Merge tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio

Pull GPIO updates from Linus Walleij:
 "This is the bulk of GPIO changes for the v5.5 kernel cycle

  Core changes:

   - Expose pull up/down flags for the GPIO character device to
     userspace.

     After clear input from the RaspberryPi and Beagle communities, it
     has been established that prototyping, industrial automation and
     make communities strongly need this feature, and as we want people
     to use the character device, we have implemented the simple pull
     up/down interface for GPIO lines.

     This means we can specify that a (chip-specific) pull up/down
     resistor can be enabled, but does not offer fine-grained control
     such as cases where the resistance of the same pull resistor can be
     controlled (yet).

   - Introduce devm_fwnode_gpiod_get_index() and start to phase out the
     old symbol devm_fwnode_get_index_gpiod_from_child().

   - A bit of documentation clean-up work.

   - Introduce a define for GPIO line directions and deploy it in all
     GPIO drivers in the drivers/gpio directory.

   - Add a special callback to populate pin ranges when cooperating with
     the pin control subsystem and registering ranges as part of adding
     a gpiolib driver and a gpio_irq_chip driver at the same time. This
     is also deployed in the Intel Merrifield driver.

  New drivers:

   - RDA Micro GPIO controller.

   - XGS-iproc GPIO driver.

  Driver improvements:

   - Wake event and debounce support on the Tegra 186 driver.

   - Finalize the Aspeed SGPIO driver.

   - MPC8xxx uses a normal IRQ handler rather than a chained handler"

* tag 'gpio-v5.5-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (64 commits)
  gpio: Add TODO item for regmap helper
  Documentation: gpio: driver.rst: Fix warnings
  gpio: of: Fix bogus reference to gpiod_get_count()
  gpiolib: Grammar s/manager/managed/
  gpio: lynxpoint: Setup correct IRQ handlers
  MAINTAINERS: Replace my email by one @kernel.org
  gpiolib: acpi: Make acpi_gpiochip_alloc_event always return AE_OK
  gpio/mpc8xxx: fix qoriq GPIO reading
  gpio: mpc8xxx: Don't overwrite default irq_set_type callback
  gpiolib: acpi: Print pin number on acpi_gpiochip_alloc_event errors
  gpiolib: fix coding style in gpiod_hog()
  drm/bridge: ti-tfp410: switch to using fwnode_gpiod_get_index()
  gpio: merrifield: Pass irqchip when adding gpiochip
  gpio: merrifield: Add GPIO <-> pin mapping ranges via callback
  gpiolib: Introduce ->add_pin_ranges() callback
  gpio: mmio: remove untrue leftover comment
  gpio: em: Use platform_get_irq() to obtain interrupts
  gpio: tegra186: Add debounce support
  gpio: tegra186: Program interrupt route mapping
  gpio: tegra186: Derive register offsets from bank/port
  ...

2 files changed, 32 insertions, 0 deletions

diff --git a/include/linux/gpio/driver.h b/include/linux/gpio/driver.h
index 5dd9c982e2cb..e2480ef94c55 100644
--- a/include/linux/gpio/driver.h
+++ b/include/linux/gpio/driver.h
@@ -22,6 +22,9 @@ enum gpio_lookup_flags;
 
 struct gpio_chip;
 
+#define GPIO_LINE_DIRECTION_IN	1
+#define GPIO_LINE_DIRECTION_OUT	0
+
 /**
  * struct gpio_irq_chip - GPIO interrupt controller
  */
@@ -286,6 +289,9 @@ struct gpio_irq_chip {
  *	state (such as pullup/pulldown configuration).
  * @init_valid_mask: optional routine to initialize @valid_mask, to be used if
  *	not all GPIOs are valid.
+ * @add_pin_ranges: optional routine to initialize pin ranges, to be used when
+ *	requires special mapping of the pins that provides GPIO functionality.
+ *	It is called after adding GPIO chip and before adding IRQ chip.
  * @base: identifies the first GPIO number handled by this chip;
  *	or, if negative during registration, requests dynamic ID allocation.
  *	DEPRECATION: providing anything non-negative and nailing the base
@@ -376,6 +382,8 @@ struct gpio_chip {
 						   unsigned long *valid_mask,
 						   unsigned int ngpios);
 
+	int			(*add_pin_ranges)(struct gpio_chip *chip);
+
 	int			base;
 	u16			ngpio;
 	const char		*const *names;
diff --git a/include/uapi/linux/gpio.h b/include/uapi/linux/gpio.h
index 4ebfe0ac6c5b..799cf823d493 100644
--- a/include/uapi/linux/gpio.h
+++ b/include/uapi/linux/gpio.h
@@ -33,6 +33,9 @@ struct gpiochip_info {
 #define GPIOLINE_FLAG_ACTIVE_LOW	(1UL << 2)
 #define GPIOLINE_FLAG_OPEN_DRAIN	(1UL << 3)
 #define GPIOLINE_FLAG_OPEN_SOURCE	(1UL << 4)
+#define GPIOLINE_FLAG_BIAS_PULL_UP	(1UL << 5)
+#define GPIOLINE_FLAG_BIAS_PULL_DOWN	(1UL << 6)
+#define GPIOLINE_FLAG_BIAS_DISABLE	(1UL << 7)
 
 /**
  * struct gpioline_info - Information about a certain GPIO line
@@ -62,6 +65,9 @@ struct gpioline_info {
 #define GPIOHANDLE_REQUEST_ACTIVE_LOW	(1UL << 2)
 #define GPIOHANDLE_REQUEST_OPEN_DRAIN	(1UL << 3)
 #define GPIOHANDLE_REQUEST_OPEN_SOURCE	(1UL << 4)
+#define GPIOHANDLE_REQUEST_BIAS_PULL_UP	(1UL << 5)
+#define GPIOHANDLE_REQUEST_BIAS_PULL_DOWN	(1UL << 6)
+#define GPIOHANDLE_REQUEST_BIAS_DISABLE	(1UL << 7)
 
 /**
  * struct gpiohandle_request - Information about a GPIO handle request
@@ -95,6 +101,24 @@ struct gpiohandle_request {
 };
 
 /**
+ * struct gpiohandle_config - Configuration for a GPIO handle request
+ * @flags: updated flags for the requested GPIO lines, such as
+ * GPIOHANDLE_REQUEST_OUTPUT, GPIOHANDLE_REQUEST_ACTIVE_LOW etc, OR:ed
+ * together
+ * @default_values: if the GPIOHANDLE_REQUEST_OUTPUT is set in flags,
+ * this specifies the default output value, should be 0 (low) or
+ * 1 (high), anything else than 0 or 1 will be interpreted as 1 (high)
+ * @padding: reserved for future use and should be zero filled
+ */
+struct gpiohandle_config {
+	__u32 flags;
+	__u8 default_values[GPIOHANDLES_MAX];
+	__u32 padding[4]; /* padding for future use */
+};
+
+#define GPIOHANDLE_SET_CONFIG_IOCTL _IOWR(0xB4, 0x0a, struct gpiohandle_config)
+
+/**
  * struct gpiohandle_data - Information of values on a GPIO handle
  * @values: when getting the state of lines this contains the current
  * state of a line, when setting the state of lines these should contain