Merge branch 'fixes-rc1' into fixes

12 files changed, 10 insertions, 129 deletions

diff --git a/include/linux/platform_data/asoc-mx27vis.h b/include/linux/platform_data/asoc-mx27vis.h
deleted file mode 100644
index 2107d0d992dd..000000000000
--- a/include/linux/platform_data/asoc-mx27vis.h
+++ /dev/null
@@ -1,12 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-#ifndef __PLATFORM_DATA_ASOC_MX27VIS_H
-#define __PLATFORM_DATA_ASOC_MX27VIS_H
-
-struct snd_mx27vis_platform_data {
-	int amp_gain0_gpio;
-	int amp_gain1_gpio;
-	int amp_mutel_gpio;
-	int amp_muter_gpio;
-};
-
-#endif /* __PLATFORM_DATA_ASOC_MX27VIS_H */
diff --git a/include/linux/platform_data/cros_ec_commands.h b/include/linux/platform_data/cros_ec_commands.h
index 5ff8597ceabd..45f53afc46e2 100644
--- a/include/linux/platform_data/cros_ec_commands.h
+++ b/include/linux/platform_data/cros_ec_commands.h
@@ -3467,6 +3467,7 @@ struct ec_response_get_next_event_v1 {
 #define EC_MKBP_LID_OPEN	0
 #define EC_MKBP_TABLET_MODE	1
 #define EC_MKBP_BASE_ATTACHED	2
+#define EC_MKBP_FRONT_PROXIMITY	3
 
 /* Run keyboard factory test scanning */
 #define EC_CMD_KEYBOARD_FACTORY_TEST 0x0068
@@ -5678,6 +5679,7 @@ enum tcpc_cc_polarity {
 
 #define PD_STATUS_EVENT_SOP_DISC_DONE		BIT(0)
 #define PD_STATUS_EVENT_SOP_PRIME_DISC_DONE	BIT(1)
+#define PD_STATUS_EVENT_HARD_RESET		BIT(2)
 
 struct ec_params_typec_status {
 	uint8_t port;
diff --git a/include/linux/platform_data/eth_ixp4xx.h b/include/linux/platform_data/eth_ixp4xx.h
index 6f652ea0c6ae..114b0940729f 100644
--- a/include/linux/platform_data/eth_ixp4xx.h
+++ b/include/linux/platform_data/eth_ixp4xx.h
@@ -14,6 +14,8 @@ struct eth_plat_info {
 	u8 rxq;		/* configurable, currently 0 - 31 only */
 	u8 txreadyq;
 	u8 hwaddr[6];
+	u8 npe;		/* NPE instance used by this interface */
+	bool has_mdio;	/* If this instance has an MDIO bus */
 };
 
 #endif
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index 8b30b14b47d3..f377817ce75c 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -85,6 +85,7 @@
  * omap2+ specific GPIO registers
  */
 #define OMAP24XX_GPIO_REVISION		0x0000
+#define OMAP24XX_GPIO_SYSCONFIG		0x0010
 #define OMAP24XX_GPIO_IRQSTATUS1	0x0018
 #define OMAP24XX_GPIO_IRQSTATUS2	0x0028
 #define OMAP24XX_GPIO_IRQENABLE2	0x002c
@@ -108,6 +109,7 @@
 #define OMAP24XX_GPIO_SETDATAOUT	0x0094
 
 #define OMAP4_GPIO_REVISION		0x0000
+#define OMAP4_GPIO_SYSCONFIG		0x0010
 #define OMAP4_GPIO_EOI			0x0020
 #define OMAP4_GPIO_IRQSTATUSRAW0	0x0024
 #define OMAP4_GPIO_IRQSTATUSRAW1	0x0028
@@ -148,6 +150,7 @@
 #ifndef __ASSEMBLER__
 struct omap_gpio_reg_offs {
 	u16 revision;
+	u16 sysconfig;
 	u16 direction;
 	u16 datain;
 	u16 dataout;
diff --git a/include/linux/platform_data/hirschmann-hellcreek.h b/include/linux/platform_data/hirschmann-hellcreek.h
index 388846766bb2..6a000df5541f 100644
--- a/include/linux/platform_data/hirschmann-hellcreek.h
+++ b/include/linux/platform_data/hirschmann-hellcreek.h
@@ -12,6 +12,7 @@
 #include <linux/types.h>
 
 struct hellcreek_platform_data {
+	const char *name;	/* Switch name */
 	int num_ports;		/* Amount of switch ports */
 	int is_100_mbits;	/* Is it configured to 100 or 1000 mbit/s */
 	int qbv_support;	/* Qbv support on front TSN ports */
diff --git a/include/linux/platform_data/i2c-designware.h b/include/linux/platform_data/i2c-designware.h
deleted file mode 100644
index 014c4a5a7e13..000000000000
--- a/include/linux/platform_data/i2c-designware.h
+++ /dev/null
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright(c) 2014 Intel Corporation.
- */
-
-#ifndef I2C_DESIGNWARE_H
-#define I2C_DESIGNWARE_H
-
-struct dw_i2c_platform_data {
-	unsigned int i2c_scl_freq;
-};
-
-#endif
diff --git a/include/linux/platform_data/invensense_mpu6050.h b/include/linux/platform_data/invensense_mpu6050.h
index 93974f4cfba1..f05b37521f67 100644
--- a/include/linux/platform_data/invensense_mpu6050.h
+++ b/include/linux/platform_data/invensense_mpu6050.h
@@ -12,7 +12,7 @@
  *			mounting matrix retrieved from device-tree)
  *
  * Contains platform specific information on how to configure the MPU6050 to
- * work on this platform.  The orientation matricies are 3x3 rotation matricies
+ * work on this platform.  The orientation matrices are 3x3 rotation matrices
  * that are applied to the data to rotate from the mounting orientation to the
  * platform orientation.  The values must be one of 0, 1, or -1 and each row and
  * column should have exactly 1 non-zero value.
diff --git a/include/linux/platform_data/media/camera-mx2.h b/include/linux/platform_data/media/camera-mx2.h
deleted file mode 100644
index 8cfa76b6e1e1..000000000000
--- a/include/linux/platform_data/media/camera-mx2.h
+++ /dev/null
@@ -1,31 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * mx2-cam.h - i.MX27/i.MX25 camera driver header file
- *
- * Copyright (C) 2003, Intel Corporation
- * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
- * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
- */
-
-#ifndef __MACH_MX2_CAM_H_
-#define __MACH_MX2_CAM_H_
-
-#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
-#define MX2_CAMERA_CCIR			(1 << 2)
-#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
-#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
-#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
-#define MX2_CAMERA_INV_DATA		(1 << 6)
-#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
-
-/**
- * struct mx2_camera_platform_data - optional platform data for mx2_camera
- * @flags: any combination of MX2_CAMERA_*
- * @clk: clock rate of the csi block / 2
- */
-struct mx2_camera_platform_data {
-	unsigned long flags;
-	unsigned long clk;
-};
-
-#endif /* __MACH_MX2_CAM_H_ */
diff --git a/include/linux/platform_data/media/camera-mx3.h b/include/linux/platform_data/media/camera-mx3.h
deleted file mode 100644
index 781c004e5596..000000000000
--- a/include/linux/platform_data/media/camera-mx3.h
+++ /dev/null
@@ -1,43 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- * mx3_camera.h - i.MX3x camera driver header file
- *
- * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
- */
-
-#ifndef _MX3_CAMERA_H_
-#define _MX3_CAMERA_H_
-
-#include <linux/device.h>
-
-#define MX3_CAMERA_CLK_SRC	1
-#define MX3_CAMERA_EXT_VSYNC	2
-#define MX3_CAMERA_DP		4
-#define MX3_CAMERA_PCP		8
-#define MX3_CAMERA_HSP		0x10
-#define MX3_CAMERA_VSP		0x20
-#define MX3_CAMERA_DATAWIDTH_4	0x40
-#define MX3_CAMERA_DATAWIDTH_8	0x80
-#define MX3_CAMERA_DATAWIDTH_10	0x100
-#define MX3_CAMERA_DATAWIDTH_15	0x200
-
-#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
-				   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
-
-struct v4l2_async_subdev;
-
-/**
- * struct mx3_camera_pdata - i.MX3x camera platform data
- * @flags:	MX3_CAMERA_* flags
- * @mclk_10khz:	master clock frequency in 10kHz units
- * @dma_dev:	IPU DMA device to match against in channel allocation
- */
-struct mx3_camera_pdata {
-	unsigned long flags;
-	unsigned long mclk_10khz;
-	struct device *dma_dev;
-	struct v4l2_async_subdev **asd;	/* Flat array, arranged in groups */
-	int *asd_sizes;			/* 0-terminated array of asd group sizes */
-};
-
-#endif
diff --git a/include/linux/platform_data/simplefb.h b/include/linux/platform_data/simplefb.h
index ca8337695c2a..27ea99af6e1d 100644
--- a/include/linux/platform_data/simplefb.h
+++ b/include/linux/platform_data/simplefb.h
@@ -16,6 +16,7 @@
 #define SIMPLEFB_FORMATS \
 { \
 	{ "r5g6b5", 16, {11, 5}, {5, 6}, {0, 5}, {0, 0}, DRM_FORMAT_RGB565 }, \
+	{ "r5g5b5a1", 16, {11, 5}, {6, 5}, {1, 5}, {0, 1}, DRM_FORMAT_RGBA5551 }, \
 	{ "x1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {0, 0}, DRM_FORMAT_XRGB1555 }, \
 	{ "a1r5g5b5", 16, {10, 5}, {5, 5}, {0, 5}, {15, 1}, DRM_FORMAT_ARGB1555 }, \
 	{ "r8g8b8", 24, {16, 8}, {8, 8}, {0, 8}, {0, 0}, DRM_FORMAT_RGB888 }, \
diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h
deleted file mode 100644
index 97a670f3d8fb..000000000000
--- a/include/linux/platform_data/usb-mx2.h
+++ /dev/null
@@ -1,29 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-or-later */
-/*
- *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
- */
-
-#ifndef __ASM_ARCH_MX21_USBH
-#define __ASM_ARCH_MX21_USBH
-
-enum mx21_usbh_xcvr {
-	/* Values below as used by hardware (HWMODE register) */
-	MX21_USBXCVR_TXDIF_RXDIF = 0,
-	MX21_USBXCVR_TXDIF_RXSE = 1,
-	MX21_USBXCVR_TXSE_RXDIF = 2,
-	MX21_USBXCVR_TXSE_RXSE = 3,
-};
-
-struct mx21_usbh_platform_data {
-	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
-	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
-	u16 	enable_host1:1,
-		enable_host2:1,
-		enable_otg_host:1, /* enable "OTG" port (as host) */
-		host1_xcverless:1, /* traceiverless host1 port */
-		host1_txenoe:1, /* output enable host1 transmit enable */
-		otg_ext_xcvr:1, /* external tranceiver for OTG port */
-		unused:10;
-};
-
-#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/include/linux/platform_data/intel-spi.h b/include/linux/platform_data/x86/intel-spi.h
index 7f53a5c6f35e..7f53a5c6f35e 100644
--- a/include/linux/platform_data/intel-spi.h
+++ b/include/linux/platform_data/x86/intel-spi.h