Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-next

John W. Linville says:

====================
This pull request is intended for the 3.11 stream...

One big highlight is the cw1200 driver the ST-E CW1100 & CW1200
WLAN chipsets.  This one has been lingering for a while, lacking
some review comments.  Once started getting pulled into linux-next,
it got a bit more attention and a number of improvements were made
over the initial cut.  No doubt there will be more changes ahead,
but I think it is looking alright at this point.

Along with that, there is the usual flurry of updates to the mac80211
core and the iwlwifi, mwifiex, ath9k, rt2x00, wil6210, and other
drivers.  A few of the highlights are some rt2x00 refactoring/cleanup
by Gabor Juhos, some rt2800 hardware support enhancements by Stanislaw
Gruszka, some iwlwifi power management updates from Alexander Bondar,
some enhanced bcma SPROM support from Rafał Miłecki, and a variety
of other things here and there.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 81 insertions, 0 deletions

diff --git a/include/linux/platform_data/net-cw1200.h b/include/linux/platform_data/net-cw1200.h
new file mode 100644
index 000000000000..c6fbc3ce4ab0
--- /dev/null
+++ b/include/linux/platform_data/net-cw1200.h
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) ST-Ericsson SA 2011
+ *
+ * Author: Dmitry Tarnyagin <dmitry.tarnyagin@stericsson.com>
+ * License terms: GNU General Public License (GPL) version 2
+ */
+
+#ifndef CW1200_PLAT_H_INCLUDED
+#define CW1200_PLAT_H_INCLUDED
+
+struct cw1200_platform_data_spi {
+	u8 spi_bits_per_word;           /* REQUIRED */
+	u16 ref_clk;                    /* REQUIRED (in KHz) */
+
+	/* All others are optional */
+	bool have_5ghz;
+	int reset;                     /* GPIO to RSTn signal (0 disables) */
+	int powerup;                   /* GPIO to POWERUP signal (0 disables) */
+	int (*power_ctrl)(const struct cw1200_platform_data_spi *pdata,
+			  bool enable); /* Control 3v3 / 1v8 supply */
+	int (*clk_ctrl)(const struct cw1200_platform_data_spi *pdata,
+			bool enable); /* Control CLK32K */
+	const u8 *macaddr;  /* if NULL, use cw1200_mac_template module parameter */
+	const char *sdd_file;  /* if NULL, will use default for detected hw type */
+};
+
+struct cw1200_platform_data_sdio {
+	u16 ref_clk;                    /* REQUIRED (in KHz) */
+
+	/* All others are optional */
+	bool have_5ghz;
+	bool no_nptb;       /* SDIO hardware does not support non-power-of-2-blocksizes */
+	int reset;          /* GPIO to RSTn signal (0 disables) */
+	int powerup;        /* GPIO to POWERUP signal (0 disables) */
+	int irq;            /* IRQ line or 0 to use SDIO IRQ */
+	int (*power_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+			  bool enable); /* Control 3v3 / 1v8 supply */
+	int (*clk_ctrl)(const struct cw1200_platform_data_sdio *pdata,
+			bool enable); /* Control CLK32K */
+	const u8 *macaddr;  /* if NULL, use cw1200_mac_template module parameter */
+	const char *sdd_file;  /* if NULL, will use default for detected hw type */
+};
+
+
+/* An example of SPI support in your board setup file:
+
+   static struct cw1200_platform_data_spi cw1200_platform_data = {
+       .ref_clk = 38400,
+       .spi_bits_per_word = 16,
+       .reset = GPIO_RF_RESET,
+       .powerup = GPIO_RF_POWERUP,
+       .macaddr = wifi_mac_addr,
+       .sdd_file = "sdd_sagrad_1091_1098.bin",
+  };
+  static struct spi_board_info myboard_spi_devices[] __initdata = {
+       {
+               .modalias = "cw1200_wlan_spi",
+               .max_speed_hz = 52000000,
+               .bus_num = 0,
+               .irq = WIFI_IRQ,
+               .platform_data = &cw1200_platform_data,
+               .chip_select = 0,
+       },
+  };
+
+ */
+
+/* An example of SDIO support in your board setup file:
+
+  static struct cw1200_platform_data_sdio my_cw1200_platform_data = {
+	.ref_clk = 38400,
+	.have_5ghz = false,
+	.sdd_file = "sdd_myplatform.bin",
+  };
+  cw1200_sdio_set_platform_data(&my_cw1200_platform_data);
+
+ */
+
+void __init cw1200_sdio_set_platform_data(struct cw1200_platform_data_sdio *pdata);
+
+#endif /* CW1200_PLAT_H_INCLUDED */