Merge tag 'tegra-for-3.14-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt

From Stephen Warren:
ARM: tegra: device tree changes

This branch contains all the changes to Tegra's device tree. The
highlights are:

* Many patches for Tegra124 SoC support, and the Venice2 board which
  uses that SoC.
* Conversion to use more headers providing named constants for pinctrl
  and key codes, which improves readability.
* A few cleanups.

This branch is based on tag tegra-for-3.14-dmas-resets-rework in order
to avoid conflicts with the DT changes required to use the common
bindings for DMAs and resets.

* tag 'tegra-for-3.14-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (24 commits)
  ARM: tegra: Add SPI controller nodes for Tegra124
  ARM: tegra: Fix misconfiguration of pin PH2 on Venice2
  ARM: tegra: fix pinctrl misconfiguration on Venice2
  ARM: tegra: add default pinctrl nodes for Venice2
  ARM: tegra: correct Colibri T20 regulator settings
  ARM: tegra: convert dts files of Tegra30 platforms to use pinctrl defines
  ARM: tegra: convert dts files of Tegra20 platforms to use pinctrl defines
  ARM: tegra: convert dts files of Tegra114 platforms to use pinctrl defines
  ARM: tegra: Add header file for pinctrl constants
  ARM: tegra: convert device tree files to use key defines
  ARM: tegra: Enable PWM on Venice2
  ARM: tegra: Add Tegra124 PWM support
  ARM: tegra: add sound card to Venice2 DT
  ARM: tegra: add audio-related device to Tegra124 DT
  ARM: tegra: enable I2C controllers on Venice2
  ARM: tegra: add I2C controllers to Tegra124 DT
  ARM: tegra: add MMC controllers to Tegra124 DT
  ARM: tegra: add Tegra124 pinmux node to DT
  ARM: tegra: add APB DMA controller to Tegra124 DT
  ARM: tegra: add reset properties to Tegra124 DTs
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

2 files changed, 46 insertions, 0 deletions

diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h
index 4d179c00f081..197dc28b676e 100644
--- a/include/dt-bindings/gpio/tegra-gpio.h
+++ b/include/dt-bindings/gpio/tegra-gpio.h
@@ -43,6 +43,7 @@
 #define TEGRA_GPIO_BANK_ID_CC 28
 #define TEGRA_GPIO_BANK_ID_DD 29
 #define TEGRA_GPIO_BANK_ID_EE 30
+#define TEGRA_GPIO_BANK_ID_FF 31
 
 #define TEGRA_GPIO(bank, offset) \
 	((TEGRA_GPIO_BANK_ID_##bank * 8) + offset)
diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra.h b/include/dt-bindings/pinctrl/pinctrl-tegra.h
new file mode 100644
index 000000000000..ebafa498be0f
--- /dev/null
+++ b/include/dt-bindings/pinctrl/pinctrl-tegra.h
@@ -0,0 +1,45 @@
+/*
+ * This header provides constants for Tegra pinctrl bindings.
+ *
+ * Copyright (c) 2013, NVIDIA CORPORATION.  All rights reserved.
+ *
+ * Author: Laxman Dewangan <ldewangan@nvidia.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H
+#define _DT_BINDINGS_PINCTRL_TEGRA_H
+
+/*
+ * Enable/disable for diffeent dt properties. This is applicable for
+ * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain,
+ * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt.
+ */
+#define TEGRA_PIN_DISABLE				0
+#define TEGRA_PIN_ENABLE				1
+
+#define TEGRA_PIN_PULL_NONE				0
+#define TEGRA_PIN_PULL_DOWN				1
+#define TEGRA_PIN_PULL_UP				2
+
+/* Low power mode driver */
+#define TEGRA_PIN_LP_DRIVE_DIV_8			0
+#define TEGRA_PIN_LP_DRIVE_DIV_4			1
+#define TEGRA_PIN_LP_DRIVE_DIV_2			2
+#define TEGRA_PIN_LP_DRIVE_DIV_1			3
+
+/* Rising/Falling slew rate */
+#define TEGRA_PIN_SLEW_RATE_FASTEST			0
+#define TEGRA_PIN_SLEW_RATE_FAST			1
+#define TEGRA_PIN_SLEW_RATE_SLOW			2
+#define TEGRA_PIN_SLEW_RATE_SLOWEST			3
+
+#endif