    SCOOP_GPCR_PA17  /* Keep */
+#define SPITZ_SCP_JK_A          SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP_ADC_TEMP_ON   SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP_IO_DIR      (SPITZ_SCP_LED_GREEN | SPITZ_SCP_JK_B | SPITZ_SCP_CHRG_ON | \
+                               SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_LED_ORANGE | \
+                               SPITZ_SCP_CF_POWER | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_IO_OUT      (SPITZ_SCP_CHRG_ON | SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R)
+#define SPITZ_SCP_SUS_CLR     (SPITZ_SCP_MUTE_L | SPITZ_SCP_MUTE_R | SPITZ_SCP_JK_A | SPITZ_SCP_ADC_TEMP_ON)
+#define SPITZ_SCP_SUS_SET     0
+
+/* Spitz Scoop Device (No. 2) GPIOs */
+/* Suspend States in comments */
+#define SPITZ_SCP2_IR_ON           SCOOP_GPCR_PA11  /* High */
+#define SPITZ_SCP2_AKIN_PULLUP     SCOOP_GPCR_PA12  /* Keep */
+#define SPITZ_SCP2_RESERVED_1      SCOOP_GPCR_PA13  /* High */
+#define SPITZ_SCP2_RESERVED_2      SCOOP_GPCR_PA14  /* Low */
+#define SPITZ_SCP2_RESERVED_3      SCOOP_GPCR_PA15  /* Low */
+#define SPITZ_SCP2_RESERVED_4      SCOOP_GPCR_PA16  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_CONT  SCOOP_GPCR_PA17  /* Low */
+#define SPITZ_SCP2_BACKLIGHT_ON    SCOOP_GPCR_PA18  /* Low */
+#define SPITZ_SCP2_MIC_BIAS        SCOOP_GPCR_PA19  /* Low */
+
+#define SPITZ_SCP2_IO_DIR (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1 | \
+                           SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                           SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+
+#define SPITZ_SCP2_IO_OUT   (SPITZ_SCP2_IR_ON | SPITZ_SCP2_AKIN_PULLUP | SPITZ_SCP2_RESERVED_1)
+#define SPITZ_SCP2_SUS_CLR  (SPITZ_SCP2_RESERVED_2 | SPITZ_SCP2_RESERVED_3 | SPITZ_SCP2_RESERVED_4 | \
+                             SPITZ_SCP2_BACKLIGHT_CONT | SPITZ_SCP2_BACKLIGHT_ON | SPITZ_SCP2_MIC_BIAS)
+#define SPITZ_SCP2_SUS_SET  (SPITZ_SCP2_IR_ON | SPITZ_SCP2_RESERVED_1)
+
+
+/* Spitz IRQ Definitions */
+
+#define SPITZ_IRQ_GPIO_KEY_INT        IRQ_GPIO(SPITZ_GPIO_KEY_INT)
+#define SPITZ_IRQ_GPIO_AC_IN          IRQ_GPIO(SPITZ_GPIO_AC_IN)
+#define SPITZ_IRQ_GPIO_AK_INT         IRQ_GPIO(SPITZ_GPIO_AK_INT)
+#define SPITZ_IRQ_GPIO_HP_IN          IRQ_GPIO(SPITZ_GPIO_HP_IN)
+#define SPITZ_IRQ_GPIO_TP_INT         IRQ_GPIO(SPITZ_GPIO_TP_INT)
+#define SPITZ_IRQ_GPIO_SYNC           IRQ_GPIO(SPITZ_GPIO_SYNC)
+#define SPITZ_IRQ_GPIO_ON_KEY         IRQ_GPIO(SPITZ_GPIO_ON_KEY)
+#define SPITZ_IRQ_GPIO_SWA            IRQ_GPIO(SPITZ_GPIO_SWA)
+#define SPITZ_IRQ_GPIO_SWB            IRQ_GPIO(SPITZ_GPIO_SWB)
+#define SPITZ_IRQ_GPIO_BAT_COVER      IRQ_GPIO(SPITZ_GPIO_BAT_COVER)
+#define SPITZ_IRQ_GPIO_FATAL_BAT      IRQ_GPIO(SPITZ_GPIO_FATAL_BAT)
+#define SPITZ_IRQ_GPIO_CO             IRQ_GPIO(SPITZ_GPIO_CO)
+#define SPITZ_IRQ_GPIO_CF_IRQ         IRQ_GPIO(SPITZ_GPIO_CF_IRQ)
+#define SPITZ_IRQ_GPIO_CF_CD          IRQ_GPIO(SPITZ_GPIO_CF_CD)
+#define SPITZ_IRQ_GPIO_CF2_IRQ        IRQ_GPIO(SPITZ_GPIO_CF2_IRQ)
+#define SPITZ_IRQ_GPIO_nSD_INT        IRQ_GPIO(SPITZ_GPIO_nSD_INT)
+#define SPITZ_IRQ_GPIO_nSD_DETECT     IRQ_GPIO(SPITZ_GPIO_nSD_DETECT)
+
+/*
+ * Shared data structures
+ */
+extern struct platform_device spitzscoop_device;
+extern struct platform_device spitzscoop2_device;
+extern struct platform_device spitzssp_device;
+extern struct sharpsl_charger_machinfo spitz_pm_machinfo;
+
+extern void spitz_lcd_power(int on);
diff --git a/include/asm-arm/arch-pxa/uncompress.h b/include/asm-arm/arch-pxa/uncompress.h
index 4428d3eb7432..fe38090444e0 100644
--- a/include/asm-arm/arch-pxa/uncompress.h
+++ b/include/asm-arm/arch-pxa/uncompress.h
@@ -12,6 +12,7 @@
 #define FFUART		((volatile unsigned long *)0x40100000)
 #define BTUART		((volatile unsigned long *)0x40200000)
 #define STUART		((volatile unsigned long *)0x40700000)
+#define HWUART		((volatile unsigned long *)0x41600000)
 
 #define UART		FFUART