sctp: allow changing transport encap_port by peer packets

As rfc6951#section-5.4 says:

  "After finding the SCTP association (which
   includes checking the verification tag), the UDP source port MUST be
   stored as the encapsulation port for the destination address the SCTP
   packet is received from (see Section 5.1).

   When a non-encapsulated SCTP packet is received by the SCTP stack,
   the encapsulation of outgoing packets belonging to the same
   association and the corresponding destination address MUST be
   disabled."

transport encap_port should be updated by a validated incoming packet's
udp src port.

We save the udp src port in sctp_input_cb->encap_port, and then update
the transport in two places:

  1. right after vtag is verified, which is required by RFC, and this
     allows the existent transports to be updated by the chunks that
     can only be processed on an asoc.

  2. right before processing the 'init' where the transports are added,
     and this allows building a sctp over udp connection by client with
     the server not knowing the remote encap port.

  3. when processing ootb_pkt and creating the temporary transport for
     the reply pkt.

Note that sctp_input_cb->header is removed, as it's not used any more
in sctp.

v1->v2:
  - Change encap_port as __be16 for sctp_input_cb.

Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

4 files changed, 14 insertions, 1 deletions

diff --git a/net/sctp/ipv6.c b/net/sctp/ipv6.c
index 8a58f42d6d19..a064bf252b17 100644
--- a/net/sctp/ipv6.c
+++ b/net/sctp/ipv6.c
@@ -1053,6 +1053,7 @@ static struct inet_protosw sctpv6_stream_protosw = {
 
 static int sctp6_rcv(struct sk_buff *skb)
 {
+	memset(skb->cb, 0, sizeof(skb->cb));
 	return sctp_rcv(skb) ? -1 : 0;
 }
 
diff --git a/net/sctp/protocol.c b/net/sctp/protocol.c
index 89dfd313e113..f3de8c03a15e 100644
--- a/net/sctp/protocol.c
+++ b/net/sctp/protocol.c
@@ -843,6 +843,9 @@ static int sctp_ctl_sock_init(struct net *net)
 
 static int sctp_udp_rcv(struct sock *sk, struct sk_buff *skb)
 {
+	memset(skb->cb, 0, sizeof(skb->cb));
+	SCTP_INPUT_CB(skb)->encap_port = udp_hdr(skb)->source;
+
 	skb_set_transport_header(skb, sizeof(struct udphdr));
 	sctp_rcv(skb);
 	return 0;
@@ -1139,9 +1142,15 @@ static struct inet_protosw sctp_stream_protosw = {
 	.flags      = SCTP_PROTOSW_FLAG
 };
 
+static int sctp4_rcv(struct sk_buff *skb)
+{
+	memset(skb->cb, 0, sizeof(skb->cb));
+	return sctp_rcv(skb);
+}
+
 /* Register with IP layer.  */
 static const struct net_protocol sctp_protocol = {
-	.handler     = sctp_rcv,
+	.handler     = sctp4_rcv,
 	.err_handler = sctp_v4_err,
 	.no_policy   = 1,
 	.netns_ok    = 1,
diff --git a/net/sctp/sm_make_chunk.c b/net/sctp/sm_make_chunk.c
index 9a56ae2f3651..21d0ff1c6ab9 100644
--- a/net/sctp/sm_make_chunk.c
+++ b/net/sctp/sm_make_chunk.c
@@ -2321,6 +2321,7 @@ int sctp_process_init(struct sctp_association *asoc, struct sctp_chunk *chunk,
 	 * added as the primary transport.  The source address seems to
 	 * be a better choice than any of the embedded addresses.
 	 */
+	asoc->encap_port = SCTP_INPUT_CB(chunk->skb)->encap_port;
 	if (!sctp_assoc_add_peer(asoc, peer_addr, gfp, SCTP_ACTIVE))
 		goto nomem;
 
diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c
index c669f8bd1eab..8edab1533057 100644
--- a/net/sctp/sm_statefuns.c
+++ b/net/sctp/sm_statefuns.c
@@ -6268,6 +6268,8 @@ static struct sctp_packet *sctp_ootb_pkt_new(
 	if (!transport)
 		goto nomem;
 
+	transport->encap_port = SCTP_INPUT_CB(chunk->skb)->encap_port;
+
 	/* Cache a route for the transport with the chunk's destination as
 	 * the source address.
 	 */