Merge tag 'nand/for-4.20' of git://git.infradead.org/linux-mtd into mtd/next

NAND core changes:
- Two batchs of cleanups of the NAND API, including:
  * Deprecating a lot of interfaces (now replaced by ->exec_op()).
  * Moving code in separate drivers (JEDEC, ONFI), in private files
    (internals), in platform drivers, etc.
  * Functions/structures reordering.
  * Exclusive use of the nand_chip structure instead of the MTD one
    all across the subsystem.
- Addition of the nand_wait_readrdy/rdy_op() helpers.

Raw NAND controllers drivers changes:
- Various coccinelle patches.
- Marvell:
  * Use regmap_update_bits() for syscon access.
  * More documentation.
  * BCH failure path rework.
  * More layouts to be supported.
  * IRQ handler complete() condition fixed.
- Fsl_ifc:
  * SRAM initialization fixed for newer controller versions.
- Denali:
  * Fix licenses mismatch and use a SPDX tag.
  * Set SPARE_AREA_SKIP_BYTES register to 8 if unset.
- Qualcomm:
  * Do not include dma-direct.h.
- Docg4:
  * Removed.
- Ams-delta:
  * Use of a GPIO lookup table
  * Internal machinery changes.

Raw NAND chip drivers changes:
- Toshiba:
  * Add support for Toshiba memory BENAND
  * Pass a single nand_chip object to the status helper.
- ESMT:
  * New driver to retrieve the ECC requirements from the 5th ID byte.

6 files changed, 471 insertions, 530 deletions

diff --git a/include/linux/mtd/jedec.h b/include/linux/mtd/jedec.h
new file mode 100644
index 000000000000..0b6b59f7cfbd
--- /dev/null
+++ b/include/linux/mtd/jedec.h
@@ -0,0 +1,91 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *			 Steven J. Hill <sjhill@realitydiluted.com>
+ *			 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Contains all JEDEC related definitions
+ */
+
+#ifndef __LINUX_MTD_JEDEC_H
+#define __LINUX_MTD_JEDEC_H
+
+struct jedec_ecc_info {
+	u8 ecc_bits;
+	u8 codeword_size;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 reserved[2];
+} __packed;
+
+/* JEDEC features */
+#define JEDEC_FEATURE_16_BIT_BUS	(1 << 0)
+
+struct nand_jedec_params {
+	/* rev info and features block */
+	/* 'J' 'E' 'S' 'D'  */
+	u8 sig[4];
+	__le16 revision;
+	__le16 features;
+	u8 opt_cmd[3];
+	__le16 sec_cmd;
+	u8 num_of_param_pages;
+	u8 reserved0[18];
+
+	/* manufacturer information block */
+	char manufacturer[12];
+	char model[20];
+	u8 jedec_id[6];
+	u8 reserved1[10];
+
+	/* memory organization block */
+	__le32 byte_per_page;
+	__le16 spare_bytes_per_page;
+	u8 reserved2[6];
+	__le32 pages_per_block;
+	__le32 blocks_per_lun;
+	u8 lun_count;
+	u8 addr_cycles;
+	u8 bits_per_cell;
+	u8 programs_per_page;
+	u8 multi_plane_addr;
+	u8 multi_plane_op_attr;
+	u8 reserved3[38];
+
+	/* electrical parameter block */
+	__le16 async_sdr_speed_grade;
+	__le16 toggle_ddr_speed_grade;
+	__le16 sync_ddr_speed_grade;
+	u8 async_sdr_features;
+	u8 toggle_ddr_features;
+	u8 sync_ddr_features;
+	__le16 t_prog;
+	__le16 t_bers;
+	__le16 t_r;
+	__le16 t_r_multi_plane;
+	__le16 t_ccs;
+	__le16 io_pin_capacitance_typ;
+	__le16 input_pin_capacitance_typ;
+	__le16 clk_pin_capacitance_typ;
+	u8 driver_strength_support;
+	__le16 t_adl;
+	u8 reserved4[36];
+
+	/* ECC and endurance block */
+	u8 guaranteed_good_blocks;
+	__le16 guaranteed_block_endurance;
+	struct jedec_ecc_info ecc_info[4];
+	u8 reserved5[29];
+
+	/* reserved */
+	u8 reserved6[148];
+
+	/* vendor */
+	__le16 vendor_rev_num;
+	u8 reserved7[88];
+
+	/* CRC for Parameter Page */
+	__le16 crc;
+} __packed;
+
+#endif /* __LINUX_MTD_JEDEC_H */
diff --git a/include/linux/mtd/nand_bch.h b/include/linux/mtd/nand_bch.h
index 98f20ef05d60..b8106651f807 100644
--- a/include/linux/mtd/nand_bch.h
+++ b/include/linux/mtd/nand_bch.h
@@ -12,6 +12,7 @@
 #define __MTD_NAND_BCH_H__
 
 struct mtd_info;
+struct nand_chip;
 struct nand_bch_control;
 
 #if defined(CONFIG_MTD_NAND_ECC_BCH)
@@ -21,14 +22,14 @@ static inline int mtd_nand_has_bch(void) { return 1; }
 /*
  * Calculate BCH ecc code
  */
-int nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+int nand_bch_calculate_ecc(struct nand_chip *chip, const u_char *dat,
 			   u_char *ecc_code);
 
 /*
  * Detect and correct bit errors
  */
-int nand_bch_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc,
-			  u_char *calc_ecc);
+int nand_bch_correct_data(struct nand_chip *chip, u_char *dat,
+			  u_char *read_ecc, u_char *calc_ecc);
 /*
  * Initialize BCH encoder/decoder
  */
@@ -43,14 +44,14 @@ void nand_bch_free(struct nand_bch_control *nbc);
 static inline int mtd_nand_has_bch(void) { return 0; }
 
 static inline int
-nand_bch_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
+nand_bch_calculate_ecc(struct nand_chip *chip, const u_char *dat,
 		       u_char *ecc_code)
 {
 	return -1;
 }
 
 static inline int
-nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
+nand_bch_correct_data(struct nand_chip *chip, unsigned char *buf,
 		      unsigned char *read_ecc, unsigned char *calc_ecc)
 {
 	return -ENOTSUPP;
diff --git a/include/linux/mtd/nand_ecc.h b/include/linux/mtd/nand_ecc.h
index 8a2decf7462c..0b3bb156c344 100644
--- a/include/linux/mtd/nand_ecc.h
+++ b/include/linux/mtd/nand_ecc.h
@@ -13,28 +13,30 @@
 #ifndef __MTD_NAND_ECC_H__
 #define __MTD_NAND_ECC_H__
 
-struct mtd_info;
+struct nand_chip;
 
 /*
  * Calculate 3 byte ECC code for eccsize byte block
  */
 void __nand_calculate_ecc(const u_char *dat, unsigned int eccsize,
-				u_char *ecc_code);
+			  u_char *ecc_code, bool sm_order);
 
 /*
  * Calculate 3 byte ECC code for 256/512 byte block
  */
-int nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code);
+int nand_calculate_ecc(struct nand_chip *chip, const u_char *dat,
+		       u_char *ecc_code);
 
 /*
  * Detect and correct a 1 bit error for eccsize byte block
  */
 int __nand_correct_data(u_char *dat, u_char *read_ecc, u_char *calc_ecc,
-			unsigned int eccsize);
+			unsigned int eccsize, bool sm_order);
 
 /*
  * Detect and correct a 1 bit error for 256/512 byte block
  */
-int nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc);
+int nand_correct_data(struct nand_chip *chip, u_char *dat, u_char *read_ecc,
+		      u_char *calc_ecc);
 
 #endif /* __MTD_NAND_ECC_H__ */
diff --git a/include/linux/mtd/onfi.h b/include/linux/mtd/onfi.h
new file mode 100644
index 000000000000..339ac798568e
--- /dev/null
+++ b/include/linux/mtd/onfi.h
@@ -0,0 +1,178 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *			 Steven J. Hill <sjhill@realitydiluted.com>
+ *			 Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Contains all ONFI related definitions
+ */
+
+#ifndef __LINUX_MTD_ONFI_H
+#define __LINUX_MTD_ONFI_H
+
+#include <linux/types.h>
+
+/* ONFI version bits */
+#define ONFI_VERSION_1_0		BIT(1)
+#define ONFI_VERSION_2_0		BIT(2)
+#define ONFI_VERSION_2_1		BIT(3)
+#define ONFI_VERSION_2_2		BIT(4)
+#define ONFI_VERSION_2_3		BIT(5)
+#define ONFI_VERSION_3_0		BIT(6)
+#define ONFI_VERSION_3_1		BIT(7)
+#define ONFI_VERSION_3_2		BIT(8)
+#define ONFI_VERSION_4_0		BIT(9)
+
+/* ONFI features */
+#define ONFI_FEATURE_16_BIT_BUS		(1 << 0)
+#define ONFI_FEATURE_EXT_PARAM_PAGE	(1 << 7)
+
+/* ONFI timing mode, used in both asynchronous and synchronous mode */
+#define ONFI_TIMING_MODE_0		(1 << 0)
+#define ONFI_TIMING_MODE_1		(1 << 1)
+#define ONFI_TIMING_MODE_2		(1 << 2)
+#define ONFI_TIMING_MODE_3		(1 << 3)
+#define ONFI_TIMING_MODE_4		(1 << 4)
+#define ONFI_TIMING_MODE_5		(1 << 5)
+#define ONFI_TIMING_MODE_UNKNOWN	(1 << 6)
+
+/* ONFI feature number/address */
+#define ONFI_FEATURE_NUMBER		256
+#define ONFI_FEATURE_ADDR_TIMING_MODE	0x1
+
+/* Vendor-specific feature address (Micron) */
+#define ONFI_FEATURE_ADDR_READ_RETRY	0x89
+#define ONFI_FEATURE_ON_DIE_ECC		0x90
+#define   ONFI_FEATURE_ON_DIE_ECC_EN	BIT(3)
+
+/* ONFI subfeature parameters length */
+#define ONFI_SUBFEATURE_PARAM_LEN	4
+
+/* ONFI optional commands SET/GET FEATURES supported? */
+#define ONFI_OPT_CMD_SET_GET_FEATURES	(1 << 2)
+
+struct nand_onfi_params {
+	/* rev info and features block */
+	/* 'O' 'N' 'F' 'I'  */
+	u8 sig[4];
+	__le16 revision;
+	__le16 features;
+	__le16 opt_cmd;
+	u8 reserved0[2];
+	__le16 ext_param_page_length; /* since ONFI 2.1 */
+	u8 num_of_param_pages;        /* since ONFI 2.1 */
+	u8 reserved1[17];
+
+	/* manufacturer information block */
+	char manufacturer[12];
+	char model[20];
+	u8 jedec_id;
+	__le16 date_code;
+	u8 reserved2[13];
+
+	/* memory organization block */
+	__le32 byte_per_page;
+	__le16 spare_bytes_per_page;
+	__le32 data_bytes_per_ppage;
+	__le16 spare_bytes_per_ppage;
+	__le32 pages_per_block;
+	__le32 blocks_per_lun;
+	u8 lun_count;
+	u8 addr_cycles;
+	u8 bits_per_cell;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 guaranteed_good_blocks;
+	__le16 guaranteed_block_endurance;
+	u8 programs_per_page;
+	u8 ppage_attr;
+	u8 ecc_bits;
+	u8 interleaved_bits;
+	u8 interleaved_ops;
+	u8 reserved3[13];
+
+	/* electrical parameter block */
+	u8 io_pin_capacitance_max;
+	__le16 async_timing_mode;
+	__le16 program_cache_timing_mode;
+	__le16 t_prog;
+	__le16 t_bers;
+	__le16 t_r;
+	__le16 t_ccs;
+	__le16 src_sync_timing_mode;
+	u8 src_ssync_features;
+	__le16 clk_pin_capacitance_typ;
+	__le16 io_pin_capacitance_typ;
+	__le16 input_pin_capacitance_typ;
+	u8 input_pin_capacitance_max;
+	u8 driver_strength_support;
+	__le16 t_int_r;
+	__le16 t_adl;
+	u8 reserved4[8];
+
+	/* vendor */
+	__le16 vendor_revision;
+	u8 vendor[88];
+
+	__le16 crc;
+} __packed;
+
+#define ONFI_CRC_BASE	0x4F4E
+
+/* Extended ECC information Block Definition (since ONFI 2.1) */
+struct onfi_ext_ecc_info {
+	u8 ecc_bits;
+	u8 codeword_size;
+	__le16 bb_per_lun;
+	__le16 block_endurance;
+	u8 reserved[2];
+} __packed;
+
+#define ONFI_SECTION_TYPE_0	0	/* Unused section. */
+#define ONFI_SECTION_TYPE_1	1	/* for additional sections. */
+#define ONFI_SECTION_TYPE_2	2	/* for ECC information. */
+struct onfi_ext_section {
+	u8 type;
+	u8 length;
+} __packed;
+
+#define ONFI_EXT_SECTION_MAX 8
+
+/* Extended Parameter Page Definition (since ONFI 2.1) */
+struct onfi_ext_param_page {
+	__le16 crc;
+	u8 sig[4];             /* 'E' 'P' 'P' 'S' */
+	u8 reserved0[10];
+	struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
+
+	/*
+	 * The actual size of the Extended Parameter Page is in
+	 * @ext_param_page_length of nand_onfi_params{}.
+	 * The following are the variable length sections.
+	 * So we do not add any fields below. Please see the ONFI spec.
+	 */
+} __packed;
+
+/**
+ * struct onfi_params - ONFI specific parameters that will be reused
+ * @version: ONFI version (BCD encoded), 0 if ONFI is not supported
+ * @tPROG: Page program time
+ * @tBERS: Block erase time
+ * @tR: Page read time
+ * @tCCS: Change column setup time
+ * @async_timing_mode: Supported asynchronous timing mode
+ * @vendor_revision: Vendor specific revision number
+ * @vendor: Vendor specific data
+ */
+struct onfi_params {
+	int version;
+	u16 tPROG;
+	u16 tBERS;
+	u16 tR;
+	u16 tCCS;
+	u16 async_timing_mode;
+	u16 vendor_revision;
+	u8 vendor[88];
+};
+
+#endif /* __LINUX_MTD_ONFI_H */
diff --git a/include/linux/mtd/platnand.h b/include/linux/mtd/platnand.h
new file mode 100644
index 000000000000..bc11eb6b593b
--- /dev/null
+++ b/include/linux/mtd/platnand.h
@@ -0,0 +1,74 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ *  Copyright © 2000-2010 David Woodhouse <dwmw2@infradead.org>
+ *			  Steven J. Hill <sjhill@realitydiluted.com>
+ *			  Thomas Gleixner <tglx@linutronix.de>
+ *
+ * Contains all platform NAND related definitions.
+ */
+
+#ifndef __LINUX_MTD_PLATNAND_H
+#define __LINUX_MTD_PLATNAND_H
+
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/rawnand.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct platform_nand_chip - chip level device structure
+ * @nr_chips: max. number of chips to scan for
+ * @chip_offset: chip number offset
+ * @nr_partitions: number of partitions pointed to by partitions (or zero)
+ * @partitions: mtd partition list
+ * @chip_delay: R/B delay value in us
+ * @options: Option flags, e.g. 16bit buswidth
+ * @bbt_options: BBT option flags, e.g. NAND_BBT_USE_FLASH
+ * @part_probe_types: NULL-terminated array of probe types
+ */
+struct platform_nand_chip {
+	int nr_chips;
+	int chip_offset;
+	int nr_partitions;
+	struct mtd_partition *partitions;
+	int chip_delay;
+	unsigned int options;
+	unsigned int bbt_options;
+	const char **part_probe_types;
+};
+
+/**
+ * struct platform_nand_ctrl - controller level device structure
+ * @probe: platform specific function to probe/setup hardware
+ * @remove: platform specific function to remove/teardown hardware
+ * @dev_ready: platform specific function to read ready/busy pin
+ * @select_chip: platform specific chip select function
+ * @cmd_ctrl: platform specific function for controlling
+ *	      ALE/CLE/nCE. Also used to write command and address
+ * @write_buf: platform specific function for write buffer
+ * @read_buf: platform specific function for read buffer
+ * @priv: private data to transport driver specific settings
+ *
+ * All fields are optional and depend on the hardware driver requirements
+ */
+struct platform_nand_ctrl {
+	int (*probe)(struct platform_device *pdev);
+	void (*remove)(struct platform_device *pdev);
+	int (*dev_ready)(struct nand_chip *chip);
+	void (*select_chip)(struct nand_chip *chip, int cs);
+	void (*cmd_ctrl)(struct nand_chip *chip, int dat, unsigned int ctrl);
+	void (*write_buf)(struct nand_chip *chip, const uint8_t *buf, int len);
+	void (*read_buf)(struct nand_chip *chip, uint8_t *buf, int len);
+	void *priv;
+};
+
+/**
+ * struct platform_nand_data - container structure for platform-specific data
+ * @chip: chip level chip structure
+ * @ctrl: controller level device structure
+ */
+struct platform_nand_data {
+	struct platform_nand_chip chip;
+	struct platform_nand_ctrl ctrl;
+};
+
+#endif /* __LINUX_MTD_PLATNAND_H */
diff --git a/include/linux/mtd/rawnand.h b/include/linux/mtd/rawnand.h
index efb2345359bb..e10b126e148f 100644
--- a/include/linux/mtd/rawnand.h
+++ b/include/linux/mtd/rawnand.h
@@ -21,22 +21,12 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/flashchip.h>
 #include <linux/mtd/bbm.h>
+#include <linux/mtd/jedec.h>
+#include <linux/mtd/onfi.h>
 #include <linux/of.h>
 #include <linux/types.h>
 
-struct nand_flash_dev;
-
-/* Scan and identify a NAND device */
-int nand_scan_with_ids(struct mtd_info *mtd, int max_chips,
-		       struct nand_flash_dev *ids);
-
-static inline int nand_scan(struct mtd_info *mtd, int max_chips)
-{
-	return nand_scan_with_ids(mtd, max_chips, NULL);
-}
-
-/* Internal helper for board drivers which need to override command function */
-void nand_wait_ready(struct mtd_info *mtd);
+struct nand_chip;
 
 /* The maximum number of NAND chips in an array */
 #define NAND_MAX_CHIPS		8
@@ -131,9 +121,11 @@ enum nand_ecc_algo {
 #define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
 #define NAND_ECC_MAXIMIZE		BIT(1)
 
-/* Bit mask for flags passed to do_nand_read_ecc */
-#define NAND_GET_DEVICE		0x80
-
+/*
+ * When using software implementation of Hamming, we can specify which byte
+ * ordering should be used.
+ */
+#define NAND_ECC_SOFT_HAMMING_SM_ORDER	BIT(2)
 
 /*
  * Option constants for bizarre disfunctionality and real
@@ -175,9 +167,7 @@ enum nand_ecc_algo {
 #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
 
 /* Macros to identify the above */
-#define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG))
 #define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ))
-#define NAND_HAS_SUBPAGE_WRITE(chip) !((chip)->options & NAND_NO_SUBPAGE_WRITE)
 
 /* Non chip related options */
 /* This option skips the bbt scan during initialization. */
@@ -198,10 +188,10 @@ enum nand_ecc_algo {
 #define NAND_USE_BOUNCE_BUFFER	0x00100000
 
 /*
- * In case your controller is implementing ->cmd_ctrl() and is relying on the
- * default ->cmdfunc() implementation, you may want to let the core handle the
- * tCCS delay which is required when a column change (RNDIN or RNDOUT) is
- * requested.
+ * In case your controller is implementing ->legacy.cmd_ctrl() and is relying
+ * on the default ->cmdfunc() implementation, you may want to let the core
+ * handle the tCCS delay which is required when a column change (RNDIN or
+ * RNDOUT) is requested.
  * If your controller already takes care of this delay, you don't need to set
  * this flag.
  */
@@ -222,250 +212,6 @@ enum nand_ecc_algo {
 #define NAND_CI_CELLTYPE_MSK	0x0C
 #define NAND_CI_CELLTYPE_SHIFT	2
 
-/* Keep gcc happy */
-struct nand_chip;
-
-/* ONFI version bits */
-#define ONFI_VERSION_1_0		BIT(1)
-#define ONFI_VERSION_2_0		BIT(2)
-#define ONFI_VERSION_2_1		BIT(3)
-#define ONFI_VERSION_2_2		BIT(4)
-#define ONFI_VERSION_2_3		BIT(5)
-#define ONFI_VERSION_3_0		BIT(6)
-#define ONFI_VERSION_3_1		BIT(7)
-#define ONFI_VERSION_3_2		BIT(8)
-#define ONFI_VERSION_4_0		BIT(9)
-
-/* ONFI features */
-#define ONFI_FEATURE_16_BIT_BUS		(1 << 0)
-#define ONFI_FEATURE_EXT_PARAM_PAGE	(1 << 7)
-
-/* ONFI timing mode, used in both asynchronous and synchronous mode */
-#define ONFI_TIMING_MODE_0		(1 << 0)
-#define ONFI_TIMING_MODE_1		(1 << 1)
-#define ONFI_TIMING_MODE_2		(1 << 2)
-#define ONFI_TIMING_MODE_3		(1 << 3)
-#define ONFI_TIMING_MODE_4		(1 << 4)
-#define ONFI_TIMING_MODE_5		(1 << 5)
-#define ONFI_TIMING_MODE_UNKNOWN	(1 << 6)
-
-/* ONFI feature number/address */
-#define ONFI_FEATURE_NUMBER		256
-#define ONFI_FEATURE_ADDR_TIMING_MODE	0x1
-
-/* Vendor-specific feature address (Micron) */
-#define ONFI_FEATURE_ADDR_READ_RETRY	0x89
-#define ONFI_FEATURE_ON_DIE_ECC		0x90
-#define   ONFI_FEATURE_ON_DIE_ECC_EN	BIT(3)
-
-/* ONFI subfeature parameters length */
-#define ONFI_SUBFEATURE_PARAM_LEN	4
-
-/* ONFI optional commands SET/GET FEATURES supported? */
-#define ONFI_OPT_CMD_SET_GET_FEATURES	(1 << 2)
-
-struct nand_onfi_params {
-	/* rev info and features block */
-	/* 'O' 'N' 'F' 'I'  */
-	u8 sig[4];
-	__le16 revision;
-	__le16 features;
-	__le16 opt_cmd;
-	u8 reserved0[2];
-	__le16 ext_param_page_length; /* since ONFI 2.1 */
-	u8 num_of_param_pages;        /* since ONFI 2.1 */
-	u8 reserved1[17];
-
-	/* manufacturer information block */
-	char manufacturer[12];
-	char model[20];
-	u8 jedec_id;
-	__le16 date_code;
-	u8 reserved2[13];
-
-	/* memory organization block */
-	__le32 byte_per_page;
-	__le16 spare_bytes_per_page;
-	__le32 data_bytes_per_ppage;
-	__le16 spare_bytes_per_ppage;
-	__le32 pages_per_block;
-	__le32 blocks_per_lun;
-	u8 lun_count;
-	u8 addr_cycles;
-	u8 bits_per_cell;
-	__le16 bb_per_lun;
-	__le16 block_endurance;
-	u8 guaranteed_good_blocks;
-	__le16 guaranteed_block_endurance;
-	u8 programs_per_page;
-	u8 ppage_attr;
-	u8 ecc_bits;
-	u8 interleaved_bits;
-	u8 interleaved_ops;
-	u8 reserved3[13];
-
-	/* electrical parameter block */
-	u8 io_pin_capacitance_max;
-	__le16 async_timing_mode;
-	__le16 program_cache_timing_mode;
-	__le16 t_prog;
-	__le16 t_bers;
-	__le16 t_r;
-	__le16 t_ccs;
-	__le16 src_sync_timing_mode;
-	u8 src_ssync_features;
-	__le16 clk_pin_capacitance_typ;
-	__le16 io_pin_capacitance_typ;
-	__le16 input_pin_capacitance_typ;
-	u8 input_pin_capacitance_max;
-	u8 driver_strength_support;
-	__le16 t_int_r;
-	__le16 t_adl;
-	u8 reserved4[8];
-
-	/* vendor */
-	__le16 vendor_revision;
-	u8 vendor[88];
-
-	__le16 crc;
-} __packed;
-
-#define ONFI_CRC_BASE	0x4F4E
-
-/* Extended ECC information Block Definition (since ONFI 2.1) */
-struct onfi_ext_ecc_info {
-	u8 ecc_bits;
-	u8 codeword_size;
-	__le16 bb_per_lun;
-	__le16 block_endurance;
-	u8 reserved[2];
-} __packed;
-
-#define ONFI_SECTION_TYPE_0	0	/* Unused section. */
-#define ONFI_SECTION_TYPE_1	1	/* for additional sections. */
-#define ONFI_SECTION_TYPE_2	2	/* for ECC information. */
-struct onfi_ext_section {
-	u8 type;
-	u8 length;
-} __packed;
-
-#define ONFI_EXT_SECTION_MAX 8
-
-/* Extended Parameter Page Definition (since ONFI 2.1) */
-struct onfi_ext_param_page {
-	__le16 crc;
-	u8 sig[4];             /* 'E' 'P' 'P' 'S' */
-	u8 reserved0[10];
-	struct onfi_ext_section sections[ONFI_EXT_SECTION_MAX];
-
-	/*
-	 * The actual size of the Extended Parameter Page is in
-	 * @ext_param_page_length of nand_onfi_params{}.
-	 * The following are the variable length sections.
-	 * So we do not add any fields below. Please see the ONFI spec.
-	 */
-} __packed;
-
-struct jedec_ecc_info {
-	u8 ecc_bits;
-	u8 codeword_size;
-	__le16 bb_per_lun;
-	__le16 block_endurance;
-	u8 reserved[2];
-} __packed;
-
-/* JEDEC features */
-#define JEDEC_FEATURE_16_BIT_BUS	(1 << 0)
-
-struct nand_jedec_params {
-	/* rev info and features block */
-	/* 'J' 'E' 'S' 'D'  */
-	u8 sig[4];
-	__le16 revision;
-	__le16 features;
-	u8 opt_cmd[3];
-	__le16 sec_cmd;
-	u8 num_of_param_pages;
-	u8 reserved0[18];
-
-	/* manufacturer information block */
-	char manufacturer[12];
-	char model[20];
-	u8 jedec_id[6];
-	u8 reserved1[10];
-
-	/* memory organization block */
-	__le32 byte_per_page;
-	__le16 spare_bytes_per_page;
-	u8 reserved2[6];
-	__le32 pages_per_block;
-	__le32 blocks_per_lun;
-	u8 lun_count;
-	u8 addr_cycles;
-	u8 bits_per_cell;
-	u8 programs_per_page;
-	u8 multi_plane_addr;
-	u8 multi_plane_op_attr;
-	u8 reserved3[38];
-
-	/* electrical parameter block */
-	__le16 async_sdr_speed_grade;
-	__le16 toggle_ddr_speed_grade;
-	__le16 sync_ddr_speed_grade;
-	u8 async_sdr_features;
-	u8 toggle_ddr_features;
-	u8 sync_ddr_features;
-	__le16 t_prog;
-	__le16 t_bers;
-	__le16 t_r;
-	__le16 t_r_multi_plane;
-	__le16 t_ccs;
-	__le16 io_pin_capacitance_typ;
-	__le16 input_pin_capacitance_typ;
-	__le16 clk_pin_capacitance_typ;
-	u8 driver_strength_support;
-	__le16 t_adl;
-	u8 reserved4[36];
-
-	/* ECC and endurance block */
-	u8 guaranteed_good_blocks;
-	__le16 guaranteed_block_endurance;
-	struct jedec_ecc_info ecc_info[4];
-	u8 reserved5[29];
-
-	/* reserved */
-	u8 reserved6[148];
-
-	/* vendor */
-	__le16 vendor_rev_num;
-	u8 reserved7[88];
-
-	/* CRC for Parameter Page */
-	__le16 crc;
-} __packed;
-
-/**
- * struct onfi_params - ONFI specific parameters that will be reused
- * @version: ONFI version (BCD encoded), 0 if ONFI is not supported
- * @tPROG: Page program time
- * @tBERS: Block erase time
- * @tR: Page read time
- * @tCCS: Change column setup time
- * @async_timing_mode: Supported asynchronous timing mode
- * @vendor_revision: Vendor specific revision number
- * @vendor: Vendor specific data
- */
-struct onfi_params {
-	int version;
-	u16 tPROG;
-	u16 tBERS;
-	u16 tR;
-	u16 tCCS;
-	u16 async_timing_mode;
-	u16 vendor_revision;
-	u8 vendor[88];
-};
-
 /**
  * struct nand_parameters - NAND generic parameters from the parameter page
  * @model: Model name
@@ -646,31 +392,28 @@ struct nand_ecc_ctrl {
 	void *priv;
 	u8 *calc_buf;
 	u8 *code_buf;
-	void (*hwctl)(struct mtd_info *mtd, int mode);
-	int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
-			uint8_t *ecc_code);
-	int (*correct)(struct mtd_info *mtd, uint8_t *dat, uint8_t *read_ecc,
-			uint8_t *calc_ecc);
-	int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int oob_required, int page);
-	int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int oob_required, int page);
-	int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint8_t *buf, int oob_required, int page);
-	int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t offs, uint32_t len, uint8_t *buf, int page);
-	int (*write_subpage)(struct mtd_info *mtd, struct nand_chip *chip,
-			uint32_t offset, uint32_t data_len,
-			const uint8_t *data_buf, int oob_required, int page);
-	int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int oob_required, int page);
-	int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page);
-	int (*read_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page);
-	int (*read_oob)(struct mtd_info *mtd, struct nand_chip *chip, int page);
-	int (*write_oob)(struct mtd_info *mtd, struct nand_chip *chip,
-			int page);
+	void (*hwctl)(struct nand_chip *chip, int mode);
+	int (*calculate)(struct nand_chip *chip, const uint8_t *dat,
+			 uint8_t *ecc_code);
+	int (*correct)(struct nand_chip *chip, uint8_t *dat, uint8_t *read_ecc,
+		       uint8_t *calc_ecc);
+	int (*read_page_raw)(struct nand_chip *chip, uint8_t *buf,
+			     int oob_required, int page);
+	int (*write_page_raw)(struct nand_chip *chip, const uint8_t *buf,
+			      int oob_required, int page);
+	int (*read_page)(struct nand_chip *chip, uint8_t *buf,
+			 int oob_required, int page);
+	int (*read_subpage)(struct nand_chip *chip, uint32_t offs,
+			    uint32_t len, uint8_t *buf, int page);
+	int (*write_subpage)(struct nand_chip *chip, uint32_t offset,
+			     uint32_t data_len, const uint8_t *data_buf,
+			     int oob_required, int page);
+	int (*write_page)(struct nand_chip *chip, const uint8_t *buf,
+			  int oob_required, int page);
+	int (*write_oob_raw)(struct nand_chip *chip, int page);
+	int (*read_oob_raw)(struct nand_chip *chip, int page);
+	int (*read_oob)(struct nand_chip *chip, int page);
+	int (*write_oob)(struct nand_chip *chip, int page);
 };
 
 /**
@@ -800,24 +543,6 @@ nand_get_sdr_timings(const struct nand_data_interface *conf)
 }
 
 /**
- * struct nand_manufacturer_ops - NAND Manufacturer operations
- * @detect: detect the NAND memory organization and capabilities
- * @init: initialize all vendor specific fields (like the ->read_retry()
- *	  implementation) if any.
- * @cleanup: the ->init() function may have allocated resources, ->cleanup()
- *	     is here to let vendor specific code release those resources.
- * @fixup_onfi_param_page: apply vendor specific fixups to the ONFI parameter
- *			   page. This is called after the checksum is verified.
- */
-struct nand_manufacturer_ops {
-	void (*detect)(struct nand_chip *chip);
-	int (*init)(struct nand_chip *chip);
-	void (*cleanup)(struct nand_chip *chip);
-	void (*fixup_onfi_param_page)(struct nand_chip *chip,
-				      struct nand_onfi_params *p);
-};
-
-/**
  * struct nand_op_cmd_instr - Definition of a command instruction
  * @opcode: the command to issue in one cycle
  */
@@ -1175,44 +900,72 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
 			   const struct nand_operation *op, bool check_only);
 
 /**
+ * struct nand_legacy - NAND chip legacy fields/hooks
+ * @IO_ADDR_R: address to read the 8 I/O lines of the flash device
+ * @IO_ADDR_W: address to write the 8 I/O lines of the flash device
+ * @read_byte: read one byte from the chip
+ * @write_byte: write a single byte to the chip on the low 8 I/O lines
+ * @write_buf: write data from the buffer to the chip
+ * @read_buf: read data from the chip into the buffer
+ * @cmd_ctrl: hardware specific function for controlling ALE/CLE/nCE. Also used
+ *	      to write command and address
+ * @cmdfunc: hardware specific function for writing commands to the chip.
+ * @dev_ready: hardware specific function for accessing device ready/busy line.
+ *	       If set to NULL no access to ready/busy is available and the
+ *	       ready/busy information is read from the chip status register.
+ * @waitfunc: hardware specific function for wait on ready.
+ * @block_bad: check if a block is bad, using OOB markers
+ * @block_markbad: mark a block bad
+ * @erase: erase function
+ * @set_features: set the NAND chip features
+ * @get_features: get the NAND chip features
+ * @chip_delay: chip dependent delay for transferring data from array to read
+ *		regs (tR).
+ *
+ * If you look at this structure you're already wrong. These fields/hooks are
+ * all deprecated.
+ */
+struct nand_legacy {
+	void __iomem *IO_ADDR_R;
+	void __iomem *IO_ADDR_W;
+	u8 (*read_byte)(struct nand_chip *chip);
+	void (*write_byte)(struct nand_chip *chip, u8 byte);
+	void (*write_buf)(struct nand_chip *chip, const u8 *buf, int len);
+	void (*read_buf)(struct nand_chip *chip, u8 *buf, int len);
+	void (*cmd_ctrl)(struct nand_chip *chip, int dat, unsigned int ctrl);
+	void (*cmdfunc)(struct nand_chip *chip, unsigned command, int column,
+			int page_addr);
+	int (*dev_ready)(struct nand_chip *chip);
+	int (*waitfunc)(struct nand_chip *chip);
+	int (*block_bad)(struct nand_chip *chip, loff_t ofs);
+	int (*block_markbad)(struct nand_chip *chip, loff_t ofs);
+	int (*erase)(struct nand_chip *chip, int page);
+	int (*set_features)(struct nand_chip *chip, int feature_addr,
+			    u8 *subfeature_para);
+	int (*get_features)(struct nand_chip *chip, int feature_addr,
+			    u8 *subfeature_para);
+	int chip_delay;
+};
+
+/**
  * struct nand_chip - NAND Private Flash Chip Data
  * @mtd:		MTD device registered to the MTD framework
- * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
- *			flash device
- * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
- *			flash device.
- * @read_byte:		[REPLACEABLE] read one byte from the chip
- * @read_word:		[REPLACEABLE] read one word from the chip
- * @write_byte:		[REPLACEABLE] write a single byte to the chip on the
- *			low 8 I/O lines
- * @write_buf:		[REPLACEABLE] write data from the buffer to the chip
- * @read_buf:		[REPLACEABLE] read data from the chip into the buffer
+ * @legacy:		All legacy fields/hooks. If you develop a new driver,
+ *			don't even try to use any of these fields/hooks, and if
+ *			you're modifying an existing driver that is using those
+ *			fields/hooks, you should consider reworking the driver
+ *			avoid using them.
  * @select_chip:	[REPLACEABLE] select chip nr
- * @block_bad:		[REPLACEABLE] check if a block is bad, using OOB markers
- * @block_markbad:	[REPLACEABLE] mark a block bad
- * @cmd_ctrl:		[BOARDSPECIFIC] hardwarespecific function for controlling
- *			ALE/CLE/nCE. Also used to write command and address
- * @dev_ready:		[BOARDSPECIFIC] hardwarespecific function for accessing
- *			device ready/busy line. If set to NULL no access to
- *			ready/busy is available and the ready/busy information
- *			is read from the chip status register.
- * @cmdfunc:		[REPLACEABLE] hardwarespecific function for writing
- *			commands to the chip.
- * @waitfunc:		[REPLACEABLE] hardwarespecific function for wait on
- *			ready.
  * @exec_op:		controller specific method to execute NAND operations.
  *			This method replaces ->cmdfunc(),
- *			->{read,write}_{buf,byte,word}(), ->dev_ready() and
- *			->waifunc().
+ *			->legacy.{read,write}_{buf,byte,word}(),
+ *			->legacy.dev_ready() and ->waifunc().
  * @setup_read_retry:	[FLASHSPECIFIC] flash (vendor) specific function for
  *			setting the read-retry mode. Mostly needed for MLC NAND.
  * @ecc:		[BOARDSPECIFIC] ECC control structure
  * @buf_align:		minimum buffer alignment required by a platform
  * @dummy_controller:	dummy controller implementation for drivers that can
  *			only control a single chip
- * @erase:		[REPLACEABLE] erase function
- * @chip_delay:		[BOARDSPECIFIC] chip dependent delay for transferring
- *			data from array to read regs (tR).
  * @state:		[INTERN] the current state of the NAND device
  * @oob_poi:		"poison value buffer," used for laying out OOB data
  *			before writing
@@ -1260,8 +1013,6 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
  * @blocks_per_die:	[INTERN] The number of PEBs in a die
  * @data_interface:	[INTERN] NAND interface timing information
  * @read_retries:	[INTERN] the number of read retry modes supported
- * @set_features:	[REPLACEABLE] set the NAND chip features
- * @get_features:	[REPLACEABLE] get the NAND chip features
  * @setup_data_interface: [OPTIONAL] setup the data interface and timing. If
  *			  chipnr is set to %NAND_DATA_IFACE_CHECK_ONLY this
  *			  means the configuration should not be applied but
@@ -1283,35 +1034,17 @@ int nand_op_parser_exec_op(struct nand_chip *chip,
 
 struct nand_chip {
 	struct mtd_info mtd;
-	void __iomem *IO_ADDR_R;
-	void __iomem *IO_ADDR_W;
 
-	uint8_t (*read_byte)(struct mtd_info *mtd);
-	u16 (*read_word)(struct mtd_info *mtd);
-	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
-	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-	void (*select_chip)(struct mtd_info *mtd, int chip);
-	int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
-	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
-	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
-	int (*dev_ready)(struct mtd_info *mtd);
-	void (*cmdfunc)(struct mtd_info *mtd, unsigned command, int column,
-			int page_addr);
-	int(*waitfunc)(struct mtd_info *mtd, struct nand_chip *this);
+	struct nand_legacy legacy;
+
+	void (*select_chip)(struct nand_chip *chip, int cs);
 	int (*exec_op)(struct nand_chip *chip,
 		       const struct nand_operation *op,
 		       bool check_only);
-	int (*erase)(struct mtd_info *mtd, int page);
-	int (*set_features)(struct mtd_info *mtd, struct nand_chip *chip,
-			    int feature_addr, uint8_t *subfeature_para);
-	int (*get_features)(struct mtd_info *mtd, struct nand_chip *chip,
-			    int feature_addr, uint8_t *subfeature_para);
-	int (*setup_read_retry)(struct mtd_info *mtd, int retry_mode);
-	int (*setup_data_interface)(struct mtd_info *mtd, int chipnr,
+	int (*setup_read_retry)(struct nand_chip *chip, int retry_mode);
+	int (*setup_data_interface)(struct nand_chip *chip, int chipnr,
 				    const struct nand_data_interface *conf);
 
-	int chip_delay;
 	unsigned int options;
 	unsigned int bbt_options;
 
@@ -1420,27 +1153,6 @@ static inline void *nand_get_manufacturer_data(struct nand_chip *chip)
 }
 
 /*
- * NAND Flash Manufacturer ID Codes
- */
-#define NAND_MFR_TOSHIBA	0x98
-#define NAND_MFR_ESMT		0xc8
-#define NAND_MFR_SAMSUNG	0xec
-#define NAND_MFR_FUJITSU	0x04
-#define NAND_MFR_NATIONAL	0x8f
-#define NAND_MFR_RENESAS	0x07
-#define NAND_MFR_STMICRO	0x20
-#define NAND_MFR_HYNIX		0xad
-#define NAND_MFR_MICRON		0x2c
-#define NAND_MFR_AMD		0x01
-#define NAND_MFR_MACRONIX	0xc2
-#define NAND_MFR_EON		0x92
-#define NAND_MFR_SANDISK	0x45
-#define NAND_MFR_INTEL		0x89
-#define NAND_MFR_ATO		0x9b
-#define NAND_MFR_WINBOND	0xef
-
-
-/*
  * A helper for defining older NAND chips where the second ID byte fully
  * defined the chip, including the geometry (chip size, eraseblock size, page
  * size). All these chips have 512 bytes NAND page size.
@@ -1519,114 +1231,7 @@ struct nand_flash_dev {
 	int onfi_timing_mode_default;
 };
 
-/**
- * struct nand_manufacturer - NAND Flash Manufacturer structure
- * @name:	Manufacturer name
- * @id:		manufacturer ID code of device.
- * @ops:	manufacturer operations
-*/
-struct nand_manufacturer {
-	int id;
-	char *name;
-	const struct nand_manufacturer_ops *ops;
-};
-
-const struct nand_manufacturer *nand_get_manufacturer(u8 id);
-
-static inline const char *
-nand_manufacturer_name(const struct nand_manufacturer *manufacturer)
-{
-	return manufacturer ? manufacturer->name : "Unknown";
-}
-
-extern struct nand_flash_dev nand_flash_ids[];
-
-extern const struct nand_manufacturer_ops toshiba_nand_manuf_ops;
-extern const struct nand_manufacturer_ops samsung_nand_manuf_ops;
-extern const struct nand_manufacturer_ops hynix_nand_manuf_ops;
-extern const struct nand_manufacturer_ops micron_nand_manuf_ops;
-extern const struct nand_manufacturer_ops amd_nand_manuf_ops;
-extern const struct nand_manufacturer_ops macronix_nand_manuf_ops;
-
 int nand_create_bbt(struct nand_chip *chip);
-int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs);
-int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs);
-int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt);
-int nand_erase_nand(struct mtd_info *mtd, struct erase_info *instr,
-		    int allowbbt);
-
-/**
- * struct platform_nand_chip - chip level device structure
- * @nr_chips:		max. number of chips to scan for
- * @chip_offset:	chip number offset
- * @nr_partitions:	number of partitions pointed to by partitions (or zero)
- * @partitions:		mtd partition list
- * @chip_delay:		R/B delay value in us
- * @options:		Option flags, e.g. 16bit buswidth
- * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
- * @part_probe_types:	NULL-terminated array of probe types
- */
-struct platform_nand_chip {
-	int nr_chips;
-	int chip_offset;
-	int nr_partitions;
-	struct mtd_partition *partitions;
-	int chip_delay;
-	unsigned int options;
-	unsigned int bbt_options;
-	const char **part_probe_types;
-};
-
-/* Keep gcc happy */
-struct platform_device;
-
-/**
- * struct platform_nand_ctrl - controller level device structure
- * @probe:		platform specific function to probe/setup hardware
- * @remove:		platform specific function to remove/teardown hardware
- * @dev_ready:		platform specific function to read ready/busy pin
- * @select_chip:	platform specific chip select function
- * @cmd_ctrl:		platform specific function for controlling
- *			ALE/CLE/nCE. Also used to write command and address
- * @write_buf:		platform specific function for write buffer
- * @read_buf:		platform specific function for read buffer
- * @priv:		private data to transport driver specific settings
- *
- * All fields are optional and depend on the hardware driver requirements
- */
-struct platform_nand_ctrl {
-	int (*probe)(struct platform_device *pdev);
-	void (*remove)(struct platform_device *pdev);
-	int (*dev_ready)(struct mtd_info *mtd);
-	void (*select_chip)(struct mtd_info *mtd, int chip);
-	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
-	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
-	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
-	void *priv;
-};
-
-/**
- * struct platform_nand_data - container structure for platform-specific data
- * @chip:		chip level chip structure
- * @ctrl:		controller level device structure
- */
-struct platform_nand_data {
-	struct platform_nand_chip chip;
-	struct platform_nand_ctrl ctrl;
-};
-
-/* return the supported asynchronous timing mode. */
-static inline int onfi_get_async_timing_mode(struct nand_chip *chip)
-{
-	if (!chip->parameters.onfi)
-		return ONFI_TIMING_MODE_UNKNOWN;
-
-	return chip->parameters.onfi->async_timing_mode;
-}
-
-int onfi_fill_data_interface(struct nand_chip *chip,
-			     enum nand_data_interface_type type,
-			     int timing_mode);
 
 /*
  * Check if it is a SLC nand.
@@ -1658,9 +1263,6 @@ static inline int nand_opcode_8bits(unsigned int command)
 	return 0;
 }
 
-/* get timing characteristics from ONFI timing mode. */
-const struct nand_sdr_timings *onfi_async_timing_mode_to_sdr_timings(int mode);
-
 int nand_check_erased_ecc_chunk(void *data, int datalen,
 				void *ecc, int ecclen,
 				void *extraoob, int extraooblen,
@@ -1670,37 +1272,22 @@ int nand_ecc_choose_conf(struct nand_chip *chip,
 			 const struct nand_ecc_caps *caps, int oobavail);
 
 /* Default write_oob implementation */
-int nand_write_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
-
-/* Default write_oob syndrome implementation */
-int nand_write_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-			    int page);
+int nand_write_oob_std(struct nand_chip *chip, int page);
 
 /* Default read_oob implementation */
-int nand_read_oob_std(struct mtd_info *mtd, struct nand_chip *chip, int page);
+int nand_read_oob_std(struct nand_chip *chip, int page);
 
-/* Default read_oob syndrome implementation */
-int nand_read_oob_syndrome(struct mtd_info *mtd, struct nand_chip *chip,
-			   int page);
-
-/* Wrapper to use in order for controllers/vendors to GET/SET FEATURES */
-int nand_get_features(struct nand_chip *chip, int addr, u8 *subfeature_param);
-int nand_set_features(struct nand_chip *chip, int addr, u8 *subfeature_param);
 /* Stub used by drivers that do not support GET/SET FEATURES operations */
-int nand_get_set_features_notsupp(struct mtd_info *mtd, struct nand_chip *chip,
-				  int addr, u8 *subfeature_param);
+int nand_get_set_features_notsupp(struct nand_chip *chip, int addr,
+				  u8 *subfeature_param);
 
 /* Default read_page_raw implementation */
-int nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-		       uint8_t *buf, int oob_required, int page);
-int nand_read_page_raw_notsupp(struct mtd_info *mtd, struct nand_chip *chip,
-			       u8 *buf, int oob_required, int page);
+int nand_read_page_raw(struct nand_chip *chip, uint8_t *buf, int oob_required,
+		       int page);
 
 /* Default write_page_raw implementation */
-int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip,
-			const uint8_t *buf, int oob_required, int page);
-int nand_write_page_raw_notsupp(struct mtd_info *mtd, struct nand_chip *chip,
-				const u8 *buf, int oob_required, int page);
+int nand_write_page_raw(struct nand_chip *chip, const uint8_t *buf,
+			int oob_required, int page);
 
 /* Reset and initialize a NAND device */
 int nand_reset(struct nand_chip *chip, int chipnr);
@@ -1710,7 +1297,6 @@ int nand_reset_op(struct nand_chip *chip);
 int nand_readid_op(struct nand_chip *chip, u8 addr, void *buf,
 		   unsigned int len);
 int nand_status_op(struct nand_chip *chip, u8 *status);
-int nand_exit_status_op(struct nand_chip *chip);
 int nand_erase_op(struct nand_chip *chip, unsigned int eraseblock);
 int nand_read_page_op(struct nand_chip *chip, unsigned int page,
 		      unsigned int offset_in_page, void *buf, unsigned int len);
@@ -1734,16 +1320,25 @@ int nand_read_data_op(struct nand_chip *chip, void *buf, unsigned int len,
 int nand_write_data_op(struct nand_chip *chip, const void *buf,
 		       unsigned int len, bool force_8bit);
 
+/* Scan and identify a NAND device */
+int nand_scan_with_ids(struct nand_chip *chip, unsigned int max_chips,
+		       struct nand_flash_dev *ids);
+
+static inline int nand_scan(struct nand_chip *chip, unsigned int max_chips)
+{
+	return nand_scan_with_ids(chip, max_chips, NULL);
+}
+
+/* Internal helper for board drivers which need to override command function */
+void nand_wait_ready(struct nand_chip *chip);
+
 /*
  * Free resources held by the NAND device, must be called on error after a
  * sucessful nand_scan().
  */
 void nand_cleanup(struct nand_chip *chip);
 /* Unregister the MTD device and calls nand_cleanup() */
-void nand_release(struct mtd_info *mtd);
-
-/* Default extended ID decoding function */
-void nand_decode_ext_id(struct nand_chip *chip);
+void nand_release(struct nand_chip *chip);
 
 /*
  * External helper for controller drivers that have to implement the WAITRDY