Merge tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic

Pull initial Loongarch architecture code from Arnd Bergmann:
 "This is the majority of the loongarch architecture code, including the
  final system call interface and all core functionality.

  It still misses three sets of peripheral but vital patches to add
  support for other subsystems, which have yet to pass review:

   - The drivers/firmware/efi stub for booting from a standard UEFI
     firmware implementation. Both the original custom boot interface
     and a draft implementation of the EFI stub did not make it, so it
     is currently impossible to boot the kernel, until the loongarch
     specific portions get accepted into the UEFI subsystem

   - The drivers/irqchip/irq-loongson-*.c drivers are shared with the
     the MIPS port, but currently lack support for ACPI based booting,
     which will get merged through the irqchip subsystem.

   - Similarly, the drivers/pci/controller/pci-loongson.c needs to be
     modified for ACPI support, which will be merged through the PCI
     subsystem.

  While the port cannot actually be used before all the above are
  merged, having it in 5.19 helps to establish the user space ABI for
  the libc ports to build on, and to help any treewide changes in the
  mainline kernel get applied here as well.

  A gcc-12 based tool chains for build testing is now included in

    https://mirrors.edge.kernel.org/pub/tools/crosstool/"

Original description from Huacai Chen:
 "LoongArch is a new RISC ISA, which is a bit like MIPS or RISC-V.
  LoongArch includes a reduced 32-bit version (LA32R), a standard 32-bit
  version (LA32S) and a 64-bit version (LA64). LoongArch use ACPI as its
  boot protocol LoongArch-specific interrupt controllers (similar to APIC)
  are already added in the next revision of ACPI Specification (current
  revision is 6.4).

  This patchset is adding basic LoongArch support in mainline kernel, we
  can see a complete snapshot here:

    https://github.com/loongson/linux/tree/loongarch-next
    https://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson.git/log/?h=loongarch-next

  Cross-compile tool chain to build kernel:

    https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-2022-03-03-cross-tools-gcc-glibc.tar.xz

  A CLFS-based Linux distro:

    https://github.com/loongson/build-tools/releases/download/2021.12.21/loongarch64-clfs-system-2022-03-03.tar.bz2

  Open-source tool chain which is under review (Binutils and Gcc are already upstream):

    https://github.com/loongson/binutils-gdb/tree/upstream_v3.1
    https://github.com/loongson/gcc/tree/loongarch_upstream_v6.3
    https://github.com/loongson/glibc/tree/loongarch_2_35_dev_v2.2

  Loongson and LoongArch documentations:

    https://github.com/loongson/LoongArch-Documentation

  LoongArch-specific interrupt controllers:

    https://mantis.uefi.org/mantis/view.php?id=2203
    https://mantis.uefi.org/mantis/view.php?id=2313"

Link: https://lore.kernel.org/lkml/20220603072053.35005-1-chenhuacai@loongson.cn/

* tag 'loongarch-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic: (24 commits)
  MAINTAINERS: Add maintainer information for LoongArch
  LoongArch: Add Loongson-3 default config file
  LoongArch: Add Non-Uniform Memory Access (NUMA) support
  LoongArch: Add multi-processor (SMP) support
  LoongArch: Add VDSO and VSYSCALL support
  LoongArch: Add some library functions
  LoongArch: Add misc common routines
  LoongArch: Add ELF and module support
  LoongArch: Add signal handling support
  LoongArch: Add system call support
  LoongArch: Add memory management
  LoongArch: Add process management
  LoongArch: Add exception/interrupt handling
  LoongArch: Add boot and setup routines
  LoongArch: Add other common headers
  LoongArch: Add atomic/locking headers
  LoongArch: Add CPU definition headers
  LoongArch: Add build infrastructure
  LoongArch: Add writecombine support for drm
  LoongArch: Add ELF-related definitions
  ...

4 files changed, 9 insertions, 0 deletions

diff --git a/include/uapi/linux/audit.h b/include/uapi/linux/audit.h
index 8eda133ca4c1..7c1dc818b1d5 100644
--- a/include/uapi/linux/audit.h
+++ b/include/uapi/linux/audit.h
@@ -439,6 +439,8 @@ enum {
 #define AUDIT_ARCH_UNICORE	(EM_UNICORE|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_X86_64	(EM_X86_64|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 #define AUDIT_ARCH_XTENSA	(EM_XTENSA)
+#define AUDIT_ARCH_LOONGARCH32	(EM_LOONGARCH|__AUDIT_ARCH_LE)
+#define AUDIT_ARCH_LOONGARCH64	(EM_LOONGARCH|__AUDIT_ARCH_64BIT|__AUDIT_ARCH_LE)
 
 #define AUDIT_PERM_EXEC		1
 #define AUDIT_PERM_WRITE	2
diff --git a/include/uapi/linux/elf-em.h b/include/uapi/linux/elf-em.h
index f47e853546fa..ef38c2bc5ab7 100644
--- a/include/uapi/linux/elf-em.h
+++ b/include/uapi/linux/elf-em.h
@@ -51,6 +51,7 @@
 #define EM_RISCV	243	/* RISC-V */
 #define EM_BPF		247	/* Linux BPF - in-kernel virtual machine */
 #define EM_CSKY		252	/* C-SKY */
+#define EM_LOONGARCH	258	/* LoongArch */
 #define EM_FRV		0x5441	/* Fujitsu FR-V */
 
 /*
diff --git a/include/uapi/linux/elf.h b/include/uapi/linux/elf.h
index c4abd09c3da9..2b9f5e9985e5 100644
--- a/include/uapi/linux/elf.h
+++ b/include/uapi/linux/elf.h
@@ -438,6 +438,11 @@ typedef struct elf64_shdr {
 #define NT_MIPS_DSP	0x800		/* MIPS DSP ASE registers */
 #define NT_MIPS_FP_MODE	0x801		/* MIPS floating-point mode */
 #define NT_MIPS_MSA	0x802		/* MIPS SIMD registers */
+#define NT_LOONGARCH_CPUCFG	0xa00	/* LoongArch CPU config registers */
+#define NT_LOONGARCH_CSR	0xa01	/* LoongArch control and status registers */
+#define NT_LOONGARCH_LSX	0xa02	/* LoongArch Loongson SIMD Extension registers */
+#define NT_LOONGARCH_LASX	0xa03	/* LoongArch Loongson Advanced SIMD Extension registers */
+#define NT_LOONGARCH_LBT	0xa04	/* LoongArch Loongson Binary Translation registers */
 
 /* Note types with note name "GNU" */
 #define NT_GNU_PROPERTY_TYPE_0	5
diff --git a/include/uapi/linux/kexec.h b/include/uapi/linux/kexec.h
index fb7e2ef60825..981016e05cfa 100644
--- a/include/uapi/linux/kexec.h
+++ b/include/uapi/linux/kexec.h
@@ -43,6 +43,7 @@
 #define KEXEC_ARCH_MIPS    ( 8 << 16)
 #define KEXEC_ARCH_AARCH64 (183 << 16)
 #define KEXEC_ARCH_RISCV   (243 << 16)
+#define KEXEC_ARCH_LOONGARCH	(258 << 16)
 
 /* The artificial cap on the number of segments passed to kexec_load. */
 #define KEXEC_SEGMENT_MAX 16