Merge tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "Changes to existing drivers:
   - fixr platform device collision; da9052, wm8994-core
   - regmap configuration amendments; tps65218
   - fix runtime PM deadlock; rtsx_usb
   - remove unused/superfluous code; db8500-prcmu, omap-usb-host
   - enable watchdog timer; lpc_sch
   - add start/stop RX URBs helpers; dln2
   - remove platform device (DT only); max77686, max77802
   - support suspend and resume; dln2
   - add Device Tree support; da9063
   - extra error checking; intel_soc_pmic
   - const'ify all the things; 88pm860x, hi6421-pmic, intel_soc_pmic,
                               max77686, lm3533, retu, pcf50633,
                               davinci_voicecodec, smsc-ece1099,
                               tps65218, mc13xxx, tps65217, twl-core,
                               twl6040

  New drivers/supported devices:
   - new driver for Richtek RT5033
   - new driver for DA9150 Charger and FuelGauge
   - new driver for Qualcomm Resource Power Manager (RPM)
   - add support for the ir-clk into sun6i-prcm
   - add support for FuelGauge into axp20x"

* tag 'mfd-for-linus-3.20' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (32 commits)
  mfd: intel_soc_pmic: Add missing error check for devm_kzalloc
  mfd: rtsx_usb: Defer autosuspend while card exists
  mfd: devicetree: Add bindings for DA9063
  mfd: da9063: Add device tree support
  regulator: qcom-rpm: Add missing state flag in call to RPM
  mfd: qcom-rpm: Driver for the Qualcomm RPM
  mfd: devicetree: bindings: Add Qualcomm RPM DT binding
  mfd: max77686/802: Remove support for board files
  mfd: omap-usb-host: Remove some unused functions
  mfd: twl6040: Constify struct regmap_config and reg_default array
  mfd: twl-core: Constify struct regmap_config and reg_default array
  mfd: tps65217: Constify struct regmap_config
  mfd: mc13xxx: i2c/spi: Constify struct regmap_config
  mfd: tps65218: Constify struct regmap_config
  mfd: smsc-ece1099: Constify struct regmap_config
  mfd: davinci_voicecodec: Constify struct regmap_config
  mfd: pcf50633: Constify struct regmap_config
  mfd: retu: Constify struct regmap_config
  mfd: lm3533: Constify struct regmap_config
  mfd: max77686: Constify struct regmap_config
  ...

1 files changed, 0 insertions, 28 deletions

diff --git a/include/linux/mfd/max77686.h b/include/linux/mfd/max77686.h
index 553f7d09258a..bb995ab9a575 100644
--- a/include/linux/mfd/max77686.h
+++ b/include/linux/mfd/max77686.h
@@ -119,12 +119,6 @@ enum max77802_regulators {
 	MAX77802_REG_MAX,
 };
 
-struct max77686_regulator_data {
-	int id;
-	struct regulator_init_data *initdata;
-	struct device_node *of_node;
-};
-
 enum max77686_opmode {
 	MAX77686_OPMODE_NORMAL,
 	MAX77686_OPMODE_LP,
@@ -136,26 +130,4 @@ struct max77686_opmode_data {
 	int mode;
 };
 
-struct max77686_platform_data {
-	int ono;
-	int wakeup;
-
-	/* ---- PMIC ---- */
-	struct max77686_regulator_data *regulators;
-	int num_regulators;
-
-	struct max77686_opmode_data *opmode_data;
-
-	/*
-	 * GPIO-DVS feature is not enabled with the current version of
-	 * MAX77686 driver. Buck2/3/4_voltages[0] is used as the default
-	 * voltage at probe. DVS/SELB gpios are set as OUTPUT-LOW.
-	 */
-	int buck234_gpio_dvs[3]; /* GPIO of [0]DVS1, [1]DVS2, [2]DVS3 */
-	int buck234_gpio_selb[3]; /* [0]SELB2, [1]SELB3, [2]SELB4 */
-	unsigned int buck2_voltage[8]; /* buckx_voltage in uV */
-	unsigned int buck3_voltage[8];
-	unsigned int buck4_voltage[8];
-};
-
 #endif /* __LINUX_MFD_MAX77686_H */