diff options
author | 2019-09-16 15:52:38 -0700 | |
---|---|---|
committer | 2019-09-16 15:52:38 -0700 | |
commit | 399eb9b6cbf31ff6ef91a6930e2e94c703d74078 (patch) | |
tree | 60c26e51c167efdfec5ab5821111df9ea90cbf7f /include/linux/scmi_protocol.h | |
parent | Merge tag 'armsoc-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc (diff) | |
parent | Merge tag 'qcom-drivers-for-5.4' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers (diff) | |
download | linux-dev-399eb9b6cbf31ff6ef91a6930e2e94c703d74078.tar.xz linux-dev-399eb9b6cbf31ff6ef91a6930e2e94c703d74078.zip |
Merge tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC driver updates from Arnd Bergmann:
"This contains driver changes that are tightly connected to SoC
specific code. Aside from smaller cleanups and bug fixes, here is a
list of the notable changes.
New device drivers:
- The Turris Mox router has a new "moxtet" bus driver for its
on-board pluggable extension bus. The same platform also gains a
firmware driver.
- The Samsung Exynos family gains a new Chipid driver exporting using
the soc device sysfs interface
- A similar socinfo driver for Qualcomm Snapdragon chips.
- A firmware driver for the NXP i.MX DSP IPC protocol using shared
memory and a mailbox
Other changes:
- The i.MX reset controller driver now supports the NXP i.MX8MM chip
- Amlogic SoC specific drivers gain support for the S905X3 and A311D
chips
- A rework of the TI Davinci framebuffer driver to allow important
cleanups in the platform code
- A couple of device drivers for removed ARM SoC platforms are
removed. Most of the removals were picked up by other maintainers,
this contains whatever was left"
* tag 'armsoc-drivers' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (123 commits)
bus: uniphier-system-bus: use devm_platform_ioremap_resource()
soc: ti: ti_sci_pm_domains: Add support for exclusive and shared access
dt-bindings: ti_sci_pm_domains: Add support for exclusive and shared access
firmware: ti_sci: Allow for device shared and exclusive requests
bus: imx-weim: remove incorrect __init annotations
fbdev: remove w90x900/nuc900 platform drivers
spi: remove w90x900 driver
net: remove w90p910-ether driver
net: remove ks8695 driver
firmware: turris-mox-rwtm: Add sysfs documentation
firmware: Add Turris Mox rWTM firmware driver
dt-bindings: firmware: Document cznic,turris-mox-rwtm binding
bus: moxtet: fix unsigned comparison to less than zero
bus: moxtet: remove set but not used variable 'dummy'
ARM: scoop: Use the right include
dt-bindings: power: add Amlogic Everything-Else power domains bindings
soc: amlogic: Add support for Everything-Else power domains controller
fbdev: da8xx: use resource management for dma
fbdev: da8xx-fb: drop a redundant if
fbdev: da8xx-fb: use devm_platform_ioremap_resource()
...
Diffstat (limited to 'include/linux/scmi_protocol.h')
-rw-r--r-- | include/linux/scmi_protocol.h | 46 |
1 files changed, 37 insertions, 9 deletions
diff --git a/include/linux/scmi_protocol.h b/include/linux/scmi_protocol.h index 9ff2e9357e9a..881fea47c83d 100644 --- a/include/linux/scmi_protocol.h +++ b/include/linux/scmi_protocol.h @@ -1,4 +1,4 @@ -// SPDX-License-Identifier: GPL-2.0 +/* SPDX-License-Identifier: GPL-2.0-only */ /* * SCMI Message Protocol driver header * @@ -71,7 +71,7 @@ struct scmi_clk_ops { int (*rate_get)(const struct scmi_handle *handle, u32 clk_id, u64 *rate); int (*rate_set)(const struct scmi_handle *handle, u32 clk_id, - u32 config, u64 rate); + u64 rate); int (*enable)(const struct scmi_handle *handle, u32 clk_id); int (*disable)(const struct scmi_handle *handle, u32 clk_id); }; @@ -145,6 +145,8 @@ struct scmi_sensor_info { u32 id; u8 type; s8 scale; + u8 num_trip_points; + bool async; char name[SCMI_MAX_STR_SIZE]; }; @@ -167,9 +169,9 @@ enum scmi_sensor_class { * * @count_get: get the count of sensors provided by SCMI * @info_get: get the information of the specified sensor - * @configuration_set: control notifications on cross-over events for + * @trip_point_notify: control notifications on cross-over events for * the trip-points - * @trip_point_set: selects and configures a trip-point of interest + * @trip_point_config: selects and configures a trip-point of interest * @reading_get: gets the current value of the sensor */ struct scmi_sensor_ops { @@ -177,12 +179,32 @@ struct scmi_sensor_ops { const struct scmi_sensor_info *(*info_get) (const struct scmi_handle *handle, u32 sensor_id); - int (*configuration_set)(const struct scmi_handle *handle, - u32 sensor_id); - int (*trip_point_set)(const struct scmi_handle *handle, u32 sensor_id, - u8 trip_id, u64 trip_value); + int (*trip_point_notify)(const struct scmi_handle *handle, + u32 sensor_id, bool enable); + int (*trip_point_config)(const struct scmi_handle *handle, + u32 sensor_id, u8 trip_id, u64 trip_value); int (*reading_get)(const struct scmi_handle *handle, u32 sensor_id, - bool async, u64 *value); + u64 *value); +}; + +/** + * struct scmi_reset_ops - represents the various operations provided + * by SCMI Reset Protocol + * + * @num_domains_get: get the count of reset domains provided by SCMI + * @name_get: gets the name of a reset domain + * @latency_get: gets the reset latency for the specified reset domain + * @reset: resets the specified reset domain + * @assert: explicitly assert reset signal of the specified reset domain + * @deassert: explicitly deassert reset signal of the specified reset domain + */ +struct scmi_reset_ops { + int (*num_domains_get)(const struct scmi_handle *handle); + char *(*name_get)(const struct scmi_handle *handle, u32 domain); + int (*latency_get)(const struct scmi_handle *handle, u32 domain); + int (*reset)(const struct scmi_handle *handle, u32 domain); + int (*assert)(const struct scmi_handle *handle, u32 domain); + int (*deassert)(const struct scmi_handle *handle, u32 domain); }; /** @@ -194,6 +216,7 @@ struct scmi_sensor_ops { * @perf_ops: pointer to set of performance protocol operations * @clk_ops: pointer to set of clock protocol operations * @sensor_ops: pointer to set of sensor protocol operations + * @reset_ops: pointer to set of reset protocol operations * @perf_priv: pointer to private data structure specific to performance * protocol(for internal use only) * @clk_priv: pointer to private data structure specific to clock @@ -202,6 +225,8 @@ struct scmi_sensor_ops { * protocol(for internal use only) * @sensor_priv: pointer to private data structure specific to sensors * protocol(for internal use only) + * @reset_priv: pointer to private data structure specific to reset + * protocol(for internal use only) */ struct scmi_handle { struct device *dev; @@ -210,11 +235,13 @@ struct scmi_handle { struct scmi_clk_ops *clk_ops; struct scmi_power_ops *power_ops; struct scmi_sensor_ops *sensor_ops; + struct scmi_reset_ops *reset_ops; /* for protocol internal use */ void *perf_priv; void *clk_priv; void *power_priv; void *sensor_priv; + void *reset_priv; }; enum scmi_std_protocol { @@ -224,6 +251,7 @@ enum scmi_std_protocol { SCMI_PROTOCOL_PERF = 0x13, SCMI_PROTOCOL_CLOCK = 0x14, SCMI_PROTOCOL_SENSOR = 0x15, + SCMI_PROTOCOL_RESET = 0x16, }; struct scmi_device { |