Merge tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging

Pull staging drivers patches from Greg KH:
 "Here's the big staging driver tree update for 3.20-rc1.

  Lots of little things in here, adding up to lots of overall cleanups.
  The IIO driver updates are also in here as they cross the staging tree
  boundry a lot.  I2O has moved into staging as well, as a plan to drop
  it from the tree eventually as that's a dead subsystem.

  All of this has been in linux-next with no reported issues for a
  while"

* tag 'staging-3.20-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (740 commits)
  staging: lustre: lustre: libcfs: define symbols as static
  staging: rtl8712: Do coding style cleanup
  staging: lustre: make obd_updatemax_lock static
  staging: rtl8188eu: core: switch with redundant cases
  staging: rtl8188eu: odm: conditional setting with no effect
  staging: rtl8188eu: odm: condition with no effect
  staging: ft1000: fix braces warning
  staging: sm7xxfb: fix remaining CamelCase
  staging: sm7xxfb: fix CamelCase
  staging: rtl8723au: multiple condition with no effect - if identical to else
  staging: sm7xxfb: make smtc_scr_info static
  staging/lustre/mdc: Initialize req in mdc_enqueue for !it case
  staging/lustre/clio: Do not allow group locks with gid 0
  staging/lustre/llite: don't add to page cache upon failure
  staging/lustre/llite: Add exception entry check after radix_tree
  staging/lustre/libcfs: protect kkuc_groups from write access
  staging/lustre/fld: refer to MDT0 for fld lookup in some cases
  staging/lustre/llite: Solve a race to access lli_has_smd in read case
  staging/lustre/ptlrpc: hold rq_lock when modify rq_flags
  staging/lustre/lnet: portal spreading rotor should be unsigned
  ...

8 files changed, 240 insertions, 1067 deletions

diff --git a/include/dt-bindings/iio/qcom,spmi-vadc.h b/include/dt-bindings/iio/qcom,spmi-vadc.h
new file mode 100644
index 000000000000..42121fa238fa
--- /dev/null
+++ b/include/dt-bindings/iio/qcom,spmi-vadc.h
@@ -0,0 +1,119 @@
+/*
+ * Copyright (c) 2012-2014, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_QCOM_SPMI_VADC_H
+#define _DT_BINDINGS_QCOM_SPMI_VADC_H
+
+/* Voltage ADC channels */
+#define VADC_USBIN				0x00
+#define VADC_DCIN				0x01
+#define VADC_VCHG_SNS				0x02
+#define VADC_SPARE1_03				0x03
+#define VADC_USB_ID_MV				0x04
+#define VADC_VCOIN				0x05
+#define VADC_VBAT_SNS				0x06
+#define VADC_VSYS				0x07
+#define VADC_DIE_TEMP				0x08
+#define VADC_REF_625MV				0x09
+#define VADC_REF_1250MV				0x0a
+#define VADC_CHG_TEMP				0x0b
+#define VADC_SPARE1				0x0c
+#define VADC_SPARE2				0x0d
+#define VADC_GND_REF				0x0e
+#define VADC_VDD_VADC				0x0f
+
+#define VADC_P_MUX1_1_1				0x10
+#define VADC_P_MUX2_1_1				0x11
+#define VADC_P_MUX3_1_1				0x12
+#define VADC_P_MUX4_1_1				0x13
+#define VADC_P_MUX5_1_1				0x14
+#define VADC_P_MUX6_1_1				0x15
+#define VADC_P_MUX7_1_1				0x16
+#define VADC_P_MUX8_1_1				0x17
+#define VADC_P_MUX9_1_1				0x18
+#define VADC_P_MUX10_1_1			0x19
+#define VADC_P_MUX11_1_1			0x1a
+#define VADC_P_MUX12_1_1			0x1b
+#define VADC_P_MUX13_1_1			0x1c
+#define VADC_P_MUX14_1_1			0x1d
+#define VADC_P_MUX15_1_1			0x1e
+#define VADC_P_MUX16_1_1			0x1f
+
+#define VADC_P_MUX1_1_3				0x20
+#define VADC_P_MUX2_1_3				0x21
+#define VADC_P_MUX3_1_3				0x22
+#define VADC_P_MUX4_1_3				0x23
+#define VADC_P_MUX5_1_3				0x24
+#define VADC_P_MUX6_1_3				0x25
+#define VADC_P_MUX7_1_3				0x26
+#define VADC_P_MUX8_1_3				0x27
+#define VADC_P_MUX9_1_3				0x28
+#define VADC_P_MUX10_1_3			0x29
+#define VADC_P_MUX11_1_3			0x2a
+#define VADC_P_MUX12_1_3			0x2b
+#define VADC_P_MUX13_1_3			0x2c
+#define VADC_P_MUX14_1_3			0x2d
+#define VADC_P_MUX15_1_3			0x2e
+#define VADC_P_MUX16_1_3			0x2f
+
+#define VADC_LR_MUX1_BAT_THERM			0x30
+#define VADC_LR_MUX2_BAT_ID			0x31
+#define VADC_LR_MUX3_XO_THERM			0x32
+#define VADC_LR_MUX4_AMUX_THM1			0x33
+#define VADC_LR_MUX5_AMUX_THM2			0x34
+#define VADC_LR_MUX6_AMUX_THM3			0x35
+#define VADC_LR_MUX7_HW_ID			0x36
+#define VADC_LR_MUX8_AMUX_THM4			0x37
+#define VADC_LR_MUX9_AMUX_THM5			0x38
+#define VADC_LR_MUX10_USB_ID			0x39
+#define VADC_AMUX_PU1				0x3a
+#define VADC_AMUX_PU2				0x3b
+#define VADC_LR_MUX3_BUF_XO_THERM		0x3c
+
+#define VADC_LR_MUX1_PU1_BAT_THERM		0x70
+#define VADC_LR_MUX2_PU1_BAT_ID			0x71
+#define VADC_LR_MUX3_PU1_XO_THERM		0x72
+#define VADC_LR_MUX4_PU1_AMUX_THM1		0x73
+#define VADC_LR_MUX5_PU1_AMUX_THM2		0x74
+#define VADC_LR_MUX6_PU1_AMUX_THM3		0x75
+#define VADC_LR_MUX7_PU1_AMUX_HW_ID		0x76
+#define VADC_LR_MUX8_PU1_AMUX_THM4		0x77
+#define VADC_LR_MUX9_PU1_AMUX_THM5		0x78
+#define VADC_LR_MUX10_PU1_AMUX_USB_ID		0x79
+#define VADC_LR_MUX3_BUF_PU1_XO_THERM		0x7c
+
+#define VADC_LR_MUX1_PU2_BAT_THERM		0xb0
+#define VADC_LR_MUX2_PU2_BAT_ID			0xb1
+#define VADC_LR_MUX3_PU2_XO_THERM		0xb2
+#define VADC_LR_MUX4_PU2_AMUX_THM1		0xb3
+#define VADC_LR_MUX5_PU2_AMUX_THM2		0xb4
+#define VADC_LR_MUX6_PU2_AMUX_THM3		0xb5
+#define VADC_LR_MUX7_PU2_AMUX_HW_ID		0xb6
+#define VADC_LR_MUX8_PU2_AMUX_THM4		0xb7
+#define VADC_LR_MUX9_PU2_AMUX_THM5		0xb8
+#define VADC_LR_MUX10_PU2_AMUX_USB_ID		0xb9
+#define VADC_LR_MUX3_BUF_PU2_XO_THERM		0xbc
+
+#define VADC_LR_MUX1_PU1_PU2_BAT_THERM		0xf0
+#define VADC_LR_MUX2_PU1_PU2_BAT_ID		0xf1
+#define VADC_LR_MUX3_PU1_PU2_XO_THERM		0xf2
+#define VADC_LR_MUX4_PU1_PU2_AMUX_THM1		0xf3
+#define VADC_LR_MUX5_PU1_PU2_AMUX_THM2		0xf4
+#define VADC_LR_MUX6_PU1_PU2_AMUX_THM3		0xf5
+#define VADC_LR_MUX7_PU1_PU2_AMUX_HW_ID		0xf6
+#define VADC_LR_MUX8_PU1_PU2_AMUX_THM4		0xf7
+#define VADC_LR_MUX9_PU1_PU2_AMUX_THM5		0xf8
+#define VADC_LR_MUX10_PU1_PU2_AMUX_USB_ID	0xf9
+#define VADC_LR_MUX3_BUF_PU1_PU2_XO_THERM	0xfc
+
+#endif /* _DT_BINDINGS_QCOM_SPMI_VADC_H */
diff --git a/include/linux/i2o.h b/include/linux/i2o.h
deleted file mode 100644
index d23c3c20b201..000000000000
--- a/include/linux/i2o.h
+++ /dev/null
@@ -1,988 +0,0 @@
-/*
- * I2O kernel space accessible structures/APIs
- *
- * (c) Copyright 1999, 2000 Red Hat Software
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- *************************************************************************
- *
- * This header file defined the I2O APIs/structures for use by
- * the I2O kernel modules.
- *
- */
-
-#ifndef _I2O_H
-#define _I2O_H
-
-#include <linux/i2o-dev.h>
-
-/* How many different OSM's are we allowing */
-#define I2O_MAX_DRIVERS		8
-
-#include <linux/pci.h>
-#include <linux/bug.h>
-#include <linux/dma-mapping.h>
-#include <linux/string.h>
-#include <linux/slab.h>
-#include <linux/workqueue.h>	/* work_struct */
-#include <linux/mempool.h>
-#include <linux/mutex.h>
-#include <linux/scatterlist.h>
-#include <linux/semaphore.h>	/* Needed for MUTEX init macros */
-
-#include <asm/io.h>
-
-/* message queue empty */
-#define I2O_QUEUE_EMPTY		0xffffffff
-
-/*
- *	Cache strategies
- */
-
-/*	The NULL strategy leaves everything up to the controller. This tends to be a
- *	pessimal but functional choice.
- */
-#define CACHE_NULL		0
-/*	Prefetch data when reading. We continually attempt to load the next 32 sectors
- *	into the controller cache.
- */
-#define CACHE_PREFETCH		1
-/*	Prefetch data when reading. We sometimes attempt to load the next 32 sectors
- *	into the controller cache. When an I/O is less <= 8K we assume its probably
- *	not sequential and don't prefetch (default)
- */
-#define CACHE_SMARTFETCH	2
-/*	Data is written to the cache and then out on to the disk. The I/O must be
- *	physically on the medium before the write is acknowledged (default without
- *	NVRAM)
- */
-#define CACHE_WRITETHROUGH	17
-/*	Data is written to the cache and then out on to the disk. The controller
- *	is permitted to write back the cache any way it wants. (default if battery
- *	backed NVRAM is present). It can be useful to set this for swap regardless of
- *	battery state.
- */
-#define CACHE_WRITEBACK		18
-/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
- *	write large I/O's directly to disk bypassing the cache to avoid the extra
- *	memory copy hits. Small writes are writeback cached
- */
-#define CACHE_SMARTBACK		19
-/*	Optimise for under powered controllers, especially on RAID1 and RAID0. We
- *	write large I/O's directly to disk bypassing the cache to avoid the extra
- *	memory copy hits. Small writes are writethrough cached. Suitable for devices
- *	lacking battery backup
- */
-#define CACHE_SMARTTHROUGH	20
-
-/*
- *	Ioctl structures
- */
-
-#define 	BLKI2OGRSTRAT	_IOR('2', 1, int)
-#define 	BLKI2OGWSTRAT	_IOR('2', 2, int)
-#define 	BLKI2OSRSTRAT	_IOW('2', 3, int)
-#define 	BLKI2OSWSTRAT	_IOW('2', 4, int)
-
-/*
- *	I2O Function codes
- */
-
-/*
- *	Executive Class
- */
-#define	I2O_CMD_ADAPTER_ASSIGN		0xB3
-#define	I2O_CMD_ADAPTER_READ		0xB2
-#define	I2O_CMD_ADAPTER_RELEASE		0xB5
-#define	I2O_CMD_BIOS_INFO_SET		0xA5
-#define	I2O_CMD_BOOT_DEVICE_SET		0xA7
-#define	I2O_CMD_CONFIG_VALIDATE		0xBB
-#define	I2O_CMD_CONN_SETUP		0xCA
-#define	I2O_CMD_DDM_DESTROY		0xB1
-#define	I2O_CMD_DDM_ENABLE		0xD5
-#define	I2O_CMD_DDM_QUIESCE		0xC7
-#define	I2O_CMD_DDM_RESET		0xD9
-#define	I2O_CMD_DDM_SUSPEND		0xAF
-#define	I2O_CMD_DEVICE_ASSIGN		0xB7
-#define	I2O_CMD_DEVICE_RELEASE		0xB9
-#define	I2O_CMD_HRT_GET			0xA8
-#define	I2O_CMD_ADAPTER_CLEAR		0xBE
-#define	I2O_CMD_ADAPTER_CONNECT		0xC9
-#define	I2O_CMD_ADAPTER_RESET		0xBD
-#define	I2O_CMD_LCT_NOTIFY		0xA2
-#define	I2O_CMD_OUTBOUND_INIT		0xA1
-#define	I2O_CMD_PATH_ENABLE		0xD3
-#define	I2O_CMD_PATH_QUIESCE		0xC5
-#define	I2O_CMD_PATH_RESET		0xD7
-#define	I2O_CMD_STATIC_MF_CREATE	0xDD
-#define	I2O_CMD_STATIC_MF_RELEASE	0xDF
-#define	I2O_CMD_STATUS_GET		0xA0
-#define	I2O_CMD_SW_DOWNLOAD		0xA9
-#define	I2O_CMD_SW_UPLOAD		0xAB
-#define	I2O_CMD_SW_REMOVE		0xAD
-#define	I2O_CMD_SYS_ENABLE		0xD1
-#define	I2O_CMD_SYS_MODIFY		0xC1
-#define	I2O_CMD_SYS_QUIESCE		0xC3
-#define	I2O_CMD_SYS_TAB_SET		0xA3
-
-/*
- * Utility Class
- */
-#define I2O_CMD_UTIL_NOP		0x00
-#define I2O_CMD_UTIL_ABORT		0x01
-#define I2O_CMD_UTIL_CLAIM		0x09
-#define I2O_CMD_UTIL_RELEASE		0x0B
-#define I2O_CMD_UTIL_PARAMS_GET		0x06
-#define I2O_CMD_UTIL_PARAMS_SET		0x05
-#define I2O_CMD_UTIL_EVT_REGISTER	0x13
-#define I2O_CMD_UTIL_EVT_ACK		0x14
-#define I2O_CMD_UTIL_CONFIG_DIALOG	0x10
-#define I2O_CMD_UTIL_DEVICE_RESERVE	0x0D
-#define I2O_CMD_UTIL_DEVICE_RELEASE	0x0F
-#define I2O_CMD_UTIL_LOCK		0x17
-#define I2O_CMD_UTIL_LOCK_RELEASE	0x19
-#define I2O_CMD_UTIL_REPLY_FAULT_NOTIFY	0x15
-
-/*
- * SCSI Host Bus Adapter Class
- */
-#define I2O_CMD_SCSI_EXEC		0x81
-#define I2O_CMD_SCSI_ABORT		0x83
-#define I2O_CMD_SCSI_BUSRESET		0x27
-
-/*
- * Bus Adapter Class
- */
-#define I2O_CMD_BUS_ADAPTER_RESET	0x85
-#define I2O_CMD_BUS_RESET		0x87
-#define I2O_CMD_BUS_SCAN		0x89
-#define I2O_CMD_BUS_QUIESCE		0x8b
-
-/*
- * Random Block Storage Class
- */
-#define I2O_CMD_BLOCK_READ		0x30
-#define I2O_CMD_BLOCK_WRITE		0x31
-#define I2O_CMD_BLOCK_CFLUSH		0x37
-#define I2O_CMD_BLOCK_MLOCK		0x49
-#define I2O_CMD_BLOCK_MUNLOCK		0x4B
-#define I2O_CMD_BLOCK_MMOUNT		0x41
-#define I2O_CMD_BLOCK_MEJECT		0x43
-#define I2O_CMD_BLOCK_POWER		0x70
-
-#define I2O_CMD_PRIVATE			0xFF
-
-/* Command status values  */
-
-#define I2O_CMD_IN_PROGRESS	0x01
-#define I2O_CMD_REJECTED	0x02
-#define I2O_CMD_FAILED		0x03
-#define I2O_CMD_COMPLETED	0x04
-
-/* I2O API function return values */
-
-#define I2O_RTN_NO_ERROR			0
-#define I2O_RTN_NOT_INIT			1
-#define I2O_RTN_FREE_Q_EMPTY			2
-#define I2O_RTN_TCB_ERROR			3
-#define I2O_RTN_TRANSACTION_ERROR		4
-#define I2O_RTN_ADAPTER_ALREADY_INIT		5
-#define I2O_RTN_MALLOC_ERROR			6
-#define I2O_RTN_ADPTR_NOT_REGISTERED		7
-#define I2O_RTN_MSG_REPLY_TIMEOUT		8
-#define I2O_RTN_NO_STATUS			9
-#define I2O_RTN_NO_FIRM_VER			10
-#define	I2O_RTN_NO_LINK_SPEED			11
-
-/* Reply message status defines for all messages */
-
-#define I2O_REPLY_STATUS_SUCCESS                    	0x00
-#define I2O_REPLY_STATUS_ABORT_DIRTY                	0x01
-#define I2O_REPLY_STATUS_ABORT_NO_DATA_TRANSFER     	0x02
-#define	I2O_REPLY_STATUS_ABORT_PARTIAL_TRANSFER		0x03
-#define	I2O_REPLY_STATUS_ERROR_DIRTY			0x04
-#define	I2O_REPLY_STATUS_ERROR_NO_DATA_TRANSFER		0x05
-#define	I2O_REPLY_STATUS_ERROR_PARTIAL_TRANSFER		0x06
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_DIRTY		0x08
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_NO_DATA_TRANSFER	0x09
-#define	I2O_REPLY_STATUS_PROCESS_ABORT_PARTIAL_TRANSFER	0x0A
-#define	I2O_REPLY_STATUS_TRANSACTION_ERROR		0x0B
-#define	I2O_REPLY_STATUS_PROGRESS_REPORT		0x80
-
-/* Status codes and Error Information for Parameter functions */
-
-#define I2O_PARAMS_STATUS_SUCCESS		0x00
-#define I2O_PARAMS_STATUS_BAD_KEY_ABORT		0x01
-#define I2O_PARAMS_STATUS_BAD_KEY_CONTINUE   	0x02
-#define I2O_PARAMS_STATUS_BUFFER_FULL		0x03
-#define I2O_PARAMS_STATUS_BUFFER_TOO_SMALL	0x04
-#define I2O_PARAMS_STATUS_FIELD_UNREADABLE	0x05
-#define I2O_PARAMS_STATUS_FIELD_UNWRITEABLE	0x06
-#define I2O_PARAMS_STATUS_INSUFFICIENT_FIELDS	0x07
-#define I2O_PARAMS_STATUS_INVALID_GROUP_ID	0x08
-#define I2O_PARAMS_STATUS_INVALID_OPERATION	0x09
-#define I2O_PARAMS_STATUS_NO_KEY_FIELD		0x0A
-#define I2O_PARAMS_STATUS_NO_SUCH_FIELD		0x0B
-#define I2O_PARAMS_STATUS_NON_DYNAMIC_GROUP	0x0C
-#define I2O_PARAMS_STATUS_OPERATION_ERROR	0x0D
-#define I2O_PARAMS_STATUS_SCALAR_ERROR		0x0E
-#define I2O_PARAMS_STATUS_TABLE_ERROR		0x0F
-#define I2O_PARAMS_STATUS_WRONG_GROUP_TYPE	0x10
-
-/* DetailedStatusCode defines for Executive, DDM, Util and Transaction error
- * messages: Table 3-2 Detailed Status Codes.*/
-
-#define I2O_DSC_SUCCESS                        0x0000
-#define I2O_DSC_BAD_KEY                        0x0002
-#define I2O_DSC_TCL_ERROR                      0x0003
-#define I2O_DSC_REPLY_BUFFER_FULL              0x0004
-#define I2O_DSC_NO_SUCH_PAGE                   0x0005
-#define I2O_DSC_INSUFFICIENT_RESOURCE_SOFT     0x0006
-#define I2O_DSC_INSUFFICIENT_RESOURCE_HARD     0x0007
-#define I2O_DSC_CHAIN_BUFFER_TOO_LARGE         0x0009
-#define I2O_DSC_UNSUPPORTED_FUNCTION           0x000A
-#define I2O_DSC_DEVICE_LOCKED                  0x000B
-#define I2O_DSC_DEVICE_RESET                   0x000C
-#define I2O_DSC_INAPPROPRIATE_FUNCTION         0x000D
-#define I2O_DSC_INVALID_INITIATOR_ADDRESS      0x000E
-#define I2O_DSC_INVALID_MESSAGE_FLAGS          0x000F
-#define I2O_DSC_INVALID_OFFSET                 0x0010
-#define I2O_DSC_INVALID_PARAMETER              0x0011
-#define I2O_DSC_INVALID_REQUEST                0x0012
-#define I2O_DSC_INVALID_TARGET_ADDRESS         0x0013
-#define I2O_DSC_MESSAGE_TOO_LARGE              0x0014
-#define I2O_DSC_MESSAGE_TOO_SMALL              0x0015
-#define I2O_DSC_MISSING_PARAMETER              0x0016
-#define I2O_DSC_TIMEOUT                        0x0017
-#define I2O_DSC_UNKNOWN_ERROR                  0x0018
-#define I2O_DSC_UNKNOWN_FUNCTION               0x0019
-#define I2O_DSC_UNSUPPORTED_VERSION            0x001A
-#define I2O_DSC_DEVICE_BUSY                    0x001B
-#define I2O_DSC_DEVICE_NOT_AVAILABLE           0x001C
-
-/* DetailedStatusCode defines for Block Storage Operation: Table 6-7 Detailed
-   Status Codes.*/
-
-#define I2O_BSA_DSC_SUCCESS               0x0000
-#define I2O_BSA_DSC_MEDIA_ERROR           0x0001
-#define I2O_BSA_DSC_ACCESS_ERROR          0x0002
-#define I2O_BSA_DSC_DEVICE_FAILURE        0x0003
-#define I2O_BSA_DSC_DEVICE_NOT_READY      0x0004
-#define I2O_BSA_DSC_MEDIA_NOT_PRESENT     0x0005
-#define I2O_BSA_DSC_MEDIA_LOCKED          0x0006
-#define I2O_BSA_DSC_MEDIA_FAILURE         0x0007
-#define I2O_BSA_DSC_PROTOCOL_FAILURE      0x0008
-#define I2O_BSA_DSC_BUS_FAILURE           0x0009
-#define I2O_BSA_DSC_ACCESS_VIOLATION      0x000A
-#define I2O_BSA_DSC_WRITE_PROTECTED       0x000B
-#define I2O_BSA_DSC_DEVICE_RESET          0x000C
-#define I2O_BSA_DSC_VOLUME_CHANGED        0x000D
-#define I2O_BSA_DSC_TIMEOUT               0x000E
-
-/* FailureStatusCodes, Table 3-3 Message Failure Codes */
-
-#define I2O_FSC_TRANSPORT_SERVICE_SUSPENDED             0x81
-#define I2O_FSC_TRANSPORT_SERVICE_TERMINATED            0x82
-#define I2O_FSC_TRANSPORT_CONGESTION                    0x83
-#define I2O_FSC_TRANSPORT_FAILURE                       0x84
-#define I2O_FSC_TRANSPORT_STATE_ERROR                   0x85
-#define I2O_FSC_TRANSPORT_TIME_OUT                      0x86
-#define I2O_FSC_TRANSPORT_ROUTING_FAILURE               0x87
-#define I2O_FSC_TRANSPORT_INVALID_VERSION               0x88
-#define I2O_FSC_TRANSPORT_INVALID_OFFSET                0x89
-#define I2O_FSC_TRANSPORT_INVALID_MSG_FLAGS             0x8A
-#define I2O_FSC_TRANSPORT_FRAME_TOO_SMALL               0x8B
-#define I2O_FSC_TRANSPORT_FRAME_TOO_LARGE               0x8C
-#define I2O_FSC_TRANSPORT_INVALID_TARGET_ID             0x8D
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_ID          0x8E
-#define I2O_FSC_TRANSPORT_INVALID_INITIATOR_CONTEXT     0x8F
-#define I2O_FSC_TRANSPORT_UNKNOWN_FAILURE               0xFF
-
-/* Device Claim Types */
-#define	I2O_CLAIM_PRIMARY					0x01000000
-#define	I2O_CLAIM_MANAGEMENT					0x02000000
-#define	I2O_CLAIM_AUTHORIZED					0x03000000
-#define	I2O_CLAIM_SECONDARY					0x04000000
-
-/* Message header defines for VersionOffset */
-#define I2OVER15	0x0001
-#define I2OVER20	0x0002
-
-/* Default is 1.5 */
-#define I2OVERSION	I2OVER15
-
-#define SGL_OFFSET_0    I2OVERSION
-#define SGL_OFFSET_4    (0x0040 | I2OVERSION)
-#define SGL_OFFSET_5    (0x0050 | I2OVERSION)
-#define SGL_OFFSET_6    (0x0060 | I2OVERSION)
-#define SGL_OFFSET_7    (0x0070 | I2OVERSION)
-#define SGL_OFFSET_8    (0x0080 | I2OVERSION)
-#define SGL_OFFSET_9    (0x0090 | I2OVERSION)
-#define SGL_OFFSET_10   (0x00A0 | I2OVERSION)
-#define SGL_OFFSET_11   (0x00B0 | I2OVERSION)
-#define SGL_OFFSET_12   (0x00C0 | I2OVERSION)
-#define SGL_OFFSET(x)   (((x)<<4) | I2OVERSION)
-
-/* Transaction Reply Lists (TRL) Control Word structure */
-#define TRL_SINGLE_FIXED_LENGTH		0x00
-#define TRL_SINGLE_VARIABLE_LENGTH	0x40
-#define TRL_MULTIPLE_FIXED_LENGTH	0x80
-
- /* msg header defines for MsgFlags */
-#define MSG_STATIC	0x0100
-#define MSG_64BIT_CNTXT	0x0200
-#define MSG_MULTI_TRANS	0x1000
-#define MSG_FAIL	0x2000
-#define MSG_FINAL	0x4000
-#define MSG_REPLY	0x8000
-
- /* minimum size msg */
-#define THREE_WORD_MSG_SIZE	0x00030000
-#define FOUR_WORD_MSG_SIZE	0x00040000
-#define FIVE_WORD_MSG_SIZE	0x00050000
-#define SIX_WORD_MSG_SIZE	0x00060000
-#define SEVEN_WORD_MSG_SIZE	0x00070000
-#define EIGHT_WORD_MSG_SIZE	0x00080000
-#define NINE_WORD_MSG_SIZE	0x00090000
-#define TEN_WORD_MSG_SIZE	0x000A0000
-#define ELEVEN_WORD_MSG_SIZE	0x000B0000
-#define I2O_MESSAGE_SIZE(x)	((x)<<16)
-
-/* special TID assignments */
-#define ADAPTER_TID		0
-#define HOST_TID		1
-
-/* outbound queue defines */
-#define I2O_MAX_OUTBOUND_MSG_FRAMES	128
-#define I2O_OUTBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
-
-/* inbound queue definitions */
-#define I2O_MSG_INPOOL_MIN		32
-#define I2O_INBOUND_MSG_FRAME_SIZE	128	/* in 32-bit words */
-
-#define I2O_POST_WAIT_OK	0
-#define I2O_POST_WAIT_TIMEOUT	-ETIMEDOUT
-
-#define I2O_CONTEXT_LIST_MIN_LENGTH	15
-#define I2O_CONTEXT_LIST_USED		0x01
-#define I2O_CONTEXT_LIST_DELETED	0x02
-
-/* timeouts */
-#define I2O_TIMEOUT_INIT_OUTBOUND_QUEUE	15
-#define I2O_TIMEOUT_MESSAGE_GET		5
-#define I2O_TIMEOUT_RESET		30
-#define I2O_TIMEOUT_STATUS_GET		5
-#define I2O_TIMEOUT_LCT_GET		360
-#define I2O_TIMEOUT_SCSI_SCB_ABORT	240
-
-/* retries */
-#define I2O_HRT_GET_TRIES		3
-#define I2O_LCT_GET_TRIES		3
-
-/* defines for max_sectors and max_phys_segments */
-#define I2O_MAX_SECTORS			1024
-#define I2O_MAX_SECTORS_LIMITED		128
-#define I2O_MAX_PHYS_SEGMENTS		BLK_MAX_SEGMENTS
-
-/*
- *	Message structures
- */
-struct i2o_message {
-	union {
-		struct {
-			u8 version_offset;
-			u8 flags;
-			u16 size;
-			u32 target_tid:12;
-			u32 init_tid:12;
-			u32 function:8;
-			u32 icntxt;	/* initiator context */
-			u32 tcntxt;	/* transaction context */
-		} s;
-		u32 head[4];
-	} u;
-	/* List follows */
-	u32 body[0];
-};
-
-/* MFA and I2O message used by mempool */
-struct i2o_msg_mfa {
-	u32 mfa;		/* MFA returned by the controller */
-	struct i2o_message msg;	/* I2O message */
-};
-
-/*
- *	Each I2O device entity has one of these. There is one per device.
- */
-struct i2o_device {
-	i2o_lct_entry lct_data;	/* Device LCT information */
-
-	struct i2o_controller *iop;	/* Controlling IOP */
-	struct list_head list;	/* node in IOP devices list */
-
-	struct device device;
-
-	struct mutex lock;	/* device lock */
-};
-
-/*
- *	Event structure provided to the event handling function
- */
-struct i2o_event {
-	struct work_struct work;
-	struct i2o_device *i2o_dev;	/* I2O device pointer from which the
-					   event reply was initiated */
-	u16 size;		/* Size of data in 32-bit words */
-	u32 tcntxt;		/* Transaction context used at
-				   registration */
-	u32 event_indicator;	/* Event indicator from reply */
-	u32 data[0];		/* Event data from reply */
-};
-
-/*
- *	I2O classes which could be handled by the OSM
- */
-struct i2o_class_id {
-	u16 class_id:12;
-};
-
-/*
- *	I2O driver structure for OSMs
- */
-struct i2o_driver {
-	char *name;		/* OSM name */
-	int context;		/* Low 8 bits of the transaction info */
-	struct i2o_class_id *classes;	/* I2O classes that this OSM handles */
-
-	/* Message reply handler */
-	int (*reply) (struct i2o_controller *, u32, struct i2o_message *);
-
-	/* Event handler */
-	work_func_t event;
-
-	struct workqueue_struct *event_queue;	/* Event queue */
-
-	struct device_driver driver;
-
-	/* notification of changes */
-	void (*notify_controller_add) (struct i2o_controller *);
-	void (*notify_controller_remove) (struct i2o_controller *);
-	void (*notify_device_add) (struct i2o_device *);
-	void (*notify_device_remove) (struct i2o_device *);
-
-	struct semaphore lock;
-};
-
-/*
- *	Contains DMA mapped address information
- */
-struct i2o_dma {
-	void *virt;
-	dma_addr_t phys;
-	size_t len;
-};
-
-/*
- *	Contains slab cache and mempool information
- */
-struct i2o_pool {
-	char *name;
-	struct kmem_cache *slab;
-	mempool_t *mempool;
-};
-
-/*
- *	Contains IO mapped address information
- */
-struct i2o_io {
-	void __iomem *virt;
-	unsigned long phys;
-	unsigned long len;
-};
-
-/*
- *	Context queue entry, used for 32-bit context on 64-bit systems
- */
-struct i2o_context_list_element {
-	struct list_head list;
-	u32 context;
-	void *ptr;
-	unsigned long timestamp;
-};
-
-/*
- * Each I2O controller has one of these objects
- */
-struct i2o_controller {
-	char name[16];
-	int unit;
-	int type;
-
-	struct pci_dev *pdev;	/* PCI device */
-
-	unsigned int promise:1;	/* Promise controller */
-	unsigned int adaptec:1;	/* DPT / Adaptec controller */
-	unsigned int raptor:1;	/* split bar */
-	unsigned int no_quiesce:1;	/* dont quiesce before reset */
-	unsigned int short_req:1;	/* use small block sizes */
-	unsigned int limit_sectors:1;	/* limit number of sectors / request */
-	unsigned int pae_support:1;	/* controller has 64-bit SGL support */
-
-	struct list_head devices;	/* list of I2O devices */
-	struct list_head list;	/* Controller list */
-
-	void __iomem *in_port;	/* Inbout port address */
-	void __iomem *out_port;	/* Outbound port address */
-	void __iomem *irq_status;	/* Interrupt status register address */
-	void __iomem *irq_mask;	/* Interrupt mask register address */
-
-	struct i2o_dma status;	/* IOP status block */
-
-	struct i2o_dma hrt;	/* HW Resource Table */
-	i2o_lct *lct;		/* Logical Config Table */
-	struct i2o_dma dlct;	/* Temp LCT */
-	struct mutex lct_lock;	/* Lock for LCT updates */
-	struct i2o_dma status_block;	/* IOP status block */
-
-	struct i2o_io base;	/* controller messaging unit */
-	struct i2o_io in_queue;	/* inbound message queue Host->IOP */
-	struct i2o_dma out_queue;	/* outbound message queue IOP->Host */
-
-	struct i2o_pool in_msg;	/* mempool for inbound messages */
-
-	unsigned int battery:1;	/* Has a battery backup */
-	unsigned int io_alloc:1;	/* An I/O resource was allocated */
-	unsigned int mem_alloc:1;	/* A memory resource was allocated */
-
-	struct resource io_resource;	/* I/O resource allocated to the IOP */
-	struct resource mem_resource;	/* Mem resource allocated to the IOP */
-
-	struct device device;
-	struct i2o_device *exec;	/* Executive */
-#if BITS_PER_LONG == 64
-	spinlock_t context_list_lock;	/* lock for context_list */
-	atomic_t context_list_counter;	/* needed for unique contexts */
-	struct list_head context_list;	/* list of context id's
-					   and pointers */
-#endif
-	spinlock_t lock;	/* lock for controller
-				   configuration */
-	void *driver_data[I2O_MAX_DRIVERS];	/* storage for drivers */
-};
-
-/*
- * I2O System table entry
- *
- * The system table contains information about all the IOPs in the
- * system.  It is sent to all IOPs so that they can create peer2peer
- * connections between them.
- */
-struct i2o_sys_tbl_entry {
-	u16 org_id;
-	u16 reserved1;
-	u32 iop_id:12;
-	u32 reserved2:20;
-	u16 seg_num:12;
-	u16 i2o_version:4;
-	u8 iop_state;
-	u8 msg_type;
-	u16 frame_size;
-	u16 reserved3;
-	u32 last_changed;
-	u32 iop_capabilities;
-	u32 inbound_low;
-	u32 inbound_high;
-};
-
-struct i2o_sys_tbl {
-	u8 num_entries;
-	u8 version;
-	u16 reserved1;
-	u32 change_ind;
-	u32 reserved2;
-	u32 reserved3;
-	struct i2o_sys_tbl_entry iops[0];
-};
-
-extern struct list_head i2o_controllers;
-
-/* Message functions */
-extern struct i2o_message *i2o_msg_get_wait(struct i2o_controller *, int);
-extern int i2o_msg_post_wait_mem(struct i2o_controller *, struct i2o_message *,
-				 unsigned long, struct i2o_dma *);
-
-/* IOP functions */
-extern int i2o_status_get(struct i2o_controller *);
-
-extern int i2o_event_register(struct i2o_device *, struct i2o_driver *, int,
-			      u32);
-extern struct i2o_device *i2o_iop_find_device(struct i2o_controller *, u16);
-extern struct i2o_controller *i2o_find_iop(int);
-
-/* Functions needed for handling 64-bit pointers in 32-bit context */
-#if BITS_PER_LONG == 64
-extern u32 i2o_cntxt_list_add(struct i2o_controller *, void *);
-extern void *i2o_cntxt_list_get(struct i2o_controller *, u32);
-extern u32 i2o_cntxt_list_remove(struct i2o_controller *, void *);
-extern u32 i2o_cntxt_list_get_ptr(struct i2o_controller *, void *);
-
-static inline u32 i2o_ptr_low(void *ptr)
-{
-	return (u32) (u64) ptr;
-};
-
-static inline u32 i2o_ptr_high(void *ptr)
-{
-	return (u32) ((u64) ptr >> 32);
-};
-
-static inline u32 i2o_dma_low(dma_addr_t dma_addr)
-{
-	return (u32) (u64) dma_addr;
-};
-
-static inline u32 i2o_dma_high(dma_addr_t dma_addr)
-{
-	return (u32) ((u64) dma_addr >> 32);
-};
-#else
-static inline u32 i2o_cntxt_list_add(struct i2o_controller *c, void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline void *i2o_cntxt_list_get(struct i2o_controller *c, u32 context)
-{
-	return (void *)context;
-};
-
-static inline u32 i2o_cntxt_list_remove(struct i2o_controller *c, void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline u32 i2o_cntxt_list_get_ptr(struct i2o_controller *c, void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline u32 i2o_ptr_low(void *ptr)
-{
-	return (u32) ptr;
-};
-
-static inline u32 i2o_ptr_high(void *ptr)
-{
-	return 0;
-};
-
-static inline u32 i2o_dma_low(dma_addr_t dma_addr)
-{
-	return (u32) dma_addr;
-};
-
-static inline u32 i2o_dma_high(dma_addr_t dma_addr)
-{
-	return 0;
-};
-#endif
-
-extern u16 i2o_sg_tablesize(struct i2o_controller *c, u16 body_size);
-extern dma_addr_t i2o_dma_map_single(struct i2o_controller *c, void *ptr,
-					    size_t size,
-					    enum dma_data_direction direction,
-					    u32 ** sg_ptr);
-extern int i2o_dma_map_sg(struct i2o_controller *c,
-				 struct scatterlist *sg, int sg_count,
-				 enum dma_data_direction direction,
-				 u32 ** sg_ptr);
-extern int i2o_dma_alloc(struct device *dev, struct i2o_dma *addr, size_t len);
-extern void i2o_dma_free(struct device *dev, struct i2o_dma *addr);
-extern int i2o_dma_realloc(struct device *dev, struct i2o_dma *addr,
-								size_t len);
-extern int i2o_pool_alloc(struct i2o_pool *pool, const char *name,
-				 size_t size, int min_nr);
-extern void i2o_pool_free(struct i2o_pool *pool);
-/* I2O driver (OSM) functions */
-extern int i2o_driver_register(struct i2o_driver *);
-extern void i2o_driver_unregister(struct i2o_driver *);
-
-/**
- *	i2o_driver_notify_controller_add - Send notification of added controller
- *	@drv: I2O driver
- *	@c: I2O controller
- *
- *	Send notification of added controller to a single registered driver.
- */
-static inline void i2o_driver_notify_controller_add(struct i2o_driver *drv,
-						    struct i2o_controller *c)
-{
-	if (drv->notify_controller_add)
-		drv->notify_controller_add(c);
-};
-
-/**
- *	i2o_driver_notify_controller_remove - Send notification of removed controller
- *	@drv: I2O driver
- *	@c: I2O controller
- *
- *	Send notification of removed controller to a single registered driver.
- */
-static inline void i2o_driver_notify_controller_remove(struct i2o_driver *drv,
-						       struct i2o_controller *c)
-{
-	if (drv->notify_controller_remove)
-		drv->notify_controller_remove(c);
-};
-
-/**
- *	i2o_driver_notify_device_add - Send notification of added device
- *	@drv: I2O driver
- *	@i2o_dev: the added i2o_device
- *
- *	Send notification of added device to a single registered driver.
- */
-static inline void i2o_driver_notify_device_add(struct i2o_driver *drv,
-						struct i2o_device *i2o_dev)
-{
-	if (drv->notify_device_add)
-		drv->notify_device_add(i2o_dev);
-};
-
-/**
- *	i2o_driver_notify_device_remove - Send notification of removed device
- *	@drv: I2O driver
- *	@i2o_dev: the added i2o_device
- *
- *	Send notification of removed device to a single registered driver.
- */
-static inline void i2o_driver_notify_device_remove(struct i2o_driver *drv,
-						   struct i2o_device *i2o_dev)
-{
-	if (drv->notify_device_remove)
-		drv->notify_device_remove(i2o_dev);
-};
-
-extern void i2o_driver_notify_controller_add_all(struct i2o_controller *);
-extern void i2o_driver_notify_controller_remove_all(struct i2o_controller *);
-extern void i2o_driver_notify_device_add_all(struct i2o_device *);
-extern void i2o_driver_notify_device_remove_all(struct i2o_device *);
-
-/* I2O device functions */
-extern int i2o_device_claim(struct i2o_device *);
-extern int i2o_device_claim_release(struct i2o_device *);
-
-/* Exec OSM functions */
-extern int i2o_exec_lct_get(struct i2o_controller *);
-
-/* device / driver / kobject conversion functions */
-#define to_i2o_driver(drv) container_of(drv,struct i2o_driver, driver)
-#define to_i2o_device(dev) container_of(dev, struct i2o_device, device)
-#define to_i2o_controller(dev) container_of(dev, struct i2o_controller, device)
-
-/**
- *	i2o_out_to_virt - Turn an I2O message to a virtual address
- *	@c: controller
- *	@m: message engine value
- *
- *	Turn a receive message from an I2O controller bus address into
- *	a Linux virtual address. The shared page frame is a linear block
- *	so we simply have to shift the offset. This function does not
- *	work for sender side messages as they are ioremap objects
- *	provided by the I2O controller.
- */
-static inline struct i2o_message *i2o_msg_out_to_virt(struct i2o_controller *c,
-						      u32 m)
-{
-	BUG_ON(m < c->out_queue.phys
-	       || m >= c->out_queue.phys + c->out_queue.len);
-
-	return c->out_queue.virt + (m - c->out_queue.phys);
-};
-
-/**
- *	i2o_msg_in_to_virt - Turn an I2O message to a virtual address
- *	@c: controller
- *	@m: message engine value
- *
- *	Turn a send message from an I2O controller bus address into
- *	a Linux virtual address. The shared page frame is a linear block
- *	so we simply have to shift the offset. This function does not
- *	work for receive side messages as they are kmalloc objects
- *	in a different pool.
- */
-static inline struct i2o_message __iomem *i2o_msg_in_to_virt(struct
-							     i2o_controller *c,
-							     u32 m)
-{
-	return c->in_queue.virt + m;
-};
-
-/**
- *	i2o_msg_get - obtain an I2O message from the IOP
- *	@c: I2O controller
- *
- *	This function tries to get a message frame. If no message frame is
- *	available do not wait until one is available (see also i2o_msg_get_wait).
- *	The returned pointer to the message frame is not in I/O memory, it is
- *	allocated from a mempool. But because a MFA is allocated from the
- *	controller too it is guaranteed that i2o_msg_post() will never fail.
- *
- *	On a success a pointer to the message frame is returned. If the message
- *	queue is empty -EBUSY is returned and if no memory is available -ENOMEM
- *	is returned.
- */
-static inline struct i2o_message *i2o_msg_get(struct i2o_controller *c)
-{
-	struct i2o_msg_mfa *mmsg = mempool_alloc(c->in_msg.mempool, GFP_ATOMIC);
-	if (!mmsg)
-		return ERR_PTR(-ENOMEM);
-
-	mmsg->mfa = readl(c->in_port);
-	if (unlikely(mmsg->mfa >= c->in_queue.len)) {
-		u32 mfa = mmsg->mfa;
-
-		mempool_free(mmsg, c->in_msg.mempool);
-
-		if (mfa == I2O_QUEUE_EMPTY)
-			return ERR_PTR(-EBUSY);
-		return ERR_PTR(-EFAULT);
-	}
-
-	return &mmsg->msg;
-};
-
-/**
- *	i2o_msg_post - Post I2O message to I2O controller
- *	@c: I2O controller to which the message should be send
- *	@msg: message returned by i2o_msg_get()
- *
- *	Post the message to the I2O controller and return immediately.
- */
-static inline void i2o_msg_post(struct i2o_controller *c,
-				struct i2o_message *msg)
-{
-	struct i2o_msg_mfa *mmsg;
-
-	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
-	memcpy_toio(i2o_msg_in_to_virt(c, mmsg->mfa), msg,
-		    (le32_to_cpu(msg->u.head[0]) >> 16) << 2);
-	writel(mmsg->mfa, c->in_port);
-	mempool_free(mmsg, c->in_msg.mempool);
-};
-
-/**
- * 	i2o_msg_post_wait - Post and wait a message and wait until return
- *	@c: controller
- *	@msg: message to post
- *	@timeout: time in seconds to wait
- *
- * 	This API allows an OSM to post a message and then be told whether or
- *	not the system received a successful reply. If the message times out
- *	then the value '-ETIMEDOUT' is returned.
- *
- *	Returns 0 on success or negative error code on failure.
- */
-static inline int i2o_msg_post_wait(struct i2o_controller *c,
-				    struct i2o_message *msg,
-				    unsigned long timeout)
-{
-	return i2o_msg_post_wait_mem(c, msg, timeout, NULL);
-};
-
-/**
- *	i2o_msg_nop_mfa - Returns a fetched MFA back to the controller
- *	@c: I2O controller from which the MFA was fetched
- *	@mfa: MFA which should be returned
- *
- *	This function must be used for preserved messages, because i2o_msg_nop()
- *	also returns the allocated memory back to the msg_pool mempool.
- */
-static inline void i2o_msg_nop_mfa(struct i2o_controller *c, u32 mfa)
-{
-	struct i2o_message __iomem *msg;
-	u32 nop[3] = {
-		THREE_WORD_MSG_SIZE | SGL_OFFSET_0,
-		I2O_CMD_UTIL_NOP << 24 | HOST_TID << 12 | ADAPTER_TID,
-		0x00000000
-	};
-
-	msg = i2o_msg_in_to_virt(c, mfa);
-	memcpy_toio(msg, nop, sizeof(nop));
-	writel(mfa, c->in_port);
-};
-
-/**
- *	i2o_msg_nop - Returns a message which is not used
- *	@c: I2O controller from which the message was created
- *	@msg: message which should be returned
- *
- *	If you fetch a message via i2o_msg_get, and can't use it, you must
- *	return the message with this function. Otherwise the MFA is lost as well
- *	as the allocated memory from the mempool.
- */
-static inline void i2o_msg_nop(struct i2o_controller *c,
-			       struct i2o_message *msg)
-{
-	struct i2o_msg_mfa *mmsg;
-	mmsg = container_of(msg, struct i2o_msg_mfa, msg);
-
-	i2o_msg_nop_mfa(c, mmsg->mfa);
-	mempool_free(mmsg, c->in_msg.mempool);
-};
-
-/**
- *	i2o_flush_reply - Flush reply from I2O controller
- *	@c: I2O controller
- *	@m: the message identifier
- *
- *	The I2O controller must be informed that the reply message is not needed
- *	anymore. If you forget to flush the reply, the message frame can't be
- *	used by the controller anymore and is therefore lost.
- */
-static inline void i2o_flush_reply(struct i2o_controller *c, u32 m)
-{
-	writel(m, c->out_port);
-};
-
-/*
- *	Endian handling wrapped into the macro - keeps the core code
- *	cleaner.
- */
-
-#define i2o_raw_writel(val, mem)	__raw_writel(cpu_to_le32(val), mem)
-
-extern int i2o_parm_field_get(struct i2o_device *, int, int, void *, int);
-extern int i2o_parm_table_get(struct i2o_device *, int, int, int, void *, int,
-			      void *, int);
-
-/* debugging and troubleshooting/diagnostic helpers. */
-#define osm_printk(level, format, arg...)  \
-	printk(level "%s: " format, OSM_NAME , ## arg)
-
-#ifdef DEBUG
-#define osm_debug(format, arg...) \
-	osm_printk(KERN_DEBUG, format , ## arg)
-#else
-#define osm_debug(format, arg...) \
-        do { } while (0)
-#endif
-
-#define osm_err(format, arg...)		\
-	osm_printk(KERN_ERR, format , ## arg)
-#define osm_info(format, arg...)		\
-	osm_printk(KERN_INFO, format , ## arg)
-#define osm_warn(format, arg...)		\
-	osm_printk(KERN_WARNING, format , ## arg)
-
-/* debugging functions */
-extern void i2o_report_status(const char *, const char *, struct i2o_message *);
-extern void i2o_dump_message(struct i2o_message *);
-extern void i2o_dump_hrt(struct i2o_controller *c);
-extern void i2o_debug_state(struct i2o_controller *c);
-
-#endif				/* _I2O_H */
diff --git a/include/linux/iio/buffer.h b/include/linux/iio/buffer.h
index 519392763393..b65850a41127 100644
--- a/include/linux/iio/buffer.h
+++ b/include/linux/iio/buffer.h
@@ -25,9 +25,7 @@ struct iio_buffer;
  *			available.
  * @request_update:	if a parameter change has been marked, update underlying
  *			storage.
- * @get_bytes_per_datum:get current bytes per datum
  * @set_bytes_per_datum:set number of bytes per datum
- * @get_length:		get number of datums in buffer
  * @set_length:		set number of datums in buffer
  * @release:		called when the last reference to the buffer is dropped,
  *			should free all resources allocated by the buffer.
@@ -49,9 +47,7 @@ struct iio_buffer_access_funcs {
 
 	int (*request_update)(struct iio_buffer *buffer);
 
-	int (*get_bytes_per_datum)(struct iio_buffer *buffer);
 	int (*set_bytes_per_datum)(struct iio_buffer *buffer, size_t bpd);
-	int (*get_length)(struct iio_buffer *buffer);
 	int (*set_length)(struct iio_buffer *buffer, int length);
 
 	void (*release)(struct iio_buffer *buffer);
@@ -85,10 +81,11 @@ struct iio_buffer {
 	bool					scan_timestamp;
 	const struct iio_buffer_access_funcs	*access;
 	struct list_head			scan_el_dev_attr_list;
+	struct attribute_group			buffer_group;
 	struct attribute_group			scan_el_group;
 	wait_queue_head_t			pollq;
 	bool					stufftoread;
-	const struct attribute_group *attrs;
+	const struct attribute			**attrs;
 	struct list_head			demux_list;
 	void					*demux_bounce;
 	struct list_head			buffer_list;
@@ -117,15 +114,6 @@ int iio_scan_mask_query(struct iio_dev *indio_dev,
 			struct iio_buffer *buffer, int bit);
 
 /**
- * iio_scan_mask_set() - set particular bit in the scan mask
- * @indio_dev		IIO device structure
- * @buffer:		the buffer whose scan mask we are interested in
- * @bit:		the bit to be set.
- **/
-int iio_scan_mask_set(struct iio_dev *indio_dev,
-		      struct iio_buffer *buffer, int bit);
-
-/**
  * iio_push_to_buffers() - push to a registered buffer.
  * @indio_dev:		iio_dev structure for device.
  * @data:		Full scan.
@@ -159,56 +147,6 @@ static inline int iio_push_to_buffers_with_timestamp(struct iio_dev *indio_dev,
 
 int iio_update_demux(struct iio_dev *indio_dev);
 
-/**
- * iio_buffer_register() - register the buffer with IIO core
- * @indio_dev:		device with the buffer to be registered
- * @channels:		the channel descriptions used to construct buffer
- * @num_channels:	the number of channels
- **/
-int iio_buffer_register(struct iio_dev *indio_dev,
-			const struct iio_chan_spec *channels,
-			int num_channels);
-
-/**
- * iio_buffer_unregister() - unregister the buffer from IIO core
- * @indio_dev:		the device with the buffer to be unregistered
- **/
-void iio_buffer_unregister(struct iio_dev *indio_dev);
-
-/**
- * iio_buffer_read_length() - attr func to get number of datums in the buffer
- **/
-ssize_t iio_buffer_read_length(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf);
-/**
- * iio_buffer_write_length() - attr func to set number of datums in the buffer
- **/
-ssize_t iio_buffer_write_length(struct device *dev,
-			      struct device_attribute *attr,
-			      const char *buf,
-			      size_t len);
-/**
- * iio_buffer_store_enable() - attr to turn the buffer on
- **/
-ssize_t iio_buffer_store_enable(struct device *dev,
-				struct device_attribute *attr,
-				const char *buf,
-				size_t len);
-/**
- * iio_buffer_show_enable() - attr to see if the buffer is on
- **/
-ssize_t iio_buffer_show_enable(struct device *dev,
-			       struct device_attribute *attr,
-			       char *buf);
-#define IIO_BUFFER_LENGTH_ATTR DEVICE_ATTR(length, S_IRUGO | S_IWUSR,	\
-					   iio_buffer_read_length,	\
-					   iio_buffer_write_length)
-
-#define IIO_BUFFER_ENABLE_ATTR DEVICE_ATTR(enable, S_IRUGO | S_IWUSR,	\
-					   iio_buffer_show_enable,	\
-					   iio_buffer_store_enable)
-
 bool iio_validate_scan_mask_onehot(struct iio_dev *indio_dev,
 	const unsigned long *mask);
 
@@ -232,16 +170,6 @@ static inline void iio_device_attach_buffer(struct iio_dev *indio_dev,
 
 #else /* CONFIG_IIO_BUFFER */
 
-static inline int iio_buffer_register(struct iio_dev *indio_dev,
-					   const struct iio_chan_spec *channels,
-					   int num_channels)
-{
-	return 0;
-}
-
-static inline void iio_buffer_unregister(struct iio_dev *indio_dev)
-{}
-
 static inline void iio_buffer_get(struct iio_buffer *buffer) {}
 static inline void iio_buffer_put(struct iio_buffer *buffer) {}
 
diff --git a/include/linux/iio/common/ssp_sensors.h b/include/linux/iio/common/ssp_sensors.h
new file mode 100644
index 000000000000..f4d1b0edb432
--- /dev/null
+++ b/include/linux/iio/common/ssp_sensors.h
@@ -0,0 +1,82 @@
+/*
+ *  Copyright (C) 2014, Samsung Electronics Co. Ltd. All Rights Reserved.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License as published by
+ *  the Free Software Foundation; either version 2 of the License, or
+ *  (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ */
+#ifndef _SSP_SENSORS_H_
+#define _SSP_SENSORS_H_
+
+#include <linux/iio/iio.h>
+
+#define SSP_TIME_SIZE				4
+#define SSP_ACCELEROMETER_SIZE			6
+#define SSP_GYROSCOPE_SIZE			6
+#define SSP_BIO_HRM_RAW_SIZE			8
+#define SSP_BIO_HRM_RAW_FAC_SIZE		36
+#define SSP_BIO_HRM_LIB_SIZE			8
+
+/**
+ * enum ssp_sensor_type - SSP sensor type
+ */
+enum ssp_sensor_type {
+	SSP_ACCELEROMETER_SENSOR = 0,
+	SSP_GYROSCOPE_SENSOR,
+	SSP_GEOMAGNETIC_UNCALIB_SENSOR,
+	SSP_GEOMAGNETIC_RAW,
+	SSP_GEOMAGNETIC_SENSOR,
+	SSP_PRESSURE_SENSOR,
+	SSP_GESTURE_SENSOR,
+	SSP_PROXIMITY_SENSOR,
+	SSP_TEMPERATURE_HUMIDITY_SENSOR,
+	SSP_LIGHT_SENSOR,
+	SSP_PROXIMITY_RAW,
+	SSP_ORIENTATION_SENSOR,
+	SSP_STEP_DETECTOR,
+	SSP_SIG_MOTION_SENSOR,
+	SSP_GYRO_UNCALIB_SENSOR,
+	SSP_GAME_ROTATION_VECTOR,
+	SSP_ROTATION_VECTOR,
+	SSP_STEP_COUNTER,
+	SSP_BIO_HRM_RAW,
+	SSP_BIO_HRM_RAW_FAC,
+	SSP_BIO_HRM_LIB,
+	SSP_SENSOR_MAX,
+};
+
+struct ssp_data;
+
+/**
+ * struct ssp_sensor_data - Sensor object
+ * @process_data:	Callback to feed sensor data.
+ * @type:		Used sensor type.
+ * @buffer:		Received data buffer.
+ */
+struct ssp_sensor_data {
+	int (*process_data)(struct iio_dev *indio_dev, void *buf,
+			    int64_t timestamp);
+	enum ssp_sensor_type type;
+	u8 *buffer;
+};
+
+void ssp_register_consumer(struct iio_dev *indio_dev,
+			   enum ssp_sensor_type type);
+
+int ssp_enable_sensor(struct ssp_data *data, enum ssp_sensor_type type,
+		      u32 delay);
+
+int ssp_disable_sensor(struct ssp_data *data, enum ssp_sensor_type type);
+
+u32 ssp_get_sensor_delay(struct ssp_data *data, enum ssp_sensor_type);
+
+int ssp_change_delay(struct ssp_data *data, enum ssp_sensor_type type,
+		     u32 delay);
+#endif /* _SSP_SENSORS_H_ */
diff --git a/include/linux/iio/consumer.h b/include/linux/iio/consumer.h
index 651f9a0e2765..26fb8f6342bb 100644
--- a/include/linux/iio/consumer.h
+++ b/include/linux/iio/consumer.h
@@ -151,6 +151,16 @@ int iio_read_channel_average_raw(struct iio_channel *chan, int *val);
 int iio_read_channel_processed(struct iio_channel *chan, int *val);
 
 /**
+ * iio_write_channel_raw() - write to a given channel
+ * @chan:		The channel being queried.
+ * @val:		Value being written.
+ *
+ * Note raw writes to iio channels are in dac counts and hence
+ * scale will need to be applied if standard units required.
+ */
+int iio_write_channel_raw(struct iio_channel *chan, int val);
+
+/**
  * iio_get_channel_type() - get the type of a channel
  * @channel:		The channel being queried.
  * @type:		The type of the channel.
@@ -191,7 +201,7 @@ int iio_read_channel_scale(struct iio_channel *chan, int *val,
  * The scale factor allows to increase the precession of the returned value. For
  * a scale factor of 1 the function will return the result in the normal IIO
  * unit for the channel type. E.g. millivolt for voltage channels, if you want
- * nanovolts instead pass 1000 as the scale factor.
+ * nanovolts instead pass 1000000 as the scale factor.
  */
 int iio_convert_raw_to_processed(struct iio_channel *chan, int raw,
 	int *processed, unsigned int scale);
diff --git a/include/linux/iio/iio.h b/include/linux/iio/iio.h
index 3642ce7ef512..80d855061064 100644
--- a/include/linux/iio/iio.h
+++ b/include/linux/iio/iio.h
@@ -38,6 +38,11 @@ enum iio_chan_info_enum {
 	IIO_CHAN_INFO_HARDWAREGAIN,
 	IIO_CHAN_INFO_HYSTERESIS,
 	IIO_CHAN_INFO_INT_TIME,
+	IIO_CHAN_INFO_ENABLE,
+	IIO_CHAN_INFO_CALIBHEIGHT,
+	IIO_CHAN_INFO_CALIBWEIGHT,
+	IIO_CHAN_INFO_DEBOUNCE_COUNT,
+	IIO_CHAN_INFO_DEBOUNCE_TIME,
 };
 
 enum iio_shared_by {
@@ -284,10 +289,11 @@ static inline s64 iio_get_time_ns(void)
 /* Device operating modes */
 #define INDIO_DIRECT_MODE		0x01
 #define INDIO_BUFFER_TRIGGERED		0x02
+#define INDIO_BUFFER_SOFTWARE		0x04
 #define INDIO_BUFFER_HARDWARE		0x08
 
 #define INDIO_ALL_BUFFER_MODES					\
-	(INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE)
+	(INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE | INDIO_BUFFER_SOFTWARE)
 
 #define INDIO_MAX_RAW_ELEMENTS		4
 
@@ -591,7 +597,8 @@ void devm_iio_trigger_free(struct device *dev, struct iio_trigger *iio_trig);
 static inline bool iio_buffer_enabled(struct iio_dev *indio_dev)
 {
 	return indio_dev->currentmode
-		& (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE);
+		& (INDIO_BUFFER_TRIGGERED | INDIO_BUFFER_HARDWARE |
+		   INDIO_BUFFER_SOFTWARE);
 }
 
 /**
diff --git a/include/linux/iio/kfifo_buf.h b/include/linux/iio/kfifo_buf.h
index 25eeac762e84..1683bc710d14 100644
--- a/include/linux/iio/kfifo_buf.h
+++ b/include/linux/iio/kfifo_buf.h
@@ -5,7 +5,10 @@
 #include <linux/iio/iio.h>
 #include <linux/iio/buffer.h>
 
-struct iio_buffer *iio_kfifo_allocate(struct iio_dev *indio_dev);
+struct iio_buffer *iio_kfifo_allocate(void);
 void iio_kfifo_free(struct iio_buffer *r);
 
+struct iio_buffer *devm_iio_kfifo_allocate(struct device *dev);
+void devm_iio_kfifo_free(struct device *dev, struct iio_buffer *r);
+
 #endif
diff --git a/include/linux/iio/types.h b/include/linux/iio/types.h
index 4a2af8adf874..580ed5bdb3fa 100644
--- a/include/linux/iio/types.h
+++ b/include/linux/iio/types.h
@@ -30,6 +30,11 @@ enum iio_chan_type {
 	IIO_CCT,
 	IIO_PRESSURE,
 	IIO_HUMIDITYRELATIVE,
+	IIO_ACTIVITY,
+	IIO_STEPS,
+	IIO_ENERGY,
+	IIO_DISTANCE,
+	IIO_VELOCITY,
 };
 
 enum iio_modifier {
@@ -59,7 +64,12 @@ enum iio_modifier {
 	IIO_MOD_NORTH_MAGN,
 	IIO_MOD_NORTH_TRUE,
 	IIO_MOD_NORTH_MAGN_TILT_COMP,
-	IIO_MOD_NORTH_TRUE_TILT_COMP
+	IIO_MOD_NORTH_TRUE_TILT_COMP,
+	IIO_MOD_RUNNING,
+	IIO_MOD_JOGGING,
+	IIO_MOD_WALKING,
+	IIO_MOD_STILL,
+	IIO_MOD_ROOT_SUM_SQUARED_X_Y_Z,
 };
 
 enum iio_event_type {
@@ -68,6 +78,7 @@ enum iio_event_type {
 	IIO_EV_TYPE_ROC,
 	IIO_EV_TYPE_THRESH_ADAPTIVE,
 	IIO_EV_TYPE_MAG_ADAPTIVE,
+	IIO_EV_TYPE_CHANGE,
 };
 
 enum iio_event_info {
@@ -81,6 +92,7 @@ enum iio_event_direction {
 	IIO_EV_DIR_EITHER,
 	IIO_EV_DIR_RISING,
 	IIO_EV_DIR_FALLING,
+	IIO_EV_DIR_NONE,
 };
 
 #define IIO_VAL_INT 1