Merge tag 'mac80211-next-for-davem-2018-06-29' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211-next

Small merge conflict in net/mac80211/scan.c, I preserved
the kcalloc() conversion. -DaveM

Johannes Berg says:

====================
This round's updates:
 * finally some of the promised HE code, but it turns
   out to be small - but everything kept changing, so
   one part I did in the driver was >30 patches for
   what was ultimately <200 lines of code ... similar
   here for this code.
 * improved scan privacy support - can now specify scan
   flags for randomizing the sequence number as well as
   reducing the probe request element content
 * rfkill cleanups
 * a timekeeping cleanup from Arnd
 * various other cleanups
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

6 files changed, 826 insertions, 26 deletions

diff --git a/include/linux/ieee80211.h b/include/linux/ieee80211.h
index 8fe7e4306816..9c03a7d5e400 100644
--- a/include/linux/ieee80211.h
+++ b/include/linux/ieee80211.h
@@ -1433,11 +1433,13 @@ struct ieee80211_ht_operation {
 #define IEEE80211_DELBA_PARAM_INITIATOR_MASK 0x0800
 
 /*
- * A-PMDU buffer sizes
- * According to IEEE802.11n spec size varies from 8K to 64K (in powers of 2)
+ * A-MPDU buffer sizes
+ * According to HT size varies from 8 to 64 frames
+ * HE adds the ability to have up to 256 frames.
  */
-#define IEEE80211_MIN_AMPDU_BUF 0x8
-#define IEEE80211_MAX_AMPDU_BUF 0x40
+#define IEEE80211_MIN_AMPDU_BUF		0x8
+#define IEEE80211_MAX_AMPDU_BUF_HT	0x40
+#define IEEE80211_MAX_AMPDU_BUF		0x100
 
 
 /* Spatial Multiplexing Power Save Modes (for capability) */
@@ -1539,6 +1541,106 @@ struct ieee80211_vht_operation {
 	__le16 basic_mcs_set;
 } __packed;
 
+/**
+ * struct ieee80211_he_cap_elem - HE capabilities element
+ *
+ * This structure is the "HE capabilities element" fixed fields as
+ * described in P802.11ax_D2.0 section 9.4.2.237.2 and 9.4.2.237.3
+ */
+struct ieee80211_he_cap_elem {
+	u8 mac_cap_info[5];
+	u8 phy_cap_info[9];
+} __packed;
+
+#define IEEE80211_TX_RX_MCS_NSS_DESC_MAX_LEN	5
+
+/**
+ * enum ieee80211_he_mcs_support - HE MCS support definitions
+ * @IEEE80211_HE_MCS_SUPPORT_0_7: MCSes 0-7 are supported for the
+ *	number of streams
+ * @IEEE80211_HE_MCS_SUPPORT_0_9: MCSes 0-9 are supported
+ * @IEEE80211_HE_MCS_SUPPORT_0_11: MCSes 0-11 are supported
+ * @IEEE80211_HE_MCS_NOT_SUPPORTED: This number of streams isn't supported
+ *
+ * These definitions are used in each 2-bit subfield of the rx_mcs_*
+ * and tx_mcs_* fields of &struct ieee80211_he_mcs_nss_supp, which are
+ * both split into 8 subfields by number of streams. These values indicate
+ * which MCSes are supported for the number of streams the value appears
+ * for.
+ */
+enum ieee80211_he_mcs_support {
+	IEEE80211_HE_MCS_SUPPORT_0_7	= 0,
+	IEEE80211_HE_MCS_SUPPORT_0_9	= 1,
+	IEEE80211_HE_MCS_SUPPORT_0_11	= 2,
+	IEEE80211_HE_MCS_NOT_SUPPORTED	= 3,
+};
+
+/**
+ * struct ieee80211_he_mcs_nss_supp - HE Tx/Rx HE MCS NSS Support Field
+ *
+ * This structure holds the data required for the Tx/Rx HE MCS NSS Support Field
+ * described in P802.11ax_D2.0 section 9.4.2.237.4
+ *
+ * @rx_mcs_80: Rx MCS map 2 bits for each stream, total 8 streams, for channel
+ *     widths less than 80MHz.
+ * @tx_mcs_80: Tx MCS map 2 bits for each stream, total 8 streams, for channel
+ *     widths less than 80MHz.
+ * @rx_mcs_160: Rx MCS map 2 bits for each stream, total 8 streams, for channel
+ *     width 160MHz.
+ * @tx_mcs_160: Tx MCS map 2 bits for each stream, total 8 streams, for channel
+ *     width 160MHz.
+ * @rx_mcs_80p80: Rx MCS map 2 bits for each stream, total 8 streams, for
+ *     channel width 80p80MHz.
+ * @tx_mcs_80p80: Tx MCS map 2 bits for each stream, total 8 streams, for
+ *     channel width 80p80MHz.
+ */
+struct ieee80211_he_mcs_nss_supp {
+	__le16 rx_mcs_80;
+	__le16 tx_mcs_80;
+	__le16 rx_mcs_160;
+	__le16 tx_mcs_160;
+	__le16 rx_mcs_80p80;
+	__le16 tx_mcs_80p80;
+} __packed;
+
+/**
+ * struct ieee80211_he_operation - HE capabilities element
+ *
+ * This structure is the "HE operation element" fields as
+ * described in P802.11ax_D2.0 section 9.4.2.238
+ */
+struct ieee80211_he_operation {
+	__le32 he_oper_params;
+	__le16 he_mcs_nss_set;
+	/* Optional 0,1,3 or 4 bytes: depends on @he_oper_params */
+	u8 optional[0];
+} __packed;
+
+/**
+ * struct ieee80211_he_mu_edca_param_ac_rec - MU AC Parameter Record field
+ *
+ * This structure is the "MU AC Parameter Record" fields as
+ * described in P802.11ax_D2.0 section 9.4.2.240
+ */
+struct ieee80211_he_mu_edca_param_ac_rec {
+	u8 aifsn;
+	u8 ecw_min_max;
+	u8 mu_edca_timer;
+} __packed;
+
+/**
+ * struct ieee80211_mu_edca_param_set - MU EDCA Parameter Set element
+ *
+ * This structure is the "MU EDCA Parameter Set element" fields as
+ * described in P802.11ax_D2.0 section 9.4.2.240
+ */
+struct ieee80211_mu_edca_param_set {
+	u8 mu_qos_info;
+	struct ieee80211_he_mu_edca_param_ac_rec ac_be;
+	struct ieee80211_he_mu_edca_param_ac_rec ac_bk;
+	struct ieee80211_he_mu_edca_param_ac_rec ac_vi;
+	struct ieee80211_he_mu_edca_param_ac_rec ac_vo;
+} __packed;
 
 /* 802.11ac VHT Capabilities */
 #define IEEE80211_VHT_CAP_MAX_MPDU_LENGTH_3895			0x00000000
@@ -1577,6 +1679,328 @@ struct ieee80211_vht_operation {
 #define IEEE80211_VHT_CAP_RX_ANTENNA_PATTERN			0x10000000
 #define IEEE80211_VHT_CAP_TX_ANTENNA_PATTERN			0x20000000
 
+/* 802.11ax HE MAC capabilities */
+#define IEEE80211_HE_MAC_CAP0_HTC_HE				0x01
+#define IEEE80211_HE_MAC_CAP0_TWT_REQ				0x02
+#define IEEE80211_HE_MAC_CAP0_TWT_RES				0x04
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_NOT_SUPP		0x00
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_1		0x08
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_2		0x10
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_LEVEL_3		0x18
+#define IEEE80211_HE_MAC_CAP0_DYNAMIC_FRAG_MASK			0x18
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_1		0x00
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_2		0x20
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_4		0x40
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_8		0x60
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_16		0x80
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_32		0xa0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_64		0xc0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_UNLIMITED	0xe0
+#define IEEE80211_HE_MAC_CAP0_MAX_NUM_FRAG_MSDU_MASK		0xe0
+
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_UNLIMITED		0x00
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_128			0x01
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_256			0x02
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_512			0x03
+#define IEEE80211_HE_MAC_CAP1_MIN_FRAG_SIZE_MASK		0x03
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_0US		0x00
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_8US		0x04
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_16US		0x08
+#define IEEE80211_HE_MAC_CAP1_TF_MAC_PAD_DUR_MASK		0x0c
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_1		0x00
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_2		0x10
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_3		0x20
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_4		0x30
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_5		0x40
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_6		0x50
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_7		0x60
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_8		0x70
+#define IEEE80211_HE_MAC_CAP1_MULTI_TID_AGG_QOS_MASK		0x70
+
+/* Link adaptation is split between byte HE_MAC_CAP1 and
+ * HE_MAC_CAP2. It should be set only if IEEE80211_HE_MAC_CAP0_HTC_HE
+ * in which case the following values apply:
+ * 0 = No feedback.
+ * 1 = reserved.
+ * 2 = Unsolicited feedback.
+ * 3 = both
+ */
+#define IEEE80211_HE_MAC_CAP1_LINK_ADAPTATION			0x80
+
+#define IEEE80211_HE_MAC_CAP2_LINK_ADAPTATION			0x01
+#define IEEE80211_HE_MAC_CAP2_ALL_ACK				0x02
+#define IEEE80211_HE_MAC_CAP2_UL_MU_RESP_SCHED			0x04
+#define IEEE80211_HE_MAC_CAP2_BSR				0x08
+#define IEEE80211_HE_MAC_CAP2_BCAST_TWT				0x10
+#define IEEE80211_HE_MAC_CAP2_32BIT_BA_BITMAP			0x20
+#define IEEE80211_HE_MAC_CAP2_MU_CASCADING			0x40
+#define IEEE80211_HE_MAC_CAP2_ACK_EN				0x80
+
+#define IEEE80211_HE_MAC_CAP3_GRP_ADDR_MULTI_STA_BA_DL_MU	0x01
+#define IEEE80211_HE_MAC_CAP3_OMI_CONTROL			0x02
+#define IEEE80211_HE_MAC_CAP3_OFDMA_RA				0x04
+
+/* The maximum length of an A-MDPU is defined by the combination of the Maximum
+ * A-MDPU Length Exponent field in the HT capabilities, VHT capabilities and the
+ * same field in the HE capabilities.
+ */
+#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_USE_VHT	0x00
+#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_VHT_1		0x08
+#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_VHT_2		0x10
+#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_RESERVED	0x18
+#define IEEE80211_HE_MAC_CAP3_MAX_A_AMPDU_LEN_EXP_MASK		0x18
+#define IEEE80211_HE_MAC_CAP3_A_AMSDU_FRAG			0x20
+#define IEEE80211_HE_MAC_CAP3_FLEX_TWT_SCHED			0x40
+#define IEEE80211_HE_MAC_CAP3_RX_CTRL_FRAME_TO_MULTIBSS		0x80
+
+#define IEEE80211_HE_MAC_CAP4_BSRP_BQRP_A_MPDU_AGG		0x01
+#define IEEE80211_HE_MAC_CAP4_QTP				0x02
+#define IEEE80211_HE_MAC_CAP4_BQR				0x04
+#define IEEE80211_HE_MAC_CAP4_SR_RESP				0x08
+#define IEEE80211_HE_MAC_CAP4_NDP_FB_REP			0x10
+#define IEEE80211_HE_MAC_CAP4_OPS				0x20
+#define IEEE80211_HE_MAC_CAP4_AMDSU_IN_AMPDU			0x40
+
+/* 802.11ax HE PHY capabilities */
+#define IEEE80211_HE_PHY_CAP0_DUAL_BAND					0x01
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_IN_2G		0x02
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_40MHZ_80MHZ_IN_5G	0x04
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G		0x08
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G	0x10
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_2G	0x20
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_RU_MAPPING_IN_5G	0x40
+#define IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_MASK			0xfe
+
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_20MHZ	0x01
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_80MHZ_ONLY_SECOND_40MHZ	0x02
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_20MHZ	0x04
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_160MHZ_ONLY_SECOND_40MHZ	0x08
+#define IEEE80211_HE_PHY_CAP1_PREAMBLE_PUNC_RX_MASK			0x0f
+#define IEEE80211_HE_PHY_CAP1_DEVICE_CLASS_A				0x10
+#define IEEE80211_HE_PHY_CAP1_LDPC_CODING_IN_PAYLOAD			0x20
+#define IEEE80211_HE_PHY_CAP1_HE_LTF_AND_GI_FOR_HE_PPDUS_0_8US		0x40
+/* Midamble RX Max NSTS is split between byte #2 and byte #3 */
+#define IEEE80211_HE_PHY_CAP1_MIDAMBLE_RX_MAX_NSTS			0x80
+
+#define IEEE80211_HE_PHY_CAP2_MIDAMBLE_RX_MAX_NSTS			0x01
+#define IEEE80211_HE_PHY_CAP2_NDP_4x_LTF_AND_3_2US			0x02
+#define IEEE80211_HE_PHY_CAP2_STBC_TX_UNDER_80MHZ			0x04
+#define IEEE80211_HE_PHY_CAP2_STBC_RX_UNDER_80MHZ			0x08
+#define IEEE80211_HE_PHY_CAP2_DOPPLER_TX				0x10
+#define IEEE80211_HE_PHY_CAP2_DOPPLER_RX				0x20
+
+/* Note that the meaning of UL MU below is different between an AP and a non-AP
+ * sta, where in the AP case it indicates support for Rx and in the non-AP sta
+ * case it indicates support for Tx.
+ */
+#define IEEE80211_HE_PHY_CAP2_UL_MU_FULL_MU_MIMO			0x40
+#define IEEE80211_HE_PHY_CAP2_UL_MU_PARTIAL_MU_MIMO			0x80
+
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_NO_DCM			0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_BPSK			0x01
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_QPSK			0x02
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_16_QAM			0x03
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_TX_MASK			0x03
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_1				0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_TX_NSS_2				0x04
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_NO_DCM			0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_BPSK			0x08
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_QPSK			0x10
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_16_QAM			0x18
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_CONST_RX_MASK			0x18
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_1				0x00
+#define IEEE80211_HE_PHY_CAP3_DCM_MAX_RX_NSS_2				0x20
+#define IEEE80211_HE_PHY_CAP3_RX_HE_MU_PPDU_FROM_NON_AP_STA		0x40
+#define IEEE80211_HE_PHY_CAP3_SU_BEAMFORMER				0x80
+
+#define IEEE80211_HE_PHY_CAP4_SU_BEAMFORMEE				0x01
+#define IEEE80211_HE_PHY_CAP4_MU_BEAMFORMER				0x02
+
+/* Minimal allowed value of Max STS under 80MHz is 3 */
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_4		0x0c
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_5		0x10
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_6		0x14
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_7		0x18
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_8		0x1c
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_UNDER_80MHZ_MASK	0x1c
+
+/* Minimal allowed value of Max STS above 80MHz is 3 */
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_4		0x60
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_5		0x80
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_6		0xa0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_7		0xc0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_8		0xe0
+#define IEEE80211_HE_PHY_CAP4_BEAMFORMEE_MAX_STS_ABOVE_80MHZ_MASK	0xe0
+
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_1	0x00
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_2	0x01
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_3	0x02
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_4	0x03
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_5	0x04
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_6	0x05
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_7	0x06
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_8	0x07
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_UNDER_80MHZ_MASK	0x07
+
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_1	0x00
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_2	0x08
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_3	0x10
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_4	0x18
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_5	0x20
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_6	0x28
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_7	0x30
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_8	0x38
+#define IEEE80211_HE_PHY_CAP5_BEAMFORMEE_NUM_SND_DIM_ABOVE_80MHZ_MASK	0x38
+
+#define IEEE80211_HE_PHY_CAP5_NG16_SU_FEEDBACK				0x40
+#define IEEE80211_HE_PHY_CAP5_NG16_MU_FEEDBACK				0x80
+
+#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_42_SU			0x01
+#define IEEE80211_HE_PHY_CAP6_CODEBOOK_SIZE_75_MU			0x02
+#define IEEE80211_HE_PHY_CAP6_TRIG_SU_BEAMFORMER_FB			0x04
+#define IEEE80211_HE_PHY_CAP6_TRIG_MU_BEAMFORMER_FB			0x08
+#define IEEE80211_HE_PHY_CAP6_TRIG_CQI_FB				0x10
+#define IEEE80211_HE_PHY_CAP6_PARTIAL_BW_EXT_RANGE			0x20
+#define IEEE80211_HE_PHY_CAP6_PARTIAL_BANDWIDTH_DL_MUMIMO		0x40
+#define IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT			0x80
+
+#define IEEE80211_HE_PHY_CAP7_SRP_BASED_SR				0x01
+#define IEEE80211_HE_PHY_CAP7_POWER_BOOST_FACTOR_AR			0x02
+#define IEEE80211_HE_PHY_CAP7_HE_SU_MU_PPDU_4XLTF_AND_08_US_GI		0x04
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_1					0x08
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_2					0x10
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_3					0x18
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_4					0x20
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_5					0x28
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_6					0x30
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_7					0x38
+#define IEEE80211_HE_PHY_CAP7_MAX_NC_MASK				0x38
+#define IEEE80211_HE_PHY_CAP7_STBC_TX_ABOVE_80MHZ			0x40
+#define IEEE80211_HE_PHY_CAP7_STBC_RX_ABOVE_80MHZ			0x80
+
+#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_PPDU_4XLTF_AND_08_US_GI		0x01
+#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_40MHZ_HE_PPDU_IN_2G		0x02
+#define IEEE80211_HE_PHY_CAP8_20MHZ_IN_160MHZ_HE_PPDU			0x04
+#define IEEE80211_HE_PHY_CAP8_80MHZ_IN_160MHZ_HE_PPDU			0x08
+#define IEEE80211_HE_PHY_CAP8_HE_ER_SU_1XLTF_AND_08_US_GI		0x10
+#define IEEE80211_HE_PHY_CAP8_MIDAMBLE_RX_2X_AND_1XLTF			0x20
+
+/* 802.11ax HE TX/RX MCS NSS Support  */
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_HIGHEST_MCS_POS			(3)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_POS			(6)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_POS			(11)
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_TX_BITMAP_MASK			0x07c0
+#define IEEE80211_TX_RX_MCS_NSS_SUPP_RX_BITMAP_MASK			0xf800
+
+/* TX/RX HE MCS Support field Highest MCS subfield encoding */
+enum ieee80211_he_highest_mcs_supported_subfield_enc {
+	HIGHEST_MCS_SUPPORTED_MCS7 = 0,
+	HIGHEST_MCS_SUPPORTED_MCS8,
+	HIGHEST_MCS_SUPPORTED_MCS9,
+	HIGHEST_MCS_SUPPORTED_MCS10,
+	HIGHEST_MCS_SUPPORTED_MCS11,
+};
+
+/* Calculate 802.11ax HE capabilities IE Tx/Rx HE MCS NSS Support Field size */
+static inline u8
+ieee80211_he_mcs_nss_size(const struct ieee80211_he_cap_elem *he_cap)
+{
+	u8 count = 4;
+
+	if (he_cap->phy_cap_info[0] &
+	    IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_160MHZ_IN_5G)
+		count += 4;
+
+	if (he_cap->phy_cap_info[0] &
+	    IEEE80211_HE_PHY_CAP0_CHANNEL_WIDTH_SET_80PLUS80_MHZ_IN_5G)
+		count += 4;
+
+	return count;
+}
+
+/* 802.11ax HE PPE Thresholds */
+#define IEEE80211_PPE_THRES_NSS_SUPPORT_2NSS			(1)
+#define IEEE80211_PPE_THRES_NSS_POS				(0)
+#define IEEE80211_PPE_THRES_NSS_MASK				(7)
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_2x966_AND_966_RU	\
+	(BIT(5) | BIT(6))
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK		0x78
+#define IEEE80211_PPE_THRES_RU_INDEX_BITMASK_POS		(3)
+#define IEEE80211_PPE_THRES_INFO_PPET_SIZE			(3)
+
+/*
+ * Calculate 802.11ax HE capabilities IE PPE field size
+ * Input: Header byte of ppe_thres (first byte), and HE capa IE's PHY cap u8*
+ */
+static inline u8
+ieee80211_he_ppe_size(u8 ppe_thres_hdr, const u8 *phy_cap_info)
+{
+	u8 n;
+
+	if ((phy_cap_info[6] &
+	     IEEE80211_HE_PHY_CAP6_PPE_THRESHOLD_PRESENT) == 0)
+		return 0;
+
+	n = hweight8(ppe_thres_hdr &
+		     IEEE80211_PPE_THRES_RU_INDEX_BITMASK_MASK);
+	n *= (1 + ((ppe_thres_hdr & IEEE80211_PPE_THRES_NSS_MASK) >>
+		   IEEE80211_PPE_THRES_NSS_POS));
+
+	/*
+	 * Each pair is 6 bits, and we need to add the 7 "header" bits to the
+	 * total size.
+	 */
+	n = (n * IEEE80211_PPE_THRES_INFO_PPET_SIZE * 2) + 7;
+	n = DIV_ROUND_UP(n, 8);
+
+	return n;
+}
+
+/* HE Operation defines */
+#define IEEE80211_HE_OPERATION_BSS_COLOR_MASK			0x0000003f
+#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_MASK		0x000001c0
+#define IEEE80211_HE_OPERATION_DFLT_PE_DURATION_OFFSET		6
+#define IEEE80211_HE_OPERATION_TWT_REQUIRED			0x00000200
+#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_MASK		0x000ffc00
+#define IEEE80211_HE_OPERATION_RTS_THRESHOLD_OFFSET		10
+#define IEEE80211_HE_OPERATION_PARTIAL_BSS_COLOR		0x000100000
+#define IEEE80211_HE_OPERATION_VHT_OPER_INFO			0x000200000
+#define IEEE80211_HE_OPERATION_MULTI_BSSID_AP			0x10000000
+#define IEEE80211_HE_OPERATION_TX_BSSID_INDICATOR		0x20000000
+#define IEEE80211_HE_OPERATION_BSS_COLOR_DISABLED		0x40000000
+
+/*
+ * ieee80211_he_oper_size - calculate 802.11ax HE Operations IE size
+ * @he_oper_ie: byte data of the He Operations IE, stating from the the byte
+ *	after the ext ID byte. It is assumed that he_oper_ie has at least
+ *	sizeof(struct ieee80211_he_operation) bytes, checked already in
+ *	ieee802_11_parse_elems_crc()
+ * @return the actual size of the IE data (not including header), or 0 on error
+ */
+static inline u8
+ieee80211_he_oper_size(const u8 *he_oper_ie)
+{
+	struct ieee80211_he_operation *he_oper = (void *)he_oper_ie;
+	u8 oper_len = sizeof(struct ieee80211_he_operation);
+	u32 he_oper_params;
+
+	/* Make sure the input is not NULL */
+	if (!he_oper_ie)
+		return 0;
+
+	/* Calc required length */
+	he_oper_params = le32_to_cpu(he_oper->he_oper_params);
+	if (he_oper_params & IEEE80211_HE_OPERATION_VHT_OPER_INFO)
+		oper_len += 3;
+	if (he_oper_params & IEEE80211_HE_OPERATION_MULTI_BSSID_AP)
+		oper_len++;
+
+	/* Add the first byte (extension ID) to the total length */
+	oper_len++;
+
+	return oper_len;
+}
+
 /* Authentication algorithms */
 #define WLAN_AUTH_OPEN 0
 #define WLAN_AUTH_SHARED_KEY 1
@@ -1992,6 +2416,11 @@ enum ieee80211_eid_ext {
 	WLAN_EID_EXT_FILS_WRAPPED_DATA = 8,
 	WLAN_EID_EXT_FILS_PUBLIC_KEY = 12,
 	WLAN_EID_EXT_FILS_NONCE = 13,
+	WLAN_EID_EXT_FUTURE_CHAN_GUIDANCE = 14,
+	WLAN_EID_EXT_HE_CAPABILITY = 35,
+	WLAN_EID_EXT_HE_OPERATION = 36,
+	WLAN_EID_EXT_UORA = 37,
+	WLAN_EID_EXT_HE_MU_EDCA = 38,
 };
 
 /* Action category code */
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index e6a0031d1b1f..8ad2487a86d5 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -66,7 +66,7 @@ struct rfkill_ops {
 
 #if defined(CONFIG_RFKILL) || defined(CONFIG_RFKILL_MODULE)
 /**
- * rfkill_alloc - allocate rfkill structure
+ * rfkill_alloc - Allocate rfkill structure
  * @name: name of the struct -- the string is not copied internally
  * @parent: device that has rf switch on it
  * @type: type of the switch (RFKILL_TYPE_*)
@@ -112,7 +112,7 @@ void rfkill_pause_polling(struct rfkill *rfkill);
 /**
  * rfkill_resume_polling(struct rfkill *rfkill)
  *
- * Pause polling -- say transmitter is off for other reasons.
+ * Resume polling
  * NOTE: not necessary for suspend/resume -- in that case the
  * core stops polling anyway
  */
@@ -130,7 +130,7 @@ void rfkill_resume_polling(struct rfkill *rfkill);
 void rfkill_unregister(struct rfkill *rfkill);
 
 /**
- * rfkill_destroy - free rfkill structure
+ * rfkill_destroy - Free rfkill structure
  * @rfkill: rfkill structure to be destroyed
  *
  * Destroys the rfkill structure.
@@ -140,7 +140,7 @@ void rfkill_destroy(struct rfkill *rfkill);
 /**
  * rfkill_set_hw_state - Set the internal rfkill hardware block state
  * @rfkill: pointer to the rfkill class to modify.
- * @state: the current hardware block state to set
+ * @blocked: the current hardware block state to set
  *
  * rfkill drivers that get events when the hard-blocked state changes
  * use this function to notify the rfkill core (and through that also
@@ -161,7 +161,7 @@ bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
 /**
  * rfkill_set_sw_state - Set the internal rfkill software block state
  * @rfkill: pointer to the rfkill class to modify.
- * @state: the current software block state to set
+ * @blocked: the current software block state to set
  *
  * rfkill drivers that get events when the soft-blocked state changes
  * (yes, some platforms directly act on input but allow changing again)
@@ -183,7 +183,7 @@ bool rfkill_set_sw_state(struct rfkill *rfkill, bool blocked);
 /**
  * rfkill_init_sw_state - Initialize persistent software block state
  * @rfkill: pointer to the rfkill class to modify.
- * @state: the current software block state to set
+ * @blocked: the current software block state to set
  *
  * rfkill drivers that preserve their software block state over power off
  * use this function to notify the rfkill core (and through that also
@@ -208,17 +208,17 @@ void rfkill_init_sw_state(struct rfkill *rfkill, bool blocked);
 void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw);
 
 /**
- * rfkill_blocked - query rfkill block
+ * rfkill_blocked - Query rfkill block state
  *
  * @rfkill: rfkill struct to query
  */
 bool rfkill_blocked(struct rfkill *rfkill);
 
 /**
- * rfkill_find_type - Helpper for finding rfkill type by name
+ * rfkill_find_type - Helper for finding rfkill type by name
  * @name: the name of the type
  *
- * Returns enum rfkill_type that conrresponds the name.
+ * Returns enum rfkill_type that corresponds to the name.
  */
 enum rfkill_type rfkill_find_type(const char *name);
 
@@ -296,7 +296,7 @@ static inline enum rfkill_type rfkill_find_type(const char *name)
 const char *rfkill_get_led_trigger_name(struct rfkill *rfkill);
 
 /**
- * rfkill_set_led_trigger_name -- set the LED trigger name
+ * rfkill_set_led_trigger_name - Set the LED trigger name
  * @rfkill: rfkill struct
  * @name: LED trigger name
  *
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 5fbfe61f41c6..9ba1f289c439 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -285,6 +285,41 @@ struct ieee80211_sta_vht_cap {
 	struct ieee80211_vht_mcs_info vht_mcs;
 };
 
+#define IEEE80211_HE_PPE_THRES_MAX_LEN		25
+
+/**
+ * struct ieee80211_sta_he_cap - STA's HE capabilities
+ *
+ * This structure describes most essential parameters needed
+ * to describe 802.11ax HE capabilities for a STA.
+ *
+ * @has_he: true iff HE data is valid.
+ * @he_cap_elem: Fixed portion of the HE capabilities element.
+ * @he_mcs_nss_supp: The supported NSS/MCS combinations.
+ * @ppe_thres: Holds the PPE Thresholds data.
+ */
+struct ieee80211_sta_he_cap {
+	bool has_he;
+	struct ieee80211_he_cap_elem he_cap_elem;
+	struct ieee80211_he_mcs_nss_supp he_mcs_nss_supp;
+	u8 ppe_thres[IEEE80211_HE_PPE_THRES_MAX_LEN];
+};
+
+/**
+ * struct ieee80211_sband_iftype_data
+ *
+ * This structure encapsulates sband data that is relevant for the
+ * interface types defined in @types_mask.  Each type in the
+ * @types_mask must be unique across all instances of iftype_data.
+ *
+ * @types_mask: interface types mask
+ * @he_cap: holds the HE capabilities
+ */
+struct ieee80211_sband_iftype_data {
+	u16 types_mask;
+	struct ieee80211_sta_he_cap he_cap;
+};
+
 /**
  * struct ieee80211_supported_band - frequency band definition
  *
@@ -301,6 +336,11 @@ struct ieee80211_sta_vht_cap {
  * @n_bitrates: Number of bitrates in @bitrates
  * @ht_cap: HT capabilities in this band
  * @vht_cap: VHT capabilities in this band
+ * @n_iftype_data: number of iftype data entries
+ * @iftype_data: interface type data entries.  Note that the bits in
+ *	@types_mask inside this structure cannot overlap (i.e. only
+ *	one occurrence of each type is allowed across all instances of
+ *	iftype_data).
  */
 struct ieee80211_supported_band {
 	struct ieee80211_channel *channels;
@@ -310,9 +350,56 @@ struct ieee80211_supported_band {
 	int n_bitrates;
 	struct ieee80211_sta_ht_cap ht_cap;
 	struct ieee80211_sta_vht_cap vht_cap;
+	u16 n_iftype_data;
+	const struct ieee80211_sband_iftype_data *iftype_data;
 };
 
 /**
+ * ieee80211_get_sband_iftype_data - return sband data for a given iftype
+ * @sband: the sband to search for the STA on
+ * @iftype: enum nl80211_iftype
+ *
+ * Return: pointer to struct ieee80211_sband_iftype_data, or NULL is none found
+ */
+static inline const struct ieee80211_sband_iftype_data *
+ieee80211_get_sband_iftype_data(const struct ieee80211_supported_band *sband,
+				u8 iftype)
+{
+	int i;
+
+	if (WARN_ON(iftype >= NL80211_IFTYPE_MAX))
+		return NULL;
+
+	for (i = 0; i < sband->n_iftype_data; i++)  {
+		const struct ieee80211_sband_iftype_data *data =
+			&sband->iftype_data[i];
+
+		if (data->types_mask & BIT(iftype))
+			return data;
+	}
+
+	return NULL;
+}
+
+/**
+ * ieee80211_get_he_sta_cap - return HE capabilities for an sband's STA
+ * @sband: the sband to search for the STA on
+ *
+ * Return: pointer to the struct ieee80211_sta_he_cap, or NULL is none found
+ */
+static inline const struct ieee80211_sta_he_cap *
+ieee80211_get_he_sta_cap(const struct ieee80211_supported_band *sband)
+{
+	const struct ieee80211_sband_iftype_data *data =
+		ieee80211_get_sband_iftype_data(sband, NL80211_IFTYPE_STATION);
+
+	if (data && data->he_cap.has_he)
+		return &data->he_cap;
+
+	return NULL;
+}
+
+/**
  * wiphy_read_of_freq_limits - read frequency limits from device tree
  *
  * @wiphy: the wireless device to get extra limits for
@@ -899,6 +986,8 @@ enum station_parameters_apply_mask {
  * @opmode_notif: operating mode field from Operating Mode Notification
  * @opmode_notif_used: information if operating mode field is used
  * @support_p2p_ps: information if station supports P2P PS mechanism
+ * @he_capa: HE capabilities of station
+ * @he_capa_len: the length of the HE capabilities
  */
 struct station_parameters {
 	const u8 *supported_rates;
@@ -926,6 +1015,8 @@ struct station_parameters {
 	u8 opmode_notif;
 	bool opmode_notif_used;
 	int support_p2p_ps;
+	const struct ieee80211_he_cap_elem *he_capa;
+	u8 he_capa_len;
 };
 
 /**
@@ -1000,12 +1091,14 @@ int cfg80211_check_station_change(struct wiphy *wiphy,
  * @RATE_INFO_FLAGS_VHT_MCS: mcs field filled with VHT MCS
  * @RATE_INFO_FLAGS_SHORT_GI: 400ns guard interval
  * @RATE_INFO_FLAGS_60G: 60GHz MCS
+ * @RATE_INFO_FLAGS_HE_MCS: HE MCS information
  */
 enum rate_info_flags {
 	RATE_INFO_FLAGS_MCS			= BIT(0),
 	RATE_INFO_FLAGS_VHT_MCS			= BIT(1),
 	RATE_INFO_FLAGS_SHORT_GI		= BIT(2),
 	RATE_INFO_FLAGS_60G			= BIT(3),
+	RATE_INFO_FLAGS_HE_MCS			= BIT(4),
 };
 
 /**
@@ -1019,6 +1112,7 @@ enum rate_info_flags {
  * @RATE_INFO_BW_40: 40 MHz bandwidth
  * @RATE_INFO_BW_80: 80 MHz bandwidth
  * @RATE_INFO_BW_160: 160 MHz bandwidth
+ * @RATE_INFO_BW_HE_RU: bandwidth determined by HE RU allocation
  */
 enum rate_info_bw {
 	RATE_INFO_BW_20 = 0,
@@ -1027,6 +1121,7 @@ enum rate_info_bw {
 	RATE_INFO_BW_40,
 	RATE_INFO_BW_80,
 	RATE_INFO_BW_160,
+	RATE_INFO_BW_HE_RU,
 };
 
 /**
@@ -1035,10 +1130,14 @@ enum rate_info_bw {
  * Information about a receiving or transmitting bitrate
  *
  * @flags: bitflag of flags from &enum rate_info_flags
- * @mcs: mcs index if struct describes a 802.11n bitrate
+ * @mcs: mcs index if struct describes an HT/VHT/HE rate
  * @legacy: bitrate in 100kbit/s for 802.11abg
- * @nss: number of streams (VHT only)
+ * @nss: number of streams (VHT & HE only)
  * @bw: bandwidth (from &enum rate_info_bw)
+ * @he_gi: HE guard interval (from &enum nl80211_he_gi)
+ * @he_dcm: HE DCM value
+ * @he_ru_alloc: HE RU allocation (from &enum nl80211_he_ru_alloc,
+ *	only valid if bw is %RATE_INFO_BW_HE_RU)
  */
 struct rate_info {
 	u8 flags;
@@ -1046,6 +1145,9 @@ struct rate_info {
 	u16 legacy;
 	u8 nss;
 	u8 bw;
+	u8 he_gi;
+	u8 he_dcm;
+	u8 he_ru_alloc;
 };
 
 /**
diff --git a/include/net/ieee80211_radiotap.h b/include/net/ieee80211_radiotap.h
index 960236fb1681..feef706e1158 100644
--- a/include/net/ieee80211_radiotap.h
+++ b/include/net/ieee80211_radiotap.h
@@ -1,5 +1,6 @@
 /*
  * Copyright (c) 2017		Intel Deutschland GmbH
+ * Copyright (c) 2018		Intel Corporation
  *
  * Permission to use, copy, modify, and/or distribute this software for any
  * purpose with or without fee is hereby granted, provided that the above
@@ -72,6 +73,8 @@ enum ieee80211_radiotap_presence {
 	IEEE80211_RADIOTAP_AMPDU_STATUS = 20,
 	IEEE80211_RADIOTAP_VHT = 21,
 	IEEE80211_RADIOTAP_TIMESTAMP = 22,
+	IEEE80211_RADIOTAP_HE = 23,
+	IEEE80211_RADIOTAP_HE_MU = 24,
 
 	/* valid in every it_present bitmap, even vendor namespaces */
 	IEEE80211_RADIOTAP_RADIOTAP_NAMESPACE = 29,
@@ -202,6 +205,126 @@ enum ieee80211_radiotap_timestamp_flags {
 	IEEE80211_RADIOTAP_TIMESTAMP_FLAG_ACCURACY = 0x02,
 };
 
+struct ieee80211_radiotap_he {
+	__le16 data1, data2, data3, data4, data5, data6;
+};
+
+enum ieee80211_radiotap_he_bits {
+	IEEE80211_RADIOTAP_HE_DATA1_FORMAT_MASK		= 3,
+	IEEE80211_RADIOTAP_HE_DATA1_FORMAT_SU		= 0,
+	IEEE80211_RADIOTAP_HE_DATA1_FORMAT_EXT_SU	= 1,
+	IEEE80211_RADIOTAP_HE_DATA1_FORMAT_MU		= 2,
+	IEEE80211_RADIOTAP_HE_DATA1_FORMAT_TRIG		= 3,
+
+	IEEE80211_RADIOTAP_HE_DATA1_BSS_COLOR_KNOWN	= 0x0004,
+	IEEE80211_RADIOTAP_HE_DATA1_BEAM_CHANGE_KNOWN	= 0x0008,
+	IEEE80211_RADIOTAP_HE_DATA1_UL_DL_KNOWN		= 0x0010,
+	IEEE80211_RADIOTAP_HE_DATA1_DATA_MCS_KNOWN	= 0x0020,
+	IEEE80211_RADIOTAP_HE_DATA1_DATA_DCM_KNOWN	= 0x0040,
+	IEEE80211_RADIOTAP_HE_DATA1_CODING_KNOWN	= 0x0080,
+	IEEE80211_RADIOTAP_HE_DATA1_LDPC_XSYMSEG_KNOWN	= 0x0100,
+	IEEE80211_RADIOTAP_HE_DATA1_STBC_KNOWN		= 0x0200,
+	IEEE80211_RADIOTAP_HE_DATA1_SPTL_REUSE_KNOWN	= 0x0400,
+	IEEE80211_RADIOTAP_HE_DATA1_SPTL_REUSE2_KNOWN	= 0x0800,
+	IEEE80211_RADIOTAP_HE_DATA1_SPTL_REUSE3_KNOWN	= 0x1000,
+	IEEE80211_RADIOTAP_HE_DATA1_SPTL_REUSE4_KNOWN	= 0x2000,
+	IEEE80211_RADIOTAP_HE_DATA1_BW_RU_ALLOC_KNOWN	= 0x4000,
+	IEEE80211_RADIOTAP_HE_DATA1_DOPPLER_KNOWN	= 0x8000,
+
+	IEEE80211_RADIOTAP_HE_DATA2_PRISEC_80_KNOWN	= 0x0001,
+	IEEE80211_RADIOTAP_HE_DATA2_GI_KNOWN		= 0x0002,
+	IEEE80211_RADIOTAP_HE_DATA2_NUM_LTF_SYMS_KNOWN	= 0x0004,
+	IEEE80211_RADIOTAP_HE_DATA2_PRE_FEC_PAD_KNOWN	= 0x0008,
+	IEEE80211_RADIOTAP_HE_DATA2_TXBF_KNOWN		= 0x0010,
+	IEEE80211_RADIOTAP_HE_DATA2_PE_DISAMBIG_KNOWN	= 0x0020,
+	IEEE80211_RADIOTAP_HE_DATA2_TXOP_KNOWN		= 0x0040,
+	IEEE80211_RADIOTAP_HE_DATA2_MIDAMBLE_KNOWN	= 0x0080,
+	IEEE80211_RADIOTAP_HE_DATA2_RU_OFFSET		= 0x3f00,
+	IEEE80211_RADIOTAP_HE_DATA2_RU_OFFSET_KNOWN	= 0x4000,
+	IEEE80211_RADIOTAP_HE_DATA2_PRISEC_80_SEC	= 0x8000,
+
+	IEEE80211_RADIOTAP_HE_DATA3_BSS_COLOR		= 0x003f,
+	IEEE80211_RADIOTAP_HE_DATA3_BEAM_CHANGE		= 0x0040,
+	IEEE80211_RADIOTAP_HE_DATA3_UL_DL		= 0x0080,
+	IEEE80211_RADIOTAP_HE_DATA3_DATA_MCS		= 0x0f00,
+	IEEE80211_RADIOTAP_HE_DATA3_DATA_DCM		= 0x1000,
+	IEEE80211_RADIOTAP_HE_DATA3_CODING		= 0x2000,
+	IEEE80211_RADIOTAP_HE_DATA3_LDPC_XSYMSEG	= 0x4000,
+	IEEE80211_RADIOTAP_HE_DATA3_STBC		= 0x8000,
+
+	IEEE80211_RADIOTAP_HE_DATA4_SU_MU_SPTL_REUSE	= 0x000f,
+	IEEE80211_RADIOTAP_HE_DATA4_MU_STA_ID		= 0x7ff0,
+	IEEE80211_RADIOTAP_HE_DATA4_TB_SPTL_REUSE1	= 0x000f,
+	IEEE80211_RADIOTAP_HE_DATA4_TB_SPTL_REUSE2	= 0x00f0,
+	IEEE80211_RADIOTAP_HE_DATA4_TB_SPTL_REUSE3	= 0x0f00,
+	IEEE80211_RADIOTAP_HE_DATA4_TB_SPTL_REUSE4	= 0xf000,
+
+	IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC	= 0x000f,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_20MHZ	= 0,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_40MHZ	= 1,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_80MHZ	= 2,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_160MHZ	= 3,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_26T	= 4,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_52T	= 5,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_106T	= 6,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_242T	= 7,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_484T	= 8,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_996T	= 9,
+		IEEE80211_RADIOTAP_HE_DATA5_DATA_BW_RU_ALLOC_2x996T	= 10,
+
+	IEEE80211_RADIOTAP_HE_DATA5_GI			= 0x0030,
+		IEEE80211_RADIOTAP_HE_DATA5_GI_0_8			= 0,
+		IEEE80211_RADIOTAP_HE_DATA5_GI_1_6			= 1,
+		IEEE80211_RADIOTAP_HE_DATA5_GI_3_2			= 2,
+
+	IEEE80211_RADIOTAP_HE_DATA5_LTF_SIZE		= 0x00c0,
+		IEEE80211_RADIOTAP_HE_DATA5_LTF_SIZE_UNKNOWN		= 0,
+		IEEE80211_RADIOTAP_HE_DATA5_LTF_SIZE_1X			= 1,
+		IEEE80211_RADIOTAP_HE_DATA5_LTF_SIZE_2X			= 2,
+		IEEE80211_RADIOTAP_HE_DATA5_LTF_SIZE_4X			= 3,
+	IEEE80211_RADIOTAP_HE_DATA5_NUM_LTF_SYMS	= 0x0700,
+	IEEE80211_RADIOTAP_HE_DATA5_PRE_FEC_PAD		= 0x3000,
+	IEEE80211_RADIOTAP_HE_DATA5_TXBF		= 0x4000,
+	IEEE80211_RADIOTAP_HE_DATA5_PE_DISAMBIG		= 0x8000,
+
+	IEEE80211_RADIOTAP_HE_DATA6_NSTS		= 0x000f,
+	IEEE80211_RADIOTAP_HE_DATA6_DOPPLER		= 0x0010,
+	IEEE80211_RADIOTAP_HE_DATA6_TXOP		= 0x7f00,
+	IEEE80211_RADIOTAP_HE_DATA6_MIDAMBLE_PDCTY	= 0x8000,
+};
+
+struct ieee80211_radiotap_he_mu {
+	__le16 flags1, flags2;
+	u8 ru_ch1[4];
+	u8 ru_ch2[4];
+};
+
+enum ieee80211_radiotap_he_mu_bits {
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_SIG_B_MCS		= 0x000f,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_SIG_B_MCS_KNOWN		= 0x0010,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_SIG_B_DCM		= 0x0020,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_SIG_B_DCM_KNOWN		= 0x0040,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_CH2_CTR_26T_RU_KNOWN	= 0x0080,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_CH1_RU_KNOWN		= 0x0100,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_CH2_RU_KNOWN		= 0x0200,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_CH1_CTR_26T_RU_KNOWN	= 0x1000,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_CH1_CTR_26T_RU		= 0x2000,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_SIG_B_COMP_KNOWN	= 0x4000,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS1_SIG_B_SYMS_USERS_KNOWN	= 0x8000,
+
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_BW_FROM_SIG_A_BW	= 0x0003,
+		IEEE80211_RADIOTAP_HE_MU_FLAGS2_BW_FROM_SIG_A_BW_20MHZ	= 0x0000,
+		IEEE80211_RADIOTAP_HE_MU_FLAGS2_BW_FROM_SIG_A_BW_40MHZ	= 0x0001,
+		IEEE80211_RADIOTAP_HE_MU_FLAGS2_BW_FROM_SIG_A_BW_80MHZ	= 0x0002,
+		IEEE80211_RADIOTAP_HE_MU_FLAGS2_BW_FROM_SIG_A_BW_160MHZ	= 0x0003,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_BW_FROM_SIG_A_BW_KNOWN	= 0x0004,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_SIG_B_COMP		= 0x0008,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_SIG_B_SYMS_USERS	= 0x00f0,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_PUNC_FROM_SIG_A_BW	= 0x0300,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_PUNC_FROM_SIG_A_BW_KNOWN= 0x0400,
+	IEEE80211_RADIOTAP_HE_MU_FLAGS2_CH2_CTR_26T_RU		= 0x0800,
+};
+
 /**
  * ieee80211_get_radiotap_len - get radiotap header length
  */
diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 851a5e19ae32..5790f55c241d 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -23,6 +23,7 @@
 #include <linux/ieee80211.h>
 #include <net/cfg80211.h>
 #include <net/codel.h>
+#include <net/ieee80211_radiotap.h>
 #include <asm/unaligned.h>
 
 /**
@@ -162,6 +163,8 @@ enum ieee80211_ac_numbers {
  * @txop: maximum burst time in units of 32 usecs, 0 meaning disabled
  * @acm: is mandatory admission control required for the access category
  * @uapsd: is U-APSD mode enabled for the queue
+ * @mu_edca: is the MU EDCA configured
+ * @mu_edca_param_rec: MU EDCA Parameter Record for HE
  */
 struct ieee80211_tx_queue_params {
 	u16 txop;
@@ -170,6 +173,8 @@ struct ieee80211_tx_queue_params {
 	u8 aifs;
 	bool acm;
 	bool uapsd;
+	bool mu_edca;
+	struct ieee80211_he_mu_edca_param_ac_rec mu_edca_param_rec;
 };
 
 struct ieee80211_low_level_stats {
@@ -463,6 +468,15 @@ struct ieee80211_mu_group_data {
  * This structure keeps information about a BSS (and an association
  * to that BSS) that can change during the lifetime of the BSS.
  *
+ * @bss_color: 6-bit value to mark inter-BSS frame, if BSS supports HE
+ * @htc_trig_based_pkt_ext: default PE in 4us units, if BSS supports HE
+ * @multi_sta_back_32bit: supports BA bitmap of 32-bits in Multi-STA BACK
+ * @uora_exists: is the UORA element advertised by AP
+ * @ack_enabled: indicates support to receive a multi-TID that solicits either
+ *	ACK, BACK or both
+ * @uora_ocw_range: UORA element's OCW Range field
+ * @frame_time_rts_th: HE duration RTS threshold, in units of 32us
+ * @he_support: does this BSS support HE
  * @assoc: association status
  * @ibss_joined: indicates whether this station is part of an IBSS
  *	or not
@@ -550,6 +564,14 @@ struct ieee80211_mu_group_data {
  */
 struct ieee80211_bss_conf {
 	const u8 *bssid;
+	u8 bss_color;
+	u8 htc_trig_based_pkt_ext;
+	bool multi_sta_back_32bit;
+	bool uora_exists;
+	bool ack_enabled;
+	u8 uora_ocw_range;
+	u16 frame_time_rts_th;
+	bool he_support;
 	/* association related data */
 	bool assoc, ibss_joined;
 	bool ibss_creator;
@@ -1106,6 +1128,18 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_AMPDU_EOF_BIT: Value of the EOF bit in the A-MPDU delimiter for this
  *	frame
  * @RX_FLAG_AMPDU_EOF_BIT_KNOWN: The EOF value is known
+ * @RX_FLAG_RADIOTAP_HE: HE radiotap data is present
+ *	(&struct ieee80211_radiotap_he, mac80211 will fill in
+ *	 - DATA3_DATA_MCS
+ *	 - DATA3_DATA_DCM
+ *	 - DATA3_CODING
+ *	 - DATA5_GI
+ *	 - DATA5_DATA_BW_RU_ALLOC
+ *	 - DATA6_NSTS
+ *	 - DATA3_STBC
+ *	from the RX info data, so leave those zeroed when building this data)
+ * @RX_FLAG_RADIOTAP_HE_MU: HE MU radiotap data is present
+ *	(&struct ieee80211_radiotap_he_mu)
  */
 enum mac80211_rx_flags {
 	RX_FLAG_MMIC_ERROR		= BIT(0),
@@ -1134,6 +1168,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_ICV_STRIPPED		= BIT(23),
 	RX_FLAG_AMPDU_EOF_BIT		= BIT(24),
 	RX_FLAG_AMPDU_EOF_BIT_KNOWN	= BIT(25),
+	RX_FLAG_RADIOTAP_HE		= BIT(26),
+	RX_FLAG_RADIOTAP_HE_MU		= BIT(27),
 };
 
 /**
@@ -1164,6 +1200,7 @@ enum mac80211_rx_encoding {
 	RX_ENC_LEGACY = 0,
 	RX_ENC_HT,
 	RX_ENC_VHT,
+	RX_ENC_HE,
 };
 
 /**
@@ -1198,6 +1235,9 @@ enum mac80211_rx_encoding {
  * @encoding: &enum mac80211_rx_encoding
  * @bw: &enum rate_info_bw
  * @enc_flags: uses bits from &enum mac80211_rx_encoding_flags
+ * @he_ru: HE RU, from &enum nl80211_he_ru_alloc
+ * @he_gi: HE GI, from &enum nl80211_he_gi
+ * @he_dcm: HE DCM value
  * @rx_flags: internal RX flags for mac80211
  * @ampdu_reference: A-MPDU reference number, must be a different value for
  *	each A-MPDU but the same for each subframe within one A-MPDU
@@ -1211,7 +1251,8 @@ struct ieee80211_rx_status {
 	u32 flag;
 	u16 freq;
 	u8 enc_flags;
-	u8 encoding:2, bw:3;
+	u8 encoding:2, bw:3, he_ru:3;
+	u8 he_gi:2, he_dcm:1;
 	u8 rate_idx;
 	u8 nss;
 	u8 rx_flags;
@@ -1770,6 +1811,7 @@ struct ieee80211_sta_rates {
  * @supp_rates: Bitmap of supported rates (per band)
  * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
  * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
+ * @he_cap: HE capabilities of this STA
  * @max_rx_aggregation_subframes: maximal amount of frames in a single AMPDU
  *	that this station is allowed to transmit to us.
  *	Can be modified by driver.
@@ -1805,7 +1847,8 @@ struct ieee80211_sta {
 	u16 aid;
 	struct ieee80211_sta_ht_cap ht_cap;
 	struct ieee80211_sta_vht_cap vht_cap;
-	u8 max_rx_aggregation_subframes;
+	struct ieee80211_sta_he_cap he_cap;
+	u16 max_rx_aggregation_subframes;
 	bool wme;
 	u8 uapsd_queues;
 	u8 max_sp;
@@ -2196,10 +2239,11 @@ enum ieee80211_hw_flags {
  *	it shouldn't be set.
  *
  * @max_tx_aggregation_subframes: maximum number of subframes in an
- *	aggregate an HT driver will transmit. Though ADDBA will advertise
- *	a constant value of 64 as some older APs can crash if the window
- *	size is smaller (an example is LinkSys WRT120N with FW v1.0.07
- *	build 002 Jun 18 2012).
+ *	aggregate an HT/HE device will transmit. In HT AddBA we'll
+ *	advertise a constant value of 64 as some older APs crash if
+ *	the window size is smaller (an example is LinkSys WRT120N
+ *	with FW v1.0.07 build 002 Jun 18 2012).
+ *	For AddBA to HE capable peers this value will be used.
  *
  * @max_tx_fragments: maximum number of tx buffers per (A)-MSDU, sum
  *	of 1 + skb_shinfo(skb)->nr_frags for each skb in the frag_list.
@@ -2216,6 +2260,8 @@ enum ieee80211_hw_flags {
  *	the default is _GI | _BANDWIDTH.
  *	Use the %IEEE80211_RADIOTAP_VHT_KNOWN_\* values.
  *
+ * @radiotap_he: HE radiotap validity flags
+ *
  * @radiotap_timestamp: Information for the radiotap timestamp field; if the
  *	'units_pos' member is set to a non-negative value it must be set to
  *	a combination of a IEEE80211_RADIOTAP_TIMESTAMP_UNIT_* and a
@@ -2263,8 +2309,8 @@ struct ieee80211_hw {
 	u8 max_rates;
 	u8 max_report_rates;
 	u8 max_rate_tries;
-	u8 max_rx_aggregation_subframes;
-	u8 max_tx_aggregation_subframes;
+	u16 max_rx_aggregation_subframes;
+	u16 max_tx_aggregation_subframes;
 	u8 max_tx_fragments;
 	u8 offchannel_tx_hw_queue;
 	u8 radiotap_mcs_details;
@@ -2904,7 +2950,7 @@ struct ieee80211_ampdu_params {
 	struct ieee80211_sta *sta;
 	u16 tid;
 	u16 ssn;
-	u8 buf_size;
+	u16 buf_size;
 	bool amsdu;
 	u16 timeout;
 };
diff --git a/include/uapi/linux/nl80211.h b/include/uapi/linux/nl80211.h
index 27e4e441caac..7acc16f34942 100644
--- a/include/uapi/linux/nl80211.h
+++ b/include/uapi/linux/nl80211.h
@@ -2237,6 +2237,9 @@ enum nl80211_commands {
  *      enforced.
  * @NL80211_ATTR_TXQ_QUANTUM: TXQ scheduler quantum (bytes). Number of bytes
  *      a flow is assigned on each round of the DRR scheduler.
+ * @NL80211_ATTR_HE_CAPABILITY: HE Capability information element (from
+ *	association request when used with NL80211_CMD_NEW_STATION). Can be set
+ *	only if %NL80211_STA_FLAG_WME is set.
  *
  * @NUM_NL80211_ATTR: total number of nl80211_attrs available
  * @NL80211_ATTR_MAX: highest attribute number currently defined
@@ -2677,6 +2680,8 @@ enum nl80211_attrs {
 	NL80211_ATTR_TXQ_MEMORY_LIMIT,
 	NL80211_ATTR_TXQ_QUANTUM,
 
+	NL80211_ATTR_HE_CAPABILITY,
+
 	/* add attributes here, update the policy in nl80211.c */
 
 	__NL80211_ATTR_AFTER_LAST,
@@ -2726,7 +2731,8 @@ enum nl80211_attrs {
 #define NL80211_TKIP_DATA_OFFSET_RX_MIC_KEY	24
 #define NL80211_HT_CAPABILITY_LEN		26
 #define NL80211_VHT_CAPABILITY_LEN		12
-
+#define NL80211_HE_MIN_CAPABILITY_LEN           16
+#define NL80211_HE_MAX_CAPABILITY_LEN           51
 #define NL80211_MAX_NR_CIPHER_SUITES		5
 #define NL80211_MAX_NR_AKM_SUITES		2
 
@@ -2854,6 +2860,38 @@ struct nl80211_sta_flag_update {
 } __attribute__((packed));
 
 /**
+ * enum nl80211_he_gi - HE guard interval
+ * @NL80211_RATE_INFO_HE_GI_0_8: 0.8 usec
+ * @NL80211_RATE_INFO_HE_GI_1_6: 1.6 usec
+ * @NL80211_RATE_INFO_HE_GI_3_2: 3.2 usec
+ */
+enum nl80211_he_gi {
+	NL80211_RATE_INFO_HE_GI_0_8,
+	NL80211_RATE_INFO_HE_GI_1_6,
+	NL80211_RATE_INFO_HE_GI_3_2,
+};
+
+/**
+ * enum nl80211_he_ru_alloc - HE RU allocation values
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_26: 26-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_52: 52-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_106: 106-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_242: 242-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_484: 484-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_996: 996-tone RU allocation
+ * @NL80211_RATE_INFO_HE_RU_ALLOC_2x996: 2x996-tone RU allocation
+ */
+enum nl80211_he_ru_alloc {
+	NL80211_RATE_INFO_HE_RU_ALLOC_26,
+	NL80211_RATE_INFO_HE_RU_ALLOC_52,
+	NL80211_RATE_INFO_HE_RU_ALLOC_106,
+	NL80211_RATE_INFO_HE_RU_ALLOC_242,
+	NL80211_RATE_INFO_HE_RU_ALLOC_484,
+	NL80211_RATE_INFO_HE_RU_ALLOC_996,
+	NL80211_RATE_INFO_HE_RU_ALLOC_2x996,
+};
+
+/**
  * enum nl80211_rate_info - bitrate information
  *
  * These attribute types are used with %NL80211_STA_INFO_TXRATE
@@ -2885,6 +2923,13 @@ struct nl80211_sta_flag_update {
  * @NL80211_RATE_INFO_5_MHZ_WIDTH: 5 MHz width - note that this is
  *	a legacy rate and will be reported as the actual bitrate, i.e.
  *	a quarter of the base (20 MHz) rate
+ * @NL80211_RATE_INFO_HE_MCS: HE MCS index (u8, 0-11)
+ * @NL80211_RATE_INFO_HE_NSS: HE NSS value (u8, 1-8)
+ * @NL80211_RATE_INFO_HE_GI: HE guard interval identifier
+ *	(u8, see &enum nl80211_he_gi)
+ * @NL80211_RATE_INFO_HE_DCM: HE DCM value (u8, 0/1)
+ * @NL80211_RATE_INFO_RU_ALLOC: HE RU allocation, if not present then
+ *	non-OFDMA was used (u8, see &enum nl80211_he_ru_alloc)
  * @__NL80211_RATE_INFO_AFTER_LAST: internal use
  */
 enum nl80211_rate_info {
@@ -2901,6 +2946,11 @@ enum nl80211_rate_info {
 	NL80211_RATE_INFO_160_MHZ_WIDTH,
 	NL80211_RATE_INFO_10_MHZ_WIDTH,
 	NL80211_RATE_INFO_5_MHZ_WIDTH,
+	NL80211_RATE_INFO_HE_MCS,
+	NL80211_RATE_INFO_HE_NSS,
+	NL80211_RATE_INFO_HE_GI,
+	NL80211_RATE_INFO_HE_DCM,
+	NL80211_RATE_INFO_HE_RU_ALLOC,
 
 	/* keep last */
 	__NL80211_RATE_INFO_AFTER_LAST,
@@ -3167,6 +3217,38 @@ enum nl80211_mpath_info {
 };
 
 /**
+ * enum nl80211_band_iftype_attr - Interface type data attributes
+ *
+ * @__NL80211_BAND_IFTYPE_ATTR_INVALID: attribute number 0 is reserved
+ * @NL80211_BAND_IFTYPE_ATTR_IFTYPES: nested attribute containing a flag attribute
+ *     for each interface type that supports the band data
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC: HE MAC capabilities as in HE
+ *     capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY: HE PHY capabilities as in HE
+ *     capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET: HE supported NSS/MCS as in HE
+ *     capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE: HE PPE thresholds information as
+ *     defined in HE capabilities IE
+ * @NL80211_BAND_IFTYPE_ATTR_MAX: highest band HE capability attribute currently
+ *     defined
+ * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use
+ */
+enum nl80211_band_iftype_attr {
+	__NL80211_BAND_IFTYPE_ATTR_INVALID,
+
+	NL80211_BAND_IFTYPE_ATTR_IFTYPES,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MAC,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PHY,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET,
+	NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE,
+
+	/* keep last */
+	__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST,
+	NL80211_BAND_IFTYPE_ATTR_MAX = __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST - 1
+};
+
+/**
  * enum nl80211_band_attr - band attributes
  * @__NL80211_BAND_ATTR_INVALID: attribute number 0 is reserved
  * @NL80211_BAND_ATTR_FREQS: supported frequencies in this band,
@@ -3181,6 +3263,8 @@ enum nl80211_mpath_info {
  * @NL80211_BAND_ATTR_VHT_MCS_SET: 32-byte attribute containing the MCS set as
  *	defined in 802.11ac
  * @NL80211_BAND_ATTR_VHT_CAPA: VHT capabilities, as in the HT information IE
+ * @NL80211_BAND_ATTR_IFTYPE_DATA: nested array attribute, with each entry using
+ *	attributes from &enum nl80211_band_iftype_attr
  * @NL80211_BAND_ATTR_MAX: highest band attribute currently defined
  * @__NL80211_BAND_ATTR_AFTER_LAST: internal use
  */
@@ -3196,6 +3280,7 @@ enum nl80211_band_attr {
 
 	NL80211_BAND_ATTR_VHT_MCS_SET,
 	NL80211_BAND_ATTR_VHT_CAPA,
+	NL80211_BAND_ATTR_IFTYPE_DATA,
 
 	/* keep last */
 	__NL80211_BAND_ATTR_AFTER_LAST,
@@ -5133,6 +5218,11 @@ enum nl80211_feature_flags {
  *	support to nl80211.
  * @NL80211_EXT_FEATURE_TXQS: Driver supports FQ-CoDel-enabled intermediate
  *      TXQs.
+ * @NL80211_EXT_FEATURE_SCAN_RANDOM_SN: Driver/device supports randomizing the
+ *	SN in probe request frames if requested by %NL80211_SCAN_FLAG_RANDOM_SN.
+ * @NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT: Driver/device can omit all data
+ *	except for supported rates from the probe request content if requested
+ *	by the %NL80211_SCAN_FLAG_MIN_PREQ_CONTENT flag.
  *
  * @NUM_NL80211_EXT_FEATURES: number of extended features.
  * @MAX_NL80211_EXT_FEATURES: highest extended feature index.
@@ -5167,6 +5257,8 @@ enum nl80211_ext_feature_index {
 	NL80211_EXT_FEATURE_CONTROL_PORT_OVER_NL80211,
 	NL80211_EXT_FEATURE_DATA_ACK_SIGNAL_SUPPORT,
 	NL80211_EXT_FEATURE_TXQS,
+	NL80211_EXT_FEATURE_SCAN_RANDOM_SN,
+	NL80211_EXT_FEATURE_SCAN_MIN_PREQ_CONTENT,
 
 	/* add new features before the definition below */
 	NUM_NL80211_EXT_FEATURES,
@@ -5272,6 +5364,12 @@ enum nl80211_timeout_reason {
  *	possible scan results. This flag hints the driver to use the best
  *	possible scan configuration to improve the accuracy in scanning.
  *	Latency and power use may get impacted with this flag.
+ * @NL80211_SCAN_FLAG_RANDOM_SN: randomize the sequence number in probe
+ *	request frames from this scan to avoid correlation/tracking being
+ *	possible.
+ * @NL80211_SCAN_FLAG_MIN_PREQ_CONTENT: minimize probe request content to
+ *	only have supported rates and no additional capabilities (unless
+ *	added by userspace explicitly.)
  */
 enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_PRIORITY				= 1<<0,
@@ -5285,6 +5383,8 @@ enum nl80211_scan_flags {
 	NL80211_SCAN_FLAG_LOW_SPAN				= 1<<8,
 	NL80211_SCAN_FLAG_LOW_POWER				= 1<<9,
 	NL80211_SCAN_FLAG_HIGH_ACCURACY				= 1<<10,
+	NL80211_SCAN_FLAG_RANDOM_SN				= 1<<11,
+	NL80211_SCAN_FLAG_MIN_PREQ_CONTENT			= 1<<12,
 };
 
 /**