Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

Pull networking fixes from David Miller:
 "Another batch of fixes:

  1) Remove nft_compat counter flush optimization, it generates warnings
     from the refcount infrastructure. From Florian Westphal.

  2) Fix BPF to search for build id more robustly, from Jiri Olsa.

  3) Handle bogus getopt lengths in ebtables, from Florian Westphal.

  4) Infoleak and other fixes to j1939 CAN driver, from Eric Dumazet and
     Oleksij Rempel.

  5) Reset iter properly on mptcp sendmsg() error, from Florian
     Westphal.

  6) Show a saner speed in bonding broadcast mode, from Jarod Wilson.

  7) Various kerneldoc fixes in bonding and elsewhere, from Lee Jones.

  8) Fix double unregister in bonding during namespace tear down, from
     Cong Wang.

  9) Disable RP filter during icmp_redirect selftest, from David Ahern"

* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (75 commits)
  otx2_common: Use devm_kcalloc() in otx2_config_npa()
  net: qrtr: fix usage of idr in port assignment to socket
  selftests: disable rp_filter for icmp_redirect.sh
  Revert "net: xdp: pull ethernet header off packet after computing skb->protocol"
  phylink: <linux/phylink.h>: fix function prototype kernel-doc warning
  mptcp: sendmsg: reset iter on error redux
  net: devlink: Remove overzealous WARN_ON with snapshots
  tipc: not enable tipc when ipv6 works as a module
  tipc: fix uninit skb->data in tipc_nl_compat_dumpit()
  net: Fix potential wrong skb->protocol in skb_vlan_untag()
  net: xdp: pull ethernet header off packet after computing skb->protocol
  ipvlan: fix device features
  bonding: fix a potential double-unregister
  can: j1939: add rxtimer for multipacket broadcast session
  can: j1939: abort multipacket broadcast session when timeout occurs
  can: j1939: cancel rxtimer on multipacket broadcast session complete
  can: j1939: fix support for multipacket broadcast message
  net: fddi: skfp: cfm: Remove seemingly unused variable 'ID_sccs'
  net: fddi: skfp: cfm: Remove set but unused variable 'oldstate'
  net: fddi: skfp: smt: Remove seemingly unused variable 'ID_sccs'
  ...

1 files changed, 43 insertions, 30 deletions

diff --git a/tools/testing/selftests/netfilter/nft_flowtable.sh b/tools/testing/selftests/netfilter/nft_flowtable.sh
index d3e0809ab368..a47d1d832210 100755
--- a/tools/testing/selftests/netfilter/nft_flowtable.sh
+++ b/tools/testing/selftests/netfilter/nft_flowtable.sh
@@ -2,13 +2,18 @@
 # SPDX-License-Identifier: GPL-2.0
 #
 # This tests basic flowtable functionality.
-# Creates following topology:
+# Creates following default topology:
 #
 # Originator (MTU 9000) <-Router1-> MTU 1500 <-Router2-> Responder (MTU 2000)
 # Router1 is the one doing flow offloading, Router2 has no special
 # purpose other than having a link that is smaller than either Originator
 # and responder, i.e. TCPMSS announced values are too large and will still
 # result in fragmentation and/or PMTU discovery.
+#
+# You can check with different Orgininator/Link/Responder MTU eg:
+# sh nft_flowtable.sh -o1000 -l500 -r100
+#
+
 
 # Kselftest framework requirement - SKIP code is 4.
 ksft_skip=4
@@ -21,29 +26,18 @@ ns2out=""
 
 log_netns=$(sysctl -n net.netfilter.nf_log_all_netns)
 
-nft --version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nft tool"
-	exit $ksft_skip
-fi
-
-ip -Version > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without ip tool"
-	exit $ksft_skip
-fi
-
-which nc > /dev/null 2>&1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not run test without nc (netcat)"
-	exit $ksft_skip
-fi
+checktool (){
+	$1 > /dev/null 2>&1
+	if [ $? -ne 0 ];then
+		echo "SKIP: Could not $2"
+		exit $ksft_skip
+	fi
+}
 
-ip netns add nsr1
-if [ $? -ne 0 ];then
-	echo "SKIP: Could not create net namespace"
-	exit $ksft_skip
-fi
+checktool "nft --version" "run test without nft tool"
+checktool "ip -Version" "run test without ip tool"
+checktool "which nc" "run test without nc (netcat)"
+checktool "ip netns add nsr1" "create net namespace"
 
 ip netns add ns1
 ip netns add ns2
@@ -89,11 +83,24 @@ ip -net nsr2 addr add dead:2::1/64 dev veth1
 # ns2 is going via nsr2 with a smaller mtu, so that TCPMSS announced by both peers
 # is NOT the lowest link mtu.
 
-ip -net nsr1 link set veth0 mtu 9000
-ip -net ns1 link set eth0 mtu 9000
+omtu=9000
+lmtu=1500
+rmtu=2000
+
+while getopts "o:l:r:" o
+do
+	case $o in
+		o) omtu=$OPTARG;;
+		l) lmtu=$OPTARG;;
+		r) rmtu=$OPTARG;;
+	esac
+done
+
+ip -net nsr1 link set veth0 mtu $omtu
+ip -net ns1 link set eth0 mtu $omtu
 
-ip -net nsr2 link set veth1 mtu 2000
-ip -net ns2 link set eth0 mtu 2000
+ip -net nsr2 link set veth1 mtu $rmtu
+ip -net ns2 link set eth0 mtu $rmtu
 
 # transfer-net between nsr1 and nsr2.
 # these addresses are not used for connections.
@@ -147,7 +154,7 @@ table inet filter {
       # as PMTUd is off.
       # This rule is deleted for the last test, when we expect PMTUd
       # to kick in and ensure all packets meet mtu requirements.
-      meta length gt 1500 accept comment something-to-grep-for
+      meta length gt $lmtu accept comment something-to-grep-for
 
       # next line blocks connection w.o. working offload.
       # we only do this for reverse dir, because we expect packets to
@@ -243,8 +250,14 @@ test_tcp_forwarding_ip()
 
 	sleep 3
 
-	kill $lpid
-	kill $cpid
+	if ps -p $lpid > /dev/null;then
+		kill $lpid
+	fi
+
+	if ps -p $cpid > /dev/null;then
+		kill $cpid
+	fi
+
 	wait
 
 	check_transfer "$ns1in" "$ns2out" "ns1 -> ns2"