aboutsummaryrefslogtreecommitdiffstats
path: root/sound/pci
diff options
context:
space:
mode:
authorConnor McAdams <conmanx360@gmail.com>2018-05-08 13:20:04 -0400
committerTakashi Iwai <tiwai@suse.de>2018-05-13 09:29:27 +0200
commit2e48b2b7a29e391a61137d00ea1aa2a1623ba728 (patch)
treec6e270b765412d4f85c016aa8ea95848d6515cdb /sound/pci
parentALSA: hda/ca0132: Add PCI region2 iomap for SBZ (diff)
downloadlinux-dev-2e48b2b7a29e391a61137d00ea1aa2a1623ba728.tar.xz
linux-dev-2e48b2b7a29e391a61137d00ea1aa2a1623ba728.zip
ALSA: hda/ca0132: Add extra exit functions for R3Di and SBZ
This patch adds extra functions for shutdown on the Sound Blaster Z and Recon3Di. The Recon3Di only has one specific functions, which sets the GPIO data pins to 0 to prevent a popping noise. The Sound Blaster Z exit sequence was taken from Windows. Without this exit function, the card will not reload properly unless the PC has been shutdown to clear the onboard memory. There are commented out functions currently in the sbz_exit_chip function that are added in a later patch. Also, a reboot notify function has been added, to make sure these functions are ran before a reboot. This helps when using the card through VFIO in a virtual machine, to make sure the card reloads the DSP properly. Signed-off-by: Connor McAdams <conmanx360@gmail.com> Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp> Signed-off-by: Takashi Iwai <tiwai@suse.de>
Diffstat (limited to 'sound/pci')
-rw-r--r--sound/pci/hda/patch_ca0132.c131
1 files changed, 129 insertions, 2 deletions
diff --git a/sound/pci/hda/patch_ca0132.c b/sound/pci/hda/patch_ca0132.c
index 29772831e412..fdce46d37df7 100644
--- a/sound/pci/hda/patch_ca0132.c
+++ b/sound/pci/hda/patch_ca0132.c
@@ -4645,6 +4645,115 @@ static void ca0132_init_chip(struct hda_codec *codec)
#endif
}
+/*
+ * Recon3Di exit specific commands.
+ */
+/* prevents popping noise on shutdown */
+static void r3di_gpio_shutdown(struct hda_codec *codec)
+{
+ snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA, 0x00);
+}
+
+/*
+ * Sound Blaster Z exit specific commands.
+ */
+static void sbz_region2_exit(struct hda_codec *codec)
+{
+ struct ca0132_spec *spec = codec->spec;
+ unsigned int i;
+
+ for (i = 0; i < 4; i++)
+ writeb(0x0, spec->mem_base + 0x100);
+ for (i = 0; i < 8; i++)
+ writeb(0xb3, spec->mem_base + 0x304);
+ /*
+ * I believe these are GPIO, with the right most hex digit being the
+ * gpio pin, and the second digit being on or off. We see this more in
+ * the input/output select functions.
+ */
+ writew(0x0000, spec->mem_base + 0x320);
+ writew(0x0001, spec->mem_base + 0x320);
+ writew(0x0104, spec->mem_base + 0x320);
+ writew(0x0005, spec->mem_base + 0x320);
+ writew(0x0007, spec->mem_base + 0x320);
+}
+
+static void sbz_set_pin_ctl_default(struct hda_codec *codec)
+{
+ hda_nid_t pins[5] = {0x0B, 0x0C, 0x0E, 0x12, 0x13};
+ unsigned int i;
+
+ snd_hda_codec_write(codec, 0x11, 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x40);
+
+ for (i = 0; i < 5; i++)
+ snd_hda_codec_write(codec, pins[i], 0,
+ AC_VERB_SET_PIN_WIDGET_CONTROL, 0x00);
+}
+
+static void sbz_clear_unsolicited(struct hda_codec *codec)
+{
+ hda_nid_t pins[7] = {0x0B, 0x0E, 0x0F, 0x10, 0x11, 0x12, 0x13};
+ unsigned int i;
+
+ for (i = 0; i < 7; i++) {
+ snd_hda_codec_write(codec, pins[i], 0,
+ AC_VERB_SET_UNSOLICITED_ENABLE, 0x00);
+ }
+}
+
+/* On shutdown, sends commands in sets of three */
+static void sbz_gpio_shutdown_commands(struct hda_codec *codec, int dir,
+ int mask, int data)
+{
+ if (dir >= 0)
+ snd_hda_codec_write(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_DIRECTION, dir);
+ if (mask >= 0)
+ snd_hda_codec_write(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_MASK, mask);
+
+ if (data >= 0)
+ snd_hda_codec_write(codec, 0x01, 0,
+ AC_VERB_SET_GPIO_DATA, data);
+}
+
+static void sbz_exit_chip(struct hda_codec *codec)
+{
+
+ /* Mess with GPIO */
+ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, -1);
+ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x05);
+ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x01);
+
+
+ chipio_set_conn_rate(codec, 0x41, SR_192_000);
+ chipio_set_conn_rate(codec, 0x91, SR_192_000);
+
+ chipio_write(codec, 0x18a020, 0x00000083);
+
+ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x03);
+ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x07);
+ sbz_gpio_shutdown_commands(codec, 0x07, 0x07, 0x06);
+
+
+ chipio_set_control_param(codec, 0x0D, 0x24);
+
+ sbz_clear_unsolicited(codec);
+ sbz_set_pin_ctl_default(codec);
+
+ snd_hda_codec_write(codec, 0x0B, 0,
+ AC_VERB_SET_EAPD_BTLENABLE, 0x00);
+
+ if (dspload_is_loaded(codec))
+ dsp_reset(codec);
+
+ snd_hda_codec_write(codec, WIDGET_CHIP_CTRL, 0,
+ VENDOR_CHIPIO_CT_EXTENSIONS_ENABLE, 0x00);
+
+ sbz_region2_exit(codec);
+}
+
static void ca0132_exit_chip(struct hda_codec *codec)
{
/* put any chip cleanup stuffs here. */
@@ -4705,8 +4814,20 @@ static void ca0132_free(struct hda_codec *codec)
cancel_delayed_work_sync(&spec->unsol_hp_work);
snd_hda_power_up(codec);
- snd_hda_sequence_write(codec, spec->base_exit_verbs);
- ca0132_exit_chip(codec);
+ switch (spec->quirk) {
+ case QUIRK_SBZ:
+ sbz_exit_chip(codec);
+ break;
+ case QUIRK_R3DI:
+ r3di_gpio_shutdown(codec);
+ snd_hda_sequence_write(codec, spec->base_exit_verbs);
+ ca0132_exit_chip(codec);
+ break;
+ default:
+ snd_hda_sequence_write(codec, spec->base_exit_verbs);
+ ca0132_exit_chip(codec);
+ break;
+ }
snd_hda_power_down(codec);
if (spec->mem_base)
iounmap(spec->mem_base);
@@ -4714,12 +4835,18 @@ static void ca0132_free(struct hda_codec *codec)
kfree(codec->spec);
}
+static void ca0132_reboot_notify(struct hda_codec *codec)
+{
+ codec->patch_ops.free(codec);
+}
+
static const struct hda_codec_ops ca0132_patch_ops = {
.build_controls = ca0132_build_controls,
.build_pcms = ca0132_build_pcms,
.init = ca0132_init,
.free = ca0132_free,
.unsol_event = snd_hda_jack_unsol_event,
+ .reboot_notify = ca0132_reboot_notify,
};
static void ca0132_config(struct hda_codec *codec)