aboutsummaryrefslogtreecommitdiffstats
path: root/include/dt-bindings
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2018-06-05 16:11:43 -0700
committerLinus Torvalds <torvalds@linux-foundation.org>2018-06-05 16:11:43 -0700
commitf60342fac9fae20ada2cd5faadbc2a1337cae03f (patch)
treefe64b1cb3ea699d819e5e808264903aee2d8dc9a /include/dt-bindings
parentMerge tag 'leds_for_4.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds (diff)
parentmmc: renesas_sdhi: really fix WP logic regressions (diff)
downloadlinux-dev-f60342fac9fae20ada2cd5faadbc2a1337cae03f.tar.xz
linux-dev-f60342fac9fae20ada2cd5faadbc2a1337cae03f.zip
Merge tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc
Pull MMC updates from Ulf Hansson: "MMC core: - Decrease polling rate for erase/trim/discard - Allow non-sleeping GPIOs for card detect - Improve mmc block removal path - Enable support for mmc_sw_reset() for SDIO cards - Add mmc_sw_reset() to allow users to do a soft reset of the card - Allow power delay to be tunable via DT - Allow card detect debounce delay to be tunable via DT - Enable new quirk to limit clock rate for Marvell 8887 chip - Don't show eMMC RPMB and BOOT areas in /proc/partitions - Add capability to avoid 3.3V signaling for fragile HWs MMC host: - Improve/fixup support for handle highmem pages - Remove depends on HAS_DMA in case of platform dependency - mvsdio: Enable support for erase/trim/discard - rtsx_usb: Enable support for erase/trim/discard - renesas_sdhi: Fix WP logic regressions - renesas_sdhi: Add r8a77965 support - renesas_sdhi: Add R8A77980 to whitelist - meson: Add optional support for device reset - meson: Add support for the Meson-AXG platform - dw_mmc: Add new driver for BlueField DW variant - mediatek: Add support for 64G DRAM DMA - sunxi: Deploy runtime PM support - jz4740: Add support for JZ4780 - jz4740: Enable support for DT based platforms - sdhci: Various improvement to timeout handling - sdhci: Disable support for HS200/HS400/UHS when no 1.8V support - sdhci-omap: Add support for controller in k2g SoC - sdhci-omap: Add workarounds for a couple of Erratas - sdhci-omap: Enable support for generic sdhci DT properties - sdhci-cadence: Re-send tune request to deal with errata - sdhci-pci: Fix 3.3V voltage switch for some BYT-based Intel controllers - sdhci-pci: Avoid 3.3V signaling on some NI 904x - sdhci-esdhc-imx: Use watermark levels for PIO access - sdhci-msm: Improve card detection handling - sdhci-msm: Add support voltage pad switching" * tag 'mmc-v4.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (104 commits) mmc: renesas_sdhi: really fix WP logic regressions mmc: mvsdio: Enable MMC_CAP_ERASE mmc: mvsdio: Respect card busy time out from mmc core mmc: sdhci-msm: Remove NO_CARD_NO_RESET quirk mmc: sunxi: Use ifdef rather than __maybe_unused mmc: mxmmc: Use ifdef rather than __maybe_unused mmc: mxmmc: include linux/highmem.h mmc: sunxi: mark PM functions as __maybe_unused mmc: Throttle calls to MMC_SEND_STATUS during mmc_do_erase() mmc: au1xmmc: handle highmem pages mmc: Allow non-sleeping GPIO cd mmc: sdhci-*: Don't emit error msg if sdhci_add_host() fails mmc: sd: Define name for default speed dtr mmc: core: Move calls to ->prepare_hs400_tuning() closer to mmc code mmc: sdhci-xenon: use match_string() helper mmc: wbsd: handle highmem pages mmc: ushc: handle highmem pages mmc: mxcmmc: handle highmem pages mmc: atmel-mci: use sg_copy_{from,to}_buffer mmc: android-goldfish: use sg_copy_{from,to}_buffer ...
Diffstat (limited to 'include/dt-bindings')
-rw-r--r--include/dt-bindings/dma/jz4780-dma.h49
1 files changed, 49 insertions, 0 deletions
diff --git a/include/dt-bindings/dma/jz4780-dma.h b/include/dt-bindings/dma/jz4780-dma.h
new file mode 100644
index 000000000000..df017fdfb44e
--- /dev/null
+++ b/include/dt-bindings/dma/jz4780-dma.h
@@ -0,0 +1,49 @@
+#ifndef __DT_BINDINGS_DMA_JZ4780_DMA_H__
+#define __DT_BINDINGS_DMA_JZ4780_DMA_H__
+
+/*
+ * Request type numbers for the JZ4780 DMA controller (written to the DRTn
+ * register for the channel).
+ */
+#define JZ4780_DMA_I2S1_TX 0x4
+#define JZ4780_DMA_I2S1_RX 0x5
+#define JZ4780_DMA_I2S0_TX 0x6
+#define JZ4780_DMA_I2S0_RX 0x7
+#define JZ4780_DMA_AUTO 0x8
+#define JZ4780_DMA_SADC_RX 0x9
+#define JZ4780_DMA_UART4_TX 0xc
+#define JZ4780_DMA_UART4_RX 0xd
+#define JZ4780_DMA_UART3_TX 0xe
+#define JZ4780_DMA_UART3_RX 0xf
+#define JZ4780_DMA_UART2_TX 0x10
+#define JZ4780_DMA_UART2_RX 0x11
+#define JZ4780_DMA_UART1_TX 0x12
+#define JZ4780_DMA_UART1_RX 0x13
+#define JZ4780_DMA_UART0_TX 0x14
+#define JZ4780_DMA_UART0_RX 0x15
+#define JZ4780_DMA_SSI0_TX 0x16
+#define JZ4780_DMA_SSI0_RX 0x17
+#define JZ4780_DMA_SSI1_TX 0x18
+#define JZ4780_DMA_SSI1_RX 0x19
+#define JZ4780_DMA_MSC0_TX 0x1a
+#define JZ4780_DMA_MSC0_RX 0x1b
+#define JZ4780_DMA_MSC1_TX 0x1c
+#define JZ4780_DMA_MSC1_RX 0x1d
+#define JZ4780_DMA_MSC2_TX 0x1e
+#define JZ4780_DMA_MSC2_RX 0x1f
+#define JZ4780_DMA_PCM0_TX 0x20
+#define JZ4780_DMA_PCM0_RX 0x21
+#define JZ4780_DMA_SMB0_TX 0x24
+#define JZ4780_DMA_SMB0_RX 0x25
+#define JZ4780_DMA_SMB1_TX 0x26
+#define JZ4780_DMA_SMB1_RX 0x27
+#define JZ4780_DMA_SMB2_TX 0x28
+#define JZ4780_DMA_SMB2_RX 0x29
+#define JZ4780_DMA_SMB3_TX 0x2a
+#define JZ4780_DMA_SMB3_RX 0x2b
+#define JZ4780_DMA_SMB4_TX 0x2c
+#define JZ4780_DMA_SMB4_RX 0x2d
+#define JZ4780_DMA_DES_TX 0x2e
+#define JZ4780_DMA_DES_RX 0x2f
+
+#endif /* __DT_BINDINGS_DMA_JZ4780_DMA_H__ */