Merge git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6: (141 commits)
  USB: mct_u232: fix broken close
  USB: gadget: amd5536udc.c: fix error path
  USB: imx21-hcd - fix off by one resource size calculation
  usb: gadget: fix Kconfig warning
  usb: r8a66597-udc: Add processing when USB was removed.
  mxc_udc: add workaround for ENGcm09152 for i.MX35
  USB: ftdi_sio: add device ids for ScienceScope
  USB: musb: AM35x: Workaround for fifo read issue
  USB: musb: add musb support for AM35x
  USB: AM35x: Add musb support
  usb: Fix linker errors with CONFIG_PM=n
  USB: ohci-sh - use resource_size instead of defining its own resource_len macro
  USB: isp1362-hcd - use resource_size instead of defining its own resource_len macro
  USB: isp116x-hcd - use resource_size instead of defining its own resource_len macro
  USB: xhci: Fix compile error when CONFIG_PM=n
  USB: accept some invalid ep0-maxpacket values
  USB: xHCI: PCI power management implementation
  USB: xHCI: bus power management implementation
  USB: xHCI: port remote wakeup implementation
  USB: xHCI: port power management implementation
  ...

Manually fix up (non-data) conflict: the SCSI merge gad renamed the
'hw_sector_size' member to 'physical_block_size', and the USB tree
brought a new use of it.

1 files changed, 67 insertions, 1 deletions

diff --git a/include/linux/usb/ch9.h b/include/linux/usb/ch9.h
index da2ed77d3e8d..f917bbbc8901 100644
--- a/include/linux/usb/ch9.h
+++ b/include/linux/usb/ch9.h
@@ -123,8 +123,23 @@
 #define USB_DEVICE_A_ALT_HNP_SUPPORT	5	/* (otg) other RH port does */
 #define USB_DEVICE_DEBUG_MODE		6	/* (special devices only) */
 
+/*
+ * New Feature Selectors as added by USB 3.0
+ * See USB 3.0 spec Table 9-6
+ */
+#define USB_DEVICE_U1_ENABLE	48	/* dev may initiate U1 transition */
+#define USB_DEVICE_U2_ENABLE	49	/* dev may initiate U2 transition */
+#define USB_DEVICE_LTM_ENABLE	50	/* dev may send LTM */
+#define USB_INTRF_FUNC_SUSPEND	0	/* function suspend */
+
+#define USB_INTR_FUNC_SUSPEND_OPT_MASK	0xFF00
+
 #define USB_ENDPOINT_HALT		0	/* IN/OUT will STALL */
 
+/* Bit array elements as returned by the USB_REQ_GET_STATUS request. */
+#define USB_DEV_STAT_U1_ENABLED		2	/* transition into U1 state */
+#define USB_DEV_STAT_U2_ENABLED		3	/* transition into U2 state */
+#define USB_DEV_STAT_LTM_ENABLED	4	/* Latency tolerance messages */
 
 /**
  * struct usb_ctrlrequest - SETUP data for a USB device control request
@@ -675,6 +690,7 @@ struct usb_bos_descriptor {
 	__u8  bNumDeviceCaps;
 } __attribute__((packed));
 
+#define USB_DT_BOS_SIZE		5
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_DEVICE_CAPABILITY:  grouped with BOS */
@@ -712,16 +728,56 @@ struct usb_wireless_cap_descriptor {	/* Ultra Wide Band */
 	__u8  bReserved;
 } __attribute__((packed));
 
+/* USB 2.0 Extension descriptor */
 #define	USB_CAP_TYPE_EXT		2
 
 struct usb_ext_cap_descriptor {		/* Link Power Management */
 	__u8  bLength;
 	__u8  bDescriptorType;
 	__u8  bDevCapabilityType;
-	__u8  bmAttributes;
+	__le32 bmAttributes;
 #define USB_LPM_SUPPORT			(1 << 1)	/* supports LPM */
 } __attribute__((packed));
 
+#define USB_DT_USB_EXT_CAP_SIZE	7
+
+/*
+ * SuperSpeed USB Capability descriptor: Defines the set of SuperSpeed USB
+ * specific device level capabilities
+ */
+#define		USB_SS_CAP_TYPE		3
+struct usb_ss_cap_descriptor {		/* Link Power Management */
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bmAttributes;
+#define USB_LTM_SUPPORT			(1 << 1) /* supports LTM */
+	__le16 wSpeedSupported;
+#define USB_LOW_SPEED_OPERATION		(1)	 /* Low speed operation */
+#define USB_FULL_SPEED_OPERATION	(1 << 1) /* Full speed operation */
+#define USB_HIGH_SPEED_OPERATION	(1 << 2) /* High speed operation */
+#define USB_5GBPS_OPERATION		(1 << 3) /* Operation at 5Gbps */
+	__u8  bFunctionalitySupport;
+	__u8  bU1devExitLat;
+	__le16 bU2DevExitLat;
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CAP_SIZE	10
+
+/*
+ * Container ID Capability descriptor: Defines the instance unique ID used to
+ * identify the instance across all operating modes
+ */
+#define	CONTAINER_ID_TYPE	4
+struct usb_ss_container_id_descriptor {
+	__u8  bLength;
+	__u8  bDescriptorType;
+	__u8  bDevCapabilityType;
+	__u8  bReserved;
+	__u8  ContainerID[16]; /* 128-bit number */
+} __attribute__((packed));
+
+#define USB_DT_USB_SS_CONTN_ID_SIZE	20
 /*-------------------------------------------------------------------------*/
 
 /* USB_DT_WIRELESS_ENDPOINT_COMP:  companion descriptor associated with
@@ -808,4 +864,14 @@ enum usb_device_state {
 	 */
 };
 
+/*-------------------------------------------------------------------------*/
+
+/*
+ * As per USB compliance update, a device that is actively drawing
+ * more than 100mA from USB must report itself as bus-powered in
+ * the GetStatus(DEVICE) call.
+ * http://compliance.usb.org/index.asp?UpdateFile=Electrical&Format=Standard#34
+ */
+#define USB_SELF_POWER_VBUS_MAX_DRAW		100
+
 #endif /* __LINUX_USB_CH9_H */