Merge tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux

Pull fbdev changes from Tomi Valkeinen:
 "OMAPDSS changes, including:
   - use dynanic debug prints
   - OMAP platform dependency removals
   - Creation of compat-layer, helping us to improve omapdrm
   - Misc cleanups, aiming to make omadss more in line with the upcoming
     common display framework

  Exynos DP changes for the 3.8 merge window:
   - Device Tree support for Samsung Exynos DP
   - SW Link training is cleaned up.
   - HPD interrupt is supported.

  Samsung Framebuffer changes for the 3.8 merge window:
   - The bit definitions of header file are updated.
   - Some minor typos are fixed.
   - Some minor bugs of s3c_fb_check_var() are fixed.

  FB related changes for SH Mobile, Freescale DIU

  Add support for the Solomon SSD1307 OLED Controller"

* tag 'fbdev-for-3.8' of git://gitorious.org/linux-omap-dss2/linux: (191 commits)
  OMAPDSS: fix TV-out issue with DSI PLL
  Revert "OMAPFB: simplify locking"
  OMAPFB: remove silly loop in fb2display()
  OMAPFB: fix error handling in omapfb_find_best_mode()
  OMAPFB: use devm_kzalloc to allocate omapfb2_device
  OMAPDSS: DISPC: remove dispc fck uses
  OMAPDSS: DISPC: get dss clock rate from dss driver
  drivers/video/console/softcursor.c: remove redundant NULL check before kfree()
  drivers/video: add support for the Solomon SSD1307 OLED Controller
  OMAPDSS: use omapdss_compat_init() in other drivers
  OMAPDSS: export dispc functions
  OMAPDSS: export dss_feat functions
  OMAPDSS: export dss_mgr_ops functions
  OMAPDSS: separate compat files in the Makefile
  OMAPDSS: move display sysfs init to compat layer
  OMAPDSS: DPI: use dispc's check_timings
  OMAPDSS: DISPC: add dispc_ovl_check()
  OMAPDSS: move irq handling to dispc-compat
  OMAPDSS: move omap_dispc_wait_for_irq_interruptible_timeout to dispc-compat.c
  OMAPDSS: move blocking mgr enable/disable to compat layer
  ...

Conflicts:
	arch/arm/mach-davinci/devices-da8xx.c
	arch/arm/plat-omap/common.c
	drivers/media/platform/omap/omap_vout.c

6 files changed, 147 insertions, 151 deletions

diff --git a/include/linux/fsl-diu-fb.h b/include/linux/fsl-diu-fb.h
index 11c16a1fb9e3..a1e8277120c7 100644
--- a/include/linux/fsl-diu-fb.h
+++ b/include/linux/fsl-diu-fb.h
@@ -47,6 +47,15 @@ struct aoi_display_offset {
 #define MFB_GET_PIXFMT		_IOR('M', 8, __u32)
 
 /*
+ * The MPC5121 BSP comes with a gamma_set utility that initializes the
+ * gamma table.  Unfortunately, it uses bad values for the IOCTL commands,
+ * but there's nothing we can do about it now.  These ioctls are only
+ * supported on the MPC5121.
+ */
+#define MFB_SET_GAMMA		_IOW('M', 1, __u8)
+#define MFB_GET_GAMMA		_IOR('M', 1, __u8)
+
+/*
  * The original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the
  * wrong value for 'size' field of the ioctl.  The current macros above use the
  * right size, but we still need to provide backwards compatibility, at least
diff --git a/include/video/da8xx-fb.h b/include/video/da8xx-fb.h
index 5a0e4f9efb53..f88825928dd1 100644
--- a/include/video/da8xx-fb.h
+++ b/include/video/da8xx-fb.h
@@ -12,10 +12,6 @@
 #ifndef DA8XX_FB_H
 #define DA8XX_FB_H
 
-enum panel_type {
-	QVGA = 0
-};
-
 enum panel_shade {
 	MONOCHROME = 0,
 	COLOR_ACTIVE,
@@ -27,13 +23,6 @@ enum raster_load_mode {
 	LOAD_PALETTE,
 };
 
-struct display_panel {
-	enum panel_type panel_type; /* QVGA */
-	int max_bpp;
-	int min_bpp;
-	enum panel_shade panel_shade;
-};
-
 struct da8xx_lcdc_platform_data {
 	const char manu_name[10];
 	void *controller_data;
@@ -42,7 +31,7 @@ struct da8xx_lcdc_platform_data {
 };
 
 struct lcd_ctrl_config {
-	const struct display_panel *p_disp_panel;
+	enum panel_shade panel_shade;
 
 	/* AC Bias Pin Frequency */
 	int ac_bias;
@@ -68,18 +57,9 @@ struct lcd_ctrl_config {
 	/* Mono 8-bit Mode: 1=D0-D7 or 0=D0-D3 */
 	unsigned char mono_8bit_mode;
 
-	/* Invert line clock */
-	unsigned char invert_line_clock;
-
-	/* Invert frame clock  */
-	unsigned char invert_frm_clock;
-
 	/* Horizontal and Vertical Sync Edge: 0=rising 1=falling */
 	unsigned char sync_edge;
 
-	/* Horizontal and Vertical Sync: Control: 0=ignore */
-	unsigned char sync_ctrl;
-
 	/* Raster Data Order Select: 1=Most-to-least 0=Least-to-most */
 	unsigned char raster_order;
 
@@ -103,5 +83,8 @@ struct lcd_sync_arg {
 #define FBIPUT_HSYNC		_IOW('F', 9, int)
 #define FBIPUT_VSYNC		_IOW('F', 10, int)
 
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_CLK_INVERT 0x40000000
+
 #endif  /* ifndef DA8XX_FB_H */
 
diff --git a/include/video/omapdss.h b/include/video/omapdss.h
index 88c829466fc1..caefa093337d 100644
--- a/include/video/omapdss.h
+++ b/include/video/omapdss.h
@@ -21,6 +21,7 @@
 #include <linux/list.h>
 #include <linux/kobject.h>
 #include <linux/device.h>
+#include <linux/interrupt.h>
 
 #define DISPC_IRQ_FRAMEDONE		(1 << 0)
 #define DISPC_IRQ_VSYNC			(1 << 1)
@@ -55,6 +56,7 @@
 
 struct omap_dss_device;
 struct omap_overlay_manager;
+struct dss_lcd_mgr_config;
 struct snd_aes_iec958;
 struct snd_cea_861_aud_if;
 
@@ -158,7 +160,6 @@ enum omap_display_caps {
 enum omap_dss_display_state {
 	OMAP_DSS_DISPLAY_DISABLED = 0,
 	OMAP_DSS_DISPLAY_ACTIVE,
-	OMAP_DSS_DISPLAY_SUSPENDED,
 };
 
 enum omap_dss_audio_state {
@@ -621,10 +622,6 @@ struct omap_dss_device {
 	struct {
 		struct omap_video_timings timings;
 
-		int acbi;	/* ac-bias pin transitions per interrupt */
-		/* Unit: line clocks */
-		int acb;	/* ac-bias pin frequency */
-
 		enum omap_dss_dsi_pixel_format dsi_pix_fmt;
 		enum omap_dss_dsi_mode dsi_mode;
 		struct omap_dss_dsi_videomode_timings dsi_vm_timings;
@@ -686,8 +683,6 @@ struct omap_dss_driver {
 
 	int (*enable)(struct omap_dss_device *display);
 	void (*disable)(struct omap_dss_device *display);
-	int (*suspend)(struct omap_dss_device *display);
-	int (*resume)(struct omap_dss_device *display);
 	int (*run_test)(struct omap_dss_device *display, int test);
 
 	int (*update)(struct omap_dss_device *dssdev,
@@ -745,6 +740,8 @@ struct omap_dss_driver {
 
 };
 
+enum omapdss_version omapdss_get_version(void);
+
 int omap_dss_register_driver(struct omap_dss_driver *);
 void omap_dss_unregister_driver(struct omap_dss_driver *);
 
@@ -754,10 +751,19 @@ void omap_dss_put_device(struct omap_dss_device *dssdev);
 struct omap_dss_device *omap_dss_get_next_device(struct omap_dss_device *from);
 struct omap_dss_device *omap_dss_find_device(void *data,
 		int (*match)(struct omap_dss_device *dssdev, void *data));
+const char *omapdss_get_default_display_name(void);
 
 int omap_dss_start_device(struct omap_dss_device *dssdev);
 void omap_dss_stop_device(struct omap_dss_device *dssdev);
 
+int dss_feat_get_num_mgrs(void);
+int dss_feat_get_num_ovls(void);
+enum omap_display_type dss_feat_get_supported_displays(enum omap_channel channel);
+enum omap_dss_output_id dss_feat_get_supported_outputs(enum omap_channel channel);
+enum omap_color_mode dss_feat_get_supported_color_modes(enum omap_plane plane);
+
+
+
 int omap_dss_get_num_overlay_managers(void);
 struct omap_overlay_manager *omap_dss_get_overlay_manager(int num);
 
@@ -779,9 +785,43 @@ typedef void (*omap_dispc_isr_t) (void *arg, u32 mask);
 int omap_dispc_register_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
 int omap_dispc_unregister_isr(omap_dispc_isr_t isr, void *arg, u32 mask);
 
-int omap_dispc_wait_for_irq_timeout(u32 irqmask, unsigned long timeout);
-int omap_dispc_wait_for_irq_interruptible_timeout(u32 irqmask,
-		unsigned long timeout);
+u32 dispc_read_irqstatus(void);
+void dispc_clear_irqstatus(u32 mask);
+u32 dispc_read_irqenable(void);
+void dispc_write_irqenable(u32 mask);
+
+int dispc_request_irq(irq_handler_t handler, void *dev_id);
+void dispc_free_irq(void *dev_id);
+
+int dispc_runtime_get(void);
+void dispc_runtime_put(void);
+
+void dispc_mgr_enable(enum omap_channel channel, bool enable);
+bool dispc_mgr_is_enabled(enum omap_channel channel);
+u32 dispc_mgr_get_vsync_irq(enum omap_channel channel);
+u32 dispc_mgr_get_framedone_irq(enum omap_channel channel);
+u32 dispc_mgr_get_sync_lost_irq(enum omap_channel channel);
+bool dispc_mgr_go_busy(enum omap_channel channel);
+void dispc_mgr_go(enum omap_channel channel);
+void dispc_mgr_set_lcd_config(enum omap_channel channel,
+		const struct dss_lcd_mgr_config *config);
+void dispc_mgr_set_timings(enum omap_channel channel,
+		const struct omap_video_timings *timings);
+void dispc_mgr_setup(enum omap_channel channel,
+		const struct omap_overlay_manager_info *info);
+
+int dispc_ovl_check(enum omap_plane plane, enum omap_channel channel,
+		const struct omap_overlay_info *oi,
+		const struct omap_video_timings *timings,
+		int *x_predecim, int *y_predecim);
+
+int dispc_ovl_enable(enum omap_plane plane, bool enable);
+bool dispc_ovl_enabled(enum omap_plane plane);
+void dispc_ovl_set_channel_out(enum omap_plane plane,
+		enum omap_channel channel);
+int dispc_ovl_setup(enum omap_plane plane, const struct omap_overlay_info *oi,
+		bool replication, const struct omap_video_timings *mgr_timings,
+		bool mem_to_mem);
 
 #define to_dss_driver(x) container_of((x), struct omap_dss_driver, driver)
 #define to_dss_device(x) container_of((x), struct omap_dss_device, dev)
@@ -840,4 +880,35 @@ void omapdss_rfbi_set_data_lines(struct omap_dss_device *dssdev,
 void omapdss_rfbi_set_interface_timings(struct omap_dss_device *dssdev,
 		struct rfbi_timings *timings);
 
+int omapdss_compat_init(void);
+void omapdss_compat_uninit(void);
+
+struct dss_mgr_ops {
+	void (*start_update)(struct omap_overlay_manager *mgr);
+	int (*enable)(struct omap_overlay_manager *mgr);
+	void (*disable)(struct omap_overlay_manager *mgr);
+	void (*set_timings)(struct omap_overlay_manager *mgr,
+			const struct omap_video_timings *timings);
+	void (*set_lcd_config)(struct omap_overlay_manager *mgr,
+			const struct dss_lcd_mgr_config *config);
+	int (*register_framedone_handler)(struct omap_overlay_manager *mgr,
+			void (*handler)(void *), void *data);
+	void (*unregister_framedone_handler)(struct omap_overlay_manager *mgr,
+			void (*handler)(void *), void *data);
+};
+
+int dss_install_mgr_ops(const struct dss_mgr_ops *mgr_ops);
+void dss_uninstall_mgr_ops(void);
+
+void dss_mgr_set_timings(struct omap_overlay_manager *mgr,
+		const struct omap_video_timings *timings);
+void dss_mgr_set_lcd_config(struct omap_overlay_manager *mgr,
+		const struct dss_lcd_mgr_config *config);
+int dss_mgr_enable(struct omap_overlay_manager *mgr);
+void dss_mgr_disable(struct omap_overlay_manager *mgr);
+void dss_mgr_start_update(struct omap_overlay_manager *mgr);
+int dss_mgr_register_framedone_handler(struct omap_overlay_manager *mgr,
+		void (*handler)(void *), void *data);
+void dss_mgr_unregister_framedone_handler(struct omap_overlay_manager *mgr,
+		void (*handler)(void *), void *data);
 #endif
diff --git a/include/video/samsung_fimd.h b/include/video/samsung_fimd.h
index 7ae6c07f2ef8..e7554486a2b7 100644
--- a/include/video/samsung_fimd.h
+++ b/include/video/samsung_fimd.h
@@ -24,12 +24,15 @@
 
 #define VIDCON0					(0x00)
 #define VIDCON0_INTERLACE			(1 << 29)
-#define VIDCON0_VIDOUT_MASK			(0x3 << 26)
+#define VIDCON0_VIDOUT_MASK			(0x7 << 26)
 #define VIDCON0_VIDOUT_SHIFT			(26)
 #define VIDCON0_VIDOUT_RGB			(0x0 << 26)
 #define VIDCON0_VIDOUT_TV			(0x1 << 26)
 #define VIDCON0_VIDOUT_I80_LDI0			(0x2 << 26)
 #define VIDCON0_VIDOUT_I80_LDI1			(0x3 << 26)
+#define VIDCON0_VIDOUT_WB_RGB			(0x4 << 26)
+#define VIDCON0_VIDOUT_WB_I80_LDI0		(0x6 << 26)
+#define VIDCON0_VIDOUT_WB_I80_LDI1		(0x7 << 26)
 
 #define VIDCON0_L1_DATA_MASK			(0x7 << 23)
 #define VIDCON0_L1_DATA_SHIFT			(23)
@@ -77,6 +80,7 @@
 #define VIDCON1_LINECNT_MASK			(0x7ff << 16)
 #define VIDCON1_LINECNT_SHIFT			(16)
 #define VIDCON1_LINECNT_GET(_v)			(((_v) >> 16) & 0x7ff)
+#define VIDCON1_FSTATUS_EVEN			(1 << 15)
 #define VIDCON1_VSTATUS_MASK			(0x3 << 13)
 #define VIDCON1_VSTATUS_SHIFT			(13)
 #define VIDCON1_VSTATUS_VSYNC			(0x0 << 13)
@@ -116,6 +120,7 @@
 
 /* VIDTCON0 */
 
+#define VIDTCON0				(0x10)
 #define VIDTCON0_VBPDE_MASK			(0xff << 24)
 #define VIDTCON0_VBPDE_SHIFT			(24)
 #define VIDTCON0_VBPDE_LIMIT			(0xff)
@@ -138,6 +143,7 @@
 
 /* VIDTCON1 */
 
+#define VIDTCON1				(0x14)
 #define VIDTCON1_VFPDE_MASK			(0xff << 24)
 #define VIDTCON1_VFPDE_SHIFT			(24)
 #define VIDTCON1_VFPDE_LIMIT			(0xff)
@@ -159,6 +165,7 @@
 #define VIDTCON1_HSPW(_x)			((_x) << 0)
 
 #define VIDTCON2				(0x18)
+#define VIDTCON2				(0x18)
 #define VIDTCON2_LINEVAL_E(_x)			((((_x) & 0x800) >> 11) << 23)
 #define VIDTCON2_LINEVAL_MASK			(0x7ff << 11)
 #define VIDTCON2_LINEVAL_SHIFT			(11)
@@ -173,18 +180,27 @@
 
 /* WINCONx */
 
-
+#define WINCON(_win)				(0x20 + ((_win) * 4))
+#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
+#define WINCONx_CSCWIDTH_SHIFT			(26)
+#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
+#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
+#define WINCONx_ENLOCAL				(1 << 22)
+#define WINCONx_BUFSTATUS			(1 << 21)
+#define WINCONx_BUFSEL				(1 << 20)
+#define WINCONx_BUFAUTOEN			(1 << 19)
 #define WINCONx_BITSWP				(1 << 18)
 #define WINCONx_BYTSWP				(1 << 17)
 #define WINCONx_HAWSWP				(1 << 16)
 #define WINCONx_WSWP				(1 << 15)
+#define WINCONx_YCbCr				(1 << 13)
 #define WINCONx_BURSTLEN_MASK			(0x3 << 9)
 #define WINCONx_BURSTLEN_SHIFT			(9)
 #define WINCONx_BURSTLEN_16WORD			(0x0 << 9)
 #define WINCONx_BURSTLEN_8WORD			(0x1 << 9)
 #define WINCONx_BURSTLEN_4WORD			(0x2 << 9)
-
 #define WINCONx_ENWIN				(1 << 0)
+
 #define WINCON0_BPPMODE_MASK			(0xf << 2)
 #define WINCON0_BPPMODE_SHIFT			(2)
 #define WINCON0_BPPMODE_1BPP			(0x0 << 2)
@@ -196,9 +212,8 @@
 #define WINCON0_BPPMODE_18BPP_666		(0x8 << 2)
 #define WINCON0_BPPMODE_24BPP_888		(0xb << 2)
 
+#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
 #define WINCON1_BLD_PIX				(1 << 6)
-
-#define WINCON1_ALPHA_SEL			(1 << 1)
 #define WINCON1_BPPMODE_MASK			(0xf << 2)
 #define WINCON1_BPPMODE_SHIFT			(2)
 #define WINCON1_BPPMODE_1BPP			(0x0 << 2)
@@ -216,6 +231,7 @@
 #define WINCON1_BPPMODE_24BPP_A1887		(0xc << 2)
 #define WINCON1_BPPMODE_25BPP_A1888		(0xd << 2)
 #define WINCON1_BPPMODE_28BPP_A4888		(0xd << 2)
+#define WINCON1_ALPHA_SEL			(1 << 1)
 
 /* S5PV210 */
 #define SHADOWCON				(0x34)
@@ -225,6 +241,9 @@
 /* Local input channels (windows 0-2) */
 #define SHADOWCON_CHx_LOCAL_ENABLE(_win)	(1 << (5 + (_win)))
 
+/* VIDOSDx */
+
+#define VIDOSD_BASE				(0x40)
 #define VIDOSDxA_TOPLEFT_X_E(_x)		((((_x) & 0x800) >> 11) << 23)
 #define VIDOSDxA_TOPLEFT_X_MASK			(0x7ff << 11)
 #define VIDOSDxA_TOPLEFT_X_SHIFT		(11)
@@ -293,6 +312,7 @@
 
 /* Interrupt controls and status */
 
+#define VIDINTCON0				(0x130)
 #define VIDINTCON0_FIFOINTERVAL_MASK		(0x3f << 20)
 #define VIDINTCON0_FIFOINTERVAL_SHIFT		(20)
 #define VIDINTCON0_FIFOINTERVAL_LIMIT		(0x3f)
@@ -321,6 +341,9 @@
 #define VIDINTCON0_FIFIOSEL_SHIFT		(5)
 #define VIDINTCON0_FIFIOSEL_WINDOW0		(0x1 << 5)
 #define VIDINTCON0_FIFIOSEL_WINDOW1		(0x2 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
+#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
 
 #define VIDINTCON0_FIFOLEVEL_MASK		(0x7 << 2)
 #define VIDINTCON0_FIFOLEVEL_SHIFT		(2)
@@ -357,16 +380,39 @@
 #define WxKEYCON1_COLVAL_LIMIT			(0xffffff)
 #define WxKEYCON1_COLVAL(_x)			((_x) << 0)
 
+/* Dithering control */
+#define DITHMODE				(0x170)
+#define DITHMODE_R_POS_MASK			(0x3 << 5)
+#define DITHMODE_R_POS_SHIFT			(5)
+#define DITHMODE_R_POS_8BIT			(0x0 << 5)
+#define DITHMODE_R_POS_6BIT			(0x1 << 5)
+#define DITHMODE_R_POS_5BIT			(0x2 << 5)
+#define DITHMODE_G_POS_MASK			(0x3 << 3)
+#define DITHMODE_G_POS_SHIFT			(3)
+#define DITHMODE_G_POS_8BIT			(0x0 << 3)
+#define DITHMODE_G_POS_6BIT			(0x1 << 3)
+#define DITHMODE_G_POS_5BIT			(0x2 << 3)
+#define DITHMODE_B_POS_MASK			(0x3 << 1)
+#define DITHMODE_B_POS_SHIFT			(1)
+#define DITHMODE_B_POS_8BIT			(0x0 << 1)
+#define DITHMODE_B_POS_6BIT			(0x1 << 1)
+#define DITHMODE_B_POS_5BIT			(0x2 << 1)
+#define DITHMODE_DITH_EN			(1 << 0)
 
 /* Window blanking (MAP) */
-
+#define WINxMAP(_win)				(0x180 + ((_win) * 4))
 #define WINxMAP_MAP				(1 << 24)
 #define WINxMAP_MAP_COLOUR_MASK			(0xffffff << 0)
 #define WINxMAP_MAP_COLOUR_SHIFT		(0)
 #define WINxMAP_MAP_COLOUR_LIMIT		(0xffffff)
 #define WINxMAP_MAP_COLOUR(_x)			((_x) << 0)
 
+/* Winodw palette control */
+#define WPALCON					(0x1A0)
 #define WPALCON_PAL_UPDATE			(1 << 9)
+#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
+#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
+#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
 #define WPALCON_W1PAL_MASK			(0x7 << 3)
 #define WPALCON_W1PAL_SHIFT			(3)
 #define WPALCON_W1PAL_25BPP_A888		(0x0 << 3)
@@ -376,7 +422,6 @@
 #define WPALCON_W1PAL_18BPP			(0x4 << 3)
 #define WPALCON_W1PAL_16BPP_A555		(0x5 << 3)
 #define WPALCON_W1PAL_16BPP_565			(0x6 << 3)
-
 #define WPALCON_W0PAL_MASK			(0x7 << 0)
 #define WPALCON_W0PAL_SHIFT			(0)
 #define WPALCON_W0PAL_25BPP_A888		(0x0 << 0)
@@ -394,115 +439,6 @@
 #define BLENDCON_NEW_4BIT_ALPHA_VALUE		(0 << 0)
 
 #define S3C_FB_MAX_WIN (5)  /* number of hardware windows available. */
-#define VIDCON1_FSTATUS_EVEN	(1 << 15)
-
-/* Video timing controls */
-#define VIDTCON0				(0x10)
-#define VIDTCON1				(0x14)
-#define VIDTCON2				(0x18)
-
-/* Window position controls */
-
-#define WINCON(_win)				(0x20 + ((_win) * 4))
-
-/* OSD1 and OSD4 do not have register D */
-
-#define VIDOSD_BASE				(0x40)
-
-#define VIDINTCON0				(0x130)
-
-/* WINCONx */
-
-#define WINCONx_CSCWIDTH_MASK			(0x3 << 26)
-#define WINCONx_CSCWIDTH_SHIFT			(26)
-#define WINCONx_CSCWIDTH_WIDE			(0x0 << 26)
-#define WINCONx_CSCWIDTH_NARROW			(0x3 << 26)
-
-#define WINCONx_ENLOCAL				(1 << 22)
-#define WINCONx_BUFSTATUS			(1 << 21)
-#define WINCONx_BUFSEL				(1 << 20)
-#define WINCONx_BUFAUTOEN			(1 << 19)
-#define WINCONx_YCbCr				(1 << 13)
-
-#define WINCON1_LOCALSEL_CAMIF			(1 << 23)
-
-#define WINCON2_LOCALSEL_CAMIF			(1 << 23)
-#define WINCON2_BLD_PIX				(1 << 6)
-
-#define WINCON2_ALPHA_SEL			(1 << 1)
-#define WINCON2_BPPMODE_MASK			(0xf << 2)
-#define WINCON2_BPPMODE_SHIFT			(2)
-#define WINCON2_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON2_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON2_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON2_BPPMODE_8BPP_1232		(0x4 << 2)
-#define WINCON2_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON2_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON2_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON2_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON2_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON2_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON2_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON2_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON2_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON2_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define WINCON3_BLD_PIX				(1 << 6)
-
-#define WINCON3_ALPHA_SEL			(1 << 1)
-#define WINCON3_BPPMODE_MASK			(0xf << 2)
-#define WINCON3_BPPMODE_SHIFT			(2)
-#define WINCON3_BPPMODE_1BPP			(0x0 << 2)
-#define WINCON3_BPPMODE_2BPP			(0x1 << 2)
-#define WINCON3_BPPMODE_4BPP			(0x2 << 2)
-#define WINCON3_BPPMODE_16BPP_565		(0x5 << 2)
-#define WINCON3_BPPMODE_16BPP_A1555		(0x6 << 2)
-#define WINCON3_BPPMODE_16BPP_I1555		(0x7 << 2)
-#define WINCON3_BPPMODE_18BPP_666		(0x8 << 2)
-#define WINCON3_BPPMODE_18BPP_A1665		(0x9 << 2)
-#define WINCON3_BPPMODE_19BPP_A1666		(0xa << 2)
-#define WINCON3_BPPMODE_24BPP_888		(0xb << 2)
-#define WINCON3_BPPMODE_24BPP_A1887		(0xc << 2)
-#define WINCON3_BPPMODE_25BPP_A1888		(0xd << 2)
-#define WINCON3_BPPMODE_28BPP_A4888		(0xd << 2)
-
-#define VIDINTCON0_FIFIOSEL_WINDOW2		(0x10 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW3		(0x20 << 5)
-#define VIDINTCON0_FIFIOSEL_WINDOW4		(0x40 << 5)
-
-#define DITHMODE				(0x170)
-#define WINxMAP(_win)				(0x180 + ((_win) * 4))
-
-
-#define DITHMODE_R_POS_MASK			(0x3 << 5)
-#define DITHMODE_R_POS_SHIFT			(5)
-#define DITHMODE_R_POS_8BIT			(0x0 << 5)
-#define DITHMODE_R_POS_6BIT			(0x1 << 5)
-#define DITHMODE_R_POS_5BIT			(0x2 << 5)
-
-#define DITHMODE_G_POS_MASK			(0x3 << 3)
-#define DITHMODE_G_POS_SHIFT			(3)
-#define DITHMODE_G_POS_8BIT			(0x0 << 3)
-#define DITHMODE_G_POS_6BIT			(0x1 << 3)
-#define DITHMODE_G_POS_5BIT			(0x2 << 3)
-
-#define DITHMODE_B_POS_MASK			(0x3 << 1)
-#define DITHMODE_B_POS_SHIFT			(1)
-#define DITHMODE_B_POS_8BIT			(0x0 << 1)
-#define DITHMODE_B_POS_6BIT			(0x1 << 1)
-#define DITHMODE_B_POS_5BIT			(0x2 << 1)
-
-#define DITHMODE_DITH_EN			(1 << 0)
-
-#define WPALCON					(0x1A0)
-
-/* Palette control */
-/* Note for S5PC100: you can still use those macros on WPALCON (aka WPALCON_L),
- * but make sure that WPALCON_H W2PAL-W4PAL entries are zeroed out */
-#define WPALCON_W4PAL_16BPP_A555		(1 << 8)
-#define WPALCON_W3PAL_16BPP_A555		(1 << 7)
-#define WPALCON_W2PAL_16BPP_A555		(1 << 6)
-
 
 /* Notes on per-window bpp settings
  *
diff --git a/include/video/sh_mipi_dsi.h b/include/video/sh_mipi_dsi.h
index 06c67fbc4eee..a01f197e6ac1 100644
--- a/include/video/sh_mipi_dsi.h
+++ b/include/video/sh_mipi_dsi.h
@@ -25,8 +25,6 @@ enum sh_mipi_dsi_data_fmt {
 	MIPI_YUV420,
 };
 
-struct sh_mobile_lcdc_chan_cfg;
-
 #define SH_MIPI_DSI_HSABM	(1 << 0)
 #define SH_MIPI_DSI_HBPBM	(1 << 1)
 #define SH_MIPI_DSI_HFPBM	(1 << 2)
@@ -47,7 +45,7 @@ struct sh_mobile_lcdc_chan_cfg;
 
 struct sh_mipi_dsi_info {
 	enum sh_mipi_dsi_data_fmt	data_format;
-	struct sh_mobile_lcdc_chan_cfg	*lcd_chan;
+	int				channel;
 	int				lane;
 	unsigned long			flags;
 	u32				clksrc;
diff --git a/include/video/sh_mobile_lcdc.h b/include/video/sh_mobile_lcdc.h
index ff43ffc1aab2..2605fa8adb9c 100644
--- a/include/video/sh_mobile_lcdc.h
+++ b/include/video/sh_mobile_lcdc.h
@@ -163,7 +163,6 @@ struct sh_mobile_lcdc_bl_info {
 	const char *name;
 	int max_brightness;
 	int (*set_brightness)(int brightness);
-	int (*get_brightness)(void);
 };
 
 struct sh_mobile_lcdc_overlay_cfg {