Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from David Miller:

 1) Support 6Ghz band in ath11k driver, from Rajkumar Manoharan.

 2) Support UDP segmentation in code TSO code, from Eric Dumazet.

 3) Allow flashing different flash images in cxgb4 driver, from Vishal
    Kulkarni.

 4) Add drop frames counter and flow status to tc flower offloading,
    from Po Liu.

 5) Support n-tuple filters in cxgb4, from Vishal Kulkarni.

 6) Various new indirect call avoidance, from Eric Dumazet and Brian
    Vazquez.

 7) Fix BPF verifier failures on 32-bit pointer arithmetic, from
    Yonghong Song.

 8) Support querying and setting hardware address of a port function via
    devlink, use this in mlx5, from Parav Pandit.

 9) Support hw ipsec offload on bonding slaves, from Jarod Wilson.

10) Switch qca8k driver over to phylink, from Jonathan McDowell.

11) In bpftool, show list of processes holding BPF FD references to
    maps, programs, links, and btf objects. From Andrii Nakryiko.

12) Several conversions over to generic power management, from Vaibhav
    Gupta.

13) Add support for SO_KEEPALIVE et al. to bpf_setsockopt(), from Dmitry
    Yakunin.

14) Various https url conversions, from Alexander A. Klimov.

15) Timestamping and PHC support for mscc PHY driver, from Antoine
    Tenart.

16) Support bpf iterating over tcp and udp sockets, from Yonghong Song.

17) Support 5GBASE-T i40e NICs, from Aleksandr Loktionov.

18) Add kTLS RX HW offload support to mlx5e, from Tariq Toukan.

19) Fix the ->ndo_start_xmit() return type to be netdev_tx_t in several
    drivers. From Luc Van Oostenryck.

20) XDP support for xen-netfront, from Denis Kirjanov.

21) Support receive buffer autotuning in MPTCP, from Florian Westphal.

22) Support EF100 chip in sfc driver, from Edward Cree.

23) Add XDP support to mvpp2 driver, from Matteo Croce.

24) Support MPTCP in sock_diag, from Paolo Abeni.

25) Commonize UDP tunnel offloading code by creating udp_tunnel_nic
    infrastructure, from Jakub Kicinski.

26) Several pci_ --> dma_ API conversions, from Christophe JAILLET.

27) Add FLOW_ACTION_POLICE support to mlxsw, from Ido Schimmel.

28) Add SK_LOOKUP bpf program type, from Jakub Sitnicki.

29) Refactor a lot of networking socket option handling code in order to
    avoid set_fs() calls, from Christoph Hellwig.

30) Add rfc4884 support to icmp code, from Willem de Bruijn.

31) Support TBF offload in dpaa2-eth driver, from Ioana Ciornei.

32) Support XDP_REDIRECT in qede driver, from Alexander Lobakin.

33) Support PCI relaxed ordering in mlx5 driver, from Aya Levin.

34) Support TCP syncookies in MPTCP, from Flowian Westphal.

35) Fix several tricky cases of PMTU handling wrt. briding, from Stefano
    Brivio.

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2056 commits)
  net: thunderx: initialize VF's mailbox mutex before first usage
  usb: hso: remove bogus check for EINPROGRESS
  usb: hso: no complaint about kmalloc failure
  hso: fix bailout in error case of probe
  ip_tunnel_core: Fix build for archs without _HAVE_ARCH_IPV6_CSUM
  selftests/net: relax cpu affinity requirement in msg_zerocopy test
  mptcp: be careful on subflow creation
  selftests: rtnetlink: make kci_test_encap() return sub-test result
  selftests: rtnetlink: correct the final return value for the test
  net: dsa: sja1105: use detected device id instead of DT one on mismatch
  tipc: set ub->ifindex for local ipv6 address
  ipv6: add ipv6_dev_find()
  net: openvswitch: silence suspicious RCU usage warning
  Revert "vxlan: fix tos value before xmit"
  ptp: only allow phase values lower than 1 period
  farsync: switch from 'pci_' to 'dma_' API
  wan: wanxl: switch from 'pci_' to 'dma_' API
  hv_netvsc: do not use VF device if link is down
  dpaa2-eth: Fix passing zero to 'PTR_ERR' warning
  net: macb: Properly handle phylink on at91sam9x
  ...

1 files changed, 492 insertions, 0 deletions

diff --git a/tools/testing/selftests/net/forwarding/sch_red.sh b/tools/testing/selftests/net/forwarding/sch_red.sh
new file mode 100755
index 000000000000..e714bae473fb
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/sch_red.sh
@@ -0,0 +1,492 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# This test sends one stream of traffic from H1 through a TBF shaper, to a RED
+# within TBF shaper on $swp3. The two shapers have the same configuration, and
+# thus the resulting stream should fill all available bandwidth on the latter
+# shaper. A second stream is sent from H2 also via $swp3, and used to inject
+# additional traffic. Since all available bandwidth is taken, this traffic has
+# to go to backlog.
+#
+# +--------------------------+                     +--------------------------+
+# | H1                       |                     | H2                       |
+# |     + $h1                |                     |     + $h2                |
+# |     | 192.0.2.1/28       |                     |     | 192.0.2.2/28       |
+# |     | TBF 10Mbps         |                     |     |                    |
+# +-----|--------------------+                     +-----|--------------------+
+#       |                                                |
+# +-----|------------------------------------------------|--------------------+
+# | SW  |                                                |                    |
+# |  +--|------------------------------------------------|----------------+   |
+# |  |  + $swp1                                          + $swp2          |   |
+# |  |                               BR                                   |   |
+# |  |                                                                    |   |
+# |  |                                + $swp3                             |   |
+# |  |                                | TBF 10Mbps / RED                  |   |
+# |  +--------------------------------|-----------------------------------+   |
+# |                                   |                                       |
+# +-----------------------------------|---------------------------------------+
+#                                     |
+#                               +-----|--------------------+
+#			        | H3  |                    |
+#			        |     + $h1                |
+#			        |       192.0.2.3/28       |
+#			        |                          |
+#			        +--------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	ecn_test
+	ecn_nodrop_test
+	red_test
+	red_qevent_test
+	ecn_qevent_test
+"
+
+NUM_NETIFS=6
+CHECK_TC="yes"
+source lib.sh
+
+BACKLOG=30000
+PKTSZ=1400
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28
+	mtu_set $h1 10000
+	tc qdisc replace dev $h1 root handle 1: tbf \
+	   rate 10Mbit burst 10K limit 1M
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 root
+	mtu_restore $h1
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	mtu_set $h2 10000
+}
+
+h2_destroy()
+{
+	mtu_restore $h2
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.3/28
+	mtu_set $h3 10000
+}
+
+h3_destroy()
+{
+	mtu_restore $h3
+	simple_if_fini $h3 192.0.2.3/28
+}
+
+switch_create()
+{
+	ip link add dev br up type bridge
+	ip link set dev $swp1 up master br
+	ip link set dev $swp2 up master br
+	ip link set dev $swp3 up master br
+
+	mtu_set $swp1 10000
+	mtu_set $swp2 10000
+	mtu_set $swp3 10000
+
+	tc qdisc replace dev $swp3 root handle 1: tbf \
+	   rate 10Mbit burst 10K limit 1M
+	ip link add name _drop_test up type dummy
+}
+
+switch_destroy()
+{
+	ip link del dev _drop_test
+	tc qdisc del dev $swp3 root
+
+	mtu_restore $h3
+	mtu_restore $h2
+	mtu_restore $h1
+
+	ip link set dev $swp3 down nomaster
+	ip link set dev $swp2 down nomaster
+	ip link set dev $swp1 down nomaster
+	ip link del dev br
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	h2=${NETIFS[p3]}
+	swp2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	h3_mac=$(mac_get $h3)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.3 " from host 1"
+	ping_test $h2 192.0.2.3 " from host 2"
+}
+
+get_qdisc_backlog()
+{
+	qdisc_stats_get $swp3 11: .backlog
+}
+
+get_nmarked()
+{
+	qdisc_stats_get $swp3 11: .marked
+}
+
+get_qdisc_npackets()
+{
+	qdisc_stats_get $swp3 11: .packets
+}
+
+get_nmirrored()
+{
+	link_stats_get _drop_test tx packets
+}
+
+send_packets()
+{
+	local proto=$1; shift
+	local pkts=$1; shift
+
+	$MZ $h2 -p $PKTSZ -a own -b $h3_mac -A 192.0.2.2 -B 192.0.2.3 -t $proto -q -c $pkts "$@"
+}
+
+# This sends traffic in an attempt to build a backlog of $size. Returns 0 on
+# success. After 10 failed attempts it bails out and returns 1. It dumps the
+# backlog size to stdout.
+build_backlog()
+{
+	local size=$1; shift
+	local proto=$1; shift
+
+	local i=0
+
+	while :; do
+		local cur=$(get_qdisc_backlog)
+		local diff=$((size - cur))
+		local pkts=$(((diff + PKTSZ - 1) / PKTSZ))
+
+		if ((cur >= size)); then
+			echo $cur
+			return 0
+		elif ((i++ > 10)); then
+			echo $cur
+			return 1
+		fi
+
+		send_packets $proto $pkts "$@"
+		sleep 1
+	done
+}
+
+check_marking()
+{
+	local cond=$1; shift
+
+	local npackets_0=$(get_qdisc_npackets)
+	local nmarked_0=$(get_nmarked)
+	sleep 5
+	local npackets_1=$(get_qdisc_npackets)
+	local nmarked_1=$(get_nmarked)
+
+	local nmarked_d=$((nmarked_1 - nmarked_0))
+	local npackets_d=$((npackets_1 - npackets_0))
+	local pct=$((100 * nmarked_d / npackets_d))
+
+	echo $pct
+	((pct $cond))
+}
+
+check_mirroring()
+{
+	local cond=$1; shift
+
+	local npackets_0=$(get_qdisc_npackets)
+	local nmirrored_0=$(get_nmirrored)
+	sleep 5
+	local npackets_1=$(get_qdisc_npackets)
+	local nmirrored_1=$(get_nmirrored)
+
+	local nmirrored_d=$((nmirrored_1 - nmirrored_0))
+	local npackets_d=$((npackets_1 - npackets_0))
+	local pct=$((100 * nmirrored_d / npackets_d))
+
+	echo $pct
+	((pct $cond))
+}
+
+ecn_test_common()
+{
+	local name=$1; shift
+	local limit=$1; shift
+	local backlog
+	local pct
+
+	# Build the below-the-limit backlog using UDP. We could use TCP just
+	# fine, but this way we get a proof that UDP is accepted when queue
+	# length is below the limit. The main stream is using TCP, and if the
+	# limit is misconfigured, we would see this traffic being ECN marked.
+	RET=0
+	backlog=$(build_backlog $((2 * limit / 3)) udp)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "$name backlog < limit"
+
+	# Now push TCP, because non-TCP traffic would be early-dropped after the
+	# backlog crosses the limit, and we want to make sure that the backlog
+	# is above the limit.
+	RET=0
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking ">= 95")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected >= 95."
+	log_test "$name backlog > limit"
+}
+
+do_ecn_test()
+{
+	local limit=$1; shift
+	local name=ECN
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	ecn_test_common "$name" $limit
+
+	# Up there we saw that UDP gets accepted when backlog is below the
+	# limit. Now that it is above, it should all get dropped, and backlog
+	# building should fail.
+	RET=0
+	build_backlog $((2 * limit)) udp >/dev/null
+	check_fail $? "UDP traffic went into backlog instead of being early-dropped"
+	log_test "$name backlog > limit: UDP early-dropped"
+
+	stop_traffic
+	sleep 1
+}
+
+do_ecn_nodrop_test()
+{
+	local limit=$1; shift
+	local name="ECN nodrop"
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	ecn_test_common "$name" $limit
+
+	# Up there we saw that UDP gets accepted when backlog is below the
+	# limit. Now that it is above, in nodrop mode, make sure it goes to
+	# backlog as well.
+	RET=0
+	build_backlog $((2 * limit)) udp >/dev/null
+	check_err $? "UDP traffic was early-dropped instead of getting into backlog"
+	log_test "$name backlog > limit: UDP not dropped"
+
+	stop_traffic
+	sleep 1
+}
+
+do_red_test()
+{
+	local limit=$1; shift
+	local backlog
+	local pct
+
+	# Use ECN-capable TCP to verify there's no marking even though the queue
+	# is above limit.
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+
+	# Pushing below the queue limit should work.
+	RET=0
+	backlog=$(build_backlog $((2 * limit / 3)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "RED backlog < limit"
+
+	# Pushing above should not.
+	RET=0
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_fail $? "Traffic went into backlog instead of being early-dropped"
+	pct=$(check_marking "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% marked packets, expected == 0."
+	log_test "RED backlog > limit"
+
+	stop_traffic
+	sleep 1
+}
+
+do_red_qevent_test()
+{
+	local limit=$1; shift
+	local backlog
+	local base
+	local now
+	local pct
+
+	RET=0
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t udp -q &
+	sleep 1
+
+	tc filter add block 10 pref 1234 handle 102 matchall skip_hw \
+	   action mirred egress mirror dev _drop_test
+
+	# Push to the queue until it's at the limit. The configured limit is
+	# rounded by the qdisc, so this is the best we can do to get to the real
+	# limit.
+	build_backlog $((3 * limit / 2)) udp >/dev/null
+
+	base=$(get_nmirrored)
+	send_packets udp 100
+	sleep 1
+	now=$(get_nmirrored)
+	((now >= base + 100))
+	check_err $? "Dropped packets not observed: 100 expected, $((now - base)) seen"
+
+	tc filter del block 10 pref 1234 handle 102 matchall
+
+	base=$(get_nmirrored)
+	send_packets udp 100
+	sleep 1
+	now=$(get_nmirrored)
+	((now == base))
+	check_err $? "Dropped packets still observed: 0 expected, $((now - base)) seen"
+
+	log_test "RED early_dropped packets mirrored"
+
+	stop_traffic
+	sleep 1
+}
+
+do_ecn_qevent_test()
+{
+	local limit=$1; shift
+	local name=ECN
+
+	RET=0
+
+	$MZ $h1 -p $PKTSZ -A 192.0.2.1 -B 192.0.2.3 -c 0 \
+		-a own -b $h3_mac -t tcp -q tos=0x01 &
+	sleep 1
+
+	tc filter add block 10 pref 1234 handle 102 matchall skip_hw \
+	   action mirred egress mirror dev _drop_test
+
+	backlog=$(build_backlog $((2 * limit / 3)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_mirroring "== 0")
+	check_err $? "backlog $backlog / $limit Got $pct% mirrored packets, expected == 0."
+
+	backlog=$(build_backlog $((3 * limit / 2)) tcp tos=0x01)
+	check_err $? "Could not build the requested backlog"
+	pct=$(check_mirroring ">= 95")
+	check_err $? "backlog $backlog / $limit Got $pct% mirrored packets, expected >= 95."
+
+	tc filter del block 10 pref 1234 handle 102 matchall
+
+	log_test "ECN marked packets mirrored"
+
+	stop_traffic
+	sleep 1
+}
+
+install_qdisc()
+{
+	local -a args=("$@")
+
+	tc qdisc replace dev $swp3 parent 1:1 handle 11: red \
+	   limit 1M avpkt $PKTSZ probability 1 \
+	   min $BACKLOG max $((BACKLOG + 1)) burst 38 "${args[@]}"
+	sleep 1
+}
+
+uninstall_qdisc()
+{
+	tc qdisc del dev $swp3 parent 1:1
+}
+
+ecn_test()
+{
+	install_qdisc ecn
+	do_ecn_test $BACKLOG
+	uninstall_qdisc
+}
+
+ecn_nodrop_test()
+{
+	install_qdisc ecn nodrop
+	do_ecn_nodrop_test $BACKLOG
+	uninstall_qdisc
+}
+
+red_test()
+{
+	install_qdisc
+	do_red_test $BACKLOG
+	uninstall_qdisc
+}
+
+red_qevent_test()
+{
+	install_qdisc qevent early_drop block 10
+	do_red_qevent_test $BACKLOG
+	uninstall_qdisc
+}
+
+ecn_qevent_test()
+{
+	install_qdisc ecn qevent mark block 10
+	do_ecn_qevent_test $BACKLOG
+	uninstall_qdisc
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS