Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Here we go, another merge window full of networking and #ebpf changes:

   1) Snoop DHCPACKS in batman-adv to learn MAC/IP pairs in the DHCP
      range without dealing with floods of ARP traffic, from Linus
      Lüssing.

   2) Throttle buffered multicast packet transmission in mt76, from
      Felix Fietkau.

   3) Support adaptive interrupt moderation in ice, from Brett Creeley.

   4) A lot of struct_size conversions, from Gustavo A. R. Silva.

   5) Add peek/push/pop commands to bpftool, as well as bash completion,
      from Stanislav Fomichev.

   6) Optimize sk_msg_clone(), from Vakul Garg.

   7) Add SO_BINDTOIFINDEX, from David Herrmann.

   8) Be more conservative with local resends due to local congestion,
      from Yuchung Cheng.

   9) Allow vetoing of unsupported VXLAN FDBs, from Petr Machata.

  10) Add health buffer support to devlink, from Eran Ben Elisha.

  11) Add TXQ scheduling API to mac80211, from Toke Høiland-Jørgensen.

  12) Add statistics to basic packet scheduler filter, from Cong Wang.

  13) Add GRE tunnel support for mlxsw Spectrum-2, from Nir Dotan.

  14) Lots of new IP tunneling forwarding tests, also from Nir Dotan.

  15) Add 3ad stats to bonding, from Nikolay Aleksandrov.

  16) Lots of probing improvements for bpftool, from Quentin Monnet.

  17) Various nfp drive #ebpf JIT improvements from Jakub Kicinski.

  18) Allow #ebpf programs to access gso_segs from skb shared info, from
      Eric Dumazet.

  19) Add sock_diag support for AF_XDP sockets, from Björn Töpel.

  20) Support 22260 iwlwifi devices, from Luca Coelho.

  21) Use rbtree for ipv6 defragmentation, from Peter Oskolkov.

  22) Add JMP32 instruction class support to #ebpf, from Jiong Wang.

  23) Add spinlock support to #ebpf, from Alexei Starovoitov.

  24) Support 256-bit keys and TLS 1.3 in ktls, from Dave Watson.

  25) Add device infomation API to devlink, from Jakub Kicinski.

  26) Add new timestamping socket options which are y2038 safe, from
      Deepa Dinamani.

  27) Add RX checksum offloading for various sh_eth chips, from Sergei
      Shtylyov.

  28) Flow offload infrastructure, from Pablo Neira Ayuso.

  29) Numerous cleanups, improvements, and bug fixes to the PHY layer
      and many drivers from Heiner Kallweit.

  30) Lots of changes to try and make packet scheduler classifiers run
      lockless as much as possible, from Vlad Buslov.

  31) Support BCM957504 chip in bnxt_en driver, from Erik Burrows.

  32) Add concurrency tests to tc-tests infrastructure, from Vlad
      Buslov.

  33) Add hwmon support to aquantia, from Heiner Kallweit.

  34) Allow 64-bit values for SO_MAX_PACING_RATE, from Eric Dumazet.

  And I would be remiss if I didn't thank the various major networking
  subsystem maintainers for integrating much of this work before I even
  saw it. Alexei Starovoitov, Daniel Borkmann, Pablo Neira Ayuso,
  Johannes Berg, Kalle Valo, and many others. Thank you!"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (2207 commits)
  net/sched: avoid unused-label warning
  net: ignore sysctl_devconf_inherit_init_net without SYSCTL
  phy: mdio-mux: fix Kconfig dependencies
  net: phy: use phy_modify_mmd_changed in genphy_c45_an_config_aneg
  net: dsa: mv88e6xxx: add call to mv88e6xxx_ports_cmode_init to probe for new DSA framework
  selftest/net: Remove duplicate header
  sky2: Disable MSI on Dell Inspiron 1545 and Gateway P-79
  net/mlx5e: Update tx reporter status in case channels were successfully opened
  devlink: Add support for direct reporter health state update
  devlink: Update reporter state to error even if recover aborted
  sctp: call iov_iter_revert() after sending ABORT
  team: Free BPF filter when unregistering netdev
  ip6mr: Do not call __IP6_INC_STATS() from preemptible context
  isdn: mISDN: Fix potential NULL pointer dereference of kzalloc
  net: dsa: mv88e6xxx: support in-band signalling on SGMII ports with external PHYs
  cxgb4/chtls: Prefix adapter flags with CXGB4
  net-sysfs: Switch to bitmap_zalloc()
  mellanox: Switch to bitmap_zalloc()
  bpf: add test cases for non-pointer sanitiation logic
  mlxsw: i2c: Extend initialization by querying resources data
  ...

1 files changed, 436 insertions, 0 deletions

diff --git a/samples/bpf/do_hbm_test.sh b/samples/bpf/do_hbm_test.sh
new file mode 100755
index 000000000000..56c8b4115c95
--- /dev/null
+++ b/samples/bpf/do_hbm_test.sh
@@ -0,0 +1,436 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Copyright (c) 2019 Facebook
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of version 2 of the GNU General Public
+# License as published by the Free Software Foundation.
+
+Usage() {
+  echo "Script for testing HBM (Host Bandwidth Manager) framework."
+  echo "It creates a cgroup to use for testing and load a BPF program to limit"
+  echo "egress or ingress bandwidht. It then uses iperf3 or netperf to create"
+  echo "loads. The output is the goodput in Mbps (unless -D was used)."
+  echo ""
+  echo "USAGE: $name [out] [-b=<prog>|--bpf=<prog>] [-c=<cc>|--cc=<cc>] [-D]"
+  echo "             [-d=<delay>|--delay=<delay>] [--debug] [-E]"
+  echo "             [-f=<#flows>|--flows=<#flows>] [-h] [-i=<id>|--id=<id >]"
+  echo "             [-l] [-N] [-p=<port>|--port=<port>] [-P]"
+  echo "             [-q=<qdisc>] [-R] [-s=<server>|--server=<server]"
+  echo "             [-S|--stats] -t=<time>|--time=<time>] [-w] [cubic|dctcp]"
+  echo "  Where:"
+  echo "    out               egress (default)"
+  echo "    -b or --bpf       BPF program filename to load and attach."
+  echo "                      Default is hbm_out_kern.o for egress,"
+  echo "    -c or -cc         TCP congestion control (cubic or dctcp)"
+  echo "    --debug           print BPF trace buffer"
+  echo "    -d or --delay     add a delay in ms using netem"
+  echo "    -D                In addition to the goodput in Mbps, it also outputs"
+  echo "                      other detailed information. This information is"
+  echo "                      test dependent (i.e. iperf3 or netperf)."
+  echo "    -E                enable ECN (not required for dctcp)"
+  echo "    -f or --flows     number of concurrent flows (default=1)"
+  echo "    -i or --id        cgroup id (an integer, default is 1)"
+  echo "    -N                use netperf instead of iperf3"
+  echo "    -l                do not limit flows using loopback"
+  echo "    -h                Help"
+  echo "    -p or --port      iperf3 port (default is 5201)"
+  echo "    -P                use an iperf3 instance for each flow"
+  echo "    -q                use the specified qdisc"
+  echo "    -r or --rate      rate in Mbps (default 1s 1Gbps)"
+  echo "    -R                Use TCP_RR for netperf. 1st flow has req"
+  echo "                      size of 10KB, rest of 1MB. Reply in all"
+  echo "                      cases is 1 byte."
+  echo "                      More detailed output for each flow can be found"
+  echo "                      in the files netperf.<cg>.<flow>, where <cg> is the"
+  echo "                      cgroup id as specified with the -i flag, and <flow>"
+  echo "                      is the flow id starting at 1 and increasing by 1 for"
+  echo "                      flow (as specified by -f)."
+  echo "    -s or --server    hostname of netperf server. Used to create netperf"
+  echo "                      test traffic between to hosts (default is within host)"
+  echo "                      netserver must be running on the host."
+  echo "    -S or --stats     whether to update hbm stats (default is yes)."
+  echo "    -t or --time      duration of iperf3 in seconds (default=5)"
+  echo "    -w                Work conserving flag. cgroup can increase its"
+  echo "                      bandwidth beyond the rate limit specified"
+  echo "                      while there is available bandwidth. Current"
+  echo "                      implementation assumes there is only one NIC"
+  echo "                      (eth0), but can be extended to support multiple"
+  echo "                       NICs."
+  echo "    cubic or dctcp    specify which TCP CC to use"
+  echo " "
+  exit
+}
+
+#set -x
+
+debug_flag=0
+args="$@"
+name="$0"
+netem=0
+cc=x
+dir="-o"
+dir_name="out"
+dur=5
+flows=1
+id=1
+prog=""
+port=5201
+rate=1000
+multi_iperf=0
+flow_cnt=1
+use_netperf=0
+rr=0
+ecn=0
+details=0
+server=""
+qdisc=""
+flags=""
+do_stats=0
+
+function start_hbm () {
+  rm -f hbm.out
+  echo "./hbm $dir -n $id -r $rate -t $dur $flags $dbg $prog" > hbm.out
+  echo " " >> hbm.out
+  ./hbm $dir -n $id -r $rate -t $dur $flags $dbg $prog >> hbm.out 2>&1  &
+  echo $!
+}
+
+processArgs () {
+  for i in $args ; do
+    case $i in
+    # Support for upcomming ingress rate limiting
+    #in)         # support for upcoming ingress rate limiting
+    #  dir="-i"
+    #  dir_name="in"
+    #  ;;
+    out)
+      dir="-o"
+      dir_name="out"
+      ;;
+    -b=*|--bpf=*)
+      prog="${i#*=}"
+      ;;
+    -c=*|--cc=*)
+      cc="${i#*=}"
+      ;;
+    --debug)
+      flags="$flags -d"
+      debug_flag=1
+      ;;
+    -d=*|--delay=*)
+      netem="${i#*=}"
+      ;;
+    -D)
+      details=1
+      ;;
+    -E)
+     ecn=1
+     ;;
+    # Support for upcomming fq Early Departure Time egress rate limiting
+    #--edt)
+    # prog="hbm_out_edt_kern.o"
+    # qdisc="fq"
+    # ;;
+    -f=*|--flows=*)
+      flows="${i#*=}"
+      ;;
+    -i=*|--id=*)
+      id="${i#*=}"
+      ;;
+    -l)
+      flags="$flags -l"
+      ;;
+    -N)
+      use_netperf=1
+      ;;
+    -p=*|--port=*)
+      port="${i#*=}"
+      ;;
+    -P)
+      multi_iperf=1
+      ;;
+    -q=*)
+      qdisc="${i#*=}"
+      ;;
+    -r=*|--rate=*)
+      rate="${i#*=}"
+      ;;
+    -R)
+      rr=1
+      ;;
+    -s=*|--server=*)
+      server="${i#*=}"
+      ;;
+    -S|--stats)
+      flags="$flags -s"
+      do_stats=1
+      ;;
+    -t=*|--time=*)
+      dur="${i#*=}"
+      ;;
+    -w)
+      flags="$flags -w"
+      ;;
+    cubic)
+      cc=cubic
+      ;;
+    dctcp)
+      cc=dctcp
+      ;;
+    *)
+      echo "Unknown arg:$i"
+      Usage
+      ;;
+    esac
+  done
+}
+
+processArgs
+
+if [ $debug_flag -eq 1 ] ; then
+  rm -f hbm_out.log
+fi
+
+hbm_pid=$(start_hbm)
+usleep 100000
+
+host=`hostname`
+cg_base_dir=/sys/fs/cgroup
+cg_dir="$cg_base_dir/cgroup-test-work-dir/hbm$id"
+
+echo $$ >> $cg_dir/cgroup.procs
+
+ulimit -l unlimited
+
+rm -f ss.out
+rm -f hbm.[0-9]*.$dir_name
+if [ $ecn -ne 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_ecn=1
+fi
+
+if [ $use_netperf -eq 0 ] ; then
+  cur_cc=`sysctl -n net.ipv4.tcp_congestion_control`
+  if [ "$cc" != "x" ] ; then
+    sysctl -w -q -n net.ipv4.tcp_congestion_control=$cc
+  fi
+fi
+
+if [ "$netem" -ne "0" ] ; then
+  if [ "$qdisc" != "" ] ; then
+    echo "WARNING: Ignoring -q options because -d option used"
+  fi
+  tc qdisc del dev lo root > /dev/null 2>&1
+  tc qdisc add dev lo root netem delay $netem\ms > /dev/null 2>&1
+elif [ "$qdisc" != "" ] ; then
+  tc qdisc del dev lo root > /dev/null 2>&1
+  tc qdisc add dev lo root $qdisc > /dev/null 2>&1
+fi
+
+n=0
+m=$[$dur * 5]
+hn="::1"
+if [ $use_netperf -ne 0 ] ; then
+  if [ "$server" != "" ] ; then
+    hn=$server
+  fi
+fi
+
+( ping6 -i 0.2 -c $m $hn > ping.out 2>&1 ) &
+
+if [ $use_netperf -ne 0 ] ; then
+  begNetserverPid=`ps ax | grep netserver | grep --invert-match "grep" | \
+                   awk '{ print $1 }'`
+  if [ "$begNetserverPid" == "" ] ; then
+    if [ "$server" == "" ] ; then
+      ( ./netserver > /dev/null 2>&1) &
+      usleep 100000
+    fi
+  fi
+  flow_cnt=1
+  if [ "$server" == "" ] ; then
+    np_server=$host
+  else
+    np_server=$server
+  fi
+  if [ "$cc" == "x" ] ; then
+    np_cc=""
+  else
+    np_cc="-K $cc,$cc"
+  fi
+  replySize=1
+  while [ $flow_cnt -le $flows ] ; do
+    if [ $rr -ne 0 ] ; then
+      reqSize=1M
+      if [ $flow_cnt -eq 1 ] ; then
+        reqSize=10K
+      fi
+      if [ "$dir" == "-i" ] ; then
+        replySize=$reqSize
+        reqSize=1
+      fi
+      ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR  -- -r $reqSize,$replySize $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,REMOTE_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,LOCAL_RECV_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+    else
+      if [ "$dir" == "-i" ] ; then
+        ( ./netperf -H $np_server -l $dur -f m -j -t TCP_RR -- -r 1,10M $np_cc -k P50_LATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REMOTE_TRANSPORT_RETRANS,REMOTE_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+      else
+        ( ./netperf -H $np_server -l $dur -f m -j -t TCP_STREAM -- $np_cc -k P50_lATENCY,P90_LATENCY,LOCAL_TRANSPORT_RETRANS,LOCAL_SEND_THROUGHPUT,REQUEST_SIZE,RESPONSE_SIZE > netperf.$id.$flow_cnt ) &
+      fi
+    fi
+    flow_cnt=$[flow_cnt+1]
+  done
+
+# sleep for duration of test (plus some buffer)
+  n=$[dur+2]
+  sleep $n
+
+# force graceful termination of netperf
+  pids=`pgrep netperf`
+  for p in $pids ; do
+    kill -SIGALRM $p
+  done
+
+  flow_cnt=1
+  rate=0
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for HBM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e hbm.$id.$dir_name ] ; then
+        cat hbm.$id.$dir_name
+      fi
+    fi
+  fi
+  while [ $flow_cnt -le $flows ] ; do
+    if [ "$dir" == "-i" ] ; then
+      r=`cat netperf.$id.$flow_cnt | grep -o "REMOTE_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"`
+    else
+      r=`cat netperf.$id.$flow_cnt | grep -o "LOCAL_SEND_THROUGHPUT=[0-9]*" | grep -o "[0-9]*"`
+    fi
+    echo "rate for flow $flow_cnt: $r"
+    rate=$[rate+r]
+    if [ $details -ne 0 ] ; then
+      echo "-----"
+      echo "Details for cgroup $id, flow $flow_cnt"
+      cat netperf.$id.$flow_cnt
+    fi
+    flow_cnt=$[flow_cnt+1]
+  done
+  if [ $details -ne 0 ] ; then
+    echo ""
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+elif [ $multi_iperf -eq 0 ] ; then
+  (iperf3 -s -p $port -1 > /dev/null 2>&1) &
+  usleep 100000
+  iperf3 -c $host -p $port -i 0 -P $flows -f m -t $dur > iperf.$id
+  rates=`grep receiver iperf.$id | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*"`
+  rate=`echo $rates | grep -o "[0-9]*$"`
+
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for HBM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e hbm.$id.$dir_name ] ; then
+        cat hbm.$id.$dir_name
+      fi
+    fi
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+else
+  flow_cnt=1
+  while [ $flow_cnt -le $flows ] ; do
+    (iperf3 -s -p $port -1 > /dev/null 2>&1) &
+    ( iperf3 -c $host -p $port -i 0 -P 1 -f m -t $dur | grep receiver | grep -o "[0-9.]* Mbits" | grep -o "^[0-9]*" | grep -o "[0-9]*$" > iperf3.$id.$flow_cnt ) &
+    port=$[port+1]
+    flow_cnt=$[flow_cnt+1]
+  done
+  n=$[dur+1]
+  sleep $n
+  flow_cnt=1
+  rate=0
+  if [ $details -ne 0 ] ; then
+    echo ""
+    echo "Details for HBM in cgroup $id"
+    if [ $do_stats -eq 1 ] ; then
+      if [ -e hbm.$id.$dir_name ] ; then
+        cat hbm.$id.$dir_name
+      fi
+    fi
+  fi
+
+  while [ $flow_cnt -le $flows ] ; do
+    r=`cat iperf3.$id.$flow_cnt`
+#    echo "rate for flow $flow_cnt: $r"
+  if [ $details -ne 0 ] ; then
+    echo "Rate for cgroup $id, flow $flow_cnt LOCAL_SEND_THROUGHPUT=$r"
+  fi
+    rate=$[rate+r]
+    flow_cnt=$[flow_cnt+1]
+  done
+  if [ $details -ne 0 ] ; then
+    delay=`grep "avg" ping.out | grep -o "= [0-9.]*/[0-9.]*" | grep -o "[0-9.]*$"`
+    echo "PING AVG DELAY:$delay"
+    echo "AGGREGATE_GOODPUT:$rate"
+  else
+    echo $rate
+  fi
+fi
+
+if [ $use_netperf -eq 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_congestion_control=$cur_cc
+fi
+if [ $ecn -ne 0 ] ; then
+  sysctl -w -q -n net.ipv4.tcp_ecn=0
+fi
+if [ "$netem" -ne "0" ] ; then
+  tc qdisc del dev lo root > /dev/null 2>&1
+fi
+
+sleep 2
+
+hbmPid=`ps ax | grep "hbm " | grep --invert-match "grep" | awk '{ print $1 }'`
+if [ "$hbmPid" == "$hbm_pid" ] ; then
+  kill $hbm_pid
+fi
+
+sleep 1
+
+# Detach any BPF programs that may have lingered
+ttx=`bpftool cgroup tree | grep hbm`
+v=2
+for x in $ttx ; do
+    if [ "${x:0:36}" == "/sys/fs/cgroup/cgroup-test-work-dir/" ] ; then
+	cg=$x ; v=0
+    else
+	if [ $v -eq 0 ] ; then
+	    id=$x ; v=1
+	else
+	    if [ $v -eq 1 ] ; then
+		type=$x ; bpftool cgroup detach $cg $type id $id
+		v=0
+	    fi
+	fi
+    fi
+done
+
+if [ $use_netperf -ne 0 ] ; then
+  if [ "$server" == "" ] ; then
+    if [ "$begNetserverPid" == "" ] ; then
+      netserverPid=`ps ax | grep netserver | grep --invert-match "grep" | awk '{ print $1 }'`
+      if [ "$netserverPid" != "" ] ; then
+        kill $netserverPid
+      fi
+    fi
+  fi
+fi
+exit