Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Fix interrupt name truncation in mv88e6xxx dsa driver, from Andrew
    Lunn.

 2) Process generic XDP even if SKB is cloned, from Toke Høiland-Jørgensen.

 3) Fix leak of kernel memory to userspace in smc, from Eric Dumazet.

 4) Add some missing netlink attribute validation to matchall and
    flower, from Davide Caratti.

 5) Send icmp responses properly when NAT has been applied to the frame
    before we get to the tunnel emitting the icmp, from Jason Donenfeld.

 6) Make sure there is enough SKB headroom when adding dsa tags for qca
    and ar9331. From Per Forlin.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (62 commits)
  netdevice.h: fix all kernel-doc and Sphinx warnings
  net: dsa: tag_ar9331: Make sure there is headroom for tag
  net: dsa: tag_qca: Make sure there is headroom for tag
  net, ip6_tunnel: enhance tunnel locate with link check
  net/smc: no peer ID in CLC decline for SMCD
  net/smc: transfer fasync_list in case of fallback
  net: hns3: fix a copying IPv6 address error in hclge_fd_get_flow_tuples()
  net: hns3: fix VF bandwidth does not take effect in some case
  net: hns3: add management table after IMP reset
  mac80211: fix wrong 160/80+80 MHz setting
  cfg80211: add missing policy for NL80211_ATTR_STATUS_CODE
  xfrm: interface: use icmp_ndo_send helper
  wireguard: device: use icmp_ndo_send helper
  sunvnet: use icmp_ndo_send helper
  gtp: use icmp_ndo_send helper
  icmp: introduce helper for nat'd source address in network device context
  net/sched: flower: add missing validation of TCA_FLOWER_FLAGS
  net/sched: matchall: add missing validation of TCA_MATCHALL_FLAGS
  net/flow_dissector: remove unexist field description
  page_pool: refill page when alloc.count of pool is zero
  ...

2 files changed, 21 insertions, 1 deletions

diff --git a/include/linux/icmpv6.h b/include/linux/icmpv6.h
index ef1cbb5f454f..93338fd54af8 100644
--- a/include/linux/icmpv6.h
+++ b/include/linux/icmpv6.h
@@ -31,6 +31,12 @@ static inline void icmpv6_send(struct sk_buff *skb,
 }
 #endif
 
+#if IS_ENABLED(CONFIG_NF_NAT)
+void icmpv6_ndo_send(struct sk_buff *skb_in, u8 type, u8 code, __u32 info);
+#else
+#define icmpv6_ndo_send icmpv6_send
+#endif
+
 extern int				icmpv6_init(void);
 extern int				icmpv6_err_convert(u8 type, u8 code,
 							   int *err);
diff --git a/include/linux/netdevice.h b/include/linux/netdevice.h
index a9c6b5c61d27..9f1f633235f6 100644
--- a/include/linux/netdevice.h
+++ b/include/linux/netdevice.h
@@ -1616,6 +1616,7 @@ enum netdev_priv_flags {
  *				and drivers will need to set them appropriately.
  *
  *	@mpls_features:	Mask of features inheritable by MPLS
+ *	@gso_partial_features: value(s) from NETIF_F_GSO\*
  *
  *	@ifindex:	interface index
  *	@group:		The group the device belongs to
@@ -1640,8 +1641,11 @@ enum netdev_priv_flags {
  *	@netdev_ops:	Includes several pointers to callbacks,
  *			if one wants to override the ndo_*() functions
  *	@ethtool_ops:	Management operations
+ *	@l3mdev_ops:	Layer 3 master device operations
  *	@ndisc_ops:	Includes callbacks for different IPv6 neighbour
  *			discovery handling. Necessary for e.g. 6LoWPAN.
+ *	@xfrmdev_ops:	Transformation offload operations
+ *	@tlsdev_ops:	Transport Layer Security offload operations
  *	@header_ops:	Includes callbacks for creating,parsing,caching,etc
  *			of Layer 2 headers.
  *
@@ -1680,6 +1684,7 @@ enum netdev_priv_flags {
  * 	@dev_port:		Used to differentiate devices that share
  * 				the same function
  *	@addr_list_lock:	XXX: need comments on this one
+ *	@name_assign_type:	network interface name assignment type
  *	@uc_promisc:		Counter that indicates promiscuous mode
  *				has been enabled due to the need to listen to
  *				additional unicast addresses in a device that
@@ -1702,6 +1707,9 @@ enum netdev_priv_flags {
  *	@ip6_ptr:	IPv6 specific data
  *	@ax25_ptr:	AX.25 specific data
  *	@ieee80211_ptr:	IEEE 802.11 specific data, assign before registering
+ *	@ieee802154_ptr: IEEE 802.15.4 low-rate Wireless Personal Area Network
+ *			 device struct
+ *	@mpls_ptr:	mpls_dev struct pointer
  *
  *	@dev_addr:	Hw address (before bcast,
  *			because most packets are unicast)
@@ -1710,6 +1718,8 @@ enum netdev_priv_flags {
  *	@num_rx_queues:		Number of RX queues
  *				allocated at register_netdev() time
  *	@real_num_rx_queues: 	Number of RX queues currently active in device
+ *	@xdp_prog:		XDP sockets filter program pointer
+ *	@gro_flush_timeout:	timeout for GRO layer in NAPI
  *
  *	@rx_handler:		handler for received packets
  *	@rx_handler_data: 	XXX: need comments on this one
@@ -1731,10 +1741,14 @@ enum netdev_priv_flags {
  *	@qdisc:			Root qdisc from userspace point of view
  *	@tx_queue_len:		Max frames per queue allowed
  *	@tx_global_lock: 	XXX: need comments on this one
+ *	@xdp_bulkq:		XDP device bulk queue
+ *	@xps_cpus_map:		all CPUs map for XPS device
+ *	@xps_rxqs_map:		all RXQs map for XPS device
  *
  *	@xps_maps:	XXX: need comments on this one
  *	@miniq_egress:		clsact qdisc specific data for
  *				egress processing
+ *	@qdisc_hash:		qdisc hash table
  *	@watchdog_timeo:	Represents the timeout that is used by
  *				the watchdog (see dev_watchdog())
  *	@watchdog_timer:	List of timers
@@ -3548,7 +3562,7 @@ static inline unsigned int netif_attrmask_next(int n, const unsigned long *srcp,
 }
 
 /**
- *	netif_attrmask_next_and - get the next CPU/Rx queue in *src1p & *src2p
+ *	netif_attrmask_next_and - get the next CPU/Rx queue in \*src1p & \*src2p
  *	@n: CPU/Rx queue index
  *	@src1p: the first CPUs/Rx queues mask pointer
  *	@src2p: the second CPUs/Rx queues mask pointer