sound: Retire OSS

Since no complaints have been raised after disabling the build of OSS
(Open Sound System) by the commit 31cbee6a5611 ("sound: Disable the
build of OSS drivers"), let's finally drop the whole code and
documentation.

Some glue codes are still left intact since sound/oss/dmasound stuff
remains -- which is an independent implementation solely for m68k, and
it's not covered by ALSA yet.

Also, a couple of API header files (linux/sound.h and
linux/soundcard.h) are kept remaining as well, since the OSS API
itself is still supported by ALSA OSS emulation, and applications can
refer to these.

Where we're at it, some help texts in the top-level Kconfig are
adjusted, too (who still needs to specify I/O port in kbuild
nowadays?).

Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>

1 files changed, 0 insertions, 229 deletions

diff --git a/sound/oss/kahlua.c b/sound/oss/kahlua.c
deleted file mode 100644
index c4b0434c7604..000000000000
--- a/sound/oss/kahlua.c
+++ /dev/null
@@ -1,229 +0,0 @@
-/*
- *	Initialisation code for Cyrix/NatSemi VSA1 softaudio
- *
- *	(C) Copyright 2003 Red Hat Inc <alan@lxorguk.ukuu.org.uk>
- *
- * XpressAudio(tm) is used on the Cyrix MediaGX (now NatSemi Geode) systems.
- * The older version (VSA1) provides fairly good soundblaster emulation
- * although there are a couple of bugs: large DMA buffers break record,
- * and the MPU event handling seems suspect. VSA2 allows the native driver
- * to control the AC97 audio engine directly and requires a different driver.
- *
- * Thanks to National Semiconductor for providing the needed information
- * on the XpressAudio(tm) internals.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2, or (at your option) any
- * later version.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- * TO DO:
- *	Investigate whether we can portably support Cognac (5520) in the
- *	same manner.
- */
-
-#include <linux/delay.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/pci.h>
-#include <linux/slab.h>
-
-#include "sound_config.h"
-
-#include "sb.h"
-
-/*
- *	Read a soundblaster compatible mixer register.
- *	In this case we are actually reading an SMI trap
- *	not real hardware.
- */
-
-static u8 mixer_read(unsigned long io, u8 reg)
-{
-	outb(reg, io + 4);
-	udelay(20);
-	reg = inb(io + 5);
-	udelay(20);
-	return reg;
-}
-
-static int probe_one(struct pci_dev *pdev, const struct pci_device_id *ent)
-{
-	struct address_info *hw_config;
-	unsigned long base;
-	void __iomem *mem;
-	unsigned long io;
-	u16 map;
-	u8 irq, dma8, dma16;
-	int oldquiet;
-	extern int sb_be_quiet;
-		
-	base = pci_resource_start(pdev, 0);
-	if(base == 0UL)
-		return 1;
-	
-	mem = ioremap(base, 128);
-	if (!mem)
-		return 1;
-	map = readw(mem + 0x18);	/* Read the SMI enables */
-	iounmap(mem);
-	
-	/* Map bits
-		0:1	* 0x20 + 0x200 = sb base
-		2	sb enable
-		3	adlib enable
-		5	MPU enable 0x330
-		6	MPU enable 0x300
-		
-	   The other bits may be used internally so must be masked */
-
-	io = 0x220 + 0x20 * (map & 3);	   
-	
-	if(map & (1<<2))
-		printk(KERN_INFO "kahlua: XpressAudio at 0x%lx\n", io);
-	else
-		return 1;
-		
-	if(map & (1<<5))
-		printk(KERN_INFO "kahlua: MPU at 0x300\n");
-	else if(map & (1<<6))
-		printk(KERN_INFO "kahlua: MPU at 0x330\n");
-	
-	irq = mixer_read(io, 0x80) & 0x0F;
-	dma8 = mixer_read(io, 0x81);
-
-	// printk("IRQ=%x MAP=%x DMA=%x\n", irq, map, dma8);
-	
-	if(dma8 & 0x20)
-		dma16 = 5;
-	else if(dma8 & 0x40)
-		dma16 = 6;
-	else if(dma8 & 0x80)
-		dma16 = 7;
-	else
-	{
-		printk(KERN_ERR "kahlua: No 16bit DMA enabled.\n");
-		return 1;
-	}
-		
-	if(dma8 & 0x01)
-		dma8 = 0;
-	else if(dma8 & 0x02)
-		dma8 = 1;
-	else if(dma8 & 0x08)
-		dma8 = 3;
-	else
-	{
-		printk(KERN_ERR "kahlua: No 8bit DMA enabled.\n");
-		return 1;
-	}
-	
-	if(irq & 1)
-		irq = 9;
-	else if(irq & 2)
-		irq = 5;
-	else if(irq & 4)
-		irq = 7;
-	else if(irq & 8)
-		irq = 10;
-	else
-	{
-		printk(KERN_ERR "kahlua: SB IRQ not set.\n");
-		return 1;
-	}
-	
-	printk(KERN_INFO "kahlua: XpressAudio on IRQ %d, DMA %d, %d\n",
-		irq, dma8, dma16);
-	
-	hw_config = kzalloc(sizeof(struct address_info), GFP_KERNEL);
-	if(hw_config == NULL)
-	{
-		printk(KERN_ERR "kahlua: out of memory.\n");
-		return 1;
-	}
-	
-	pci_set_drvdata(pdev, hw_config);
-	
-	hw_config->io_base = io;
-	hw_config->irq = irq;
-	hw_config->dma = dma8;
-	hw_config->dma2 = dma16;
-	hw_config->name = "Cyrix XpressAudio";
-	hw_config->driver_use_1 = SB_NO_MIDI | SB_PCI_IRQ;
-
-	if (!request_region(io, 16, "soundblaster"))
-		goto err_out_free;
-	
-	if(sb_dsp_detect(hw_config, 0, 0, NULL)==0)
-	{
-		printk(KERN_ERR "kahlua: audio not responding.\n");
-		release_region(io, 16);
-		goto err_out_free;
-	}
-
-	oldquiet = sb_be_quiet;	
-	sb_be_quiet = 1;
-	if(sb_dsp_init(hw_config, THIS_MODULE))
-	{
-		sb_be_quiet = oldquiet;
-		goto err_out_free;
-	}
-	sb_be_quiet = oldquiet;
-	
-	return 0;
-
-err_out_free:
-	kfree(hw_config);
-	return 1;
-}
-
-static void remove_one(struct pci_dev *pdev)
-{
-	struct address_info *hw_config = pci_get_drvdata(pdev);
-	sb_dsp_unload(hw_config, 0);
-	kfree(hw_config);
-}
-
-MODULE_AUTHOR("Alan Cox");
-MODULE_DESCRIPTION("Kahlua VSA1 PCI Audio");
-MODULE_LICENSE("GPL");
-
-/*
- *	5530 only. The 5510/5520 decode is different.
- */
-
-static const struct pci_device_id id_tbl[] = {
-	{ PCI_VDEVICE(CYRIX, PCI_DEVICE_ID_CYRIX_5530_AUDIO), 0 },
-	{ }
-};
-
-MODULE_DEVICE_TABLE(pci, id_tbl);
-
-static struct pci_driver kahlua_driver = {
-	.name		= "kahlua",
-	.id_table	= id_tbl,
-	.probe		= probe_one,
-	.remove		= remove_one,
-};
-
-
-static int __init kahlua_init_module(void)
-{
-	printk(KERN_INFO "Cyrix Kahlua VSA1 XpressAudio support (c) Copyright 2003 Red Hat Inc\n");
-	return pci_register_driver(&kahlua_driver);
-}
-
-static void kahlua_cleanup_module(void)
-{
-	pci_unregister_driver(&kahlua_driver);
-}
-
-
-module_init(kahlua_init_module);
-module_exit(kahlua_cleanup_module);
-