usb: move r8a66597 register defines

Move r8a66597 hardware register definitions from the host
controller header file to the platform data header file.

With this change in place we can easily share register
definitions between the host controller driver and a future
gadget driver.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>

1 files changed, 370 insertions, 2 deletions

diff --git a/include/linux/usb/r8a66597.h b/include/linux/usb/r8a66597.h
index 460ee3f6a2c6..26d216734057 100644
--- a/include/linux/usb/r8a66597.h
+++ b/include/linux/usb/r8a66597.h
@@ -28,7 +28,7 @@
 #define R8A66597_PLATDATA_XTAL_48MHZ	0x03
 
 struct r8a66597_platdata {
-	/* This ops can controll port power instead of DVSTCTR register. */
+	/* This callback can control port power instead of DVSTCTR register. */
 	void (*port_power)(int port, int power);
 
 	/* set one = on chip controller, set zero = external controller */
@@ -43,5 +43,373 @@ struct r8a66597_platdata {
 	/* set one = big endian, set zero = little endian */
 	unsigned	endian:1;
 };
-#endif
+
+/* Register definitions */
+#define SYSCFG0		0x00
+#define SYSCFG1		0x02
+#define SYSSTS0		0x04
+#define SYSSTS1		0x06
+#define DVSTCTR0	0x08
+#define DVSTCTR1	0x0A
+#define TESTMODE	0x0C
+#define PINCFG		0x0E
+#define DMA0CFG		0x10
+#define DMA1CFG		0x12
+#define CFIFO		0x14
+#define D0FIFO		0x18
+#define D1FIFO		0x1C
+#define CFIFOSEL	0x20
+#define CFIFOCTR	0x22
+#define CFIFOSIE	0x24
+#define D0FIFOSEL	0x28
+#define D0FIFOCTR	0x2A
+#define D1FIFOSEL	0x2C
+#define D1FIFOCTR	0x2E
+#define INTENB0		0x30
+#define INTENB1		0x32
+#define INTENB2		0x34
+#define BRDYENB		0x36
+#define NRDYENB		0x38
+#define BEMPENB		0x3A
+#define SOFCFG		0x3C
+#define INTSTS0		0x40
+#define INTSTS1		0x42
+#define INTSTS2		0x44
+#define BRDYSTS		0x46
+#define NRDYSTS		0x48
+#define BEMPSTS		0x4A
+#define FRMNUM		0x4C
+#define UFRMNUM		0x4E
+#define USBADDR		0x50
+#define USBREQ		0x54
+#define USBVAL		0x56
+#define USBINDX		0x58
+#define USBLENG		0x5A
+#define DCPCFG		0x5C
+#define DCPMAXP		0x5E
+#define DCPCTR		0x60
+#define PIPESEL		0x64
+#define PIPECFG		0x68
+#define PIPEBUF		0x6A
+#define PIPEMAXP	0x6C
+#define PIPEPERI	0x6E
+#define PIPE1CTR	0x70
+#define PIPE2CTR	0x72
+#define PIPE3CTR	0x74
+#define PIPE4CTR	0x76
+#define PIPE5CTR	0x78
+#define PIPE6CTR	0x7A
+#define PIPE7CTR	0x7C
+#define PIPE8CTR	0x7E
+#define PIPE9CTR	0x80
+#define PIPE1TRE	0x90
+#define PIPE1TRN	0x92
+#define PIPE2TRE	0x94
+#define PIPE2TRN	0x96
+#define PIPE3TRE	0x98
+#define PIPE3TRN	0x9A
+#define PIPE4TRE	0x9C
+#define	PIPE4TRN	0x9E
+#define	PIPE5TRE	0xA0
+#define	PIPE5TRN	0xA2
+#define DEVADD0		0xD0
+#define DEVADD1		0xD2
+#define DEVADD2		0xD4
+#define DEVADD3		0xD6
+#define DEVADD4		0xD8
+#define DEVADD5		0xDA
+#define DEVADD6		0xDC
+#define DEVADD7		0xDE
+#define DEVADD8		0xE0
+#define DEVADD9		0xE2
+#define DEVADDA		0xE4
+
+/* System Configuration Control Register */
+#define	XTAL		0xC000	/* b15-14: Crystal selection */
+#define	  XTAL48	 0x8000	  /* 48MHz */
+#define	  XTAL24	 0x4000	  /* 24MHz */
+#define	  XTAL12	 0x0000	  /* 12MHz */
+#define	XCKE		0x2000	/* b13: External clock enable */
+#define	PLLC		0x0800	/* b11: PLL control */
+#define	SCKE		0x0400	/* b10: USB clock enable */
+#define	PCSDIS		0x0200	/* b9: not CS wakeup */
+#define	LPSME		0x0100	/* b8: Low power sleep mode */
+#define	HSE		0x0080	/* b7: Hi-speed enable */
+#define	DCFM		0x0040	/* b6: Controller function select  */
+#define	DRPD		0x0020	/* b5: D+/- pull down control */
+#define	DPRPU		0x0010	/* b4: D+ pull up control */
+#define	USBE		0x0001	/* b0: USB module operation enable */
+
+/* System Configuration Status Register */
+#define	OVCBIT		0x8000	/* b15-14: Over-current bit */
+#define	OVCMON		0xC000	/* b15-14: Over-current monitor */
+#define	SOFEA		0x0020	/* b5: SOF monitor */
+#define	IDMON		0x0004	/* b3: ID-pin monitor */
+#define	LNST		0x0003	/* b1-0: D+, D- line status */
+#define	  SE1		 0x0003	  /* SE1 */
+#define	  FS_KSTS	 0x0002	  /* Full-Speed K State */
+#define	  FS_JSTS	 0x0001	  /* Full-Speed J State */
+#define	  LS_JSTS	 0x0002	  /* Low-Speed J State */
+#define	  LS_KSTS	 0x0001	  /* Low-Speed K State */
+#define	  SE0		 0x0000	  /* SE0 */
+
+/* Device State Control Register */
+#define	EXTLP0		0x0400	/* b10: External port */
+#define	VBOUT		0x0200	/* b9: VBUS output */
+#define	WKUP		0x0100	/* b8: Remote wakeup */
+#define	RWUPE		0x0080	/* b7: Remote wakeup sense */
+#define	USBRST		0x0040	/* b6: USB reset enable */
+#define	RESUME		0x0020	/* b5: Resume enable */
+#define	UACT		0x0010	/* b4: USB bus enable */
+#define	RHST		0x0007	/* b1-0: Reset handshake status */
+#define	  HSPROC	 0x0004	  /* HS handshake is processing */
+#define	  HSMODE	 0x0003	  /* Hi-Speed mode */
+#define	  FSMODE	 0x0002	  /* Full-Speed mode */
+#define	  LSMODE	 0x0001	  /* Low-Speed mode */
+#define	  UNDECID	 0x0000	  /* Undecided */
+
+/* Test Mode Register */
+#define	UTST			0x000F	/* b3-0: Test select */
+#define	  H_TST_PACKET		 0x000C	  /* HOST TEST Packet */
+#define	  H_TST_SE0_NAK		 0x000B	  /* HOST TEST SE0 NAK */
+#define	  H_TST_K		 0x000A	  /* HOST TEST K */
+#define	  H_TST_J		 0x0009	  /* HOST TEST J */
+#define	  H_TST_NORMAL		 0x0000	  /* HOST Normal Mode */
+#define	  P_TST_PACKET		 0x0004	  /* PERI TEST Packet */
+#define	  P_TST_SE0_NAK		 0x0003	  /* PERI TEST SE0 NAK */
+#define	  P_TST_K		 0x0002	  /* PERI TEST K */
+#define	  P_TST_J		 0x0001	  /* PERI TEST J */
+#define	  P_TST_NORMAL		 0x0000	  /* PERI Normal Mode */
+
+/* Data Pin Configuration Register */
+#define	LDRV			0x8000	/* b15: Drive Current Adjust */
+#define	  VIF1			  0x0000		/* VIF = 1.8V */
+#define	  VIF3			  0x8000		/* VIF = 3.3V */
+#define	INTA			0x0001	/* b1: USB INT-pin active */
+
+/* DMAx Pin Configuration Register */
+#define	DREQA			0x4000	/* b14: Dreq active select */
+#define	BURST			0x2000	/* b13: Burst mode */
+#define	DACKA			0x0400	/* b10: Dack active select */
+#define	DFORM			0x0380	/* b9-7: DMA mode select */
+#define	  CPU_ADR_RD_WR		 0x0000	  /* Address + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_RD_WR	 0x0100	  /* DACK + RD/WR mode (CPU bus) */
+#define	  CPU_DACK_ONLY		 0x0180	  /* DACK only mode (CPU bus) */
+#define	  SPLIT_DACK_ONLY	 0x0200	  /* DACK only mode (SPLIT bus) */
+#define	DENDA			0x0040	/* b6: Dend active select */
+#define	PKTM			0x0020	/* b5: Packet mode */
+#define	DENDE			0x0010	/* b4: Dend enable */
+#define	OBUS			0x0004	/* b2: OUTbus mode */
+
+/* CFIFO/DxFIFO Port Select Register */
+#define	RCNT		0x8000	/* b15: Read count mode */
+#define	REW		0x4000	/* b14: Buffer rewind */
+#define	DCLRM		0x2000	/* b13: DMA buffer clear mode */
+#define	DREQE		0x1000	/* b12: DREQ output enable */
+#define	  MBW_8		 0x0000	  /*  8bit */
+#define	  MBW_16	 0x0400	  /* 16bit */
+#define	  MBW_32	 0x0800   /* 32bit */
+#define	BIGEND		0x0100	/* b8: Big endian mode */
+#define	  BYTE_LITTLE	 0x0000		/* little dendian */
+#define	  BYTE_BIG	 0x0100		/* big endifan */
+#define	ISEL		0x0020	/* b5: DCP FIFO port direction select */
+#define	CURPIPE		0x000F	/* b2-0: PIPE select */
+
+/* CFIFO/DxFIFO Port Control Register */
+#define	BVAL		0x8000	/* b15: Buffer valid flag */
+#define	BCLR		0x4000	/* b14: Buffer clear */
+#define	FRDY		0x2000	/* b13: FIFO ready */
+#define	DTLN		0x0FFF	/* b11-0: FIFO received data length */
+
+/* Interrupt Enable Register 0 */
+#define	VBSE	0x8000	/* b15: VBUS interrupt */
+#define	RSME	0x4000	/* b14: Resume interrupt */
+#define	SOFE	0x2000	/* b13: Frame update interrupt */
+#define	DVSE	0x1000	/* b12: Device state transition interrupt */
+#define	CTRE	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMPE	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDYE	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDYE	0x0100	/* b8: Buffer ready interrupt */
+
+/* Interrupt Enable Register 1 */
+#define	OVRCRE		0x8000	/* b15: Over-current interrupt */
+#define	BCHGE		0x4000	/* b14: USB us chenge interrupt */
+#define	DTCHE		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCHE		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERRE		0x0040	/* b6: EOF error interrupt */
+#define	SIGNE		0x0020	/* b5: SETUP IGNORE interrupt */
+#define	SACKE		0x0010	/* b4: SETUP ACK interrupt */
+
+/* BRDY Interrupt Enable/Status Register */
+#define	BRDY9		0x0200	/* b9: PIPE9 */
+#define	BRDY8		0x0100	/* b8: PIPE8 */
+#define	BRDY7		0x0080	/* b7: PIPE7 */
+#define	BRDY6		0x0040	/* b6: PIPE6 */
+#define	BRDY5		0x0020	/* b5: PIPE5 */
+#define	BRDY4		0x0010	/* b4: PIPE4 */
+#define	BRDY3		0x0008	/* b3: PIPE3 */
+#define	BRDY2		0x0004	/* b2: PIPE2 */
+#define	BRDY1		0x0002	/* b1: PIPE1 */
+#define	BRDY0		0x0001	/* b1: PIPE0 */
+
+/* NRDY Interrupt Enable/Status Register */
+#define	NRDY9		0x0200	/* b9: PIPE9 */
+#define	NRDY8		0x0100	/* b8: PIPE8 */
+#define	NRDY7		0x0080	/* b7: PIPE7 */
+#define	NRDY6		0x0040	/* b6: PIPE6 */
+#define	NRDY5		0x0020	/* b5: PIPE5 */
+#define	NRDY4		0x0010	/* b4: PIPE4 */
+#define	NRDY3		0x0008	/* b3: PIPE3 */
+#define	NRDY2		0x0004	/* b2: PIPE2 */
+#define	NRDY1		0x0002	/* b1: PIPE1 */
+#define	NRDY0		0x0001	/* b1: PIPE0 */
+
+/* BEMP Interrupt Enable/Status Register */
+#define	BEMP9		0x0200	/* b9: PIPE9 */
+#define	BEMP8		0x0100	/* b8: PIPE8 */
+#define	BEMP7		0x0080	/* b7: PIPE7 */
+#define	BEMP6		0x0040	/* b6: PIPE6 */
+#define	BEMP5		0x0020	/* b5: PIPE5 */
+#define	BEMP4		0x0010	/* b4: PIPE4 */
+#define	BEMP3		0x0008	/* b3: PIPE3 */
+#define	BEMP2		0x0004	/* b2: PIPE2 */
+#define	BEMP1		0x0002	/* b1: PIPE1 */
+#define	BEMP0		0x0001	/* b0: PIPE0 */
+
+/* SOF Pin Configuration Register */
+#define	TRNENSEL	0x0100	/* b8: Select transaction enable period */
+#define	BRDYM		0x0040	/* b6: BRDY clear timing */
+#define	INTL		0x0020	/* b5: Interrupt sense select */
+#define	EDGESTS		0x0010	/* b4:  */
+#define	SOFMODE		0x000C	/* b3-2: SOF pin select */
+#define	  SOF_125US	 0x0008	  /* SOF OUT 125us Frame Signal */
+#define	  SOF_1MS	 0x0004	  /* SOF OUT 1ms Frame Signal */
+#define	  SOF_DISABLE	 0x0000	  /* SOF OUT Disable */
+
+/* Interrupt Status Register 0 */
+#define	VBINT	0x8000	/* b15: VBUS interrupt */
+#define	RESM	0x4000	/* b14: Resume interrupt */
+#define	SOFR	0x2000	/* b13: SOF frame update interrupt */
+#define	DVST	0x1000	/* b12: Device state transition interrupt */
+#define	CTRT	0x0800	/* b11: Control transfer stage transition interrupt */
+#define	BEMP	0x0400	/* b10: Buffer empty interrupt */
+#define	NRDY	0x0200	/* b9: Buffer not ready interrupt */
+#define	BRDY	0x0100	/* b8: Buffer ready interrupt */
+#define	VBSTS	0x0080	/* b7: VBUS input port */
+#define	DVSQ	0x0070	/* b6-4: Device state */
+#define	  DS_SPD_CNFG	 0x0070	  /* Suspend Configured */
+#define	  DS_SPD_ADDR	 0x0060	  /* Suspend Address */
+#define	  DS_SPD_DFLT	 0x0050	  /* Suspend Default */
+#define	  DS_SPD_POWR	 0x0040	  /* Suspend Powered */
+#define	  DS_SUSP	 0x0040	  /* Suspend */
+#define	  DS_CNFG	 0x0030	  /* Configured */
+#define	  DS_ADDS	 0x0020	  /* Address */
+#define	  DS_DFLT	 0x0010	  /* Default */
+#define	  DS_POWR	 0x0000	  /* Powered */
+#define	DVSQS		0x0030	/* b5-4: Device state */
+#define	VALID		0x0008	/* b3: Setup packet detected flag */
+#define	CTSQ		0x0007	/* b2-0: Control transfer stage */
+#define	  CS_SQER	 0x0006	  /* Sequence error */
+#define	  CS_WRND	 0x0005	  /* Control write nodata status stage */
+#define	  CS_WRSS	 0x0004	  /* Control write status stage */
+#define	  CS_WRDS	 0x0003	  /* Control write data stage */
+#define	  CS_RDSS	 0x0002	  /* Control read status stage */
+#define	  CS_RDDS	 0x0001	  /* Control read data stage */
+#define	  CS_IDST	 0x0000	  /* Idle or setup stage */
+
+/* Interrupt Status Register 1 */
+#define	OVRCR		0x8000	/* b15: Over-current interrupt */
+#define	BCHG		0x4000	/* b14: USB bus chenge interrupt */
+#define	DTCH		0x1000	/* b12: Detach sense interrupt */
+#define	ATTCH		0x0800	/* b11: Attach sense interrupt */
+#define	EOFERR		0x0040	/* b6: EOF-error interrupt */
+#define	SIGN		0x0020	/* b5: Setup ignore interrupt */
+#define	SACK		0x0010	/* b4: Setup acknowledge interrupt */
+
+/* Frame Number Register */
+#define	OVRN		0x8000	/* b15: Overrun error */
+#define	CRCE		0x4000	/* b14: Received data error */
+#define	FRNM		0x07FF	/* b10-0: Frame number */
+
+/* Micro Frame Number Register */
+#define	UFRNM		0x0007	/* b2-0: Micro frame number */
+
+/* Default Control Pipe Maxpacket Size Register */
+/* Pipe Maxpacket Size Register */
+#define	DEVSEL	0xF000	/* b15-14: Device address select */
+#define	MAXP	0x007F	/* b6-0: Maxpacket size of default control pipe */
+
+/* Default Control Pipe Control Register */
+#define	BSTS		0x8000	/* b15: Buffer status */
+#define	SUREQ		0x4000	/* b14: Send USB request  */
+#define	CSCLR		0x2000	/* b13: complete-split status clear */
+#define	CSSTS		0x1000	/* b12: complete-split status */
+#define	SUREQCLR	0x0800	/* b11: stop setup request */
+#define	SQCLR		0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET		0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON		0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY		0x0020	/* b5: pipe busy */
+#define	PINGE		0x0010	/* b4: ping enable */
+#define	CCPL		0x0004	/* b2: Enable control transfer complete */
+#define	PID		0x0003	/* b1-0: Response PID */
+#define	  PID_STALL11	 0x0003	  /* STALL */
+#define	  PID_STALL	 0x0002	  /* STALL */
+#define	  PID_BUF	 0x0001	  /* BUF */
+#define	  PID_NAK	 0x0000	  /* NAK */
+
+/* Pipe Window Select Register */
+#define	PIPENM		0x0007	/* b2-0: Pipe select */
+
+/* Pipe Configuration Register */
+#define	R8A66597_TYP	0xC000	/* b15-14: Transfer type */
+#define	  R8A66597_ISO	 0xC000		  /* Isochronous */
+#define	  R8A66597_INT	 0x8000		  /* Interrupt */
+#define	  R8A66597_BULK	 0x4000		  /* Bulk */
+#define	R8A66597_BFRE	0x0400	/* b10: Buffer ready interrupt mode select */
+#define	R8A66597_DBLB	0x0200	/* b9: Double buffer mode select */
+#define	R8A66597_CNTMD	0x0100	/* b8: Continuous transfer mode select */
+#define	R8A66597_SHTNAK	0x0080	/* b7: Transfer end NAK */
+#define	R8A66597_DIR	0x0010	/* b4: Transfer direction select */
+#define	R8A66597_EPNUM	0x000F	/* b3-0: Eendpoint number select */
+
+/* Pipe Buffer Configuration Register */
+#define	BUFSIZE		0x7C00	/* b14-10: Pipe buffer size */
+#define	BUFNMB		0x007F	/* b6-0: Pipe buffer number */
+#define	PIPE0BUF	256
+#define	PIPExBUF	64
+
+/* Pipe Maxpacket Size Register */
+#define	MXPS		0x07FF	/* b10-0: Maxpacket size */
+
+/* Pipe Cycle Configuration Register */
+#define	IFIS	0x1000	/* b12: Isochronous in-buffer flush mode select */
+#define	IITV	0x0007	/* b2-0: Isochronous interval */
+
+/* Pipex Control Register */
+#define	BSTS	0x8000	/* b15: Buffer status */
+#define	INBUFM	0x4000	/* b14: IN buffer monitor (Only for PIPE1 to 5) */
+#define	CSCLR	0x2000	/* b13: complete-split status clear */
+#define	CSSTS	0x1000	/* b12: complete-split status */
+#define	ATREPM	0x0400	/* b10: Auto repeat mode */
+#define	ACLRM	0x0200	/* b9: Out buffer auto clear mode */
+#define	SQCLR	0x0100	/* b8: Sequence toggle bit clear */
+#define	SQSET	0x0080	/* b7: Sequence toggle bit set */
+#define	SQMON	0x0040	/* b6: Sequence toggle bit monitor */
+#define	PBUSY	0x0020	/* b5: pipe busy */
+#define	PID	0x0003	/* b1-0: Response PID */
+
+/* PIPExTRE */
+#define	TRENB		0x0200	/* b9: Transaction counter enable */
+#define	TRCLR		0x0100	/* b8: Transaction counter clear */
+
+/* PIPExTRN */
+#define	TRNCNT		0xFFFF	/* b15-0: Transaction counter */
+
+/* DEVADDx */
+#define	UPPHUB		0x7800
+#define	HUBPORT		0x0700
+#define	USBSPD		0x00C0
+#define	RTPORT		0x0001
+
+#endif /* __LINUX_USB_R8A66597_H */