Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

1 files changed, 359 insertions, 8 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 5d3e48d02033..fe15f831841b 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -9,7 +9,7 @@
  * Copyright (c) 2006, Michael Wu <flamingice@sourmilk.net>
  * Copyright (c) 2013 - 2014 Intel Mobile Communications GmbH
  * Copyright (c) 2016 - 2017 Intel Deutschland GmbH
- * Copyright (c) 2018 - 2019 Intel Corporation
+ * Copyright (c) 2018 - 2020 Intel Corporation
  */
 
 #ifndef LINUX_IEEE80211_H
@@ -105,6 +105,51 @@
 
 /* extension, added by 802.11ad */
 #define IEEE80211_STYPE_DMG_BEACON		0x0000
+#define IEEE80211_STYPE_S1G_BEACON		0x0010
+
+/* bits unique to S1G beacon */
+#define IEEE80211_S1G_BCN_NEXT_TBTT	0x100
+
+/* see 802.11ah-2016 9.9 NDP CMAC frames */
+#define IEEE80211_S1G_1MHZ_NDP_BITS	25
+#define IEEE80211_S1G_1MHZ_NDP_BYTES	4
+#define IEEE80211_S1G_2MHZ_NDP_BITS	37
+#define IEEE80211_S1G_2MHZ_NDP_BYTES	5
+
+#define IEEE80211_NDP_FTYPE_CTS			0
+#define IEEE80211_NDP_FTYPE_CF_END		0
+#define IEEE80211_NDP_FTYPE_PS_POLL		1
+#define IEEE80211_NDP_FTYPE_ACK			2
+#define IEEE80211_NDP_FTYPE_PS_POLL_ACK		3
+#define IEEE80211_NDP_FTYPE_BA			4
+#define IEEE80211_NDP_FTYPE_BF_REPORT_POLL	5
+#define IEEE80211_NDP_FTYPE_PAGING		6
+#define IEEE80211_NDP_FTYPE_PREQ		7
+
+#define SM64(f, v)	((((u64)v) << f##_S) & f)
+
+/* NDP CMAC frame fields */
+#define IEEE80211_NDP_FTYPE                    0x0000000000000007
+#define IEEE80211_NDP_FTYPE_S                  0x0000000000000000
+
+/* 1M Probe Request 11ah 9.9.3.1.1 */
+#define IEEE80211_NDP_1M_PREQ_ANO      0x0000000000000008
+#define IEEE80211_NDP_1M_PREQ_ANO_S                     3
+#define IEEE80211_NDP_1M_PREQ_CSSID    0x00000000000FFFF0
+#define IEEE80211_NDP_1M_PREQ_CSSID_S                   4
+#define IEEE80211_NDP_1M_PREQ_RTYPE    0x0000000000100000
+#define IEEE80211_NDP_1M_PREQ_RTYPE_S                  20
+#define IEEE80211_NDP_1M_PREQ_RSV      0x0000000001E00000
+#define IEEE80211_NDP_1M_PREQ_RSV      0x0000000001E00000
+/* 2M Probe Request 11ah 9.9.3.1.2 */
+#define IEEE80211_NDP_2M_PREQ_ANO      0x0000000000000008
+#define IEEE80211_NDP_2M_PREQ_ANO_S                     3
+#define IEEE80211_NDP_2M_PREQ_CSSID    0x0000000FFFFFFFF0
+#define IEEE80211_NDP_2M_PREQ_CSSID_S                   4
+#define IEEE80211_NDP_2M_PREQ_RTYPE    0x0000001000000000
+#define IEEE80211_NDP_2M_PREQ_RTYPE_S                  36
+
+#define IEEE80211_ANO_NETTYPE_WILD              15
 
 /* control extension - for IEEE80211_FTYPE_CTL | IEEE80211_STYPE_CTL_EXT */
 #define IEEE80211_CTL_EXT_POLL		0x2000
@@ -121,6 +166,21 @@
 #define IEEE80211_MAX_SN		IEEE80211_SN_MASK
 #define IEEE80211_SN_MODULO		(IEEE80211_MAX_SN + 1)
 
+
+/* PV1 Layout 11ah 9.8.3.1 */
+#define IEEE80211_PV1_FCTL_VERS		0x0003
+#define IEEE80211_PV1_FCTL_FTYPE	0x001c
+#define IEEE80211_PV1_FCTL_STYPE	0x00e0
+#define IEEE80211_PV1_FCTL_TODS		0x0100
+#define IEEE80211_PV1_FCTL_MOREFRAGS	0x0200
+#define IEEE80211_PV1_FCTL_PM		0x0400
+#define IEEE80211_PV1_FCTL_MOREDATA	0x0800
+#define IEEE80211_PV1_FCTL_PROTECTED	0x1000
+#define IEEE80211_PV1_FCTL_END_SP       0x2000
+#define IEEE80211_PV1_FCTL_RELAYED      0x4000
+#define IEEE80211_PV1_FCTL_ACK_POLICY   0x8000
+#define IEEE80211_PV1_FCTL_CTL_EXT	0x0f00
+
 static inline bool ieee80211_sn_less(u16 sn1, u16 sn2)
 {
 	return ((sn1 - sn2) & IEEE80211_SN_MASK) > (IEEE80211_SN_MODULO >> 1);
@@ -148,6 +208,7 @@ static inline u16 ieee80211_sn_sub(u16 sn1, u16 sn2)
 #define IEEE80211_MAX_FRAG_THRESHOLD	2352
 #define IEEE80211_MAX_RTS_THRESHOLD	2353
 #define IEEE80211_MAX_AID		2007
+#define IEEE80211_MAX_AID_S1G		8191
 #define IEEE80211_MAX_TIM_LEN		251
 #define IEEE80211_MAX_MESH_PEERINGS	63
 /* Maximum size for the MA-UNITDATA primitive, 802.11 standard section
@@ -372,6 +433,17 @@ static inline bool ieee80211_is_data(__le16 fc)
 }
 
 /**
+ * ieee80211_is_ext - check if type is IEEE80211_FTYPE_EXT
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_ext(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_EXT);
+}
+
+
+/**
  * ieee80211_is_data_qos - check if type is IEEE80211_FTYPE_DATA and IEEE80211_STYPE_QOS_DATA is set
  * @fc: frame control bytes in little-endian byteorder
  */
@@ -470,6 +542,18 @@ static inline bool ieee80211_is_beacon(__le16 fc)
 }
 
 /**
+ * ieee80211_is_s1g_beacon - check if IEEE80211_FTYPE_EXT &&
+ * IEEE80211_STYPE_S1G_BEACON
+ * @fc: frame control bytes in little-endian byteorder
+ */
+static inline bool ieee80211_is_s1g_beacon(__le16 fc)
+{
+	return (fc & cpu_to_le16(IEEE80211_FCTL_FTYPE |
+				 IEEE80211_FCTL_STYPE)) ==
+	       cpu_to_le16(IEEE80211_FTYPE_EXT | IEEE80211_STYPE_S1G_BEACON);
+}
+
+/**
  * ieee80211_is_atim - check if IEEE80211_FTYPE_MGMT && IEEE80211_STYPE_ATIM
  * @fc: frame control bytes in little-endian byteorder
  */
@@ -716,7 +800,7 @@ struct ieee80211_msrment_ie {
 	u8 token;
 	u8 mode;
 	u8 type;
-	u8 request[0];
+	u8 request[];
 } __packed;
 
 /**
@@ -859,6 +943,7 @@ enum ieee80211_ht_chanwidth_values {
  * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ: 40 MHz channel width
  * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ: 80 MHz channel width
  * @IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ: 160 MHz or 80+80 MHz channel width
+ * @IEEE80211_OPMODE_NOTIF_BW_160_80P80: 160 / 80+80 MHz indicator flag
  * @IEEE80211_OPMODE_NOTIF_RX_NSS_MASK: number of spatial streams mask
  *	(the NSS value is the value of this field + 1)
  * @IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT: number of spatial streams shift
@@ -866,11 +951,12 @@ enum ieee80211_ht_chanwidth_values {
  *	using a beamforming steering matrix
  */
 enum ieee80211_vht_opmode_bits {
-	IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK	= 3,
+	IEEE80211_OPMODE_NOTIF_CHANWIDTH_MASK	= 0x03,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_20MHZ	= 0,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_40MHZ	= 1,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_80MHZ	= 2,
 	IEEE80211_OPMODE_NOTIF_CHANWIDTH_160MHZ	= 3,
+	IEEE80211_OPMODE_NOTIF_BW_160_80P80	= 0x04,
 	IEEE80211_OPMODE_NOTIF_RX_NSS_MASK	= 0x70,
 	IEEE80211_OPMODE_NOTIF_RX_NSS_SHIFT	= 4,
 	IEEE80211_OPMODE_NOTIF_RX_NSS_TYPE_BF	= 0x80,
@@ -898,6 +984,59 @@ struct ieee80211_addba_ext_ie {
 	u8 data;
 } __packed;
 
+/**
+ * struct ieee80211_s1g_bcn_compat_ie
+ *
+ * S1G Beacon Compatibility element
+ */
+struct ieee80211_s1g_bcn_compat_ie {
+	__le16 compat_info;
+	__le16 beacon_int;
+	__le32 tsf_completion;
+} __packed;
+
+/**
+ * struct ieee80211_s1g_oper_ie
+ *
+ * S1G Operation element
+ */
+struct ieee80211_s1g_oper_ie {
+	u8 ch_width;
+	u8 oper_class;
+	u8 primary_ch;
+	u8 oper_ch;
+	__le16 basic_mcs_nss;
+} __packed;
+
+/**
+ * struct ieee80211_aid_response_ie
+ *
+ * AID Response element
+ */
+struct ieee80211_aid_response_ie {
+	__le16 aid;
+	u8 switch_count;
+	__le16 response_int;
+} __packed;
+
+struct ieee80211_s1g_cap {
+	u8 capab_info[10];
+	u8 supp_mcs_nss[5];
+} __packed;
+
+struct ieee80211_ext {
+	__le16 frame_control;
+	__le16 duration;
+	union {
+		struct {
+			u8 sa[ETH_ALEN];
+			__le32 timestamp;
+			u8 change_seq;
+			u8 variable[0];
+		} __packed s1g_beacon;
+	} u;
+} __packed __aligned(2);
+
 struct ieee80211_mgmt {
 	__le16 frame_control;
 	__le16 duration;
@@ -1065,6 +1204,7 @@ struct ieee80211_mgmt {
 /* Supported rates membership selectors */
 #define BSS_MEMBERSHIP_SELECTOR_HT_PHY	127
 #define BSS_MEMBERSHIP_SELECTOR_VHT_PHY	126
+#define BSS_MEMBERSHIP_SELECTOR_HE_PHY	122
 
 /* mgmt header + 1 byte category code */
 #define IEEE80211_MIN_ACTION_SIZE offsetof(struct ieee80211_mgmt, u.action.u)
@@ -1641,7 +1781,7 @@ struct ieee80211_he_operation {
 	__le32 he_oper_params;
 	__le16 he_mcs_nss_set;
 	/* Optional 0,1,3,4,5,7 or 8 bytes: depends on @he_oper_params */
-	u8 optional[0];
+	u8 optional[];
 } __packed;
 
 /**
@@ -1653,7 +1793,7 @@ struct ieee80211_he_operation {
 struct ieee80211_he_spr {
 	u8 he_sr_control;
 	/* Optional 0 to 19 bytes: depends on @he_sr_control */
-	u8 optional[0];
+	u8 optional[];
 } __packed;
 
 /**
@@ -1731,6 +1871,9 @@ struct ieee80211_mu_edca_param_set {
  * @ext_nss_bw_capable: indicates whether or not the local transmitter
  *	(rate scaling algorithm) can deal with the new logic
  *	(dot11VHTExtendedNSSBWCapable)
+ * @max_vht_nss: current maximum NSS as advertised by the STA in
+ *	operating mode notification, can be 0 in which case the
+ *	capability data will be used to derive this (from MCS support)
  *
  * Due to the VHT Extended NSS Bandwidth Support, the maximum NSS can
  * vary for a given BW/MCS. This function parses the data.
@@ -1739,7 +1882,8 @@ struct ieee80211_mu_edca_param_set {
  */
 int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 			      enum ieee80211_vht_chanwidth bw,
-			      int mcs, bool ext_nss_bw_capable);
+			      int mcs, bool ext_nss_bw_capable,
+			      unsigned int max_vht_nss);
 
 /* 802.11ax HE MAC capabilities */
 #define IEEE80211_HE_MAC_CAP0_HTC_HE				0x01
@@ -1814,6 +1958,8 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 #define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED			0x40
 #define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS		0x80
 
+#define IEEE80211_HE_MAC_CAP3_MAX_AMPDU_LEN_EXP_SHIFT		3
+
 #define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG		0x01
 #define IEEE80211_HE_MAC_CAP4_QTP				0x02
 #define IEEE80211_HE_MAC_CAP4_BQR				0x04
@@ -1835,6 +1981,9 @@ int ieee80211_get_vht_max_nss(struct ieee80211_vht_cap *cap,
 #define IEEE80211_HE_MAC_CAP5_PUNCTURED_SOUNDING		0x40
 #define IEEE80211_HE_MAC_CAP5_HT_VHT_TRIG_FRAME_RX		0x80
 
+#define IEEE80211_HE_VHT_MAX_AMPDU_FACTOR	20
+#define IEEE80211_HE_HT_MAX_AMPDU_FACTOR	16
+
 /* 802.11ax HE PHY capabilities */
 #define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G		0x02
 #define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G	0x04
@@ -2060,6 +2209,28 @@ ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info)
 #define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR		0x40000000
 #define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED		0x80000000
 
+/**
+ * ieee80211_he_6ghz_oper - HE 6 GHz operation Information field
+ * @primary: primary channel
+ * @control: control flags
+ * @ccfs0: channel center frequency segment 0
+ * @ccfs1: channel center frequency segment 1
+ * @minrate: minimum rate (in 1 Mbps units)
+ */
+struct ieee80211_he_6ghz_oper {
+	u8 primary;
+#define IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH	0x3
+#define		IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_20MHZ	0
+#define		IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_40MHZ	1
+#define		IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_80MHZ	2
+#define		IEEE80211_HE_6GHZ_OPER_CTRL_CHANWIDTH_160MHZ	3
+#define IEEE80211_HE_6GHZ_OPER_CTRL_DUP_BEACON	0x4
+	u8 control;
+	u8 ccfs0;
+	u8 ccfs1;
+	u8 minrate;
+} __packed;
+
 /*
  * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size
  * @he_oper_ie: byte data of the He Operations IE, stating from the byte
@@ -2086,7 +2257,7 @@ ieee80211_he_oper_size(const u8 *he_oper_ie)
 	if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS)
 		oper_len++;
 	if (he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO)
-		oper_len += 4;
+		oper_len += sizeof(struct ieee80211_he_6ghz_oper);
 
 	/* Add the first byte (extension ID) to the total length */
 	oper_len++;
@@ -2094,6 +2265,34 @@ ieee80211_he_oper_size(const u8 *he_oper_ie)
 	return oper_len;
 }
 
+/**
+ * ieee80211_he_6ghz_oper - obtain 6 GHz operation field
+ * @he_oper: HE operation element (must be pre-validated for size)
+ *	but may be %NULL
+ *
+ * Return: a pointer to the 6 GHz operation field, or %NULL
+ */
+static inline const struct ieee80211_he_6ghz_oper *
+ieee80211_he_6ghz_oper(const struct ieee80211_he_operation *he_oper)
+{
+	const u8 *ret = (void *)&he_oper->optional;
+	u32 he_oper_params;
+
+	if (!he_oper)
+		return NULL;
+
+	he_oper_params = le32_to_cpu(he_oper->he_oper_params);
+
+	if (!(he_oper_params & IEEE80211_HE_OPERATION_6GHZ_OP_INFO))
+		return NULL;
+	if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
+		ret += 3;
+	if (he_oper_params & IEEE80211_HE_OPERATION_CO_HOSTED_BSS)
+		ret++;
+
+	return (void *)ret;
+}
+
 /* HE Spatial Reuse defines */
 #define IEEE80211_HE_SPR_NON_SRG_OFFSET_PRESENT			0x4
 #define IEEE80211_HE_SPR_SRG_INFORMATION_PRESENT		0x8
@@ -2130,6 +2329,86 @@ ieee80211_he_spr_size(const u8 *he_spr_ie)
 	return spr_len;
 }
 
+/* S1G Capabilities Information field */
+#define S1G_CAPAB_B0_S1G_LONG BIT(0)
+#define S1G_CAPAB_B0_SGI_1MHZ BIT(1)
+#define S1G_CAPAB_B0_SGI_2MHZ BIT(2)
+#define S1G_CAPAB_B0_SGI_4MHZ BIT(3)
+#define S1G_CAPAB_B0_SGI_8MHZ BIT(4)
+#define S1G_CAPAB_B0_SGI_16MHZ BIT(5)
+#define S1G_CAPAB_B0_SUPP_CH_WIDTH_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B0_SUPP_CH_WIDTH_SHIFT 6
+
+#define S1G_CAPAB_B1_RX_LDPC BIT(0)
+#define S1G_CAPAB_B1_TX_STBC BIT(1)
+#define S1G_CAPAB_B1_RX_STBC BIT(2)
+#define S1G_CAPAB_B1_SU_BFER BIT(3)
+#define S1G_CAPAB_B1_SU_BFEE BIT(4)
+#define S1G_CAPAB_B1_BFEE_STS_MASK (BIT(5) | BIT(6) | BIT(7))
+#define S1G_CAPAB_B1_BFEE_STS_SHIFT 5
+
+#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_MASK (BIT(0) | BIT(1) | BIT(2))
+#define S1G_CAPAB_B2_SOUNDING_DIMENSIONS_SHIFT 0
+#define S1G_CAPAB_B2_MU_BFER BIT(3)
+#define S1G_CAPAB_B2_MU_BFEE BIT(4)
+#define S1G_CAPAB_B2_PLUS_HTC_VHT BIT(5)
+#define S1G_CAPAB_B2_TRAVELING_PILOT_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B2_TRAVELING_PILOT_SHIFT 6
+
+#define S1G_CAPAB_B3_RD_RESPONDER BIT(0)
+#define S1G_CAPAB_B3_HT_DELAYED_BA BIT(1)
+#define S1G_CAPAB_B3_MAX_MPDU_LEN BIT(2)
+#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_MASK (BIT(3) | BIT(4))
+#define S1G_CAPAB_B3_MAX_AMPDU_LEN_EXP_SHIFT 3
+#define S1G_CAPAB_B3_MIN_MPDU_START_MASK (BIT(5) | BIT(6) | BIT(7))
+#define S1G_CAPAB_B3_MIN_MPDU_START_SHIFT 5
+
+#define S1G_CAPAB_B4_UPLINK_SYNC BIT(0)
+#define S1G_CAPAB_B4_DYNAMIC_AID BIT(1)
+#define S1G_CAPAB_B4_BAT BIT(2)
+#define S1G_CAPAB_B4_TIME_ADE BIT(3)
+#define S1G_CAPAB_B4_NON_TIM BIT(4)
+#define S1G_CAPAB_B4_GROUP_AID BIT(5)
+#define S1G_CAPAB_B4_STA_TYPE_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B4_STA_TYPE_SHIFT 6
+
+#define S1G_CAPAB_B5_CENT_AUTH_CONTROL BIT(0)
+#define S1G_CAPAB_B5_DIST_AUTH_CONTROL BIT(1)
+#define S1G_CAPAB_B5_AMSDU BIT(2)
+#define S1G_CAPAB_B5_AMPDU BIT(3)
+#define S1G_CAPAB_B5_ASYMMETRIC_BA BIT(4)
+#define S1G_CAPAB_B5_FLOW_CONTROL BIT(5)
+#define S1G_CAPAB_B5_SECTORIZED_BEAM_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B5_SECTORIZED_BEAM_SHIFT 6
+
+#define S1G_CAPAB_B6_OBSS_MITIGATION BIT(0)
+#define S1G_CAPAB_B6_FRAGMENT_BA BIT(1)
+#define S1G_CAPAB_B6_NDP_PS_POLL BIT(2)
+#define S1G_CAPAB_B6_RAW_OPERATION BIT(3)
+#define S1G_CAPAB_B6_PAGE_SLICING BIT(4)
+#define S1G_CAPAB_B6_TXOP_SHARING_IMP_ACK BIT(5)
+#define S1G_CAPAB_B6_VHT_LINK_ADAPT_MASK (BIT(6) | BIT(7))
+#define S1G_CAPAB_B6_VHT_LINK_ADAPT_SHIFT 6
+
+#define S1G_CAPAB_B7_TACK_AS_PS_POLL BIT(0)
+#define S1G_CAPAB_B7_DUP_1MHZ BIT(1)
+#define S1G_CAPAB_B7_MCS_NEGOTIATION BIT(2)
+#define S1G_CAPAB_B7_1MHZ_CTL_RESPONSE_PREAMBLE BIT(3)
+#define S1G_CAPAB_B7_NDP_BFING_REPORT_POLL BIT(4)
+#define S1G_CAPAB_B7_UNSOLICITED_DYN_AID BIT(5)
+#define S1G_CAPAB_B7_SECTOR_TRAINING_OPERATION BIT(6)
+#define S1G_CAPAB_B7_TEMP_PS_MODE_SWITCH BIT(7)
+
+#define S1G_CAPAB_B8_TWT_GROUPING BIT(0)
+#define S1G_CAPAB_B8_BDT BIT(1)
+#define S1G_CAPAB_B8_COLOR_MASK (BIT(2) | BIT(3) | BIT(4))
+#define S1G_CAPAB_B8_COLOR_SHIFT 2
+#define S1G_CAPAB_B8_TWT_REQUEST BIT(5)
+#define S1G_CAPAB_B8_TWT_RESPOND BIT(6)
+#define S1G_CAPAB_B8_PV1_FRAME BIT(7)
+
+#define S1G_CAPAB_B9_LINK_ADAPT_PER_CONTROL_RESPONSE BIT(0)
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -2525,8 +2804,14 @@ enum ieee80211_eid {
 	WLAN_EID_QUIET_CHANNEL = 198,
 	WLAN_EID_OPMODE_NOTIF = 199,
 
+	WLAN_EID_REDUCED_NEIGHBOR_REPORT = 201,
+
+	WLAN_EID_S1G_BCN_COMPAT = 213,
+	WLAN_EID_S1G_SHORT_BCN_INTERVAL = 214,
+	WLAN_EID_S1G_CAPABILITIES = 217,
 	WLAN_EID_VENDOR_SPECIFIC = 221,
 	WLAN_EID_QOS_PARAMETER = 222,
+	WLAN_EID_S1G_OPERATION = 232,
 	WLAN_EID_CAG_NUMBER = 237,
 	WLAN_EID_AP_CSN = 239,
 	WLAN_EID_FILS_INDICATION = 240,
@@ -2554,9 +2839,19 @@ enum ieee80211_eid_ext {
 	WLAN_EID_EXT_UORA = 37,
 	WLAN_EID_EXT_HE_MU_EDCA = 38,
 	WLAN_EID_EXT_HE_SPR = 39,
+	WLAN_EID_EXT_NDP_FEEDBACK_REPORT_PARAMSET = 41,
+	WLAN_EID_EXT_BSS_COLOR_CHG_ANN = 42,
+	WLAN_EID_EXT_QUIET_TIME_PERIOD_SETUP = 43,
+	WLAN_EID_EXT_ESS_REPORT = 45,
+	WLAN_EID_EXT_OPS = 46,
+	WLAN_EID_EXT_HE_BSS_LOAD = 47,
 	WLAN_EID_EXT_MAX_CHANNEL_SWITCH_TIME = 52,
 	WLAN_EID_EXT_MULTIPLE_BSSID_CONFIGURATION = 55,
 	WLAN_EID_EXT_NON_INHERITANCE = 56,
+	WLAN_EID_EXT_KNOWN_BSSID = 57,
+	WLAN_EID_EXT_SHORT_SSID_LIST = 58,
+	WLAN_EID_EXT_HE_6GHZ_CAPA = 59,
+	WLAN_EID_EXT_UL_MU_POWER_CAPA = 60,
 };
 
 /* Action category code */
@@ -2787,7 +3082,7 @@ enum ieee80211_tdls_actioncode {
 #define WLAN_EXT_CAPA10_OBSS_NARROW_BW_RU_TOLERANCE_SUPPORT BIT(7)
 
 /* Defines support for enhanced multi-bssid advertisement*/
-#define WLAN_EXT_CAPA11_EMA_SUPPORT	BIT(1)
+#define WLAN_EXT_CAPA11_EMA_SUPPORT	BIT(3)
 
 /* TDLS specific payload type in the LLC/SNAP header */
 #define WLAN_TDLS_SNAP_RFTYPE	0x2
@@ -3099,6 +3394,24 @@ struct ieee80211_tspec_ie {
 	__le16 medium_time;
 } __packed;
 
+struct ieee80211_he_6ghz_capa {
+	/* uses IEEE80211_HE_6GHZ_CAP_* below */
+	__le16 capa;
+} __packed;
+
+/* HE 6 GHz band capabilities */
+/* uses enum ieee80211_min_mpdu_spacing values */
+#define IEEE80211_HE_6GHZ_CAP_MIN_MPDU_START	0x0007
+/* uses enum ieee80211_vht_max_ampdu_length_exp values */
+#define IEEE80211_HE_6GHZ_CAP_MAX_AMPDU_LEN_EXP	0x0038
+/* uses IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_* values */
+#define IEEE80211_HE_6GHZ_CAP_MAX_MPDU_LEN	0x00c0
+/* WLAN_HT_CAP_SM_PS_* values */
+#define IEEE80211_HE_6GHZ_CAP_SM_PS		0x0600
+#define IEEE80211_HE_6GHZ_CAP_RD_RESPONDER	0x0800
+#define IEEE80211_HE_6GHZ_CAP_RX_ANTPAT_CONS	0x1000
+#define IEEE80211_HE_6GHZ_CAP_TX_ANTPAT_CONS	0x2000
+
 /**
  * ieee80211_get_qos_ctl - get pointer to qos control bytes
  * @hdr: the frame
@@ -3323,6 +3636,18 @@ static inline int ieee80211_get_tdls_action(struct sk_buff *skb, u32 hdr_size)
 #define TU_TO_JIFFIES(x)	(usecs_to_jiffies((x) * 1024))
 #define TU_TO_EXP_TIME(x)	(jiffies + TU_TO_JIFFIES(x))
 
+/* convert frequencies */
+#define MHZ_TO_KHZ(freq) ((freq) * 1000)
+#define KHZ_TO_MHZ(freq) ((freq) / 1000)
+#define PR_KHZ(f) KHZ_TO_MHZ(f), f % 1000
+#define KHZ_F "%d.%03d"
+
+/* convert powers */
+#define DBI_TO_MBI(gain) ((gain) * 100)
+#define MBI_TO_DBI(gain) ((gain) / 100)
+#define DBM_TO_MBM(gain) ((gain) * 100)
+#define MBM_TO_DBM(gain) ((gain) / 100)
+
 /**
  * ieee80211_action_contains_tpc - checks if the frame contains TPC element
  * @skb: the skb containing the frame, length will be checked
@@ -3430,4 +3755,30 @@ static inline bool for_each_element_completed(const struct element *element,
 #define WLAN_RSNX_CAPA_PROTECTED_TWT BIT(4)
 #define WLAN_RSNX_CAPA_SAE_H2E BIT(5)
 
+/*
+ * reduced neighbor report, based on Draft P802.11ax_D5.0,
+ * section 9.4.2.170
+ */
+#define IEEE80211_AP_INFO_TBTT_HDR_TYPE				0x03
+#define IEEE80211_AP_INFO_TBTT_HDR_FILTERED			0x04
+#define IEEE80211_AP_INFO_TBTT_HDR_COLOC			0x08
+#define IEEE80211_AP_INFO_TBTT_HDR_COUNT			0xF0
+#define IEEE80211_TBTT_INFO_OFFSET_BSSID_BSS_PARAM		8
+#define IEEE80211_TBTT_INFO_OFFSET_BSSID_SSSID_BSS_PARAM	12
+
+#define IEEE80211_RNR_TBTT_PARAMS_OCT_RECOMMENDED		0x01
+#define IEEE80211_RNR_TBTT_PARAMS_SAME_SSID			0x02
+#define IEEE80211_RNR_TBTT_PARAMS_MULTI_BSSID			0x04
+#define IEEE80211_RNR_TBTT_PARAMS_TRANSMITTED_BSSID		0x08
+#define IEEE80211_RNR_TBTT_PARAMS_COLOC_ESS			0x10
+#define IEEE80211_RNR_TBTT_PARAMS_PROBE_ACTIVE			0x20
+#define IEEE80211_RNR_TBTT_PARAMS_COLOC_AP			0x40
+
+struct ieee80211_neighbor_ap_info {
+       u8 tbtt_info_hdr;
+       u8 tbtt_info_len;
+       u8 op_class;
+       u8 channel;
+} __packed;
+
 #endif /* LINUX_IEEE80211_H */