parisc: move include/asm-parisc to arch/parisc/include/asm

1 files changed, 0 insertions, 182 deletions

diff --git a/include/asm-parisc/system.h b/include/asm-parisc/system.h
deleted file mode 100644
index ee80c920b464..000000000000
--- a/include/asm-parisc/system.h
+++ /dev/null
@@ -1,182 +0,0 @@
-#ifndef __PARISC_SYSTEM_H
-#define __PARISC_SYSTEM_H
-
-#include <asm/psw.h>
-
-/* The program status word as bitfields.  */
-struct pa_psw {
-	unsigned int y:1;
-	unsigned int z:1;
-	unsigned int rv:2;
-	unsigned int w:1;
-	unsigned int e:1;
-	unsigned int s:1;
-	unsigned int t:1;
-
-	unsigned int h:1;
-	unsigned int l:1;
-	unsigned int n:1;
-	unsigned int x:1;
-	unsigned int b:1;
-	unsigned int c:1;
-	unsigned int v:1;
-	unsigned int m:1;
-
-	unsigned int cb:8;
-
-	unsigned int o:1;
-	unsigned int g:1;
-	unsigned int f:1;
-	unsigned int r:1;
-	unsigned int q:1;
-	unsigned int p:1;
-	unsigned int d:1;
-	unsigned int i:1;
-};
-
-#ifdef CONFIG_64BIT
-#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW + 4))
-#else
-#define pa_psw(task) ((struct pa_psw *) ((char *) (task) + TASK_PT_PSW))
-#endif
-
-struct task_struct;
-
-extern struct task_struct *_switch_to(struct task_struct *, struct task_struct *);
-
-#define switch_to(prev, next, last) do {			\
-	(last) = _switch_to(prev, next);			\
-} while(0)
-
-/* interrupt control */
-#define local_save_flags(x)	__asm__ __volatile__("ssm 0, %0" : "=r" (x) : : "memory")
-#define local_irq_disable()	__asm__ __volatile__("rsm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
-#define local_irq_enable()	__asm__ __volatile__("ssm %0,%%r0\n" : : "i" (PSW_I) : "memory" )
-
-#define local_irq_save(x) \
-	__asm__ __volatile__("rsm %1,%0" : "=r" (x) :"i" (PSW_I) : "memory" )
-#define local_irq_restore(x) \
-	__asm__ __volatile__("mtsm %0" : : "r" (x) : "memory" )
-
-#define irqs_disabled()			\
-({					\
-	unsigned long flags;		\
-	local_save_flags(flags);	\
-	(flags & PSW_I) == 0;		\
-})
-
-#define mfctl(reg)	({		\
-	unsigned long cr;		\
-	__asm__ __volatile__(		\
-		"mfctl " #reg ",%0" :	\
-		 "=r" (cr)		\
-	);				\
-	cr;				\
-})
-
-#define mtctl(gr, cr) \
-	__asm__ __volatile__("mtctl %0,%1" \
-		: /* no outputs */ \
-		: "r" (gr), "i" (cr) : "memory")
-
-/* these are here to de-mystefy the calling code, and to provide hooks */
-/* which I needed for debugging EIEM problems -PB */
-#define get_eiem() mfctl(15)
-static inline void set_eiem(unsigned long val)
-{
-	mtctl(val, 15);
-}
-
-#define mfsp(reg)	({		\
-	unsigned long cr;		\
-	__asm__ __volatile__(		\
-		"mfsp " #reg ",%0" :	\
-		 "=r" (cr)		\
-	);				\
-	cr;				\
-})
-
-#define mtsp(gr, cr) \
-	__asm__ __volatile__("mtsp %0,%1" \
-		: /* no outputs */ \
-		: "r" (gr), "i" (cr) : "memory")
-
-
-/*
-** This is simply the barrier() macro from linux/kernel.h but when serial.c
-** uses tqueue.h uses smp_mb() defined using barrier(), linux/kernel.h
-** hasn't yet been included yet so it fails, thus repeating the macro here.
-**
-** PA-RISC architecture allows for weakly ordered memory accesses although
-** none of the processors use it. There is a strong ordered bit that is
-** set in the O-bit of the page directory entry. Operating systems that
-** can not tolerate out of order accesses should set this bit when mapping
-** pages. The O-bit of the PSW should also be set to 1 (I don't believe any
-** of the processor implemented the PSW O-bit). The PCX-W ERS states that
-** the TLB O-bit is not implemented so the page directory does not need to
-** have the O-bit set when mapping pages (section 3.1). This section also
-** states that the PSW Y, Z, G, and O bits are not implemented.
-** So it looks like nothing needs to be done for parisc-linux (yet).
-** (thanks to chada for the above comment -ggg)
-**
-** The __asm__ op below simple prevents gcc/ld from reordering
-** instructions across the mb() "call".
-*/
-#define mb()		__asm__ __volatile__("":::"memory")	/* barrier() */
-#define rmb()		mb()
-#define wmb()		mb()
-#define smp_mb()	mb()
-#define smp_rmb()	mb()
-#define smp_wmb()	mb()
-#define smp_read_barrier_depends()	do { } while(0)
-#define read_barrier_depends()		do { } while(0)
-
-#define set_mb(var, value)		do { var = value; mb(); } while (0)
-
-#ifndef CONFIG_PA20
-/* Because kmalloc only guarantees 8-byte alignment for kmalloc'd data,
-   and GCC only guarantees 8-byte alignment for stack locals, we can't
-   be assured of 16-byte alignment for atomic lock data even if we
-   specify "__attribute ((aligned(16)))" in the type declaration.  So,
-   we use a struct containing an array of four ints for the atomic lock
-   type and dynamically select the 16-byte aligned int from the array
-   for the semaphore.  */
-
-#define __PA_LDCW_ALIGNMENT	16
-#define __ldcw_align(a) ({					\
-	unsigned long __ret = (unsigned long) &(a)->lock[0];	\
-	__ret = (__ret + __PA_LDCW_ALIGNMENT - 1)		\
-		& ~(__PA_LDCW_ALIGNMENT - 1);			\
-	(volatile unsigned int *) __ret;			\
-})
-#define __LDCW	"ldcw"
-
-#else /*CONFIG_PA20*/
-/* From: "Jim Hull" <jim.hull of hp.com>
-   I've attached a summary of the change, but basically, for PA 2.0, as
-   long as the ",CO" (coherent operation) completer is specified, then the
-   16-byte alignment requirement for ldcw and ldcd is relaxed, and instead
-   they only require "natural" alignment (4-byte for ldcw, 8-byte for
-   ldcd). */
-
-#define __PA_LDCW_ALIGNMENT	4
-#define __ldcw_align(a) ((volatile unsigned int *)a)
-#define __LDCW	"ldcw,co"
-
-#endif /*!CONFIG_PA20*/
-
-/* LDCW, the only atomic read-write operation PA-RISC has. *sigh*.  */
-#define __ldcw(a) ({						\
-	unsigned __ret;						\
-	__asm__ __volatile__(__LDCW " 0(%1),%0"			\
-		: "=r" (__ret) : "r" (a));			\
-	__ret;							\
-})
-
-#ifdef CONFIG_SMP
-# define __lock_aligned __attribute__((__section__(".data.lock_aligned")))
-#endif
-
-#define arch_align_stack(x) (x)
-
-#endif