ASoC: fsl_spdif: Add new registers included on i.MX8ULP

There are some new registers added on i.MX8ULP, they are
the SPDIF transmit Professional C channel registers,
192bit SPDIF receive C channel registers, and 192bit SPDIF
transmit C channel registers.

There are two output lines, SPDIF_OUT1 and SPDIF_OUT2, the
original REG_SPDIF_STCSCH and REG_SPDIF_STCSCL are used for
SPDIF_OUT1, the new REG_SPDIF_STCSPH and REG_SPDIF_STCSPL
are used for SPDIF_OUT2, the 192bit SPDIF C channel registers
are used for both.

Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1647408538-2982-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 51 insertions, 1 deletions

diff --git a/sound/soc/fsl/fsl_spdif.c b/sound/soc/fsl/fsl_spdif.c
index b502e7c3c04d..42d11aca38a1 100644
--- a/sound/soc/fsl/fsl_spdif.c
+++ b/sound/soc/fsl/fsl_spdif.c
@@ -50,6 +50,7 @@ static u8 srpc_dpll_locked[] = { 0x0, 0x1, 0x2, 0x3, 0x4, 0xa, 0xb };
  * @shared_root_clock: flag of sharing a clock source with others;
  *                     so the driver shouldn't set root clock rate
  * @raw_capture_mode: if raw capture mode support
+ * @cchannel_192b: if there are registers for 192bits C channel data
  * @interrupts: interrupt number
  * @tx_burst: tx maxburst size
  * @rx_burst: rx maxburst size
@@ -59,6 +60,7 @@ struct fsl_spdif_soc_data {
 	bool imx;
 	bool shared_root_clock;
 	bool raw_capture_mode;
+	bool cchannel_192b;
 	u32 interrupts;
 	u32 tx_burst;
 	u32 rx_burst;
@@ -196,6 +198,7 @@ static struct fsl_spdif_soc_data fsl_spdif_imx8ulp = {
 	.tx_burst = 2,		/* Applied for EDMA */
 	.rx_burst = 2,		/* Applied for EDMA */
 	.tx_formats = SNDRV_PCM_FMTBIT_S24_LE,	/* Applied for EDMA */
+	.cchannel_192b = true,
 };
 
 /* Check if clk is a root clock that does not share clock source with others */
@@ -441,6 +444,23 @@ static void spdif_write_channel_status(struct fsl_spdif_priv *spdif_priv)
 	regmap_write(regmap, REG_SPDIF_STCSCL, ch_status);
 
 	dev_dbg(&pdev->dev, "STCSCL: 0x%06x\n", ch_status);
+
+	if (spdif_priv->soc->cchannel_192b) {
+		ch_status = (bitrev8(ctrl->ch_status[0]) << 24) |
+			    (bitrev8(ctrl->ch_status[1]) << 16) |
+			    (bitrev8(ctrl->ch_status[2]) << 8) |
+			    bitrev8(ctrl->ch_status[3]);
+
+		regmap_update_bits(regmap, REG_SPDIF_SCR, 0x1000000, 0x1000000);
+
+		/*
+		 * The first 32bit should be in REG_SPDIF_STCCA_31_0 register,
+		 * but here we need to set REG_SPDIF_STCCA_191_160 on 8ULP
+		 * then can get correct result with HDMI analyzer capture.
+		 * There is a hardware bug here.
+		 */
+		regmap_write(regmap, REG_SPDIF_STCCA_191_160, ch_status);
+	}
 }
 
 /* Set SPDIF PhaseConfig register for rx clock */
@@ -1229,6 +1249,8 @@ static const struct reg_default fsl_spdif_reg_defaults[] = {
 	{REG_SPDIF_STR,	   0x00000000},
 	{REG_SPDIF_STCSCH, 0x00000000},
 	{REG_SPDIF_STCSCL, 0x00000000},
+	{REG_SPDIF_STCSPH, 0x00000000},
+	{REG_SPDIF_STCSPL, 0x00000000},
 	{REG_SPDIF_STC,	   0x00020f00},
 };
 
@@ -1248,8 +1270,22 @@ static bool fsl_spdif_readable_reg(struct device *dev, unsigned int reg)
 	case REG_SPDIF_SRQ:
 	case REG_SPDIF_STCSCH:
 	case REG_SPDIF_STCSCL:
+	case REG_SPDIF_STCSPH:
+	case REG_SPDIF_STCSPL:
 	case REG_SPDIF_SRFM:
 	case REG_SPDIF_STC:
+	case REG_SPDIF_SRCCA_31_0:
+	case REG_SPDIF_SRCCA_63_32:
+	case REG_SPDIF_SRCCA_95_64:
+	case REG_SPDIF_SRCCA_127_96:
+	case REG_SPDIF_SRCCA_159_128:
+	case REG_SPDIF_SRCCA_191_160:
+	case REG_SPDIF_STCCA_31_0:
+	case REG_SPDIF_STCCA_63_32:
+	case REG_SPDIF_STCCA_95_64:
+	case REG_SPDIF_STCCA_127_96:
+	case REG_SPDIF_STCCA_159_128:
+	case REG_SPDIF_STCCA_191_160:
 		return true;
 	default:
 		return false;
@@ -1268,6 +1304,12 @@ static bool fsl_spdif_volatile_reg(struct device *dev, unsigned int reg)
 	case REG_SPDIF_SRU:
 	case REG_SPDIF_SRQ:
 	case REG_SPDIF_SRFM:
+	case REG_SPDIF_SRCCA_31_0:
+	case REG_SPDIF_SRCCA_63_32:
+	case REG_SPDIF_SRCCA_95_64:
+	case REG_SPDIF_SRCCA_127_96:
+	case REG_SPDIF_SRCCA_159_128:
+	case REG_SPDIF_SRCCA_191_160:
 		return true;
 	default:
 		return false;
@@ -1286,7 +1328,15 @@ static bool fsl_spdif_writeable_reg(struct device *dev, unsigned int reg)
 	case REG_SPDIF_STR:
 	case REG_SPDIF_STCSCH:
 	case REG_SPDIF_STCSCL:
+	case REG_SPDIF_STCSPH:
+	case REG_SPDIF_STCSPL:
 	case REG_SPDIF_STC:
+	case REG_SPDIF_STCCA_31_0:
+	case REG_SPDIF_STCCA_63_32:
+	case REG_SPDIF_STCCA_95_64:
+	case REG_SPDIF_STCCA_127_96:
+	case REG_SPDIF_STCCA_159_128:
+	case REG_SPDIF_STCCA_191_160:
 		return true;
 	default:
 		return false;
@@ -1298,7 +1348,7 @@ static const struct regmap_config fsl_spdif_regmap_config = {
 	.reg_stride = 4,
 	.val_bits = 32,
 
-	.max_register = REG_SPDIF_STC,
+	.max_register = REG_SPDIF_STCCA_191_160,
 	.reg_defaults = fsl_spdif_reg_defaults,
 	.num_reg_defaults = ARRAY_SIZE(fsl_spdif_reg_defaults),
 	.readable_reg = fsl_spdif_readable_reg,