diff options
| author |   Florian Fainelli <f.fainelli@gmail.com> | 2021-09-20 14:54:14 -0700 |
|---|---|---|
| committer |   David S. Miller <davem@davemloft.net> | 2021-09-21 10:58:35 +0100 |
| commit | d6da08ed1425180b8d54c828ec06d247fd915d60 (patch) | |
| tree | 46ce25e8ee10da0280a1f8ab79966a61e77f2581 /include/linux/brcmphy.h | |
| parent | net/ipv4/syncookies.c: remove superfluous header files from syncookies.c (diff) | |
| download | linux-dev-d6da08ed1425180b8d54c828ec06d247fd915d60.tar.xz linux-dev-d6da08ed1425180b8d54c828ec06d247fd915d60.zip | |
net: phy: broadcom: Add IDDQ-SR mode
Add support for putting the PHY into IDDQ Soft Recovery mode by setting
the TOP_MISC register bits accordingly. This requires us to implement a
custom bcm54xx_suspend() routine which diverges from genphy_suspend() in
order to configure the PHY to enter IDDQ with software recovery as well
as avoid doing a read/modify/write on the BMCR register.
Doing a read/modify/write on the BMCR register means that the
auto-negotation bit may remain which interferes with the ability to put
the PHY into IDDQ-SR mode. We do software reset upon suspend in order to
put the PHY back into its state prior to suspend as recommended by the
datasheet.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Diffstat (limited to 'include/linux/brcmphy.h')
| -rw-r--r-- | include/linux/brcmphy.h | 8 |
1 files changed, 8 insertions, 0 deletions
diff --git a/include/linux/brcmphy.h b/include/linux/brcmphy.h index 07e1dfadbbdf..b119d6819d6c 100644 --- a/include/linux/brcmphy.h +++ b/include/linux/brcmphy.h @@ -67,6 +67,7 @@ #define PHY_BRCM_CLEAR_RGMII_MODE 0x00000004 #define PHY_BRCM_DIS_TXCRXC_NOENRGY 0x00000008 #define PHY_BRCM_EN_MASTER_MODE 0x00000010 +#define PHY_BRCM_IDDQ_SUSPEND 0x000000220 /* Broadcom BCM7xxx specific workarounds */ #define PHY_BRCM_7XXX_REV(x) (((x) >> 8) & 0xff) @@ -84,6 +85,7 @@ #define MII_BCM54XX_EXP_DATA 0x15 /* Expansion register data */ #define MII_BCM54XX_EXP_SEL 0x17 /* Expansion register select */ +#define MII_BCM54XX_EXP_SEL_TOP 0x0d00 /* TOP_MISC expansion register select */ #define MII_BCM54XX_EXP_SEL_SSD 0x0e00 /* Secondary SerDes select */ #define MII_BCM54XX_EXP_SEL_ER 0x0f00 /* Expansion register select */ #define MII_BCM54XX_EXP_SEL_ETC 0x0d00 /* Expansion register spare + 2k mem */ @@ -243,6 +245,12 @@ #define MII_BCM54XX_EXP_EXP97 0x0f97 #define MII_BCM54XX_EXP_EXP97_MYST 0x0c0c +/* Top-MISC expansion registers */ +#define BCM54XX_TOP_MISC_IDDQ_CTRL (MII_BCM54XX_EXP_SEL_TOP + 0x06) +#define BCM54XX_TOP_MISC_IDDQ_LP (1 << 0) +#define BCM54XX_TOP_MISC_IDDQ_SD (1 << 2) +#define BCM54XX_TOP_MISC_IDDQ_SR (1 << 3) + /* * BCM5482: Secondary SerDes registers */ |