Merge tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next

Johannes Berg says:

====================
brcmfmac
 * add BCM43454/6 support

rtw89
 * add support for 160 MHz channels and 6 GHz band
 * hardware scan support

iwlwifi
 * support UHB TAS enablement via BIOS
 * remove a bunch of W=1 warnings
 * add support for channel switch offload
 * support 32 Rx AMPDU sessions in newer devices
 * add support for a couple of new devices
 * add support for band disablement via BIOS

mt76
 * mt7915 thermal management improvements
 * SAR support for more mt76 drivers
 * mt7986 wmac support on mt7915

ath11k
 * debugfs interface to configure firmware debug log level
 * debugfs interface to test Target Wake Time (TWT)
 * provide 802.11ax High Efficiency (HE) data via radiotap

ath9k
 * use hw_random API instead of directly dumping into random.c

wcn36xx
 * fix wcn3660 to work on 5 GHz band

ath6kl
 * add device ID for WLU5150-D81

cfg80211/mac80211
 * initial EHT (from 802.11be) support
   (EHT rates, 320 MHz, larger block-ack)
 * support disconnect on HW restart

* tag 'wireless-next-2022-03-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (247 commits)
  mac80211: Add support to trigger sta disconnect on hardware restart
  mac80211: fix potential double free on mesh join
  mac80211: correct legacy rates check in ieee80211_calc_rx_airtime
  nl80211: fix typo of NL80211_IF_TYPE_OCB in documentation
  mac80211: Use GFP_KERNEL instead of GFP_ATOMIC when possible
  mac80211: replace DEFINE_SIMPLE_ATTRIBUTE with DEFINE_DEBUGFS_ATTRIBUTE
  rtw89: 8852c: process logic efuse map
  rtw89: 8852c: process efuse of phycap
  rtw89: support DAV efuse reading operation
  rtw89: 8852c: add chip::dle_mem
  rtw89: add page_regs to handle v1 chips
  rtw89: add chip_info::{h2c,c2h}_reg to support more chips
  rtw89: add hci_func_en_addr to support variant generation
  rtw89: add power_{on/off}_func
  rtw89: read chip version depends on chip ID
  rtw89: pci: use a struct to describe all registers address related to DMA channel
  rtw89: pci: add V1 of PCI channel address
  rtw89: pci: add struct rtw89_pci_info
  rtw89: 8852c: add 8852c empty files
  MAINTAINERS: add devicetree bindings entry for mt76
  ...

====================

Link: https://lore.kernel.org/r/20220311124029.213470-1-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

2 files changed, 102 insertions, 1 deletions

diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index f6db085ff3df..68713388b617 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -109,7 +109,12 @@ struct wiphy;
  *	on this channel.
  * @IEEE80211_CHAN_16MHZ: 16 MHz bandwidth is permitted
  *	on this channel.
- *
+ * @IEEE80211_CHAN_NO_320MHZ: If the driver supports 320 MHz on the band,
+ *	this flag indicates that a 320 MHz channel cannot use this
+ *	channel as the control or any of the secondary channels.
+ *	This may be due to the driver or due to regulatory bandwidth
+ *	restrictions.
+ * @IEEE80211_CHAN_NO_EHT: EHT operation is not permitted on this channel.
  */
 enum ieee80211_channel_flags {
 	IEEE80211_CHAN_DISABLED		= 1<<0,
@@ -131,6 +136,8 @@ enum ieee80211_channel_flags {
 	IEEE80211_CHAN_4MHZ		= 1<<16,
 	IEEE80211_CHAN_8MHZ		= 1<<17,
 	IEEE80211_CHAN_16MHZ		= 1<<18,
+	IEEE80211_CHAN_NO_320MHZ	= 1<<19,
+	IEEE80211_CHAN_NO_EHT		= 1<<20,
 };
 
 #define IEEE80211_CHAN_NO_HT40 \
@@ -361,6 +368,48 @@ struct ieee80211_sta_he_cap {
 };
 
 /**
+ * struct ieee80211_eht_mcs_nss_supp - EHT max supported NSS per MCS
+ *
+ * See P802.11be_D1.3 Table 9-401k - "Subfields of the Supported EHT-MCS
+ * and NSS Set field"
+ *
+ * @only_20mhz: MCS/NSS support for 20 MHz-only STA.
+ * @bw._80: MCS/NSS support for BW <= 80 MHz
+ * @bw._160: MCS/NSS support for BW = 160 MHz
+ * @bw._320: MCS/NSS support for BW = 320 MHz
+ */
+struct ieee80211_eht_mcs_nss_supp {
+	union {
+		struct ieee80211_eht_mcs_nss_supp_20mhz_only only_20mhz;
+		struct {
+			struct ieee80211_eht_mcs_nss_supp_bw _80;
+			struct ieee80211_eht_mcs_nss_supp_bw _160;
+			struct ieee80211_eht_mcs_nss_supp_bw _320;
+		} __packed bw;
+	} __packed;
+} __packed;
+
+#define IEEE80211_EHT_PPE_THRES_MAX_LEN		32
+
+/**
+ * struct ieee80211_sta_eht_cap - STA's EHT capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11be EHT capabilities for a STA.
+ *
+ * @has_eht: true iff EHT data is valid.
+ * @eht_cap_elem: Fixed portion of the eht capabilities element.
+ * @eht_mcs_nss_supp: The supported NSS/MCS combinations.
+ * @eht_ppe_thres: Holds the PPE Thresholds data.
+ */
+struct ieee80211_sta_eht_cap {
+	bool has_eht;
+	struct ieee80211_eht_cap_elem_fixed eht_cap_elem;
+	struct ieee80211_eht_mcs_nss_supp eht_mcs_nss_supp;
+	u8 eht_ppe_thres[IEEE80211_EHT_PPE_THRES_MAX_LEN];
+};
+
+/**
  * struct ieee80211_sband_iftype_data - sband data per interface type
  *
  * This structure encapsulates sband data that is relevant for the
@@ -379,6 +428,7 @@ struct ieee80211_sband_iftype_data {
 	u16 types_mask;
 	struct ieee80211_sta_he_cap he_cap;
 	struct ieee80211_he_6ghz_capa he_6ghz_capa;
+	struct ieee80211_sta_eht_cap eht_cap;
 	struct {
 		const u8 *data;
 		unsigned int len;
@@ -562,6 +612,26 @@ ieee80211_get_he_6ghz_capa(const struct ieee80211_supported_band *sband,
 }
 
 /**
+ * ieee80211_get_eht_iftype_cap - return ETH capabilities for an sband's iftype
+ * @sband: the sband to search for the iftype on
+ * @iftype: enum nl80211_iftype
+ *
+ * Return: pointer to the struct ieee80211_sta_eht_cap, or NULL is none found
+ */
+static inline const struct ieee80211_sta_eht_cap *
+ieee80211_get_eht_iftype_cap(const struct ieee80211_supported_band *sband,
+			     enum nl80211_iftype iftype)
+{
+	const struct ieee80211_sband_iftype_data *data =
+		ieee80211_get_sband_iftype_data(sband, iftype);
+
+	if (data && data->eht_cap.has_eht)
+		return &data->eht_cap;
+
+	return NULL;
+}
+
+/**
  * wiphy_read_of_freq_limits - read frequency limits from device tree
  *
  * @wiphy: the wireless device to get extra limits for
@@ -1417,6 +1487,8 @@ struct sta_txpwr {
  * @airtime_weight: airtime scheduler weight for this station
  * @txpwr: transmit power for an associated station
  * @he_6ghz_capa: HE 6 GHz Band capabilities of station
+ * @eht_capa: EHT capabilities of station
+ * @eht_capa_len: the length of the EHT capabilities
  */
 struct station_parameters {
 	const u8 *supported_rates;
@@ -1450,6 +1522,8 @@ struct station_parameters {
 	u16 airtime_weight;
 	struct sta_txpwr txpwr;
 	const struct ieee80211_he_6ghz_capa *he_6ghz_capa;
+	const struct ieee80211_eht_cap_elem *eht_capa;
+	u8 eht_capa_len;
 };
 
 /**
@@ -1527,6 +1601,7 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
  * @RATE_INFO_FLAGS_HE_MCS: HE MCS information
  * @RATE_INFO_FLAGS_EDMG: 60GHz MCS in EDMG mode
  * @RATE_INFO_FLAGS_EXTENDED_SC_DMG: 60GHz extended SC MCS
+ * @RATE_INFO_FLAGS_EHT_MCS: EHT MCS information
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS			= BIT(0),
@@ -1536,6 +1611,7 @@ enum rate_info_flags {
 	RATE_INFO_FLAGS_HE_MCS			= BIT(4),
 	RATE_INFO_FLAGS_EDMG			= BIT(5),
 	RATE_INFO_FLAGS_EXTENDED_SC_DMG		= BIT(6),
+	RATE_INFO_FLAGS_EHT_MCS			= BIT(7),
 };
 
 /**
@@ -1550,6 +1626,8 @@ enum rate_info_flags {
  * @RATE_INFO_BW_80: 80 MHz bandwidth
  * @RATE_INFO_BW_160: 160 MHz bandwidth
  * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation
+ * @RATE_INFO_BW_320: 320 MHz bandwidth
+ * @RATE_INFO_BW_EHT_RU: bandwidth determined by EHT RU allocation
  */
 enum rate_info_bw {
 	RATE_INFO_BW_20 = 0,
@@ -1559,6 +1637,8 @@ enum rate_info_bw {
 	RATE_INFO_BW_80,
 	RATE_INFO_BW_160,
 	RATE_INFO_BW_HE_RU,
+	RATE_INFO_BW_320,
+	RATE_INFO_BW_EHT_RU,
 };
 
 /**
@@ -1576,6 +1656,9 @@ enum rate_info_bw {
  * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc,
  *	only valid if bw is %RATE_INFO_BW_HE_RU)
  * @n_bonded_ch: In case of EDMG the number of bonded channels (1-4)
+ * @eht_gi: EHT guard interval (from &enum nl80211_eht_gi)
+ * @eht_ru_alloc: EHT RU allocation (from &enum nl80211_eht_ru_alloc,
+ *	only valid if bw is %RATE_INFO_BW_EHT_RU)
  */
 struct rate_info {
 	u8 flags;
@@ -1587,6 +1670,8 @@ struct rate_info {
 	u8 he_dcm;
 	u8 he_ru_alloc;
 	u8 n_bonded_ch;
+	u8 eht_gi;
+	u8 eht_ru_alloc;
 };
 
 /**
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index bd6912d0292b..b8e8c82b53aa 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -636,6 +636,7 @@ struct ieee80211_fils_discovery {
  * @tx_pwr_env: transmit power envelope array of BSS.
  * @tx_pwr_env_num: number of @tx_pwr_env.
  * @pwr_reduction: power constraint of BSS.
+ * @eht_support: does this BSS support EHT
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
@@ -710,6 +711,7 @@ struct ieee80211_bss_conf {
 	struct ieee80211_tx_pwr_env tx_pwr_env[IEEE80211_TPE_MAX_IE_COUNT];
 	u8 tx_pwr_env_num;
 	u8 pwr_reduction;
+	bool eht_support;
 };
 
 /**
@@ -2005,6 +2007,7 @@ enum ieee80211_sta_state {
  * @IEEE80211_STA_RX_BW_80: station can receive up to 80 MHz
  * @IEEE80211_STA_RX_BW_160: station can receive up to 160 MHz
  *	(including 80+80 MHz)
+ * @IEEE80211_STA_RX_BW_320: station can receive up to 320 MHz
  *
  * Implementation note: 20 must be zero to be initialized
  *	correctly, the values must be sorted.
@@ -2014,6 +2017,7 @@ enum ieee80211_sta_rx_bandwidth {
 	IEEE80211_STA_RX_BW_40,
 	IEEE80211_STA_RX_BW_80,
 	IEEE80211_STA_RX_BW_160,
+	IEEE80211_STA_RX_BW_320,
 };
 
 /**
@@ -2069,6 +2073,7 @@ struct ieee80211_sta_txpwr {
  * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
  * @he_cap: HE capabilities of this STA
  * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities
+ * @eht_cap: EHT capabilities of this STA
  * @max_rx_aggregation_subframes: maximal amount of frames in a single AMPDU
  *	that this station is allowed to transmit to us.
  *	Can be modified by driver.
@@ -2109,6 +2114,7 @@ struct ieee80211_sta {
 	struct ieee80211_sta_vht_cap vht_cap;
 	struct ieee80211_sta_he_cap he_cap;
 	struct ieee80211_he_6ghz_capa he_6ghz_capa;
+	struct ieee80211_sta_eht_cap eht_cap;
 	u16 max_rx_aggregation_subframes;
 	bool wme;
 	u8 uapsd_queues;
@@ -6065,6 +6071,16 @@ void ieee80211_disconnect(struct ieee80211_vif *vif, bool reconnect);
 void ieee80211_resume_disconnect(struct ieee80211_vif *vif);
 
 /**
+ * ieee80211_hw_restart_disconnect - disconnect from AP after
+ * hardware restart
+ * @vif: &struct ieee80211_vif pointer from the add_interface callback.
+ *
+ * Instructs mac80211 to disconnect from the AP after
+ * hardware restart.
+ */
+void ieee80211_hw_restart_disconnect(struct ieee80211_vif *vif);
+
+/**
  * ieee80211_cqm_rssi_notify - inform a configured connection quality monitoring
  *	rssi threshold triggered
  *