ARM: imx: move platform_data definitions

Platform data for device drivers should be defined in
include/linux/platform_data/*.h, not in the architecture
and platform specific directories.

This moves such data out of the imx include directories

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Acked-by: Sascha Hauer <kernel@pengutronix.de>
Acked-by: Vinod Koul <vinod.koul@linux.intel.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Dan Williams <djbw@fb.com>
Cc: "Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
Cc: "Wolfram Sang (embedded platforms)" <w.sang@pengutronix.de>
Cc: Chris Ball <cjb@laptop.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Alan Cox <alan@linux.intel.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Alan Stern <stern@rowland.harvard.edu>
Cc: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
Cc: Liam Girdwood <lrg@ti.com>
Cc: Javier Martin <javier.martin@vista-silicon.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Guennadi Liakhovetski <g.liakhovetski@gmx.de>

17 files changed, 730 insertions, 0 deletions

diff --git a/include/linux/platform_data/asoc-imx-ssi.h b/include/linux/platform_data/asoc-imx-ssi.h
new file mode 100644
index 000000000000..63f3c2804239
--- /dev/null
+++ b/include/linux/platform_data/asoc-imx-ssi.h
@@ -0,0 +1,21 @@
+#ifndef __MACH_SSI_H
+#define __MACH_SSI_H
+
+struct snd_ac97;
+
+extern unsigned char imx_ssi_fiq_start, imx_ssi_fiq_end;
+extern unsigned long imx_ssi_fiq_base, imx_ssi_fiq_tx_buffer, imx_ssi_fiq_rx_buffer;
+
+struct imx_ssi_platform_data {
+	unsigned int flags;
+#define IMX_SSI_DMA            (1 << 0)
+#define IMX_SSI_USE_AC97       (1 << 1)
+#define IMX_SSI_NET            (1 << 2)
+#define IMX_SSI_SYN            (1 << 3)
+#define IMX_SSI_USE_I2S_SLAVE  (1 << 4)
+	void (*ac97_reset) (struct snd_ac97 *ac97);
+	void (*ac97_warm_reset)(struct snd_ac97 *ac97);
+};
+
+#endif /* __MACH_SSI_H */
+
diff --git a/include/linux/platform_data/camera-mx1.h b/include/linux/platform_data/camera-mx1.h
new file mode 100644
index 000000000000..4fd6c70314b4
--- /dev/null
+++ b/include/linux/platform_data/camera-mx1.h
@@ -0,0 +1,35 @@
+/*
+ * mx1_camera.h - i.MX1/i.MXL camera driver header file
+ *
+ * Copyright (c) 2008, Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
+ * Copyright (C) 2009, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * Based on PXA camera.h file:
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Guennadi Liakhovetski <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_CAMERA_H_
+#define __ASM_ARCH_CAMERA_H_
+
+#define MX1_CAMERA_DATA_HIGH	1
+#define MX1_CAMERA_PCLK_RISING	2
+#define MX1_CAMERA_VSYNC_HIGH	4
+
+extern unsigned char mx1_camera_sof_fiq_start, mx1_camera_sof_fiq_end;
+
+/**
+ * struct mx1_camera_pdata - i.MX1/i.MXL camera platform data
+ * @mclk_10khz:	master clock frequency in 10kHz units
+ * @flags:	MX1 camera platform flags
+ */
+struct mx1_camera_pdata {
+	unsigned long mclk_10khz;
+	unsigned long flags;
+};
+
+#endif /* __ASM_ARCH_CAMERA_H_ */
diff --git a/include/linux/platform_data/camera-mx2.h b/include/linux/platform_data/camera-mx2.h
new file mode 100644
index 000000000000..3c080a32dbf5
--- /dev/null
+++ b/include/linux/platform_data/camera-mx2.h
@@ -0,0 +1,46 @@
+/*
+ * mx2-cam.h - i.MX27/i.MX25 camera driver header file
+ *
+ * Copyright (C) 2003, Intel Corporation
+ * Copyright (C) 2008, Sascha Hauer <s.hauer@pengutronix.de>
+ * Copyright (C) 2010, Baruch Siach <baruch@tkos.co.il>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#ifndef __MACH_MX2_CAM_H_
+#define __MACH_MX2_CAM_H_
+
+#define MX2_CAMERA_SWAP16		(1 << 0)
+#define MX2_CAMERA_EXT_VSYNC		(1 << 1)
+#define MX2_CAMERA_CCIR			(1 << 2)
+#define MX2_CAMERA_CCIR_INTERLACE	(1 << 3)
+#define MX2_CAMERA_HSYNC_HIGH		(1 << 4)
+#define MX2_CAMERA_GATED_CLOCK		(1 << 5)
+#define MX2_CAMERA_INV_DATA		(1 << 6)
+#define MX2_CAMERA_PCLK_SAMPLE_RISING	(1 << 7)
+#define MX2_CAMERA_PACK_DIR_MSB		(1 << 8)
+
+/**
+ * struct mx2_camera_platform_data - optional platform data for mx2_camera
+ * @flags: any combination of MX2_CAMERA_*
+ * @clk: clock rate of the csi block / 2
+ */
+struct mx2_camera_platform_data {
+	unsigned long flags;
+	unsigned long clk;
+};
+
+#endif /* __MACH_MX2_CAM_H_ */
diff --git a/include/linux/platform_data/camera-mx3.h b/include/linux/platform_data/camera-mx3.h
new file mode 100644
index 000000000000..f226ee3777e1
--- /dev/null
+++ b/include/linux/platform_data/camera-mx3.h
@@ -0,0 +1,48 @@
+/*
+ * mx3_camera.h - i.MX3x camera driver header file
+ *
+ * Copyright (C) 2008, Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _MX3_CAMERA_H_
+#define _MX3_CAMERA_H_
+
+#include <linux/device.h>
+
+#define MX3_CAMERA_CLK_SRC	1
+#define MX3_CAMERA_EXT_VSYNC	2
+#define MX3_CAMERA_DP		4
+#define MX3_CAMERA_PCP		8
+#define MX3_CAMERA_HSP		0x10
+#define MX3_CAMERA_VSP		0x20
+#define MX3_CAMERA_DATAWIDTH_4	0x40
+#define MX3_CAMERA_DATAWIDTH_8	0x80
+#define MX3_CAMERA_DATAWIDTH_10	0x100
+#define MX3_CAMERA_DATAWIDTH_15	0x200
+
+#define MX3_CAMERA_DATAWIDTH_MASK (MX3_CAMERA_DATAWIDTH_4 | MX3_CAMERA_DATAWIDTH_8 | \
+				   MX3_CAMERA_DATAWIDTH_10 | MX3_CAMERA_DATAWIDTH_15)
+
+/**
+ * struct mx3_camera_pdata - i.MX3x camera platform data
+ * @flags:	MX3_CAMERA_* flags
+ * @mclk_10khz:	master clock frequency in 10kHz units
+ * @dma_dev:	IPU DMA device to match against in channel allocation
+ */
+struct mx3_camera_pdata {
+	unsigned long flags;
+	unsigned long mclk_10khz;
+	struct device *dma_dev;
+};
+
+#endif
diff --git a/include/linux/platform_data/dma-imx-sdma.h b/include/linux/platform_data/dma-imx-sdma.h
new file mode 100644
index 000000000000..3a3942823c20
--- /dev/null
+++ b/include/linux/platform_data/dma-imx-sdma.h
@@ -0,0 +1,59 @@
+#ifndef __MACH_MXC_SDMA_H__
+#define __MACH_MXC_SDMA_H__
+
+/**
+ * struct sdma_script_start_addrs - SDMA script start pointers
+ *
+ * start addresses of the different functions in the physical
+ * address space of the SDMA engine.
+ */
+struct sdma_script_start_addrs {
+	s32 ap_2_ap_addr;
+	s32 ap_2_bp_addr;
+	s32 ap_2_ap_fixed_addr;
+	s32 bp_2_ap_addr;
+	s32 loopback_on_dsp_side_addr;
+	s32 mcu_interrupt_only_addr;
+	s32 firi_2_per_addr;
+	s32 firi_2_mcu_addr;
+	s32 per_2_firi_addr;
+	s32 mcu_2_firi_addr;
+	s32 uart_2_per_addr;
+	s32 uart_2_mcu_addr;
+	s32 per_2_app_addr;
+	s32 mcu_2_app_addr;
+	s32 per_2_per_addr;
+	s32 uartsh_2_per_addr;
+	s32 uartsh_2_mcu_addr;
+	s32 per_2_shp_addr;
+	s32 mcu_2_shp_addr;
+	s32 ata_2_mcu_addr;
+	s32 mcu_2_ata_addr;
+	s32 app_2_per_addr;
+	s32 app_2_mcu_addr;
+	s32 shp_2_per_addr;
+	s32 shp_2_mcu_addr;
+	s32 mshc_2_mcu_addr;
+	s32 mcu_2_mshc_addr;
+	s32 spdif_2_mcu_addr;
+	s32 mcu_2_spdif_addr;
+	s32 asrc_2_mcu_addr;
+	s32 ext_mem_2_ipu_addr;
+	s32 descrambler_addr;
+	s32 dptc_dvfs_addr;
+	s32 utra_addr;
+	s32 ram_code_start_addr;
+};
+
+/**
+ * struct sdma_platform_data - platform specific data for SDMA engine
+ *
+ * @fw_name		The firmware name
+ * @script_addrs	SDMA scripts addresses in SDMA ROM
+ */
+struct sdma_platform_data {
+	char *fw_name;
+	struct sdma_script_start_addrs *script_addrs;
+};
+
+#endif /* __MACH_MXC_SDMA_H__ */
diff --git a/include/linux/platform_data/dma-imx.h b/include/linux/platform_data/dma-imx.h
new file mode 100644
index 000000000000..1b9080385b46
--- /dev/null
+++ b/include/linux/platform_data/dma-imx.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2004-2009 Freescale Semiconductor, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MXC_DMA_H__
+#define __ASM_ARCH_MXC_DMA_H__
+
+#include <linux/scatterlist.h>
+#include <linux/device.h>
+#include <linux/dmaengine.h>
+
+/*
+ * This enumerates peripheral types. Used for SDMA.
+ */
+enum sdma_peripheral_type {
+	IMX_DMATYPE_SSI,	/* MCU domain SSI */
+	IMX_DMATYPE_SSI_SP,	/* Shared SSI */
+	IMX_DMATYPE_MMC,	/* MMC */
+	IMX_DMATYPE_SDHC,	/* SDHC */
+	IMX_DMATYPE_UART,	/* MCU domain UART */
+	IMX_DMATYPE_UART_SP,	/* Shared UART */
+	IMX_DMATYPE_FIRI,	/* FIRI */
+	IMX_DMATYPE_CSPI,	/* MCU domain CSPI */
+	IMX_DMATYPE_CSPI_SP,	/* Shared CSPI */
+	IMX_DMATYPE_SIM,	/* SIM */
+	IMX_DMATYPE_ATA,	/* ATA */
+	IMX_DMATYPE_CCM,	/* CCM */
+	IMX_DMATYPE_EXT,	/* External peripheral */
+	IMX_DMATYPE_MSHC,	/* Memory Stick Host Controller */
+	IMX_DMATYPE_MSHC_SP,	/* Shared Memory Stick Host Controller */
+	IMX_DMATYPE_DSP,	/* DSP */
+	IMX_DMATYPE_MEMORY,	/* Memory */
+	IMX_DMATYPE_FIFO_MEMORY,/* FIFO type Memory */
+	IMX_DMATYPE_SPDIF,	/* SPDIF */
+	IMX_DMATYPE_IPU_MEMORY,	/* IPU Memory */
+	IMX_DMATYPE_ASRC,	/* ASRC */
+	IMX_DMATYPE_ESAI,	/* ESAI */
+};
+
+enum imx_dma_prio {
+	DMA_PRIO_HIGH = 0,
+	DMA_PRIO_MEDIUM = 1,
+	DMA_PRIO_LOW = 2
+};
+
+struct imx_dma_data {
+	int dma_request; /* DMA request line */
+	enum sdma_peripheral_type peripheral_type;
+	int priority;
+};
+
+static inline int imx_dma_is_ipu(struct dma_chan *chan)
+{
+	return !strcmp(dev_name(chan->device->dev), "ipu-core");
+}
+
+static inline int imx_dma_is_general_purpose(struct dma_chan *chan)
+{
+	return strstr(dev_name(chan->device->dev), "sdma") ||
+		!strcmp(dev_name(chan->device->dev), "imx-dma");
+}
+
+#endif
diff --git a/include/linux/platform_data/i2c-imx.h b/include/linux/platform_data/i2c-imx.h
new file mode 100644
index 000000000000..8289d915e615
--- /dev/null
+++ b/include/linux/platform_data/i2c-imx.h
@@ -0,0 +1,21 @@
+/*
+ * i2c.h - i.MX I2C driver header file
+ *
+ * Copyright (c) 2008, Darius Augulis <augulis.darius@gmail.com>
+ *
+ * This file is released under the GPLv2
+ */
+
+#ifndef __ASM_ARCH_I2C_H_
+#define __ASM_ARCH_I2C_H_
+
+/**
+ * struct imxi2c_platform_data - structure of platform data for MXC I2C driver
+ * @bitrate:	Bus speed measured in Hz
+ *
+ **/
+struct imxi2c_platform_data {
+	u32 bitrate;
+};
+
+#endif /* __ASM_ARCH_I2C_H_ */
diff --git a/include/linux/platform_data/mmc-esdhc-imx.h b/include/linux/platform_data/mmc-esdhc-imx.h
new file mode 100644
index 000000000000..aaf97481f413
--- /dev/null
+++ b/include/linux/platform_data/mmc-esdhc-imx.h
@@ -0,0 +1,43 @@
+/*
+ * Copyright 2010 Wolfram Sang <w.sang@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; version 2
+ * of the License.
+ */
+
+#ifndef __ASM_ARCH_IMX_ESDHC_H
+#define __ASM_ARCH_IMX_ESDHC_H
+
+enum wp_types {
+	ESDHC_WP_NONE,		/* no WP, neither controller nor gpio */
+	ESDHC_WP_CONTROLLER,	/* mmc controller internal WP */
+	ESDHC_WP_GPIO,		/* external gpio pin for WP */
+};
+
+enum cd_types {
+	ESDHC_CD_NONE,		/* no CD, neither controller nor gpio */
+	ESDHC_CD_CONTROLLER,	/* mmc controller internal CD */
+	ESDHC_CD_GPIO,		/* external gpio pin for CD */
+	ESDHC_CD_PERMANENT,	/* no CD, card permanently wired to host */
+};
+
+/**
+ * struct esdhc_platform_data - platform data for esdhc on i.MX
+ *
+ * ESDHC_WP(CD)_CONTROLLER type is not available on i.MX25/35.
+ *
+ * @wp_gpio:	gpio for write_protect
+ * @cd_gpio:	gpio for card_detect interrupt
+ * @wp_type:	type of write_protect method (see wp_types enum above)
+ * @cd_type:	type of card_detect method (see cd_types enum above)
+ */
+
+struct esdhc_platform_data {
+	unsigned int wp_gpio;
+	unsigned int cd_gpio;
+	enum wp_types wp_type;
+	enum cd_types cd_type;
+};
+#endif /* __ASM_ARCH_IMX_ESDHC_H */
diff --git a/include/linux/platform_data/mmc-mxcmmc.h b/include/linux/platform_data/mmc-mxcmmc.h
new file mode 100644
index 000000000000..29115f405af9
--- /dev/null
+++ b/include/linux/platform_data/mmc-mxcmmc.h
@@ -0,0 +1,39 @@
+#ifndef ASMARM_ARCH_MMC_H
+#define ASMARM_ARCH_MMC_H
+
+#include <linux/mmc/host.h>
+
+struct device;
+
+/* board specific SDHC data, optional.
+ * If not present, a writable card with 3,3V is assumed.
+ */
+struct imxmmc_platform_data {
+	/* Return values for the get_ro callback should be:
+	 *   0 for a read/write card
+	 *   1 for a read-only card
+	 *   -ENOSYS when not supported (equal to NULL callback)
+	 *   or a negative errno value when something bad happened
+	 */
+	int (*get_ro)(struct device *);
+
+	/* board specific hook to (de)initialize the SD slot.
+	 * The board code can call 'handler' on a card detection
+	 * change giving data as argument.
+	 */
+	int (*init)(struct device *dev, irq_handler_t handler, void *data);
+	void (*exit)(struct device *dev, void *data);
+
+	/* available voltages. If not given, assume
+	 * MMC_VDD_32_33 | MMC_VDD_33_34
+	 */
+	unsigned int ocr_avail;
+
+	/* adjust slot voltage */
+	void (*setpower)(struct device *, unsigned int vdd);
+
+	/* enable card detect using DAT3 */
+	int dat3_card_detect;
+};
+
+#endif
diff --git a/include/linux/platform_data/mtd-mxc_nand.h b/include/linux/platform_data/mtd-mxc_nand.h
new file mode 100644
index 000000000000..6bb96ef1600b
--- /dev/null
+++ b/include/linux/platform_data/mtd-mxc_nand.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved.
+ * Copyright 2008 Sascha Hauer, kernel@pengutronix.de
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+#include <linux/mtd/partitions.h>
+
+struct mxc_nand_platform_data {
+	unsigned int width;	/* data bus width in bytes */
+	unsigned int hw_ecc:1;	/* 0 if suppress hardware ECC */
+	unsigned int flash_bbt:1; /* set to 1 to use a flash based bbt */
+	struct mtd_partition *parts;	/* partition table */
+	int nr_parts;			/* size of parts */
+};
+#endif /* __ASM_ARCH_NAND_H */
diff --git a/include/linux/platform_data/serial-imx.h b/include/linux/platform_data/serial-imx.h
new file mode 100644
index 000000000000..4adec9b154dd
--- /dev/null
+++ b/include/linux/platform_data/serial-imx.h
@@ -0,0 +1,35 @@
+/*
+ * Copyright (C) 2008 by Sascha Hauer <kernel@pengutronix.de>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
+ * MA 02110-1301, USA.
+ */
+
+#ifndef ASMARM_ARCH_UART_H
+#define ASMARM_ARCH_UART_H
+
+#define IMXUART_HAVE_RTSCTS (1<<0)
+#define IMXUART_IRDA        (1<<1)
+
+struct imxuart_platform_data {
+	int (*init)(struct platform_device *pdev);
+	void (*exit)(struct platform_device *pdev);
+	unsigned int flags;
+	void (*irda_enable)(int enable);
+	unsigned int irda_inv_rx:1;
+	unsigned int irda_inv_tx:1;
+	unsigned short transceiver_delay;
+};
+
+#endif
diff --git a/include/linux/platform_data/spi-imx.h b/include/linux/platform_data/spi-imx.h
new file mode 100644
index 000000000000..08be445e8eb8
--- /dev/null
+++ b/include/linux/platform_data/spi-imx.h
@@ -0,0 +1,27 @@
+
+#ifndef __MACH_SPI_H_
+#define __MACH_SPI_H_
+
+/*
+ * struct spi_imx_master - device.platform_data for SPI controller devices.
+ * @chipselect: Array of chipselects for this master. Numbers >= 0 mean gpio
+ *              pins, numbers < 0 mean internal CSPI chipselects according
+ *              to MXC_SPI_CS(). Normally you want to use gpio based chip
+ *              selects as the CSPI module tries to be intelligent about
+ *              when to assert the chipselect: The CSPI module deasserts the
+ *              chipselect once it runs out of input data. The other problem
+ *              is that it is not possible to mix between high active and low
+ *              active chipselects on one single bus using the internal
+ *              chipselects. Unfortunately Freescale decided to put some
+ *              chipselects on dedicated pins which are not usable as gpios,
+ *              so we have to support the internal chipselects.
+ * @num_chipselect: ARRAY_SIZE(chipselect)
+ */
+struct spi_imx_master {
+	int	*chipselect;
+	int	num_chipselect;
+};
+
+#define MXC_SPI_CS(no)	((no) - 32)
+
+#endif /* __MACH_SPI_H_*/
diff --git a/include/linux/platform_data/usb-ehci-mxc.h b/include/linux/platform_data/usb-ehci-mxc.h
new file mode 100644
index 000000000000..7eb9d1329671
--- /dev/null
+++ b/include/linux/platform_data/usb-ehci-mxc.h
@@ -0,0 +1,59 @@
+#ifndef __INCLUDE_ASM_ARCH_MXC_EHCI_H
+#define __INCLUDE_ASM_ARCH_MXC_EHCI_H
+
+/* values for portsc field */
+#define MXC_EHCI_PHY_LOW_POWER_SUSPEND	(1 << 23)
+#define MXC_EHCI_FORCE_FS		(1 << 24)
+#define MXC_EHCI_UTMI_8BIT		(0 << 28)
+#define MXC_EHCI_UTMI_16BIT		(1 << 28)
+#define MXC_EHCI_SERIAL			(1 << 29)
+#define MXC_EHCI_MODE_UTMI		(0 << 30)
+#define MXC_EHCI_MODE_PHILIPS		(1 << 30)
+#define MXC_EHCI_MODE_ULPI		(2 << 30)
+#define MXC_EHCI_MODE_SERIAL		(3 << 30)
+
+/* values for flags field */
+#define MXC_EHCI_INTERFACE_DIFF_UNI	(0 << 0)
+#define MXC_EHCI_INTERFACE_DIFF_BI	(1 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_UNI	(2 << 0)
+#define MXC_EHCI_INTERFACE_SINGLE_BI	(3 << 0)
+#define MXC_EHCI_INTERFACE_MASK		(0xf)
+
+#define MXC_EHCI_POWER_PINS_ENABLED	(1 << 5)
+#define MXC_EHCI_PWR_PIN_ACTIVE_HIGH	(1 << 6)
+#define MXC_EHCI_OC_PIN_ACTIVE_LOW	(1 << 7)
+#define MXC_EHCI_TTL_ENABLED		(1 << 8)
+
+#define MXC_EHCI_INTERNAL_PHY		(1 << 9)
+#define MXC_EHCI_IPPUE_DOWN		(1 << 10)
+#define MXC_EHCI_IPPUE_UP		(1 << 11)
+#define MXC_EHCI_WAKEUP_ENABLED		(1 << 12)
+#define MXC_EHCI_ITC_NO_THRESHOLD	(1 << 13)
+
+#define MXC_USBCTRL_OFFSET		0
+#define MXC_USB_PHY_CTR_FUNC_OFFSET	0x8
+#define MXC_USB_PHY_CTR_FUNC2_OFFSET	0xc
+#define MXC_USBH2CTRL_OFFSET		0x14
+
+#define MX5_USBOTHER_REGS_OFFSET	0x800
+
+/* USB_PHY_CTRL_FUNC2*/
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_MASK		0x3
+#define MX5_USB_UTMI_PHYCTRL1_PLLDIV_SHIFT		0
+
+struct mxc_usbh_platform_data {
+	int (*init)(struct platform_device *pdev);
+	int (*exit)(struct platform_device *pdev);
+
+	unsigned int		 portsc;
+	struct usb_phy		*otg;
+};
+
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
+#endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */
+
diff --git a/include/linux/platform_data/usb-imx_udc.h b/include/linux/platform_data/usb-imx_udc.h
new file mode 100644
index 000000000000..be273371f34a
--- /dev/null
+++ b/include/linux/platform_data/usb-imx_udc.h
@@ -0,0 +1,23 @@
+/*
+ *	Copyright (C) 2008 Darius Augulis <augulis.darius@gmail.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MXC_USB
+#define __ASM_ARCH_MXC_USB
+
+struct imxusb_platform_data {
+	int (*init)(struct device *);
+	void (*exit)(struct device *);
+};
+
+#endif /* __ASM_ARCH_MXC_USB */
diff --git a/include/linux/platform_data/usb-mx2.h b/include/linux/platform_data/usb-mx2.h
new file mode 100644
index 000000000000..22d0b596262c
--- /dev/null
+++ b/include/linux/platform_data/usb-mx2.h
@@ -0,0 +1,38 @@
+/*
+ *	Copyright (C) 2009 Martin Fuzzey <mfuzzey@gmail.com>
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ *	This program is distributed in the hope that it will be useful,
+ *	but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *	MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *	GNU General Public License for more details.
+ */
+
+#ifndef __ASM_ARCH_MX21_USBH
+#define __ASM_ARCH_MX21_USBH
+
+enum mx21_usbh_xcvr {
+	/* Values below as used by hardware (HWMODE register) */
+	MX21_USBXCVR_TXDIF_RXDIF = 0,
+	MX21_USBXCVR_TXDIF_RXSE = 1,
+	MX21_USBXCVR_TXSE_RXDIF = 2,
+	MX21_USBXCVR_TXSE_RXSE = 3,
+};
+
+struct mx21_usbh_platform_data {
+	enum mx21_usbh_xcvr host_xcvr; /* tranceiver mode host 1,2 ports */
+	enum mx21_usbh_xcvr otg_xcvr; /* tranceiver mode otg (as host) port */
+	u16 	enable_host1:1,
+		enable_host2:1,
+		enable_otg_host:1, /* enable "OTG" port (as host) */
+		host1_xcverless:1, /* traceiverless host1 port */
+		host1_txenoe:1, /* output enable host1 transmit enable */
+		otg_ext_xcvr:1, /* external tranceiver for OTG port */
+		unused:10;
+};
+
+#endif /* __ASM_ARCH_MX21_USBH */
diff --git a/include/linux/platform_data/video-imxfb.h b/include/linux/platform_data/video-imxfb.h
new file mode 100644
index 000000000000..9de8f062ad5d
--- /dev/null
+++ b/include/linux/platform_data/video-imxfb.h
@@ -0,0 +1,84 @@
+/*
+ * This structure describes the machine which we are running on.
+ */
+#ifndef __MACH_IMXFB_H__
+#define __MACH_IMXFB_H__
+
+#include <linux/fb.h>
+
+#define PCR_TFT		(1 << 31)
+#define PCR_COLOR	(1 << 30)
+#define PCR_PBSIZ_1	(0 << 28)
+#define PCR_PBSIZ_2	(1 << 28)
+#define PCR_PBSIZ_4	(2 << 28)
+#define PCR_PBSIZ_8	(3 << 28)
+#define PCR_BPIX_1	(0 << 25)
+#define PCR_BPIX_2	(1 << 25)
+#define PCR_BPIX_4	(2 << 25)
+#define PCR_BPIX_8	(3 << 25)
+#define PCR_BPIX_12	(4 << 25)
+#define PCR_BPIX_16	(5 << 25)
+#define PCR_BPIX_18	(6 << 25)
+#define PCR_PIXPOL	(1 << 24)
+#define PCR_FLMPOL	(1 << 23)
+#define PCR_LPPOL	(1 << 22)
+#define PCR_CLKPOL	(1 << 21)
+#define PCR_OEPOL	(1 << 20)
+#define PCR_SCLKIDLE	(1 << 19)
+#define PCR_END_SEL	(1 << 18)
+#define PCR_END_BYTE_SWAP (1 << 17)
+#define PCR_REV_VS	(1 << 16)
+#define PCR_ACD_SEL	(1 << 15)
+#define PCR_ACD(x)	(((x) & 0x7f) << 8)
+#define PCR_SCLK_SEL	(1 << 7)
+#define PCR_SHARP	(1 << 6)
+#define PCR_PCD(x)	((x) & 0x3f)
+
+#define PWMR_CLS(x)	(((x) & 0x1ff) << 16)
+#define PWMR_LDMSK	(1 << 15)
+#define PWMR_SCR1	(1 << 10)
+#define PWMR_SCR0	(1 << 9)
+#define PWMR_CC_EN	(1 << 8)
+#define PWMR_PW(x)	((x) & 0xff)
+
+#define LSCR1_PS_RISE_DELAY(x)    (((x) & 0x7f) << 26)
+#define LSCR1_CLS_RISE_DELAY(x)   (((x) & 0x3f) << 16)
+#define LSCR1_REV_TOGGLE_DELAY(x) (((x) & 0xf) << 8)
+#define LSCR1_GRAY2(x)            (((x) & 0xf) << 4)
+#define LSCR1_GRAY1(x)            (((x) & 0xf))
+
+#define DMACR_BURST	(1 << 31)
+#define DMACR_HM(x)	(((x) & 0xf) << 16)
+#define DMACR_TM(x)	((x) & 0xf)
+
+struct imx_fb_videomode {
+	struct fb_videomode mode;
+	u32 pcr;
+	unsigned char	bpp;
+};
+
+struct imx_fb_platform_data {
+	struct imx_fb_videomode *mode;
+	int		num_modes;
+
+	u_int		cmap_greyscale:1,
+			cmap_inverse:1,
+			cmap_static:1,
+			unused:29;
+
+	u_int		pwmr;
+	u_int		lscr1;
+	u_int		dmacr;
+
+	u_char * fixed_screen_cpu;
+	dma_addr_t fixed_screen_dma;
+
+	int (*init)(struct platform_device *);
+	void (*exit)(struct platform_device *);
+
+	void (*lcd_power)(int);
+	void (*backlight_power)(int);
+};
+
+void set_imx_fb_info(struct imx_fb_platform_data *);
+#endif /* ifndef __MACH_IMXFB_H__ */
diff --git a/include/linux/platform_data/video-mx3fb.h b/include/linux/platform_data/video-mx3fb.h
new file mode 100644
index 000000000000..fdbe60001542
--- /dev/null
+++ b/include/linux/platform_data/video-mx3fb.h
@@ -0,0 +1,53 @@
+/*
+ * Copyright (C) 2008
+ * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_MX3FB_H__
+#define __ASM_ARCH_MX3FB_H__
+
+#include <linux/device.h>
+#include <linux/fb.h>
+
+/* Proprietary FB_SYNC_ flags */
+#define FB_SYNC_OE_ACT_HIGH	0x80000000
+#define FB_SYNC_CLK_INVERT	0x40000000
+#define FB_SYNC_DATA_INVERT	0x20000000
+#define FB_SYNC_CLK_IDLE_EN	0x10000000
+#define FB_SYNC_SHARP_MODE	0x08000000
+#define FB_SYNC_SWAP_RGB	0x04000000
+#define FB_SYNC_CLK_SEL_EN	0x02000000
+
+/*
+ * Specify the way your display is connected. The IPU can arbitrarily
+ * map the internal colors to the external data lines. We only support
+ * the following mappings at the moment.
+ */
+enum disp_data_mapping {
+	/* blue -> d[0..5], green -> d[6..11], red -> d[12..17] */
+	IPU_DISP_DATA_MAPPING_RGB666,
+	/* blue -> d[0..4], green -> d[5..10], red -> d[11..15] */
+	IPU_DISP_DATA_MAPPING_RGB565,
+	/* blue -> d[0..7], green -> d[8..15], red -> d[16..23] */
+	IPU_DISP_DATA_MAPPING_RGB888,
+};
+
+/**
+ * struct mx3fb_platform_data - mx3fb platform data
+ *
+ * @dma_dev:	pointer to the dma-device, used for dma-slave connection
+ * @mode:	pointer to a platform-provided per mxc_register_fb() videomode
+ */
+struct mx3fb_platform_data {
+	struct device			*dma_dev;
+	const char			*name;
+	const struct fb_videomode	*mode;
+	int				num_modes;
+	enum disp_data_mapping		disp_data_fmt;
+};
+
+#endif