Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Allow setting bluetooth L2CAP modes via socket option, from Luiz
    Augusto von Dentz.

 2) Add GSO partial support to igc, from Sasha Neftin.

 3) Several cleanups and improvements to r8169 from Heiner Kallweit.

 4) Add IF_OPER_TESTING link state and use it when ethtool triggers a
    device self-test. From Andrew Lunn.

 5) Start moving away from custom driver versions, use the globally
    defined kernel version instead, from Leon Romanovsky.

 6) Support GRO vis gro_cells in DSA layer, from Alexander Lobakin.

 7) Allow hard IRQ deferral during NAPI, from Eric Dumazet.

 8) Add sriov and vf support to hinic, from Luo bin.

 9) Support Media Redundancy Protocol (MRP) in the bridging code, from
    Horatiu Vultur.

10) Support netmap in the nft_nat code, from Pablo Neira Ayuso.

11) Allow UDPv6 encapsulation of ESP in the ipsec code, from Sabrina
    Dubroca. Also add ipv6 support for espintcp.

12) Lots of ReST conversions of the networking documentation, from Mauro
    Carvalho Chehab.

13) Support configuration of ethtool rxnfc flows in bcmgenet driver,
    from Doug Berger.

14) Allow to dump cgroup id and filter by it in inet_diag code, from
    Dmitry Yakunin.

15) Add infrastructure to export netlink attribute policies to
    userspace, from Johannes Berg.

16) Several optimizations to sch_fq scheduler, from Eric Dumazet.

17) Fallback to the default qdisc if qdisc init fails because otherwise
    a packet scheduler init failure will make a device inoperative. From
    Jesper Dangaard Brouer.

18) Several RISCV bpf jit optimizations, from Luke Nelson.

19) Correct the return type of the ->ndo_start_xmit() method in several
    drivers, it's netdev_tx_t but many drivers were using
    'int'. From Yunjian Wang.

20) Add an ethtool interface for PHY master/slave config, from Oleksij
    Rempel.

21) Add BPF iterators, from Yonghang Song.

22) Add cable test infrastructure, including ethool interfaces, from
    Andrew Lunn. Marvell PHY driver is the first to support this
    facility.

23) Remove zero-length arrays all over, from Gustavo A. R. Silva.

24) Calculate and maintain an explicit frame size in XDP, from Jesper
    Dangaard Brouer.

25) Add CAP_BPF, from Alexei Starovoitov.

26) Support terse dumps in the packet scheduler, from Vlad Buslov.

27) Support XDP_TX bulking in dpaa2 driver, from Ioana Ciornei.

28) Add devm_register_netdev(), from Bartosz Golaszewski.

29) Minimize qdisc resets, from Cong Wang.

30) Get rid of kernel_getsockopt and kernel_setsockopt in order to
    eliminate set_fs/get_fs calls. From Christoph Hellwig.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2517 commits)
  selftests: net: ip_defrag: ignore EPERM
  net_failover: fixed rollback in net_failover_open()
  Revert "tipc: Fix potential tipc_aead refcnt leak in tipc_crypto_rcv"
  Revert "tipc: Fix potential tipc_node refcnt leak in tipc_rcv"
  vmxnet3: allow rx flow hash ops only when rss is enabled
  hinic: add set_channels ethtool_ops support
  selftests/bpf: Add a default $(CXX) value
  tools/bpf: Don't use $(COMPILE.c)
  bpf, selftests: Use bpf_probe_read_kernel
  s390/bpf: Use bcr 0,%0 as tail call nop filler
  s390/bpf: Maintain 8-byte stack alignment
  selftests/bpf: Fix verifier test
  selftests/bpf: Fix sample_cnt shared between two threads
  bpf, selftests: Adapt cls_redirect to call csum_level helper
  bpf: Add csum_level helper for fixing up csum levels
  bpf: Fix up bpf_skb_adjust_room helper's skb csum setting
  sfc: add missing annotation for efx_ef10_try_update_nic_stats_vf()
  crypto/chtls: IPv6 support for inline TLS
  Crypto/chcr: Fixes a coccinile check error
  Crypto/chcr: Fixes compilations warnings
  ...

2 files changed, 236 insertions, 7 deletions

diff --git a/kernel/trace/bpf_trace.c b/kernel/trace/bpf_trace.c
index 92ba69b716dc..3744372a24e2 100644
--- a/kernel/trace/bpf_trace.c
+++ b/kernel/trace/bpf_trace.c
@@ -147,7 +147,7 @@ BPF_CALL_3(bpf_probe_read_user, void *, dst, u32, size,
 	return ret;
 }
 
-static const struct bpf_func_proto bpf_probe_read_user_proto = {
+const struct bpf_func_proto bpf_probe_read_user_proto = {
 	.func		= bpf_probe_read_user,
 	.gpl_only	= true,
 	.ret_type	= RET_INTEGER,
@@ -167,7 +167,7 @@ BPF_CALL_3(bpf_probe_read_user_str, void *, dst, u32, size,
 	return ret;
 }
 
-static const struct bpf_func_proto bpf_probe_read_user_str_proto = {
+const struct bpf_func_proto bpf_probe_read_user_str_proto = {
 	.func		= bpf_probe_read_user_str,
 	.gpl_only	= true,
 	.ret_type	= RET_INTEGER,
@@ -198,7 +198,7 @@ BPF_CALL_3(bpf_probe_read_kernel, void *, dst, u32, size,
 	return bpf_probe_read_kernel_common(dst, size, unsafe_ptr, false);
 }
 
-static const struct bpf_func_proto bpf_probe_read_kernel_proto = {
+const struct bpf_func_proto bpf_probe_read_kernel_proto = {
 	.func		= bpf_probe_read_kernel,
 	.gpl_only	= true,
 	.ret_type	= RET_INTEGER,
@@ -253,7 +253,7 @@ BPF_CALL_3(bpf_probe_read_kernel_str, void *, dst, u32, size,
 	return bpf_probe_read_kernel_str_common(dst, size, unsafe_ptr, false);
 }
 
-static const struct bpf_func_proto bpf_probe_read_kernel_str_proto = {
+const struct bpf_func_proto bpf_probe_read_kernel_str_proto = {
 	.func		= bpf_probe_read_kernel_str,
 	.gpl_only	= true,
 	.ret_type	= RET_INTEGER,
@@ -315,6 +315,9 @@ static const struct bpf_func_proto bpf_probe_write_user_proto = {
 
 static const struct bpf_func_proto *bpf_get_probe_write_proto(void)
 {
+	if (!capable(CAP_SYS_ADMIN))
+		return NULL;
+
 	pr_warn_ratelimited("%s[%d] is installing a program with bpf_probe_write_user helper that may corrupt user memory!",
 			    current->comm, task_pid_nr(current));
 
@@ -487,6 +490,212 @@ const struct bpf_func_proto *bpf_get_trace_printk_proto(void)
 	return &bpf_trace_printk_proto;
 }
 
+#define MAX_SEQ_PRINTF_VARARGS		12
+#define MAX_SEQ_PRINTF_MAX_MEMCPY	6
+#define MAX_SEQ_PRINTF_STR_LEN		128
+
+struct bpf_seq_printf_buf {
+	char buf[MAX_SEQ_PRINTF_MAX_MEMCPY][MAX_SEQ_PRINTF_STR_LEN];
+};
+static DEFINE_PER_CPU(struct bpf_seq_printf_buf, bpf_seq_printf_buf);
+static DEFINE_PER_CPU(int, bpf_seq_printf_buf_used);
+
+BPF_CALL_5(bpf_seq_printf, struct seq_file *, m, char *, fmt, u32, fmt_size,
+	   const void *, data, u32, data_len)
+{
+	int err = -EINVAL, fmt_cnt = 0, memcpy_cnt = 0;
+	int i, buf_used, copy_size, num_args;
+	u64 params[MAX_SEQ_PRINTF_VARARGS];
+	struct bpf_seq_printf_buf *bufs;
+	const u64 *args = data;
+
+	buf_used = this_cpu_inc_return(bpf_seq_printf_buf_used);
+	if (WARN_ON_ONCE(buf_used > 1)) {
+		err = -EBUSY;
+		goto out;
+	}
+
+	bufs = this_cpu_ptr(&bpf_seq_printf_buf);
+
+	/*
+	 * bpf_check()->check_func_arg()->check_stack_boundary()
+	 * guarantees that fmt points to bpf program stack,
+	 * fmt_size bytes of it were initialized and fmt_size > 0
+	 */
+	if (fmt[--fmt_size] != 0)
+		goto out;
+
+	if (data_len & 7)
+		goto out;
+
+	for (i = 0; i < fmt_size; i++) {
+		if (fmt[i] == '%') {
+			if (fmt[i + 1] == '%')
+				i++;
+			else if (!data || !data_len)
+				goto out;
+		}
+	}
+
+	num_args = data_len / 8;
+
+	/* check format string for allowed specifiers */
+	for (i = 0; i < fmt_size; i++) {
+		/* only printable ascii for now. */
+		if ((!isprint(fmt[i]) && !isspace(fmt[i])) || !isascii(fmt[i])) {
+			err = -EINVAL;
+			goto out;
+		}
+
+		if (fmt[i] != '%')
+			continue;
+
+		if (fmt[i + 1] == '%') {
+			i++;
+			continue;
+		}
+
+		if (fmt_cnt >= MAX_SEQ_PRINTF_VARARGS) {
+			err = -E2BIG;
+			goto out;
+		}
+
+		if (fmt_cnt >= num_args) {
+			err = -EINVAL;
+			goto out;
+		}
+
+		/* fmt[i] != 0 && fmt[last] == 0, so we can access fmt[i + 1] */
+		i++;
+
+		/* skip optional "[0 +-][num]" width formating field */
+		while (fmt[i] == '0' || fmt[i] == '+'  || fmt[i] == '-' ||
+		       fmt[i] == ' ')
+			i++;
+		if (fmt[i] >= '1' && fmt[i] <= '9') {
+			i++;
+			while (fmt[i] >= '0' && fmt[i] <= '9')
+				i++;
+		}
+
+		if (fmt[i] == 's') {
+			/* try our best to copy */
+			if (memcpy_cnt >= MAX_SEQ_PRINTF_MAX_MEMCPY) {
+				err = -E2BIG;
+				goto out;
+			}
+
+			err = strncpy_from_unsafe_strict(bufs->buf[memcpy_cnt],
+							 (void *) (long) args[fmt_cnt],
+							 MAX_SEQ_PRINTF_STR_LEN);
+			if (err < 0)
+				bufs->buf[memcpy_cnt][0] = '\0';
+			params[fmt_cnt] = (u64)(long)bufs->buf[memcpy_cnt];
+
+			fmt_cnt++;
+			memcpy_cnt++;
+			continue;
+		}
+
+		if (fmt[i] == 'p') {
+			if (fmt[i + 1] == 0 ||
+			    fmt[i + 1] == 'K' ||
+			    fmt[i + 1] == 'x') {
+				/* just kernel pointers */
+				params[fmt_cnt] = args[fmt_cnt];
+				fmt_cnt++;
+				continue;
+			}
+
+			/* only support "%pI4", "%pi4", "%pI6" and "%pi6". */
+			if (fmt[i + 1] != 'i' && fmt[i + 1] != 'I') {
+				err = -EINVAL;
+				goto out;
+			}
+			if (fmt[i + 2] != '4' && fmt[i + 2] != '6') {
+				err = -EINVAL;
+				goto out;
+			}
+
+			if (memcpy_cnt >= MAX_SEQ_PRINTF_MAX_MEMCPY) {
+				err = -E2BIG;
+				goto out;
+			}
+
+
+			copy_size = (fmt[i + 2] == '4') ? 4 : 16;
+
+			err = probe_kernel_read(bufs->buf[memcpy_cnt],
+						(void *) (long) args[fmt_cnt],
+						copy_size);
+			if (err < 0)
+				memset(bufs->buf[memcpy_cnt], 0, copy_size);
+			params[fmt_cnt] = (u64)(long)bufs->buf[memcpy_cnt];
+
+			i += 2;
+			fmt_cnt++;
+			memcpy_cnt++;
+			continue;
+		}
+
+		if (fmt[i] == 'l') {
+			i++;
+			if (fmt[i] == 'l')
+				i++;
+		}
+
+		if (fmt[i] != 'i' && fmt[i] != 'd' &&
+		    fmt[i] != 'u' && fmt[i] != 'x') {
+			err = -EINVAL;
+			goto out;
+		}
+
+		params[fmt_cnt] = args[fmt_cnt];
+		fmt_cnt++;
+	}
+
+	/* Maximumly we can have MAX_SEQ_PRINTF_VARARGS parameter, just give
+	 * all of them to seq_printf().
+	 */
+	seq_printf(m, fmt, params[0], params[1], params[2], params[3],
+		   params[4], params[5], params[6], params[7], params[8],
+		   params[9], params[10], params[11]);
+
+	err = seq_has_overflowed(m) ? -EOVERFLOW : 0;
+out:
+	this_cpu_dec(bpf_seq_printf_buf_used);
+	return err;
+}
+
+static int bpf_seq_printf_btf_ids[5];
+static const struct bpf_func_proto bpf_seq_printf_proto = {
+	.func		= bpf_seq_printf,
+	.gpl_only	= true,
+	.ret_type	= RET_INTEGER,
+	.arg1_type	= ARG_PTR_TO_BTF_ID,
+	.arg2_type	= ARG_PTR_TO_MEM,
+	.arg3_type	= ARG_CONST_SIZE,
+	.arg4_type      = ARG_PTR_TO_MEM_OR_NULL,
+	.arg5_type      = ARG_CONST_SIZE_OR_ZERO,
+	.btf_id		= bpf_seq_printf_btf_ids,
+};
+
+BPF_CALL_3(bpf_seq_write, struct seq_file *, m, const void *, data, u32, len)
+{
+	return seq_write(m, data, len) ? -EOVERFLOW : 0;
+}
+
+static int bpf_seq_write_btf_ids[5];
+static const struct bpf_func_proto bpf_seq_write_proto = {
+	.func		= bpf_seq_write,
+	.gpl_only	= true,
+	.ret_type	= RET_INTEGER,
+	.arg1_type	= ARG_PTR_TO_BTF_ID,
+	.arg2_type	= ARG_PTR_TO_MEM,
+	.arg3_type	= ARG_CONST_SIZE_OR_ZERO,
+	.btf_id		= bpf_seq_write_btf_ids,
+};
+
 static __always_inline int
 get_map_perf_counter(struct bpf_map *map, u64 flags,
 		     u64 *value, u64 *enabled, u64 *running)
@@ -698,7 +907,7 @@ BPF_CALL_0(bpf_get_current_task)
 	return (long) current;
 }
 
-static const struct bpf_func_proto bpf_get_current_task_proto = {
+const struct bpf_func_proto bpf_get_current_task_proto = {
 	.func		= bpf_get_current_task,
 	.gpl_only	= true,
 	.ret_type	= RET_INTEGER,
@@ -827,6 +1036,8 @@ bpf_tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_map_peek_elem_proto;
 	case BPF_FUNC_ktime_get_ns:
 		return &bpf_ktime_get_ns_proto;
+	case BPF_FUNC_ktime_get_boot_ns:
+		return &bpf_ktime_get_boot_ns_proto;
 	case BPF_FUNC_tail_call:
 		return &bpf_tail_call_proto;
 	case BPF_FUNC_get_current_pid_tgid:
@@ -877,6 +1088,16 @@ bpf_tracing_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 		return &bpf_perf_event_read_value_proto;
 	case BPF_FUNC_get_ns_current_pid_tgid:
 		return &bpf_get_ns_current_pid_tgid_proto;
+	case BPF_FUNC_ringbuf_output:
+		return &bpf_ringbuf_output_proto;
+	case BPF_FUNC_ringbuf_reserve:
+		return &bpf_ringbuf_reserve_proto;
+	case BPF_FUNC_ringbuf_submit:
+		return &bpf_ringbuf_submit_proto;
+	case BPF_FUNC_ringbuf_discard:
+		return &bpf_ringbuf_discard_proto;
+	case BPF_FUNC_ringbuf_query:
+		return &bpf_ringbuf_query_proto;
 	default:
 		return NULL;
 	}
@@ -1246,7 +1467,7 @@ raw_tp_prog_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 	}
 }
 
-static const struct bpf_func_proto *
+const struct bpf_func_proto *
 tracing_prog_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 {
 	switch (func_id) {
@@ -1256,6 +1477,14 @@ tracing_prog_func_proto(enum bpf_func_id func_id, const struct bpf_prog *prog)
 	case BPF_FUNC_xdp_output:
 		return &bpf_xdp_output_proto;
 #endif
+	case BPF_FUNC_seq_printf:
+		return prog->expected_attach_type == BPF_TRACE_ITER ?
+		       &bpf_seq_printf_proto :
+		       NULL;
+	case BPF_FUNC_seq_write:
+		return prog->expected_attach_type == BPF_TRACE_ITER ?
+		       &bpf_seq_write_proto :
+		       NULL;
 	default:
 		return raw_tp_prog_func_proto(func_id, prog);
 	}
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 0b144926bd73..3ab27022c20f 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2662,7 +2662,7 @@ static void output_printk(struct trace_event_buffer *fbuffer)
 }
 
 int tracepoint_printk_sysctl(struct ctl_table *table, int write,
-			     void __user *buffer, size_t *lenp,
+			     void *buffer, size_t *lenp,
 			     loff_t *ppos)
 {
 	int save_tracepoint_printk;