diff options
| author |   Yadwinder Singh Brar <yadi.brar01@gmail.com> | 2012-06-11 17:41:08 +0530 |
|---|---|---|
| committer |   Mark Brown <broonie@opensource.wolfsonmicro.com> | 2012-06-17 21:08:52 +0100 |
| commit | 6f0b2c696ca340cc2da381fe693fda3f8fdb2149 (patch) | |
| tree | 71814a0078daec92d97fd3a5651d083cfb424132 /include/linux/regulator | |
| parent | regulator: wm831x-dcdc: Convert wm831x_buckv_ops to set_voltage_sel and map_voltage (diff) | |
| download | linux-dev-6f0b2c696ca340cc2da381fe693fda3f8fdb2149.tar.xz linux-dev-6f0b2c696ca340cc2da381fe693fda3f8fdb2149.zip | |
regulator: Add ramp_delay configuration to constraints
For some hardwares ramp_delay for BUCKs is a configurable parameter which can
be configured through DT or board file.This patch adds ramp_delay to regulator
constraints and allow user to configure it for regulators which supports this
feature, through DT or board file. It will provide two ways of setting the
ramp_delay for a regulator:
First, by setting it as constraints in board file(for configurable
regulators) and set_machine_constraints() will take care of setting it on
hardware by calling(the provided) .set_ramp_delay() operation(callback).
Second, by setting it as data in regulator_desc(as fixed/default
ramp_delay rate) for a regulator in driver.
regulator_set_voltage_time_sel() will give preference to
constraints->ramp_delay while reading ramp_delay rate for regulator. Similarly
users should also take care accordingly while refering ramp_delay rate(in case
of implementing their private .set_voltage_time_sel() callbacks for different
regulators).
[Rewrote subject for 80 columns -- broonie]
Signed-off-by: Yadwinder Singh Brar <yadi.brar@samsung.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Diffstat (limited to 'include/linux/regulator')
| -rw-r--r-- | include/linux/regulator/driver.h | 3 | ||||
| -rw-r--r-- | include/linux/regulator/machine.h | 3 |
2 files changed, 6 insertions, 0 deletions
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index ae5c25379237..ddc155d262da 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -67,6 +67,8 @@ enum regulator_status { * * @enable_time: Time taken for the regulator voltage output voltage to * stabilise after being enabled, in microseconds. + * @set_ramp_delay: Set the ramp delay for the regulator. The driver should + * select ramp delay equal to or less than(closest) ramp_delay. * @set_voltage_time_sel: Time taken for the regulator voltage output voltage * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the @@ -113,6 +115,7 @@ struct regulator_ops { /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); + int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); int (*set_voltage_time_sel) (struct regulator_dev *, unsigned int old_selector, unsigned int new_selector); diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index b02108446be7..5f37ad3cc172 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -92,6 +92,7 @@ struct regulator_state { * mode. * @initial_state: Suspend state to set by default. * @initial_mode: Mode to set at startup. + * @ramp_delay: Time to settle down after voltage change (unit: mV/us) */ struct regulation_constraints { @@ -125,6 +126,8 @@ struct regulation_constraints { /* mode to set on startup */ unsigned int initial_mode; + unsigned int ramp_delay; + /* constraint flags */ unsigned always_on:1; /* regulator never off when system is on */ unsigned boot_on:1; /* bootloader/firmware enabled regulator */ |