diff options
| author |   Enric Balletbo i Serra <enric.balletbo@collabora.com> | 2019-09-02 11:53:05 +0200 |
|---|---|---|
| committer |   Lee Jones <lee.jones@linaro.org> | 2019-09-02 11:33:42 +0100 |
| commit | 840d9f131f65b021e0a73f3371f3194897dba6ad (patch) | |
| tree | 8da2f672f55cb9f894e49b96df5885483a240b71 /include/linux/mfd | |
| parent | mfd / platform: cros_ec: Rename config to a better name (diff) | |
| download | linux-dev-840d9f131f65b021e0a73f3371f3194897dba6ad.tar.xz linux-dev-840d9f131f65b021e0a73f3371f3194897dba6ad.zip | |
mfd / platform: cros_ec: Reorganize platform and mfd includes
There is a bit of mess between cros-ec mfd includes and platform
includes. For example, we have a linux/mfd/cros_ec.h include that
exports the interface implemented in platform/chrome/cros_ec_proto.c. Or
we have a linux/mfd/cros_ec_commands.h file that is non related to the
multifunction device (in the sense that is not exporting any function of
the mfd device). This causes crossed includes between mfd and
platform/chrome subsystems and makes the code difficult to read, apart
from creating 'curious' situations where a platform/chrome driver includes
a linux/mfd/cros_ec.h file just to get the exported functions that are
implemented in another platform/chrome driver.
In order to have a better separation on what the cros-ec multifunction
driver does and what the cros-ec core provides move and rework the
affected includes doing:
- Move cros_ec_commands.h to include/linux/platform_data/cros_ec_commands.h
- Get rid of the parts that are implemented in the platform/chrome/cros_ec_proto.c
driver from include/linux/mfd/cros_ec.h to a new file
include/linux/platform_data/cros_ec_proto.h
- Update all the drivers with the new includes, so
- Drivers that only need to know about the protocol include
- linux/platform_data/cros_ec_proto.h
- linux/platform_data/cros_ec_commands.h
- Drivers that need to know about the cros-ec mfd device also include
- linux/mfd/cros_ec.h
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
Acked-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mark Brown <broonie@kernel.org>
Acked-by: Wolfram Sang <wsa@the-dreams.de>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Acked-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Acked-by: Chanwoo Choi <cw00.choi@samsung.com>
Reviewed-by: Gwendal Grignou <gwendal@chromium.org>
Tested-by: Gwendal Grignou <gwendal@chromium.org>
Series changes: 3
- Fix dereferencing pointer to incomplete type 'struct cros_ec_dev' (lkp)
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Diffstat (limited to 'include/linux/mfd')
| -rw-r--r-- | include/linux/mfd/cros_ec.h | 308 | ||||
| -rw-r--r-- | include/linux/mfd/cros_ec_commands.h | 5713 |
2 files changed, 0 insertions, 6021 deletions
diff --git a/include/linux/mfd/cros_ec.h b/include/linux/mfd/cros_ec.h index 569428ad1cb1..61c2875c2a40 100644 --- a/include/linux/mfd/cros_ec.h +++ b/include/linux/mfd/cros_ec.h @@ -8,186 +8,7 @@ #ifndef __LINUX_MFD_CROS_EC_H #define __LINUX_MFD_CROS_EC_H -#include <linux/cdev.h> #include <linux/device.h> -#include <linux/notifier.h> -#include <linux/mfd/cros_ec_commands.h> -#include <linux/mutex.h> - -#define CROS_EC_DEV_NAME "cros_ec" -#define CROS_EC_DEV_FP_NAME "cros_fp" -#define CROS_EC_DEV_PD_NAME "cros_pd" -#define CROS_EC_DEV_TP_NAME "cros_tp" -#define CROS_EC_DEV_ISH_NAME "cros_ish" -#define CROS_EC_DEV_SCP_NAME "cros_scp" - -/* - * The EC is unresponsive for a time after a reboot command. Add a - * simple delay to make sure that the bus stays locked. - */ -#define EC_REBOOT_DELAY_MS 50 - -/* - * Max bus-specific overhead incurred by request/responses. - * I2C requires 1 additional byte for requests. - * I2C requires 2 additional bytes for responses. - * SPI requires up to 32 additional bytes for responses. - */ -#define EC_PROTO_VERSION_UNKNOWN 0 -#define EC_MAX_REQUEST_OVERHEAD 1 -#define EC_MAX_RESPONSE_OVERHEAD 32 - -/* - * Command interface between EC and AP, for LPC, I2C and SPI interfaces. - */ -enum { - EC_MSG_TX_HEADER_BYTES = 3, - EC_MSG_TX_TRAILER_BYTES = 1, - EC_MSG_TX_PROTO_BYTES = EC_MSG_TX_HEADER_BYTES + - EC_MSG_TX_TRAILER_BYTES, - EC_MSG_RX_PROTO_BYTES = 3, - - /* Max length of messages for proto 2*/ - EC_PROTO2_MSG_BYTES = EC_PROTO2_MAX_PARAM_SIZE + - EC_MSG_TX_PROTO_BYTES, - - EC_MAX_MSG_BYTES = 64 * 1024, -}; - -/** - * struct cros_ec_command - Information about a ChromeOS EC command. - * @version: Command version number (often 0). - * @command: Command to send (EC_CMD_...). - * @outsize: Outgoing length in bytes. - * @insize: Max number of bytes to accept from the EC. - * @result: EC's response to the command (separate from communication failure). - * @data: Where to put the incoming data from EC and outgoing data to EC. - */ -struct cros_ec_command { - uint32_t version; - uint32_t command; - uint32_t outsize; - uint32_t insize; - uint32_t result; - uint8_t data[0]; -}; - -/** - * struct cros_ec_device - Information about a ChromeOS EC device. - * @phys_name: Name of physical comms layer (e.g. 'i2c-4'). - * @dev: Device pointer for physical comms device - * @was_wake_device: True if this device was set to wake the system from - * sleep at the last suspend. - * @cros_class: The class structure for this device. - * @cmd_readmem: Direct read of the EC memory-mapped region, if supported. - * @offset: Is within EC_LPC_ADDR_MEMMAP region. - * @bytes: Number of bytes to read. zero means "read a string" (including - * the trailing '\0'). At most only EC_MEMMAP_SIZE bytes can be - * read. Caller must ensure that the buffer is large enough for the - * result when reading a string. - * @max_request: Max size of message requested. - * @max_response: Max size of message response. - * @max_passthru: Max sice of passthru message. - * @proto_version: The protocol version used for this device. - * @priv: Private data. - * @irq: Interrupt to use. - * @id: Device id. - * @din: Input buffer (for data from EC). This buffer will always be - * dword-aligned and include enough space for up to 7 word-alignment - * bytes also, so we can ensure that the body of the message is always - * dword-aligned (64-bit). We use this alignment to keep ARM and x86 - * happy. Probably word alignment would be OK, there might be a small - * performance advantage to using dword. - * @dout: Output buffer (for data to EC). This buffer will always be - * dword-aligned and include enough space for up to 7 word-alignment - * bytes also, so we can ensure that the body of the message is always - * dword-aligned (64-bit). We use this alignment to keep ARM and x86 - * happy. Probably word alignment would be OK, there might be a small - * performance advantage to using dword. - * @din_size: Size of din buffer to allocate (zero to use static din). - * @dout_size: Size of dout buffer to allocate (zero to use static dout). - * @wake_enabled: True if this device can wake the system from sleep. - * @suspended: True if this device had been suspended. - * @cmd_xfer: Send command to EC and get response. - * Returns the number of bytes received if the communication - * succeeded, but that doesn't mean the EC was happy with the - * command. The caller should check msg.result for the EC's result - * code. - * @pkt_xfer: Send packet to EC and get response. - * @lock: One transaction at a time. - * @mkbp_event_supported: True if this EC supports the MKBP event protocol. - * @host_sleep_v1: True if this EC supports the sleep v1 command. - * @event_notifier: Interrupt event notifier for transport devices. - * @event_data: Raw payload transferred with the MKBP event. - * @event_size: Size in bytes of the event data. - * @host_event_wake_mask: Mask of host events that cause wake from suspend. - * @ec: The platform_device used by the mfd driver to interface with the - * main EC. - * @pd: The platform_device used by the mfd driver to interface with the - * PD behind an EC. - */ -struct cros_ec_device { - /* These are used by other drivers that want to talk to the EC */ - const char *phys_name; - struct device *dev; - bool was_wake_device; - struct class *cros_class; - int (*cmd_readmem)(struct cros_ec_device *ec, unsigned int offset, - unsigned int bytes, void *dest); - - /* These are used to implement the platform-specific interface */ - u16 max_request; - u16 max_response; - u16 max_passthru; - u16 proto_version; - void *priv; - int irq; - u8 *din; - u8 *dout; - int din_size; - int dout_size; - bool wake_enabled; - bool suspended; - int (*cmd_xfer)(struct cros_ec_device *ec, - struct cros_ec_command *msg); - int (*pkt_xfer)(struct cros_ec_device *ec, - struct cros_ec_command *msg); - struct mutex lock; - bool mkbp_event_supported; - bool host_sleep_v1; - struct blocking_notifier_head event_notifier; - - struct ec_response_get_next_event_v1 event_data; - int event_size; - u32 host_event_wake_mask; - u32 last_resume_result; - - /* The platform devices used by the mfd driver */ - struct platform_device *ec; - struct platform_device *pd; -}; - -/** - * struct cros_ec_sensor_platform - ChromeOS EC sensor platform information. - * @sensor_num: Id of the sensor, as reported by the EC. - */ -struct cros_ec_sensor_platform { - u8 sensor_num; -}; - -/** - * struct cros_ec_platform - ChromeOS EC platform information. - * @ec_name: Name of EC device (e.g. 'cros-ec', 'cros-pd', ...) - * used in /dev/ and sysfs. - * @cmd_offset: Offset to apply for each command. Set when - * registering a device behind another one. - */ -struct cros_ec_platform { - const char *ec_name; - u16 cmd_offset; -}; - -struct cros_ec_debugfs; /** * struct cros_ec_dev - ChromeOS EC device entry point. @@ -211,133 +32,4 @@ struct cros_ec_dev { #define to_cros_ec_dev(dev) container_of(dev, struct cros_ec_dev, class_dev) -/** - * cros_ec_suspend() - Handle a suspend operation for the ChromeOS EC device. - * @ec_dev: Device to suspend. - * - * This can be called by drivers to handle a suspend event. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_suspend(struct cros_ec_device *ec_dev); - -/** - * cros_ec_resume() - Handle a resume operation for the ChromeOS EC device. - * @ec_dev: Device to resume. - * - * This can be called by drivers to handle a resume event. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_resume(struct cros_ec_device *ec_dev); - -/** - * cros_ec_prepare_tx() - Prepare an outgoing message in the output buffer. - * @ec_dev: Device to register. - * @msg: Message to write. - * - * This is intended to be used by all ChromeOS EC drivers, but at present - * only SPI uses it. Once LPC uses the same protocol it can start using it. - * I2C could use it now, with a refactor of the existing code. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_prepare_tx(struct cros_ec_device *ec_dev, - struct cros_ec_command *msg); - -/** - * cros_ec_check_result() - Check ec_msg->result. - * @ec_dev: EC device. - * @msg: Message to check. - * - * This is used by ChromeOS EC drivers to check the ec_msg->result for - * errors and to warn about them. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_check_result(struct cros_ec_device *ec_dev, - struct cros_ec_command *msg); - -/** - * cros_ec_cmd_xfer() - Send a command to the ChromeOS EC. - * @ec_dev: EC device. - * @msg: Message to write. - * - * Call this to send a command to the ChromeOS EC. This should be used - * instead of calling the EC's cmd_xfer() callback directly. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev, - struct cros_ec_command *msg); - -/** - * cros_ec_cmd_xfer_status() - Send a command to the ChromeOS EC. - * @ec_dev: EC device. - * @msg: Message to write. - * - * This function is identical to cros_ec_cmd_xfer, except it returns success - * status only if both the command was transmitted successfully and the EC - * replied with success status. It's not necessary to check msg->result when - * using this function. - * - * Return: The number of bytes transferred on success or negative error code. - */ -int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev, - struct cros_ec_command *msg); - -/** - * cros_ec_register() - Register a new ChromeOS EC, using the provided info. - * @ec_dev: Device to register. - * - * Before calling this, allocate a pointer to a new device and then fill - * in all the fields up to the --private-- marker. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_register(struct cros_ec_device *ec_dev); - -/** - * cros_ec_unregister() - Remove a ChromeOS EC. - * @ec_dev: Device to unregister. - * - * Call this to deregister a ChromeOS EC, then clean up any private data. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_unregister(struct cros_ec_device *ec_dev); - -/** - * cros_ec_query_all() - Query the protocol version supported by the - * ChromeOS EC. - * @ec_dev: Device to register. - * - * Return: 0 on success or negative error code. - */ -int cros_ec_query_all(struct cros_ec_device *ec_dev); - -/** - * cros_ec_get_next_event() - Fetch next event from the ChromeOS EC. - * @ec_dev: Device to fetch event from. - * @wake_event: Pointer to a bool set to true upon return if the event might be - * treated as a wake event. Ignored if null. - * - * Return: negative error code on errors; 0 for no data; or else number of - * bytes received (i.e., an event was retrieved successfully). Event types are - * written out to @ec_dev->event_data.event_type on success. - */ -int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event); - -/** - * cros_ec_get_host_event() - Return a mask of event set by the ChromeOS EC. - * @ec_dev: Device to fetch event from. - * - * When MKBP is supported, when the EC raises an interrupt, we collect the - * events raised and call the functions in the ec notifier. This function - * is a helper to know which events are raised. - * - * Return: 0 on error or non-zero bitmask of one or more EC_HOST_EVENT_*. - */ -u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev); - #endif /* __LINUX_MFD_CROS_EC_H */ diff --git a/include/linux/mfd/cros_ec_commands.h b/include/linux/mfd/cros_ec_commands.h deleted file mode 100644 index 7ccb8757b79d..000000000000 --- a/include/linux/mfd/cros_ec_commands.h +++ /dev/null @@ -1,5713 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Host communication command constants for ChromeOS EC - * - * Copyright (C) 2012 Google, Inc - * - * NOTE: This file is auto-generated from ChromeOS EC Open Source code from - * https://chromium.googlesource.com/chromiumos/platform/ec/+/master/include/ec_commands.h - */ - -/* Host communication command constants for Chrome EC */ - -#ifndef __CROS_EC_COMMANDS_H -#define __CROS_EC_COMMANDS_H - - - - -#define BUILD_ASSERT(_cond) - -/* - * Current version of this protocol - * - * TODO(crosbug.com/p/11223): This is effectively useless; protocol is - * determined in other ways. Remove this once the kernel code no longer - * depends on it. - */ -#define EC_PROTO_VERSION 0x00000002 - -/* Command version mask */ -#define EC_VER_MASK(version) BIT(version) - -/* I/O addresses for ACPI commands */ -#define EC_LPC_ADDR_ACPI_DATA 0x62 -#define EC_LPC_ADDR_ACPI_CMD 0x66 - -/* I/O addresses for host command */ -#define EC_LPC_ADDR_HOST_DATA 0x200 -#define EC_LPC_ADDR_HOST_CMD 0x204 - -/* I/O addresses for host command args and params */ -/* Protocol version 2 */ -#define EC_LPC_ADDR_HOST_ARGS 0x800 /* And 0x801, 0x802, 0x803 */ -#define EC_LPC_ADDR_HOST_PARAM 0x804 /* For version 2 params; size is - * EC_PROTO2_MAX_PARAM_SIZE - */ -/* Protocol version 3 */ -#define EC_LPC_ADDR_HOST_PACKET 0x800 /* Offset of version 3 packet */ -#define EC_LPC_HOST_PACKET_SIZE 0x100 /* Max size of version 3 packet */ - -/* - * The actual block is 0x800-0x8ff, but some BIOSes think it's 0x880-0x8ff - * and they tell the kernel that so we have to think of it as two parts. - */ -#define EC_HOST_CMD_REGION0 0x800 -#define EC_HOST_CMD_REGION1 0x880 -#define EC_HOST_CMD_REGION_SIZE 0x80 - -/* EC command register bit functions */ -#define EC_LPC_CMDR_DATA BIT(0) /* Data ready for host to read */ -#define EC_LPC_CMDR_PENDING BIT(1) /* Write pending to EC */ -#define EC_LPC_CMDR_BUSY BIT(2) /* EC is busy processing a command */ -#define EC_LPC_CMDR_CMD BIT(3) /* Last host write was a command */ -#define EC_LPC_CMDR_ACPI_BRST BIT(4) /* Burst mode (not used) */ -#define EC_LPC_CMDR_SCI BIT(5) /* SCI event is pending */ -#define EC_LPC_CMDR_SMI BIT(6) /* SMI event is pending */ - -#define EC_LPC_ADDR_MEMMAP 0x900 -#define EC_MEMMAP_SIZE 255 /* ACPI IO buffer max is 255 bytes */ -#define EC_MEMMAP_TEXT_MAX 8 /* Size of a string in the memory map */ - -/* The offset address of each type of data in mapped memory. */ -#define EC_MEMMAP_TEMP_SENSOR 0x00 /* Temp sensors 0x00 - 0x0f */ -#define EC_MEMMAP_FAN 0x10 /* Fan speeds 0x10 - 0x17 */ -#define EC_MEMMAP_TEMP_SENSOR_B 0x18 /* More temp sensors 0x18 - 0x1f */ -#define EC_MEMMAP_ID 0x20 /* 0x20 == 'E', 0x21 == 'C' */ -#define EC_MEMMAP_ID_VERSION 0x22 /* Version of data in 0x20 - 0x2f */ -#define EC_MEMMAP_THERMAL_VERSION 0x23 /* Version of data in 0x00 - 0x1f */ -#define EC_MEMMAP_BATTERY_VERSION 0x24 /* Version of data in 0x40 - 0x7f */ -#define EC_MEMMAP_SWITCHES_VERSION 0x25 /* Version of data in 0x30 - 0x33 */ -#define EC_MEMMAP_EVENTS_VERSION 0x26 /* Version of data in 0x34 - 0x3f */ -#define EC_MEMMAP_HOST_CMD_FLAGS 0x27 /* Host cmd interface flags (8 bits) */ -/* Unused 0x28 - 0x2f */ -#define EC_MEMMAP_SWITCHES 0x30 /* 8 bits */ -/* Unused 0x31 - 0x33 */ -#define EC_MEMMAP_HOST_EVENTS 0x34 /* 64 bits */ -/* Battery values are all 32 bits, unless otherwise noted. */ -#define EC_MEMMAP_BATT_VOLT 0x40 /* Battery Present Voltage */ -#define EC_MEMMAP_BATT_RATE 0x44 /* Battery Present Rate */ -#define EC_MEMMAP_BATT_CAP 0x48 /* Battery Remaining Capacity */ -#define EC_MEMMAP_BATT_FLAG 0x4c /* Battery State, see below (8-bit) */ -#define EC_MEMMAP_BATT_COUNT 0x4d /* Battery Count (8-bit) */ -#define EC_MEMMAP_BATT_INDEX 0x4e /* Current Battery Data Index (8-bit) */ -/* Unused 0x4f */ -#define EC_MEMMAP_BATT_DCAP 0x50 /* Battery Design Capacity */ -#define EC_MEMMAP_BATT_DVLT 0x54 /* Battery Design Voltage */ -#define EC_MEMMAP_BATT_LFCC 0x58 /* Battery Last Full Charge Capacity */ -#define EC_MEMMAP_BATT_CCNT 0x5c /* Battery Cycle Count */ -/* Strings are all 8 bytes (EC_MEMMAP_TEXT_MAX) */ -#define EC_MEMMAP_BATT_MFGR 0x60 /* Battery Manufacturer String */ -#define EC_MEMMAP_BATT_MODEL 0x68 /* Battery Model Number String */ -#define EC_MEMMAP_BATT_SERIAL 0x70 /* Battery Serial Number String */ -#define EC_MEMMAP_BATT_TYPE 0x78 /* Battery Type String */ -#define EC_MEMMAP_ALS 0x80 /* ALS readings in lux (2 X 16 bits) */ -/* Unused 0x84 - 0x8f */ -#define EC_MEMMAP_ACC_STATUS 0x90 /* Accelerometer status (8 bits )*/ -/* Unused 0x91 */ -#define EC_MEMMAP_ACC_DATA 0x92 /* Accelerometers data 0x92 - 0x9f */ -/* 0x92: Lid Angle if available, LID_ANGLE_UNRELIABLE otherwise */ -/* 0x94 - 0x99: 1st Accelerometer */ -/* 0x9a - 0x9f: 2nd Accelerometer */ -#define EC_MEMMAP_GYRO_DATA 0xa0 /* Gyroscope data 0xa0 - 0xa5 */ -/* Unused 0xa6 - 0xdf */ - -/* - * ACPI is unable to access memory mapped data at or above this offset due to - * limitations of the ACPI protocol. Do not place data in the range 0xe0 - 0xfe - * which might be needed by ACPI. - */ -#define EC_MEMMAP_NO_ACPI 0xe0 - -/* Define the format of the accelerometer mapped memory status byte. */ -#define EC_MEMMAP_ACC_STATUS_SAMPLE_ID_MASK 0x0f -#define EC_MEMMAP_ACC_STATUS_BUSY_BIT BIT(4) -#define EC_MEMMAP_ACC_STATUS_PRESENCE_BIT BIT(7) - -/* Number of temp sensors at EC_MEMMAP_TEMP_SENSOR */ -#define EC_TEMP_SENSOR_ENTRIES 16 -/* - * Number of temp sensors at EC_MEMMAP_TEMP_SENSOR_B. - * - * Valid only if EC_MEMMAP_THERMAL_VERSION returns >= 2. - */ -#define EC_TEMP_SENSOR_B_ENTRIES 8 - -/* Special values for mapped temperature sensors */ -#define EC_TEMP_SENSOR_NOT_PRESENT 0xff -#define EC_TEMP_SENSOR_ERROR 0xfe -#define EC_TEMP_SENSOR_NOT_POWERED 0xfd -#define EC_TEMP_SENSOR_NOT_CALIBRATED 0xfc -/* - * The offset of temperature value stored in mapped memory. This allows - * reporting a temperature range of 200K to 454K = -73C to 181C. - */ -#define EC_TEMP_SENSOR_OFFSET 200 - -/* - * Number of ALS readings at EC_MEMMAP_ALS - */ -#define EC_ALS_ENTRIES 2 - -/* - * The default value a temperature sensor will return when it is present but - * has not been read this boot. This is a reasonable number to avoid - * triggering alarms on the host. - */ -#define EC_TEMP_SENSOR_DEFAULT (296 - EC_TEMP_SENSOR_OFFSET) - -#define EC_FAN_SPEED_ENTRIES 4 /* Number of fans at EC_MEMMAP_FAN */ -#define EC_FAN_SPEED_NOT_PRESENT 0xffff /* Entry not present */ -#define EC_FAN_SPEED_STALLED 0xfffe /* Fan stalled */ - -/* Battery bit flags at EC_MEMMAP_BATT_FLAG. */ -#define EC_BATT_FLAG_AC_PRESENT 0x01 -#define EC_BATT_FLAG_BATT_PRESENT 0x02 -#define EC_BATT_FLAG_DISCHARGING 0x04 -#define EC_BATT_FLAG_CHARGING 0x08 -#define EC_BATT_FLAG_LEVEL_CRITICAL 0x10 -/* Set if some of the static/dynamic data is invalid (or outdated). */ -#define EC_BATT_FLAG_INVALID_DATA 0x20 - -/* Switch flags at EC_MEMMAP_SWITCHES */ -#define EC_SWITCH_LID_OPEN 0x01 -#define EC_SWITCH_POWER_BUTTON_PRESSED 0x02 -#define EC_SWITCH_WRITE_PROTECT_DISABLED 0x04 -/* Was recovery requested via keyboard; now unused. */ -#define EC_SWITCH_IGNORE1 0x08 -/* Recovery requested via dedicated signal (from servo board) */ -#define EC_SWITCH_DEDICATED_RECOVERY 0x10 -/* Was fake developer mode switch; now unused. Remove in next refactor. */ -#define EC_SWITCH_IGNORE0 0x20 - -/* Host command interface flags */ -/* Host command interface supports LPC args (LPC interface only) */ -#define EC_HOST_CMD_FLAG_LPC_ARGS_SUPPORTED 0x01 -/* Host command interface supports version 3 protocol */ -#define EC_HOST_CMD_FLAG_VERSION_3 0x02 - -/* Wireless switch flags */ -#define EC_WIRELESS_SWITCH_ALL ~0x00 /* All flags */ -#define EC_WIRELESS_SWITCH_WLAN 0x01 /* WLAN radio */ -#define EC_WIRELESS_SWITCH_BLUETOOTH 0x02 /* Bluetooth radio */ -#define EC_WIRELESS_SWITCH_WWAN 0x04 /* WWAN power */ -#define EC_WIRELESS_SWITCH_WLAN_POWER 0x08 /* WLAN power */ - -/*****************************************************************************/ -/* - * ACPI commands - * - * These are valid ONLY on the ACPI command/data port. - */ - -/* - * ACPI Read Embedded Controller - * - * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). - * - * Use the following sequence: - * - * - Write EC_CMD_ACPI_READ to EC_LPC_ADDR_ACPI_CMD - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write address to EC_LPC_ADDR_ACPI_DATA - * - Wait for EC_LPC_CMDR_DATA bit to set - * - Read value from EC_LPC_ADDR_ACPI_DATA - */ -#define EC_CMD_ACPI_READ 0x0080 - -/* - * ACPI Write Embedded Controller - * - * This reads from ACPI memory space on the EC (EC_ACPI_MEM_*). - * - * Use the following sequence: - * - * - Write EC_CMD_ACPI_WRITE to EC_LPC_ADDR_ACPI_CMD - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write address to EC_LPC_ADDR_ACPI_DATA - * - Wait for EC_LPC_CMDR_PENDING bit to clear - * - Write value to EC_LPC_ADDR_ACPI_DATA - */ -#define EC_CMD_ACPI_WRITE 0x0081 - -/* - * ACPI Burst Enable Embedded Controller - * - * This enables burst mode on the EC to allow the host to issue several - * commands back-to-back. While in this mode, writes to mapped multi-byte - * data are locked out to ensure data consistency. - */ -#define EC_CMD_ACPI_BURST_ENABLE 0x0082 - -/* - * ACPI Burst Disable Embedded Controller - * - * This disables burst mode on the EC and stops preventing EC writes to mapped - * multi-byte data. - */ -#define EC_CMD_ACPI_BURST_DISABLE 0x0083 - -/* - * ACPI Query Embedded Controller - * - * This clears the lowest-order bit in the currently pending host events, and - * sets the result code to the 1-based index of the bit (event 0x00000001 = 1, - * event 0x80000000 = 32), or 0 if no event was pending. - */ -#define EC_CMD_ACPI_QUERY_EVENT 0x0084 - -/* Valid addresses in ACPI memory space, for read/write commands */ - -/* Memory space version; set to EC_ACPI_MEM_VERSION_CURRENT */ -#define EC_ACPI_MEM_VERSION 0x00 -/* - * Test location; writing value here updates test compliment byte to (0xff - - * value). - */ -#define EC_ACPI_MEM_TEST 0x01 -/* Test compliment; writes here are ignored. */ -#define EC_ACPI_MEM_TEST_COMPLIMENT 0x02 - -/* Keyboard backlight brightness percent (0 - 100) */ -#define EC_ACPI_MEM_KEYBOARD_BACKLIGHT 0x03 -/* DPTF Target Fan Duty (0-100, 0xff for auto/none) */ -#define EC_ACPI_MEM_FAN_DUTY 0x04 - -/* - * DPTF temp thresholds. Any of the EC's temp sensors can have up to two - * independent thresholds attached to them. The current value of the ID - * register determines which sensor is affected by the THRESHOLD and COMMIT - * registers. The THRESHOLD register uses the same EC_TEMP_SENSOR_OFFSET scheme - * as the memory-mapped sensors. The COMMIT register applies those settings. - * - * The spec does not mandate any way to read back the threshold settings - * themselves, but when a threshold is crossed the AP needs a way to determine - * which sensor(s) are responsible. Each reading of the ID register clears and - * returns one sensor ID that has crossed one of its threshold (in either - * direction) since the last read. A value of 0xFF means "no new thresholds - * have tripped". Setting or enabling the thresholds for a sensor will clear - * the unread event count for that sensor. - */ -#define EC_ACPI_MEM_TEMP_ID 0x05 -#define EC_ACPI_MEM_TEMP_THRESHOLD 0x06 -#define EC_ACPI_MEM_TEMP_COMMIT 0x07 -/* - * Here are the bits for the COMMIT register: - * bit 0 selects the threshold index for the chosen sensor (0/1) - * bit 1 enables/disables the selected threshold (0 = off, 1 = on) - * Each write to the commit register affects one threshold. - */ -#define EC_ACPI_MEM_TEMP_COMMIT_SELECT_MASK BIT(0) -#define EC_ACPI_MEM_TEMP_COMMIT_ENABLE_MASK BIT(1) -/* - * Example: - * - * Set the thresholds for sensor 2 to 50 C and 60 C: - * write 2 to [0x05] -- select temp sensor 2 - * write 0x7b to [0x06] -- C_TO_K(50) - EC_TEMP_SENSOR_OFFSET - * write 0x2 to [0x07] -- enable threshold 0 with this value - * write 0x85 to [0x06] -- C_TO_K(60) - EC_TEMP_SENSOR_OFFSET - * write 0x3 to [0x07] -- enable threshold 1 with this value - * - * Disable the 60 C threshold, leaving the 50 C threshold unchanged: - * write 2 to [0x05] -- select temp sensor 2 - * write 0x1 to [0x07] -- disable threshold 1 - */ - -/* DPTF battery charging current limit */ -#define EC_ACPI_MEM_CHARGING_LIMIT 0x08 - -/* Charging limit is specified in 64 mA steps */ -#define EC_ACPI_MEM_CHARGING_LIMIT_STEP_MA 64 -/* Value to disable DPTF battery charging limit */ -#define EC_ACPI_MEM_CHARGING_LIMIT_DISABLED 0xff - -/* - * Report device orientation - * Bits Definition - * 3:1 Device DPTF Profile Number (DDPN) - * 0 = Reserved for backward compatibility (indicates no valid - * profile number. Host should fall back to using TBMD). - * 1..7 = DPTF Profile number to indicate to host which table needs - * to be loaded. - * 0 Tablet Mode Device Indicator (TBMD) - */ -#define EC_ACPI_MEM_DEVICE_ORIENTATION 0x09 -#define EC_ACPI_MEM_TBMD_SHIFT 0 -#define EC_ACPI_MEM_TBMD_MASK 0x1 -#define EC_ACPI_MEM_DDPN_SHIFT 1 -#define EC_ACPI_MEM_DDPN_MASK 0x7 - -/* - * Report device features. Uses the same format as the host command, except: - * - * bit 0 (EC_FEATURE_LIMITED) changes meaning from "EC code has a limited set - * of features", which is of limited interest when the system is already - * interpreting ACPI bytecode, to "EC_FEATURES[0-7] is not supported". Since - * these are supported, it defaults to 0. - * This allows detecting the presence of this field since older versions of - * the EC codebase would simply return 0xff to that unknown address. Check - * FEATURES0 != 0xff (or FEATURES0[0] == 0) to make sure that the other bits - * are valid. - */ -#define EC_ACPI_MEM_DEVICE_FEATURES0 0x0a -#define EC_ACPI_MEM_DEVICE_FEATURES1 0x0b -#define EC_ACPI_MEM_DEVICE_FEATURES2 0x0c -#define EC_ACPI_MEM_DEVICE_FEATURES3 0x0d -#define EC_ACPI_MEM_DEVICE_FEATURES4 0x0e -#define EC_ACPI_MEM_DEVICE_FEATURES5 0x0f -#define EC_ACPI_MEM_DEVICE_FEATURES6 0x10 -#define EC_ACPI_MEM_DEVICE_FEATURES7 0x11 - -#define EC_ACPI_MEM_BATTERY_INDEX 0x12 - -/* - * USB Port Power. Each bit indicates whether the corresponding USB ports' power - * is enabled (1) or disabled (0). - * bit 0 USB port ID 0 - * ... - * bit 7 USB port ID 7 - */ -#define EC_ACPI_MEM_USB_PORT_POWER 0x13 - -/* - * ACPI addresses 0x20 - 0xff map to EC_MEMMAP offset 0x00 - 0xdf. This data - * is read-only from the AP. Added in EC_ACPI_MEM_VERSION 2. - */ -#define EC_ACPI_MEM_MAPPED_BEGIN 0x20 -#define EC_ACPI_MEM_MAPPED_SIZE 0xe0 - -/* Current version of ACPI memory address space */ -#define EC_ACPI_MEM_VERSION_CURRENT 2 - - -/* - * This header file is used in coreboot both in C and ACPI code. The ACPI code - * is pre-processed to handle constants but the ASL compiler is unable to - * handle actual C code so keep it separate. - */ - - -/* - * Attributes for EC request and response packets. Just defining __packed - * results in inefficient assembly code on ARM, if the structure is actually - * 32-bit aligned, as it should be for all buffers. - * - * Be very careful when adding these to existing structures. They will round - * up the structure size to the specified boundary. - * - * Also be very careful to make that if a structure is included in some other - * parent structure that the alignment will still be true given the packing of - * the parent structure. This is particularly important if the sub-structure - * will be passed as a pointer to another function, since that function will - * not know about the misaligment caused by the parent structure's packing. - * - * Also be very careful using __packed - particularly when nesting non-packed - * structures inside packed ones. In fact, DO NOT use __packed directly; - * always use one of these attributes. - * - * Once everything is annotated properly, the following search strings should - * not return ANY matches in this file other than right here: - * - * "__packed" - generates inefficient code; all sub-structs must also be packed - * - * "struct [^_]" - all structs should be annotated, except for structs that are - * members of other structs/unions (and their original declarations should be - * annotated). - */ - -/* - * Packed structures make no assumption about alignment, so they do inefficient - * byte-wise reads. - */ -#define __ec_align1 __packed -#define __ec_align2 __packed -#define __ec_align4 __packed -#define __ec_align_size1 __packed -#define __ec_align_offset1 __packed -#define __ec_align_offset2 __packed -#define __ec_todo_packed __packed -#define __ec_todo_unpacked - - -/* LPC command status byte masks */ -/* EC has written a byte in the data register and host hasn't read it yet */ -#define EC_LPC_STATUS_TO_HOST 0x01 -/* Host has written a command/data byte and the EC hasn't read it yet */ -#define EC_LPC_STATUS_FROM_HOST 0x02 -/* EC is processing a command */ -#define EC_LPC_STATUS_PROCESSING 0x04 -/* Last write to EC was a command, not data */ -#define EC_LPC_STATUS_LAST_CMD 0x08 -/* EC is in burst mode */ -#define EC_LPC_STATUS_BURST_MODE 0x10 -/* SCI event is pending (requesting SCI query) */ -#define EC_LPC_STATUS_SCI_PENDING 0x20 -/* SMI event is pending (requesting SMI query) */ -#define EC_LPC_STATUS_SMI_PENDING 0x40 -/* (reserved) */ -#define EC_LPC_STATUS_RESERVED 0x80 - -/* - * EC is busy. This covers both the EC processing a command, and the host has - * written a new command but the EC hasn't picked it up yet. - */ -#define EC_LPC_STATUS_BUSY_MASK \ - (EC_LPC_STATUS_FROM_HOST | EC_LPC_STATUS_PROCESSING) - -/* - * Host command response codes (16-bit). Note that response codes should be - * stored in a uint16_t rather than directly in a value of this type. - */ -enum ec_status { - EC_RES_SUCCESS = 0, - EC_RES_INVALID_COMMAND = 1, - EC_RES_ERROR = 2, - EC_RES_INVALID_PARAM = 3, - EC_RES_ACCESS_DENIED = 4, - EC_RES_INVALID_RESPONSE = 5, - EC_RES_INVALID_VERSION = 6, - EC_RES_INVALID_CHECKSUM = 7, - EC_RES_IN_PROGRESS = 8, /* Accepted, command in progress */ - EC_RES_UNAVAILABLE = 9, /* No response available */ - EC_RES_TIMEOUT = 10, /* We got a timeout */ - EC_RES_OVERFLOW = 11, /* Table / data overflow */ - EC_RES_INVALID_HEADER = 12, /* Header contains invalid data */ - EC_RES_REQUEST_TRUNCATED = 13, /* Didn't get the entire request */ - EC_RES_RESPONSE_TOO_BIG = 14, /* Response was too big to handle */ - EC_RES_BUS_ERROR = 15, /* Communications bus error */ - EC_RES_BUSY = 16, /* Up but too busy. Should retry */ - EC_RES_INVALID_HEADER_VERSION = 17, /* Header version invalid */ - EC_RES_INVALID_HEADER_CRC = 18, /* Header CRC invalid */ - EC_RES_INVALID_DATA_CRC = 19, /* Data CRC invalid */ - EC_RES_DUP_UNAVAILABLE = 20, /* Can't resend response */ -}; - -/* - * Host event codes. Note these are 1-based, not 0-based, because ACPI query - * EC command uses code 0 to mean "no event pending". We explicitly specify - * each value in the enum listing so they won't change if we delete/insert an - * item or rearrange the list (it needs to be stable across platforms, not - * just within a single compiled instance). - */ -enum host_event_code { - EC_HOST_EVENT_LID_CLOSED = 1, - EC_HOST_EVENT_LID_OPEN = 2, - EC_HOST_EVENT_POWER_BUTTON = 3, - EC_HOST_EVENT_AC_CONNECTED = 4, - EC_HOST_EVENT_AC_DISCONNECTED = 5, - EC_HOST_EVENT_BATTERY_LOW = 6, - EC_HOST_EVENT_BATTERY_CRITICAL = 7, - EC_HOST_EVENT_BATTERY = 8, - EC_HOST_EVENT_THERMAL_THRESHOLD = 9, - /* Event generated by a device attached to the EC */ - EC_HOST_EVENT_DEVICE = 10, - EC_HOST_EVENT_THERMAL = 11, - EC_HOST_EVENT_USB_CHARGER = 12, - EC_HOST_EVENT_KEY_PRESSED = 13, - /* - * EC has finished initializing the host interface. The host can check - * for this event following sending a EC_CMD_REBOOT_EC command to - * determine when the EC is ready to accept subsequent commands. - */ - EC_HOST_EVENT_INTERFACE_READY = 14, - /* Keyboard recovery combo has been pressed */ - EC_HOST_EVENT_KEYBOARD_RECOVERY = 15, - - /* Shutdown due to thermal overload */ - EC_HOST_EVENT_THERMAL_SHUTDOWN = 16, - /* Shutdown due to battery level too low */ - EC_HOST_EVENT_BATTERY_SHUTDOWN = 17, - - /* Suggest that the AP throttle itself */ - EC_HOST_EVENT_THROTTLE_START = 18, - /* Suggest that the AP resume normal speed */ - EC_HOST_EVENT_THROTTLE_STOP = 19, - - /* Hang detect logic detected a hang and host event timeout expired */ - EC_HOST_EVENT_HANG_DETECT = 20, - /* Hang detect logic detected a hang and warm rebooted the AP */ - EC_HOST_EVENT_HANG_REBOOT = 21, - - /* PD MCU triggering host event */ - EC_HOST_EVENT_PD_MCU = 22, - - /* Battery Status flags have changed */ - EC_HOST_EVENT_BATTERY_STATUS = 23, - - /* EC encountered a panic, triggering a reset */ - EC_HOST_EVENT_PANIC = 24, - - /* Keyboard fastboot combo has been pressed */ - EC_HOST_EVENT_KEYBOARD_FASTBOOT = 25, - - /* EC RTC event occurred */ - EC_HOST_EVENT_RTC = 26, - - /* Emulate MKBP event */ - EC_HOST_EVENT_MKBP = 27, - - /* EC desires to change state of host-controlled USB mux */ - EC_HOST_EVENT_USB_MUX = 28, - - /* TABLET/LAPTOP mode or detachable base attach/detach event */ - EC_HOST_EVENT_MODE_CHANGE = 29, - - /* Keyboard recovery combo with hardware reinitialization */ - EC_HOST_EVENT_KEYBOARD_RECOVERY_HW_REINIT = 30, - - /* - * The high bit of the event mask is not used as a host event code. If - * it reads back as set, then the entire event mask should be - * considered invalid by the host. This can happen when reading the - * raw event status via EC_MEMMAP_HOST_EVENTS but the LPC interface is - * not initialized on the EC, or improperly configured on the host. - */ - EC_HOST_EVENT_INVALID = 32 -}; -/* Host event mask */ -#define EC_HOST_EVENT_MASK(event_code) BIT_ULL((event_code) - 1) - -/** - * struct ec_lpc_host_args - Arguments at EC_LPC_ADDR_HOST_ARGS - * @flags: The host argument flags. - * @command_version: Command version. - * @data_size: The length of data. - * @checksum: Checksum; sum of command + flags + command_version + data_size + - * all params/response data bytes. - */ -struct ec_lpc_host_args { - uint8_t flags; - uint8_t command_version; - uint8_t data_size; - uint8_t checksum; -} __ec_align4; - -/* Flags for ec_lpc_host_args.flags */ -/* - * Args are from host. Data area at EC_LPC_ADDR_HOST_PARAM contains command - * params. - * - * If EC gets a command and this flag is not set, this is an old-style command. - * Command version is 0 and params from host are at EC_LPC_ADDR_OLD_PARAM with - * unknown length. EC must respond with an old-style response (that is, - * without setting EC_HOST_ARGS_FLAG_TO_HOST). - */ -#define EC_HOST_ARGS_FLAG_FROM_HOST 0x01 -/* - * Args are from EC. Data area at EC_LPC_ADDR_HOST_PARAM contains response. - * - * If EC responds to a command and this flag is not set, this is an old-style - * response. Command version is 0 and response data from EC is at - * EC_LPC_ADDR_OLD_PARAM with unknown length. - */ -#define EC_HOST_ARGS_FLAG_TO_HOST 0x02 - -/*****************************************************************************/ -/* - * Byte codes returned by EC over SPI interface. - * - * These can be used by the AP to debug the EC interface, and to determine - * when the EC is not in a state where it will ever get around to responding - * to the AP. - * - * Example of sequence of bytes read from EC for a current good transfer: - * 1. - - AP asserts chip select (CS#) - * 2. EC_SPI_OLD_READY - AP sends first byte(s) of request - * 3. - - EC starts handling CS# interrupt - * 4. EC_SPI_RECEIVING - AP sends remaining byte(s) of request - * 5. EC_SPI_PROCESSING - EC starts processing request; AP is clocking in - * bytes looking for EC_SPI_FRAME_START - * 6. - - EC finishes processing and sets up response - * 7. EC_SPI_FRAME_START - AP reads frame byte - * 8. (response packet) - AP reads response packet - * 9. EC_SPI_PAST_END - Any additional bytes read by AP - * 10 - - AP deasserts chip select - * 11 - - EC processes CS# interrupt and sets up DMA for - * next request - * - * If the AP is waiting for EC_SPI_FRAME_START and sees any value other than - * the following byte values: - * EC_SPI_OLD_READY - * EC_SPI_RX_READY - * EC_SPI_RECEIVING - * EC_SPI_PROCESSING - * - * Then the EC found an error in the request, or was not ready for the request - * and lost data. The AP should give up waiting for EC_SPI_FRAME_START, - * because the EC is unable to tell when the AP is done sending its request. - */ - -/* - * Framing byte which precedes a response packet from the EC. After sending a - * request, the AP will clock in bytes until it sees the framing byte, then - * clock in the response packet. - */ -#define EC_SPI_FRAME_START 0xec - -/* - * Padding bytes which are clocked out after the end of a response packet. - */ -#define EC_SPI_PAST_END 0xed - -/* - * EC is ready to receive, and has ignored the byte sent by the AP. EC expects - * that the AP will send a valid packet header (starting with - * EC_COMMAND_PROTOCOL_3) in the next 32 bytes. - */ -#define EC_SPI_RX_READY 0xf8 - -/* - * EC has started receiving the request from the AP, but hasn't started - * processing it yet. - */ -#define EC_SPI_RECEIVING 0xf9 - -/* EC has received the entire request from the AP and is processing it. */ -#define EC_SPI_PROCESSING 0xfa - -/* - * EC received bad data from the AP, such as a packet header with an invalid - * length. EC will ignore all data until chip select deasserts. - */ -#define EC_SPI_RX_BAD_DATA 0xfb - -/* - * EC received data from the AP before it was ready. That is, the AP asserted - * chip select and started clocking data before the EC was ready to receive it. - * EC will ignore all data until chip select deasserts. - */ -#define EC_SPI_NOT_READY 0xfc - -/* - * EC was ready to receive a request from the AP. EC has treated the byte sent - * by the AP as part of a request packet, or (for old-style ECs) is processing - * a fully received packet but is not ready to respond yet. - */ -#define EC_SPI_OLD_READY 0xfd - -/*****************************************************************************/ - -/* - * Protocol version 2 for I2C and SPI send a request this way: - * - * 0 EC_CMD_VERSION0 + (command version) - * 1 Command number - * 2 Length of params = N - * 3..N+2 Params, if any - * N+3 8-bit checksum of bytes 0..N+2 - * - * The corresponding response is: - * - * 0 Result code (EC_RES_*) - * 1 Length of params = M - * 2..M+1 Params, if any - * M+2 8-bit checksum of bytes 0..M+1 - */ -#define EC_PROTO2_REQUEST_HEADER_BYTES 3 -#define EC_PROTO2_REQUEST_TRAILER_BYTES 1 -#define EC_PROTO2_REQUEST_OVERHEAD (EC_PROTO2_REQUEST_HEADER_BYTES + \ - EC_PROTO2_REQUEST_TRAILER_BYTES) - -#define EC_PROTO2_RESPONSE_HEADER_BYTES 2 -#define EC_PROTO2_RESPONSE_TRAILER_BYTES 1 -#define EC_PROTO2_RESPONSE_OVERHEAD (EC_PROTO2_RESPONSE_HEADER_BYTES + \ - EC_PROTO2_RESPONSE_TRAILER_BYTES) - -/* Parameter length was limited by the LPC interface */ -#define EC_PROTO2_MAX_PARAM_SIZE 0xfc - -/* Maximum request and response packet sizes for protocol version 2 */ -#define EC_PROTO2_MAX_REQUEST_SIZE (EC_PROTO2_REQUEST_OVERHEAD + \ - EC_PROTO2_MAX_PARAM_SIZE) -#define EC_PROTO2_MAX_RESPONSE_SIZE (EC_PROTO2_RESPONSE_OVERHEAD + \ - EC_PROTO2_MAX_PARAM_SIZE) - -/*****************************************************************************/ - -/* - * Value written to legacy command port / prefix byte to indicate protocol - * 3+ structs are being used. Usage is bus-dependent. - */ -#define EC_COMMAND_PROTOCOL_3 0xda - -#define EC_HOST_REQUEST_VERSION 3 - -/** - * struct ec_host_request - Version 3 request from host. - * @struct_version: Should be 3. The EC will return EC_RES_INVALID_HEADER if it - * receives a header with a version it doesn't know how to - * parse. - * @checksum: Checksum of request and data; sum of all bytes including checksum - * should total to 0. - * @command: Command to send (EC_CMD_...) - * @command_version: Command version. - * @reserved: Unused byte in current protocol version; set to 0. - * @data_len: Length of data which follows this header. - */ -struct ec_host_request { - uint8_t struct_version; - uint8_t checksum; - uint16_t command; - uint8_t command_version; - uint8_t reserved; - uint16_t data_len; -} __ec_align4; - -#define EC_HOST_RESPONSE_VERSION 3 - -/** - * struct ec_host_response - Version 3 response from EC. - * @struct_version: Struct version (=3). - * @checksum: Checksum of response and data; sum of all bytes including - * checksum should total to 0. - * @result: EC's response to the command (separate from communication failure) - * @data_len: Length of data which follows this header. - * @reserved: Unused bytes in current protocol version; set to 0. - */ -struct ec_host_response { - uint8_t struct_version; - uint8_t checksum; - uint16_t result; - uint16_t data_len; - uint16_t reserved; -} __ec_align4; - -/*****************************************************************************/ - -/* - * Host command protocol V4. - * - * Packets always start with a request or response header. They are followed - * by data_len bytes of data. If the data_crc_present flag is set, the data - * bytes are followed by a CRC-8 of that data, using using x^8 + x^2 + x + 1 - * polynomial. - * - * Host algorithm when sending a request q: - * - * 101) tries_left=(some value, e.g. 3); - * 102) q.seq_num++ - * 103) q.seq_dup=0 - * 104) Calculate q.header_crc. - * 105) Send request q to EC. - * 106) Wait for response r. Go to 201 if received or 301 if timeout. - * - * 201) If r.struct_version != 4, go to 301. - * 202) If r.header_crc mismatches calculated CRC for r header, go to 301. - * 203) If r.data_crc_present and r.data_crc mismatches, go to 301. - * 204) If r.seq_num != q.seq_num, go to 301. - * 205) If r.seq_dup == q.seq_dup, return success. - * 207) If r.seq_dup == 1, go to 301. - * 208) Return error. - * - * 301) If --tries_left <= 0, return error. - * 302) If q.seq_dup == 1, go to 105. - * 303) q.seq_dup = 1 - * 304) Go to 104. - * - * EC algorithm when receiving a request q. - * EC has response buffer r, error buffer e. - * - * 101) If q.struct_version != 4, set e.result = EC_RES_INVALID_HEADER_VERSION - * and go to 301 - * 102) If q.header_crc mismatches calculated CRC, set e.result = - * EC_RES_INVALID_HEADER_CRC and go to 301 - * 103) If q.data_crc_present, calculate data CRC. If that mismatches the CRC - * byte at the end of the packet, set e.result = EC_RES_INVALID_DATA_CRC - * and go to 301. - * 104) If q.seq_dup == 0, go to 201. - * 105) If q.seq_num != r.seq_num, go to 201. - * 106) If q.seq_dup == r.seq_dup, go to 205, else go to 203. - * - * 201) Process request q into response r. - * 202) r.seq_num = q.seq_num - * 203) r.seq_dup = q.seq_dup - * 204) Calculate r.header_crc - * 205) If r.data_len > 0 and data is no longer available, set e.result = - * EC_RES_DUP_UNAVAILABLE and go to 301. - * 206) Send response r. - * - * 301) e.seq_num = q.seq_num - * 302) e.seq_dup = q.seq_dup - * 303) Calculate e.header_crc. - * 304) Send error response e. - */ - -/* Version 4 request from host */ -struct ec_host_request4 { - /* - * bits 0-3: struct_version: Structure version (=4) - * bit 4: is_response: Is response (=0) - * bits 5-6: seq_num: Sequence number - * bit 7: seq_dup: Sequence duplicate flag - */ - uint8_t fields0; - - /* - * bits 0-4: command_version: Command version - * bits 5-6: Reserved (set 0, ignore on read) - * bit 7: data_crc_present: Is data CRC present after data - */ - uint8_t fields1; - - /* Command code (EC_CMD_*) */ - uint16_t command; - - /* Length of data which follows this header (not including data CRC) */ - uint16_t data_len; - - /* Reserved (set 0, ignore on read) */ - uint8_t reserved; - - /* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */ - uint8_t header_crc; -} __ec_align4; - -/* Version 4 response from EC */ -struct ec_host_response4 { - /* - * bits 0-3: struct_version: Structure version (=4) - * bit 4: is_response: Is response (=1) - * bits 5-6: seq_num: Sequence number - * bit 7: seq_dup: Sequence duplicate flag - */ - uint8_t fields0; - - /* - * bits 0-6: Reserved (set 0, ignore on read) - * bit 7: data_crc_present: Is data CRC present after data - */ - uint8_t fields1; - - /* Result code (EC_RES_*) */ - uint16_t result; - - /* Length of data which follows this header (not including data CRC) */ - uint16_t data_len; - - /* Reserved (set 0, ignore on read) */ - uint8_t reserved; - - /* CRC-8 of above fields, using x^8 + x^2 + x + 1 polynomial */ - uint8_t header_crc; -} __ec_align4; - -/* Fields in fields0 byte */ -#define EC_PACKET4_0_STRUCT_VERSION_MASK 0x0f -#define EC_PACKET4_0_IS_RESPONSE_MASK 0x10 -#define EC_PACKET4_0_SEQ_NUM_SHIFT 5 -#define EC_PACKET4_0_SEQ_NUM_MASK 0x60 -#define EC_PACKET4_0_SEQ_DUP_MASK 0x80 - -/* Fields in fields1 byte */ -#define EC_PACKET4_1_COMMAND_VERSION_MASK 0x1f /* (request only) */ -#define EC_PACKET4_1_DATA_CRC_PRESENT_MASK 0x80 - -/*****************************************************************************/ -/* - * Notes on commands: - * - * Each command is an 16-bit command value. Commands which take params or - * return response data specify structures for that data. If no structure is - * specified, the command does not input or output data, respectively. - * Parameter/response length is implicit in the structs. Some underlying - * communication protocols (I2C, SPI) may add length or checksum headers, but - * those are implementation-dependent and not defined here. - * - * All commands MUST be #defined to be 4-digit UPPER CASE hex values - * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. - */ - -/*****************************************************************************/ -/* General / test commands */ - -/* - * Get protocol version, used to deal with non-backward compatible protocol - * changes. - */ -#define EC_CMD_PROTO_VERSION 0x0000 - -/** - * struct ec_response_proto_version - Response to the proto version command. - * @version: The protocol version. - */ -struct ec_response_proto_version { - uint32_t version; -} __ec_align4; - -/* - * Hello. This is a simple command to test the EC is responsive to - * commands. - */ -#define EC_CMD_HELLO 0x0001 - -/** - * struct ec_params_hello - Parameters to the hello command. - * @in_data: Pass anything here. - */ -struct ec_params_hello { - uint32_t in_data; -} __ec_align4; - -/** - * struct ec_response_hello - Response to the hello command. - * @out_data: Output will be in_data + 0x01020304. - */ -struct ec_response_hello { - uint32_t out_data; -} __ec_align4; - -/* Get version number */ -#define EC_CMD_GET_VERSION 0x0002 - -enum ec_current_image { - EC_IMAGE_UNKNOWN = 0, - EC_IMAGE_RO, - EC_IMAGE_RW -}; - -/** - * struct ec_response_get_version - Response to the get version command. - * @version_string_ro: Null-terminated RO firmware version string. - * @version_string_rw: Null-terminated RW firmware version string. - * @reserved: Unused bytes; was previously RW-B firmware version string. - * @current_image: One of ec_current_image. - */ -struct ec_response_get_version { - char version_string_ro[32]; - char version_string_rw[32]; - char reserved[32]; - uint32_t current_image; -} __ec_align4; - -/* Read test */ -#define EC_CMD_READ_TEST 0x0003 - -/** - * struct ec_params_read_test - Parameters for the read test command. - * @offset: Starting value for read buffer. - * @size: Size to read in bytes. - */ -struct ec_params_read_test { - uint32_t offset; - uint32_t size; -} __ec_align4; - -/** - * struct ec_response_read_test - Response to the read test command. - * @data: Data returned by the read test command. - */ -struct ec_response_read_test { - uint32_t data[32]; -} __ec_align4; - -/* - * Get build information - * - * Response is null-terminated string. - */ -#define EC_CMD_GET_BUILD_INFO 0x0004 - -/* Get chip info */ -#define EC_CMD_GET_CHIP_INFO 0x0005 - -/** - * struct ec_response_get_chip_info - Response to the get chip info command. - * @vendor: Null-terminated string for chip vendor. - * @name: Null-terminated string for chip name. - * @revision: Null-terminated string for chip mask version. - */ -struct ec_response_get_chip_info { - char vendor[32]; - char name[32]; - char revision[32]; -} __ec_align4; - -/* Get board HW version */ -#define EC_CMD_GET_BOARD_VERSION 0x0006 - -/** - * struct ec_response_board_version - Response to the board version command. - * @board_version: A monotonously incrementing number. - */ -struct ec_response_board_version { - uint16_t board_version; -} __ec_align2; - -/* - * Read memory-mapped data. - * - * This is an alternate interface to memory-mapped data for bus protocols - * which don't support direct-mapped memory - I2C, SPI, etc. - * - * Response is params.size bytes of data. - */ -#define EC_CMD_READ_MEMMAP 0x0007 - -/** - * struct ec_params_read_memmap - Parameters for the read memory map command. - * @offset: Offset in memmap (EC_MEMMAP_*). - * @size: Size to read in bytes. - */ -struct ec_params_read_memmap { - uint8_t offset; - uint8_t size; -} __ec_align1; - -/* Read versions supported for a command */ -#define EC_CMD_GET_CMD_VERSIONS 0x0008 - -/** - * struct ec_params_get_cmd_versions - Parameters for the get command versions. - * @cmd: Command to check. - */ -struct ec_params_get_cmd_versions { - uint8_t cmd; -} __ec_align1; - -/** - * struct ec_params_get_cmd_versions_v1 - Parameters for the get command - * versions (v1) - * @cmd: Command to check. - */ -struct ec_params_get_cmd_versions_v1 { - uint16_t cmd; -} __ec_align2; - -/** - * struct ec_response_get_cmd_version - Response to the get command versions. - * @version_mask: Mask of supported versions; use EC_VER_MASK() to compare with - * a desired version. - */ -struct ec_response_get_cmd_versions { - uint32_t version_mask; -} __ec_align4; - -/* - * Check EC communications status (busy). This is needed on i2c/spi but not - * on lpc since it has its own out-of-band busy indicator. - * - * lpc must read the status from the command register. Attempting this on - * lpc will overwrite the args/parameter space and corrupt its data. - */ -#define EC_CMD_GET_COMMS_STATUS 0x0009 - -/* Avoid using ec_status which is for return values */ -enum ec_comms_status { - EC_COMMS_STATUS_PROCESSING = BIT(0), /* Processing cmd */ -}; - -/** - * struct ec_response_get_comms_status - Response to the get comms status - * command. - * @flags: Mask of enum ec_comms_status. - */ -struct ec_response_get_comms_status { - uint32_t flags; /* Mask of enum ec_comms_status */ -} __ec_align4; - -/* Fake a variety of responses, purely for testing purposes. */ -#define EC_CMD_TEST_PROTOCOL 0x000A - -/* Tell the EC what to send back to us. */ -struct ec_params_test_protocol { - uint32_t ec_result; - uint32_t ret_len; - uint8_t buf[32]; -} __ec_align4; - -/* Here it comes... */ -struct ec_response_test_protocol { - uint8_t buf[32]; -} __ec_align4; - -/* Get protocol information */ -#define EC_CMD_GET_PROTOCOL_INFO 0x000B - -/* Flags for ec_response_get_protocol_info.flags */ -/* EC_RES_IN_PROGRESS may be returned if a command is slow */ -#define EC_PROTOCOL_INFO_IN_PROGRESS_SUPPORTED BIT(0) - -/** - * struct ec_response_get_protocol_info - Response to the get protocol info. - * @protocol_versions: Bitmask of protocol versions supported (1 << n means - * version n). - * @max_request_packet_size: Maximum request packet size in bytes. - * @max_response_packet_size: Maximum response packet size in bytes. - * @flags: see EC_PROTOCOL_INFO_* - */ -struct ec_response_get_protocol_info { - /* Fields which exist if at least protocol version 3 supported */ - uint32_t protocol_versions; - uint16_t max_request_packet_size; - uint16_t max_response_packet_size; - uint32_t flags; -} __ec_align4; - - -/*****************************************************************************/ -/* Get/Set miscellaneous values */ - -/* The upper byte of .flags tells what to do (nothing means "get") */ -#define EC_GSV_SET 0x80000000 - -/* - * The lower three bytes of .flags identifies the parameter, if that has - * meaning for an individual command. - */ -#define EC_GSV_PARAM_MASK 0x00ffffff - -struct ec_params_get_set_value { - uint32_t flags; - uint32_t value; -} __ec_align4; - -struct ec_response_get_set_value { - uint32_t flags; - uint32_t value; -} __ec_align4; - -/* More than one command can use these structs to get/set parameters. */ -#define EC_CMD_GSV_PAUSE_IN_S5 0x000C - -/*****************************************************************************/ -/* List the features supported by the firmware */ -#define EC_CMD_GET_FEATURES 0x000D - -/* Supported features */ -enum ec_feature_code { - /* - * This image contains a limited set of features. Another image - * in RW partition may support more features. - */ - EC_FEATURE_LIMITED = 0, - /* - * Commands for probing/reading/writing/erasing the flash in the - * EC are present. - */ - EC_FEATURE_FLASH = 1, - /* - * Can control the fan speed directly. - */ - EC_FEATURE_PWM_FAN = 2, - /* - * Can control the intensity of the keyboard backlight. - */ - EC_FEATURE_PWM_KEYB = 3, - /* - * Support Google lightbar, introduced on Pixel. - */ - EC_FEATURE_LIGHTBAR = 4, - /* Control of LEDs */ - EC_FEATURE_LED = 5, - /* Exposes an interface to control gyro and sensors. - * The host goes through the EC to access these sensors. - * In addition, the EC may provide composite sensors, like lid angle. - */ - EC_FEATURE_MOTION_SENSE = 6, - /* The keyboard is controlled by the EC */ - EC_FEATURE_KEYB = 7, - /* The AP can use part of the EC flash as persistent storage. */ - EC_FEATURE_PSTORE = 8, - /* The EC monitors BIOS port 80h, and can return POST codes. */ - EC_FEATURE_PORT80 = 9, - /* - * Thermal management: include TMP specific commands. - * Higher level than direct fan control. - */ - EC_FEATURE_THERMAL = 10, - /* Can switch the screen backlight on/off */ - EC_FEATURE_BKLIGHT_SWITCH = 11, - /* Can switch the wifi module on/off */ - EC_FEATURE_WIFI_SWITCH = 12, - /* Monitor host events, through for example SMI or SCI */ - EC_FEATURE_HOST_EVENTS = 13, - /* The EC exposes GPIO commands to control/monitor connected devices. */ - EC_FEATURE_GPIO = 14, - /* The EC can send i2c messages to downstream devices. */ - EC_FEATURE_I2C = 15, - /* Command to control charger are included */ - EC_FEATURE_CHARGER = 16, - /* Simple battery support. */ - EC_FEATURE_BATTERY = 17, - /* - * Support Smart battery protocol - * (Common Smart Battery System Interface Specification) - */ - EC_FEATURE_SMART_BATTERY = 18, - /* EC can detect when the host hangs. */ - EC_FEATURE_HANG_DETECT = 19, - /* Report power information, for pit only */ - EC_FEATURE_PMU = 20, - /* Another Cros EC device is present downstream of this one */ - EC_FEATURE_SUB_MCU = 21, - /* Support USB Power delivery (PD) commands */ - EC_FEATURE_USB_PD = 22, - /* Control USB multiplexer, for audio through USB port for instance. */ - EC_FEATURE_USB_MUX = 23, - /* Motion Sensor code has an internal software FIFO */ - EC_FEATURE_MOTION_SENSE_FIFO = 24, - /* Support temporary secure vstore */ - EC_FEATURE_VSTORE = 25, - /* EC decides on USB-C SS mux state, muxes configured by host */ - EC_FEATURE_USBC_SS_MUX_VIRTUAL = 26, - /* EC has RTC feature that can be controlled by host commands */ - EC_FEATURE_RTC = 27, - /* The MCU exposes a Fingerprint sensor */ - EC_FEATURE_FINGERPRINT = 28, - /* The MCU exposes a Touchpad */ - EC_FEATURE_TOUCHPAD = 29, - /* The MCU has RWSIG task enabled */ - EC_FEATURE_RWSIG = 30, - /* EC has device events support */ - EC_FEATURE_DEVICE_EVENT = 31, - /* EC supports the unified wake masks for LPC/eSPI systems */ - EC_FEATURE_UNIFIED_WAKE_MASKS = 32, - /* EC supports 64-bit host events */ - EC_FEATURE_HOST_EVENT64 = 33, - /* EC runs code in RAM (not in place, a.k.a. XIP) */ - EC_FEATURE_EXEC_IN_RAM = 34, - /* EC supports CEC commands */ - EC_FEATURE_CEC = 35, - /* EC supports tight sensor timestamping. */ - EC_FEATURE_MOTION_SENSE_TIGHT_TIMESTAMPS = 36, - /* - * EC supports tablet mode detection aligned to Chrome and allows - * setting of threshold by host command using - * MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. - */ - EC_FEATURE_REFINED_TABLET_MODE_HYSTERESIS = 37, - /* EC supports audio codec. */ - EC_FEATURE_AUDIO_CODEC = 38, - /* The MCU is a System Companion Processor (SCP). */ - EC_FEATURE_SCP = 39, - /* The MCU is an Integrated Sensor Hub */ - EC_FEATURE_ISH = 40, -}; - -#define EC_FEATURE_MASK_0(event_code) BIT(event_code % 32) -#define EC_FEATURE_MASK_1(event_code) BIT(event_code - 32) - -struct ec_response_get_features { - uint32_t flags[2]; -} __ec_align4; - -/*****************************************************************************/ -/* Get the board's SKU ID from EC */ -#define EC_CMD_GET_SKU_ID 0x000E - -/* Set SKU ID from AP */ -#define EC_CMD_SET_SKU_ID 0x000F - -struct ec_sku_id_info { - uint32_t sku_id; -} __ec_align4; - -/*****************************************************************************/ -/* Flash commands */ - -/* Get flash info */ -#define EC_CMD_FLASH_INFO 0x0010 -#define EC_VER_FLASH_INFO 2 - -/** - * struct ec_response_flash_info - Response to the flash info command. - * @flash_size: Usable flash size in bytes. - * @write_block_size: Write block size. Write offset and size must be a - * multiple of this. - * @erase_block_size: Erase block size. Erase offset and size must be a - * multiple of this. - * @protect_block_size: Protection block size. Protection offset and size - * must be a multiple of this. - * - * Version 0 returns these fields. - */ -struct ec_response_flash_info { - uint32_t flash_size; - uint32_t write_block_size; - uint32_t erase_block_size; - uint32_t protect_block_size; -} __ec_align4; - -/* - * Flags for version 1+ flash info command - * EC flash erases bits to 0 instead of 1. - */ -#define EC_FLASH_INFO_ERASE_TO_0 BIT(0) - -/* - * Flash must be selected for read/write/erase operations to succeed. This may - * be necessary on a chip where write/erase can be corrupted by other board - * activity, or where the chip needs to enable some sort of programming voltage, - * or where the read/write/erase operations require cleanly suspending other - * chip functionality. - */ -#define EC_FLASH_INFO_SELECT_REQUIRED BIT(1) - -/** - * struct ec_response_flash_info_1 - Response to the flash info v1 command. - * @flash_size: Usable flash size in bytes. - * @write_block_size: Write block size. Write offset and size must be a - * multiple of this. - * @erase_block_size: Erase block size. Erase offset and size must be a - * multiple of this. - * @protect_block_size: Protection block size. Protection offset and size - * must be a multiple of this. - * @write_ideal_size: Ideal write size in bytes. Writes will be fastest if - * size is exactly this and offset is a multiple of this. - * For example, an EC may have a write buffer which can do - * half-page operations if data is aligned, and a slower - * word-at-a-time write mode. - * @flags: Flags; see EC_FLASH_INFO_* - * - * Version 1 returns the same initial fields as version 0, with additional - * fields following. - * - * gcc anonymous structs don't seem to get along with the __packed directive; - * if they did we'd define the version 0 structure as a sub-structure of this - * one. - * - * Version 2 supports flash banks of different sizes: - * The caller specified the number of banks it has preallocated - * (num_banks_desc) - * The EC returns the number of banks describing the flash memory. - * It adds banks descriptions up to num_banks_desc. - */ -struct ec_response_flash_info_1 { - /* Version 0 fields; see above for description */ - uint32_t flash_size; - uint32_t write_block_size; - uint32_t erase_block_size; - uint32_t protect_block_size; - - /* Version 1 adds these fields: */ - uint32_t write_ideal_size; - uint32_t flags; -} __ec_align4; - -struct ec_params_flash_info_2 { - /* Number of banks to describe */ - uint16_t num_banks_desc; - /* Reserved; set 0; ignore on read */ - uint8_t reserved[2]; -} __ec_align4; - -struct ec_flash_bank { - /* Number of sector is in this bank. */ - uint16_t count; - /* Size in power of 2 of each sector (8 --> 256 bytes) */ - uint8_t size_exp; - /* Minimal write size for the sectors in this bank */ - uint8_t write_size_exp; - /* Erase size for the sectors in this bank */ - uint8_t erase_size_exp; - /* Size for write protection, usually identical to erase size. */ - uint8_t protect_size_exp; - /* Reserved; set 0; ignore on read */ - uint8_t reserved[2]; -}; - -struct ec_response_flash_info_2 { - /* Total flash in the EC. */ - uint32_t flash_size; - /* Flags; see EC_FLASH_INFO_* */ - uint32_t flags; - /* Maximum size to use to send data to write to the EC. */ - uint32_t write_ideal_size; - /* Number of banks present in the EC. */ - uint16_t num_banks_total; - /* Number of banks described in banks array. */ - uint16_t num_banks_desc; - struct ec_flash_bank banks[0]; -} __ec_align4; - -/* - * Read flash - * - * Response is params.size bytes of data. - */ -#define EC_CMD_FLASH_READ 0x0011 - -/** - * struct ec_params_flash_read - Parameters for the flash read command. - * @offset: Byte offset to read. - * @size: Size to read in bytes. - */ -struct ec_params_flash_read { - uint32_t offset; - uint32_t size; -} __ec_align4; - -/* Write flash */ -#define EC_CMD_FLASH_WRITE 0x0012 -#define EC_VER_FLASH_WRITE 1 - -/* Version 0 of the flash command supported only 64 bytes of data */ -#define EC_FLASH_WRITE_VER0_SIZE 64 - -/** - * struct ec_params_flash_write - Parameters for the flash write command. - * @offset: Byte offset to write. - * @size: Size to write in bytes. - */ -struct ec_params_flash_write { - uint32_t offset; - uint32_t size; - /* Followed by data to write */ -} __ec_align4; - -/* Erase flash */ -#define EC_CMD_FLASH_ERASE 0x0013 - -/** - * struct ec_params_flash_erase - Parameters for the flash erase command, v0. - * @offset: Byte offset to erase. - * @size: Size to erase in bytes. - */ -struct ec_params_flash_erase { - uint32_t offset; - uint32_t size; -} __ec_align4; - -/* - * v1 add async erase: - * subcommands can returns: - * EC_RES_SUCCESS : erased (see ERASE_SECTOR_ASYNC case below). - * EC_RES_INVALID_PARAM : offset/size are not aligned on a erase boundary. - * EC_RES_ERROR : other errors. - * EC_RES_BUSY : an existing erase operation is in progress. - * EC_RES_ACCESS_DENIED: Trying to erase running image. - * - * When ERASE_SECTOR_ASYNC returns EC_RES_SUCCESS, the operation is just - * properly queued. The user must call ERASE_GET_RESULT subcommand to get - * the proper result. - * When ERASE_GET_RESULT returns EC_RES_BUSY, the caller must wait and send - * ERASE_GET_RESULT again to get the result of ERASE_SECTOR_ASYNC. - * ERASE_GET_RESULT command may timeout on EC where flash access is not - * permitted while erasing. (For instance, STM32F4). - */ -enum ec_flash_erase_cmd { - FLASH_ERASE_SECTOR, /* Erase and wait for result */ - FLASH_ERASE_SECTOR_ASYNC, /* Erase and return immediately. */ - FLASH_ERASE_GET_RESULT, /* Ask for last erase result */ -}; - -/** - * struct ec_params_flash_erase_v1 - Parameters for the flash erase command, v1. - * @cmd: One of ec_flash_erase_cmd. - * @reserved: Pad byte; currently always contains 0. - * @flag: No flags defined yet; set to 0. - * @params: Same as v0 parameters. - */ -struct ec_params_flash_erase_v1 { - uint8_t cmd; - uint8_t reserved; - uint16_t flag; - struct ec_params_flash_erase params; -} __ec_align4; - -/* - * Get/set flash protection. - * - * If mask!=0, sets/clear the requested bits of flags. Depending on the - * firmware write protect GPIO, not all flags will take effect immediately; - * some flags require a subsequent hard reset to take effect. Check the - * returned flags bits to see what actually happened. - * - * If mask=0, simply returns the current flags state. - */ -#define EC_CMD_FLASH_PROTECT 0x0015 -#define EC_VER_FLASH_PROTECT 1 /* Command version 1 */ - -/* Flags for flash protection */ -/* RO flash code protected when the EC boots */ -#define EC_FLASH_PROTECT_RO_AT_BOOT BIT(0) -/* - * RO flash code protected now. If this bit is set, at-boot status cannot - * be changed. - */ -#define EC_FLASH_PROTECT_RO_NOW BIT(1) -/* Entire flash code protected now, until reboot. */ -#define EC_FLASH_PROTECT_ALL_NOW BIT(2) -/* Flash write protect GPIO is asserted now */ -#define EC_FLASH_PROTECT_GPIO_ASSERTED BIT(3) -/* Error - at least one bank of flash is stuck locked, and cannot be unlocked */ -#define EC_FLASH_PROTECT_ERROR_STUCK BIT(4) -/* - * Error - flash protection is in inconsistent state. At least one bank of - * flash which should be protected is not protected. Usually fixed by - * re-requesting the desired flags, or by a hard reset if that fails. - */ -#define EC_FLASH_PROTECT_ERROR_INCONSISTENT BIT(5) -/* Entire flash code protected when the EC boots */ -#define EC_FLASH_PROTECT_ALL_AT_BOOT BIT(6) -/* RW flash code protected when the EC boots */ -#define EC_FLASH_PROTECT_RW_AT_BOOT BIT(7) -/* RW flash code protected now. */ -#define EC_FLASH_PROTECT_RW_NOW BIT(8) -/* Rollback information flash region protected when the EC boots */ -#define EC_FLASH_PROTECT_ROLLBACK_AT_BOOT BIT(9) -/* Rollback information flash region protected now */ -#define EC_FLASH_PROTECT_ROLLBACK_NOW BIT(10) - - -/** - * struct ec_params_flash_protect - Parameters for the flash protect command. - * @mask: Bits in flags to apply. - * @flags: New flags to apply. - */ -struct ec_params_flash_protect { - uint32_t mask; - uint32_t flags; -} __ec_align4; - -/** - * struct ec_response_flash_protect - Response to the flash protect command. - * @flags: Current value of flash protect flags. - * @valid_flags: Flags which are valid on this platform. This allows the - * caller to distinguish between flags which aren't set vs. flags - * which can't be set on this platform. - * @writable_flags: Flags which can be changed given the current protection - * state. - */ -struct ec_response_flash_protect { - uint32_t flags; - uint32_t valid_flags; - uint32_t writable_flags; -} __ec_align4; - -/* - * Note: commands 0x14 - 0x19 version 0 were old commands to get/set flash - * write protect. These commands may be reused with version > 0. - */ - -/* Get the region offset/size */ -#define EC_CMD_FLASH_REGION_INFO 0x0016 -#define EC_VER_FLASH_REGION_INFO 1 - -enum ec_flash_region { - /* Region which holds read-only EC image */ - EC_FLASH_REGION_RO = 0, - /* - * Region which holds active RW image. 'Active' is different from - * 'running'. Active means 'scheduled-to-run'. Since RO image always - * scheduled to run, active/non-active applies only to RW images (for - * the same reason 'update' applies only to RW images. It's a state of - * an image on a flash. Running image can be RO, RW_A, RW_B but active - * image can only be RW_A or RW_B. In recovery mode, an active RW image - * doesn't enter 'running' state but it's still active on a flash. - */ - EC_FLASH_REGION_ACTIVE, - /* - * Region which should be write-protected in the factory (a superset of - * EC_FLASH_REGION_RO) - */ - EC_FLASH_REGION_WP_RO, - /* Region which holds updatable (non-active) RW image */ - EC_FLASH_REGION_UPDATE, - /* Number of regions */ - EC_FLASH_REGION_COUNT, -}; -/* - * 'RW' is vague if there are multiple RW images; we mean the active one, - * so the old constant is deprecated. - */ -#define EC_FLASH_REGION_RW EC_FLASH_REGION_ACTIVE - -/** - * struct ec_params_flash_region_info - Parameters for the flash region info - * command. - * @region: Flash region; see EC_FLASH_REGION_* - */ -struct ec_params_flash_region_info { - uint32_t region; -} __ec_align4; - -struct ec_response_flash_region_info { - uint32_t offset; - uint32_t size; -} __ec_align4; - -/* Read/write VbNvContext */ -#define EC_CMD_VBNV_CONTEXT 0x0017 -#define EC_VER_VBNV_CONTEXT 1 -#define EC_VBNV_BLOCK_SIZE 16 - -enum ec_vbnvcontext_op { - EC_VBNV_CONTEXT_OP_READ, - EC_VBNV_CONTEXT_OP_WRITE, -}; - -struct ec_params_vbnvcontext { - uint32_t op; - uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __ec_align4; - -struct ec_response_vbnvcontext { - uint8_t block[EC_VBNV_BLOCK_SIZE]; -} __ec_align4; - - -/* Get SPI flash information */ -#define EC_CMD_FLASH_SPI_INFO 0x0018 - -struct ec_response_flash_spi_info { - /* JEDEC info from command 0x9F (manufacturer, memory type, size) */ - uint8_t jedec[3]; - - /* Pad byte; currently always contains 0 */ - uint8_t reserved0; - - /* Manufacturer / device ID from command 0x90 */ - uint8_t mfr_dev_id[2]; - - /* Status registers from command 0x05 and 0x35 */ - uint8_t sr1, sr2; -} __ec_align1; - - -/* Select flash during flash operations */ -#define EC_CMD_FLASH_SELECT 0x0019 - -/** - * struct ec_params_flash_select - Parameters for the flash select command. - * @select: 1 to select flash, 0 to deselect flash - */ -struct ec_params_flash_select { - uint8_t select; -} __ec_align4; - - -/*****************************************************************************/ -/* PWM commands */ - -/* Get fan target RPM */ -#define EC_CMD_PWM_GET_FAN_TARGET_RPM 0x0020 - -struct ec_response_pwm_get_fan_rpm { - uint32_t rpm; -} __ec_align4; - -/* Set target fan RPM */ -#define EC_CMD_PWM_SET_FAN_TARGET_RPM 0x0021 - -/* Version 0 of input params */ -struct ec_params_pwm_set_fan_target_rpm_v0 { - uint32_t rpm; -} __ec_align4; - -/* Version 1 of input params */ -struct ec_params_pwm_set_fan_target_rpm_v1 { - uint32_t rpm; - uint8_t fan_idx; -} __ec_align_size1; - -/* Get keyboard backlight */ -/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ -#define EC_CMD_PWM_GET_KEYBOARD_BACKLIGHT 0x0022 - -struct ec_response_pwm_get_keyboard_backlight { - uint8_t percent; - uint8_t enabled; -} __ec_align1; - -/* Set keyboard backlight */ -/* OBSOLETE - Use EC_CMD_PWM_SET_DUTY */ -#define EC_CMD_PWM_SET_KEYBOARD_BACKLIGHT 0x0023 - -struct ec_params_pwm_set_keyboard_backlight { - uint8_t percent; -} __ec_align1; - -/* Set target fan PWM duty cycle */ -#define EC_CMD_PWM_SET_FAN_DUTY 0x0024 - -/* Version 0 of input params */ -struct ec_params_pwm_set_fan_duty_v0 { - uint32_t percent; -} __ec_align4; - -/* Version 1 of input params */ -struct ec_params_pwm_set_fan_duty_v1 { - uint32_t percent; - uint8_t fan_idx; -} __ec_align_size1; - -#define EC_CMD_PWM_SET_DUTY 0x0025 -/* 16 bit duty cycle, 0xffff = 100% */ -#define EC_PWM_MAX_DUTY 0xffff - -enum ec_pwm_type { - /* All types, indexed by board-specific enum pwm_channel */ - EC_PWM_TYPE_GENERIC = 0, - /* Keyboard backlight */ - EC_PWM_TYPE_KB_LIGHT, - /* Display backlight */ - EC_PWM_TYPE_DISPLAY_LIGHT, - EC_PWM_TYPE_COUNT, -}; - -struct ec_params_pwm_set_duty { - uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ - uint8_t pwm_type; /* ec_pwm_type */ - uint8_t index; /* Type-specific index, or 0 if unique */ -} __ec_align4; - -#define EC_CMD_PWM_GET_DUTY 0x0026 - -struct ec_params_pwm_get_duty { - uint8_t pwm_type; /* ec_pwm_type */ - uint8_t index; /* Type-specific index, or 0 if unique */ -} __ec_align1; - -struct ec_response_pwm_get_duty { - uint16_t duty; /* Duty cycle, EC_PWM_MAX_DUTY = 100% */ -} __ec_align2; - -/*****************************************************************************/ -/* - * Lightbar commands. This looks worse than it is. Since we only use one HOST - * command to say "talk to the lightbar", we put the "and tell it to do X" part - * into a subcommand. We'll make separate structs for subcommands with - * different input args, so that we know how much to expect. - */ -#define EC_CMD_LIGHTBAR_CMD 0x0028 - -struct rgb_s { - uint8_t r, g, b; -} __ec_todo_unpacked; - -#define LB_BATTERY_LEVELS 4 - -/* - * List of tweakable parameters. NOTE: It's __packed so it can be sent in a - * host command, but the alignment is the same regardless. Keep it that way. - */ -struct lightbar_params_v0 { - /* Timing */ - int32_t google_ramp_up; - int32_t google_ramp_down; - int32_t s3s0_ramp_up; - int32_t s0_tick_delay[2]; /* AC=0/1 */ - int32_t s0a_tick_delay[2]; /* AC=0/1 */ - int32_t s0s3_ramp_down; - int32_t s3_sleep_for; - int32_t s3_ramp_up; - int32_t s3_ramp_down; - - /* Oscillation */ - uint8_t new_s0; - uint8_t osc_min[2]; /* AC=0/1 */ - uint8_t osc_max[2]; /* AC=0/1 */ - uint8_t w_ofs[2]; /* AC=0/1 */ - - /* Brightness limits based on the backlight and AC. */ - uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ - uint8_t bright_bl_on_min[2]; /* AC=0/1 */ - uint8_t bright_bl_on_max[2]; /* AC=0/1 */ - - /* Battery level thresholds */ - uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; - - /* Map [AC][battery_level] to color index */ - uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ - uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ - - /* Color palette */ - struct rgb_s color[8]; /* 0-3 are Google colors */ -} __ec_todo_packed; - -struct lightbar_params_v1 { - /* Timing */ - int32_t google_ramp_up; - int32_t google_ramp_down; - int32_t s3s0_ramp_up; - int32_t s0_tick_delay[2]; /* AC=0/1 */ - int32_t s0a_tick_delay[2]; /* AC=0/1 */ - int32_t s0s3_ramp_down; - int32_t s3_sleep_for; - int32_t s3_ramp_up; - int32_t s3_ramp_down; - int32_t s5_ramp_up; - int32_t s5_ramp_down; - int32_t tap_tick_delay; - int32_t tap_gate_delay; - int32_t tap_display_time; - - /* Tap-for-battery params */ - uint8_t tap_pct_red; - uint8_t tap_pct_green; - uint8_t tap_seg_min_on; - uint8_t tap_seg_max_on; - uint8_t tap_seg_osc; - uint8_t tap_idx[3]; - - /* Oscillation */ - uint8_t osc_min[2]; /* AC=0/1 */ - uint8_t osc_max[2]; /* AC=0/1 */ - uint8_t w_ofs[2]; /* AC=0/1 */ - - /* Brightness limits based on the backlight and AC. */ - uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ - uint8_t bright_bl_on_min[2]; /* AC=0/1 */ - uint8_t bright_bl_on_max[2]; /* AC=0/1 */ - - /* Battery level thresholds */ - uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; - - /* Map [AC][battery_level] to color index */ - uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ - uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ - - /* s5: single color pulse on inhibited power-up */ - uint8_t s5_idx; - - /* Color palette */ - struct rgb_s color[8]; /* 0-3 are Google colors */ -} __ec_todo_packed; - -/* Lightbar command params v2 - * crbug.com/467716 - * - * lightbar_parms_v1 was too big for i2c, therefore in v2, we split them up by - * logical groups to make it more manageable ( < 120 bytes). - * - * NOTE: Each of these groups must be less than 120 bytes. - */ - -struct lightbar_params_v2_timing { - /* Timing */ - int32_t google_ramp_up; - int32_t google_ramp_down; - int32_t s3s0_ramp_up; - int32_t s0_tick_delay[2]; /* AC=0/1 */ - int32_t s0a_tick_delay[2]; /* AC=0/1 */ - int32_t s0s3_ramp_down; - int32_t s3_sleep_for; - int32_t s3_ramp_up; - int32_t s3_ramp_down; - int32_t s5_ramp_up; - int32_t s5_ramp_down; - int32_t tap_tick_delay; - int32_t tap_gate_delay; - int32_t tap_display_time; -} __ec_todo_packed; - -struct lightbar_params_v2_tap { - /* Tap-for-battery params */ - uint8_t tap_pct_red; - uint8_t tap_pct_green; - uint8_t tap_seg_min_on; - uint8_t tap_seg_max_on; - uint8_t tap_seg_osc; - uint8_t tap_idx[3]; -} __ec_todo_packed; - -struct lightbar_params_v2_oscillation { - /* Oscillation */ - uint8_t osc_min[2]; /* AC=0/1 */ - uint8_t osc_max[2]; /* AC=0/1 */ - uint8_t w_ofs[2]; /* AC=0/1 */ -} __ec_todo_packed; - -struct lightbar_params_v2_brightness { - /* Brightness limits based on the backlight and AC. */ - uint8_t bright_bl_off_fixed[2]; /* AC=0/1 */ - uint8_t bright_bl_on_min[2]; /* AC=0/1 */ - uint8_t bright_bl_on_max[2]; /* AC=0/1 */ -} __ec_todo_packed; - -struct lightbar_params_v2_thresholds { - /* Battery level thresholds */ - uint8_t battery_threshold[LB_BATTERY_LEVELS - 1]; -} __ec_todo_packed; - -struct lightbar_params_v2_colors { - /* Map [AC][battery_level] to color index */ - uint8_t s0_idx[2][LB_BATTERY_LEVELS]; /* AP is running */ - uint8_t s3_idx[2][LB_BATTERY_LEVELS]; /* AP is sleeping */ - - /* s5: single color pulse on inhibited power-up */ - uint8_t s5_idx; - - /* Color palette */ - struct rgb_s color[8]; /* 0-3 are Google colors */ -} __ec_todo_packed; - -/* Lightbar program. */ -#define EC_LB_PROG_LEN 192 -struct lightbar_program { - uint8_t size; - uint8_t data[EC_LB_PROG_LEN]; -} __ec_todo_unpacked; - -struct ec_params_lightbar { - uint8_t cmd; /* Command (see enum lightbar_command) */ - union { - /* - * The following commands have no args: - * - * dump, off, on, init, get_seq, get_params_v0, get_params_v1, - * version, get_brightness, get_demo, suspend, resume, - * get_params_v2_timing, get_params_v2_tap, get_params_v2_osc, - * get_params_v2_bright, get_params_v2_thlds, - * get_params_v2_colors - * - * Don't use an empty struct, because C++ hates that. - */ - - struct __ec_todo_unpacked { - uint8_t num; - } set_brightness, seq, demo; - - struct __ec_todo_unpacked { - uint8_t ctrl, reg, value; - } reg; - - struct __ec_todo_unpacked { - uint8_t led, red, green, blue; - } set_rgb; - - struct __ec_todo_unpacked { - uint8_t led; - } get_rgb; - - struct __ec_todo_unpacked { - uint8_t enable; - } manual_suspend_ctrl; - - struct lightbar_params_v0 set_params_v0; - struct lightbar_params_v1 set_params_v1; - - struct lightbar_params_v2_timing set_v2par_timing; - struct lightbar_params_v2_tap set_v2par_tap; - struct lightbar_params_v2_oscillation set_v2par_osc; - struct lightbar_params_v2_brightness set_v2par_bright; - struct lightbar_params_v2_thresholds set_v2par_thlds; - struct lightbar_params_v2_colors set_v2par_colors; - - struct lightbar_program set_program; - }; -} __ec_todo_packed; - -struct ec_response_lightbar { - union { - struct __ec_todo_unpacked { - struct __ec_todo_unpacked { - uint8_t reg; - uint8_t ic0; - uint8_t ic1; - } vals[23]; - } dump; - - struct __ec_todo_unpacked { - uint8_t num; - } get_seq, get_brightness, get_demo; - - struct lightbar_params_v0 get_params_v0; - struct lightbar_params_v1 get_params_v1; - - - struct lightbar_params_v2_timing get_params_v2_timing; - struct lightbar_params_v2_tap get_params_v2_tap; - struct lightbar_params_v2_oscillation get_params_v2_osc; - struct lightbar_params_v2_brightness get_params_v2_bright; - struct lightbar_params_v2_thresholds get_params_v2_thlds; - struct lightbar_params_v2_colors get_params_v2_colors; - - struct __ec_todo_unpacked { - uint32_t num; - uint32_t flags; - } version; - - struct __ec_todo_unpacked { - uint8_t red, green, blue; - } get_rgb; - - /* - * The following commands have no response: - * - * off, on, init, set_brightness, seq, reg, set_rgb, demo, - * set_params_v0, set_params_v1, set_program, - * manual_suspend_ctrl, suspend, resume, set_v2par_timing, - * set_v2par_tap, set_v2par_osc, set_v2par_bright, - * set_v2par_thlds, set_v2par_colors - */ - }; -} __ec_todo_packed; - -/* Lightbar commands */ -enum lightbar_command { - LIGHTBAR_CMD_DUMP = 0, - LIGHTBAR_CMD_OFF = 1, - LIGHTBAR_CMD_ON = 2, - LIGHTBAR_CMD_INIT = 3, - LIGHTBAR_CMD_SET_BRIGHTNESS = 4, - LIGHTBAR_CMD_SEQ = 5, - LIGHTBAR_CMD_REG = 6, - LIGHTBAR_CMD_SET_RGB = 7, - LIGHTBAR_CMD_GET_SEQ = 8, - LIGHTBAR_CMD_DEMO = 9, - LIGHTBAR_CMD_GET_PARAMS_V0 = 10, - LIGHTBAR_CMD_SET_PARAMS_V0 = 11, - LIGHTBAR_CMD_VERSION = 12, - LIGHTBAR_CMD_GET_BRIGHTNESS = 13, - LIGHTBAR_CMD_GET_RGB = 14, - LIGHTBAR_CMD_GET_DEMO = 15, - LIGHTBAR_CMD_GET_PARAMS_V1 = 16, - LIGHTBAR_CMD_SET_PARAMS_V1 = 17, - LIGHTBAR_CMD_SET_PROGRAM = 18, - LIGHTBAR_CMD_MANUAL_SUSPEND_CTRL = 19, - LIGHTBAR_CMD_SUSPEND = 20, - LIGHTBAR_CMD_RESUME = 21, - LIGHTBAR_CMD_GET_PARAMS_V2_TIMING = 22, - LIGHTBAR_CMD_SET_PARAMS_V2_TIMING = 23, - LIGHTBAR_CMD_GET_PARAMS_V2_TAP = 24, - LIGHTBAR_CMD_SET_PARAMS_V2_TAP = 25, - LIGHTBAR_CMD_GET_PARAMS_V2_OSCILLATION = 26, - LIGHTBAR_CMD_SET_PARAMS_V2_OSCILLATION = 27, - LIGHTBAR_CMD_GET_PARAMS_V2_BRIGHTNESS = 28, - LIGHTBAR_CMD_SET_PARAMS_V2_BRIGHTNESS = 29, - LIGHTBAR_CMD_GET_PARAMS_V2_THRESHOLDS = 30, - LIGHTBAR_CMD_SET_PARAMS_V2_THRESHOLDS = 31, - LIGHTBAR_CMD_GET_PARAMS_V2_COLORS = 32, - LIGHTBAR_CMD_SET_PARAMS_V2_COLORS = 33, - LIGHTBAR_NUM_CMDS -}; - -/*****************************************************************************/ -/* LED control commands */ - -#define EC_CMD_LED_CONTROL 0x0029 - -enum ec_led_id { - /* LED to indicate battery state of charge */ - EC_LED_ID_BATTERY_LED = 0, - /* - * LED to indicate system power state (on or in suspend). - * May be on power button or on C-panel. - */ - EC_LED_ID_POWER_LED, - /* LED on power adapter or its plug */ - EC_LED_ID_ADAPTER_LED, - /* LED to indicate left side */ - EC_LED_ID_LEFT_LED, - /* LED to indicate right side */ - EC_LED_ID_RIGHT_LED, - /* LED to indicate recovery mode with HW_REINIT */ - EC_LED_ID_RECOVERY_HW_REINIT_LED, - /* LED to indicate sysrq debug mode. */ - EC_LED_ID_SYSRQ_DEBUG_LED, - - EC_LED_ID_COUNT -}; - -/* LED control flags */ -#define EC_LED_FLAGS_QUERY BIT(0) /* Query LED capability only */ -#define EC_LED_FLAGS_AUTO BIT(1) /* Switch LED back to automatic control */ - -enum ec_led_colors { - EC_LED_COLOR_RED = 0, - EC_LED_COLOR_GREEN, - EC_LED_COLOR_BLUE, - EC_LED_COLOR_YELLOW, - EC_LED_COLOR_WHITE, - EC_LED_COLOR_AMBER, - - EC_LED_COLOR_COUNT -}; - -struct ec_params_led_control { - uint8_t led_id; /* Which LED to control */ - uint8_t flags; /* Control flags */ - - uint8_t brightness[EC_LED_COLOR_COUNT]; -} __ec_align1; - -struct ec_response_led_control { - /* - * Available brightness value range. - * - * Range 0 means color channel not present. - * Range 1 means on/off control. - * Other values means the LED is control by PWM. - */ - uint8_t brightness_range[EC_LED_COLOR_COUNT]; -} __ec_align1; - -/*****************************************************************************/ -/* Verified boot commands */ - -/* - * Note: command code 0x29 version 0 was VBOOT_CMD in Link EVT; it may be - * reused for other purposes with version > 0. - */ - -/* Verified boot hash command */ -#define EC_CMD_VBOOT_HASH 0x002A - -struct ec_params_vboot_hash { - uint8_t cmd; /* enum ec_vboot_hash_cmd */ - uint8_t hash_type; /* enum ec_vboot_hash_type */ - uint8_t nonce_size; /* Nonce size; may be 0 */ - uint8_t reserved0; /* Reserved; set 0 */ - uint32_t offset; /* Offset in flash to hash */ - uint32_t size; /* Number of bytes to hash */ - uint8_t nonce_data[64]; /* Nonce data; ignored if nonce_size=0 */ -} __ec_align4; - -struct ec_response_vboot_hash { - uint8_t status; /* enum ec_vboot_hash_status */ - uint8_t hash_type; /* enum ec_vboot_hash_type */ - uint8_t digest_size; /* Size of hash digest in bytes */ - uint8_t reserved0; /* Ignore; will be 0 */ - uint32_t offset; /* Offset in flash which was hashed */ - uint32_t size; /* Number of bytes hashed */ - uint8_t hash_digest[64]; /* Hash digest data */ -} __ec_align4; - -enum ec_vboot_hash_cmd { - EC_VBOOT_HASH_GET = 0, /* Get current hash status */ - EC_VBOOT_HASH_ABORT = 1, /* Abort calculating current hash */ - EC_VBOOT_HASH_START = 2, /* Start computing a new hash */ - EC_VBOOT_HASH_RECALC = 3, /* Synchronously compute a new hash */ -}; - -enum ec_vboot_hash_type { - EC_VBOOT_HASH_TYPE_SHA256 = 0, /* SHA-256 */ -}; - -enum ec_vboot_hash_status { - EC_VBOOT_HASH_STATUS_NONE = 0, /* No hash (not started, or aborted) */ - EC_VBOOT_HASH_STATUS_DONE = 1, /* Finished computing a hash */ - EC_VBOOT_HASH_STATUS_BUSY = 2, /* Busy computing a hash */ -}; - -/* - * Special values for offset for EC_VBOOT_HASH_START and EC_VBOOT_HASH_RECALC. - * If one of these is specified, the EC will automatically update offset and - * size to the correct values for the specified image (RO or RW). - */ -#define EC_VBOOT_HASH_OFFSET_RO 0xfffffffe -#define EC_VBOOT_HASH_OFFSET_ACTIVE 0xfffffffd -#define EC_VBOOT_HASH_OFFSET_UPDATE 0xfffffffc - -/* - * 'RW' is vague if there are multiple RW images; we mean the active one, - * so the old constant is deprecated. - */ -#define EC_VBOOT_HASH_OFFSET_RW EC_VBOOT_HASH_OFFSET_ACTIVE - -/*****************************************************************************/ -/* - * Motion sense commands. We'll make separate structs for sub-commands with - * different input args, so that we know how much to expect. - */ -#define EC_CMD_MOTION_SENSE_CMD 0x002B - -/* Motion sense commands */ -enum motionsense_command { - /* - * Dump command returns all motion sensor data including motion sense - * module flags and individual sensor flags. - */ - MOTIONSENSE_CMD_DUMP = 0, - - /* - * Info command returns data describing the details of a given sensor, - * including enum motionsensor_type, enum motionsensor_location, and - * enum motionsensor_chip. - */ - MOTIONSENSE_CMD_INFO = 1, - - /* - * EC Rate command is a setter/getter command for the EC sampling rate - * in milliseconds. - * It is per sensor, the EC run sample task at the minimum of all - * sensors EC_RATE. - * For sensors without hardware FIFO, EC_RATE should be equals to 1/ODR - * to collect all the sensor samples. - * For sensor with hardware FIFO, EC_RATE is used as the maximal delay - * to process of all motion sensors in milliseconds. - */ - MOTIONSENSE_CMD_EC_RATE = 2, - - /* - * Sensor ODR command is a setter/getter command for the output data - * rate of a specific motion sensor in millihertz. - */ - MOTIONSENSE_CMD_SENSOR_ODR = 3, - - /* - * Sensor range command is a setter/getter command for the range of - * a specified motion sensor in +/-G's or +/- deg/s. - */ - MOTIONSENSE_CMD_SENSOR_RANGE = 4, - - /* - * Setter/getter command for the keyboard wake angle. When the lid - * angle is greater than this value, keyboard wake is disabled in S3, - * and when the lid angle goes less than this value, keyboard wake is - * enabled. Note, the lid angle measurement is an approximate, - * un-calibrated value, hence the wake angle isn't exact. - */ - MOTIONSENSE_CMD_KB_WAKE_ANGLE = 5, - - /* - * Returns a single sensor data. - */ - MOTIONSENSE_CMD_DATA = 6, - - /* - * Return sensor fifo info. - */ - MOTIONSENSE_CMD_FIFO_INFO = 7, - - /* - * Insert a flush element in the fifo and return sensor fifo info. - * The host can use that element to synchronize its operation. - */ - MOTIONSENSE_CMD_FIFO_FLUSH = 8, - - /* - * Return a portion of the fifo. - */ - MOTIONSENSE_CMD_FIFO_READ = 9, - - /* - * Perform low level calibration. - * On sensors that support it, ask to do offset calibration. - */ - MOTIONSENSE_CMD_PERFORM_CALIB = 10, - - /* - * Sensor Offset command is a setter/getter command for the offset - * used for calibration. - * The offsets can be calculated by the host, or via - * PERFORM_CALIB command. - */ - MOTIONSENSE_CMD_SENSOR_OFFSET = 11, - - /* - * List available activities for a MOTION sensor. - * Indicates if they are enabled or disabled. - */ - MOTIONSENSE_CMD_LIST_ACTIVITIES = 12, - - /* - * Activity management - * Enable/Disable activity recognition. - */ - MOTIONSENSE_CMD_SET_ACTIVITY = 13, - - /* - * Lid Angle - */ - MOTIONSENSE_CMD_LID_ANGLE = 14, - - /* - * Allow the FIFO to trigger interrupt via MKBP events. - * By default the FIFO does not send interrupt to process the FIFO - * until the AP is ready or it is coming from a wakeup sensor. - */ - MOTIONSENSE_CMD_FIFO_INT_ENABLE = 15, - - /* - * Spoof the readings of the sensors. The spoofed readings can be set - * to arbitrary values, or will lock to the last read actual values. - */ - MOTIONSENSE_CMD_SPOOF = 16, - - /* Set lid angle for tablet mode detection. */ - MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE = 17, - - /* - * Sensor Scale command is a setter/getter command for the calibration - * scale. - */ - MOTIONSENSE_CMD_SENSOR_SCALE = 18, - - /* Number of motionsense sub-commands. */ - MOTIONSENSE_NUM_CMDS -}; - -/* List of motion sensor types. */ -enum motionsensor_type { - MOTIONSENSE_TYPE_ACCEL = 0, - MOTIONSENSE_TYPE_GYRO = 1, - MOTIONSENSE_TYPE_MAG = 2, - MOTIONSENSE_TYPE_PROX = 3, - MOTIONSENSE_TYPE_LIGHT = 4, - MOTIONSENSE_TYPE_ACTIVITY = 5, - MOTIONSENSE_TYPE_BARO = 6, - MOTIONSENSE_TYPE_SYNC = 7, - MOTIONSENSE_TYPE_MAX, -}; - -/* List of motion sensor locations. */ -enum motionsensor_location { - MOTIONSENSE_LOC_BASE = 0, - MOTIONSENSE_LOC_LID = 1, - MOTIONSENSE_LOC_CAMERA = 2, - MOTIONSENSE_LOC_MAX, -}; - -/* List of motion sensor chips. */ -enum motionsensor_chip { - MOTIONSENSE_CHIP_KXCJ9 = 0, - MOTIONSENSE_CHIP_LSM6DS0 = 1, - MOTIONSENSE_CHIP_BMI160 = 2, - MOTIONSENSE_CHIP_SI1141 = 3, - MOTIONSENSE_CHIP_SI1142 = 4, - MOTIONSENSE_CHIP_SI1143 = 5, - MOTIONSENSE_CHIP_KX022 = 6, - MOTIONSENSE_CHIP_L3GD20H = 7, - MOTIONSENSE_CHIP_BMA255 = 8, - MOTIONSENSE_CHIP_BMP280 = 9, - MOTIONSENSE_CHIP_OPT3001 = 10, - MOTIONSENSE_CHIP_BH1730 = 11, - MOTIONSENSE_CHIP_GPIO = 12, - MOTIONSENSE_CHIP_LIS2DH = 13, - MOTIONSENSE_CHIP_LSM6DSM = 14, - MOTIONSENSE_CHIP_LIS2DE = 15, - MOTIONSENSE_CHIP_LIS2MDL = 16, - MOTIONSENSE_CHIP_LSM6DS3 = 17, - MOTIONSENSE_CHIP_LSM6DSO = 18, - MOTIONSENSE_CHIP_LNG2DM = 19, - MOTIONSENSE_CHIP_MAX, -}; - -/* List of orientation positions */ -enum motionsensor_orientation { - MOTIONSENSE_ORIENTATION_LANDSCAPE = 0, - MOTIONSENSE_ORIENTATION_PORTRAIT = 1, - MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_PORTRAIT = 2, - MOTIONSENSE_ORIENTATION_UPSIDE_DOWN_LANDSCAPE = 3, - MOTIONSENSE_ORIENTATION_UNKNOWN = 4, -}; - -struct ec_response_motion_sensor_data { - /* Flags for each sensor. */ - uint8_t flags; - /* Sensor number the data comes from. */ - uint8_t sensor_num; - /* Each sensor is up to 3-axis. */ - union { - int16_t data[3]; - struct __ec_todo_packed { - uint16_t reserved; - uint32_t timestamp; - }; - struct __ec_todo_unpacked { - uint8_t activity; /* motionsensor_activity */ - uint8_t state; - int16_t add_info[2]; - }; - }; -} __ec_todo_packed; - -/* Note: used in ec_response_get_next_data */ -struct ec_response_motion_sense_fifo_info { - /* Size of the fifo */ - uint16_t size; - /* Amount of space used in the fifo */ - uint16_t count; - /* Timestamp recorded in us. - * aka accurate timestamp when host event was triggered. - */ - uint32_t timestamp; - /* Total amount of vector lost */ - uint16_t total_lost; - /* Lost events since the last fifo_info, per sensors */ - uint16_t lost[0]; -} __ec_todo_packed; - -struct ec_response_motion_sense_fifo_data { - uint32_t number_data; - struct ec_response_motion_sensor_data data[0]; -} __ec_todo_packed; - -/* List supported activity recognition */ -enum motionsensor_activity { - MOTIONSENSE_ACTIVITY_RESERVED = 0, - MOTIONSENSE_ACTIVITY_SIG_MOTION = 1, - MOTIONSENSE_ACTIVITY_DOUBLE_TAP = 2, - MOTIONSENSE_ACTIVITY_ORIENTATION = 3, -}; - -struct ec_motion_sense_activity { - uint8_t sensor_num; - uint8_t activity; /* one of enum motionsensor_activity */ - uint8_t enable; /* 1: enable, 0: disable */ - uint8_t reserved; - uint16_t parameters[3]; /* activity dependent parameters */ -} __ec_todo_unpacked; - -/* Module flag masks used for the dump sub-command. */ -#define MOTIONSENSE_MODULE_FLAG_ACTIVE BIT(0) - -/* Sensor flag masks used for the dump sub-command. */ -#define MOTIONSENSE_SENSOR_FLAG_PRESENT BIT(0) - -/* - * Flush entry for synchronization. - * data contains time stamp - */ -#define MOTIONSENSE_SENSOR_FLAG_FLUSH BIT(0) -#define MOTIONSENSE_SENSOR_FLAG_TIMESTAMP BIT(1) -#define MOTIONSENSE_SENSOR_FLAG_WAKEUP BIT(2) -#define MOTIONSENSE_SENSOR_FLAG_TABLET_MODE BIT(3) -#define MOTIONSENSE_SENSOR_FLAG_ODR BIT(4) - -/* - * Send this value for the data element to only perform a read. If you - * send any other value, the EC will interpret it as data to set and will - * return the actual value set. - */ -#define EC_MOTION_SENSE_NO_VALUE -1 - -#define EC_MOTION_SENSE_INVALID_CALIB_TEMP 0x8000 - -/* MOTIONSENSE_CMD_SENSOR_OFFSET subcommand flag */ -/* Set Calibration information */ -#define MOTION_SENSE_SET_OFFSET BIT(0) - -/* Default Scale value, factor 1. */ -#define MOTION_SENSE_DEFAULT_SCALE BIT(15) - -#define LID_ANGLE_UNRELIABLE 500 - -enum motionsense_spoof_mode { - /* Disable spoof mode. */ - MOTIONSENSE_SPOOF_MODE_DISABLE = 0, - - /* Enable spoof mode, but use provided component values. */ - MOTIONSENSE_SPOOF_MODE_CUSTOM, - - /* Enable spoof mode, but use the current sensor values. */ - MOTIONSENSE_SPOOF_MODE_LOCK_CURRENT, - - /* Query the current spoof mode status for the sensor. */ - MOTIONSENSE_SPOOF_MODE_QUERY, -}; - -struct ec_params_motion_sense { - uint8_t cmd; - union { - /* Used for MOTIONSENSE_CMD_DUMP. */ - struct __ec_todo_unpacked { - /* - * Maximal number of sensor the host is expecting. - * 0 means the host is only interested in the number - * of sensors controlled by the EC. - */ - uint8_t max_sensor_count; - } dump; - - /* - * Used for MOTIONSENSE_CMD_KB_WAKE_ANGLE. - */ - struct __ec_todo_unpacked { - /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. - * kb_wake_angle: angle to wakup AP. - */ - int16_t data; - } kb_wake_angle; - - /* - * Used for MOTIONSENSE_CMD_INFO, MOTIONSENSE_CMD_DATA - * and MOTIONSENSE_CMD_PERFORM_CALIB. - */ - struct __ec_todo_unpacked { - uint8_t sensor_num; - } info, info_3, data, fifo_flush, perform_calib, - list_activities; - - /* - * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR - * and MOTIONSENSE_CMD_SENSOR_RANGE. - */ - struct __ec_todo_unpacked { - uint8_t sensor_num; - - /* Rounding flag, true for round-up, false for down. */ - uint8_t roundup; - - uint16_t reserved; - - /* Data to set or EC_MOTION_SENSE_NO_VALUE to read. */ - int32_t data; - } ec_rate, sensor_odr, sensor_range; - - /* Used for MOTIONSENSE_CMD_SENSOR_OFFSET */ - struct __ec_todo_packed { - uint8_t sensor_num; - - /* - * bit 0: If set (MOTION_SENSE_SET_OFFSET), set - * the calibration information in the EC. - * If unset, just retrieve calibration information. - */ - uint16_t flags; - - /* - * Temperature at calibration, in units of 0.01 C - * 0x8000: invalid / unknown. - * 0x0: 0C - * 0x7fff: +327.67C - */ - int16_t temp; - - /* - * Offset for calibration. - * Unit: - * Accelerometer: 1/1024 g - * Gyro: 1/1024 deg/s - * Compass: 1/16 uT - */ - int16_t offset[3]; - } sensor_offset; - - /* Used for MOTIONSENSE_CMD_SENSOR_SCALE */ - struct __ec_todo_packed { - uint8_t sensor_num; - - /* - * bit 0: If set (MOTION_SENSE_SET_OFFSET), set - * the calibration information in the EC. - * If unset, just retrieve calibration information. - */ - uint16_t flags; - - /* - * Temperature at calibration, in units of 0.01 C - * 0x8000: invalid / unknown. - * 0x0: 0C - * 0x7fff: +327.67C - */ - int16_t temp; - - /* - * Scale for calibration: - * By default scale is 1, it is encoded on 16bits: - * 1 = BIT(15) - * ~2 = 0xFFFF - * ~0 = 0. - */ - uint16_t scale[3]; - } sensor_scale; - - - /* Used for MOTIONSENSE_CMD_FIFO_INFO */ - /* (no params) */ - - /* Used for MOTIONSENSE_CMD_FIFO_READ */ - struct __ec_todo_unpacked { - /* - * Number of expected vector to return. - * EC may return less or 0 if none available. - */ - uint32_t max_data_vector; - } fifo_read; - - struct ec_motion_sense_activity set_activity; - - /* Used for MOTIONSENSE_CMD_LID_ANGLE */ - /* (no params) */ - - /* Used for MOTIONSENSE_CMD_FIFO_INT_ENABLE */ - struct __ec_todo_unpacked { - /* - * 1: enable, 0 disable fifo, - * EC_MOTION_SENSE_NO_VALUE return value. - */ - int8_t enable; - } fifo_int_enable; - - /* Used for MOTIONSENSE_CMD_SPOOF */ - struct __ec_todo_packed { - uint8_t sensor_id; - - /* See enum motionsense_spoof_mode. */ - uint8_t spoof_enable; - - /* Ignored, used for alignment. */ - uint8_t reserved; - - /* Individual component values to spoof. */ - int16_t components[3]; - } spoof; - - /* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */ - struct __ec_todo_unpacked { - /* - * Lid angle threshold for switching between tablet and - * clamshell mode. - */ - int16_t lid_angle; - - /* - * Hysteresis degree to prevent fluctuations between - * clamshell and tablet mode if lid angle keeps - * changing around the threshold. Lid motion driver will - * use lid_angle + hys_degree to trigger tablet mode and - * lid_angle - hys_degree to trigger clamshell mode. - */ - int16_t hys_degree; - } tablet_mode_threshold; - }; -} __ec_todo_packed; - -struct ec_response_motion_sense { - union { - /* Used for MOTIONSENSE_CMD_DUMP */ - struct __ec_todo_unpacked { - /* Flags representing the motion sensor module. */ - uint8_t module_flags; - - /* Number of sensors managed directly by the EC. */ - uint8_t sensor_count; - - /* - * Sensor data is truncated if response_max is too small - * for holding all the data. - */ - struct ec_response_motion_sensor_data sensor[0]; - } dump; - - /* Used for MOTIONSENSE_CMD_INFO. */ - struct __ec_todo_unpacked { - /* Should be element of enum motionsensor_type. */ - uint8_t type; - - /* Should be element of enum motionsensor_location. */ - uint8_t location; - - /* Should be element of enum motionsensor_chip. */ - uint8_t chip; - } info; - - /* Used for MOTIONSENSE_CMD_INFO version 3 */ - struct __ec_todo_unpacked { - /* Should be element of enum motionsensor_type. */ - uint8_t type; - - /* Should be element of enum motionsensor_location. */ - uint8_t location; - - /* Should be element of enum motionsensor_chip. */ - uint8_t chip; - - /* Minimum sensor sampling frequency */ - uint32_t min_frequency; - - /* Maximum sensor sampling frequency */ - uint32_t max_frequency; - - /* Max number of sensor events that could be in fifo */ - uint32_t fifo_max_event_count; - } info_3; - - /* Used for MOTIONSENSE_CMD_DATA */ - struct ec_response_motion_sensor_data data; - - /* - * Used for MOTIONSENSE_CMD_EC_RATE, MOTIONSENSE_CMD_SENSOR_ODR, - * MOTIONSENSE_CMD_SENSOR_RANGE, - * MOTIONSENSE_CMD_KB_WAKE_ANGLE, - * MOTIONSENSE_CMD_FIFO_INT_ENABLE and - * MOTIONSENSE_CMD_SPOOF. - */ - struct __ec_todo_unpacked { - /* Current value of the parameter queried. */ - int32_t ret; - } ec_rate, sensor_odr, sensor_range, kb_wake_angle, - fifo_int_enable, spoof; - - /* - * Used for MOTIONSENSE_CMD_SENSOR_OFFSET, - * PERFORM_CALIB. - */ - struct __ec_todo_unpacked { - int16_t temp; - int16_t offset[3]; - } sensor_offset, perform_calib; - - /* Used for MOTIONSENSE_CMD_SENSOR_SCALE */ - struct __ec_todo_unpacked { - int16_t temp; - uint16_t scale[3]; - } sensor_scale; - - struct ec_response_motion_sense_fifo_info fifo_info, fifo_flush; - - struct ec_response_motion_sense_fifo_data fifo_read; - - struct __ec_todo_packed { - uint16_t reserved; - uint32_t enabled; - uint32_t disabled; - } list_activities; - - /* No params for set activity */ - - /* Used for MOTIONSENSE_CMD_LID_ANGLE */ - struct __ec_todo_unpacked { - /* - * Angle between 0 and 360 degree if available, - * LID_ANGLE_UNRELIABLE otherwise. - */ - uint16_t value; - } lid_angle; - - /* Used for MOTIONSENSE_CMD_TABLET_MODE_LID_ANGLE. */ - struct __ec_todo_unpacked { - /* - * Lid angle threshold for switching between tablet and - * clamshell mode. - */ - uint16_t lid_angle; - - /* Hysteresis degree. */ - uint16_t hys_degree; - } tablet_mode_threshold; - - }; -} __ec_todo_packed; - -/*****************************************************************************/ -/* Force lid open command */ - -/* Make lid event always open */ -#define EC_CMD_FORCE_LID_OPEN 0x002C - -struct ec_params_force_lid_open { - uint8_t enabled; -} __ec_align1; - -/*****************************************************************************/ -/* Configure the behavior of the power button */ -#define EC_CMD_CONFIG_POWER_BUTTON 0x002D - -enum ec_config_power_button_flags { - /* Enable/Disable power button pulses for x86 devices */ - EC_POWER_BUTTON_ENABLE_PULSE = BIT(0), -}; - -struct ec_params_config_power_button { - /* See enum ec_config_power_button_flags */ - uint8_t flags; -} __ec_align1; - -/*****************************************************************************/ -/* USB charging control commands */ - -/* Set USB port charging mode */ -#define EC_CMD_USB_CHARGE_SET_MODE 0x0030 - -struct ec_params_usb_charge_set_mode { - uint8_t usb_port_id; - uint8_t mode:7; - uint8_t inhibit_charge:1; -} __ec_align1; - -/*****************************************************************************/ -/* Persistent storage for host */ - -/* Maximum bytes that can be read/written in a single command */ -#define EC_PSTORE_SIZE_MAX 64 - -/* Get persistent storage info */ -#define EC_CMD_PSTORE_INFO 0x0040 - -struct ec_response_pstore_info { - /* Persistent storage size, in bytes */ - uint32_t pstore_size; - /* Access size; read/write offset and size must be a multiple of this */ - uint32_t access_size; -} __ec_align4; - -/* - * Read persistent storage - * - * Response is params.size bytes of data. - */ -#define EC_CMD_PSTORE_READ 0x0041 - -struct ec_params_pstore_read { - uint32_t offset; /* Byte offset to read */ - uint32_t size; /* Size to read in bytes */ -} __ec_align4; - -/* Write persistent storage */ -#define EC_CMD_PSTORE_WRITE 0x0042 - -struct ec_params_pstore_write { - uint32_t offset; /* Byte offset to write */ - uint32_t size; /* Size to write in bytes */ - uint8_t data[EC_PSTORE_SIZE_MAX]; -} __ec_align4; - -/*****************************************************************************/ -/* Real-time clock */ - -/* RTC params and response structures */ -struct ec_params_rtc { - uint32_t time; -} __ec_align4; - -struct ec_response_rtc { - uint32_t time; -} __ec_align4; - -/* These use ec_response_rtc */ -#define EC_CMD_RTC_GET_VALUE 0x0044 -#define EC_CMD_RTC_GET_ALARM 0x0045 - -/* These all use ec_params_rtc */ -#define EC_CMD_RTC_SET_VALUE 0x0046 -#define EC_CMD_RTC_SET_ALARM 0x0047 - -/* Pass as time param to SET_ALARM to clear the current alarm */ -#define EC_RTC_ALARM_CLEAR 0 - -/*****************************************************************************/ -/* Port80 log access */ - -/* Maximum entries that can be read/written in a single command */ -#define EC_PORT80_SIZE_MAX 32 - -/* Get last port80 code from previous boot */ -#define EC_CMD_PORT80_LAST_BOOT 0x0048 -#define EC_CMD_PORT80_READ 0x0048 - -enum ec_port80_subcmd { - EC_PORT80_GET_INFO = 0, - EC_PORT80_READ_BUFFER, -}; - -struct ec_params_port80_read { - uint16_t subcmd; - union { - struct __ec_todo_unpacked { - uint32_t offset; - uint32_t num_entries; - } read_buffer; - }; -} __ec_todo_packed; - -struct ec_response_port80_read { - union { - struct __ec_todo_unpacked { - uint32_t writes; - uint32_t history_size; - uint32_t last_boot; - } get_info; - struct __ec_todo_unpacked { - uint16_t codes[EC_PORT80_SIZE_MAX]; - } data; - }; -} __ec_todo_packed; - -struct ec_response_port80_last_boot { - uint16_t code; -} __ec_align2; - -/*****************************************************************************/ -/* Temporary secure storage for host verified boot use */ - -/* Number of bytes in a vstore slot */ -#define EC_VSTORE_SLOT_SIZE 64 - -/* Maximum number of vstore slots */ -#define EC_VSTORE_SLOT_MAX 32 - -/* Get persistent storage info */ -#define EC_CMD_VSTORE_INFO 0x0049 -struct ec_response_vstore_info { - /* Indicates which slots are locked */ - uint32_t slot_locked; - /* Total number of slots available */ - uint8_t slot_count; -} __ec_align_size1; - -/* - * Read temporary secure storage - * - * Response is EC_VSTORE_SLOT_SIZE bytes of data. - */ -#define EC_CMD_VSTORE_READ 0x004A - -struct ec_params_vstore_read { - uint8_t slot; /* Slot to read from */ -} __ec_align1; - -struct ec_response_vstore_read { - uint8_t data[EC_VSTORE_SLOT_SIZE]; -} __ec_align1; - -/* - * Write temporary secure storage and lock it. - */ -#define EC_CMD_VSTORE_WRITE 0x004B - -struct ec_params_vstore_write { - uint8_t slot; /* Slot to write to */ - uint8_t data[EC_VSTORE_SLOT_SIZE]; -} __ec_align1; - -/*****************************************************************************/ -/* Thermal engine commands. Note that there are two implementations. We'll - * reuse the command number, but the data and behavior is incompatible. - * Version 0 is what originally shipped on Link. - * Version 1 separates the CPU thermal limits from the fan control. - */ - -#define EC_CMD_THERMAL_SET_THRESHOLD 0x0050 -#define EC_CMD_THERMAL_GET_THRESHOLD 0x0051 - -/* The version 0 structs are opaque. You have to know what they are for - * the get/set commands to make any sense. - */ - -/* Version 0 - set */ -struct ec_params_thermal_set_threshold { - uint8_t sensor_type; - uint8_t threshold_id; - uint16_t value; -} __ec_align2; - -/* Version 0 - get */ -struct ec_params_thermal_get_threshold { - uint8_t sensor_type; - uint8_t threshold_id; -} __ec_align1; - -struct ec_response_thermal_get_threshold { - uint16_t value; -} __ec_align2; - - -/* The version 1 structs are visible. */ -enum ec_temp_thresholds { - EC_TEMP_THRESH_WARN = 0, - EC_TEMP_THRESH_HIGH, - EC_TEMP_THRESH_HALT, - - EC_TEMP_THRESH_COUNT -}; - -/* - * Thermal configuration for one temperature sensor. Temps are in degrees K. - * Zero values will be silently ignored by the thermal task. - * - * Set 'temp_host' value allows thermal task to trigger some event with 1 degree - * hysteresis. - * For example, - * temp_host[EC_TEMP_THRESH_HIGH] = 300 K - * temp_host_release[EC_TEMP_THRESH_HIGH] = 0 K - * EC will throttle ap when temperature >= 301 K, and release throttling when - * temperature <= 299 K. - * - * Set 'temp_host_release' value allows thermal task has a custom hysteresis. - * For example, - * temp_host[EC_TEMP_THRESH_HIGH] = 300 K - * temp_host_release[EC_TEMP_THRESH_HIGH] = 295 K - * EC will throttle ap when temperature >= 301 K, and release throttling when - * temperature <= 294 K. - * - * Note that this structure is a sub-structure of - * ec_params_thermal_set_threshold_v1, but maintains its alignment there. - */ -struct ec_thermal_config { - uint32_t temp_host[EC_TEMP_THRESH_COUNT]; /* levels of hotness */ - uint32_t temp_host_release[EC_TEMP_THRESH_COUNT]; /* release levels */ - uint32_t temp_fan_off; /* no active cooling needed */ - uint32_t temp_fan_max; /* max active cooling needed */ -} __ec_align4; - -/* Version 1 - get config for one sensor. */ -struct ec_params_thermal_get_threshold_v1 { - uint32_t sensor_num; -} __ec_align4; -/* This returns a struct ec_thermal_config */ - -/* - * Version 1 - set config for one sensor. - * Use read-modify-write for best results! - */ -struct ec_params_thermal_set_threshold_v1 { - uint32_t sensor_num; - struct ec_thermal_config cfg; -} __ec_align4; -/* This returns no data */ - -/****************************************************************************/ - -/* Toggle automatic fan control */ -#define EC_CMD_THERMAL_AUTO_FAN_CTRL 0x0052 - -/* Version 1 of input params */ -struct ec_params_auto_fan_ctrl_v1 { - uint8_t fan_idx; -} __ec_align1; - -/* Get/Set TMP006 calibration data */ -#define EC_CMD_TMP006_GET_CALIBRATION 0x0053 -#define EC_CMD_TMP006_SET_CALIBRATION 0x0054 - -/* - * The original TMP006 calibration only needed four params, but now we need - * more. Since the algorithm is nothing but magic numbers anyway, we'll leave - * the params opaque. The v1 "get" response will include the algorithm number - * and how many params it requires. That way we can change the EC code without - * needing to update this file. We can also use a different algorithm on each - * sensor. - */ - -/* This is the same struct for both v0 and v1. */ -struct ec_params_tmp006_get_calibration { - uint8_t index; -} __ec_align1; - -/* Version 0 */ -struct ec_response_tmp006_get_calibration_v0 { - float s0; - float b0; - float b1; - float b2; -} __ec_align4; - -struct ec_params_tmp006_set_calibration_v0 { - uint8_t index; - uint8_t reserved[3]; - float s0; - float b0; - float b1; - float b2; -} __ec_align4; - -/* Version 1 */ -struct ec_response_tmp006_get_calibration_v1 { - uint8_t algorithm; - uint8_t num_params; - uint8_t reserved[2]; - float val[0]; -} __ec_align4; - -struct ec_params_tmp006_set_calibration_v1 { - uint8_t index; - uint8_t algorithm; - uint8_t num_params; - uint8_t reserved; - float val[0]; -} __ec_align4; - - -/* Read raw TMP006 data */ -#define EC_CMD_TMP006_GET_RAW 0x0055 - -struct ec_params_tmp006_get_raw { - uint8_t index; -} __ec_align1; - -struct ec_response_tmp006_get_raw { - int32_t t; /* In 1/100 K */ - int32_t v; /* In nV */ -} __ec_align4; - -/*****************************************************************************/ -/* MKBP - Matrix KeyBoard Protocol */ - -/* - * Read key state - * - * Returns raw data for keyboard cols; see ec_response_mkbp_info.cols for - * expected response size. - * - * NOTE: This has been superseded by EC_CMD_MKBP_GET_NEXT_EVENT. If you wish - * to obtain the instantaneous state, use EC_CMD_MKBP_INFO with the type - * EC_MKBP_INFO_CURRENT and event EC_MKBP_EVENT_KEY_MATRIX. - */ -#define EC_CMD_MKBP_STATE 0x0060 - -/* - * Provide information about various MKBP things. See enum ec_mkbp_info_type. - */ -#define EC_CMD_MKBP_INFO 0x0061 - -struct ec_response_mkbp_info { - uint32_t rows; - uint32_t cols; - /* Formerly "switches", which was 0. */ - uint8_t reserved; -} __ec_align_size1; - -struct ec_params_mkbp_info { - uint8_t info_type; - uint8_t event_type; -} __ec_align1; - -enum ec_mkbp_info_type { - /* - * Info about the keyboard matrix: number of rows and columns. - * - * Returns struct ec_response_mkbp_info. - */ - EC_MKBP_INFO_KBD = 0, - - /* - * For buttons and switches, info about which specifically are - * supported. event_type must be set to one of the values in enum - * ec_mkbp_event. - * - * For EC_MKBP_EVENT_BUTTON and EC_MKBP_EVENT_SWITCH, returns a 4 byte - * bitmask indicating which buttons or switches are present. See the - * bit inidices below. - */ - EC_MKBP_INFO_SUPPORTED = 1, - - /* - * Instantaneous state of buttons and switches. - * - * event_type must be set to one of the values in enum ec_mkbp_event. - * - * For EC_MKBP_EVENT_KEY_MATRIX, returns uint8_t key_matrix[13] - * indicating the current state of the keyboard matrix. - * - * For EC_MKBP_EVENT_HOST_EVENT, return uint32_t host_event, the raw - * event state. - * - * For EC_MKBP_EVENT_BUTTON, returns uint32_t buttons, indicating the - * state of supported buttons. - * - * For EC_MKBP_EVENT_SWITCH, returns uint32_t switches, indicating the - * state of supported switches. - */ - EC_MKBP_INFO_CURRENT = 2, -}; - -/* Simulate key press */ -#define EC_CMD_MKBP_SIMULATE_KEY 0x0062 - -struct ec_params_mkbp_simulate_key { - uint8_t col; - uint8_t row; - uint8_t pressed; -} __ec_align1; - -#define EC_CMD_GET_KEYBOARD_ID 0x0063 - -struct ec_response_keyboard_id { - uint32_t keyboard_id; -} __ec_align4; - -enum keyboard_id { - KEYBOARD_ID_UNSUPPORTED = 0, - KEYBOARD_ID_UNREADABLE = 0xffffffff, -}; - -/* Configure keyboard scanning */ -#define EC_CMD_MKBP_SET_CONFIG 0x0064 -#define EC_CMD_MKBP_GET_CONFIG 0x0065 - -/* flags */ -enum mkbp_config_flags { - EC_MKBP_FLAGS_ENABLE = 1, /* Enable keyboard scanning */ -}; - -enum mkbp_config_valid { - EC_MKBP_VALID_SCAN_PERIOD = BIT(0), - EC_MKBP_VALID_POLL_TIMEOUT = BIT(1), - EC_MKBP_VALID_MIN_POST_SCAN_DELAY = BIT(3), - EC_MKBP_VALID_OUTPUT_SETTLE = BIT(4), - EC_MKBP_VALID_DEBOUNCE_DOWN = BIT(5), - EC_MKBP_VALID_DEBOUNCE_UP = BIT(6), - EC_MKBP_VALID_FIFO_MAX_DEPTH = BIT(7), -}; - -/* - * Configuration for our key scanning algorithm. - * - * Note that this is used as a sub-structure of - * ec_{params/response}_mkbp_get_config. - */ -struct ec_mkbp_config { - uint32_t valid_mask; /* valid fields */ - uint8_t flags; /* some flags (enum mkbp_config_flags) */ - uint8_t valid_flags; /* which flags are valid */ - uint16_t scan_period_us; /* period between start of scans */ - /* revert to interrupt mode after no activity for this long */ - uint32_t poll_timeout_us; - /* - * minimum post-scan relax time. Once we finish a scan we check - * the time until we are due to start the next one. If this time is - * shorter this field, we use this instead. - */ - uint16_t min_post_scan_delay_us; - /* delay between setting up output and waiting for it to settle */ - uint16_t output_settle_us; - uint16_t debounce_down_us; /* time for debounce on key down */ - uint16_t debounce_up_us; /* time for debounce on key up */ - /* maximum depth to allow for fifo (0 = no keyscan output) */ - uint8_t fifo_max_depth; -} __ec_align_size1; - -struct ec_params_mkbp_set_config { - struct ec_mkbp_config config; -} __ec_align_size1; - -struct ec_response_mkbp_get_config { - struct ec_mkbp_config config; -} __ec_align_size1; - -/* Run the key scan emulation */ -#define EC_CMD_KEYSCAN_SEQ_CTRL 0x0066 - -enum ec_keyscan_seq_cmd { - EC_KEYSCAN_SEQ_STATUS = 0, /* Get status information */ - EC_KEYSCAN_SEQ_CLEAR = 1, /* Clear sequence */ - EC_KEYSCAN_SEQ_ADD = 2, /* Add item to sequence */ - EC_KEYSCAN_SEQ_START = 3, /* Start running sequence */ - EC_KEYSCAN_SEQ_COLLECT = 4, /* Collect sequence summary data */ -}; - -enum ec_collect_flags { - /* - * Indicates this scan was processed by the EC. Due to timing, some - * scans may be skipped. - */ - EC_KEYSCAN_SEQ_FLAG_DONE = BIT(0), -}; - -struct ec_collect_item { - uint8_t flags; /* some flags (enum ec_collect_flags) */ -} __ec_align1; - -struct ec_params_keyscan_seq_ctrl { - uint8_t cmd; /* Command to send (enum ec_keyscan_seq_cmd) */ - union { - struct __ec_align1 { - uint8_t active; /* still active */ - uint8_t num_items; /* number of items */ - /* Current item being presented */ - uint8_t cur_item; - } status; - struct __ec_todo_unpacked { - /* - * Absolute time for this scan, measured from the - * start of the sequence. - */ - uint32_t time_us; - uint8_t scan[0]; /* keyscan data */ - } add; - struct __ec_align1 { - uint8_t start_item; /* First item to return */ - uint8_t num_items; /* Number of items to return */ - } collect; - }; -} __ec_todo_packed; - -struct ec_result_keyscan_seq_ctrl { - union { - struct __ec_todo_unpacked { - uint8_t num_items; /* Number of items */ - /* Data for each item */ - struct ec_collect_item item[0]; - } collect; - }; -} __ec_todo_packed; - -/* - * Get the next pending MKBP event. - * - * Returns EC_RES_UNAVAILABLE if there is no event pending. - */ -#define EC_CMD_GET_NEXT_EVENT 0x0067 - -#define EC_MKBP_HAS_MORE_EVENTS_SHIFT 7 - -/* - * We use the most significant bit of the event type to indicate to the host - * that the EC has more MKBP events available to provide. - */ -#define EC_MKBP_HAS_MORE_EVENTS BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) - -/* The mask to apply to get the raw event type */ -#define EC_MKBP_EVENT_TYPE_MASK (BIT(EC_MKBP_HAS_MORE_EVENTS_SHIFT) - 1) - -enum ec_mkbp_event { - /* Keyboard matrix changed. The event data is the new matrix state. */ - EC_MKBP_EVENT_KEY_MATRIX = 0, - - /* New host event. The event data is 4 bytes of host event flags. */ - EC_MKBP_EVENT_HOST_EVENT = 1, - - /* New Sensor FIFO data. The event data is fifo_info structure. */ - EC_MKBP_EVENT_SENSOR_FIFO = 2, - - /* The state of the non-matrixed buttons have changed. */ - EC_MKBP_EVENT_BUTTON = 3, - - /* The state of the switches have changed. */ - EC_MKBP_EVENT_SWITCH = 4, - - /* New Fingerprint sensor event, the event data is fp_events bitmap. */ - EC_MKBP_EVENT_FINGERPRINT = 5, - - /* - * Sysrq event: send emulated sysrq. The event data is sysrq, - * corresponding to the key to be pressed. - */ - EC_MKBP_EVENT_SYSRQ = 6, - - /* - * New 64-bit host event. - * The event data is 8 bytes of host event flags. - */ - EC_MKBP_EVENT_HOST_EVENT64 = 7, - - /* Notify the AP that something happened on CEC */ - EC_MKBP_EVENT_CEC_EVENT = 8, - - /* Send an incoming CEC message to the AP */ - EC_MKBP_EVENT_CEC_MESSAGE = 9, - - /* Number of MKBP events */ - EC_MKBP_EVENT_COUNT, -}; -BUILD_ASSERT(EC_MKBP_EVENT_COUNT <= EC_MKBP_EVENT_TYPE_MASK); - -union __ec_align_offset1 ec_response_get_next_data { - uint8_t key_matrix[13]; - - /* Unaligned */ - uint32_t host_event; - uint64_t host_event64; - - struct __ec_todo_unpacked { - /* For aligning the fifo_info */ - uint8_t reserved[3]; - struct ec_response_motion_sense_fifo_info info; - } sensor_fifo; - - uint32_t buttons; - - uint32_t switches; - - uint32_t fp_events; - - uint32_t sysrq; - - /* CEC events from enum mkbp_cec_event */ - uint32_t cec_events; -}; - -union __ec_align_offset1 ec_response_get_next_data_v1 { - uint8_t key_matrix[16]; - - /* Unaligned */ - uint32_t host_event; - uint64_t host_event64; - - struct __ec_todo_unpacked { - /* For aligning the fifo_info */ - uint8_t reserved[3]; - struct ec_response_motion_sense_fifo_info info; - } sensor_fifo; - - uint32_t buttons; - - uint32_t switches; - - uint32_t fp_events; - - uint32_t sysrq; - - /* CEC events from enum mkbp_cec_event */ - uint32_t cec_events; - - uint8_t cec_message[16]; -}; -BUILD_ASSERT(sizeof(union ec_response_get_next_data_v1) == 16); - -struct ec_response_get_next_event { - uint8_t event_type; - /* Followed by event data if any */ - union ec_response_get_next_data data; -} __ec_align1; - -struct ec_response_get_next_event_v1 { - uint8_t event_type; - /* Followed by event data if any */ - union ec_response_get_next_data_v1 data; -} __ec_align1; - -/* Bit indices for buttons and switches.*/ -/* Buttons */ -#define EC_MKBP_POWER_BUTTON 0 -#define EC_MKBP_VOL_UP 1 -#define EC_MKBP_VOL_DOWN 2 -#define EC_MKBP_RECOVERY 3 - -/* Switches */ -#define EC_MKBP_LID_OPEN 0 -#define EC_MKBP_TABLET_MODE 1 -#define EC_MKBP_BASE_ATTACHED 2 - -/* Run keyboard factory test scanning */ -#define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068 - -struct ec_response_keyboard_factory_test { - uint16_t shorted; /* Keyboard pins are shorted */ -} __ec_align2; - -/* Fingerprint events in 'fp_events' for EC_MKBP_EVENT_FINGERPRINT */ -#define EC_MKBP_FP_RAW_EVENT(fp_events) ((fp_events) & 0x00FFFFFF) -#define EC_MKBP_FP_ERRCODE(fp_events) ((fp_events) & 0x0000000F) -#define EC_MKBP_FP_ENROLL_PROGRESS_OFFSET 4 -#define EC_MKBP_FP_ENROLL_PROGRESS(fpe) (((fpe) & 0x00000FF0) \ - >> EC_MKBP_FP_ENROLL_PROGRESS_OFFSET) -#define EC_MKBP_FP_MATCH_IDX_OFFSET 12 -#define EC_MKBP_FP_MATCH_IDX_MASK 0x0000F000 -#define EC_MKBP_FP_MATCH_IDX(fpe) (((fpe) & EC_MKBP_FP_MATCH_IDX_MASK) \ - >> EC_MKBP_FP_MATCH_IDX_OFFSET) -#define EC_MKBP_FP_ENROLL BIT(27) -#define EC_MKBP_FP_MATCH BIT(28) -#define EC_MKBP_FP_FINGER_DOWN BIT(29) -#define EC_MKBP_FP_FINGER_UP BIT(30) -#define EC_MKBP_FP_IMAGE_READY BIT(31) -/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_ENROLL is set */ -#define EC_MKBP_FP_ERR_ENROLL_OK 0 -#define EC_MKBP_FP_ERR_ENROLL_LOW_QUALITY 1 -#define EC_MKBP_FP_ERR_ENROLL_IMMOBILE 2 -#define EC_MKBP_FP_ERR_ENROLL_LOW_COVERAGE 3 -#define EC_MKBP_FP_ERR_ENROLL_INTERNAL 5 -/* Can be used to detect if image was usable for enrollment or not. */ -#define EC_MKBP_FP_ERR_ENROLL_PROBLEM_MASK 1 -/* code given by EC_MKBP_FP_ERRCODE() when EC_MKBP_FP_MATCH is set */ -#define EC_MKBP_FP_ERR_MATCH_NO 0 -#define EC_MKBP_FP_ERR_MATCH_NO_INTERNAL 6 -#define EC_MKBP_FP_ERR_MATCH_NO_TEMPLATES 7 -#define EC_MKBP_FP_ERR_MATCH_NO_LOW_QUALITY 2 -#define EC_MKBP_FP_ERR_MATCH_NO_LOW_COVERAGE 4 -#define EC_MKBP_FP_ERR_MATCH_YES 1 -#define EC_MKBP_FP_ERR_MATCH_YES_UPDATED 3 -#define EC_MKBP_FP_ERR_MATCH_YES_UPDATE_FAILED 5 - - -/*****************************************************************************/ -/* Temperature sensor commands */ - -/* Read temperature sensor info */ -#define EC_CMD_TEMP_SENSOR_GET_INFO 0x0070 - -struct ec_params_temp_sensor_get_info { - uint8_t id; -} __ec_align1; - -struct ec_response_temp_sensor_get_info { - char sensor_name[32]; - uint8_t sensor_type; -} __ec_align1; - -/*****************************************************************************/ - -/* - * Note: host commands 0x80 - 0x87 are reserved to avoid conflict with ACPI - * commands accidentally sent to the wrong interface. See the ACPI section - * below. - */ - -/*****************************************************************************/ -/* Host event commands */ - - -/* Obsolete. New implementation should use EC_CMD_HOST_EVENT instead */ -/* - * Host event mask params and response structures, shared by all of the host - * event commands below. - */ -struct ec_params_host_event_mask { - uint32_t mask; -} __ec_align4; - -struct ec_response_host_event_mask { - uint32_t mask; -} __ec_align4; - -/* These all use ec_response_host_event_mask */ -#define EC_CMD_HOST_EVENT_GET_B 0x0087 -#define EC_CMD_HOST_EVENT_GET_SMI_MASK 0x0088 -#define EC_CMD_HOST_EVENT_GET_SCI_MASK 0x0089 -#define EC_CMD_HOST_EVENT_GET_WAKE_MASK 0x008D - -/* These all use ec_params_host_event_mask */ -#define EC_CMD_HOST_EVENT_SET_SMI_MASK 0x008A -#define EC_CMD_HOST_EVENT_SET_SCI_MASK 0x008B -#define EC_CMD_HOST_EVENT_CLEAR 0x008C -#define EC_CMD_HOST_EVENT_SET_WAKE_MASK 0x008E -#define EC_CMD_HOST_EVENT_CLEAR_B 0x008F - -/* - * Unified host event programming interface - Should be used by newer versions - * of BIOS/OS to program host events and masks - */ - -struct ec_params_host_event { - - /* Action requested by host - one of enum ec_host_event_action. */ - uint8_t action; - - /* - * Mask type that the host requested the action on - one of - * enum ec_host_event_mask_type. - */ - uint8_t mask_type; - - /* Set to 0, ignore on read */ - uint16_t reserved; - - /* Value to be used in case of set operations. */ - uint64_t value; -} __ec_align4; - -/* - * Response structure returned by EC_CMD_HOST_EVENT. - * Update the value on a GET request. Set to 0 on GET/CLEAR - */ - -struct ec_response_host_event { - - /* Mask value in case of get operation */ - uint64_t value; -} __ec_align4; - -enum ec_host_event_action { - /* - * params.value is ignored. Value of mask_type populated - * in response.value - */ - EC_HOST_EVENT_GET, - - /* Bits in params.value are set */ - EC_HOST_EVENT_SET, - - /* Bits in params.value are cleared */ - EC_HOST_EVENT_CLEAR, -}; - -enum ec_host_event_mask_type { - - /* Main host event copy */ - EC_HOST_EVENT_MAIN, - - /* Copy B of host events */ - EC_HOST_EVENT_B, - - /* SCI Mask */ - EC_HOST_EVENT_SCI_MASK, - - /* SMI Mask */ - EC_HOST_EVENT_SMI_MASK, - - /* Mask of events that should be always reported in hostevents */ - EC_HOST_EVENT_ALWAYS_REPORT_MASK, - - /* Active wake mask */ - EC_HOST_EVENT_ACTIVE_WAKE_MASK, - - /* Lazy wake mask for S0ix */ - EC_HOST_EVENT_LAZY_WAKE_MASK_S0IX, - - /* Lazy wake mask for S3 */ - EC_HOST_EVENT_LAZY_WAKE_MASK_S3, - - /* Lazy wake mask for S5 */ - EC_HOST_EVENT_LAZY_WAKE_MASK_S5, -}; - -#define EC_CMD_HOST_EVENT 0x00A4 - -/*****************************************************************************/ -/* Switch commands */ - -/* Enable/disable LCD backlight */ -#define EC_CMD_SWITCH_ENABLE_BKLIGHT 0x0090 - -struct ec_params_switch_enable_backlight { - uint8_t enabled; -} __ec_align1; - -/* Enable/disable WLAN/Bluetooth */ -#define EC_CMD_SWITCH_ENABLE_WIRELESS 0x0091 -#define EC_VER_SWITCH_ENABLE_WIRELESS 1 - -/* Version 0 params; no response */ -struct ec_params_switch_enable_wireless_v0 { - uint8_t enabled; -} __ec_align1; - -/* Version 1 params */ -struct ec_params_switch_enable_wireless_v1 { - /* Flags to enable now */ - uint8_t now_flags; - - /* Which flags to copy from now_flags */ - uint8_t now_mask; - - /* - * Flags to leave enabled in S3, if they're on at the S0->S3 - * transition. (Other flags will be disabled by the S0->S3 - * transition.) - */ - uint8_t suspend_flags; - - /* Which flags to copy from suspend_flags */ - uint8_t suspend_mask; -} __ec_align1; - -/* Version 1 response */ -struct ec_response_switch_enable_wireless_v1 { - /* Flags to enable now */ - uint8_t now_flags; - - /* Flags to leave enabled in S3 */ - uint8_t suspend_flags; -} __ec_align1; - -/*****************************************************************************/ -/* GPIO commands. Only available on EC if write protect has been disabled. */ - -/* Set GPIO output value */ -#define EC_CMD_GPIO_SET 0x0092 - -struct ec_params_gpio_set { - char name[32]; - uint8_t val; -} __ec_align1; - -/* Get GPIO value */ -#define EC_CMD_GPIO_GET 0x0093 - -/* Version 0 of input params and response */ -struct ec_params_gpio_get { - char name[32]; -} __ec_align1; - -struct ec_response_gpio_get { - uint8_t val; -} __ec_align1; - -/* Version 1 of input params and response */ -struct ec_params_gpio_get_v1 { - uint8_t subcmd; - union { - struct __ec_align1 { - char name[32]; - } get_value_by_name; - struct __ec_align1 { - uint8_t index; - } get_info; - }; -} __ec_align1; - -struct ec_response_gpio_get_v1 { - union { - struct __ec_align1 { - uint8_t val; - } get_value_by_name, get_count; - struct __ec_todo_unpacked { - uint8_t val; - char name[32]; - uint32_t flags; - } get_info; - }; -} __ec_todo_packed; - -enum gpio_get_subcmd { - EC_GPIO_GET_BY_NAME = 0, - EC_GPIO_GET_COUNT = 1, - EC_GPIO_GET_INFO = 2, -}; - -/*****************************************************************************/ -/* I2C commands. Only available when flash write protect is unlocked. */ - -/* - * CAUTION: These commands are deprecated, and are not supported anymore in EC - * builds >= 8398.0.0 (see crosbug.com/p/23570). - * - * Use EC_CMD_I2C_PASSTHRU instead. - */ - -/* Read I2C bus */ -#define EC_CMD_I2C_READ 0x0094 - -struct ec_params_i2c_read { - uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ - uint8_t read_size; /* Either 8 or 16. */ - uint8_t port; - uint8_t offset; -} __ec_align_size1; - -struct ec_response_i2c_read { - uint16_t data; -} __ec_align2; - -/* Write I2C bus */ -#define EC_CMD_I2C_WRITE 0x0095 - -struct ec_params_i2c_write { - uint16_t data; - uint16_t addr; /* 8-bit address (7-bit shifted << 1) */ - uint8_t write_size; /* Either 8 or 16. */ - uint8_t port; - uint8_t offset; -} __ec_align_size1; - -/*****************************************************************************/ -/* Charge state commands. Only available when flash write protect unlocked. */ - -/* Force charge state machine to stop charging the battery or force it to - * discharge the battery. - */ -#define EC_CMD_CHARGE_CONTROL 0x0096 -#define EC_VER_CHARGE_CONTROL 1 - -enum ec_charge_control_mode { - CHARGE_CONTROL_NORMAL = 0, - CHARGE_CONTROL_IDLE, - CHARGE_CONTROL_DISCHARGE, -}; - -struct ec_params_charge_control { - uint32_t mode; /* enum charge_control_mode */ -} __ec_align4; - -/*****************************************************************************/ - -/* Snapshot console output buffer for use by EC_CMD_CONSOLE_READ. */ -#define EC_CMD_CONSOLE_SNAPSHOT 0x0097 - -/* - * Read data from the saved snapshot. If the subcmd parameter is - * CONSOLE_READ_NEXT, this will return data starting from the beginning of - * the latest snapshot. If it is CONSOLE_READ_RECENT, it will start from the - * end of the previous snapshot. - * - * The params are only looked at in version >= 1 of this command. Prior - * versions will just default to CONSOLE_READ_NEXT behavior. - * - * Response is null-terminated string. Empty string, if there is no more - * remaining output. - */ -#define EC_CMD_CONSOLE_READ 0x0098 - -enum ec_console_read_subcmd { - CONSOLE_READ_NEXT = 0, - CONSOLE_READ_RECENT -}; - -struct ec_params_console_read_v1 { - uint8_t subcmd; /* enum ec_console_read_subcmd */ -} __ec_align1; - -/*****************************************************************************/ - -/* - * Cut off battery power immediately or after the host has shut down. - * - * return EC_RES_INVALID_COMMAND if unsupported by a board/battery. - * EC_RES_SUCCESS if the command was successful. - * EC_RES_ERROR if the cut off command failed. - */ -#define EC_CMD_BATTERY_CUT_OFF 0x0099 - -#define EC_BATTERY_CUTOFF_FLAG_AT_SHUTDOWN BIT(0) - -struct ec_params_battery_cutoff { - uint8_t flags; -} __ec_align1; - -/*****************************************************************************/ -/* USB port mux control. */ - -/* - * Switch USB mux or return to automatic switching. - */ -#define EC_CMD_USB_MUX 0x009A - -struct ec_params_usb_mux { - uint8_t mux; -} __ec_align1; - -/*****************************************************************************/ -/* LDOs / FETs control. */ - -enum ec_ldo_state { - EC_LDO_STATE_OFF = 0, /* the LDO / FET is shut down */ - EC_LDO_STATE_ON = 1, /* the LDO / FET is ON / providing power */ -}; - -/* - * Switch on/off a LDO. - */ -#define EC_CMD_LDO_SET 0x009B - -struct ec_params_ldo_set { - uint8_t index; - uint8_t state; -} __ec_align1; - -/* - * Get LDO state. - */ -#define EC_CMD_LDO_GET 0x009C - -struct ec_params_ldo_get { - uint8_t index; -} __ec_align1; - -struct ec_response_ldo_get { - uint8_t state; -} __ec_align1; - -/*****************************************************************************/ -/* Power info. */ - -/* - * Get power info. - */ -#define EC_CMD_POWER_INFO 0x009D - -struct ec_response_power_info { - uint32_t usb_dev_type; - uint16_t voltage_ac; - uint16_t voltage_system; - uint16_t current_system; - uint16_t usb_current_limit; -} __ec_align4; - -/*****************************************************************************/ -/* I2C passthru command */ - -#define EC_CMD_I2C_PASSTHRU 0x009E - -/* Read data; if not present, message is a write */ -#define EC_I2C_FLAG_READ BIT(15) - -/* Mask for address */ -#define EC_I2C_ADDR_MASK 0x3ff - -#define EC_I2C_STATUS_NAK BIT(0) /* Transfer was not acknowledged */ -#define EC_I2C_STATUS_TIMEOUT BIT(1) /* Timeout during transfer */ - -/* Any error */ -#define EC_I2C_STATUS_ERROR (EC_I2C_STATUS_NAK | EC_I2C_STATUS_TIMEOUT) - -struct ec_params_i2c_passthru_msg { - uint16_t addr_flags; /* I2C slave address (7 or 10 bits) and flags */ - uint16_t len; /* Number of bytes to read or write */ -} __ec_align2; - -struct ec_params_i2c_passthru { - uint8_t port; /* I2C port number */ - uint8_t num_msgs; /* Number of messages */ - struct ec_params_i2c_passthru_msg msg[]; - /* Data to write for all messages is concatenated here */ -} __ec_align2; - -struct ec_response_i2c_passthru { - uint8_t i2c_status; /* Status flags (EC_I2C_STATUS_...) */ - uint8_t num_msgs; /* Number of messages processed */ - uint8_t data[]; /* Data read by messages concatenated here */ -} __ec_align1; - -/*****************************************************************************/ -/* Power button hang detect */ - -#define EC_CMD_HANG_DETECT 0x009F - -/* Reasons to start hang detection timer */ -/* Power button pressed */ -#define EC_HANG_START_ON_POWER_PRESS BIT(0) - -/* Lid closed */ -#define EC_HANG_START_ON_LID_CLOSE BIT(1) - - /* Lid opened */ -#define EC_HANG_START_ON_LID_OPEN BIT(2) - -/* Start of AP S3->S0 transition (booting or resuming from suspend) */ -#define EC_HANG_START_ON_RESUME BIT(3) - -/* Reasons to cancel hang detection */ - -/* Power button released */ -#define EC_HANG_STOP_ON_POWER_RELEASE BIT(8) - -/* Any host command from AP received */ -#define EC_HANG_STOP_ON_HOST_COMMAND BIT(9) - -/* Stop on end of AP S0->S3 transition (suspending or shutting down) */ -#define EC_HANG_STOP_ON_SUSPEND BIT(10) - -/* - * If this flag is set, all the other fields are ignored, and the hang detect - * timer is started. This provides the AP a way to start the hang timer - * without reconfiguring any of the other hang detect settings. Note that - * you must previously have configured the timeouts. - */ -#define EC_HANG_START_NOW BIT(30) - -/* - * If this flag is set, all the other fields are ignored (including - * EC_HANG_START_NOW). This provides the AP a way to stop the hang timer - * without reconfiguring any of the other hang detect settings. - */ -#define EC_HANG_STOP_NOW BIT(31) - -struct ec_params_hang_detect { - /* Flags; see EC_HANG_* */ - uint32_t flags; - - /* Timeout in msec before generating host event, if enabled */ - uint16_t host_event_timeout_msec; - - /* Timeout in msec before generating warm reboot, if enabled */ - uint16_t warm_reboot_timeout_msec; -} __ec_align4; - -/*****************************************************************************/ -/* Commands for battery charging */ - -/* - * This is the single catch-all host command to exchange data regarding the - * charge state machine (v2 and up). - */ -#define EC_CMD_CHARGE_STATE 0x00A0 - -/* Subcommands for this host command */ -enum charge_state_command { - CHARGE_STATE_CMD_GET_STATE, - CHARGE_STATE_CMD_GET_PARAM, - CHARGE_STATE_CMD_SET_PARAM, - CHARGE_STATE_NUM_CMDS -}; - -/* - * Known param numbers are defined here. Ranges are reserved for board-specific - * params, which are handled by the particular implementations. - */ -enum charge_state_params { - CS_PARAM_CHG_VOLTAGE, /* charger voltage limit */ - CS_PARAM_CHG_CURRENT, /* charger current limit */ - CS_PARAM_CHG_INPUT_CURRENT, /* charger input current limit */ - CS_PARAM_CHG_STATUS, /* charger-specific status */ - CS_PARAM_CHG_OPTION, /* charger-specific options */ - CS_PARAM_LIMIT_POWER, /* - * Check if power is limited due to - * low battery and / or a weak external - * charger. READ ONLY. - */ - /* How many so far? */ - CS_NUM_BASE_PARAMS, - - /* Range for CONFIG_CHARGER_PROFILE_OVERRIDE params */ - CS_PARAM_CUSTOM_PROFILE_MIN = 0x10000, - CS_PARAM_CUSTOM_PROFILE_MAX = 0x1ffff, - - /* Range for CONFIG_CHARGE_STATE_DEBUG params */ - CS_PARAM_DEBUG_MIN = 0x20000, - CS_PARAM_DEBUG_CTL_MODE = 0x20000, - CS_PARAM_DEBUG_MANUAL_MODE, - CS_PARAM_DEBUG_SEEMS_DEAD, - CS_PARAM_DEBUG_SEEMS_DISCONNECTED, - CS_PARAM_DEBUG_BATT_REMOVED, - CS_PARAM_DEBUG_MANUAL_CURRENT, - CS_PARAM_DEBUG_MANUAL_VOLTAGE, - CS_PARAM_DEBUG_MAX = 0x2ffff, - - /* Other custom param ranges go here... */ -}; - -struct ec_params_charge_state { - uint8_t cmd; /* enum charge_state_command */ - union { - /* get_state has no args */ - - struct __ec_todo_unpacked { - uint32_t param; /* enum charge_state_param */ - } get_param; - - struct __ec_todo_unpacked { - uint32_t param; /* param to set */ - uint32_t value; /* value to set */ - } set_param; - }; -} __ec_todo_packed; - -struct ec_response_charge_state { - union { - struct __ec_align4 { - int ac; - int chg_voltage; - int chg_current; - int chg_input_current; - int batt_state_of_charge; - } get_state; - - struct __ec_align4 { - uint32_t value; - } get_param; - - /* set_param returns no args */ - }; -} __ec_align4; - - -/* - * Set maximum battery charging current. - */ -#define EC_CMD_CHARGE_CURRENT_LIMIT 0x00A1 - -struct ec_params_current_limit { - uint32_t limit; /* in mA */ -} __ec_align4; - -/* - * Set maximum external voltage / current. - */ -#define EC_CMD_EXTERNAL_POWER_LIMIT 0x00A2 - -/* Command v0 is used only on Spring and is obsolete + unsupported */ -struct ec_params_external_power_limit_v1 { - uint16_t current_lim; /* in mA, or EC_POWER_LIMIT_NONE to clear limit */ - uint16_t voltage_lim; /* in mV, or EC_POWER_LIMIT_NONE to clear limit */ -} __ec_align2; - -#define EC_POWER_LIMIT_NONE 0xffff - -/* - * Set maximum voltage & current of a dedicated charge port - */ -#define EC_CMD_OVERRIDE_DEDICATED_CHARGER_LIMIT 0x00A3 - -struct ec_params_dedicated_charger_limit { - uint16_t current_lim; /* in mA */ - uint16_t voltage_lim; /* in mV */ -} __ec_align2; - -/*****************************************************************************/ -/* Hibernate/Deep Sleep Commands */ - -/* Set the delay before going into hibernation. */ -#define EC_CMD_HIBERNATION_DELAY 0x00A8 - -struct ec_params_hibernation_delay { - /* - * Seconds to wait in G3 before hibernate. Pass in 0 to read the - * current settings without changing them. - */ - uint32_t seconds; -} __ec_align4; - -struct ec_response_hibernation_delay { - /* - * The current time in seconds in which the system has been in the G3 - * state. This value is reset if the EC transitions out of G3. - */ - uint32_t time_g3; - - /* - * The current time remaining in seconds until the EC should hibernate. - * This value is also reset if the EC transitions out of G3. - */ - uint32_t time_remaining; - - /* - * The current time in seconds that the EC should wait in G3 before - * hibernating. - */ - uint32_t hibernate_delay; -} __ec_align4; - -/* Inform the EC when entering a sleep state */ -#define EC_CMD_HOST_SLEEP_EVENT 0x00A9 - -enum host_sleep_event { - HOST_SLEEP_EVENT_S3_SUSPEND = 1, - HOST_SLEEP_EVENT_S3_RESUME = 2, - HOST_SLEEP_EVENT_S0IX_SUSPEND = 3, - HOST_SLEEP_EVENT_S0IX_RESUME = 4, - /* S3 suspend with additional enabled wake sources */ - HOST_SLEEP_EVENT_S3_WAKEABLE_SUSPEND = 5, -}; - -struct ec_params_host_sleep_event { - uint8_t sleep_event; -} __ec_align1; - -/* - * Use a default timeout value (CONFIG_SLEEP_TIMEOUT_MS) for detecting sleep - * transition failures - */ -#define EC_HOST_SLEEP_TIMEOUT_DEFAULT 0 - -/* Disable timeout detection for this sleep transition */ -#define EC_HOST_SLEEP_TIMEOUT_INFINITE 0xFFFF - -struct ec_params_host_sleep_event_v1 { - /* The type of sleep being entered or exited. */ - uint8_t sleep_event; - - /* Padding */ - uint8_t reserved; - union { - /* Parameters that apply for suspend messages. */ - struct { - /* - * The timeout in milliseconds between when this message - * is received and when the EC will declare sleep - * transition failure if the sleep signal is not - * asserted. - */ - uint16_t sleep_timeout_ms; - } suspend_params; - - /* No parameters for non-suspend messages. */ - }; -} __ec_align2; - -/* A timeout occurred when this bit is set */ -#define EC_HOST_RESUME_SLEEP_TIMEOUT 0x80000000 - -/* - * The mask defining which bits correspond to the number of sleep transitions, - * as well as the maximum number of suspend line transitions that will be - * reported back to the host. - */ -#define EC_HOST_RESUME_SLEEP_TRANSITIONS_MASK 0x7FFFFFFF - -struct ec_response_host_sleep_event_v1 { - union { - /* Response fields that apply for resume messages. */ - struct { - /* - * The number of sleep power signal transitions that - * occurred since the suspend message. The high bit - * indicates a timeout occurred. - */ - uint32_t sleep_transitions; - } resume_response; - - /* No response fields for non-resume messages. */ - }; -} __ec_align4; - -/*****************************************************************************/ -/* Device events */ -#define EC_CMD_DEVICE_EVENT 0x00AA - -enum ec_device_event { - EC_DEVICE_EVENT_TRACKPAD, - EC_DEVICE_EVENT_DSP, - EC_DEVICE_EVENT_WIFI, -}; - -enum ec_device_event_param { - /* Get and clear pending device events */ - EC_DEVICE_EVENT_PARAM_GET_CURRENT_EVENTS, - /* Get device event mask */ - EC_DEVICE_EVENT_PARAM_GET_ENABLED_EVENTS, - /* Set device event mask */ - EC_DEVICE_EVENT_PARAM_SET_ENABLED_EVENTS, -}; - -#define EC_DEVICE_EVENT_MASK(event_code) BIT(event_code % 32) - -struct ec_params_device_event { - uint32_t event_mask; - uint8_t param; -} __ec_align_size1; - -struct ec_response_device_event { - uint32_t event_mask; -} __ec_align4; - -/*****************************************************************************/ -/* Smart battery pass-through */ - -/* Get / Set 16-bit smart battery registers */ -#define EC_CMD_SB_READ_WORD 0x00B0 -#define EC_CMD_SB_WRITE_WORD 0x00B1 - -/* Get / Set string smart battery parameters - * formatted as SMBUS "block". - */ -#define EC_CMD_SB_READ_BLOCK 0x00B2 -#define EC_CMD_SB_WRITE_BLOCK 0x00B3 - -struct ec_params_sb_rd { - uint8_t reg; -} __ec_align1; - -struct ec_response_sb_rd_word { - uint16_t value; -} __ec_align2; - -struct ec_params_sb_wr_word { - uint8_t reg; - uint16_t value; -} __ec_align1; - -struct ec_response_sb_rd_block { - uint8_t data[32]; -} __ec_align1; - -struct ec_params_sb_wr_block { - uint8_t reg; - uint16_t data[32]; -} __ec_align1; - -/*****************************************************************************/ -/* Battery vendor parameters - * - * Get or set vendor-specific parameters in the battery. Implementations may - * differ between boards or batteries. On a set operation, the response - * contains the actual value set, which may be rounded or clipped from the - * requested value. - */ - -#define EC_CMD_BATTERY_VENDOR_PARAM 0x00B4 - -enum ec_battery_vendor_param_mode { - BATTERY_VENDOR_PARAM_MODE_GET = 0, - BATTERY_VENDOR_PARAM_MODE_SET, -}; - -struct ec_params_battery_vendor_param { - uint32_t param; - uint32_t value; - uint8_t mode; -} __ec_align_size1; - -struct ec_response_battery_vendor_param { - uint32_t value; -} __ec_align4; - -/*****************************************************************************/ -/* - * Smart Battery Firmware Update Commands - */ -#define EC_CMD_SB_FW_UPDATE 0x00B5 - -enum ec_sb_fw_update_subcmd { - EC_SB_FW_UPDATE_PREPARE = 0x0, - EC_SB_FW_UPDATE_INFO = 0x1, /*query sb info */ - EC_SB_FW_UPDATE_BEGIN = 0x2, /*check if protected */ - EC_SB_FW_UPDATE_WRITE = 0x3, /*check if protected */ - EC_SB_FW_UPDATE_END = 0x4, - EC_SB_FW_UPDATE_STATUS = 0x5, - EC_SB_FW_UPDATE_PROTECT = 0x6, - EC_SB_FW_UPDATE_MAX = 0x7, -}; - -#define SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE 32 -#define SB_FW_UPDATE_CMD_STATUS_SIZE 2 -#define SB_FW_UPDATE_CMD_INFO_SIZE 8 - -struct ec_sb_fw_update_header { - uint16_t subcmd; /* enum ec_sb_fw_update_subcmd */ - uint16_t fw_id; /* firmware id */ -} __ec_align4; - -struct ec_params_sb_fw_update { - struct ec_sb_fw_update_header hdr; - union { - /* EC_SB_FW_UPDATE_PREPARE = 0x0 */ - /* EC_SB_FW_UPDATE_INFO = 0x1 */ - /* EC_SB_FW_UPDATE_BEGIN = 0x2 */ - /* EC_SB_FW_UPDATE_END = 0x4 */ - /* EC_SB_FW_UPDATE_STATUS = 0x5 */ - /* EC_SB_FW_UPDATE_PROTECT = 0x6 */ - /* Those have no args */ - - /* EC_SB_FW_UPDATE_WRITE = 0x3 */ - struct __ec_align4 { - uint8_t data[SB_FW_UPDATE_CMD_WRITE_BLOCK_SIZE]; - } write; - }; -} __ec_align4; - -struct ec_response_sb_fw_update { - union { - /* EC_SB_FW_UPDATE_INFO = 0x1 */ - struct __ec_align1 { - uint8_t data[SB_FW_UPDATE_CMD_INFO_SIZE]; - } info; - - /* EC_SB_FW_UPDATE_STATUS = 0x5 */ - struct __ec_align1 { - uint8_t data[SB_FW_UPDATE_CMD_STATUS_SIZE]; - } status; - }; -} __ec_align1; - -/* - * Entering Verified Boot Mode Command - * Default mode is VBOOT_MODE_NORMAL if EC did not receive this command. - * Valid Modes are: normal, developer, and recovery. - */ -#define EC_CMD_ENTERING_MODE 0x00B6 - -struct ec_params_entering_mode { - int vboot_mode; -} __ec_align4; - -#define VBOOT_MODE_NORMAL 0 -#define VBOOT_MODE_DEVELOPER 1 -#define VBOOT_MODE_RECOVERY 2 - -/*****************************************************************************/ -/* - * I2C passthru protection command: Protects I2C tunnels against access on - * certain addresses (board-specific). - */ -#define EC_CMD_I2C_PASSTHRU_PROTECT 0x00B7 - -enum ec_i2c_passthru_protect_subcmd { - EC_CMD_I2C_PASSTHRU_PROTECT_STATUS = 0x0, - EC_CMD_I2C_PASSTHRU_PROTECT_ENABLE = 0x1, -}; - -struct ec_params_i2c_passthru_protect { - uint8_t subcmd; - uint8_t port; /* I2C port number */ -} __ec_align1; - -struct ec_response_i2c_passthru_protect { - uint8_t status; /* Status flags (0: unlocked, 1: locked) */ -} __ec_align1; - - -/*****************************************************************************/ -/* - * HDMI CEC commands - * - * These commands are for sending and receiving message via HDMI CEC - */ - -#define MAX_CEC_MSG_LEN 16 - -/* CEC message from the AP to be written on the CEC bus */ -#define EC_CMD_CEC_WRITE_MSG 0x00B8 - -/** - * struct ec_params_cec_write - Message to write to the CEC bus - * @msg: message content to write to the CEC bus - */ -struct ec_params_cec_write { - uint8_t msg[MAX_CEC_MSG_LEN]; -} __ec_align1; - -/* Set various CEC parameters */ -#define EC_CMD_CEC_SET 0x00BA - -/** - * struct ec_params_cec_set - CEC parameters set - * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS - * @val: in case cmd is CEC_CMD_ENABLE, this field can be 0 to disable CEC - * or 1 to enable CEC functionality, in case cmd is - * CEC_CMD_LOGICAL_ADDRESS, this field encodes the requested logical - * address between 0 and 15 or 0xff to unregister - */ -struct ec_params_cec_set { - uint8_t cmd; /* enum cec_command */ - uint8_t val; -} __ec_align1; - -/* Read various CEC parameters */ -#define EC_CMD_CEC_GET 0x00BB - -/** - * struct ec_params_cec_get - CEC parameters get - * @cmd: parameter type, can be CEC_CMD_ENABLE or CEC_CMD_LOGICAL_ADDRESS - */ -struct ec_params_cec_get { - uint8_t cmd; /* enum cec_command */ -} __ec_align1; - -/** - * struct ec_response_cec_get - CEC parameters get response - * @val: in case cmd was CEC_CMD_ENABLE, this field will 0 if CEC is - * disabled or 1 if CEC functionality is enabled, - * in case cmd was CEC_CMD_LOGICAL_ADDRESS, this will encode the - * configured logical address between 0 and 15 or 0xff if unregistered - */ -struct ec_response_cec_get { - uint8_t val; -} __ec_align1; - -/* CEC parameters command */ -enum cec_command { - /* CEC reading, writing and events enable */ - CEC_CMD_ENABLE, - /* CEC logical address */ - CEC_CMD_LOGICAL_ADDRESS, -}; - -/* Events from CEC to AP */ -enum mkbp_cec_event { - /* Outgoing message was acknowledged by a follower */ - EC_MKBP_CEC_SEND_OK = BIT(0), - /* Outgoing message was not acknowledged */ - EC_MKBP_CEC_SEND_FAILED = BIT(1), -}; - -/*****************************************************************************/ - -/* Commands for I2S recording on audio codec. */ - -#define EC_CMD_CODEC_I2S 0x00BC -#define EC_WOV_I2S_SAMPLE_RATE 48000 - -enum ec_codec_i2s_subcmd { - EC_CODEC_SET_SAMPLE_DEPTH = 0x0, - EC_CODEC_SET_GAIN = 0x1, - EC_CODEC_GET_GAIN = 0x2, - EC_CODEC_I2S_ENABLE = 0x3, - EC_CODEC_I2S_SET_CONFIG = 0x4, - EC_CODEC_I2S_SET_TDM_CONFIG = 0x5, - EC_CODEC_I2S_SET_BCLK = 0x6, - EC_CODEC_I2S_SUBCMD_COUNT = 0x7, -}; - -enum ec_sample_depth_value { - EC_CODEC_SAMPLE_DEPTH_16 = 0, - EC_CODEC_SAMPLE_DEPTH_24 = 1, -}; - -enum ec_i2s_config { - EC_DAI_FMT_I2S = 0, - EC_DAI_FMT_RIGHT_J = 1, - EC_DAI_FMT_LEFT_J = 2, - EC_DAI_FMT_PCM_A = 3, - EC_DAI_FMT_PCM_B = 4, - EC_DAI_FMT_PCM_TDM = 5, -}; - -/* - * For subcommand EC_CODEC_GET_GAIN. - */ -struct __ec_align1 ec_codec_i2s_gain { - uint8_t left; - uint8_t right; -}; - -struct __ec_todo_unpacked ec_param_codec_i2s_tdm { - int16_t ch0_delay; /* 0 to 496 */ - int16_t ch1_delay; /* -1 to 496 */ - uint8_t adjacent_to_ch0; - uint8_t adjacent_to_ch1; -}; - -struct __ec_todo_packed ec_param_codec_i2s { - /* enum ec_codec_i2s_subcmd */ - uint8_t cmd; - union { - /* - * EC_CODEC_SET_SAMPLE_DEPTH - * Value should be one of ec_sample_depth_value. - */ - uint8_t depth; - - /* - * EC_CODEC_SET_GAIN - * Value should be 0~43 for both channels. - */ - struct ec_codec_i2s_gain gain; - - /* - * EC_CODEC_I2S_ENABLE - * 1 to enable, 0 to disable. - */ - uint8_t i2s_enable; - - /* - * EC_CODEC_I2S_SET_CONFIG - * Value should be one of ec_i2s_config. - */ - uint8_t i2s_config; - - /* - * EC_CODEC_I2S_SET_TDM_CONFIG - * Value should be one of ec_i2s_config. - */ - struct ec_param_codec_i2s_tdm tdm_param; - - /* - * EC_CODEC_I2S_SET_BCLK - */ - uint32_t bclk; - }; -}; - - -/*****************************************************************************/ -/* System commands */ - -/* - * TODO(crosbug.com/p/23747): This is a confusing name, since it doesn't - * necessarily reboot the EC. Rename to "image" or something similar? - */ -#define EC_CMD_REBOOT_EC 0x00D2 - -/* Command */ -enum ec_reboot_cmd { - EC_REBOOT_CANCEL = 0, /* Cancel a pending reboot */ - EC_REBOOT_JUMP_RO = 1, /* Jump to RO without rebooting */ - EC_REBOOT_JUMP_RW = 2, /* Jump to active RW without rebooting */ - /* (command 3 was jump to RW-B) */ - EC_REBOOT_COLD = 4, /* Cold-reboot */ - EC_REBOOT_DISABLE_JUMP = 5, /* Disable jump until next reboot */ - EC_REBOOT_HIBERNATE = 6, /* Hibernate EC */ - EC_REBOOT_HIBERNATE_CLEAR_AP_OFF = 7, /* and clears AP_OFF flag */ -}; - -/* Flags for ec_params_reboot_ec.reboot_flags */ -#define EC_REBOOT_FLAG_RESERVED0 BIT(0) /* Was recovery request */ -#define EC_REBOOT_FLAG_ON_AP_SHUTDOWN BIT(1) /* Reboot after AP shutdown */ -#define EC_REBOOT_FLAG_SWITCH_RW_SLOT BIT(2) /* Switch RW slot */ - -struct ec_params_reboot_ec { - uint8_t cmd; /* enum ec_reboot_cmd */ - uint8_t flags; /* See EC_REBOOT_FLAG_* */ -} __ec_align1; - -/* - * Get information on last EC panic. - * - * Returns variable-length platform-dependent panic information. See panic.h - * for details. - */ -#define EC_CMD_GET_PANIC_INFO 0x00D3 - -/*****************************************************************************/ -/* - * Special commands - * - * These do not follow the normal rules for commands. See each command for - * details. - */ - -/* - * Reboot NOW - * - * This command will work even when the EC LPC interface is busy, because the - * reboot command is processed at interrupt level. Note that when the EC - * reboots, the host will reboot too, so there is no response to this command. - * - * Use EC_CMD_REBOOT_EC to reboot the EC more politely. - */ -#define EC_CMD_REBOOT 0x00D1 /* Think "die" */ - -/* - * Resend last response (not supported on LPC). - * - * Returns EC_RES_UNAVAILABLE if there is no response available - for example, - * there was no previous command, or the previous command's response was too - * big to save. - */ -#define EC_CMD_RESEND_RESPONSE 0x00DB - -/* - * This header byte on a command indicate version 0. Any header byte less - * than this means that we are talking to an old EC which doesn't support - * versioning. In that case, we assume version 0. - * - * Header bytes greater than this indicate a later version. For example, - * EC_CMD_VERSION0 + 1 means we are using version 1. - * - * The old EC interface must not use commands 0xdc or higher. - */ -#define EC_CMD_VERSION0 0x00DC - -/*****************************************************************************/ -/* - * PD commands - * - * These commands are for PD MCU communication. - */ - -/* EC to PD MCU exchange status command */ -#define EC_CMD_PD_EXCHANGE_STATUS 0x0100 -#define EC_VER_PD_EXCHANGE_STATUS 2 - -enum pd_charge_state { - PD_CHARGE_NO_CHANGE = 0, /* Don't change charge state */ - PD_CHARGE_NONE, /* No charging allowed */ - PD_CHARGE_5V, /* 5V charging only */ - PD_CHARGE_MAX /* Charge at max voltage */ -}; - -/* Status of EC being sent to PD */ -#define EC_STATUS_HIBERNATING BIT(0) - -struct ec_params_pd_status { - uint8_t status; /* EC status */ - int8_t batt_soc; /* battery state of charge */ - uint8_t charge_state; /* charging state (from enum pd_charge_state) */ -} __ec_align1; - -/* Status of PD being sent back to EC */ -#define PD_STATUS_HOST_EVENT BIT(0) /* Forward host event to AP */ -#define PD_STATUS_IN_RW BIT(1) /* Running RW image */ -#define PD_STATUS_JUMPED_TO_IMAGE BIT(2) /* Current image was jumped to */ -#define PD_STATUS_TCPC_ALERT_0 BIT(3) /* Alert active in port 0 TCPC */ -#define PD_STATUS_TCPC_ALERT_1 BIT(4) /* Alert active in port 1 TCPC */ -#define PD_STATUS_TCPC_ALERT_2 BIT(5) /* Alert active in port 2 TCPC */ -#define PD_STATUS_TCPC_ALERT_3 BIT(6) /* Alert active in port 3 TCPC */ -#define PD_STATUS_EC_INT_ACTIVE (PD_STATUS_TCPC_ALERT_0 | \ - PD_STATUS_TCPC_ALERT_1 | \ - PD_STATUS_HOST_EVENT) -struct ec_response_pd_status { - uint32_t curr_lim_ma; /* input current limit */ - uint16_t status; /* PD MCU status */ - int8_t active_charge_port; /* active charging port */ -} __ec_align_size1; - -/* AP to PD MCU host event status command, cleared on read */ -#define EC_CMD_PD_HOST_EVENT_STATUS 0x0104 - -/* PD MCU host event status bits */ -#define PD_EVENT_UPDATE_DEVICE BIT(0) -#define PD_EVENT_POWER_CHANGE BIT(1) -#define PD_EVENT_IDENTITY_RECEIVED BIT(2) -#define PD_EVENT_DATA_SWAP BIT(3) -struct ec_response_host_event_status { - uint32_t status; /* PD MCU host event status */ -} __ec_align4; - -/* Set USB type-C port role and muxes */ -#define EC_CMD_USB_PD_CONTROL 0x0101 - -enum usb_pd_control_role { - USB_PD_CTRL_ROLE_NO_CHANGE = 0, - USB_PD_CTRL_ROLE_TOGGLE_ON = 1, /* == AUTO */ - USB_PD_CTRL_ROLE_TOGGLE_OFF = 2, - USB_PD_CTRL_ROLE_FORCE_SINK = 3, - USB_PD_CTRL_ROLE_FORCE_SOURCE = 4, - USB_PD_CTRL_ROLE_FREEZE = 5, - USB_PD_CTRL_ROLE_COUNT -}; - -enum usb_pd_control_mux { - USB_PD_CTRL_MUX_NO_CHANGE = 0, - USB_PD_CTRL_MUX_NONE = 1, - USB_PD_CTRL_MUX_USB = 2, - USB_PD_CTRL_MUX_DP = 3, - USB_PD_CTRL_MUX_DOCK = 4, - USB_PD_CTRL_MUX_AUTO = 5, - USB_PD_CTRL_MUX_COUNT -}; - -enum usb_pd_control_swap { - USB_PD_CTRL_SWAP_NONE = 0, - USB_PD_CTRL_SWAP_DATA = 1, - USB_PD_CTRL_SWAP_POWER = 2, - USB_PD_CTRL_SWAP_VCONN = 3, - USB_PD_CTRL_SWAP_COUNT -}; - -struct ec_params_usb_pd_control { - uint8_t port; - uint8_t role; - uint8_t mux; - uint8_t swap; -} __ec_align1; - -#define PD_CTRL_RESP_ENABLED_COMMS BIT(0) /* Communication enabled */ -#define PD_CTRL_RESP_ENABLED_CONNECTED BIT(1) /* Device connected */ -#define PD_CTRL_RESP_ENABLED_PD_CAPABLE BIT(2) /* Partner is PD capable */ - -#define PD_CTRL_RESP_ROLE_POWER BIT(0) /* 0=SNK/1=SRC */ -#define PD_CTRL_RESP_ROLE_DATA BIT(1) /* 0=UFP/1=DFP */ -#define PD_CTRL_RESP_ROLE_VCONN BIT(2) /* Vconn status */ -#define PD_CTRL_RESP_ROLE_DR_POWER BIT(3) /* Partner is dualrole power */ -#define PD_CTRL_RESP_ROLE_DR_DATA BIT(4) /* Partner is dualrole data */ -#define PD_CTRL_RESP_ROLE_USB_COMM BIT(5) /* Partner USB comm capable */ -#define PD_CTRL_RESP_ROLE_EXT_POWERED BIT(6) /* Partner externally powerd */ - -struct ec_response_usb_pd_control { - uint8_t enabled; - uint8_t role; - uint8_t polarity; - uint8_t state; -} __ec_align1; - -struct ec_response_usb_pd_control_v1 { - uint8_t enabled; - uint8_t role; - uint8_t polarity; - char state[32]; -} __ec_align1; - -/* Values representing usbc PD CC state */ -#define USBC_PD_CC_NONE 0 /* No accessory connected */ -#define USBC_PD_CC_NO_UFP 1 /* No UFP accessory connected */ -#define USBC_PD_CC_AUDIO_ACC 2 /* Audio accessory connected */ -#define USBC_PD_CC_DEBUG_ACC 3 /* Debug accessory connected */ -#define USBC_PD_CC_UFP_ATTACHED 4 /* UFP attached to usbc */ -#define USBC_PD_CC_DFP_ATTACHED 5 /* DPF attached to usbc */ - -struct ec_response_usb_pd_control_v2 { - uint8_t enabled; - uint8_t role; - uint8_t polarity; - char state[32]; - uint8_t cc_state; /* USBC_PD_CC_*Encoded cc state */ - uint8_t dp_mode; /* Current DP pin mode (MODE_DP_PIN_[A-E]) */ - /* CL:1500994 Current cable type */ - uint8_t reserved_cable_type; -} __ec_align1; - -#define EC_CMD_USB_PD_PORTS 0x0102 - -/* Maximum number of PD ports on a device, num_ports will be <= this */ -#define EC_USB_PD_MAX_PORTS 8 - -struct ec_response_usb_pd_ports { - uint8_t num_ports; -} __ec_align1; - -#define EC_CMD_USB_PD_POWER_INFO 0x0103 - -#define PD_POWER_CHARGING_PORT 0xff -struct ec_params_usb_pd_power_info { - uint8_t port; -} __ec_align1; - -enum usb_chg_type { - USB_CHG_TYPE_NONE, - USB_CHG_TYPE_PD, - USB_CHG_TYPE_C, - USB_CHG_TYPE_PROPRIETARY, - USB_CHG_TYPE_BC12_DCP, - USB_CHG_TYPE_BC12_CDP, - USB_CHG_TYPE_BC12_SDP, - USB_CHG_TYPE_OTHER, - USB_CHG_TYPE_VBUS, - USB_CHG_TYPE_UNKNOWN, - USB_CHG_TYPE_DEDICATED, -}; -enum usb_power_roles { - USB_PD_PORT_POWER_DISCONNECTED, - USB_PD_PORT_POWER_SOURCE, - USB_PD_PORT_POWER_SINK, - USB_PD_PORT_POWER_SINK_NOT_CHARGING, -}; - -struct usb_chg_measures { - uint16_t voltage_max; - uint16_t voltage_now; - uint16_t current_max; - uint16_t current_lim; -} __ec_align2; - -struct ec_response_usb_pd_power_info { - uint8_t role; - uint8_t type; - uint8_t dualrole; - uint8_t reserved1; - struct usb_chg_measures meas; - uint32_t max_power; -} __ec_align4; - - -/* - * This command will return the number of USB PD charge port + the number - * of dedicated port present. - * EC_CMD_USB_PD_PORTS does NOT include the dedicated ports - */ -#define EC_CMD_CHARGE_PORT_COUNT 0x0105 -struct ec_response_charge_port_count { - uint8_t port_count; -} __ec_align1; - -/* Write USB-PD device FW */ -#define EC_CMD_USB_PD_FW_UPDATE 0x0110 - -enum usb_pd_fw_update_cmds { - USB_PD_FW_REBOOT, - USB_PD_FW_FLASH_ERASE, - USB_PD_FW_FLASH_WRITE, - USB_PD_FW_ERASE_SIG, -}; - -struct ec_params_usb_pd_fw_update { - uint16_t dev_id; - uint8_t cmd; - uint8_t port; - uint32_t size; /* Size to write in bytes */ - /* Followed by data to write */ -} __ec_align4; - -/* Write USB-PD Accessory RW_HASH table entry */ -#define EC_CMD_USB_PD_RW_HASH_ENTRY 0x0111 -/* RW hash is first 20 bytes of SHA-256 of RW section */ -#define PD_RW_HASH_SIZE 20 -struct ec_params_usb_pd_rw_hash_entry { - uint16_t dev_id; - uint8_t dev_rw_hash[PD_RW_HASH_SIZE]; - uint8_t reserved; /* - * For alignment of current_image - * TODO(rspangler) but it's not aligned! - * Should have been reserved[2]. - */ - uint32_t current_image; /* One of ec_current_image */ -} __ec_align1; - -/* Read USB-PD Accessory info */ -#define EC_CMD_USB_PD_DEV_INFO 0x0112 - -struct ec_params_usb_pd_info_request { - uint8_t port; -} __ec_align1; - -/* Read USB-PD Device discovery info */ -#define EC_CMD_USB_PD_DISCOVERY 0x0113 -struct ec_params_usb_pd_discovery_entry { - uint16_t vid; /* USB-IF VID */ - uint16_t pid; /* USB-IF PID */ - uint8_t ptype; /* product type (hub,periph,cable,ama) */ -} __ec_align_size1; - -/* Override default charge behavior */ -#define EC_CMD_PD_CHARGE_PORT_OVERRIDE 0x0114 - -/* Negative port parameters have special meaning */ -enum usb_pd_override_ports { - OVERRIDE_DONT_CHARGE = -2, - OVERRIDE_OFF = -1, - /* [0, CONFIG_USB_PD_PORT_COUNT): Port# */ -}; - -struct ec_params_charge_port_override { - int16_t override_port; /* Override port# */ -} __ec_align2; - -/* - * Read (and delete) one entry of PD event log. - * TODO(crbug.com/751742): Make this host command more generic to accommodate - * future non-PD logs that use the same internal EC event_log. - */ -#define EC_CMD_PD_GET_LOG_ENTRY 0x0115 - -struct ec_response_pd_log { - uint32_t timestamp; /* relative timestamp in milliseconds */ - uint8_t type; /* event type : see PD_EVENT_xx below */ - uint8_t size_port; /* [7:5] port number [4:0] payload size in bytes */ - uint16_t data; /* type-defined data payload */ - uint8_t payload[0]; /* optional additional data payload: 0..16 bytes */ -} __ec_align4; - -/* The timestamp is the microsecond counter shifted to get about a ms. */ -#define PD_LOG_TIMESTAMP_SHIFT 10 /* 1 LSB = 1024us */ - -#define PD_LOG_SIZE_MASK 0x1f -#define PD_LOG_PORT_MASK 0xe0 -#define PD_LOG_PORT_SHIFT 5 -#define PD_LOG_PORT_SIZE(port, size) (((port) << PD_LOG_PORT_SHIFT) | \ - ((size) & PD_LOG_SIZE_MASK)) -#define PD_LOG_PORT(size_port) ((size_port) >> PD_LOG_PORT_SHIFT) -#define PD_LOG_SIZE(size_port) ((size_port) & PD_LOG_SIZE_MASK) - -/* PD event log : entry types */ -/* PD MCU events */ -#define PD_EVENT_MCU_BASE 0x00 -#define PD_EVENT_MCU_CHARGE (PD_EVENT_MCU_BASE+0) -#define PD_EVENT_MCU_CONNECT (PD_EVENT_MCU_BASE+1) -/* Reserved for custom board event */ -#define PD_EVENT_MCU_BOARD_CUSTOM (PD_EVENT_MCU_BASE+2) -/* PD generic accessory events */ -#define PD_EVENT_ACC_BASE 0x20 -#define PD_EVENT_ACC_RW_FAIL (PD_EVENT_ACC_BASE+0) -#define PD_EVENT_ACC_RW_ERASE (PD_EVENT_ACC_BASE+1) -/* PD power supply events */ -#define PD_EVENT_PS_BASE 0x40 -#define PD_EVENT_PS_FAULT (PD_EVENT_PS_BASE+0) -/* PD video dongles events */ -#define PD_EVENT_VIDEO_BASE 0x60 -#define PD_EVENT_VIDEO_DP_MODE (PD_EVENT_VIDEO_BASE+0) -#define PD_EVENT_VIDEO_CODEC (PD_EVENT_VIDEO_BASE+1) -/* Returned in the "type" field, when there is no entry available */ -#define PD_EVENT_NO_ENTRY 0xff - -/* - * PD_EVENT_MCU_CHARGE event definition : - * the payload is "struct usb_chg_measures" - * the data field contains the port state flags as defined below : - */ -/* Port partner is a dual role device */ -#define CHARGE_FLAGS_DUAL_ROLE BIT(15) -/* Port is the pending override port */ -#define CHARGE_FLAGS_DELAYED_OVERRIDE BIT(14) -/* Port is the override port */ -#define CHARGE_FLAGS_OVERRIDE BIT(13) -/* Charger type */ -#define CHARGE_FLAGS_TYPE_SHIFT 3 -#define CHARGE_FLAGS_TYPE_MASK (0xf << CHARGE_FLAGS_TYPE_SHIFT) -/* Power delivery role */ -#define CHARGE_FLAGS_ROLE_MASK (7 << 0) - -/* - * PD_EVENT_PS_FAULT data field flags definition : - */ -#define PS_FAULT_OCP 1 -#define PS_FAULT_FAST_OCP 2 -#define PS_FAULT_OVP 3 -#define PS_FAULT_DISCH 4 - -/* - * PD_EVENT_VIDEO_CODEC payload is "struct mcdp_info". - */ -struct mcdp_version { - uint8_t major; - uint8_t minor; - uint16_t build; -} __ec_align4; - -struct mcdp_info { - uint8_t family[2]; - uint8_t chipid[2]; - struct mcdp_version irom; - struct mcdp_version fw; -} __ec_align4; - -/* struct mcdp_info field decoding */ -#define MCDP_CHIPID(chipid) ((chipid[0] << 8) | chipid[1]) -#define MCDP_FAMILY(family) ((family[0] << 8) | family[1]) - -/* Get/Set USB-PD Alternate mode info */ -#define EC_CMD_USB_PD_GET_AMODE 0x0116 -struct ec_params_usb_pd_get_mode_request { - uint16_t svid_idx; /* SVID index to get */ - uint8_t port; /* port */ -} __ec_align_size1; - -struct ec_params_usb_pd_get_mode_response { - uint16_t svid; /* SVID */ - uint16_t opos; /* Object Position */ - uint32_t vdo[6]; /* Mode VDOs */ -} __ec_align4; - -#define EC_CMD_USB_PD_SET_AMODE 0x0117 - -enum pd_mode_cmd { - PD_EXIT_MODE = 0, - PD_ENTER_MODE = 1, - /* Not a command. Do NOT remove. */ - PD_MODE_CMD_COUNT, -}; - -struct ec_params_usb_pd_set_mode_request { - uint32_t cmd; /* enum pd_mode_cmd */ - uint16_t svid; /* SVID to set */ - uint8_t opos; /* Object Position */ - uint8_t port; /* port */ -} __ec_align4; - -/* Ask the PD MCU to record a log of a requested type */ -#define EC_CMD_PD_WRITE_LOG_ENTRY 0x0118 - -struct ec_params_pd_write_log_entry { - uint8_t type; /* event type : see PD_EVENT_xx above */ - uint8_t port; /* port#, or 0 for events unrelated to a given port */ -} __ec_align1; - - -/* Control USB-PD chip */ -#define EC_CMD_PD_CONTROL 0x0119 - -enum ec_pd_control_cmd { - PD_SUSPEND = 0, /* Suspend the PD chip (EC: stop talking to PD) */ - PD_RESUME, /* Resume the PD chip (EC: start talking to PD) */ - PD_RESET, /* Force reset the PD chip */ - PD_CONTROL_DISABLE, /* Disable further calls to this command */ - PD_CHIP_ON, /* Power on the PD chip */ -}; - -struct ec_params_pd_control { - uint8_t chip; /* chip id */ - uint8_t subcmd; -} __ec_align1; - -/* Get info about USB-C SS muxes */ -#define EC_CMD_USB_PD_MUX_INFO 0x011A - -struct ec_params_usb_pd_mux_info { - uint8_t port; /* USB-C port number */ -} __ec_align1; - -/* Flags representing mux state */ -#define USB_PD_MUX_USB_ENABLED BIT(0) /* USB connected */ -#define USB_PD_MUX_DP_ENABLED BIT(1) /* DP connected */ -#define USB_PD_MUX_POLARITY_INVERTED BIT(2) /* CC line Polarity inverted */ -#define USB_PD_MUX_HPD_IRQ BIT(3) /* HPD IRQ is asserted */ -#define USB_PD_MUX_HPD_LVL BIT(4) /* HPD level is asserted */ - -struct ec_response_usb_pd_mux_info { - uint8_t flags; /* USB_PD_MUX_*-encoded USB mux state */ -} __ec_align1; - -#define EC_CMD_PD_CHIP_INFO 0x011B - -struct ec_params_pd_chip_info { - uint8_t port; /* USB-C port number */ - uint8_t renew; /* Force renewal */ -} __ec_align1; - -struct ec_response_pd_chip_info { - uint16_t vendor_id; - uint16_t product_id; - uint16_t device_id; - union { - uint8_t fw_version_string[8]; - uint64_t fw_version_number; - }; -} __ec_align2; - -struct ec_response_pd_chip_info_v1 { - uint16_t vendor_id; - uint16_t product_id; - uint16_t device_id; - union { - uint8_t fw_version_string[8]; - uint64_t fw_version_number; - }; - union { - uint8_t min_req_fw_version_string[8]; - uint64_t min_req_fw_version_number; - }; -} __ec_align2; - -/* Run RW signature verification and get status */ -#define EC_CMD_RWSIG_CHECK_STATUS 0x011C - -struct ec_response_rwsig_check_status { - uint32_t status; -} __ec_align4; - -/* For controlling RWSIG task */ -#define EC_CMD_RWSIG_ACTION 0x011D - -enum rwsig_action { - RWSIG_ACTION_ABORT = 0, /* Abort RWSIG and prevent jumping */ - RWSIG_ACTION_CONTINUE = 1, /* Jump to RW immediately */ -}; - -struct ec_params_rwsig_action { - uint32_t action; -} __ec_align4; - -/* Run verification on a slot */ -#define EC_CMD_EFS_VERIFY 0x011E - -struct ec_params_efs_verify { - uint8_t region; /* enum ec_flash_region */ -} __ec_align1; - -/* - * Retrieve info from Cros Board Info store. Response is based on the data - * type. Integers return a uint32. Strings return a string, using the response - * size to determine how big it is. - */ -#define EC_CMD_GET_CROS_BOARD_INFO 0x011F -/* - * Write info into Cros Board Info on EEPROM. Write fails if the board has - * hardware write-protect enabled. - */ -#define EC_CMD_SET_CROS_BOARD_INFO 0x0120 - -enum cbi_data_tag { - CBI_TAG_BOARD_VERSION = 0, /* uint32_t or smaller */ - CBI_TAG_OEM_ID = 1, /* uint32_t or smaller */ - CBI_TAG_SKU_ID = 2, /* uint32_t or smaller */ - CBI_TAG_DRAM_PART_NUM = 3, /* variable length ascii, nul terminated. */ - CBI_TAG_OEM_NAME = 4, /* variable length ascii, nul terminated. */ - CBI_TAG_MODEL_ID = 5, /* uint32_t or smaller */ - CBI_TAG_COUNT, -}; - -/* - * Flags to control read operation - * - * RELOAD: Invalidate cache and read data from EEPROM. Useful to verify - * write was successful without reboot. - */ -#define CBI_GET_RELOAD BIT(0) - -struct ec_params_get_cbi { - uint32_t tag; /* enum cbi_data_tag */ - uint32_t flag; /* CBI_GET_* */ -} __ec_align4; - -/* - * Flags to control write behavior. - * - * NO_SYNC: Makes EC update data in RAM but skip writing to EEPROM. It's - * useful when writing multiple fields in a row. - * INIT: Need to be set when creating a new CBI from scratch. All fields - * will be initialized to zero first. - */ -#define CBI_SET_NO_SYNC BIT(0) -#define CBI_SET_INIT BIT(1) - -struct ec_params_set_cbi { - uint32_t tag; /* enum cbi_data_tag */ - uint32_t flag; /* CBI_SET_* */ - uint32_t size; /* Data size */ - uint8_t data[]; /* For string and raw data */ -} __ec_align1; - -/* - * Information about resets of the AP by the EC and the EC's own uptime. - */ -#define EC_CMD_GET_UPTIME_INFO 0x0121 - -struct ec_response_uptime_info { - /* - * Number of milliseconds since the last EC boot. Sysjump resets - * typically do not restart the EC's time_since_boot epoch. - * - * WARNING: The EC's sense of time is much less accurate than the AP's - * sense of time, in both phase and frequency. This timebase is similar - * to CLOCK_MONOTONIC_RAW, but with 1% or more frequency error. - */ - uint32_t time_since_ec_boot_ms; - - /* - * Number of times the AP was reset by the EC since the last EC boot. - * Note that the AP may be held in reset by the EC during the initial - * boot sequence, such that the very first AP boot may count as more - * than one here. - */ - uint32_t ap_resets_since_ec_boot; - - /* - * The set of flags which describe the EC's most recent reset. See - * include/system.h RESET_FLAG_* for details. - */ - uint32_t ec_reset_flags; - - /* Empty log entries have both the cause and timestamp set to zero. */ - struct ap_reset_log_entry { - /* - * See include/chipset.h: enum chipset_{reset,shutdown}_reason - * for details. - */ - uint16_t reset_cause; - - /* Reserved for protocol growth. */ - uint16_t reserved; - - /* - * The time of the reset's assertion, in milliseconds since the - * last EC boot, in the same epoch as time_since_ec_boot_ms. - * Set to zero if the log entry is empty. - */ - uint32_t reset_time_ms; - } recent_ap_reset[4]; -} __ec_align4; - -/* - * Add entropy to the device secret (stored in the rollback region). - * - * Depending on the chip, the operation may take a long time (e.g. to erase - * flash), so the commands are asynchronous. - */ -#define EC_CMD_ADD_ENTROPY 0x0122 - -enum add_entropy_action { - /* Add entropy to the current secret. */ - ADD_ENTROPY_ASYNC = 0, - /* - * Add entropy, and also make sure that the previous secret is erased. - * (this can be implemented by adding entropy multiple times until - * all rolback blocks have been overwritten). - */ - ADD_ENTROPY_RESET_ASYNC = 1, - /* Read back result from the previous operation. */ - ADD_ENTROPY_GET_RESULT = 2, -}; - -struct ec_params_rollback_add_entropy { - uint8_t action; -} __ec_align1; - -/* - * Perform a single read of a given ADC channel. - */ -#define EC_CMD_ADC_READ 0x0123 - -struct ec_params_adc_read { - uint8_t adc_channel; -} __ec_align1; - -struct ec_response_adc_read { - int32_t adc_value; -} __ec_align4; - -/* - * Read back rollback info - */ -#define EC_CMD_ROLLBACK_INFO 0x0124 - -struct ec_response_rollback_info { - int32_t id; /* Incrementing number to indicate which region to use. */ - int32_t rollback_min_version; - int32_t rw_rollback_version; -} __ec_align4; - - -/* Issue AP reset */ -#define EC_CMD_AP_RESET 0x0125 - -/*****************************************************************************/ -/* The command range 0x200-0x2FF is reserved for Rotor. */ - -/*****************************************************************************/ -/* - * Reserve a range of host commands for the CR51 firmware. - */ -#define EC_CMD_CR51_BASE 0x0300 -#define EC_CMD_CR51_LAST 0x03FF - -/*****************************************************************************/ -/* Fingerprint MCU commands: range 0x0400-0x040x */ - -/* Fingerprint SPI sensor passthru command: prototyping ONLY */ -#define EC_CMD_FP_PASSTHRU 0x0400 - -#define EC_FP_FLAG_NOT_COMPLETE 0x1 - -struct ec_params_fp_passthru { - uint16_t len; /* Number of bytes to write then read */ - uint16_t flags; /* EC_FP_FLAG_xxx */ - uint8_t data[]; /* Data to send */ -} __ec_align2; - -/* Configure the Fingerprint MCU behavior */ -#define EC_CMD_FP_MODE 0x0402 - -/* Put the sensor in its lowest power mode */ -#define FP_MODE_DEEPSLEEP BIT(0) -/* Wait to see a finger on the sensor */ -#define FP_MODE_FINGER_DOWN BIT(1) -/* Poll until the finger has left the sensor */ -#define FP_MODE_FINGER_UP BIT(2) -/* Capture the current finger image */ -#define FP_MODE_CAPTURE BIT(3) -/* Finger enrollment session on-going */ -#define FP_MODE_ENROLL_SESSION BIT(4) -/* Enroll the current finger image */ -#define FP_MODE_ENROLL_IMAGE BIT(5) -/* Try to match the current finger image */ -#define FP_MODE_MATCH BIT(6) -/* Reset and re-initialize the sensor. */ -#define FP_MODE_RESET_SENSOR BIT(7) -/* special value: don't change anything just read back current mode */ -#define FP_MODE_DONT_CHANGE BIT(31) - -#define FP_VALID_MODES (FP_MODE_DEEPSLEEP | \ - FP_MODE_FINGER_DOWN | \ - FP_MODE_FINGER_UP | \ - FP_MODE_CAPTURE | \ - FP_MODE_ENROLL_SESSION | \ - FP_MODE_ENROLL_IMAGE | \ - FP_MODE_MATCH | \ - FP_MODE_RESET_SENSOR | \ - FP_MODE_DONT_CHANGE) - -/* Capture types defined in bits [30..28] */ -#define FP_MODE_CAPTURE_TYPE_SHIFT 28 -#define FP_MODE_CAPTURE_TYPE_MASK (0x7 << FP_MODE_CAPTURE_TYPE_SHIFT) -/* - * This enum must remain ordered, if you add new values you must ensure that - * FP_CAPTURE_TYPE_MAX is still the last one. - */ -enum fp_capture_type { - /* Full blown vendor-defined capture (produces 'frame_size' bytes) */ - FP_CAPTURE_VENDOR_FORMAT = 0, - /* Simple raw image capture (produces width x height x bpp bits) */ - FP_CAPTURE_SIMPLE_IMAGE = 1, - /* Self test pattern (e.g. checkerboard) */ - FP_CAPTURE_PATTERN0 = 2, - /* Self test pattern (e.g. inverted checkerboard) */ - FP_CAPTURE_PATTERN1 = 3, - /* Capture for Quality test with fixed contrast */ - FP_CAPTURE_QUALITY_TEST = 4, - /* Capture for pixel reset value test */ - FP_CAPTURE_RESET_TEST = 5, - FP_CAPTURE_TYPE_MAX, -}; -/* Extracts the capture type from the sensor 'mode' word */ -#define FP_CAPTURE_TYPE(mode) (((mode) & FP_MODE_CAPTURE_TYPE_MASK) \ - >> FP_MODE_CAPTURE_TYPE_SHIFT) - -struct ec_params_fp_mode { - uint32_t mode; /* as defined by FP_MODE_ constants */ -} __ec_align4; - -struct ec_response_fp_mode { - uint32_t mode; /* as defined by FP_MODE_ constants */ -} __ec_align4; - -/* Retrieve Fingerprint sensor information */ -#define EC_CMD_FP_INFO 0x0403 - -/* Number of dead pixels detected on the last maintenance */ -#define FP_ERROR_DEAD_PIXELS(errors) ((errors) & 0x3FF) -/* Unknown number of dead pixels detected on the last maintenance */ -#define FP_ERROR_DEAD_PIXELS_UNKNOWN (0x3FF) -/* No interrupt from the sensor */ -#define FP_ERROR_NO_IRQ BIT(12) -/* SPI communication error */ -#define FP_ERROR_SPI_COMM BIT(13) -/* Invalid sensor Hardware ID */ -#define FP_ERROR_BAD_HWID BIT(14) -/* Sensor initialization failed */ -#define FP_ERROR_INIT_FAIL BIT(15) - -struct ec_response_fp_info_v0 { - /* Sensor identification */ - uint32_t vendor_id; - uint32_t product_id; - uint32_t model_id; - uint32_t version; - /* Image frame characteristics */ - uint32_t frame_size; - uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ - uint16_t width; - uint16_t height; - uint16_t bpp; - uint16_t errors; /* see FP_ERROR_ flags above */ -} __ec_align4; - -struct ec_response_fp_info { - /* Sensor identification */ - uint32_t vendor_id; - uint32_t product_id; - uint32_t model_id; - uint32_t version; - /* Image frame characteristics */ - uint32_t frame_size; - uint32_t pixel_format; /* using V4L2_PIX_FMT_ */ - uint16_t width; - uint16_t height; - uint16_t bpp; - uint16_t errors; /* see FP_ERROR_ flags above */ - /* Template/finger current information */ - uint32_t template_size; /* max template size in bytes */ - uint16_t template_max; /* maximum number of fingers/templates */ - uint16_t template_valid; /* number of valid fingers/templates */ - uint32_t template_dirty; /* bitmap of templates with MCU side changes */ - uint32_t template_version; /* version of the template format */ -} __ec_align4; - -/* Get the last captured finger frame or a template content */ -#define EC_CMD_FP_FRAME 0x0404 - -/* constants defining the 'offset' field which also contains the frame index */ -#define FP_FRAME_INDEX_SHIFT 28 -/* Frame buffer where the captured image is stored */ -#define FP_FRAME_INDEX_RAW_IMAGE 0 -/* First frame buffer holding a template */ -#define FP_FRAME_INDEX_TEMPLATE 1 -#define FP_FRAME_GET_BUFFER_INDEX(offset) ((offset) >> FP_FRAME_INDEX_SHIFT) -#define FP_FRAME_OFFSET_MASK 0x0FFFFFFF - -/* Version of the format of the encrypted templates. */ -#define FP_TEMPLATE_FORMAT_VERSION 3 - -/* Constants for encryption parameters */ -#define FP_CONTEXT_NONCE_BYTES 12 -#define FP_CONTEXT_USERID_WORDS (32 / sizeof(uint32_t)) -#define FP_CONTEXT_TAG_BYTES 16 -#define FP_CONTEXT_SALT_BYTES 16 -#define FP_CONTEXT_TPM_BYTES 32 - -struct ec_fp_template_encryption_metadata { - /* - * Version of the structure format (N=3). - */ - uint16_t struct_version; - /* Reserved bytes, set to 0. */ - uint16_t reserved; - /* - * The salt is *only* ever used for key derivation. The nonce is unique, - * a different one is used for every message. - */ - uint8_t nonce[FP_CONTEXT_NONCE_BYTES]; - uint8_t salt[FP_CONTEXT_SALT_BYTES]; - uint8_t tag[FP_CONTEXT_TAG_BYTES]; -}; - -struct ec_params_fp_frame { - /* - * The offset contains the template index or FP_FRAME_INDEX_RAW_IMAGE - * in the high nibble, and the real offset within the frame in - * FP_FRAME_OFFSET_MASK. - */ - uint32_t offset; - uint32_t size; -} __ec_align4; - -/* Load a template into the MCU */ -#define EC_CMD_FP_TEMPLATE 0x0405 - -/* Flag in the 'size' field indicating that the full template has been sent */ -#define FP_TEMPLATE_COMMIT 0x80000000 - -struct ec_params_fp_template { - uint32_t offset; - uint32_t size; - uint8_t data[]; -} __ec_align4; - -/* Clear the current fingerprint user context and set a new one */ -#define EC_CMD_FP_CONTEXT 0x0406 - -struct ec_params_fp_context { - uint32_t userid[FP_CONTEXT_USERID_WORDS]; -} __ec_align4; - -#define EC_CMD_FP_STATS 0x0407 - -#define FPSTATS_CAPTURE_INV BIT(0) -#define FPSTATS_MATCHING_INV BIT(1) - -struct ec_response_fp_stats { - uint32_t capture_time_us; - uint32_t matching_time_us; - uint32_t overall_time_us; - struct { - uint32_t lo; - uint32_t hi; - } overall_t0; - uint8_t timestamps_invalid; - int8_t template_matched; -} __ec_align2; - -#define EC_CMD_FP_SEED 0x0408 -struct ec_params_fp_seed { - /* - * Version of the structure format (N=3). - */ - uint16_t struct_version; - /* Reserved bytes, set to 0. */ - uint16_t reserved; - /* Seed from the TPM. */ - uint8_t seed[FP_CONTEXT_TPM_BYTES]; -} __ec_align4; - -/*****************************************************************************/ -/* Touchpad MCU commands: range 0x0500-0x05FF */ - -/* Perform touchpad self test */ -#define EC_CMD_TP_SELF_TEST 0x0500 - -/* Get number of frame types, and the size of each type */ -#define EC_CMD_TP_FRAME_INFO 0x0501 - -struct ec_response_tp_frame_info { - uint32_t n_frames; - uint32_t frame_sizes[0]; -} __ec_align4; - -/* Create a snapshot of current frame readings */ -#define EC_CMD_TP_FRAME_SNAPSHOT 0x0502 - -/* Read the frame */ -#define EC_CMD_TP_FRAME_GET 0x0503 - -struct ec_params_tp_frame_get { - uint32_t frame_index; - uint32_t offset; - uint32_t size; -} __ec_align4; - -/*****************************************************************************/ -/* EC-EC communication commands: range 0x0600-0x06FF */ - -#define EC_COMM_TEXT_MAX 8 - -/* - * Get battery static information, i.e. information that never changes, or - * very infrequently. - */ -#define EC_CMD_BATTERY_GET_STATIC 0x0600 - -/** - * struct ec_params_battery_static_info - Battery static info parameters - * @index: Battery index. - */ -struct ec_params_battery_static_info { - uint8_t index; -} __ec_align_size1; - -/** - * struct ec_response_battery_static_info - Battery static info response - * @design_capacity: Battery Design Capacity (mAh) - * @design_voltage: Battery Design Voltage (mV) - * @manufacturer: Battery Manufacturer String - * @model: Battery Model Number String - * @serial: Battery Serial Number String - * @type: Battery Type String - * @cycle_count: Battery Cycle Count - */ -struct ec_response_battery_static_info { - uint16_t design_capacity; - uint16_t design_voltage; - char manufacturer[EC_COMM_TEXT_MAX]; - char model[EC_COMM_TEXT_MAX]; - char serial[EC_COMM_TEXT_MAX]; - char type[EC_COMM_TEXT_MAX]; - /* TODO(crbug.com/795991): Consider moving to dynamic structure. */ - uint32_t cycle_count; -} __ec_align4; - -/* - * Get battery dynamic information, i.e. information that is likely to change - * every time it is read. - */ -#define EC_CMD_BATTERY_GET_DYNAMIC 0x0601 - -/** - * struct ec_params_battery_dynamic_info - Battery dynamic info parameters - * @index: Battery index. - */ -struct ec_params_battery_dynamic_info { - uint8_t index; -} __ec_align_size1; - -/** - * struct ec_response_battery_dynamic_info - Battery dynamic info response - * @actual_voltage: Battery voltage (mV) - * @actual_current: Battery current (mA); negative=discharging - * @remaining_capacity: Remaining capacity (mAh) - * @full_capacity: Capacity (mAh, might change occasionally) - * @flags: Flags, see EC_BATT_FLAG_* - * @desired_voltage: Charging voltage desired by battery (mV) - * @desired_current: Charging current desired by battery (mA) - */ -struct ec_response_battery_dynamic_info { - int16_t actual_voltage; - int16_t actual_current; - int16_t remaining_capacity; - int16_t full_capacity; - int16_t flags; - int16_t desired_voltage; - int16_t desired_current; -} __ec_align2; - -/* - * Control charger chip. Used to control charger chip on the slave. - */ -#define EC_CMD_CHARGER_CONTROL 0x0602 - -/** - * struct ec_params_charger_control - Charger control parameters - * @max_current: Charger current (mA). Positive to allow base to draw up to - * max_current and (possibly) charge battery, negative to request current - * from base (OTG). - * @otg_voltage: Voltage (mV) to use in OTG mode, ignored if max_current is - * >= 0. - * @allow_charging: Allow base battery charging (only makes sense if - * max_current > 0). - */ -struct ec_params_charger_control { - int16_t max_current; - uint16_t otg_voltage; - uint8_t allow_charging; -} __ec_align_size1; - -/*****************************************************************************/ -/* - * Reserve a range of host commands for board-specific, experimental, or - * special purpose features. These can be (re)used without updating this file. - * - * CAUTION: Don't go nuts with this. Shipping products should document ALL - * their EC commands for easier development, testing, debugging, and support. - * - * All commands MUST be #defined to be 4-digit UPPER CASE hex values - * (e.g., 0x00AB, not 0xab) for CONFIG_HOSTCMD_SECTION_SORTED to work. - * - * In your experimental code, you may want to do something like this: - * - * #define EC_CMD_MAGIC_FOO 0x0000 - * #define EC_CMD_MAGIC_BAR 0x0001 - * #define EC_CMD_MAGIC_HEY 0x0002 - * - * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_FOO, magic_foo_handler, - * EC_VER_MASK(0); - * - * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_BAR, magic_bar_handler, - * EC_VER_MASK(0); - * - * DECLARE_PRIVATE_HOST_COMMAND(EC_CMD_MAGIC_HEY, magic_hey_handler, - * EC_VER_MASK(0); - */ -#define EC_CMD_BOARD_SPECIFIC_BASE 0x3E00 -#define EC_CMD_BOARD_SPECIFIC_LAST 0x3FFF - -/* - * Given the private host command offset, calculate the true private host - * command value. - */ -#define EC_PRIVATE_HOST_COMMAND_VALUE(command) \ - (EC_CMD_BOARD_SPECIFIC_BASE + (command)) - -/*****************************************************************************/ -/* - * Passthru commands - * - * Some platforms have sub-processors chained to each other. For example. - * - * AP <--> EC <--> PD MCU - * - * The top 2 bits of the command number are used to indicate which device the - * command is intended for. Device 0 is always the device receiving the - * command; other device mapping is board-specific. - * - * When a device receives a command to be passed to a sub-processor, it passes - * it on with the device number set back to 0. This allows the sub-processor - * to remain blissfully unaware of whether the command originated on the next - * device up the chain, or was passed through from the AP. - * - * In the above example, if the AP wants to send command 0x0002 to the PD MCU, - * AP sends command 0x4002 to the EC - * EC sends command 0x0002 to the PD MCU - * EC forwards PD MCU response back to the AP - */ - -/* Offset and max command number for sub-device n */ -#define EC_CMD_PASSTHRU_OFFSET(n) (0x4000 * (n)) -#define EC_CMD_PASSTHRU_MAX(n) (EC_CMD_PASSTHRU_OFFSET(n) + 0x3fff) - -/*****************************************************************************/ -/* - * Deprecated constants. These constants have been renamed for clarity. The - * meaning and size has not changed. Programs that use the old names should - * switch to the new names soon, as the old names may not be carried forward - * forever. - */ -#define EC_HOST_PARAM_SIZE EC_PROTO2_MAX_PARAM_SIZE -#define EC_LPC_ADDR_OLD_PARAM EC_HOST_CMD_REGION1 -#define EC_OLD_PARAM_SIZE EC_HOST_CMD_REGION_SIZE - - - -#endif /* __CROS_EC_COMMANDS_H */ |