Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

 1) Seccomp BPF filters can now be JIT'd, from Alexei Starovoitov.

 2) Multiqueue support in xen-netback and xen-netfront, from Andrew J
    Benniston.

 3) Allow tweaking of aggregation settings in cdc_ncm driver, from Bjørn
    Mork.

 4) BPF now has a "random" opcode, from Chema Gonzalez.

 5) Add more BPF documentation and improve test framework, from Daniel
    Borkmann.

 6) Support TCP fastopen over ipv6, from Daniel Lee.

 7) Add software TSO helper functions and use them to support software
    TSO in mvneta and mv643xx_eth drivers.  From Ezequiel Garcia.

 8) Support software TSO in fec driver too, from Nimrod Andy.

 9) Add Broadcom SYSTEMPORT driver, from Florian Fainelli.

10) Handle broadcasts more gracefully over macvlan when there are large
    numbers of interfaces configured, from Herbert Xu.

11) Allow more control over fwmark used for non-socket based responses,
    from Lorenzo Colitti.

12) Do TCP congestion window limiting based upon measurements, from Neal
    Cardwell.

13) Support busy polling in SCTP, from Neal Horman.

14) Allow RSS key to be configured via ethtool, from Venkata Duvvuru.

15) Bridge promisc mode handling improvements from Vlad Yasevich.

16) Don't use inetpeer entries to implement ID generation any more, it
    performs poorly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1522 commits)
  rtnetlink: fix userspace API breakage for iproute2 < v3.9.0
  tcp: fixing TLP's FIN recovery
  net: fec: Add software TSO support
  net: fec: Add Scatter/gather support
  net: fec: Increase buffer descriptor entry number
  net: fec: Factorize feature setting
  net: fec: Enable IP header hardware checksum
  net: fec: Factorize the .xmit transmit function
  bridge: fix compile error when compiling without IPv6 support
  bridge: fix smatch warning / potential null pointer dereference
  via-rhine: fix full-duplex with autoneg disable
  bnx2x: Enlarge the dorq threshold for VFs
  bnx2x: Check for UNDI in uncommon branch
  bnx2x: Fix 1G-baseT link
  bnx2x: Fix link for KR with swapped polarity lane
  sctp: Fix sk_ack_backlog wrap-around problem
  net/core: Add VF link state control policy
  net/fsl: xgmac_mdio is dependent on OF_MDIO
  net/fsl: Make xgmac_mdio read error message useful
  net_sched: drr: warn when qdisc is not work conserving
  ...

1 files changed, 139 insertions, 16 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 8248e3909fdf..421b6ecb4b2c 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -189,6 +189,43 @@ struct ieee80211_chanctx_conf {
 };
 
 /**
+ * enum ieee80211_chanctx_switch_mode - channel context switch mode
+ * @CHANCTX_SWMODE_REASSIGN_VIF: Both old and new contexts already
+ *	exist (and will continue to exist), but the virtual interface
+ *	needs to be switched from one to the other.
+ * @CHANCTX_SWMODE_SWAP_CONTEXTS: The old context exists but will stop
+ *      to exist with this call, the new context doesn't exist but
+ *      will be active after this call, the virtual interface switches
+ *      from the old to the new (note that the driver may of course
+ *      implement this as an on-the-fly chandef switch of the existing
+ *      hardware context, but the mac80211 pointer for the old context
+ *      will cease to exist and only the new one will later be used
+ *      for changes/removal.)
+ */
+enum ieee80211_chanctx_switch_mode {
+	CHANCTX_SWMODE_REASSIGN_VIF,
+	CHANCTX_SWMODE_SWAP_CONTEXTS,
+};
+
+/**
+ * struct ieee80211_vif_chanctx_switch - vif chanctx switch information
+ *
+ * This is structure is used to pass information about a vif that
+ * needs to switch from one chanctx to another.  The
+ * &ieee80211_chanctx_switch_mode defines how the switch should be
+ * done.
+ *
+ * @vif: the vif that should be switched from old_ctx to new_ctx
+ * @old_ctx: the old context to which the vif was assigned
+ * @new_ctx: the new context to which the vif must be assigned
+ */
+struct ieee80211_vif_chanctx_switch {
+	struct ieee80211_vif *vif;
+	struct ieee80211_chanctx_conf *old_ctx;
+	struct ieee80211_chanctx_conf *new_ctx;
+};
+
+/**
  * enum ieee80211_bss_change - BSS change notification flags
  *
  * These flags are used with the bss_info_changed() callback
@@ -1113,7 +1150,9 @@ enum ieee80211_vif_flags {
  * @addr: address of this interface
  * @p2p: indicates whether this AP or STA interface is a p2p
  *	interface, i.e. a GO or p2p-sta respectively
- * @csa_active: marks whether a channel switch is going on
+ * @csa_active: marks whether a channel switch is going on. Internally it is
+ *	write-protected by sdata_lock and local->mtx so holding either is fine
+ *	for read access.
  * @driver_flags: flags/capabilities the driver has for this interface,
  *	these need to be set (or cleared) when the interface is added
  *	or, if supported by the driver, the interface type is changed
@@ -1202,14 +1241,18 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  *	fall back to software crypto. Note that this flag deals only with
  *	RX, if your crypto engine can't deal with TX you can also set the
  *	%IEEE80211_KEY_FLAG_SW_MGMT_TX flag to encrypt such frames in SW.
+ * @IEEE80211_KEY_FLAG_GENERATE_IV_MGMT: This flag should be set by the
+ *	driver for a CCMP key to indicate that is requires IV generation
+ *	only for managment frames (MFP).
  */
 enum ieee80211_key_flags {
-	IEEE80211_KEY_FLAG_GENERATE_IV	= 1<<1,
-	IEEE80211_KEY_FLAG_GENERATE_MMIC= 1<<2,
-	IEEE80211_KEY_FLAG_PAIRWISE	= 1<<3,
-	IEEE80211_KEY_FLAG_SW_MGMT_TX	= 1<<4,
-	IEEE80211_KEY_FLAG_PUT_IV_SPACE = 1<<5,
-	IEEE80211_KEY_FLAG_RX_MGMT	= 1<<6,
+	IEEE80211_KEY_FLAG_GENERATE_IV_MGMT	= BIT(0),
+	IEEE80211_KEY_FLAG_GENERATE_IV		= BIT(1),
+	IEEE80211_KEY_FLAG_GENERATE_MMIC	= BIT(2),
+	IEEE80211_KEY_FLAG_PAIRWISE		= BIT(3),
+	IEEE80211_KEY_FLAG_SW_MGMT_TX		= BIT(4),
+	IEEE80211_KEY_FLAG_PUT_IV_SPACE		= BIT(5),
+	IEEE80211_KEY_FLAG_RX_MGMT		= BIT(6),
 };
 
 /**
@@ -1370,6 +1413,7 @@ struct ieee80211_sta_rates {
  *	the station moves to associated state.
  * @smps_mode: current SMPS mode (off, static or dynamic)
  * @rates: rate control selection table
+ * @tdls: indicates whether the STA is a TDLS peer
  */
 struct ieee80211_sta {
 	u32 supp_rates[IEEE80211_NUM_BANDS];
@@ -1384,6 +1428,7 @@ struct ieee80211_sta {
 	enum ieee80211_sta_rx_bandwidth bandwidth;
 	enum ieee80211_smps_mode smps_mode;
 	struct ieee80211_sta_rates __rcu *rates;
+	bool tdls;
 
 	/* must be last */
 	u8 drv_priv[0] __aligned(sizeof(void *));
@@ -1555,6 +1600,12 @@ struct ieee80211_tx_control {
  *	for a single active channel while using channel contexts. When support
  *	is not enabled the default action is to disconnect when getting the
  *	CSA frame.
+ *
+ * @IEEE80211_HW_CHANGE_RUNNING_CHANCTX: The hardware can change a
+ *	channel context on-the-fly.  This is needed for channel switch
+ *	on single-channel hardware.  It can also be used as an
+ *	optimization in certain channel switch cases with
+ *	multi-channel.
  */
 enum ieee80211_hw_flags {
 	IEEE80211_HW_HAS_RATE_CONTROL			= 1<<0,
@@ -1586,6 +1637,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
 	IEEE80211_HW_CHANCTX_STA_CSA			= 1<<28,
+	IEEE80211_HW_CHANGE_RUNNING_CHANCTX		= 1<<29,
 };
 
 /**
@@ -2609,6 +2661,7 @@ enum ieee80211_roc_type {
  *	of queues to flush, which is useful if different virtual interfaces
  *	use different hardware queues; it may also indicate all queues.
  *	If the parameter @drop is set to %true, pending frames may be dropped.
+ *	Note that vif can be NULL.
  *	The callback can sleep.
  *
  * @channel_switch: Drivers that need (or want) to offload the channel
@@ -2720,6 +2773,11 @@ enum ieee80211_roc_type {
  *	to vif. Possible use is for hw queue remapping.
  * @unassign_vif_chanctx: Notifies device driver about channel context being
  *	unbound from vif.
+ * @switch_vif_chanctx: switch a number of vifs from one chanctx to
+ *	another, as specified in the list of
+ *	@ieee80211_vif_chanctx_switch passed to the driver, according
+ *	to the mode defined in &ieee80211_chanctx_switch_mode.
+ *
  * @start_ap: Start operation on the AP interface, this is called after all the
  *	information in bss_conf is set and beacon can be retrieved. A channel
  *	context is bound before this is called. Note that if the driver uses
@@ -2753,6 +2811,10 @@ enum ieee80211_roc_type {
  *	information in bss_conf is set up and the beacon can be retrieved. A
  *	channel context is bound before this is called.
  * @leave_ibss: Leave the IBSS again.
+ *
+ * @get_expected_throughput: extract the expected throughput towards the
+ *	specified station. The returned value is expressed in Kbps. It returns 0
+ *	if the RC algorithm does not have proper data to provide.
  */
 struct ieee80211_ops {
 	void (*tx)(struct ieee80211_hw *hw,
@@ -2871,7 +2933,8 @@ struct ieee80211_ops {
 			     struct netlink_callback *cb,
 			     void *data, int len);
 #endif
-	void (*flush)(struct ieee80211_hw *hw, u32 queues, bool drop);
+	void (*flush)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
+		      u32 queues, bool drop);
 	void (*channel_switch)(struct ieee80211_hw *hw,
 			       struct ieee80211_channel_switch *ch_switch);
 	int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant);
@@ -2931,6 +2994,10 @@ struct ieee80211_ops {
 	void (*unassign_vif_chanctx)(struct ieee80211_hw *hw,
 				     struct ieee80211_vif *vif,
 				     struct ieee80211_chanctx_conf *ctx);
+	int (*switch_vif_chanctx)(struct ieee80211_hw *hw,
+				  struct ieee80211_vif_chanctx_switch *vifs,
+				  int n_vifs,
+				  enum ieee80211_chanctx_switch_mode mode);
 
 	void (*restart_complete)(struct ieee80211_hw *hw);
 
@@ -2945,6 +3012,7 @@ struct ieee80211_ops {
 
 	int (*join_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
 	void (*leave_ibss)(struct ieee80211_hw *hw, struct ieee80211_vif *vif);
+	u32 (*get_expected_throughput)(struct ieee80211_sta *sta);
 };
 
 /**
@@ -3394,6 +3462,47 @@ void ieee80211_tx_status_irqsafe(struct ieee80211_hw *hw,
  */
 void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
 
+#define IEEE80211_MAX_CSA_COUNTERS_NUM 2
+
+/**
+ * struct ieee80211_mutable_offsets - mutable beacon offsets
+ * @tim_offset: position of TIM element
+ * @tim_length: size of TIM element
+ * @csa_counter_offs: array of IEEE80211_MAX_CSA_COUNTERS_NUM offsets
+ *	to CSA counters.  This array can contain zero values which
+ *	should be ignored.
+ */
+struct ieee80211_mutable_offsets {
+	u16 tim_offset;
+	u16 tim_length;
+
+	u16 csa_counter_offs[IEEE80211_MAX_CSA_COUNTERS_NUM];
+};
+
+/**
+ * ieee80211_beacon_get_template - beacon template generation function
+ * @hw: pointer obtained from ieee80211_alloc_hw().
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ * @offs: &struct ieee80211_mutable_offsets pointer to struct that will
+ *	receive the offsets that may be updated by the driver.
+ *
+ * If the driver implements beaconing modes, it must use this function to
+ * obtain the beacon template.
+ *
+ * This function should be used if the beacon frames are generated by the
+ * device, and then the driver must use the returned beacon as the template
+ * The driver or the device are responsible to update the DTIM and, when
+ * applicable, the CSA count.
+ *
+ * The driver is responsible for freeing the returned skb.
+ *
+ * Return: The beacon template. %NULL on error.
+ */
+struct sk_buff *
+ieee80211_beacon_get_template(struct ieee80211_hw *hw,
+			      struct ieee80211_vif *vif,
+			      struct ieee80211_mutable_offsets *offs);
+
 /**
  * ieee80211_beacon_get_tim - beacon generation function
  * @hw: pointer obtained from ieee80211_alloc_hw().
@@ -3405,16 +3514,12 @@ void ieee80211_report_low_ack(struct ieee80211_sta *sta, u32 num_packets);
  *	Set to 0 if invalid (in non-AP modes).
  *
  * If the driver implements beaconing modes, it must use this function to
- * obtain the beacon frame/template.
+ * obtain the beacon frame.
  *
  * If the beacon frames are generated by the host system (i.e., not in
  * hardware/firmware), the driver uses this function to get each beacon
- * frame from mac80211 -- it is responsible for calling this function
- * before the beacon is needed (e.g. based on hardware interrupt).
- *
- * If the beacon frames are generated by the device, then the driver
- * must use the returned beacon as the template and change the TIM IE
- * according to the current DTIM parameters/TIM bitmap.
+ * frame from mac80211 -- it is responsible for calling this function exactly
+ * once before the beacon is needed (e.g. based on hardware interrupt).
  *
  * The driver is responsible for freeing the returned skb.
  *
@@ -3440,6 +3545,20 @@ static inline struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw,
 }
 
 /**
+ * ieee80211_csa_update_counter - request mac80211 to decrement the csa counter
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * The csa counter should be updated after each beacon transmission.
+ * This function is called implicitly when
+ * ieee80211_beacon_get/ieee80211_beacon_get_tim are called, however if the
+ * beacon frames are generated by the device, the driver should call this
+ * function after each beacon transmission to sync mac80211's csa counters.
+ *
+ * Return: new csa counter value
+ */
+u8 ieee80211_csa_update_counter(struct ieee80211_vif *vif);
+
+/**
  * ieee80211_csa_finish - notify mac80211 about channel switch
  * @vif: &struct ieee80211_vif pointer from the add_interface callback.
  *
@@ -4467,6 +4586,8 @@ struct rate_control_ops {
 	void (*add_sta_debugfs)(void *priv, void *priv_sta,
 				struct dentry *dir);
 	void (*remove_sta_debugfs)(void *priv, void *priv_sta);
+
+	u32 (*get_expected_throughput)(void *priv_sta);
 };
 
 static inline int rate_supported(struct ieee80211_sta *sta,
@@ -4576,7 +4697,9 @@ conf_is_ht40(struct ieee80211_conf *conf)
 static inline bool
 conf_is_ht(struct ieee80211_conf *conf)
 {
-	return conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT;
+	return (conf->chandef.width != NL80211_CHAN_WIDTH_5) &&
+		(conf->chandef.width != NL80211_CHAN_WIDTH_10) &&
+		(conf->chandef.width != NL80211_CHAN_WIDTH_20_NOHT);
 }
 
 static inline enum nl80211_iftype