Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

1 files changed, 88 insertions, 17 deletions

diff --git a/include/linux/phylink.h b/include/linux/phylink.h
index 02ff1419d4be..a8e876317e25 100644
--- a/include/linux/phylink.h
+++ b/include/linux/phylink.h
@@ -80,7 +80,9 @@ struct phylink_config {
  * struct phylink_mac_ops - MAC operations structure.
  * @validate: Validate and update the link configuration.
  * @mac_pcs_get_state: Read the current link state from the hardware.
+ * @mac_prepare: prepare for a major reconfiguration of the interface.
  * @mac_config: configure the MAC for the selected mode and state.
+ * @mac_finish: finish a major reconfiguration of the interface.
  * @mac_an_restart: restart 802.3z BaseX autonegotiation.
  * @mac_link_down: take the link down.
  * @mac_link_up: allow the link to come up.
@@ -93,8 +95,12 @@ struct phylink_mac_ops {
 			 struct phylink_link_state *state);
 	void (*mac_pcs_get_state)(struct phylink_config *config,
 				  struct phylink_link_state *state);
+	int (*mac_prepare)(struct phylink_config *config, unsigned int mode,
+			   phy_interface_t iface);
 	void (*mac_config)(struct phylink_config *config, unsigned int mode,
 			   const struct phylink_link_state *state);
+	int (*mac_finish)(struct phylink_config *config, unsigned int mode,
+			  phy_interface_t iface);
 	void (*mac_an_restart)(struct phylink_config *config);
 	void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
 			      phy_interface_t interface);
@@ -150,6 +156,31 @@ void mac_pcs_get_state(struct phylink_config *config,
 		       struct phylink_link_state *state);
 
 /**
+ * mac_prepare() - prepare to change the PHY interface mode
+ * @config: a pointer to a &struct phylink_config.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @iface: interface mode to switch to
+ *
+ * phylink will call this method at the beginning of a full initialisation
+ * of the link, which includes changing the interface mode or at initial
+ * startup time. It may be called for the current mode. The MAC driver
+ * should perform whatever actions are required, e.g. disabling the
+ * Serdes PHY.
+ *
+ * This will be the first call in the sequence:
+ * - mac_prepare()
+ * - mac_config()
+ * - pcs_config()
+ * - possible pcs_an_restart()
+ * - mac_finish()
+ *
+ * Returns zero on success, or negative errno on failure which will be
+ * reported to the kernel log.
+ */
+int mac_prepare(struct phylink_config *config, unsigned int mode,
+		phy_interface_t iface);
+
+/**
  * mac_config() - configure the MAC for the selected mode and state
  * @config: a pointer to a &struct phylink_config.
  * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
@@ -225,6 +256,23 @@ void mac_config(struct phylink_config *config, unsigned int mode,
 		const struct phylink_link_state *state);
 
 /**
+ * mac_finish() - finish a to change the PHY interface mode
+ * @config: a pointer to a &struct phylink_config.
+ * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
+ * @iface: interface mode to switch to
+ *
+ * phylink will call this if it called mac_prepare() to allow the MAC to
+ * complete any necessary steps after the MAC and PCS have been configured
+ * for the @mode and @iface. E.g. a MAC driver may wish to re-enable the
+ * Serdes PHY here if it was previously disabled by mac_prepare().
+ *
+ * Returns zero on success, or negative errno on failure which will be
+ * reported to the kernel log.
+ */
+int mac_finish(struct phylink_config *config, unsigned int mode,
+		phy_interface_t iface);
+
+/**
  * mac_an_restart() - restart 802.3z BaseX autonegotiation
  * @config: a pointer to a &struct phylink_config.
  */
@@ -277,6 +325,21 @@ void mac_link_up(struct phylink_config *config, struct phy_device *phy,
 		 int speed, int duplex, bool tx_pause, bool rx_pause);
 #endif
 
+struct phylink_pcs_ops;
+
+/**
+ * struct phylink_pcs - PHYLINK PCS instance
+ * @ops: a pointer to the &struct phylink_pcs_ops structure
+ * @poll: poll the PCS for link changes
+ *
+ * This structure is designed to be embedded within the PCS private data,
+ * and will be passed between phylink and the PCS.
+ */
+struct phylink_pcs {
+	const struct phylink_pcs_ops *ops;
+	bool poll;
+};
+
 /**
  * struct phylink_pcs_ops - MAC PCS operations structure.
  * @pcs_get_state: read the current MAC PCS link state from the hardware.
@@ -286,20 +349,21 @@ void mac_link_up(struct phylink_config *config, struct phy_device *phy,
  *               (where necessary).
  */
 struct phylink_pcs_ops {
-	void (*pcs_get_state)(struct phylink_config *config,
+	void (*pcs_get_state)(struct phylink_pcs *pcs,
 			      struct phylink_link_state *state);
-	int (*pcs_config)(struct phylink_config *config, unsigned int mode,
+	int (*pcs_config)(struct phylink_pcs *pcs, unsigned int mode,
 			  phy_interface_t interface,
-			  const unsigned long *advertising);
-	void (*pcs_an_restart)(struct phylink_config *config);
-	void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
+			  const unsigned long *advertising,
+			  bool permit_pause_to_mac);
+	void (*pcs_an_restart)(struct phylink_pcs *pcs);
+	void (*pcs_link_up)(struct phylink_pcs *pcs, unsigned int mode,
 			    phy_interface_t interface, int speed, int duplex);
 };
 
 #if 0 /* For kernel-doc purposes only. */
 /**
  * pcs_get_state() - Read the current inband link state from the hardware
- * @config: a pointer to a &struct phylink_config.
+ * @pcs: a pointer to a &struct phylink_pcs.
  * @state: a pointer to a &struct phylink_link_state.
  *
  * Read the current inband link state from the MAC PCS, reporting the
@@ -312,18 +376,20 @@ struct phylink_pcs_ops {
  * When present, this overrides mac_pcs_get_state() in &struct
  * phylink_mac_ops.
  */
-void pcs_get_state(struct phylink_config *config,
+void pcs_get_state(struct phylink_pcs *pcs,
 		   struct phylink_link_state *state);
 
 /**
  * pcs_config() - Configure the PCS mode and advertisement
- * @config: a pointer to a &struct phylink_config.
+ * @pcs: a pointer to a &struct phylink_pcs.
  * @mode: one of %MLO_AN_FIXED, %MLO_AN_PHY, %MLO_AN_INBAND.
  * @interface: interface mode to be used
  * @advertising: adertisement ethtool link mode mask
+ * @permit_pause_to_mac: permit forwarding pause resolution to MAC
  *
  * Configure the PCS for the operating mode, the interface mode, and set
- * the advertisement mask.
+ * the advertisement mask. @permit_pause_to_mac indicates whether the
+ * hardware may forward the pause mode resolution to the MAC.
  *
  * When operating in %MLO_AN_INBAND, inband should always be enabled,
  * otherwise inband should be disabled.
@@ -335,21 +401,21 @@ void pcs_get_state(struct phylink_config *config,
  *
  * For most 10GBASE-R, there is no advertisement.
  */
-int (*pcs_config)(struct phylink_config *config, unsigned int mode,
-		  phy_interface_t interface, const unsigned long *advertising);
+int pcs_config(struct phylink_pcs *pcs, unsigned int mode,
+	       phy_interface_t interface, const unsigned long *advertising);
 
 /**
  * pcs_an_restart() - restart 802.3z BaseX autonegotiation
- * @config: a pointer to a &struct phylink_config.
+ * @pcs: a pointer to a &struct phylink_pcs.
  *
  * When PCS ops are present, this overrides mac_an_restart() in &struct
  * phylink_mac_ops.
  */
-void (*pcs_an_restart)(struct phylink_config *config);
+void pcs_an_restart(struct phylink_pcs *pcs);
 
 /**
  * pcs_link_up() - program the PCS for the resolved link configuration
- * @config: a pointer to a &struct phylink_config.
+ * @pcs: a pointer to a &struct phylink_pcs.
  * @mode: link autonegotiation mode
  * @interface: link &typedef phy_interface_t mode
  * @speed: link speed
@@ -360,14 +426,14 @@ void (*pcs_an_restart)(struct phylink_config *config);
  * mode without in-band AN needs to be manually configured for the link
  * and duplex setting. Otherwise, this should be a no-op.
  */
-void (*pcs_link_up)(struct phylink_config *config, unsigned int mode,
-		    phy_interface_t interface, int speed, int duplex);
+void pcs_link_up(struct phylink_pcs *pcs, unsigned int mode,
+		 phy_interface_t interface, int speed, int duplex);
 #endif
 
 struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
 			       phy_interface_t iface,
 			       const struct phylink_mac_ops *mac_ops);
-void phylink_add_pcs(struct phylink *, const struct phylink_pcs_ops *ops);
+void phylink_set_pcs(struct phylink *, struct phylink_pcs *pcs);
 void phylink_destroy(struct phylink *);
 
 int phylink_connect_phy(struct phylink *, struct phy_device *);
@@ -396,6 +462,8 @@ int phylink_init_eee(struct phylink *, bool);
 int phylink_ethtool_get_eee(struct phylink *, struct ethtool_eee *);
 int phylink_ethtool_set_eee(struct phylink *, struct ethtool_eee *);
 int phylink_mii_ioctl(struct phylink *, struct ifreq *, int);
+int phylink_speed_down(struct phylink *pl, bool sync);
+int phylink_speed_up(struct phylink *pl);
 
 #define phylink_zero(bm) \
 	bitmap_zero(bm, __ETHTOOL_LINK_MODE_MASK_NBITS)
@@ -414,6 +482,9 @@ void phylink_mii_c22_pcs_get_state(struct mdio_device *pcs,
 int phylink_mii_c22_pcs_set_advertisement(struct mdio_device *pcs,
 					  phy_interface_t interface,
 					  const unsigned long *advertising);
+int phylink_mii_c22_pcs_config(struct mdio_device *pcs, unsigned int mode,
+			       phy_interface_t interface,
+			       const unsigned long *advertising);
 void phylink_mii_c22_pcs_an_restart(struct mdio_device *pcs);
 
 void phylink_mii_c45_pcs_get_state(struct mdio_device *pcs,