Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:

 1) Fix some length checks during OGM processing in batman-adv, from
    Sven Eckelmann.

 2) Fix regression that caused netfilter conntrack sysctls to not be
    per-netns any more. From Florian Westphal.

 3) Use after free in netpoll, from Feng Sun.

 4) Guard destruction of pfifo_fast per-cpu qdisc stats with
    qdisc_is_percpu_stats(), from Davide Caratti. Similar bug is fixed
    in pfifo_fast_enqueue().

 5) Fix memory leak in mld_del_delrec(), from Eric Dumazet.

 6) Handle neigh events on internal ports correctly in nfp, from John
    Hurley.

 7) Clear SKB timestamp in NF flow table code so that it does not
    confuse fq scheduler. From Florian Westphal.

 8) taprio destroy can crash if it is invoked in a failure path of
    taprio_init(), because the list head isn't setup properly yet and
    the list del is unconditional. Perform the list add earlier to
    address this. From Vladimir Oltean.

 9) Make sure to reapply vlan filters on device up, in aquantia driver.
    From Dmitry Bogdanov.

10) sgiseeq driver releases DMA memory using free_page() instead of
    dma_free_attrs(). From Christophe JAILLET.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (58 commits)
  net: seeq: Fix the function used to release some memory in an error handling path
  enetc: Add missing call to 'pci_free_irq_vectors()' in probe and remove functions
  net: bcmgenet: use ethtool_op_get_ts_info()
  tc-testing: don't hardcode 'ip' in nsPlugin.py
  net: dsa: microchip: add KSZ8563 compatibility string
  dt-bindings: net: dsa: document additional Microchip KSZ8563 switch
  net: aquantia: fix out of memory condition on rx side
  net: aquantia: linkstate irq should be oneshot
  net: aquantia: reapply vlan filters on up
  net: aquantia: fix limit of vlan filters
  net: aquantia: fix removal of vlan 0
  net/sched: cbs: Set default link speed to 10 Mbps in cbs_set_port_rate
  taprio: Set default link speed to 10 Mbps in taprio_set_picos_per_byte
  taprio: Fix kernel panic in taprio_destroy
  net: dsa: microchip: fill regmap_config name
  rxrpc: Fix lack of conn cleanup when local endpoint is cleaned up [ver #2]
  net: stmmac: dwmac-rk: Don't fail if phy regulator is absent
  amd-xgbe: Fix error path in xgbe_mod_init()
  netfilter: nft_meta_bridge: Fix get NFT_META_BRI_IIFVPROTO in network byteorder
  mac80211: Correctly set noencrypt for PAE frames
  ...

1 files changed, 93 insertions, 67 deletions

diff --git a/net/openvswitch/flow.c b/net/openvswitch/flow.c
index bc89e16e0505..9d81d2c7bf82 100644
--- a/net/openvswitch/flow.c
+++ b/net/openvswitch/flow.c
@@ -523,78 +523,15 @@ static int parse_nsh(struct sk_buff *skb, struct sw_flow_key *key)
 }
 
 /**
- * key_extract - extracts a flow key from an Ethernet frame.
+ * key_extract_l3l4 - extracts L3/L4 header information.
  * @skb: sk_buff that contains the frame, with skb->data pointing to the
- * Ethernet header
+ *       L3 header
  * @key: output flow key
  *
- * The caller must ensure that skb->len >= ETH_HLEN.
- *
- * Returns 0 if successful, otherwise a negative errno value.
- *
- * Initializes @skb header fields as follows:
- *
- *    - skb->mac_header: the L2 header.
- *
- *    - skb->network_header: just past the L2 header, or just past the
- *      VLAN header, to the first byte of the L2 payload.
- *
- *    - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6
- *      on output, then just past the IP header, if one is present and
- *      of a correct length, otherwise the same as skb->network_header.
- *      For other key->eth.type values it is left untouched.
- *
- *    - skb->protocol: the type of the data starting at skb->network_header.
- *      Equals to key->eth.type.
  */
-static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
+static int key_extract_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
 {
 	int error;
-	struct ethhdr *eth;
-
-	/* Flags are always used as part of stats */
-	key->tp.flags = 0;
-
-	skb_reset_mac_header(skb);
-
-	/* Link layer. */
-	clear_vlan(key);
-	if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
-		if (unlikely(eth_type_vlan(skb->protocol)))
-			return -EINVAL;
-
-		skb_reset_network_header(skb);
-		key->eth.type = skb->protocol;
-	} else {
-		eth = eth_hdr(skb);
-		ether_addr_copy(key->eth.src, eth->h_source);
-		ether_addr_copy(key->eth.dst, eth->h_dest);
-
-		__skb_pull(skb, 2 * ETH_ALEN);
-		/* We are going to push all headers that we pull, so no need to
-		* update skb->csum here.
-		*/
-
-		if (unlikely(parse_vlan(skb, key)))
-			return -ENOMEM;
-
-		key->eth.type = parse_ethertype(skb);
-		if (unlikely(key->eth.type == htons(0)))
-			return -ENOMEM;
-
-		/* Multiple tagged packets need to retain TPID to satisfy
-		 * skb_vlan_pop(), which will later shift the ethertype into
-		 * skb->protocol.
-		 */
-		if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK))
-			skb->protocol = key->eth.cvlan.tpid;
-		else
-			skb->protocol = key->eth.type;
-
-		skb_reset_network_header(skb);
-		__skb_push(skb, skb->data - skb_mac_header(skb));
-	}
-	skb_reset_mac_len(skb);
 
 	/* Network layer. */
 	if (key->eth.type == htons(ETH_P_IP)) {
@@ -623,6 +560,7 @@ static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
 		offset = nh->frag_off & htons(IP_OFFSET);
 		if (offset) {
 			key->ip.frag = OVS_FRAG_TYPE_LATER;
+			memset(&key->tp, 0, sizeof(key->tp));
 			return 0;
 		}
 		if (nh->frag_off & htons(IP_MF) ||
@@ -740,8 +678,10 @@ static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
 			return error;
 		}
 
-		if (key->ip.frag == OVS_FRAG_TYPE_LATER)
+		if (key->ip.frag == OVS_FRAG_TYPE_LATER) {
+			memset(&key->tp, 0, sizeof(key->tp));
 			return 0;
+		}
 		if (skb_shinfo(skb)->gso_type & SKB_GSO_UDP)
 			key->ip.frag = OVS_FRAG_TYPE_FIRST;
 
@@ -788,6 +728,92 @@ static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
 	return 0;
 }
 
+/**
+ * key_extract - extracts a flow key from an Ethernet frame.
+ * @skb: sk_buff that contains the frame, with skb->data pointing to the
+ * Ethernet header
+ * @key: output flow key
+ *
+ * The caller must ensure that skb->len >= ETH_HLEN.
+ *
+ * Returns 0 if successful, otherwise a negative errno value.
+ *
+ * Initializes @skb header fields as follows:
+ *
+ *    - skb->mac_header: the L2 header.
+ *
+ *    - skb->network_header: just past the L2 header, or just past the
+ *      VLAN header, to the first byte of the L2 payload.
+ *
+ *    - skb->transport_header: If key->eth.type is ETH_P_IP or ETH_P_IPV6
+ *      on output, then just past the IP header, if one is present and
+ *      of a correct length, otherwise the same as skb->network_header.
+ *      For other key->eth.type values it is left untouched.
+ *
+ *    - skb->protocol: the type of the data starting at skb->network_header.
+ *      Equals to key->eth.type.
+ */
+static int key_extract(struct sk_buff *skb, struct sw_flow_key *key)
+{
+	struct ethhdr *eth;
+
+	/* Flags are always used as part of stats */
+	key->tp.flags = 0;
+
+	skb_reset_mac_header(skb);
+
+	/* Link layer. */
+	clear_vlan(key);
+	if (ovs_key_mac_proto(key) == MAC_PROTO_NONE) {
+		if (unlikely(eth_type_vlan(skb->protocol)))
+			return -EINVAL;
+
+		skb_reset_network_header(skb);
+		key->eth.type = skb->protocol;
+	} else {
+		eth = eth_hdr(skb);
+		ether_addr_copy(key->eth.src, eth->h_source);
+		ether_addr_copy(key->eth.dst, eth->h_dest);
+
+		__skb_pull(skb, 2 * ETH_ALEN);
+		/* We are going to push all headers that we pull, so no need to
+		 * update skb->csum here.
+		 */
+
+		if (unlikely(parse_vlan(skb, key)))
+			return -ENOMEM;
+
+		key->eth.type = parse_ethertype(skb);
+		if (unlikely(key->eth.type == htons(0)))
+			return -ENOMEM;
+
+		/* Multiple tagged packets need to retain TPID to satisfy
+		 * skb_vlan_pop(), which will later shift the ethertype into
+		 * skb->protocol.
+		 */
+		if (key->eth.cvlan.tci & htons(VLAN_CFI_MASK))
+			skb->protocol = key->eth.cvlan.tpid;
+		else
+			skb->protocol = key->eth.type;
+
+		skb_reset_network_header(skb);
+		__skb_push(skb, skb->data - skb_mac_header(skb));
+	}
+
+	skb_reset_mac_len(skb);
+
+	/* Fill out L3/L4 key info, if any */
+	return key_extract_l3l4(skb, key);
+}
+
+/* In the case of conntrack fragment handling it expects L3 headers,
+ * add a helper.
+ */
+int ovs_flow_key_update_l3l4(struct sk_buff *skb, struct sw_flow_key *key)
+{
+	return key_extract_l3l4(skb, key);
+}
+
 int ovs_flow_key_update(struct sk_buff *skb, struct sw_flow_key *key)
 {
 	int res;