Merge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6

12 files changed, 437 insertions, 535 deletions

diff --git a/include/asm-blackfin/mach-bf548/anomaly.h b/include/asm-blackfin/mach-bf548/anomaly.h
index aca1d4ba145c..c5b63759cdee 100644
--- a/include/asm-blackfin/mach-bf548/anomaly.h
+++ b/include/asm-blackfin/mach-bf548/anomaly.h
@@ -1,74 +1,85 @@
-
 /*
- * File:         include/asm-blackfin/mach-bf548/anomaly.h
- * Based on:
- * Author:
- *
- * Created:
- * Description:
- *
- * Rev:
- *
- * Modified:
- *
- *
- * Bugs:         Enter bugs at http://blackfin.uclinux.org/
+ * File: include/asm-blackfin/mach-bf548/anomaly.h
+ * Bugs: Enter bugs at http://blackfin.uclinux.org/
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; see the file COPYING.
- * If not, write to the Free Software Foundation,
- * 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ * Copyright (C) 2004-2007 Analog Devices Inc.
+ * Licensed under the GPL-2 or later.
+ */
+
+/* This file shoule be up to date with:
+ *  - Revision C, July 16, 2007; ADSP-BF549 Silicon Anomaly List
  */
 
 #ifndef _MACH_ANOMALY_H_
 #define _MACH_ANOMALY_H_
-#define ANOMALY_05000074 /* A multi issue instruction with dsp32shiftimm in
-			    slot1 and store of a P register in slot 2 is not
-			    supported */
-#define ANOMALY_05000119 /* DMA_RUN bit is not valid after a Peripheral Receive
-			    Channel DMA stops */
-#define ANOMALY_05000122 /* Rx.H can not be used to access 16-bit System MMR
-			    registers. */
-#define ANOMALY_05000245 /* Spurious Hardware Error from an Access in the
-			    Shadow of a Conditional Branch */
-#define ANOMALY_05000255 /* Entering Hibernate Mode with RTC Seconds event
-			    interrupt not functional */
-#define ANOMALY_05000265 /* Sensitivity to noise with slow input edge rates on
-			    SPORT external receive and transmit clocks. */
-#define ANOMALY_05000272 /* Certain data cache write through modes fail for
-			    VDDint <=0.9V */
-#define ANOMALY_05000281 /* False Hardware Error Exception when ISR context is
-			    not restored */
-#define ANOMALY_05000310 /* False Hardware Errors Caused by Fetches at the
-			    Boundary of Reserved Memory */
-#define ANOMALY_05000312 /* Errors When SSYNC, CSYNC, or Loads to LT, LB and
-			    LC Registers Are Interrupted */
-#define ANOMALY_05000324 /* TWI Slave Boot Mode Is Not Functional */
-#define ANOMALY_05000325 /* External FIFO Boot Mode Is Not Functional */
-#define ANOMALY_05000327 /* Data Lost When Core and DMA Accesses Are Made to
-			    the USB FIFO Simultaneously */
-#define ANOMALY_05000328 /* Incorrect Access of OTP_STATUS During otp_write()
-			    function */
-#define ANOMALY_05000329 /* Synchronous Burst Flash Boot Mode Is Not Functional
-			    */
-#define ANOMALY_05000330 /* Host DMA Boot Mode Is Not Functional */
-#define ANOMALY_05000334 /* Inadequate Timing Margins on DDR DQS to DQ and DQM
-			    Skew */
-#define ANOMALY_05000335 /* Inadequate Rotary Debounce Logic Duration */
-#define ANOMALY_05000336 /* Phantom Interrupt Occurs After First Configuration
-			    of Host DMA Port */
-#define ANOMALY_05000337 /* Disallowed Configuration Prevents Subsequent
-			    Allowed Configuration on Host DMA Port */
-#define ANOMALY_05000338 /* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
 
-#endif /* _MACH_ANOMALY_H_ */
+/* Multi-Issue Instruction with dsp32shiftimm in slot1 and P-reg Store in slot 2 Not Supported */
+#define ANOMALY_05000074 (1)
+/* DMA_RUN Bit Is Not Valid after a Peripheral Receive Channel DMA Stops */
+#define ANOMALY_05000119 (1)
+/* Rx.H Cannot Be Used to Access 16-bit System MMR Registers */
+#define ANOMALY_05000122 (1)
+/* Spurious Hardware Error from an Access in the Shadow of a Conditional Branch */
+#define ANOMALY_05000245 (1)
+/* Sensitivity To Noise with Slow Input Edge Rates on External SPORT TX and RX Clocks */
+#define ANOMALY_05000265 (1)
+/* Certain Data Cache Writethrough Modes Fail for Vddint <= 0.9V */
+#define ANOMALY_05000272 (1)
+/* False Hardware Error Exception when ISR context is not restored */
+#define ANOMALY_05000281 (1)
+/* SSYNCs After Writes To CAN/DMA MMR Registers Are Not Always Handled Correctly */
+#define ANOMALY_05000304 (1)
+/* False Hardware Errors Caused by Fetches at the Boundary of Reserved Memory */
+#define ANOMALY_05000310 (1)
+/* Errors When SSYNC, CSYNC, or Loads to LT, LB and LC Registers Are Interrupted */
+#define ANOMALY_05000312 (1)
+/* TWI Slave Boot Mode Is Not Functional */
+#define ANOMALY_05000324 (1)
+/* External FIFO Boot Mode Is Not Functional */
+#define ANOMALY_05000325 (1)
+/* Data Lost When Core and DMA Accesses Are Made to the USB FIFO Simultaneously */
+#define ANOMALY_05000327 (1)
+/* Incorrect Access of OTP_STATUS During otp_write() Function */
+#define ANOMALY_05000328 (1)
+/* Synchronous Burst Flash Boot Mode Is Not Functional */
+#define ANOMALY_05000329 (1)
+/* Host DMA Boot Mode Is Not Functional */
+#define ANOMALY_05000330 (1)
+/* Inadequate Timing Margins on DDR DQS to DQ and DQM Skew */
+#define ANOMALY_05000334 (1)
+/* Inadequate Rotary Debounce Logic Duration */
+#define ANOMALY_05000335 (1)
+/* Phantom Interrupt Occurs After First Configuration of Host DMA Port */
+#define ANOMALY_05000336 (1)
+/* Disallowed Configuration Prevents Subsequent Allowed Configuration on Host DMA Port */
+#define ANOMALY_05000337 (1)
+/* Slave-Mode SPI0 MISO Failure With CPHA = 0 */
+#define ANOMALY_05000338 (1)
+/* If Memory Reads Are Enabled on SDH or HOSTDP, Other DMAC1 Peripherals Cannot Read */
+#define ANOMALY_05000340 (1)
+/* Boot Host Wait (HWAIT) and Boot Host Wait Alternate (HWAITA) Signals Are Swapped */
+#define ANOMALY_05000344 (1)
+/* USB Calibration Value Is Not Intialized */
+#define ANOMALY_05000346 (1)
+/* Boot ROM Kernel Incorrectly Alters Reset Value of USB Register */
+#define ANOMALY_05000347 (1)
+/* Data Lost when Core Reads SDH Data FIFO */
+#define ANOMALY_05000349 (1)
+/* PLL Status Register Is Inaccurate */
+#define ANOMALY_05000351 (1)
+
+/* Anomalies that don't exist on this proc */
+#define ANOMALY_05000125 (0)
+#define ANOMALY_05000158 (0)
+#define ANOMALY_05000183 (0)
+#define ANOMALY_05000198 (0)
+#define ANOMALY_05000230 (0)
+#define ANOMALY_05000244 (0)
+#define ANOMALY_05000261 (0)
+#define ANOMALY_05000263 (0)
+#define ANOMALY_05000266 (0)
+#define ANOMALY_05000273 (0)
+#define ANOMALY_05000311 (0)
+#define ANOMALY_05000323 (0)
+
+#endif
diff --git a/include/asm-blackfin/mach-bf548/bf548.h b/include/asm-blackfin/mach-bf548/bf548.h
index 9498313a2cb7..7e6d349beb08 100644
--- a/include/asm-blackfin/mach-bf548/bf548.h
+++ b/include/asm-blackfin/mach-bf548/bf548.h
@@ -52,12 +52,12 @@
 /***************************/
 
 
-#define BLKFIN_DSUBBANKS	4
-#define BLKFIN_DWAYS		2
-#define BLKFIN_DLINES		64
-#define BLKFIN_ISUBBANKS	4
-#define BLKFIN_IWAYS		4
-#define BLKFIN_ILINES		32
+#define BFIN_DSUBBANKS	4
+#define BFIN_DWAYS		2
+#define BFIN_DLINES		64
+#define BFIN_ISUBBANKS	4
+#define BFIN_IWAYS		4
+#define BFIN_ILINES		32
 
 #define WAY0_L			0x1
 #define WAY1_L			0x2
@@ -106,93 +106,6 @@
 
 #define AMGCTLVAL	(V_AMBEN | V_AMCKEN)
 
-#define MAX_VC	650000000
-#define MIN_VC	50000000
-
-/********************************PLL Settings **************************************/
-#ifdef CONFIG_BFIN_KERNEL_CLOCK
-#if (CONFIG_VCO_MULT < 0)
-#error "VCO Multiplier is less than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT == 0)
-#error "VCO Multiplier should be greater than 0. Please select a different value"
-#endif
-
-#if (CONFIG_VCO_MULT > 64)
-#error "VCO Multiplier is more than 64. Please select a different value"
-#endif
-
-#ifndef CONFIG_CLKIN_HALF
-#define CONFIG_VCO_HZ	(CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)
-#else
-#define CONFIG_VCO_HZ	((CONFIG_CLKIN_HZ * CONFIG_VCO_MULT)/2)
-#endif
-
-#ifndef CONFIG_PLL_BYPASS
-#define CONFIG_CCLK_HZ	(CONFIG_VCO_HZ/CONFIG_CCLK_DIV)
-#define CONFIG_SCLK_HZ	(CONFIG_VCO_HZ/CONFIG_SCLK_DIV)
-#else
-#define CONFIG_CCLK_HZ	CONFIG_CLKIN_HZ
-#define CONFIG_SCLK_HZ	CONFIG_CLKIN_HZ
-#endif
-
-#if (CONFIG_SCLK_DIV < 1)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_SCLK_DIV > 15)
-#error "SCLK DIV cannot be less than 1 or more than 15. Please select a proper value"
-#endif
-
-#if (CONFIG_CCLK_DIV != 1)
-#if (CONFIG_CCLK_DIV != 2)
-#if (CONFIG_CCLK_DIV != 4)
-#if (CONFIG_CCLK_DIV != 8)
-#error "CCLK DIV can be 1,2,4 or 8 only. Please select a proper value"
-#endif
-#endif
-#endif
-#endif
-
-#if (CONFIG_VCO_HZ > MAX_VC)
-#error "VCO selected is more than maximum value. Please change the VCO multipler"
-#endif
-
-#if (CONFIG_SCLK_HZ > 133000000)
-#error "Sclk value selected is more than maximum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ < 27000000)
-#error "Sclk value selected is less than minimum. Please select a proper value for SCLK multiplier"
-#endif
-
-#if (CONFIG_SCLK_HZ >= CONFIG_CCLK_HZ)
-#if (CONFIG_SCLK_HZ != CONFIG_CLKIN_HZ)
-#if (CONFIG_CCLK_HZ != CONFIG_CLKIN_HZ)
-#error "Please select sclk less than cclk"
-#endif
-#endif
-#endif
-
-#if (CONFIG_CCLK_DIV == 1)
-#define CONFIG_CCLK_ACT_DIV   CCLK_DIV1
-#endif
-#if (CONFIG_CCLK_DIV == 2)
-#define CONFIG_CCLK_ACT_DIV   CCLK_DIV2
-#endif
-#if (CONFIG_CCLK_DIV == 4)
-#define CONFIG_CCLK_ACT_DIV   CCLK_DIV4
-#endif
-#if (CONFIG_CCLK_DIV == 8)
-#define CONFIG_CCLK_ACT_DIV   CCLK_DIV8
-#endif
-#ifndef CONFIG_CCLK_ACT_DIV
-#define CONFIG_CCLK_ACT_DIV   CONFIG_CCLK_DIV_not_defined_properly
-#endif
-
-#endif	/* CONFIG_BFIN_KERNEL_CLOCK */
-
 #ifdef CONFIG_BF542
 #define CPU "BF542"
 #define CPUID 0x027c8000
@@ -213,59 +126,4 @@
 #define CPUID 0x0
 #endif
 
-#if (CONFIG_MEM_SIZE % 4)
-#error "SDRAM mem size must be multible of 4MB"
-#endif
-
-#define SDRAM_IGENERIC    (CPLB_L1_CHBL | CPLB_USER_RD | CPLB_VALID | CPLB_PORTPRIO)
-#define SDRAM_IKERNEL     (SDRAM_IGENERIC | CPLB_LOCK)
-#define L1_IMEMORY        (               CPLB_USER_RD | CPLB_VALID | CPLB_LOCK)
-#define SDRAM_INON_CHBL   (               CPLB_USER_RD | CPLB_VALID)
-
-/*Use the menuconfig cache policy here - CONFIG_BLKFIN_WT/CONFIG_BLKFIN_WB*/
-
-#define ANOMALY_05000158_WORKAROUND		0x200
-#ifdef CONFIG_BLKFIN_WB		/*Write Back Policy */
-#define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_DIRTY \
-			| CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND)
-#else				/*Write Through */
-#define SDRAM_DGENERIC   (CPLB_L1_CHBL | CPLB_WT | CPLB_L1_AOW \
-			| CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#endif
-
-
-#define L1_DMEMORY       (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
-#define SDRAM_DNON_CHBL  (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#define SDRAM_EBIU       (CPLB_SUPV_WR | CPLB_USER_WR | CPLB_USER_RD | CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_DIRTY )
-#define SDRAM_OOPS  	 (CPLB_VALID | ANOMALY_05000158_WORKAROUND | CPLB_LOCK | CPLB_DIRTY )
-
-#define SIZE_1K 0x00000400	/* 1K */
-#define SIZE_4K 0x00001000	/* 4K */
-#define SIZE_1M 0x00100000	/* 1M */
-#define SIZE_4M 0x00400000	/* 4M */
-
-#define MAX_CPLBS (16 * 2)
-
-/*
-* Number of required data CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 16 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Data Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-* 1 for ASYNC Memory
-*/
-
-
-#define MAX_SWITCH_D_CPLBS (((CONFIG_MEM_SIZE / 4) + 16 + 1 + 1 + 1) * 2)
-
-/*
-* Number of required instruction CPLB switchtable entries
-* MEMSIZE / 4 (we mostly install 4M page size CPLBs
-* approx 12 for smaller 1MB page size CPLBs for allignment purposes
-* 1 for L1 Instruction Memory
-* 1 for CONFIG_DEBUG_HUNT_FOR_ZERO
-*/
-
-#define MAX_SWITCH_I_CPLBS (((CONFIG_MEM_SIZE / 4) + 12 + 1 + 1) * 2)
-
 #endif	/* __MACH_BF48_H__  */
diff --git a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
index 2f4afc90db11..f21a1620e6bd 100644
--- a/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
+++ b/include/asm-blackfin/mach-bf548/bfin_serial_5xx.h
@@ -1,5 +1,6 @@
 #include <linux/serial.h>
 #include <asm/dma.h>
+#include <asm/portmux.h>
 
 #define NR_PORTS		4
 
@@ -143,50 +144,48 @@ struct bfin_serial_res bfin_serial_resource[] = {
 
 int nr_ports = ARRAY_SIZE(bfin_serial_resource);
 
+#define DRIVER_NAME "bfin-uart"
+
 static void bfin_serial_hw_init(struct bfin_serial_port *uart)
 {
 #ifdef CONFIG_SERIAL_BFIN_UART0
-	/* Enable UART0 RX and TX on pin 7 & 8 of PORT E */
-	bfin_write_PORTE_FER(0x180 | bfin_read_PORTE_FER());
-	bfin_write_PORTE_MUX(0x3C000 | bfin_read_PORTE_MUX());
+	peripheral_request(P_UART0_TX, DRIVER_NAME);
+	peripheral_request(P_UART0_RX, DRIVER_NAME);
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_UART1
-	/* Enable UART1 RX and TX on pin 0 & 1 of PORT H */
-	bfin_write_PORTH_FER(0x3 | bfin_read_PORTH_FER());
-	bfin_write_PORTH_MUX(~0xF & bfin_read_PORTH_MUX());
+	peripheral_request(P_UART1_TX, DRIVER_NAME);
+	peripheral_request(P_UART1_RX, DRIVER_NAME);
+
 #ifdef CONFIG_BFIN_UART1_CTSRTS
-	/* Enable UART1 RTS and CTS on pin 9 & 10 of PORT E */
-	bfin_write_PORTE_FER(0x600 | bfin_read_PORTE_FER());
-	bfin_write_PORTE_MUX(~0x3C0000 & bfin_read_PORTE_MUX());
+	peripheral_request(P_UART1_RTS, DRIVER_NAME);
+	peripheral_request(P_UART1_CTS DRIVER_NAME);
 #endif
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_UART2
-	/* Enable UART2 RX and TX on pin 4 & 5 of PORT B */
-	bfin_write_PORTB_FER(0x30 | bfin_read_PORTB_FER());
-	bfin_write_PORTB_MUX(~0xF00 & bfin_read_PORTB_MUX());
+	peripheral_request(P_UART2_TX, DRIVER_NAME);
+	peripheral_request(P_UART2_RX, DRIVER_NAME);
 #endif
 
 #ifdef CONFIG_SERIAL_BFIN_UART3
-	/* Enable UART3 RX and TX on pin 6 & 7 of PORT B */
-	bfin_write_PORTB_FER(0xC0 | bfin_read_PORTB_FER());
-	bfin_write_PORTB_MUX(~0xF000 | bfin_read_PORTB_MUX());
+	peripheral_request(P_UART3_TX, DRIVER_NAME);
+	peripheral_request(P_UART3_RX, DRIVER_NAME);
+
 #ifdef CONFIG_BFIN_UART3_CTSRTS
-	/* Enable UART3 RTS and CTS on pin 2 & 3 of PORT B */
-	bfin_write_PORTB_FER(0xC | bfin_read_PORTB_FER());
-	bfin_write_PORTB_MUX(~0xF0 | bfin_read_PORTB_MUX());
+	peripheral_request(P_UART3_RTS, DRIVER_NAME);
+	peripheral_request(P_UART3_CTS DRIVER_NAME);
 #endif
 #endif
 	SSYNC();
 #ifdef CONFIG_SERIAL_BFIN_CTSRTS
 	if (uart->cts_pin >= 0) {
-		gpio_request(uart->cts_pin, NULL);
+		gpio_request(uart->cts_pin, DRIVER_NAME);
 		gpio_direction_input(uart->cts_pin);
 	}
 
 	if (uart->rts_pin >= 0) {
-		gpio_request(uart->rts_pin, NULL);
+		gpio_request(uart->rts_pin, DRIVER_NAME);
 		gpio_direction_output(uart->rts_pin);
 	}
 #endif
diff --git a/include/asm-blackfin/mach-bf548/blackfin.h b/include/asm-blackfin/mach-bf548/blackfin.h
index 791218fe7d94..19e84dd4c99c 100644
--- a/include/asm-blackfin/mach-bf548/blackfin.h
+++ b/include/asm-blackfin/mach-bf548/blackfin.h
@@ -54,7 +54,7 @@
 #include "defBF549.h"
 #endif
 
-#if !(defined(__ASSEMBLY__) || defined(ASSEMBLY))
+#if !defined(__ASSEMBLY__)
 #ifdef CONFIG_BF542
 #include "cdefBF542.h"
 #endif
diff --git a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
index cdf29e75ea59..aefab3f618c1 100644
--- a/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/cdefBF54x_base.h
@@ -31,6 +31,8 @@
 #ifndef _CDEF_BF54X_H
 #define _CDEF_BF54X_H
 
+#include <asm/blackfin.h>
+
 #include "defBF54x_base.h"
 #include <asm/system.h>
 
@@ -60,7 +62,7 @@ static __inline__ void bfin_write_VR_CTL(unsigned int val)
 	bfin_write32(SIC_IWR2, 0);
 
 	bfin_write16(VR_CTL, val);
-	__builtin_bfin_ssync();
+	SSYNC();
 
 	local_irq_save(flags);
 	asm("IDLE;");
diff --git a/include/asm-blackfin/mach-bf548/defBF544.h b/include/asm-blackfin/mach-bf548/defBF544.h
index dd955dcd39b8..760307e34b9e 100644
--- a/include/asm-blackfin/mach-bf548/defBF544.h
+++ b/include/asm-blackfin/mach-bf548/defBF544.h
@@ -81,6 +81,7 @@
 
 /* Two Wire Interface Registers (TWI1) */
 
+#define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
 #define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
diff --git a/include/asm-blackfin/mach-bf548/defBF548.h b/include/asm-blackfin/mach-bf548/defBF548.h
index 8d4214e0807c..70af33c963b0 100644
--- a/include/asm-blackfin/mach-bf548/defBF548.h
+++ b/include/asm-blackfin/mach-bf548/defBF548.h
@@ -120,6 +120,7 @@
 
 /* Two Wire Interface Registers (TWI1) */
 
+#define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
 #define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
@@ -139,6 +140,7 @@
 
 /* SPI2  Registers */
 
+#define                     SPI2_REGBASE  0xffc02400
 #define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
 #define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
 #define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
diff --git a/include/asm-blackfin/mach-bf548/defBF549.h b/include/asm-blackfin/mach-bf548/defBF549.h
index c2f4734da48d..50b3fe55ef0c 100644
--- a/include/asm-blackfin/mach-bf548/defBF549.h
+++ b/include/asm-blackfin/mach-bf548/defBF549.h
@@ -121,6 +121,7 @@
 
 /* Two Wire Interface Registers (TWI1) */
 
+#define                     TWI1_REGBASE  0xffc02200
 #define                      TWI1_CLKDIV  0xffc02200   /* Clock Divider Register */
 #define                     TWI1_CONTROL  0xffc02204   /* TWI Control Register */
 #define                  TWI1_SLAVE_CTRL  0xffc02208   /* TWI Slave Mode Control Register */
@@ -140,6 +141,7 @@
 
 /* SPI2  Registers */
 
+#define                     SPI2_REGBASE  0xffc02400
 #define                         SPI2_CTL  0xffc02400   /* SPI2 Control Register */
 #define                         SPI2_FLG  0xffc02404   /* SPI2 Flag Register */
 #define                        SPI2_STAT  0xffc02408   /* SPI2 Status Register */
diff --git a/include/asm-blackfin/mach-bf548/defBF54x_base.h b/include/asm-blackfin/mach-bf548/defBF54x_base.h
index 895ddd40a838..e2632db74baa 100644
--- a/include/asm-blackfin/mach-bf548/defBF54x_base.h
+++ b/include/asm-blackfin/mach-bf548/defBF54x_base.h
@@ -109,6 +109,7 @@
 
 /* SPI0 Registers */
 
+#define                     SPI0_REGBASE  0xffc00500
 #define                         SPI0_CTL  0xffc00500   /* SPI0 Control Register */
 #define                         SPI0_FLG  0xffc00504   /* SPI0 Flag Register */
 #define                        SPI0_STAT  0xffc00508   /* SPI0 Status Register */
@@ -121,6 +122,7 @@
 
 /* Two Wire Interface Registers (TWI0) */
 
+#define                     TWI0_REGBASE  0xffc00700
 #define                      TWI0_CLKDIV  0xffc00700   /* Clock Divider Register */
 #define                     TWI0_CONTROL  0xffc00704   /* TWI Control Register */
 #define                  TWI0_SLAVE_CTRL  0xffc00708   /* TWI Slave Mode Control Register */
@@ -978,6 +980,7 @@
 
 /* SPI1 Registers */
 
+#define                     SPI1_REGBASE  0xffc02300
 #define                         SPI1_CTL  0xffc02300   /* SPI1 Control Register */
 #define                         SPI1_FLG  0xffc02304   /* SPI1 Flag Register */
 #define                        SPI1_STAT  0xffc02308   /* SPI1 Status Register */
diff --git a/include/asm-blackfin/mach-bf548/gpio.h b/include/asm-blackfin/mach-bf548/gpio.h
index dbf66bcabe35..cb8b0f15c9a6 100644
--- a/include/asm-blackfin/mach-bf548/gpio.h
+++ b/include/asm-blackfin/mach-bf548/gpio.h
@@ -209,8 +209,3 @@ struct gpio_port_t {
 	unsigned short dummy7;
 	unsigned int port_mux;
 };
-
-int gpio_request(unsigned short gpio, const char *label);
-void peripheral_free(unsigned short per);
-int peripheral_request_list(unsigned short per[], const char *label);
-void peripheral_free_list(unsigned short per[]);
diff --git a/include/asm-blackfin/mach-bf548/irq.h b/include/asm-blackfin/mach-bf548/irq.h
index e548d3cd81e3..3b08cf9bd6f3 100644
--- a/include/asm-blackfin/mach-bf548/irq.h
+++ b/include/asm-blackfin/mach-bf548/irq.h
@@ -55,287 +55,288 @@ Events         (highest priority)  EMU         0
 
 /* The ABSTRACT IRQ definitions */
 /** the first seven of the following are fixed, the rest you change if you need to **/
-#define IRQ_EMU		0	/* Emulation */
-#define IRQ_RST		1	/* reset */
-#define IRQ_NMI		2	/* Non Maskable */
-#define IRQ_EVX		3	/* Exception */
-#define IRQ_UNUSED	4	/* - unused interrupt*/
-#define IRQ_HWERR	5	/* Hardware Error */
-#define IRQ_CORETMR	6	/* Core timer */
-
-#define BFIN_IRQ(x)	((x) + 7)
-
-#define IRQ_PLL_WAKEUP	BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
-#define IRQ_DMAC0_ERR	BFIN_IRQ(1)	/* DMAC0 Status Interrupt */
-#define IRQ_EPPI0_ERR	BFIN_IRQ(2)	/* EPPI0 Error Interrupt */
-#define IRQ_SPORT0_ERR	BFIN_IRQ(3)	/* SPORT0 Error Interrupt */
-#define IRQ_SPORT1_ERR	BFIN_IRQ(4)	/* SPORT1 Error Interrupt */
-#define IRQ_SPI0_ERR	BFIN_IRQ(5)	/* SPI0 Status(Error) Interrupt */
-#define IRQ_UART0_ERR	BFIN_IRQ(6)	/* UART0 Status(Error) Interrupt */
-#define IRQ_RTC		BFIN_IRQ(7)	/* RTC Interrupt */
-#define IRQ_EPPI0	BFIN_IRQ(8)	/* EPPI0 Interrupt (DMA12) */
-#define IRQ_SPORT0_RX	BFIN_IRQ(9)	/* SPORT0 RX Interrupt (DMA0) */
-#define IRQ_SPORT0_TX	BFIN_IRQ(10)	/* SPORT0 TX Interrupt (DMA1) */
-#define IRQ_SPORT1_RX	BFIN_IRQ(11)	/* SPORT1 RX Interrupt (DMA2) */
-#define IRQ_SPORT1_TX	BFIN_IRQ(12)	/* SPORT1 TX Interrupt (DMA3) */
-#define IRQ_SPI0	BFIN_IRQ(13)	/* SPI0 Interrupt (DMA4) */
-#define IRQ_UART0_RX	BFIN_IRQ(14)	/* UART0 RX Interrupt (DMA6) */
-#define IRQ_UART0_TX	BFIN_IRQ(15)	/* UART0 TX Interrupt (DMA7) */
-#define IRQ_TIMER8	BFIN_IRQ(16)	/* TIMER 8 Interrupt */
-#define IRQ_TIMER9	BFIN_IRQ(17)	/* TIMER 9 Interrupt */
-#define IRQ_TIMER10	BFIN_IRQ(18)	/* TIMER 10 Interrupt */
-#define IRQ_PINT0	BFIN_IRQ(19)	/* PINT0 Interrupt */
-#define IRQ_PINT1	BFIN_IRQ(20)	/* PINT1 Interrupt */
-#define IRQ_MDMAS0	BFIN_IRQ(21)	/* MDMA Stream 0 Interrupt */
-#define IRQ_MDMAS1	BFIN_IRQ(22)	/* MDMA Stream 1 Interrupt */
-#define IRQ_WATCHDOG	BFIN_IRQ(23)	/* Watchdog Interrupt */
-#define IRQ_DMAC1_ERR	BFIN_IRQ(24)	/* DMAC1 Status (Error) Interrupt */
-#define IRQ_SPORT2_ERR	BFIN_IRQ(25)	/* SPORT2 Error Interrupt */
-#define IRQ_SPORT3_ERR	BFIN_IRQ(26)	/* SPORT3 Error Interrupt */
-#define IRQ_MXVR_DATA	BFIN_IRQ(27)	/* MXVR Data Interrupt */
-#define IRQ_SPI1_ERR	BFIN_IRQ(28)	/* SPI1 Status (Error) Interrupt */
-#define IRQ_SPI2_ERR	BFIN_IRQ(29)	/* SPI2 Status (Error) Interrupt */
-#define IRQ_UART1_ERR	BFIN_IRQ(30)	/* UART1 Status (Error) Interrupt */
-#define IRQ_UART2_ERR	BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
-#define IRQ_CAN0_ERR	BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
-#define IRQ_SPORT2_RX	BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
-#define IRQ_SPORT2_TX	BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
-#define IRQ_SPORT3_RX	BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
-#define IRQ_SPORT3_TX	BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
-#define IRQ_EPPI1	BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
-#define IRQ_EPPI2	BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
-#define IRQ_SPI1	BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
-#define IRQ_SPI2	BFIN_IRQ(40)	/* SPI2 (DMA23) Interrupt */
-#define IRQ_UART1_RX	BFIN_IRQ(41)	/* UART1 RX (DMA8) Interrupt */
-#define IRQ_UART1_TX	BFIN_IRQ(42)	/* UART1 TX (DMA9) Interrupt */
-#define IRQ_ATAPI_RX	BFIN_IRQ(43)	/* ATAPI RX (DMA10) Interrupt */
-#define IRQ_ATAPI_TX	BFIN_IRQ(44)	/* ATAPI TX (DMA11) Interrupt */
-#define IRQ_TWI0	BFIN_IRQ(45)	/* TWI0 Interrupt */
-#define IRQ_TWI1	BFIN_IRQ(46)	/* TWI1 Interrupt */
-#define IRQ_TWI		IRQ_TWI0	/* TWI Interrupt */
-#define IRQ_CAN0_RX	BFIN_IRQ(47)	/* CAN0 Receive Interrupt */
-#define IRQ_CAN0_TX	BFIN_IRQ(48)	/* CAN0 Transmit Interrupt */
-#define IRQ_MDMAS2	BFIN_IRQ(49)	/* MDMA Stream 2 Interrupt */
-#define IRQ_MDMAS3	BFIN_IRQ(50)	/* MDMA Stream 3 Interrupt */
-#define IRQ_MXVR_ERR	BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
-#define IRQ_MXVR_MSG	BFIN_IRQ(52)	/* MXVR Message Interrupt */
-#define IRQ_MXVR_PKT	BFIN_IRQ(53)	/* MXVR Packet Interrupt */
-#define IRQ_EPP1_ERR	BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
-#define IRQ_EPP2_ERR	BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
-#define IRQ_UART3_ERR	BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
-#define IRQ_HOST_ERR	BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
-#define IRQ_PIXC_ERR	BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
-#define IRQ_NFC_ERR	BFIN_IRQ(60)	/* NFC Error Interrupt */
-#define IRQ_ATAPI_ERR	BFIN_IRQ(61)	/* ATAPI Error Interrupt */
-#define IRQ_CAN1_ERR	BFIN_IRQ(62)	/* CAN1 Status (Error) Interrupt */
-#define IRQ_HS_DMA_ERR	BFIN_IRQ(63)	/* Handshake DMA Status Interrupt */
-#define IRQ_PIXC_IN0	BFIN_IRQ(64)	/* PIXC IN0 (DMA15) Interrupt */
-#define IRQ_PIXC_IN1	BFIN_IRQ(65)	/* PIXC IN1 (DMA16) Interrupt */
-#define IRQ_PIXC_OUT	BFIN_IRQ(66)	/* PIXC OUT (DMA17) Interrupt */
-#define IRQ_SDH		BFIN_IRQ(67)	/* SDH/NFC (DMA22) Interrupt */
-#define IRQ_CNT		BFIN_IRQ(68)	/* CNT Interrupt */
-#define IRQ_KEY		BFIN_IRQ(69)	/* KEY Interrupt */
-#define IRQ_CAN1_RX	BFIN_IRQ(70)	/* CAN1 RX Interrupt */
-#define IRQ_CAN1_TX	BFIN_IRQ(71)	/* CAN1 TX Interrupt */
-#define IRQ_SDH_MASK0	BFIN_IRQ(72)	/* SDH Mask 0 Interrupt */
-#define IRQ_SDH_MASK1	BFIN_IRQ(73)	/* SDH Mask 1 Interrupt */
-#define IRQ_USB_INT0	BFIN_IRQ(75)	/* USB INT0 Interrupt */
-#define IRQ_USB_INT1	BFIN_IRQ(76)	/* USB INT1 Interrupt */
-#define IRQ_USB_INT2	BFIN_IRQ(77)	/* USB INT2 Interrupt */
-#define IRQ_USB_DMA	BFIN_IRQ(78)	/* USB DMA Interrupt */
-#define IRQ_OPTSEC	BFIN_IRQ(79)	/* OTPSEC Interrupt */
-#define IRQ_TIMER0	BFIN_IRQ(86)	/* Timer 0 Interrupt */
-#define IRQ_TIMER1	BFIN_IRQ(87)	/* Timer 1 Interrupt */
-#define IRQ_TIMER2	BFIN_IRQ(88)	/* Timer 2 Interrupt */
-#define IRQ_TIMER3	BFIN_IRQ(89)	/* Timer 3 Interrupt */
-#define IRQ_TIMER4	BFIN_IRQ(90)	/* Timer 4 Interrupt */
-#define IRQ_TIMER5	BFIN_IRQ(91)	/* Timer 5 Interrupt */
-#define IRQ_TIMER6	BFIN_IRQ(92)	/* Timer 6 Interrupt */
-#define IRQ_TIMER7	BFIN_IRQ(93)	/* Timer 7 Interrupt */
-#define IRQ_PINT2	BFIN_IRQ(94)	/* PINT2 Interrupt */
-#define IRQ_PINT3	BFIN_IRQ(95)	/* PINT3 Interrupt */
-
-#define SYS_IRQS        IRQ_PINT3
-
-#define BFIN_PA_IRQ(x)	((x) + SYS_IRQS + 1)
-#define IRQ_PA0		BFIN_PA_IRQ(0)
-#define IRQ_PA1		BFIN_PA_IRQ(1)
-#define IRQ_PA2		BFIN_PA_IRQ(2)
-#define IRQ_PA3		BFIN_PA_IRQ(3)
-#define IRQ_PA4		BFIN_PA_IRQ(4)
-#define IRQ_PA5		BFIN_PA_IRQ(5)
-#define IRQ_PA6		BFIN_PA_IRQ(6)
-#define IRQ_PA7		BFIN_PA_IRQ(7)
-#define IRQ_PA8		BFIN_PA_IRQ(8)
-#define IRQ_PA9		BFIN_PA_IRQ(9)
-#define IRQ_PA10	BFIN_PA_IRQ(10)
-#define IRQ_PA11	BFIN_PA_IRQ(11)
-#define IRQ_PA12	BFIN_PA_IRQ(12)
-#define IRQ_PA13	BFIN_PA_IRQ(13)
-#define IRQ_PA14	BFIN_PA_IRQ(14)
-#define IRQ_PA15	BFIN_PA_IRQ(15)
-
-#define BFIN_PB_IRQ(x)	((x) + IRQ_PA15 + 1)
-#define IRQ_PB0		BFIN_PB_IRQ(0)
-#define IRQ_PB1		BFIN_PB_IRQ(1)
-#define IRQ_PB2		BFIN_PB_IRQ(2)
-#define IRQ_PB3		BFIN_PB_IRQ(3)
-#define IRQ_PB4		BFIN_PB_IRQ(4)
-#define IRQ_PB5		BFIN_PB_IRQ(5)
-#define IRQ_PB6		BFIN_PB_IRQ(6)
-#define IRQ_PB7		BFIN_PB_IRQ(7)
-#define IRQ_PB8		BFIN_PB_IRQ(8)
-#define IRQ_PB9		BFIN_PB_IRQ(9)
-#define IRQ_PB10	BFIN_PB_IRQ(10)
-#define IRQ_PB11	BFIN_PB_IRQ(11)
-#define IRQ_PB12	BFIN_PB_IRQ(12)
-#define IRQ_PB13	BFIN_PB_IRQ(13)
-#define IRQ_PB14	BFIN_PB_IRQ(14)
-#define IRQ_PB15	BFIN_PB_IRQ(15)		/* N/A */
-
-#define BFIN_PC_IRQ(x)	((x) + IRQ_PB15 + 1)
-#define IRQ_PC0		BFIN_PC_IRQ(0)
-#define IRQ_PC1		BFIN_PC_IRQ(1)
-#define IRQ_PC2		BFIN_PC_IRQ(2)
-#define IRQ_PC3		BFIN_PC_IRQ(3)
-#define IRQ_PC4		BFIN_PC_IRQ(4)
-#define IRQ_PC5		BFIN_PC_IRQ(5)
-#define IRQ_PC6		BFIN_PC_IRQ(6)
-#define IRQ_PC7		BFIN_PC_IRQ(7)
-#define IRQ_PC8		BFIN_PC_IRQ(8)
-#define IRQ_PC9		BFIN_PC_IRQ(9)
-#define IRQ_PC10	BFIN_PC_IRQ(10)
-#define IRQ_PC11	BFIN_PC_IRQ(11)
-#define IRQ_PC12	BFIN_PC_IRQ(12)
-#define IRQ_PC13	BFIN_PC_IRQ(13)
-#define IRQ_PC14	BFIN_PC_IRQ(14)		/* N/A */
-#define IRQ_PC15	BFIN_PC_IRQ(15)		/* N/A */
-
-#define BFIN_PD_IRQ(x)	((x) + IRQ_PC15 + 1)
-#define IRQ_PD0		BFIN_PD_IRQ(0)
-#define IRQ_PD1		BFIN_PD_IRQ(1)
-#define IRQ_PD2		BFIN_PD_IRQ(2)
-#define IRQ_PD3		BFIN_PD_IRQ(3)
-#define IRQ_PD4		BFIN_PD_IRQ(4)
-#define IRQ_PD5		BFIN_PD_IRQ(5)
-#define IRQ_PD6		BFIN_PD_IRQ(6)
-#define IRQ_PD7		BFIN_PD_IRQ(7)
-#define IRQ_PD8		BFIN_PD_IRQ(8)
-#define IRQ_PD9		BFIN_PD_IRQ(9)
-#define IRQ_PD10	BFIN_PD_IRQ(10)
-#define IRQ_PD11	BFIN_PD_IRQ(11)
-#define IRQ_PD12	BFIN_PD_IRQ(12)
-#define IRQ_PD13	BFIN_PD_IRQ(13)
-#define IRQ_PD14	BFIN_PD_IRQ(14)
-#define IRQ_PD15	BFIN_PD_IRQ(15)
-
-#define BFIN_PE_IRQ(x)	((x) + IRQ_PD15 + 1)
-#define IRQ_PE0		BFIN_PE_IRQ(0)
-#define IRQ_PE1		BFIN_PE_IRQ(1)
-#define IRQ_PE2		BFIN_PE_IRQ(2)
-#define IRQ_PE3		BFIN_PE_IRQ(3)
-#define IRQ_PE4		BFIN_PE_IRQ(4)
-#define IRQ_PE5		BFIN_PE_IRQ(5)
-#define IRQ_PE6		BFIN_PE_IRQ(6)
-#define IRQ_PE7		BFIN_PE_IRQ(7)
-#define IRQ_PE8		BFIN_PE_IRQ(8)
-#define IRQ_PE9		BFIN_PE_IRQ(9)
-#define IRQ_PE10	BFIN_PE_IRQ(10)
-#define IRQ_PE11	BFIN_PE_IRQ(11)
-#define IRQ_PE12	BFIN_PE_IRQ(12)
-#define IRQ_PE13	BFIN_PE_IRQ(13)
-#define IRQ_PE14	BFIN_PE_IRQ(14)
-#define IRQ_PE15	BFIN_PE_IRQ(15)
-
-#define BFIN_PF_IRQ(x)	((x) + IRQ_PE15 + 1)
-#define IRQ_PF0		BFIN_PF_IRQ(0)
-#define IRQ_PF1		BFIN_PF_IRQ(1)
-#define IRQ_PF2		BFIN_PF_IRQ(2)
-#define IRQ_PF3		BFIN_PF_IRQ(3)
-#define IRQ_PF4		BFIN_PF_IRQ(4)
-#define IRQ_PF5		BFIN_PF_IRQ(5)
-#define IRQ_PF6		BFIN_PF_IRQ(6)
-#define IRQ_PF7		BFIN_PF_IRQ(7)
-#define IRQ_PF8		BFIN_PF_IRQ(8)
-#define IRQ_PF9		BFIN_PF_IRQ(9)
-#define IRQ_PF10	BFIN_PF_IRQ(10)
-#define IRQ_PF11	BFIN_PF_IRQ(11)
-#define IRQ_PF12	BFIN_PF_IRQ(12)
-#define IRQ_PF13	BFIN_PF_IRQ(13)
-#define IRQ_PF14	BFIN_PF_IRQ(14)
-#define IRQ_PF15	BFIN_PF_IRQ(15)
-
-#define BFIN_PG_IRQ(x)	((x) + IRQ_PF15 + 1)
-#define IRQ_PG0		BFIN_PG_IRQ(0)
-#define IRQ_PG1		BFIN_PG_IRQ(1)
-#define IRQ_PG2		BFIN_PG_IRQ(2)
-#define IRQ_PG3		BFIN_PG_IRQ(3)
-#define IRQ_PG4		BFIN_PG_IRQ(4)
-#define IRQ_PG5		BFIN_PG_IRQ(5)
-#define IRQ_PG6		BFIN_PG_IRQ(6)
-#define IRQ_PG7		BFIN_PG_IRQ(7)
-#define IRQ_PG8		BFIN_PG_IRQ(8)
-#define IRQ_PG9		BFIN_PG_IRQ(9)
-#define IRQ_PG10	BFIN_PG_IRQ(10)
-#define IRQ_PG11	BFIN_PG_IRQ(11)
-#define IRQ_PG12	BFIN_PG_IRQ(12)
-#define IRQ_PG13	BFIN_PG_IRQ(13)
-#define IRQ_PG14	BFIN_PG_IRQ(14)
-#define IRQ_PG15	BFIN_PG_IRQ(15)
-
-#define BFIN_PH_IRQ(x)	((x) + IRQ_PG15 + 1)
-#define IRQ_PH0		BFIN_PH_IRQ(0)
-#define IRQ_PH1		BFIN_PH_IRQ(1)
-#define IRQ_PH2		BFIN_PH_IRQ(2)
-#define IRQ_PH3		BFIN_PH_IRQ(3)
-#define IRQ_PH4		BFIN_PH_IRQ(4)
-#define IRQ_PH5		BFIN_PH_IRQ(5)
-#define IRQ_PH6		BFIN_PH_IRQ(6)
-#define IRQ_PH7		BFIN_PH_IRQ(7)
-#define IRQ_PH8		BFIN_PH_IRQ(8)
-#define IRQ_PH9		BFIN_PH_IRQ(9)
-#define IRQ_PH10	BFIN_PH_IRQ(10)
-#define IRQ_PH11	BFIN_PH_IRQ(11)
-#define IRQ_PH12	BFIN_PH_IRQ(12)
-#define IRQ_PH13	BFIN_PH_IRQ(13)
-#define IRQ_PH14	BFIN_PH_IRQ(14)		/* N/A */
-#define IRQ_PH15	BFIN_PH_IRQ(15)		/* N/A */
-
-#define BFIN_PI_IRQ(x)	((x) + IRQ_PH15 + 1)
-#define IRQ_PI0		BFIN_PI_IRQ(0)
-#define IRQ_PI1		BFIN_PI_IRQ(1)
-#define IRQ_PI2		BFIN_PI_IRQ(2)
-#define IRQ_PI3		BFIN_PI_IRQ(3)
-#define IRQ_PI4		BFIN_PI_IRQ(4)
-#define IRQ_PI5		BFIN_PI_IRQ(5)
-#define IRQ_PI6		BFIN_PI_IRQ(6)
-#define IRQ_PI7		BFIN_PI_IRQ(7)
-#define IRQ_PI8		BFIN_PI_IRQ(8)
-#define IRQ_PI9		BFIN_PI_IRQ(9)
-#define IRQ_PI10	BFIN_PI_IRQ(10)
-#define IRQ_PI11	BFIN_PI_IRQ(11)
-#define IRQ_PI12	BFIN_PI_IRQ(12)
-#define IRQ_PI13	BFIN_PI_IRQ(13)
-#define IRQ_PI14	BFIN_PI_IRQ(14)
-#define IRQ_PI15	BFIN_PI_IRQ(15)
-
-#define BFIN_PJ_IRQ(x)	((x) + IRQ_PI15 + 1)
-#define IRQ_PJ0		BFIN_PJ_IRQ(0)
-#define IRQ_PJ1		BFIN_PJ_IRQ(1)
-#define IRQ_PJ2		BFIN_PJ_IRQ(2)
-#define IRQ_PJ3		BFIN_PJ_IRQ(3)
-#define IRQ_PJ4		BFIN_PJ_IRQ(4)
-#define IRQ_PJ5		BFIN_PJ_IRQ(5)
-#define IRQ_PJ6		BFIN_PJ_IRQ(6)
-#define IRQ_PJ7		BFIN_PJ_IRQ(7)
-#define IRQ_PJ8		BFIN_PJ_IRQ(8)
-#define IRQ_PJ9		BFIN_PJ_IRQ(9)
-#define IRQ_PJ10	BFIN_PJ_IRQ(10)
-#define IRQ_PJ11	BFIN_PJ_IRQ(11)
-#define IRQ_PJ12	BFIN_PJ_IRQ(12)
-#define IRQ_PJ13	BFIN_PJ_IRQ(13)
-#define IRQ_PJ14	BFIN_PJ_IRQ(14)		/* N/A */
-#define IRQ_PJ15	BFIN_PJ_IRQ(15)		/* N/A */
+#define IRQ_EMU			0	/* Emulation */
+#define IRQ_RST			1	/* reset */
+#define IRQ_NMI			2	/* Non Maskable */
+#define IRQ_EVX			3	/* Exception */
+#define IRQ_UNUSED		4	/* - unused interrupt*/
+#define IRQ_HWERR		5	/* Hardware Error */
+#define IRQ_CORETMR		6	/* Core timer */
+
+#define BFIN_IRQ(x)		((x) + 7)
+
+#define IRQ_PLL_WAKEUP		BFIN_IRQ(0)	/* PLL Wakeup Interrupt */
+#define IRQ_DMAC0_ERROR		BFIN_IRQ(1)	/* DMAC0 Status Interrupt */
+#define IRQ_EPPI0_ERROR		BFIN_IRQ(2)	/* EPPI0 Error Interrupt */
+#define IRQ_SPORT0_ERROR	BFIN_IRQ(3)	/* SPORT0 Error Interrupt */
+#define IRQ_SPORT1_ERROR	BFIN_IRQ(4)	/* SPORT1 Error Interrupt */
+#define IRQ_SPI0_ERROR		BFIN_IRQ(5)	/* SPI0 Status(Error) Interrupt */
+#define IRQ_UART0_ERROR		BFIN_IRQ(6)	/* UART0 Status(Error) Interrupt */
+#define IRQ_RTC			BFIN_IRQ(7)	/* RTC Interrupt */
+#define IRQ_EPPI0		BFIN_IRQ(8)	/* EPPI0 Interrupt (DMA12) */
+#define IRQ_SPORT0_RX		BFIN_IRQ(9)	/* SPORT0 RX Interrupt (DMA0) */
+#define IRQ_SPORT0_TX		BFIN_IRQ(10)	/* SPORT0 TX Interrupt (DMA1) */
+#define IRQ_SPORT1_RX		BFIN_IRQ(11)	/* SPORT1 RX Interrupt (DMA2) */
+#define IRQ_SPORT1_TX		BFIN_IRQ(12)	/* SPORT1 TX Interrupt (DMA3) */
+#define IRQ_SPI0		BFIN_IRQ(13)	/* SPI0 Interrupt (DMA4) */
+#define IRQ_UART0_RX		BFIN_IRQ(14)	/* UART0 RX Interrupt (DMA6) */
+#define IRQ_UART0_TX		BFIN_IRQ(15)	/* UART0 TX Interrupt (DMA7) */
+#define IRQ_TIMER8		BFIN_IRQ(16)	/* TIMER 8 Interrupt */
+#define IRQ_TIMER9		BFIN_IRQ(17)	/* TIMER 9 Interrupt */
+#define IRQ_TIMER10		BFIN_IRQ(18)	/* TIMER 10 Interrupt */
+#define IRQ_PINT0		BFIN_IRQ(19)	/* PINT0 Interrupt */
+#define IRQ_PINT1		BFIN_IRQ(20)	/* PINT1 Interrupt */
+#define IRQ_MDMAS0		BFIN_IRQ(21)	/* MDMA Stream 0 Interrupt */
+#define IRQ_MDMAS1		BFIN_IRQ(22)	/* MDMA Stream 1 Interrupt */
+#define IRQ_WATCHDOG		BFIN_IRQ(23)	/* Watchdog Interrupt */
+#define IRQ_DMAC1_ERROR		BFIN_IRQ(24)	/* DMAC1 Status (Error) Interrupt */
+#define IRQ_SPORT2_ERROR	BFIN_IRQ(25)	/* SPORT2 Error Interrupt */
+#define IRQ_SPORT3_ERROR	BFIN_IRQ(26)	/* SPORT3 Error Interrupt */
+#define IRQ_MXVR_DATA		BFIN_IRQ(27)	/* MXVR Data Interrupt */
+#define IRQ_SPI1_ERROR		BFIN_IRQ(28)	/* SPI1 Status (Error) Interrupt */
+#define IRQ_SPI2_ERROR		BFIN_IRQ(29)	/* SPI2 Status (Error) Interrupt */
+#define IRQ_UART1_ERROR		BFIN_IRQ(30)	/* UART1 Status (Error) Interrupt */
+#define IRQ_UART2_ERROR		BFIN_IRQ(31)	/* UART2 Status (Error) Interrupt */
+#define IRQ_CAN0_ERROR		BFIN_IRQ(32)	/* CAN0 Status (Error) Interrupt */
+#define IRQ_SPORT2_RX		BFIN_IRQ(33)	/* SPORT2 RX (DMA18) Interrupt */
+#define IRQ_SPORT2_TX		BFIN_IRQ(34)	/* SPORT2 TX (DMA19) Interrupt */
+#define IRQ_SPORT3_RX		BFIN_IRQ(35)	/* SPORT3 RX (DMA20) Interrupt */
+#define IRQ_SPORT3_TX		BFIN_IRQ(36)	/* SPORT3 TX (DMA21) Interrupt */
+#define IRQ_EPPI1		BFIN_IRQ(37)	/* EPP1 (DMA13) Interrupt */
+#define IRQ_EPPI2		BFIN_IRQ(38)	/* EPP2 (DMA14) Interrupt */
+#define IRQ_SPI1		BFIN_IRQ(39)	/* SPI1 (DMA5) Interrupt */
+#define IRQ_SPI2		BFIN_IRQ(40)	/* SPI2 (DMA23) Interrupt */
+#define IRQ_UART1_RX		BFIN_IRQ(41)	/* UART1 RX (DMA8) Interrupt */
+#define IRQ_UART1_TX		BFIN_IRQ(42)	/* UART1 TX (DMA9) Interrupt */
+#define IRQ_ATAPI_RX		BFIN_IRQ(43)	/* ATAPI RX (DMA10) Interrupt */
+#define IRQ_ATAPI_TX		BFIN_IRQ(44)	/* ATAPI TX (DMA11) Interrupt */
+#define IRQ_TWI0		BFIN_IRQ(45)	/* TWI0 Interrupt */
+#define IRQ_TWI1		BFIN_IRQ(46)	/* TWI1 Interrupt */
+#define IRQ_CAN0_RX		BFIN_IRQ(47)	/* CAN0 Receive Interrupt */
+#define IRQ_CAN0_TX		BFIN_IRQ(48)	/* CAN0 Transmit Interrupt */
+#define IRQ_MDMAS2		BFIN_IRQ(49)	/* MDMA Stream 2 Interrupt */
+#define IRQ_MDMAS3		BFIN_IRQ(50)	/* MDMA Stream 3 Interrupt */
+#define IRQ_MXVR_ERROR		BFIN_IRQ(51)	/* MXVR Status (Error) Interrupt */
+#define IRQ_MXVR_MSG		BFIN_IRQ(52)	/* MXVR Message Interrupt */
+#define IRQ_MXVR_PKT		BFIN_IRQ(53)	/* MXVR Packet Interrupt */
+#define IRQ_EPP1_ERROR		BFIN_IRQ(54)	/* EPPI1 Error Interrupt */
+#define IRQ_EPP2_ERROR		BFIN_IRQ(55)	/* EPPI2 Error Interrupt */
+#define IRQ_UART3_ERROR		BFIN_IRQ(56)	/* UART3 Status (Error) Interrupt */
+#define IRQ_HOST_ERROR		BFIN_IRQ(57)	/* HOST Status (Error) Interrupt */
+#define IRQ_PIXC_ERROR		BFIN_IRQ(59)	/* PIXC Status (Error) Interrupt */
+#define IRQ_NFC_ERROR		BFIN_IRQ(60)	/* NFC Error Interrupt */
+#define IRQ_ATAPI_ERROR		BFIN_IRQ(61)	/* ATAPI Error Interrupt */
+#define IRQ_CAN1_ERROR		BFIN_IRQ(62)	/* CAN1 Status (Error) Interrupt */
+#define IRQ_HS_DMA_ERROR	BFIN_IRQ(63)	/* Handshake DMA Status Interrupt */
+#define IRQ_PIXC_IN0		BFIN_IRQ(64)	/* PIXC IN0 (DMA15) Interrupt */
+#define IRQ_PIXC_IN1		BFIN_IRQ(65)	/* PIXC IN1 (DMA16) Interrupt */
+#define IRQ_PIXC_OUT		BFIN_IRQ(66)	/* PIXC OUT (DMA17) Interrupt */
+#define IRQ_SDH			BFIN_IRQ(67)	/* SDH/NFC (DMA22) Interrupt */
+#define IRQ_CNT			BFIN_IRQ(68)	/* CNT Interrupt */
+#define IRQ_KEY			BFIN_IRQ(69)	/* KEY Interrupt */
+#define IRQ_CAN1_RX		BFIN_IRQ(70)	/* CAN1 RX Interrupt */
+#define IRQ_CAN1_TX		BFIN_IRQ(71)	/* CAN1 TX Interrupt */
+#define IRQ_SDH_MASK0		BFIN_IRQ(72)	/* SDH Mask 0 Interrupt */
+#define IRQ_SDH_MASK1		BFIN_IRQ(73)	/* SDH Mask 1 Interrupt */
+#define IRQ_USB_INT0		BFIN_IRQ(75)	/* USB INT0 Interrupt */
+#define IRQ_USB_INT1		BFIN_IRQ(76)	/* USB INT1 Interrupt */
+#define IRQ_USB_INT2		BFIN_IRQ(77)	/* USB INT2 Interrupt */
+#define IRQ_USB_DMA		BFIN_IRQ(78)	/* USB DMA Interrupt */
+#define IRQ_OPTSEC		BFIN_IRQ(79)	/* OTPSEC Interrupt */
+#define IRQ_TIMER0		BFIN_IRQ(86)	/* Timer 0 Interrupt */
+#define IRQ_TIMER1		BFIN_IRQ(87)	/* Timer 1 Interrupt */
+#define IRQ_TIMER2		BFIN_IRQ(88)	/* Timer 2 Interrupt */
+#define IRQ_TIMER3		BFIN_IRQ(89)	/* Timer 3 Interrupt */
+#define IRQ_TIMER4		BFIN_IRQ(90)	/* Timer 4 Interrupt */
+#define IRQ_TIMER5		BFIN_IRQ(91)	/* Timer 5 Interrupt */
+#define IRQ_TIMER6		BFIN_IRQ(92)	/* Timer 6 Interrupt */
+#define IRQ_TIMER7		BFIN_IRQ(93)	/* Timer 7 Interrupt */
+#define IRQ_PINT2		BFIN_IRQ(94)	/* PINT2 Interrupt */
+#define IRQ_PINT3		BFIN_IRQ(95)	/* PINT3 Interrupt */
+
+#define SYS_IRQS        	IRQ_PINT3
+
+#define BFIN_PA_IRQ(x)		((x) + SYS_IRQS + 1)
+#define IRQ_PA0			BFIN_PA_IRQ(0)
+#define IRQ_PA1			BFIN_PA_IRQ(1)
+#define IRQ_PA2			BFIN_PA_IRQ(2)
+#define IRQ_PA3			BFIN_PA_IRQ(3)
+#define IRQ_PA4			BFIN_PA_IRQ(4)
+#define IRQ_PA5			BFIN_PA_IRQ(5)
+#define IRQ_PA6			BFIN_PA_IRQ(6)
+#define IRQ_PA7			BFIN_PA_IRQ(7)
+#define IRQ_PA8			BFIN_PA_IRQ(8)
+#define IRQ_PA9			BFIN_PA_IRQ(9)
+#define IRQ_PA10		BFIN_PA_IRQ(10)
+#define IRQ_PA11		BFIN_PA_IRQ(11)
+#define IRQ_PA12		BFIN_PA_IRQ(12)
+#define IRQ_PA13		BFIN_PA_IRQ(13)
+#define IRQ_PA14		BFIN_PA_IRQ(14)
+#define IRQ_PA15		BFIN_PA_IRQ(15)
+
+#define BFIN_PB_IRQ(x)		((x) + IRQ_PA15 + 1)
+#define IRQ_PB0			BFIN_PB_IRQ(0)
+#define IRQ_PB1			BFIN_PB_IRQ(1)
+#define IRQ_PB2			BFIN_PB_IRQ(2)
+#define IRQ_PB3			BFIN_PB_IRQ(3)
+#define IRQ_PB4			BFIN_PB_IRQ(4)
+#define IRQ_PB5			BFIN_PB_IRQ(5)
+#define IRQ_PB6			BFIN_PB_IRQ(6)
+#define IRQ_PB7			BFIN_PB_IRQ(7)
+#define IRQ_PB8			BFIN_PB_IRQ(8)
+#define IRQ_PB9			BFIN_PB_IRQ(9)
+#define IRQ_PB10		BFIN_PB_IRQ(10)
+#define IRQ_PB11		BFIN_PB_IRQ(11)
+#define IRQ_PB12		BFIN_PB_IRQ(12)
+#define IRQ_PB13		BFIN_PB_IRQ(13)
+#define IRQ_PB14		BFIN_PB_IRQ(14)
+#define IRQ_PB15		BFIN_PB_IRQ(15)		/* N/A */
+
+#define BFIN_PC_IRQ(x)		((x) + IRQ_PB15 + 1)
+#define IRQ_PC0			BFIN_PC_IRQ(0)
+#define IRQ_PC1			BFIN_PC_IRQ(1)
+#define IRQ_PC2			BFIN_PC_IRQ(2)
+#define IRQ_PC3			BFIN_PC_IRQ(3)
+#define IRQ_PC4			BFIN_PC_IRQ(4)
+#define IRQ_PC5			BFIN_PC_IRQ(5)
+#define IRQ_PC6			BFIN_PC_IRQ(6)
+#define IRQ_PC7			BFIN_PC_IRQ(7)
+#define IRQ_PC8			BFIN_PC_IRQ(8)
+#define IRQ_PC9			BFIN_PC_IRQ(9)
+#define IRQ_PC10		BFIN_PC_IRQ(10)
+#define IRQ_PC11		BFIN_PC_IRQ(11)
+#define IRQ_PC12		BFIN_PC_IRQ(12)
+#define IRQ_PC13		BFIN_PC_IRQ(13)
+#define IRQ_PC14		BFIN_PC_IRQ(14)		/* N/A */
+#define IRQ_PC15		BFIN_PC_IRQ(15)		/* N/A */
+
+#define BFIN_PD_IRQ(x)		((x) + IRQ_PC15 + 1)
+#define IRQ_PD0			BFIN_PD_IRQ(0)
+#define IRQ_PD1			BFIN_PD_IRQ(1)
+#define IRQ_PD2			BFIN_PD_IRQ(2)
+#define IRQ_PD3			BFIN_PD_IRQ(3)
+#define IRQ_PD4			BFIN_PD_IRQ(4)
+#define IRQ_PD5			BFIN_PD_IRQ(5)
+#define IRQ_PD6			BFIN_PD_IRQ(6)
+#define IRQ_PD7			BFIN_PD_IRQ(7)
+#define IRQ_PD8			BFIN_PD_IRQ(8)
+#define IRQ_PD9			BFIN_PD_IRQ(9)
+#define IRQ_PD10		BFIN_PD_IRQ(10)
+#define IRQ_PD11		BFIN_PD_IRQ(11)
+#define IRQ_PD12		BFIN_PD_IRQ(12)
+#define IRQ_PD13		BFIN_PD_IRQ(13)
+#define IRQ_PD14		BFIN_PD_IRQ(14)
+#define IRQ_PD15		BFIN_PD_IRQ(15)
+
+#define BFIN_PE_IRQ(x)		((x) + IRQ_PD15 + 1)
+#define IRQ_PE0			BFIN_PE_IRQ(0)
+#define IRQ_PE1			BFIN_PE_IRQ(1)
+#define IRQ_PE2			BFIN_PE_IRQ(2)
+#define IRQ_PE3			BFIN_PE_IRQ(3)
+#define IRQ_PE4			BFIN_PE_IRQ(4)
+#define IRQ_PE5			BFIN_PE_IRQ(5)
+#define IRQ_PE6			BFIN_PE_IRQ(6)
+#define IRQ_PE7			BFIN_PE_IRQ(7)
+#define IRQ_PE8			BFIN_PE_IRQ(8)
+#define IRQ_PE9			BFIN_PE_IRQ(9)
+#define IRQ_PE10		BFIN_PE_IRQ(10)
+#define IRQ_PE11		BFIN_PE_IRQ(11)
+#define IRQ_PE12		BFIN_PE_IRQ(12)
+#define IRQ_PE13		BFIN_PE_IRQ(13)
+#define IRQ_PE14		BFIN_PE_IRQ(14)
+#define IRQ_PE15		BFIN_PE_IRQ(15)
+
+#define BFIN_PF_IRQ(x)		((x) + IRQ_PE15 + 1)
+#define IRQ_PF0			BFIN_PF_IRQ(0)
+#define IRQ_PF1			BFIN_PF_IRQ(1)
+#define IRQ_PF2			BFIN_PF_IRQ(2)
+#define IRQ_PF3			BFIN_PF_IRQ(3)
+#define IRQ_PF4			BFIN_PF_IRQ(4)
+#define IRQ_PF5			BFIN_PF_IRQ(5)
+#define IRQ_PF6			BFIN_PF_IRQ(6)
+#define IRQ_PF7			BFIN_PF_IRQ(7)
+#define IRQ_PF8			BFIN_PF_IRQ(8)
+#define IRQ_PF9			BFIN_PF_IRQ(9)
+#define IRQ_PF10		BFIN_PF_IRQ(10)
+#define IRQ_PF11		BFIN_PF_IRQ(11)
+#define IRQ_PF12		BFIN_PF_IRQ(12)
+#define IRQ_PF13		BFIN_PF_IRQ(13)
+#define IRQ_PF14		BFIN_PF_IRQ(14)
+#define IRQ_PF15		BFIN_PF_IRQ(15)
+
+#define BFIN_PG_IRQ(x)		((x) + IRQ_PF15 + 1)
+#define IRQ_PG0			BFIN_PG_IRQ(0)
+#define IRQ_PG1			BFIN_PG_IRQ(1)
+#define IRQ_PG2			BFIN_PG_IRQ(2)
+#define IRQ_PG3			BFIN_PG_IRQ(3)
+#define IRQ_PG4			BFIN_PG_IRQ(4)
+#define IRQ_PG5			BFIN_PG_IRQ(5)
+#define IRQ_PG6			BFIN_PG_IRQ(6)
+#define IRQ_PG7			BFIN_PG_IRQ(7)
+#define IRQ_PG8			BFIN_PG_IRQ(8)
+#define IRQ_PG9			BFIN_PG_IRQ(9)
+#define IRQ_PG10		BFIN_PG_IRQ(10)
+#define IRQ_PG11		BFIN_PG_IRQ(11)
+#define IRQ_PG12		BFIN_PG_IRQ(12)
+#define IRQ_PG13		BFIN_PG_IRQ(13)
+#define IRQ_PG14		BFIN_PG_IRQ(14)
+#define IRQ_PG15		BFIN_PG_IRQ(15)
+
+#define BFIN_PH_IRQ(x)		((x) + IRQ_PG15 + 1)
+#define IRQ_PH0			BFIN_PH_IRQ(0)
+#define IRQ_PH1			BFIN_PH_IRQ(1)
+#define IRQ_PH2			BFIN_PH_IRQ(2)
+#define IRQ_PH3			BFIN_PH_IRQ(3)
+#define IRQ_PH4			BFIN_PH_IRQ(4)
+#define IRQ_PH5			BFIN_PH_IRQ(5)
+#define IRQ_PH6			BFIN_PH_IRQ(6)
+#define IRQ_PH7			BFIN_PH_IRQ(7)
+#define IRQ_PH8			BFIN_PH_IRQ(8)
+#define IRQ_PH9			BFIN_PH_IRQ(9)
+#define IRQ_PH10		BFIN_PH_IRQ(10)
+#define IRQ_PH11		BFIN_PH_IRQ(11)
+#define IRQ_PH12		BFIN_PH_IRQ(12)
+#define IRQ_PH13		BFIN_PH_IRQ(13)
+#define IRQ_PH14		BFIN_PH_IRQ(14)		/* N/A */
+#define IRQ_PH15		BFIN_PH_IRQ(15)		/* N/A */
+
+#define BFIN_PI_IRQ(x)		((x) + IRQ_PH15 + 1)
+#define IRQ_PI0			BFIN_PI_IRQ(0)
+#define IRQ_PI1			BFIN_PI_IRQ(1)
+#define IRQ_PI2			BFIN_PI_IRQ(2)
+#define IRQ_PI3			BFIN_PI_IRQ(3)
+#define IRQ_PI4			BFIN_PI_IRQ(4)
+#define IRQ_PI5			BFIN_PI_IRQ(5)
+#define IRQ_PI6			BFIN_PI_IRQ(6)
+#define IRQ_PI7			BFIN_PI_IRQ(7)
+#define IRQ_PI8			BFIN_PI_IRQ(8)
+#define IRQ_PI9			BFIN_PI_IRQ(9)
+#define IRQ_PI10		BFIN_PI_IRQ(10)
+#define IRQ_PI11		BFIN_PI_IRQ(11)
+#define IRQ_PI12		BFIN_PI_IRQ(12)
+#define IRQ_PI13		BFIN_PI_IRQ(13)
+#define IRQ_PI14		BFIN_PI_IRQ(14)
+#define IRQ_PI15		BFIN_PI_IRQ(15)
+
+#define BFIN_PJ_IRQ(x)		((x) + IRQ_PI15 + 1)
+#define IRQ_PJ0			BFIN_PJ_IRQ(0)
+#define IRQ_PJ1			BFIN_PJ_IRQ(1)
+#define IRQ_PJ2			BFIN_PJ_IRQ(2)
+#define IRQ_PJ3			BFIN_PJ_IRQ(3)
+#define IRQ_PJ4			BFIN_PJ_IRQ(4)
+#define IRQ_PJ5			BFIN_PJ_IRQ(5)
+#define IRQ_PJ6			BFIN_PJ_IRQ(6)
+#define IRQ_PJ7			BFIN_PJ_IRQ(7)
+#define IRQ_PJ8			BFIN_PJ_IRQ(8)
+#define IRQ_PJ9			BFIN_PJ_IRQ(9)
+#define IRQ_PJ10		BFIN_PJ_IRQ(10)
+#define IRQ_PJ11		BFIN_PJ_IRQ(11)
+#define IRQ_PJ12		BFIN_PJ_IRQ(12)
+#define IRQ_PJ13		BFIN_PJ_IRQ(13)
+#define IRQ_PJ14		BFIN_PJ_IRQ(14)		/* N/A */
+#define IRQ_PJ15		BFIN_PJ_IRQ(15)		/* N/A */
+
+#define GPIO_IRQ_BASE	IRQ_PA0
 
 #ifdef CONFIG_IRQCHIP_DEMUX_GPIO
 #define NR_IRQS     (IRQ_PJ15+1)
@@ -343,6 +344,34 @@ Events         (highest priority)  EMU         0
 #define NR_IRQS     (SYS_IRQS+1)
 #endif
 
+/* For compatibility reasons with existing code */
+
+#define IRQ_DMAC0_ERR 		IRQ_DMAC0_ERROR
+#define IRQ_EPPI0_ERR 		IRQ_EPPI0_ERROR
+#define IRQ_SPORT0_ERR		IRQ_SPORT0_ERROR
+#define IRQ_SPORT1_ERR		IRQ_SPORT1_ERROR
+#define IRQ_SPI0_ERR  		IRQ_SPI0_ERROR
+#define IRQ_UART0_ERR 		IRQ_UART0_ERROR
+#define IRQ_DMAC1_ERR 		IRQ_DMAC1_ERROR
+#define IRQ_SPORT2_ERR		IRQ_SPORT2_ERROR
+#define IRQ_SPORT3_ERR		IRQ_SPORT3_ERROR
+#define IRQ_SPI1_ERR  		IRQ_SPI1_ERROR
+#define IRQ_SPI2_ERR  		IRQ_SPI2_ERROR
+#define IRQ_UART1_ERR 		IRQ_UART1_ERROR
+#define IRQ_UART2_ERR 		IRQ_UART2_ERROR
+#define IRQ_CAN0_ERR  		IRQ_CAN0_ERROR
+#define IRQ_MXVR_ERR  		IRQ_MXVR_ERROR
+#define IRQ_EPP1_ERR  		IRQ_EPP1_ERROR
+#define IRQ_EPP2_ERR  		IRQ_EPP2_ERROR
+#define IRQ_UART3_ERR 		IRQ_UART3_ERROR
+#define IRQ_HOST_ERR  		IRQ_HOST_ERROR
+#define IRQ_PIXC_ERR  		IRQ_PIXC_ERROR
+#define IRQ_NFC_ERR   		IRQ_NFC_ERROR
+#define IRQ_ATAPI_ERR 		IRQ_ATAPI_ERROR
+#define IRQ_CAN1_ERR  		IRQ_CAN1_ERROR
+#define IRQ_HS_DMA_ERR		IRQ_HS_DMA_ERROR
+
+
 #define IVG7            7
 #define IVG8            8
 #define IVG9            9
diff --git a/include/asm-blackfin/mach-bf548/mem_map.h b/include/asm-blackfin/mach-bf548/mem_map.h
index 72d80e8a6e81..ec1597e31831 100644
--- a/include/asm-blackfin/mach-bf548/mem_map.h
+++ b/include/asm-blackfin/mach-bf548/mem_map.h
@@ -51,10 +51,10 @@
 /* Level 1 Memory */
 
 /* Memory Map for ADSP-BF548 processors */
-#ifdef CONFIG_BLKFIN_ICACHE
-#define BLKFIN_ICACHESIZE	(16*1024)
+#ifdef CONFIG_BFIN_ICACHE
+#define BFIN_ICACHESIZE	(16*1024)
 #else
-#define BLKFIN_ICACHESIZE	(0*1024)
+#define BFIN_ICACHESIZE	(0*1024)
 #endif
 
 #define L1_CODE_START       0xFFA00000
@@ -63,29 +63,29 @@
 
 #define L1_CODE_LENGTH      0xC000
 
-#ifdef CONFIG_BLKFIN_DCACHE
+#ifdef CONFIG_BFIN_DCACHE
 
-#ifdef CONFIG_BLKFIN_DCACHE_BANKA
+#ifdef CONFIG_BFIN_DCACHE_BANKA
 #define DMEM_CNTR (ACACHE_BSRAM | ENDCPLB | PORT_PREF0)
 #define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
 #define L1_DATA_B_LENGTH      0x8000
-#define BLKFIN_DCACHESIZE	(16*1024)
-#define BLKFIN_DSUPBANKS	1
+#define BFIN_DCACHESIZE	(16*1024)
+#define BFIN_DSUPBANKS	1
 #else
 #define DMEM_CNTR (ACACHE_BCACHE | ENDCPLB | PORT_PREF0)
 #define L1_DATA_A_LENGTH      (0x8000 - 0x4000)
 #define L1_DATA_B_LENGTH      (0x8000 - 0x4000)
-#define BLKFIN_DCACHESIZE	(32*1024)
-#define BLKFIN_DSUPBANKS	2
+#define BFIN_DCACHESIZE	(32*1024)
+#define BFIN_DSUPBANKS	2
 #endif
 
 #else
 #define DMEM_CNTR (ASRAM_BSRAM | ENDCPLB | PORT_PREF0)
 #define L1_DATA_A_LENGTH      0x8000
 #define L1_DATA_B_LENGTH      0x8000
-#define BLKFIN_DCACHESIZE	(0*1024)
-#define BLKFIN_DSUPBANKS	0
-#endif /*CONFIG_BLKFIN_DCACHE*/
+#define BFIN_DCACHESIZE	(0*1024)
+#define BFIN_DSUPBANKS	0
+#endif /*CONFIG_BFIN_DCACHE*/
 
 /* Scratch Pad Memory */