diff options
| author |   Vijay Rai <vijay.rai@freescale.com> | 2015-01-05 21:14:42 +0530 |
|---|---|---|
| committer |   Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2015-01-09 14:33:04 -0800 |
| commit | fddceb8b5399083bcc042266f188116cc779fc80 (patch) | |
| tree | 018ed4ac4038d64d739aacdf2fbd25e29a81ede9 /include/uapi/linux/serial_reg.h | |
| parent | serial: add device tree binding documentation for Conexant USART (diff) | |
| download | linux-dev-fddceb8b5399083bcc042266f188116cc779fc80.tar.xz linux-dev-fddceb8b5399083bcc042266f188116cc779fc80.zip | |
tty: 8250: Add 64byte UART support for FSL platforms
Some of FSL SoCs like T1040 has new version of UART controller which
can support 64byte FiFo.
To enable 64 byte support, following needs to be done:
-FCR[EN64] needs to be programmed to 1 to enable it.
-Also, when FCR[EN64]==1, RTL bits to be used as below
to define various Receive Trigger Levels:
-FCR[RTL] = 00 1 byte
-FCR[RTL] = 01 16 bytes
-FCR[RTL] = 10 32 bytes
-FCR[RTL] = 11 56 bytes
-tx_loadsz is set to 63-bytes instead of 64-bytes to implement
workaround of errata A-008006 which states that tx_loadsz should
be configured less than Maximum supported fifo bytes
Signed-off-by: Vijay Rai <vijay.rai@freescale.com>
Signed-off-by: Priyanka Jain <Priyanka.Jain@freescale.com>
Signed-off-by: Poonam Aggrwal <poonam.aggrwal@freescale.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'include/uapi/linux/serial_reg.h')
| -rw-r--r-- | include/uapi/linux/serial_reg.h | 3 |
1 files changed, 2 insertions, 1 deletions
diff --git a/include/uapi/linux/serial_reg.h b/include/uapi/linux/serial_reg.h index 53af3b790129..00adb01fa5f3 100644 --- a/include/uapi/linux/serial_reg.h +++ b/include/uapi/linux/serial_reg.h @@ -86,7 +86,8 @@ #define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */ #define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */ #define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */ -#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */ +#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750 and + some Freescale UARTs) */ #define UART_FCR_R_TRIG_SHIFT 6 #define UART_FCR_R_TRIG_BITS(x) \ |