Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller: "Highlights: - Gustavo A. R. Silva keeps working on the implicit switch fallthru changes. - Support 802.11ax High-Efficiency wireless in cfg80211 et al, From Luca Coelho. - Re-enable ASPM in r8169, from Kai-Heng Feng. - Add virtual XFRM interfaces, which avoids all of the limitations of existing IPSEC tunnels. From Steffen Klassert. - Convert GRO over to use a hash table, so that when we have many flows active we don't traverse a long list during accumluation. - Many new self tests for routing, TC, tunnels, etc. Too many contributors to mention them all, but I'm really happy to keep seeing this stuff. - Hardware timestamping support for dpaa_eth/fsl-fman from Yangbo Lu. - Lots of cleanups and fixes in L2TP code from Guillaume Nault. - Add IPSEC offload support to netdevsim, from Shannon Nelson. - Add support for slotting with non-uniform distribution to netem packet scheduler, from Yousuk Seung. - Add UDP GSO support to mlx5e, from Boris Pismenny. - Support offloading of Team LAG in NFP, from John Hurley. - Allow to configure TX queue selection based upon RX queue, from Amritha Nambiar. - Support ethtool ring size configuration in aquantia, from Anton Mikaev. - Support DSCP and flowlabel per-transport in SCTP, from Xin Long. - Support list based batching and stack traversal of SKBs, this is very exciting work. From Edward Cree. - Busyloop optimizations in vhost_net, from Toshiaki Makita. - Introduce the ETF qdisc, which allows time based transmissions. IGB can offload this in hardware. From Vinicius Costa Gomes. - Add parameter support to devlink, from Moshe Shemesh. - Several multiplication and division optimizations for BPF JIT in nfp driver, from Jiong Wang. - Lots of prepatory work to make more of the packet scheduler layer lockless, when possible, from Vlad Buslov. - Add ACK filter and NAT awareness to sch_cake packet scheduler, from Toke Høiland-Jørgensen. - Support regions and region snapshots in devlink, from Alex Vesker. - Allow to attach XDP programs to both HW and SW at the same time on a given device, with initial support in nfp. From Jakub Kicinski. - Add TLS RX offload and support in mlx5, from Ilya Lesokhin. - Use PHYLIB in r8169 driver, from Heiner Kallweit. - All sorts of changes to support Spectrum 2 in mlxsw driver, from Ido Schimmel. - PTP support in mv88e6xxx DSA driver, from Andrew Lunn. - Make TCP_USER_TIMEOUT socket option more accurate, from Jon Maxwell. - Support for templates in packet scheduler classifier, from Jiri Pirko. - IPV6 support in RDS, from Ka-Cheong Poon. - Native tproxy support in nf_tables, from Máté Eckl. - Maintain IP fragment queue in an rbtree, but optimize properly for in-order frags. From Peter Oskolkov. - Improvde handling of ACKs on hole repairs, from Yuchung Cheng" * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1996 commits) bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" hv/netvsc: Fix NULL dereference at single queue mode fallback net: filter: mark expected switch fall-through xen-netfront: fix warn message as irq device name has '/' cxgb4: Add new T5 PCI device ids 0x50af and 0x50b0 net: dsa: mv88e6xxx: missing unlock on error path rds: fix building with IPV6=m inet/connection_sock: prefer _THIS_IP_ to current_text_addr net: dsa: mv88e6xxx: bitwise vs logical bug net: sock_diag: Fix spectre v1 gadget in __sock_diag_cmd() ieee802154: hwsim: using right kind of iteration net: hns3: Add vlan filter setting by ethtool command -K net: hns3: Set tx ring' tc info when netdev is up net: hns3: Remove tx ring BD len register in hns3_enet net: hns3: Fix desc num set to default when setting channel net: hns3: Fix for phy link issue when using marvell phy driver net: hns3: Fix for information of phydev lost problem when down/up net: hns3: Fix for command format parsing error in hclge_is_all_function_id_zero net: hns3: Add support for serdes loopback selftest bnxt_en: take coredump_record structure off stack ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2018-08-15 15:04:25 -0700
committer: Linus Torvalds <torvalds@linux-foundation.org> 2018-08-15 15:04:25 -0700
commit: 9a76aba02a37718242d7cdc294f0a3901928aa57 (patch)
tree: 2040d038f85d2120f21af83b0793efd5af1864e3 /tools/testing/selftests
parent: x86: i8259: Add missing include file (diff)
parent: bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" (diff)
download: linux-dev-9a76aba02a37718242d7cdc294f0a3901928aa57.tar.xz
linux-dev-9a76aba02a37718242d7cdc294f0a3901928aa57.zip
78 files changed, 10120 insertions, 292 deletions
diff --git a/tools/testing/selftests/bpf/Makefile b/tools/testing/selftests/bpf/Makefile
index a362e3d7abc6..fff7fb1285fc 100644
--- a/tools/testing/selftests/bpf/Makefile
+++ b/tools/testing/selftests/bpf/Makefile
@@ -22,7 +22,8 @@ $(TEST_CUSTOM_PROGS): $(OUTPUT)/%: %.c
 # Order correspond to 'make run_tests' order
 TEST_GEN_PROGS = test_verifier test_tag test_maps test_lru_map test_lpm_map test_progs \
 	test_align test_verifier_log test_dev_cgroup test_tcpbpf_user \
-	test_sock test_btf test_sockmap test_lirc_mode2_user get_cgroup_id_user
+	test_sock test_btf test_sockmap test_lirc_mode2_user get_cgroup_id_user \
+	test_socket_cookie test_cgroup_storage test_select_reuseport
 
 TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test_obj_id.o \
 	test_pkt_md_access.o test_xdp_redirect.o test_xdp_meta.o sockmap_parse_prog.o     \
@@ -33,7 +34,8 @@ TEST_GEN_FILES = test_pkt_access.o test_xdp.o test_l4lb.o test_tcp_estats.o test
 	test_btf_haskv.o test_btf_nokv.o test_sockmap_kern.o test_tunnel_kern.o \
 	test_get_stack_rawtp.o test_sockmap_kern.o test_sockhash_kern.o \
 	test_lwt_seg6local.o sendmsg4_prog.o sendmsg6_prog.o test_lirc_mode2_kern.o \
-	get_cgroup_id_kern.o
+	get_cgroup_id_kern.o socket_cookie_prog.o test_select_reuseport_kern.o \
+	test_skb_cgroup_id_kern.o
 
 # Order correspond to 'make run_tests' order
 TEST_PROGS := test_kmod.sh \
@@ -44,10 +46,11 @@ TEST_PROGS := test_kmod.sh \
 	test_sock_addr.sh \
 	test_tunnel.sh \
 	test_lwt_seg6local.sh \
-	test_lirc_mode2.sh
+	test_lirc_mode2.sh \
+	test_skb_cgroup_id.sh
 
 # Compile but not part of 'make run_tests'
-TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr
+TEST_GEN_PROGS_EXTENDED = test_libbpf_open test_sock_addr test_skb_cgroup_id_user
 
 include ../lib.mk
 
@@ -58,11 +61,15 @@ $(TEST_GEN_PROGS): $(BPFOBJ)
 $(TEST_GEN_PROGS_EXTENDED): $(OUTPUT)/libbpf.a
 
 $(OUTPUT)/test_dev_cgroup: cgroup_helpers.c
+$(OUTPUT)/test_skb_cgroup_id_user: cgroup_helpers.c
 $(OUTPUT)/test_sock: cgroup_helpers.c
 $(OUTPUT)/test_sock_addr: cgroup_helpers.c
+$(OUTPUT)/test_socket_cookie: cgroup_helpers.c
 $(OUTPUT)/test_sockmap: cgroup_helpers.c
+$(OUTPUT)/test_tcpbpf_user: cgroup_helpers.c
 $(OUTPUT)/test_progs: trace_helpers.c
 $(OUTPUT)/get_cgroup_id_user: cgroup_helpers.c
+$(OUTPUT)/test_cgroup_storage: cgroup_helpers.c
 
 .PHONY: force
 
diff --git a/tools/testing/selftests/bpf/bpf_helpers.h b/tools/testing/selftests/bpf/bpf_helpers.h
index 810de20e8e26..e4be7730222d 100644
--- a/tools/testing/selftests/bpf/bpf_helpers.h
+++ b/tools/testing/selftests/bpf/bpf_helpers.h
@@ -65,6 +65,8 @@ static int (*bpf_xdp_adjust_head)(void *ctx, int offset) =
 	(void *) BPF_FUNC_xdp_adjust_head;
 static int (*bpf_xdp_adjust_meta)(void *ctx, int offset) =
 	(void *) BPF_FUNC_xdp_adjust_meta;
+static int (*bpf_get_socket_cookie)(void *ctx) =
+	(void *) BPF_FUNC_get_socket_cookie;
 static int (*bpf_setsockopt)(void *ctx, int level, int optname, void *optval,
 			     int optlen) =
 	(void *) BPF_FUNC_setsockopt;
@@ -109,6 +111,8 @@ static int (*bpf_xdp_adjust_tail)(void *ctx, int offset) =
 static int (*bpf_skb_get_xfrm_state)(void *ctx, int index, void *state,
 				     int size, int flags) =
 	(void *) BPF_FUNC_skb_get_xfrm_state;
+static int (*bpf_sk_select_reuseport)(void *ctx, void *map, void *key, __u32 flags) =
+	(void *) BPF_FUNC_sk_select_reuseport;
 static int (*bpf_get_stack)(void *ctx, void *buf, int size, int flags) =
 	(void *) BPF_FUNC_get_stack;
 static int (*bpf_fib_lookup)(void *ctx, struct bpf_fib_lookup *params,
@@ -133,6 +137,12 @@ static int (*bpf_rc_keydown)(void *ctx, unsigned int protocol,
 	(void *) BPF_FUNC_rc_keydown;
 static unsigned long long (*bpf_get_current_cgroup_id)(void) =
 	(void *) BPF_FUNC_get_current_cgroup_id;
+static void *(*bpf_get_local_storage)(void *map, unsigned long long flags) =
+	(void *) BPF_FUNC_get_local_storage;
+static unsigned long long (*bpf_skb_cgroup_id)(void *ctx) =
+	(void *) BPF_FUNC_skb_cgroup_id;
+static unsigned long long (*bpf_skb_ancestor_cgroup_id)(void *ctx, int level) =
+	(void *) BPF_FUNC_skb_ancestor_cgroup_id;
 
 /* llvm builtin functions that eBPF C program may use to
  * emit BPF_LD_ABS and BPF_LD_IND instructions
@@ -169,6 +179,8 @@ struct bpf_map_def {
 
 static int (*bpf_skb_load_bytes)(void *ctx, int off, void *to, int len) =
 	(void *) BPF_FUNC_skb_load_bytes;
+static int (*bpf_skb_load_bytes_relative)(void *ctx, int off, void *to, int len, __u32 start_header) =
+	(void *) BPF_FUNC_skb_load_bytes_relative;
 static int (*bpf_skb_store_bytes)(void *ctx, int off, void *from, int len, int flags) =
 	(void *) BPF_FUNC_skb_store_bytes;
 static int (*bpf_l3_csum_replace)(void *ctx, int off, int from, int to, int flags) =
diff --git a/tools/testing/selftests/bpf/bpf_util.h b/tools/testing/selftests/bpf/bpf_util.h
index d0811b3d6a6f..315a44fa32af 100644
--- a/tools/testing/selftests/bpf/bpf_util.h
+++ b/tools/testing/selftests/bpf/bpf_util.h
@@ -44,4 +44,8 @@ static inline unsigned int bpf_num_possible_cpus(void)
 		name[bpf_num_possible_cpus()]
 #define bpf_percpu(name, cpu) name[(cpu)].v
 
+#ifndef ARRAY_SIZE
+# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
+#endif
+
 #endif /* __BPF_UTIL__ */
diff --git a/tools/testing/selftests/bpf/cgroup_helpers.c b/tools/testing/selftests/bpf/cgroup_helpers.c
index c87b4e052ce9..cf16948aad4a 100644
--- a/tools/testing/selftests/bpf/cgroup_helpers.c
+++ b/tools/testing/selftests/bpf/cgroup_helpers.c
@@ -118,7 +118,7 @@ static int join_cgroup_from_top(char *cgroup_path)
  *
  * On success, it returns 0, otherwise on failure it returns 1.
  */
-int join_cgroup(char *path)
+int join_cgroup(const char *path)
 {
 	char cgroup_path[PATH_MAX + 1];
 
@@ -158,7 +158,7 @@ void cleanup_cgroup_environment(void)
  * On success, it returns the file descriptor. On failure it returns 0.
  * If there is a failure, it prints the error to stderr.
  */
-int create_and_get_cgroup(char *path)
+int create_and_get_cgroup(const char *path)
 {
 	char cgroup_path[PATH_MAX + 1];
 	int fd;
@@ -186,7 +186,7 @@ int create_and_get_cgroup(char *path)
  * which is an invalid cgroup id.
  * If there is a failure, it prints the error to stderr.
  */
-unsigned long long get_cgroup_id(char *path)
+unsigned long long get_cgroup_id(const char *path)
 {
 	int dirfd, err, flags, mount_id, fhsize;
 	union {
diff --git a/tools/testing/selftests/bpf/cgroup_helpers.h b/tools/testing/selftests/bpf/cgroup_helpers.h
index 20a4a5dcd469..d64bb8957090 100644
--- a/tools/testing/selftests/bpf/cgroup_helpers.h
+++ b/tools/testing/selftests/bpf/cgroup_helpers.h
@@ -9,10 +9,10 @@
 	__FILE__, __LINE__, clean_errno(), ##__VA_ARGS__)
 
 
-int create_and_get_cgroup(char *path);
-int join_cgroup(char *path);
+int create_and_get_cgroup(const char *path);
+int join_cgroup(const char *path);
 int setup_cgroup_environment(void);
 void cleanup_cgroup_environment(void);
-unsigned long long get_cgroup_id(char *path);
+unsigned long long get_cgroup_id(const char *path);
 
 #endif
diff --git a/tools/testing/selftests/bpf/socket_cookie_prog.c b/tools/testing/selftests/bpf/socket_cookie_prog.c
new file mode 100644
index 000000000000..9ff8ac4b0bf6
--- /dev/null
+++ b/tools/testing/selftests/bpf/socket_cookie_prog.c
@@ -0,0 +1,60 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Facebook
+
+#include <linux/bpf.h>
+#include <sys/socket.h>
+
+#include "bpf_helpers.h"
+#include "bpf_endian.h"
+
+struct bpf_map_def SEC("maps") socket_cookies = {
+	.type = BPF_MAP_TYPE_HASH,
+	.key_size = sizeof(__u64),
+	.value_size = sizeof(__u32),
+	.max_entries = 1 << 8,
+};
+
+SEC("cgroup/connect6")
+int set_cookie(struct bpf_sock_addr *ctx)
+{
+	__u32 cookie_value = 0xFF;
+	__u64 cookie_key;
+
+	if (ctx->family != AF_INET6 || ctx->user_family != AF_INET6)
+		return 1;
+
+	cookie_key = bpf_get_socket_cookie(ctx);
+	if (bpf_map_update_elem(&socket_cookies, &cookie_key, &cookie_value, 0))
+		return 0;
+
+	return 1;
+}
+
+SEC("sockops")
+int update_cookie(struct bpf_sock_ops *ctx)
+{
+	__u32 new_cookie_value;
+	__u32 *cookie_value;
+	__u64 cookie_key;
+
+	if (ctx->family != AF_INET6)
+		return 1;
+
+	if (ctx->op != BPF_SOCK_OPS_TCP_CONNECT_CB)
+		return 1;
+
+	cookie_key = bpf_get_socket_cookie(ctx);
+
+	cookie_value = bpf_map_lookup_elem(&socket_cookies, &cookie_key);
+	if (!cookie_value)
+		return 1;
+
+	new_cookie_value = (ctx->local_port << 8) | *cookie_value;
+	bpf_map_update_elem(&socket_cookies, &cookie_key, &new_cookie_value, 0);
+
+	return 1;
+}
+
+int _version SEC("version") = 1;
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/tcp_client.py b/tools/testing/selftests/bpf/tcp_client.py
index 481dccdf140c..7f8200a8702b 100755
--- a/tools/testing/selftests/bpf/tcp_client.py
+++ b/tools/testing/selftests/bpf/tcp_client.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python2
+#!/usr/bin/env python3
 #
 # SPDX-License-Identifier: GPL-2.0
 #
@@ -9,11 +9,11 @@ import subprocess
 import select
 
 def read(sock, n):
-    buf = ''
+    buf = b''
     while len(buf) < n:
         rem = n - len(buf)
         try: s = sock.recv(rem)
-        except (socket.error), e: return ''
+        except (socket.error) as e: return b''
         buf += s
     return buf
 
@@ -22,7 +22,7 @@ def send(sock, s):
     count = 0
     while count < total:
         try: n = sock.send(s)
-        except (socket.error), e: n = 0
+        except (socket.error) as e: n = 0
         if n == 0:
             return count;
         count += n
@@ -39,10 +39,10 @@ try:
 except socket.error as e:
     sys.exit(1)
 
-buf = ''
+buf = b''
 n = 0
 while n < 1000:
-    buf += '+'
+    buf += b'+'
     n += 1
 
 sock.settimeout(1);
diff --git a/tools/testing/selftests/bpf/tcp_server.py b/tools/testing/selftests/bpf/tcp_server.py
index bc454d7d0be2..b39903fca4c8 100755
--- a/tools/testing/selftests/bpf/tcp_server.py
+++ b/tools/testing/selftests/bpf/tcp_server.py
@@ -1,4 +1,4 @@
-#!/usr/bin/env python2
+#!/usr/bin/env python3
 #
 # SPDX-License-Identifier: GPL-2.0
 #
@@ -9,11 +9,11 @@ import subprocess
 import select
 
 def read(sock, n):
-    buf = ''
+    buf = b''
     while len(buf) < n:
         rem = n - len(buf)
         try: s = sock.recv(rem)
-        except (socket.error), e: return ''
+        except (socket.error) as e: return b''
         buf += s
     return buf
 
@@ -22,7 +22,7 @@ def send(sock, s):
     count = 0
     while count < total:
         try: n = sock.send(s)
-        except (socket.error), e: n = 0
+        except (socket.error) as e: n = 0
         if n == 0:
             return count;
         count += n
@@ -43,7 +43,7 @@ host = socket.gethostname()
 
 try: serverSocket.bind((host, 0))
 except socket.error as msg:
-    print 'bind fails: ', msg
+    print('bind fails: ' + str(msg))
 
 sn = serverSocket.getsockname()
 serverPort = sn[1]
@@ -51,10 +51,10 @@ serverPort = sn[1]
 cmdStr = ("./tcp_client.py %d &") % (serverPort)
 os.system(cmdStr)
 
-buf = ''
+buf = b''
 n = 0
 while n < 500:
-    buf += '.'
+    buf += b'.'
     n += 1
 
 serverSocket.listen(MAX_PORTS)
@@ -79,5 +79,5 @@ while True:
                 serverSocket.close()
                 sys.exit(0)
     else:
-        print 'Select timeout!'
+        print('Select timeout!')
         sys.exit(1)
diff --git a/tools/testing/selftests/bpf/test_align.c b/tools/testing/selftests/bpf/test_align.c
index 6b1b302310fe..5f377ec53f2f 100644
--- a/tools/testing/selftests/bpf/test_align.c
+++ b/tools/testing/selftests/bpf/test_align.c
@@ -18,10 +18,7 @@
 
 #include "../../../include/linux/filter.h"
 #include "bpf_rlimit.h"
-
-#ifndef ARRAY_SIZE
-# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#endif
+#include "bpf_util.h"
 
 #define MAX_INSNS	512
 #define MAX_MATCHES	16
diff --git a/tools/testing/selftests/bpf/test_btf.c b/tools/testing/selftests/bpf/test_btf.c
index ffdd27737c9e..6b5cfeb7a9cc 100644
--- a/tools/testing/selftests/bpf/test_btf.c
+++ b/tools/testing/selftests/bpf/test_btf.c
@@ -19,6 +19,7 @@
 #include <bpf/btf.h>
 
 #include "bpf_rlimit.h"
+#include "bpf_util.h"
 
 static uint32_t pass_cnt;
 static uint32_t error_cnt;
@@ -93,10 +94,6 @@ static int __base_pr(const char *format, ...)
 #define MAX_NR_RAW_TYPES 1024
 #define BTF_LOG_BUF_SIZE 65535
 
-#ifndef ARRAY_SIZE
-# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#endif
-
 static struct args {
 	unsigned int raw_test_num;
 	unsigned int file_test_num;
@@ -131,6 +128,8 @@ struct btf_raw_test {
 	__u32 max_entries;
 	bool btf_load_err;
 	bool map_create_err;
+	bool ordered_map;
+	bool lossless_map;
 	int hdr_len_delta;
 	int type_off_delta;
 	int str_off_delta;
@@ -2093,8 +2092,7 @@ struct pprint_mapv {
 	} aenum;
 };
 
-static struct btf_raw_test pprint_test = {
-	.descr = "BTF pretty print test #1",
+static struct btf_raw_test pprint_test_template = {
 	.raw_types = {
 		/* unsighed char */			/* [1] */
 		BTF_TYPE_INT_ENC(NAME_TBD, 0, 0, 8, 1),
@@ -2146,8 +2144,6 @@ static struct btf_raw_test pprint_test = {
 	},
 	.str_sec = "\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum",
 	.str_sec_size = sizeof("\0unsigned char\0unsigned short\0unsigned int\0int\0unsigned long long\0uint8_t\0uint16_t\0uint32_t\0int32_t\0uint64_t\0ui64\0ui8a\0ENUM_ZERO\0ENUM_ONE\0ENUM_TWO\0ENUM_THREE\0pprint_mapv\0ui32\0ui16\0si32\0unused_bits2a\0bits28\0unused_bits2b\0aenum"),
-	.map_type = BPF_MAP_TYPE_ARRAY,
-	.map_name = "pprint_test",
 	.key_size = sizeof(unsigned int),
 	.value_size = sizeof(struct pprint_mapv),
 	.key_type_id = 3,	/* unsigned int */
@@ -2155,6 +2151,40 @@ static struct btf_raw_test pprint_test = {
 	.max_entries = 128 * 1024,
 };
 
+static struct btf_pprint_test_meta {
+	const char *descr;
+	enum bpf_map_type map_type;
+	const char *map_name;
+	bool ordered_map;
+	bool lossless_map;
+} pprint_tests_meta[] = {
+{
+	.descr = "BTF pretty print array",
+	.map_type = BPF_MAP_TYPE_ARRAY,
+	.map_name = "pprint_test_array",
+	.ordered_map = true,
+	.lossless_map = true,
+},
+
+{
+	.descr = "BTF pretty print hash",
+	.map_type = BPF_MAP_TYPE_HASH,
+	.map_name = "pprint_test_hash",
+	.ordered_map = false,
+	.lossless_map = true,
+},
+
+{
+	.descr = "BTF pretty print lru hash",
+	.map_type = BPF_MAP_TYPE_LRU_HASH,
+	.map_name = "pprint_test_lru_hash",
+	.ordered_map = false,
+	.lossless_map = false,
+},
+
+};
+
+
 static void set_pprint_mapv(struct pprint_mapv *v, uint32_t i)
 {
 	v->ui32 = i;
@@ -2166,10 +2196,12 @@ static void set_pprint_mapv(struct pprint_mapv *v, uint32_t i)
 	v->aenum = i & 0x03;
 }
 
-static int test_pprint(void)
+static int do_test_pprint(void)
 {
-	const struct btf_raw_test *test = &pprint_test;
+	const struct btf_raw_test *test = &pprint_test_template;
 	struct bpf_create_map_attr create_attr = {};
+	unsigned int key, nr_read_elems;
+	bool ordered_map, lossless_map;
 	int map_fd = -1, btf_fd = -1;
 	struct pprint_mapv mapv = {};
 	unsigned int raw_btf_size;
@@ -2178,7 +2210,6 @@ static int test_pprint(void)
 	char pin_path[255];
 	size_t line_len = 0;
 	char *line = NULL;
-	unsigned int key;
 	uint8_t *raw_btf;
 	ssize_t nread;
 	int err, ret;
@@ -2251,14 +2282,18 @@ static int test_pprint(void)
 		goto done;
 	}
 
-	key = 0;
+	nr_read_elems = 0;
+	ordered_map = test->ordered_map;
+	lossless_map = test->lossless_map;
 	do {
 		ssize_t nexpected_line;
+		unsigned int next_key;
 
-		set_pprint_mapv(&mapv, key);
+		next_key = ordered_map ? nr_read_elems : atoi(line);
+		set_pprint_mapv(&mapv, next_key);
 		nexpected_line = snprintf(expected_line, sizeof(expected_line),
 					  "%u: {%u,0,%d,0x%x,0x%x,0x%x,{%lu|[%u,%u,%u,%u,%u,%u,%u,%u]},%s}\n",
-					  key,
+					  next_key,
 					  mapv.ui32, mapv.si32,
 					  mapv.unused_bits2a, mapv.bits28, mapv.unused_bits2b,
 					  mapv.ui64,
@@ -2281,11 +2316,12 @@ static int test_pprint(void)
 		}
 
 		nread = getline(&line, &line_len, pin_file);
-	} while (++key < test->max_entries && nread > 0);
+	} while (++nr_read_elems < test->max_entries && nread > 0);
 
-	if (CHECK(key < test->max_entries,
-		  "Unexpected EOF. key:%u test->max_entries:%u",
-		  key, test->max_entries)) {
+	if (lossless_map &&
+	    CHECK(nr_read_elems < test->max_entries,
+		  "Unexpected EOF. nr_read_elems:%u test->max_entries:%u",
+		  nr_read_elems, test->max_entries)) {
 		err = -1;
 		goto done;
 	}
@@ -2314,6 +2350,24 @@ done:
 	return err;
 }
 
+static int test_pprint(void)
+{
+	unsigned int i;
+	int err = 0;
+
+	for (i = 0; i < ARRAY_SIZE(pprint_tests_meta); i++) {
+		pprint_test_template.descr = pprint_tests_meta[i].descr;
+		pprint_test_template.map_type = pprint_tests_meta[i].map_type;
+		pprint_test_template.map_name = pprint_tests_meta[i].map_name;
+		pprint_test_template.ordered_map = pprint_tests_meta[i].ordered_map;
+		pprint_test_template.lossless_map = pprint_tests_meta[i].lossless_map;
+
+		err |= count_result(do_test_pprint());
+	}
+
+	return err;
+}
+
 static void usage(const char *cmd)
 {
 	fprintf(stderr, "Usage: %s [-l] [[-r test_num (1 - %zu)] | [-g test_num (1 - %zu)] | [-f test_num (1 - %zu)] | [-p]]\n",
@@ -2409,7 +2463,7 @@ int main(int argc, char **argv)
 		err |= test_file();
 
 	if (args.pprint_test)
-		err |= count_result(test_pprint());
+		err |= test_pprint();
 
 	if (args.raw_test || args.get_info_test || args.file_test ||
 	    args.pprint_test)
diff --git a/tools/testing/selftests/bpf/test_cgroup_storage.c b/tools/testing/selftests/bpf/test_cgroup_storage.c
new file mode 100644
index 000000000000..dc83fb2d3f27
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_cgroup_storage.c
@@ -0,0 +1,130 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <assert.h>
+#include <bpf/bpf.h>
+#include <linux/filter.h>
+#include <stdio.h>
+#include <stdlib.h>
+
+#include "cgroup_helpers.h"
+
+char bpf_log_buf[BPF_LOG_BUF_SIZE];
+
+#define TEST_CGROUP "/test-bpf-cgroup-storage-buf/"
+
+int main(int argc, char **argv)
+{
+	struct bpf_insn prog[] = {
+		BPF_LD_MAP_FD(BPF_REG_1, 0), /* map fd */
+		BPF_MOV64_IMM(BPF_REG_2, 0), /* flags, not used */
+		BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+			     BPF_FUNC_get_local_storage),
+		BPF_MOV64_IMM(BPF_REG_1, 1),
+		BPF_STX_XADD(BPF_DW, BPF_REG_0, BPF_REG_1, 0),
+		BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0),
+		BPF_ALU64_IMM(BPF_AND, BPF_REG_1, 0x1),
+		BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+		BPF_EXIT_INSN(),
+	};
+	size_t insns_cnt = sizeof(prog) / sizeof(struct bpf_insn);
+	int error = EXIT_FAILURE;
+	int map_fd, prog_fd, cgroup_fd;
+	struct bpf_cgroup_storage_key key;
+	unsigned long long value;
+
+	map_fd = bpf_create_map(BPF_MAP_TYPE_CGROUP_STORAGE, sizeof(key),
+				sizeof(value), 0, 0);
+	if (map_fd < 0) {
+		printf("Failed to create map: %s\n", strerror(errno));
+		goto out;
+	}
+
+	prog[0].imm = map_fd;
+	prog_fd = bpf_load_program(BPF_PROG_TYPE_CGROUP_SKB,
+				   prog, insns_cnt, "GPL", 0,
+				   bpf_log_buf, BPF_LOG_BUF_SIZE);
+	if (prog_fd < 0) {
+		printf("Failed to load bpf program: %s\n", bpf_log_buf);
+		goto out;
+	}
+
+	if (setup_cgroup_environment()) {
+		printf("Failed to setup cgroup environment\n");
+		goto err;
+	}
+
+	/* Create a cgroup, get fd, and join it */
+	cgroup_fd = create_and_get_cgroup(TEST_CGROUP);
+	if (!cgroup_fd) {
+		printf("Failed to create test cgroup\n");
+		goto err;
+	}
+
+	if (join_cgroup(TEST_CGROUP)) {
+		printf("Failed to join cgroup\n");
+		goto err;
+	}
+
+	/* Attach the bpf program */
+	if (bpf_prog_attach(prog_fd, cgroup_fd, BPF_CGROUP_INET_EGRESS, 0)) {
+		printf("Failed to attach bpf program\n");
+		goto err;
+	}
+
+	if (bpf_map_get_next_key(map_fd, NULL, &key)) {
+		printf("Failed to get the first key in cgroup storage\n");
+		goto err;
+	}
+
+	if (bpf_map_lookup_elem(map_fd, &key, &value)) {
+		printf("Failed to lookup cgroup storage\n");
+		goto err;
+	}
+
+	/* Every second packet should be dropped */
+	assert(system("ping localhost -c 1 -W 1 -q > /dev/null") == 0);
+	assert(system("ping localhost -c 1 -W 1 -q > /dev/null"));
+	assert(system("ping localhost -c 1 -W 1 -q > /dev/null") == 0);
+
+	/* Check the counter in the cgroup local storage */
+	if (bpf_map_lookup_elem(map_fd, &key, &value)) {
+		printf("Failed to lookup cgroup storage\n");
+		goto err;
+	}
+
+	if (value != 3) {
+		printf("Unexpected data in the cgroup storage: %llu\n", value);
+		goto err;
+	}
+
+	/* Bump the counter in the cgroup local storage */
+	value++;
+	if (bpf_map_update_elem(map_fd, &key, &value, 0)) {
+		printf("Failed to update the data in the cgroup storage\n");
+		goto err;
+	}
+
+	/* Every second packet should be dropped */
+	assert(system("ping localhost -c 1 -W 1 -q > /dev/null") == 0);
+	assert(system("ping localhost -c 1 -W 1 -q > /dev/null"));
+	assert(system("ping localhost -c 1 -W 1 -q > /dev/null") == 0);
+
+	/* Check the final value of the counter in the cgroup local storage */
+	if (bpf_map_lookup_elem(map_fd, &key, &value)) {
+		printf("Failed to lookup the cgroup storage\n");
+		goto err;
+	}
+
+	if (value != 7) {
+		printf("Unexpected data in the cgroup storage: %llu\n", value);
+		goto err;
+	}
+
+	error = 0;
+	printf("test_cgroup_storage:PASS\n");
+
+err:
+	cleanup_cgroup_environment();
+
+out:
+	return error;
+}
diff --git a/tools/testing/selftests/bpf/test_maps.c b/tools/testing/selftests/bpf/test_maps.c
index 6c253343a6f9..6f54f84144a0 100644
--- a/tools/testing/selftests/bpf/test_maps.c
+++ b/tools/testing/selftests/bpf/test_maps.c
@@ -17,7 +17,8 @@
 #include <stdlib.h>
 
 #include <sys/wait.h>
-
+#include <sys/socket.h>
+#include <netinet/in.h>
 #include <linux/bpf.h>
 
 #include <bpf/bpf.h>
@@ -26,8 +27,21 @@
 #include "bpf_util.h"
 #include "bpf_rlimit.h"
 
+#ifndef ENOTSUPP
+#define ENOTSUPP 524
+#endif
+
 static int map_flags;
 
+#define CHECK(condition, tag, format...) ({				\
+	int __ret = !!(condition);					\
+	if (__ret) {							\
+		printf("%s(%d):FAIL:%s ", __func__, __LINE__, tag);	\
+		printf(format);						\
+		exit(-1);						\
+	}								\
+})
+
 static void test_hashmap(int task, void *data)
 {
 	long long key, next_key, first_key, value;
@@ -1150,6 +1164,250 @@ static void test_map_wronly(void)
 	assert(bpf_map_get_next_key(fd, &key, &value) == -1 && errno == EPERM);
 }
 
+static void prepare_reuseport_grp(int type, int map_fd,
+				  __s64 *fds64, __u64 *sk_cookies,
+				  unsigned int n)
+{
+	socklen_t optlen, addrlen;
+	struct sockaddr_in6 s6;
+	const __u32 index0 = 0;
+	const int optval = 1;
+	unsigned int i;
+	u64 sk_cookie;
+	__s64 fd64;
+	int err;
+
+	s6.sin6_family = AF_INET6;
+	s6.sin6_addr = in6addr_any;
+	s6.sin6_port = 0;
+	addrlen = sizeof(s6);
+	optlen = sizeof(sk_cookie);
+
+	for (i = 0; i < n; i++) {
+		fd64 = socket(AF_INET6, type, 0);
+		CHECK(fd64 == -1, "socket()",
+		      "sock_type:%d fd64:%lld errno:%d\n",
+		      type, fd64, errno);
+
+		err = setsockopt(fd64, SOL_SOCKET, SO_REUSEPORT,
+				 &optval, sizeof(optval));
+		CHECK(err == -1, "setsockopt(SO_REUSEPORT)",
+		      "err:%d errno:%d\n", err, errno);
+
+		/* reuseport_array does not allow unbound sk */
+		err = bpf_map_update_elem(map_fd, &index0, &fd64,
+					  BPF_ANY);
+		CHECK(err != -1 || errno != EINVAL,
+		      "reuseport array update unbound sk",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+
+		err = bind(fd64, (struct sockaddr *)&s6, sizeof(s6));
+		CHECK(err == -1, "bind()",
+		      "sock_type:%d err:%d errno:%d\n", type, err, errno);
+
+		if (i == 0) {
+			err = getsockname(fd64, (struct sockaddr *)&s6,
+					  &addrlen);
+			CHECK(err == -1, "getsockname()",
+			      "sock_type:%d err:%d errno:%d\n",
+			      type, err, errno);
+		}
+
+		err = getsockopt(fd64, SOL_SOCKET, SO_COOKIE, &sk_cookie,
+				 &optlen);
+		CHECK(err == -1, "getsockopt(SO_COOKIE)",
+		      "sock_type:%d err:%d errno:%d\n", type, err, errno);
+
+		if (type == SOCK_STREAM) {
+			/*
+			 * reuseport_array does not allow
+			 * non-listening tcp sk.
+			 */
+			err = bpf_map_update_elem(map_fd, &index0, &fd64,
+						  BPF_ANY);
+			CHECK(err != -1 || errno != EINVAL,
+			      "reuseport array update non-listening sk",
+			      "sock_type:%d err:%d errno:%d\n",
+			      type, err, errno);
+			err = listen(fd64, 0);
+			CHECK(err == -1, "listen()",
+			      "sock_type:%d, err:%d errno:%d\n",
+			      type, err, errno);
+		}
+
+		fds64[i] = fd64;
+		sk_cookies[i] = sk_cookie;
+	}
+}
+
+static void test_reuseport_array(void)
+{
+#define REUSEPORT_FD_IDX(err, last) ({ (err) ? last : !last; })
+
+	const __u32 array_size = 4, index0 = 0, index3 = 3;
+	int types[2] = { SOCK_STREAM, SOCK_DGRAM }, type;
+	__u64 grpa_cookies[2], sk_cookie, map_cookie;
+	__s64 grpa_fds64[2] = { -1, -1 }, fd64 = -1;
+	const __u32 bad_index = array_size;
+	int map_fd, err, t, f;
+	__u32 fds_idx = 0;
+	int fd;
+
+	map_fd = bpf_create_map(BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
+				sizeof(__u32), sizeof(__u64), array_size, 0);
+	CHECK(map_fd == -1, "reuseport array create",
+	      "map_fd:%d, errno:%d\n", map_fd, errno);
+
+	/* Test lookup/update/delete with invalid index */
+	err = bpf_map_delete_elem(map_fd, &bad_index);
+	CHECK(err != -1 || errno != E2BIG, "reuseport array del >=max_entries",
+	      "err:%d errno:%d\n", err, errno);
+
+	err = bpf_map_update_elem(map_fd, &bad_index, &fd64, BPF_ANY);
+	CHECK(err != -1 || errno != E2BIG,
+	      "reuseport array update >=max_entries",
+	      "err:%d errno:%d\n", err, errno);
+
+	err = bpf_map_lookup_elem(map_fd, &bad_index, &map_cookie);
+	CHECK(err != -1 || errno != ENOENT,
+	      "reuseport array update >=max_entries",
+	      "err:%d errno:%d\n", err, errno);
+
+	/* Test lookup/delete non existence elem */
+	err = bpf_map_lookup_elem(map_fd, &index3, &map_cookie);
+	CHECK(err != -1 || errno != ENOENT,
+	      "reuseport array lookup not-exist elem",
+	      "err:%d errno:%d\n", err, errno);
+	err = bpf_map_delete_elem(map_fd, &index3);
+	CHECK(err != -1 || errno != ENOENT,
+	      "reuseport array del not-exist elem",
+	      "err:%d errno:%d\n", err, errno);
+
+	for (t = 0; t < ARRAY_SIZE(types); t++) {
+		type = types[t];
+
+		prepare_reuseport_grp(type, map_fd, grpa_fds64,
+				      grpa_cookies, ARRAY_SIZE(grpa_fds64));
+
+		/* Test BPF_* update flags */
+		/* BPF_EXIST failure case */
+		err = bpf_map_update_elem(map_fd, &index3, &grpa_fds64[fds_idx],
+					  BPF_EXIST);
+		CHECK(err != -1 || errno != ENOENT,
+		      "reuseport array update empty elem BPF_EXIST",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+		fds_idx = REUSEPORT_FD_IDX(err, fds_idx);
+
+		/* BPF_NOEXIST success case */
+		err = bpf_map_update_elem(map_fd, &index3, &grpa_fds64[fds_idx],
+					  BPF_NOEXIST);
+		CHECK(err == -1,
+		      "reuseport array update empty elem BPF_NOEXIST",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+		fds_idx = REUSEPORT_FD_IDX(err, fds_idx);
+
+		/* BPF_EXIST success case. */
+		err = bpf_map_update_elem(map_fd, &index3, &grpa_fds64[fds_idx],
+					  BPF_EXIST);
+		CHECK(err == -1,
+		      "reuseport array update same elem BPF_EXIST",
+		      "sock_type:%d err:%d errno:%d\n", type, err, errno);
+		fds_idx = REUSEPORT_FD_IDX(err, fds_idx);
+
+		/* BPF_NOEXIST failure case */
+		err = bpf_map_update_elem(map_fd, &index3, &grpa_fds64[fds_idx],
+					  BPF_NOEXIST);
+		CHECK(err != -1 || errno != EEXIST,
+		      "reuseport array update non-empty elem BPF_NOEXIST",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+		fds_idx = REUSEPORT_FD_IDX(err, fds_idx);
+
+		/* BPF_ANY case (always succeed) */
+		err = bpf_map_update_elem(map_fd, &index3, &grpa_fds64[fds_idx],
+					  BPF_ANY);
+		CHECK(err == -1,
+		      "reuseport array update same sk with BPF_ANY",
+		      "sock_type:%d err:%d errno:%d\n", type, err, errno);
+
+		fd64 = grpa_fds64[fds_idx];
+		sk_cookie = grpa_cookies[fds_idx];
+
+		/* The same sk cannot be added to reuseport_array twice */
+		err = bpf_map_update_elem(map_fd, &index3, &fd64, BPF_ANY);
+		CHECK(err != -1 || errno != EBUSY,
+		      "reuseport array update same sk with same index",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+
+		err = bpf_map_update_elem(map_fd, &index0, &fd64, BPF_ANY);
+		CHECK(err != -1 || errno != EBUSY,
+		      "reuseport array update same sk with different index",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+
+		/* Test delete elem */
+		err = bpf_map_delete_elem(map_fd, &index3);
+		CHECK(err == -1, "reuseport array delete sk",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+
+		/* Add it back with BPF_NOEXIST */
+		err = bpf_map_update_elem(map_fd, &index3, &fd64, BPF_NOEXIST);
+		CHECK(err == -1,
+		      "reuseport array re-add with BPF_NOEXIST after del",
+		      "sock_type:%d err:%d errno:%d\n", type, err, errno);
+
+		/* Test cookie */
+		err = bpf_map_lookup_elem(map_fd, &index3, &map_cookie);
+		CHECK(err == -1 || sk_cookie != map_cookie,
+		      "reuseport array lookup re-added sk",
+		      "sock_type:%d err:%d errno:%d sk_cookie:0x%llx map_cookie:0x%llxn",
+		      type, err, errno, sk_cookie, map_cookie);
+
+		/* Test elem removed by close() */
+		for (f = 0; f < ARRAY_SIZE(grpa_fds64); f++)
+			close(grpa_fds64[f]);
+		err = bpf_map_lookup_elem(map_fd, &index3, &map_cookie);
+		CHECK(err != -1 || errno != ENOENT,
+		      "reuseport array lookup after close()",
+		      "sock_type:%d err:%d errno:%d\n",
+		      type, err, errno);
+	}
+
+	/* Test SOCK_RAW */
+	fd64 = socket(AF_INET6, SOCK_RAW, IPPROTO_UDP);
+	CHECK(fd64 == -1, "socket(SOCK_RAW)", "err:%d errno:%d\n",
+	      err, errno);
+	err = bpf_map_update_elem(map_fd, &index3, &fd64, BPF_NOEXIST);
+	CHECK(err != -1 || errno != ENOTSUPP, "reuseport array update SOCK_RAW",
+	      "err:%d errno:%d\n", err, errno);
+	close(fd64);
+
+	/* Close the 64 bit value map */
+	close(map_fd);
+
+	/* Test 32 bit fd */
+	map_fd = bpf_create_map(BPF_MAP_TYPE_REUSEPORT_SOCKARRAY,
+				sizeof(__u32), sizeof(__u32), array_size, 0);
+	CHECK(map_fd == -1, "reuseport array create",
+	      "map_fd:%d, errno:%d\n", map_fd, errno);
+	prepare_reuseport_grp(SOCK_STREAM, map_fd, &fd64, &sk_cookie, 1);
+	fd = fd64;
+	err = bpf_map_update_elem(map_fd, &index3, &fd, BPF_NOEXIST);
+	CHECK(err == -1, "reuseport array update 32 bit fd",
+	      "err:%d errno:%d\n", err, errno);
+	err = bpf_map_lookup_elem(map_fd, &index3, &map_cookie);
+	CHECK(err != -1 || errno != ENOSPC,
+	      "reuseport array lookup 32 bit fd",
+	      "err:%d errno:%d\n", err, errno);
+	close(fd);
+	close(map_fd);
+}
+
 static void run_all_tests(void)
 {
 	test_hashmap(0, NULL);
@@ -1170,6 +1428,8 @@ static void run_all_tests(void)
 
 	test_map_rdonly();
 	test_map_wronly();
+
+	test_reuseport_array();
 }
 
 int main(void)
diff --git a/tools/testing/selftests/bpf/test_offload.py b/tools/testing/selftests/bpf/test_offload.py
index be800d0e7a84..d59642e70f56 100755
--- a/tools/testing/selftests/bpf/test_offload.py
+++ b/tools/testing/selftests/bpf/test_offload.py
@@ -158,8 +158,9 @@ def tool(name, args, flags, JSON=True, ns="", fail=True, include_stderr=False):
     else:
         return ret, out
 
-def bpftool(args, JSON=True, ns="", fail=True):
-    return tool("bpftool", args, {"json":"-p"}, JSON=JSON, ns=ns, fail=fail)
+def bpftool(args, JSON=True, ns="", fail=True, include_stderr=False):
+    return tool("bpftool", args, {"json":"-p"}, JSON=JSON, ns=ns,
+                fail=fail, include_stderr=include_stderr)
 
 def bpftool_prog_list(expected=None, ns=""):
     _, progs = bpftool("prog show", JSON=True, ns=ns, fail=True)
@@ -201,6 +202,21 @@ def bpftool_map_list_wait(expected=0, n_retry=20):
         time.sleep(0.05)
     raise Exception("Time out waiting for map counts to stabilize want %d, have %d" % (expected, nmaps))
 
+def bpftool_prog_load(sample, file_name, maps=[], prog_type="xdp", dev=None,
+                      fail=True, include_stderr=False):
+    args = "prog load %s %s" % (os.path.join(bpf_test_dir, sample), file_name)
+    if prog_type is not None:
+        args += " type " + prog_type
+    if dev is not None:
+        args += " dev " + dev
+    if len(maps):
+        args += " map " + " map ".join(maps)
+
+    res = bpftool(args, fail=fail, include_stderr=include_stderr)
+    if res[0] == 0:
+        files.append(file_name)
+    return res
+
 def ip(args, force=False, JSON=True, ns="", fail=True, include_stderr=False):
     if force:
         args = "-force " + args
@@ -307,21 +323,25 @@ class NetdevSim:
     Class for netdevsim netdevice and its attributes.
     """
 
-    def __init__(self):
+    def __init__(self, link=None):
+        self.link = link
+
         self.dev = self._netdevsim_create()
         devs.append(self)
 
         self.ns = ""
 
         self.dfs_dir = '/sys/kernel/debug/netdevsim/%s' % (self.dev['ifname'])
+        self.sdev_dir = self.dfs_dir + '/sdev/'
         self.dfs_refresh()
 
     def __getitem__(self, key):
         return self.dev[key]
 
     def _netdevsim_create(self):
+        link = "" if self.link is None else "link " + self.link.dev['ifname']
         _, old  = ip("link show")
-        ip("link add sim%d type netdevsim")
+        ip("link add sim%d {link} type netdevsim".format(link=link))
         _, new  = ip("link show")
 
         for dev in new:
@@ -339,13 +359,18 @@ class NetdevSim:
         self.dfs = DebugfsDir(self.dfs_dir)
         return self.dfs
 
+    def dfs_read(self, f):
+        path = os.path.join(self.dfs_dir, f)
+        _, data = cmd('cat %s' % (path))
+        return data.strip()
+
     def dfs_num_bound_progs(self):
-        path = os.path.join(self.dfs_dir, "bpf_bound_progs")
+        path = os.path.join(self.sdev_dir, "bpf_bound_progs")
         _, progs = cmd('ls %s' % (path))
         return len(progs.split())
 
     def dfs_get_bound_progs(self, expected):
-        progs = DebugfsDir(os.path.join(self.dfs_dir, "bpf_bound_progs"))
+        progs = DebugfsDir(os.path.join(self.sdev_dir, "bpf_bound_progs"))
         if expected is not None:
             if len(progs) != expected:
                 fail(True, "%d BPF programs bound, expected %d" %
@@ -547,11 +572,11 @@ def check_extack(output, reference, args):
     if skip_extack:
         return
     lines = output.split("\n")
-    comp = len(lines) >= 2 and lines[1] == reference
+    comp = len(lines) >= 2 and lines[1] == 'Error: ' + reference
     fail(not comp, "Missing or incorrect netlink extack message")
 
 def check_extack_nsim(output, reference, args):
-    check_extack(output, "Error: netdevsim: " + reference, args)
+    check_extack(output, "netdevsim: " + reference, args)
 
 def check_no_extack(res, needle):
     fail((res[1] + res[2]).count(needle) or (res[1] + res[2]).count("Warning:"),
@@ -654,7 +679,7 @@ try:
     ret, _, err = sim.cls_bpf_add_filter(obj, skip_sw=True,
                                          fail=False, include_stderr=True)
     fail(ret == 0, "TC filter loaded without enabling TC offloads")
-    check_extack(err, "Error: TC offload is disabled on net device.", args)
+    check_extack(err, "TC offload is disabled on net device.", args)
     sim.wait_for_flush()
 
     sim.set_ethtool_tc_offloads(True)
@@ -694,7 +719,7 @@ try:
                                          skip_sw=True,
                                          fail=False, include_stderr=True)
     fail(ret == 0, "Offloaded a filter to chain other than 0")
-    check_extack(err, "Error: Driver supports only offload of chain 0.", args)
+    check_extack(err, "Driver supports only offload of chain 0.", args)
     sim.tc_flush_filters()
 
     start_test("Test TC replace...")
@@ -814,24 +839,20 @@ try:
          "Device parameters reported for non-offloaded program")
 
     start_test("Test XDP prog replace with bad flags...")
-    ret, _, err = sim.set_xdp(obj, "offload", force=True,
+    ret, _, err = sim.set_xdp(obj, "generic", force=True,
                               fail=False, include_stderr=True)
     fail(ret == 0, "Replaced XDP program with a program in different mode")
-    check_extack_nsim(err, "program loaded with different flags.", args)
+    fail(err.count("File exists") != 1, "Replaced driver XDP with generic")
     ret, _, err = sim.set_xdp(obj, "", force=True,
                               fail=False, include_stderr=True)
     fail(ret == 0, "Replaced XDP program with a program in different mode")
-    check_extack_nsim(err, "program loaded with different flags.", args)
+    check_extack(err, "program loaded with different flags.", args)
 
     start_test("Test XDP prog remove with bad flags...")
-    ret, _, err = sim.unset_xdp("offload", force=True,
-                                fail=False, include_stderr=True)
-    fail(ret == 0, "Removed program with a bad mode mode")
-    check_extack_nsim(err, "program loaded with different flags.", args)
     ret, _, err = sim.unset_xdp("", force=True,
                                 fail=False, include_stderr=True)
-    fail(ret == 0, "Removed program with a bad mode mode")
-    check_extack_nsim(err, "program loaded with different flags.", args)
+    fail(ret == 0, "Removed program with a bad mode")
+    check_extack(err, "program loaded with different flags.", args)
 
     start_test("Test MTU restrictions...")
     ret, _ = sim.set_mtu(9000, fail=False)
@@ -846,6 +867,25 @@ try:
     sim.set_mtu(1500)
 
     sim.wait_for_flush()
+    start_test("Test non-offload XDP attaching to HW...")
+    bpftool_prog_load("sample_ret0.o", "/sys/fs/bpf/nooffload")
+    nooffload = bpf_pinned("/sys/fs/bpf/nooffload")
+    ret, _, err = sim.set_xdp(nooffload, "offload",
+                              fail=False, include_stderr=True)
+    fail(ret == 0, "attached non-offloaded XDP program to HW")
+    check_extack_nsim(err, "xdpoffload of non-bound program.", args)
+    rm("/sys/fs/bpf/nooffload")
+
+    start_test("Test offload XDP attaching to drv...")
+    bpftool_prog_load("sample_ret0.o", "/sys/fs/bpf/offload",
+                      dev=sim['ifname'])
+    offload = bpf_pinned("/sys/fs/bpf/offload")
+    ret, _, err = sim.set_xdp(offload, "drv", fail=False, include_stderr=True)
+    fail(ret == 0, "attached offloaded XDP program to drv")
+    check_extack(err, "using device-bound program without HW_MODE flag is not supported.", args)
+    rm("/sys/fs/bpf/offload")
+    sim.wait_for_flush()
+
     start_test("Test XDP offload...")
     _, _, err = sim.set_xdp(obj, "offload", verbose=True, include_stderr=True)
     ipl = sim.ip_link_show(xdp=True)
@@ -891,6 +931,60 @@ try:
     rm(pin_file)
     bpftool_prog_list_wait(expected=0)
 
+    start_test("Test multi-attachment XDP - attach...")
+    sim.set_xdp(obj, "offload")
+    xdp = sim.ip_link_show(xdp=True)["xdp"]
+    offloaded = sim.dfs_read("bpf_offloaded_id")
+    fail("prog" not in xdp, "Base program not reported in single program mode")
+    fail(len(ipl["xdp"]["attached"]) != 1,
+         "Wrong attached program count with one program")
+
+    sim.set_xdp(obj, "")
+    two_xdps = sim.ip_link_show(xdp=True)["xdp"]
+    offloaded2 = sim.dfs_read("bpf_offloaded_id")
+
+    fail(two_xdps["mode"] != 4, "Bad mode reported with multiple programs")
+    fail("prog" in two_xdps, "Base program reported in multi program mode")
+    fail(xdp["attached"][0] not in two_xdps["attached"],
+         "Offload program not reported after driver activated")
+    fail(len(two_xdps["attached"]) != 2,
+         "Wrong attached program count with two programs")
+    fail(two_xdps["attached"][0]["prog"]["id"] ==
+         two_xdps["attached"][1]["prog"]["id"],
+         "offloaded and drv programs have the same id")
+    fail(offloaded != offloaded2,
+         "offload ID changed after loading driver program")
+
+    start_test("Test multi-attachment XDP - replace...")
+    ret, _, err = sim.set_xdp(obj, "offload", fail=False, include_stderr=True)
+    fail(err.count("busy") != 1, "Replaced one of programs without -force")
+
+    start_test("Test multi-attachment XDP - detach...")
+    ret, _, err = sim.unset_xdp("drv", force=True,
+                                fail=False, include_stderr=True)
+    fail(ret == 0, "Removed program with a bad mode")
+    check_extack(err, "program loaded with different flags.", args)
+
+    sim.unset_xdp("offload")
+    xdp = sim.ip_link_show(xdp=True)["xdp"]
+    offloaded = sim.dfs_read("bpf_offloaded_id")
+
+    fail(xdp["mode"] != 1, "Bad mode reported after multiple programs")
+    fail("prog" not in xdp,
+         "Base program not reported after multi program mode")
+    fail(xdp["attached"][0] not in two_xdps["attached"],
+         "Offload program not reported after driver activated")
+    fail(len(ipl["xdp"]["attached"]) != 1,
+         "Wrong attached program count with remaining programs")
+    fail(offloaded != "0", "offload ID reported with only driver program left")
+
+    start_test("Test multi-attachment XDP - device remove...")
+    sim.set_xdp(obj, "offload")
+    sim.remove()
+
+    sim = NetdevSim()
+    sim.set_ethtool_tc_offloads(True)
+
     start_test("Test mixing of TC and XDP...")
     sim.tc_add_ingress()
     sim.set_xdp(obj, "offload")
@@ -1085,6 +1179,106 @@ try:
     fail(ret == 0,
          "netdevsim didn't refuse to create a map with offload disabled")
 
+    sim.remove()
+
+    start_test("Test multi-dev ASIC program reuse...")
+    simA = NetdevSim()
+    simB1 = NetdevSim()
+    simB2 = NetdevSim(link=simB1)
+    simB3 = NetdevSim(link=simB1)
+    sims = (simA, simB1, simB2, simB3)
+    simB = (simB1, simB2, simB3)
+
+    bpftool_prog_load("sample_map_ret0.o", "/sys/fs/bpf/nsimA",
+                      dev=simA['ifname'])
+    progA = bpf_pinned("/sys/fs/bpf/nsimA")
+    bpftool_prog_load("sample_map_ret0.o", "/sys/fs/bpf/nsimB",
+                      dev=simB1['ifname'])
+    progB = bpf_pinned("/sys/fs/bpf/nsimB")
+
+    simA.set_xdp(progA, "offload", JSON=False)
+    for d in simB:
+        d.set_xdp(progB, "offload", JSON=False)
+
+    start_test("Test multi-dev ASIC cross-dev replace...")
+    ret, _ = simA.set_xdp(progB, "offload", force=True, JSON=False, fail=False)
+    fail(ret == 0, "cross-ASIC program allowed")
+    for d in simB:
+        ret, _ = d.set_xdp(progA, "offload", force=True, JSON=False, fail=False)
+        fail(ret == 0, "cross-ASIC program allowed")
+
+    start_test("Test multi-dev ASIC cross-dev install...")
+    for d in sims:
+        d.unset_xdp("offload")
+
+    ret, _, err = simA.set_xdp(progB, "offload", force=True, JSON=False,
+                               fail=False, include_stderr=True)
+    fail(ret == 0, "cross-ASIC program allowed")
+    check_extack_nsim(err, "program bound to different dev.", args)
+    for d in simB:
+        ret, _, err = d.set_xdp(progA, "offload", force=True, JSON=False,
+                                fail=False, include_stderr=True)
+        fail(ret == 0, "cross-ASIC program allowed")
+        check_extack_nsim(err, "program bound to different dev.", args)
+
+    start_test("Test multi-dev ASIC cross-dev map reuse...")
+
+    mapA = bpftool("prog show %s" % (progA))[1]["map_ids"][0]
+    mapB = bpftool("prog show %s" % (progB))[1]["map_ids"][0]
+
+    ret, _ = bpftool_prog_load("sample_map_ret0.o", "/sys/fs/bpf/nsimB_",
+                               dev=simB3['ifname'],
+                               maps=["idx 0 id %d" % (mapB)],
+                               fail=False)
+    fail(ret != 0, "couldn't reuse a map on the same ASIC")
+    rm("/sys/fs/bpf/nsimB_")
+
+    ret, _, err = bpftool_prog_load("sample_map_ret0.o", "/sys/fs/bpf/nsimA_",
+                                    dev=simA['ifname'],
+                                    maps=["idx 0 id %d" % (mapB)],
+                                    fail=False, include_stderr=True)
+    fail(ret == 0, "could reuse a map on a different ASIC")
+    fail(err.count("offload device mismatch between prog and map") == 0,
+         "error message missing for cross-ASIC map")
+
+    ret, _, err = bpftool_prog_load("sample_map_ret0.o", "/sys/fs/bpf/nsimB_",
+                                    dev=simB1['ifname'],
+                                    maps=["idx 0 id %d" % (mapA)],
+                                    fail=False, include_stderr=True)
+    fail(ret == 0, "could reuse a map on a different ASIC")
+    fail(err.count("offload device mismatch between prog and map") == 0,
+         "error message missing for cross-ASIC map")
+
+    start_test("Test multi-dev ASIC cross-dev destruction...")
+    bpftool_prog_list_wait(expected=2)
+
+    simA.remove()
+    bpftool_prog_list_wait(expected=1)
+
+    ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"]
+    fail(ifnameB != simB1['ifname'], "program not bound to originial device")
+    simB1.remove()
+    bpftool_prog_list_wait(expected=1)
+
+    start_test("Test multi-dev ASIC cross-dev destruction - move...")
+    ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"]
+    fail(ifnameB not in (simB2['ifname'], simB3['ifname']),
+         "program not bound to remaining devices")
+
+    simB2.remove()
+    ifnameB = bpftool("prog show %s" % (progB))[1]["dev"]["ifname"]
+    fail(ifnameB != simB3['ifname'], "program not bound to remaining device")
+
+    simB3.remove()
+    bpftool_prog_list_wait(expected=0)
+
+    start_test("Test multi-dev ASIC cross-dev destruction - orphaned...")
+    ret, out = bpftool("prog show %s" % (progB), fail=False)
+    fail(ret == 0, "got information about orphaned program")
+    fail("error" not in out, "no error reported for get info on orphaned")
+    fail(out["error"] != "can't get prog info: No such device",
+         "wrong error for get info on orphaned")
+
     print("%s: OK" % (os.path.basename(__file__)))
 
 finally:
diff --git a/tools/testing/selftests/bpf/test_select_reuseport.c b/tools/testing/selftests/bpf/test_select_reuseport.c
new file mode 100644
index 000000000000..75646d9b34aa
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_select_reuseport.c
@@ -0,0 +1,688 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Facebook */
+
+#include <stdlib.h>
+#include <unistd.h>
+#include <stdbool.h>
+#include <string.h>
+#include <errno.h>
+#include <assert.h>
+#include <fcntl.h>
+#include <linux/bpf.h>
+#include <linux/err.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+#include <sys/types.h>
+#include <sys/epoll.h>
+#include <sys/socket.h>
+#include <netinet/in.h>
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+#include "bpf_rlimit.h"
+#include "bpf_util.h"
+#include "test_select_reuseport_common.h"
+
+#define MIN_TCPHDR_LEN 20
+#define UDPHDR_LEN 8
+
+#define TCP_SYNCOOKIE_SYSCTL "/proc/sys/net/ipv4/tcp_syncookies"
+#define TCP_FO_SYSCTL "/proc/sys/net/ipv4/tcp_fastopen"
+#define REUSEPORT_ARRAY_SIZE 32
+
+static int result_map, tmp_index_ovr_map, linum_map, data_check_map;
+static enum result expected_results[NR_RESULTS];
+static int sk_fds[REUSEPORT_ARRAY_SIZE];
+static int reuseport_array, outer_map;
+static int select_by_skb_data_prog;
+static int saved_tcp_syncookie;
+static struct bpf_object *obj;
+static int saved_tcp_fo;
+static __u32 index_zero;
+static int epfd;
+
+static union sa46 {
+	struct sockaddr_in6 v6;
+	struct sockaddr_in v4;
+	sa_family_t family;
+} srv_sa;
+
+#define CHECK(condition, tag, format...) ({				\
+	int __ret = !!(condition);					\
+	if (__ret) {							\
+		printf("%s(%d):FAIL:%s ", __func__, __LINE__, tag);	\
+		printf(format);						\
+		exit(-1);						\
+	}								\
+})
+
+static void create_maps(void)
+{
+	struct bpf_create_map_attr attr = {};
+
+	/* Creating reuseport_array */
+	attr.name = "reuseport_array";
+	attr.map_type = BPF_MAP_TYPE_REUSEPORT_SOCKARRAY;
+	attr.key_size = sizeof(__u32);
+	attr.value_size = sizeof(__u32);
+	attr.max_entries = REUSEPORT_ARRAY_SIZE;
+
+	reuseport_array = bpf_create_map_xattr(&attr);
+	CHECK(reuseport_array == -1, "creating reuseport_array",
+	      "reuseport_array:%d errno:%d\n", reuseport_array, errno);
+
+	/* Creating outer_map */
+	attr.name = "outer_map";
+	attr.map_type = BPF_MAP_TYPE_ARRAY_OF_MAPS;
+	attr.key_size = sizeof(__u32);
+	attr.value_size = sizeof(__u32);
+	attr.max_entries = 1;
+	attr.inner_map_fd = reuseport_array;
+	outer_map = bpf_create_map_xattr(&attr);
+	CHECK(outer_map == -1, "creating outer_map",
+	      "outer_map:%d errno:%d\n", outer_map, errno);
+}
+
+static void prepare_bpf_obj(void)
+{
+	struct bpf_program *prog;
+	struct bpf_map *map;
+	int err;
+	struct bpf_object_open_attr attr = {
+		.file = "test_select_reuseport_kern.o",
+		.prog_type = BPF_PROG_TYPE_SK_REUSEPORT,
+	};
+
+	obj = bpf_object__open_xattr(&attr);
+	CHECK(IS_ERR_OR_NULL(obj), "open test_select_reuseport_kern.o",
+	      "obj:%p PTR_ERR(obj):%ld\n", obj, PTR_ERR(obj));
+
+	prog = bpf_program__next(NULL, obj);
+	CHECK(!prog, "get first bpf_program", "!prog\n");
+	bpf_program__set_type(prog, attr.prog_type);
+
+	map = bpf_object__find_map_by_name(obj, "outer_map");
+	CHECK(!map, "find outer_map", "!map\n");
+	err = bpf_map__reuse_fd(map, outer_map);
+	CHECK(err, "reuse outer_map", "err:%d\n", err);
+
+	err = bpf_object__load(obj);
+	CHECK(err, "load bpf_object", "err:%d\n", err);
+
+	select_by_skb_data_prog = bpf_program__fd(prog);
+	CHECK(select_by_skb_data_prog == -1, "get prog fd",
+	      "select_by_skb_data_prog:%d\n", select_by_skb_data_prog);
+
+	map = bpf_object__find_map_by_name(obj, "result_map");
+	CHECK(!map, "find result_map", "!map\n");
+	result_map = bpf_map__fd(map);
+	CHECK(result_map == -1, "get result_map fd",
+	      "result_map:%d\n", result_map);
+
+	map = bpf_object__find_map_by_name(obj, "tmp_index_ovr_map");
+	CHECK(!map, "find tmp_index_ovr_map", "!map\n");
+	tmp_index_ovr_map = bpf_map__fd(map);
+	CHECK(tmp_index_ovr_map == -1, "get tmp_index_ovr_map fd",
+	      "tmp_index_ovr_map:%d\n", tmp_index_ovr_map);
+
+	map = bpf_object__find_map_by_name(obj, "linum_map");
+	CHECK(!map, "find linum_map", "!map\n");
+	linum_map = bpf_map__fd(map);
+	CHECK(linum_map == -1, "get linum_map fd",
+	      "linum_map:%d\n", linum_map);
+
+	map = bpf_object__find_map_by_name(obj, "data_check_map");
+	CHECK(!map, "find data_check_map", "!map\n");
+	data_check_map = bpf_map__fd(map);
+	CHECK(data_check_map == -1, "get data_check_map fd",
+	      "data_check_map:%d\n", data_check_map);
+}
+
+static void sa46_init_loopback(union sa46 *sa, sa_family_t family)
+{
+	memset(sa, 0, sizeof(*sa));
+	sa->family = family;
+	if (sa->family == AF_INET6)
+		sa->v6.sin6_addr = in6addr_loopback;
+	else
+		sa->v4.sin_addr.s_addr = htonl(INADDR_LOOPBACK);
+}
+
+static void sa46_init_inany(union sa46 *sa, sa_family_t family)
+{
+	memset(sa, 0, sizeof(*sa));
+	sa->family = family;
+	if (sa->family == AF_INET6)
+		sa->v6.sin6_addr = in6addr_any;
+	else
+		sa->v4.sin_addr.s_addr = INADDR_ANY;
+}
+
+static int read_int_sysctl(const char *sysctl)
+{
+	char buf[16];
+	int fd, ret;
+
+	fd = open(sysctl, 0);
+	CHECK(fd == -1, "open(sysctl)", "sysctl:%s fd:%d errno:%d\n",
+	      sysctl, fd, errno);
+
+	ret = read(fd, buf, sizeof(buf));
+	CHECK(ret <= 0, "read(sysctl)", "sysctl:%s ret:%d errno:%d\n",
+	      sysctl, ret, errno);
+	close(fd);
+
+	return atoi(buf);
+}
+
+static void write_int_sysctl(const char *sysctl, int v)
+{
+	int fd, ret, size;
+	char buf[16];
+
+	fd = open(sysctl, O_RDWR);
+	CHECK(fd == -1, "open(sysctl)", "sysctl:%s fd:%d errno:%d\n",
+	      sysctl, fd, errno);
+
+	size = snprintf(buf, sizeof(buf), "%d", v);
+	ret = write(fd, buf, size);
+	CHECK(ret != size, "write(sysctl)",
+	      "sysctl:%s ret:%d size:%d errno:%d\n", sysctl, ret, size, errno);
+	close(fd);
+}
+
+static void restore_sysctls(void)
+{
+	write_int_sysctl(TCP_FO_SYSCTL, saved_tcp_fo);
+	write_int_sysctl(TCP_SYNCOOKIE_SYSCTL, saved_tcp_syncookie);
+}
+
+static void enable_fastopen(void)
+{
+	int fo;
+
+	fo = read_int_sysctl(TCP_FO_SYSCTL);
+	write_int_sysctl(TCP_FO_SYSCTL, fo | 7);
+}
+
+static void enable_syncookie(void)
+{
+	write_int_sysctl(TCP_SYNCOOKIE_SYSCTL, 2);
+}
+
+static void disable_syncookie(void)
+{
+	write_int_sysctl(TCP_SYNCOOKIE_SYSCTL, 0);
+}
+
+static __u32 get_linum(void)
+{
+	__u32 linum;
+	int err;
+
+	err = bpf_map_lookup_elem(linum_map, &index_zero, &linum);
+	CHECK(err == -1, "lookup_elem(linum_map)", "err:%d errno:%d\n",
+	      err, errno);
+
+	return linum;
+}
+
+static void check_data(int type, sa_family_t family, const struct cmd *cmd,
+		       int cli_fd)
+{
+	struct data_check expected = {}, result;
+	union sa46 cli_sa;
+	socklen_t addrlen;
+	int err;
+
+	addrlen = sizeof(cli_sa);
+	err = getsockname(cli_fd, (struct sockaddr *)&cli_sa,
+			  &addrlen);
+	CHECK(err == -1, "getsockname(cli_fd)", "err:%d errno:%d\n",
+	      err, errno);
+
+	err = bpf_map_lookup_elem(data_check_map, &index_zero, &result);
+	CHECK(err == -1, "lookup_elem(data_check_map)", "err:%d errno:%d\n",
+	      err, errno);
+
+	if (type == SOCK_STREAM) {
+		expected.len = MIN_TCPHDR_LEN;
+		expected.ip_protocol = IPPROTO_TCP;
+	} else {
+		expected.len = UDPHDR_LEN;
+		expected.ip_protocol = IPPROTO_UDP;
+	}
+
+	if (family == AF_INET6) {
+		expected.eth_protocol = htons(ETH_P_IPV6);
+		expected.bind_inany = !srv_sa.v6.sin6_addr.s6_addr32[3] &&
+			!srv_sa.v6.sin6_addr.s6_addr32[2] &&
+			!srv_sa.v6.sin6_addr.s6_addr32[1] &&
+			!srv_sa.v6.sin6_addr.s6_addr32[0];
+
+		memcpy(&expected.skb_addrs[0], cli_sa.v6.sin6_addr.s6_addr32,
+		       sizeof(cli_sa.v6.sin6_addr));
+		memcpy(&expected.skb_addrs[4], &in6addr_loopback,
+		       sizeof(in6addr_loopback));
+		expected.skb_ports[0] = cli_sa.v6.sin6_port;
+		expected.skb_ports[1] = srv_sa.v6.sin6_port;
+	} else {
+		expected.eth_protocol = htons(ETH_P_IP);
+		expected.bind_inany = !srv_sa.v4.sin_addr.s_addr;
+
+		expected.skb_addrs[0] = cli_sa.v4.sin_addr.s_addr;
+		expected.skb_addrs[1] = htonl(INADDR_LOOPBACK);
+		expected.skb_ports[0] = cli_sa.v4.sin_port;
+		expected.skb_ports[1] = srv_sa.v4.sin_port;
+	}
+
+	if (memcmp(&result, &expected, offsetof(struct data_check,
+						equal_check_end))) {
+		printf("unexpected data_check\n");
+		printf("  result: (0x%x, %u, %u)\n",
+		       result.eth_protocol, result.ip_protocol,
+		       result.bind_inany);
+		printf("expected: (0x%x, %u, %u)\n",
+		       expected.eth_protocol, expected.ip_protocol,
+		       expected.bind_inany);
+		CHECK(1, "data_check result != expected",
+		      "bpf_prog_linum:%u\n", get_linum());
+	}
+
+	CHECK(!result.hash, "data_check result.hash empty",
+	      "result.hash:%u", result.hash);
+
+	expected.len += cmd ? sizeof(*cmd) : 0;
+	if (type == SOCK_STREAM)
+		CHECK(expected.len > result.len, "expected.len > result.len",
+		      "expected.len:%u result.len:%u bpf_prog_linum:%u\n",
+		      expected.len, result.len, get_linum());
+	else
+		CHECK(expected.len != result.len, "expected.len != result.len",
+		      "expected.len:%u result.len:%u bpf_prog_linum:%u\n",
+		      expected.len, result.len, get_linum());
+}
+
+static void check_results(void)
+{
+	__u32 results[NR_RESULTS];
+	__u32 i, broken = 0;
+	int err;
+
+	for (i = 0; i < NR_RESULTS; i++) {
+		err = bpf_map_lookup_elem(result_map, &i, &results[i]);
+		CHECK(err == -1, "lookup_elem(result_map)",
+		      "i:%u err:%d errno:%d\n", i, err, errno);
+	}
+
+	for (i = 0; i < NR_RESULTS; i++) {
+		if (results[i] != expected_results[i]) {
+			broken = i;
+			break;
+		}
+	}
+
+	if (i == NR_RESULTS)
+		return;
+
+	printf("unexpected result\n");
+	printf(" result: [");
+	printf("%u", results[0]);
+	for (i = 1; i < NR_RESULTS; i++)
+		printf(", %u", results[i]);
+	printf("]\n");
+
+	printf("expected: [");
+	printf("%u", expected_results[0]);
+	for (i = 1; i < NR_RESULTS; i++)
+		printf(", %u", expected_results[i]);
+	printf("]\n");
+
+	CHECK(expected_results[broken] != results[broken],
+	      "unexpected result",
+	      "expected_results[%u] != results[%u] bpf_prog_linum:%u\n",
+	      broken, broken, get_linum());
+}
+
+static int send_data(int type, sa_family_t family, void *data, size_t len,
+		     enum result expected)
+{
+	union sa46 cli_sa;
+	int fd, err;
+
+	fd = socket(family, type, 0);
+	CHECK(fd == -1, "socket()", "fd:%d errno:%d\n", fd, errno);
+
+	sa46_init_loopback(&cli_sa, family);
+	err = bind(fd, (struct sockaddr *)&cli_sa, sizeof(cli_sa));
+	CHECK(fd == -1, "bind(cli_sa)", "err:%d errno:%d\n", err, errno);
+
+	err = sendto(fd, data, len, MSG_FASTOPEN, (struct sockaddr *)&srv_sa,
+		     sizeof(srv_sa));
+	CHECK(err != len && expected >= PASS,
+	      "sendto()", "family:%u err:%d errno:%d expected:%d\n",
+	      family, err, errno, expected);
+
+	return fd;
+}
+
+static void do_test(int type, sa_family_t family, struct cmd *cmd,
+		    enum result expected)
+{
+	int nev, srv_fd, cli_fd;
+	struct epoll_event ev;
+	struct cmd rcv_cmd;
+	ssize_t nread;
+
+	cli_fd = send_data(type, family, cmd, cmd ? sizeof(*cmd) : 0,
+			   expected);
+	nev = epoll_wait(epfd, &ev, 1, expected >= PASS ? 5 : 0);
+	CHECK((nev <= 0 && expected >= PASS) ||
+	      (nev > 0 && expected < PASS),
+	      "nev <> expected",
+	      "nev:%d expected:%d type:%d family:%d data:(%d, %d)\n",
+	      nev, expected, type, family,
+	      cmd ? cmd->reuseport_index : -1,
+	      cmd ? cmd->pass_on_failure : -1);
+	check_results();
+	check_data(type, family, cmd, cli_fd);
+
+	if (expected < PASS)
+		return;
+
+	CHECK(expected != PASS_ERR_SK_SELECT_REUSEPORT &&
+	      cmd->reuseport_index != ev.data.u32,
+	      "check cmd->reuseport_index",
+	      "cmd:(%u, %u) ev.data.u32:%u\n",
+	      cmd->pass_on_failure, cmd->reuseport_index, ev.data.u32);
+
+	srv_fd = sk_fds[ev.data.u32];
+	if (type == SOCK_STREAM) {
+		int new_fd = accept(srv_fd, NULL, 0);
+
+		CHECK(new_fd == -1, "accept(srv_fd)",
+		      "ev.data.u32:%u new_fd:%d errno:%d\n",
+		      ev.data.u32, new_fd, errno);
+
+		nread = recv(new_fd, &rcv_cmd, sizeof(rcv_cmd), MSG_DONTWAIT);
+		CHECK(nread != sizeof(rcv_cmd),
+		      "recv(new_fd)",
+		      "ev.data.u32:%u nread:%zd sizeof(rcv_cmd):%zu errno:%d\n",
+		      ev.data.u32, nread, sizeof(rcv_cmd), errno);
+
+		close(new_fd);
+	} else {
+		nread = recv(srv_fd, &rcv_cmd, sizeof(rcv_cmd), MSG_DONTWAIT);
+		CHECK(nread != sizeof(rcv_cmd),
+		      "recv(sk_fds)",
+		      "ev.data.u32:%u nread:%zd sizeof(rcv_cmd):%zu errno:%d\n",
+		      ev.data.u32, nread, sizeof(rcv_cmd), errno);
+	}
+
+	close(cli_fd);
+}
+
+static void test_err_inner_map(int type, sa_family_t family)
+{
+	struct cmd cmd = {
+		.reuseport_index = 0,
+		.pass_on_failure = 0,
+	};
+
+	printf("%s: ", __func__);
+	expected_results[DROP_ERR_INNER_MAP]++;
+	do_test(type, family, &cmd, DROP_ERR_INNER_MAP);
+	printf("OK\n");
+}
+
+static void test_err_skb_data(int type, sa_family_t family)
+{
+	printf("%s: ", __func__);
+	expected_results[DROP_ERR_SKB_DATA]++;
+	do_test(type, family, NULL, DROP_ERR_SKB_DATA);
+	printf("OK\n");
+}
+
+static void test_err_sk_select_port(int type, sa_family_t family)
+{
+	struct cmd cmd = {
+		.reuseport_index = REUSEPORT_ARRAY_SIZE,
+		.pass_on_failure = 0,
+	};
+
+	printf("%s: ", __func__);
+	expected_results[DROP_ERR_SK_SELECT_REUSEPORT]++;
+	do_test(type, family, &cmd, DROP_ERR_SK_SELECT_REUSEPORT);
+	printf("OK\n");
+}
+
+static void test_pass(int type, sa_family_t family)
+{
+	struct cmd cmd;
+	int i;
+
+	printf("%s: ", __func__);
+	cmd.pass_on_failure = 0;
+	for (i = 0; i < REUSEPORT_ARRAY_SIZE; i++) {
+		expected_results[PASS]++;
+		cmd.reuseport_index = i;
+		do_test(type, family, &cmd, PASS);
+	}
+	printf("OK\n");
+}
+
+static void test_syncookie(int type, sa_family_t family)
+{
+	int err, tmp_index = 1;
+	struct cmd cmd = {
+		.reuseport_index = 0,
+		.pass_on_failure = 0,
+	};
+
+	if (type != SOCK_STREAM)
+		return;
+
+	printf("%s: ", __func__);
+	/*
+	 * +1 for TCP-SYN and
+	 * +1 for the TCP-ACK (ack the syncookie)
+	 */
+	expected_results[PASS] += 2;
+	enable_syncookie();
+	/*
+	 * Simulate TCP-SYN and TCP-ACK are handled by two different sk:
+	 * TCP-SYN: select sk_fds[tmp_index = 1] tmp_index is from the
+	 *          tmp_index_ovr_map
+	 * TCP-ACK: select sk_fds[reuseport_index = 0] reuseport_index
+	 *          is from the cmd.reuseport_index
+	 */
+	err = bpf_map_update_elem(tmp_index_ovr_map, &index_zero,
+				  &tmp_index, BPF_ANY);
+	CHECK(err == -1, "update_elem(tmp_index_ovr_map, 0, 1)",
+	      "err:%d errno:%d\n", err, errno);
+	do_test(type, family, &cmd, PASS);
+	err = bpf_map_lookup_elem(tmp_index_ovr_map, &index_zero,
+				  &tmp_index);
+	CHECK(err == -1 || tmp_index != -1,
+	      "lookup_elem(tmp_index_ovr_map)",
+	      "err:%d errno:%d tmp_index:%d\n",
+	      err, errno, tmp_index);
+	disable_syncookie();
+	printf("OK\n");
+}
+
+static void test_pass_on_err(int type, sa_family_t family)
+{
+	struct cmd cmd = {
+		.reuseport_index = REUSEPORT_ARRAY_SIZE,
+		.pass_on_failure = 1,
+	};
+
+	printf("%s: ", __func__);
+	expected_results[PASS_ERR_SK_SELECT_REUSEPORT] += 1;
+	do_test(type, family, &cmd, PASS_ERR_SK_SELECT_REUSEPORT);
+	printf("OK\n");
+}
+
+static void prepare_sk_fds(int type, sa_family_t family, bool inany)
+{
+	const int first = REUSEPORT_ARRAY_SIZE - 1;
+	int i, err, optval = 1;
+	struct epoll_event ev;
+	socklen_t addrlen;
+
+	if (inany)
+		sa46_init_inany(&srv_sa, family);
+	else
+		sa46_init_loopback(&srv_sa, family);
+	addrlen = sizeof(srv_sa);
+
+	/*
+	 * The sk_fds[] is filled from the back such that the order
+	 * is exactly opposite to the (struct sock_reuseport *)reuse->socks[].
+	 */
+	for (i = first; i >= 0; i--) {
+		sk_fds[i] = socket(family, type, 0);
+		CHECK(sk_fds[i] == -1, "socket()", "sk_fds[%d]:%d errno:%d\n",
+		      i, sk_fds[i], errno);
+		err = setsockopt(sk_fds[i], SOL_SOCKET, SO_REUSEPORT,
+				 &optval, sizeof(optval));
+		CHECK(err == -1, "setsockopt(SO_REUSEPORT)",
+		      "sk_fds[%d] err:%d errno:%d\n",
+		      i, err, errno);
+
+		if (i == first) {
+			err = setsockopt(sk_fds[i], SOL_SOCKET,
+					 SO_ATTACH_REUSEPORT_EBPF,
+					 &select_by_skb_data_prog,
+					 sizeof(select_by_skb_data_prog));
+			CHECK(err == -1, "setsockopt(SO_ATTACH_REUEPORT_EBPF)",
+			      "err:%d errno:%d\n", err, errno);
+		}
+
+		err = bind(sk_fds[i], (struct sockaddr *)&srv_sa, addrlen);
+		CHECK(err == -1, "bind()", "sk_fds[%d] err:%d errno:%d\n",
+		      i, err, errno);
+
+		if (type == SOCK_STREAM) {
+			err = listen(sk_fds[i], 10);
+			CHECK(err == -1, "listen()",
+			      "sk_fds[%d] err:%d errno:%d\n",
+			      i, err, errno);
+		}
+
+		err = bpf_map_update_elem(reuseport_array, &i, &sk_fds[i],
+					  BPF_NOEXIST);
+		CHECK(err == -1, "update_elem(reuseport_array)",
+		      "sk_fds[%d] err:%d errno:%d\n", i, err, errno);
+
+		if (i == first) {
+			socklen_t addrlen = sizeof(srv_sa);
+
+			err = getsockname(sk_fds[i], (struct sockaddr *)&srv_sa,
+					  &addrlen);
+			CHECK(err == -1, "getsockname()",
+			      "sk_fds[%d] err:%d errno:%d\n", i, err, errno);
+		}
+	}
+
+	epfd = epoll_create(1);
+	CHECK(epfd == -1, "epoll_create(1)",
+	      "epfd:%d errno:%d\n", epfd, errno);
+
+	ev.events = EPOLLIN;
+	for (i = 0; i < REUSEPORT_ARRAY_SIZE; i++) {
+		ev.data.u32 = i;
+		err = epoll_ctl(epfd, EPOLL_CTL_ADD, sk_fds[i], &ev);
+		CHECK(err, "epoll_ctl(EPOLL_CTL_ADD)", "sk_fds[%d]\n", i);
+	}
+}
+
+static void setup_per_test(int type, unsigned short family, bool inany)
+{
+	int ovr = -1, err;
+
+	prepare_sk_fds(type, family, inany);
+	err = bpf_map_update_elem(tmp_index_ovr_map, &index_zero, &ovr,
+				  BPF_ANY);
+	CHECK(err == -1, "update_elem(tmp_index_ovr_map, 0, -1)",
+	      "err:%d errno:%d\n", err, errno);
+}
+
+static void cleanup_per_test(void)
+{
+	int i, err;
+
+	for (i = 0; i < REUSEPORT_ARRAY_SIZE; i++)
+		close(sk_fds[i]);
+	close(epfd);
+
+	err = bpf_map_delete_elem(outer_map, &index_zero);
+	CHECK(err == -1, "delete_elem(outer_map)",
+	      "err:%d errno:%d\n", err, errno);
+}
+
+static void cleanup(void)
+{
+	close(outer_map);
+	close(reuseport_array);
+	bpf_object__close(obj);
+}
+
+static void test_all(void)
+{
+	/* Extra SOCK_STREAM to test bind_inany==true */
+	const int types[] = { SOCK_STREAM, SOCK_DGRAM, SOCK_STREAM };
+	const char * const type_strings[] = { "TCP", "UDP", "TCP" };
+	const char * const family_strings[] = { "IPv6", "IPv4" };
+	const unsigned short families[] = { AF_INET6, AF_INET };
+	const bool bind_inany[] = { false, false, true };
+	int t, f, err;
+
+	for (f = 0; f < ARRAY_SIZE(families); f++) {
+		unsigned short family = families[f];
+
+		for (t = 0; t < ARRAY_SIZE(types); t++) {
+			bool inany = bind_inany[t];
+			int type = types[t];
+
+			printf("######## %s/%s %s ########\n",
+			       family_strings[f], type_strings[t],
+				inany ? " INANY  " : "LOOPBACK");
+
+			setup_per_test(type, family, inany);
+
+			test_err_inner_map(type, family);
+
+			/* Install reuseport_array to the outer_map */
+			err = bpf_map_update_elem(outer_map, &index_zero,
+						  &reuseport_array, BPF_ANY);
+			CHECK(err == -1, "update_elem(outer_map)",
+			      "err:%d errno:%d\n", err, errno);
+
+			test_err_skb_data(type, family);
+			test_err_sk_select_port(type, family);
+			test_pass(type, family);
+			test_syncookie(type, family);
+			test_pass_on_err(type, family);
+
+			cleanup_per_test();
+			printf("\n");
+		}
+	}
+}
+
+int main(int argc, const char **argv)
+{
+	create_maps();
+	prepare_bpf_obj();
+	saved_tcp_fo = read_int_sysctl(TCP_FO_SYSCTL);
+	saved_tcp_syncookie = read_int_sysctl(TCP_SYNCOOKIE_SYSCTL);
+	enable_fastopen();
+	disable_syncookie();
+	atexit(restore_sysctls);
+
+	test_all();
+
+	cleanup();
+	return 0;
+}
diff --git a/tools/testing/selftests/bpf/test_select_reuseport_common.h b/tools/testing/selftests/bpf/test_select_reuseport_common.h
new file mode 100644
index 000000000000..08eb2a9f145f
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_select_reuseport_common.h
@@ -0,0 +1,36 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (c) 2018 Facebook */
+
+#ifndef __TEST_SELECT_REUSEPORT_COMMON_H
+#define __TEST_SELECT_REUSEPORT_COMMON_H
+
+#include <linux/types.h>
+
+enum result {
+	DROP_ERR_INNER_MAP,
+	DROP_ERR_SKB_DATA,
+	DROP_ERR_SK_SELECT_REUSEPORT,
+	DROP_MISC,
+	PASS,
+	PASS_ERR_SK_SELECT_REUSEPORT,
+	NR_RESULTS,
+};
+
+struct cmd {
+	__u32 reuseport_index;
+	__u32 pass_on_failure;
+};
+
+struct data_check {
+	__u32 ip_protocol;
+	__u32 skb_addrs[8];
+	__u16 skb_ports[2];
+	__u16 eth_protocol;
+	__u8  bind_inany;
+	__u8  equal_check_end[0];
+
+	__u32 len;
+	__u32 hash;
+};
+
+#endif
diff --git a/tools/testing/selftests/bpf/test_select_reuseport_kern.c b/tools/testing/selftests/bpf/test_select_reuseport_kern.c
new file mode 100644
index 000000000000..5b54ec637ada
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_select_reuseport_kern.c
@@ -0,0 +1,180 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Copyright (c) 2018 Facebook */
+
+#include <stdlib.h>
+#include <linux/in.h>
+#include <linux/ip.h>
+#include <linux/ipv6.h>
+#include <linux/tcp.h>
+#include <linux/udp.h>
+#include <linux/bpf.h>
+#include <linux/types.h>
+#include <linux/if_ether.h>
+
+#include "bpf_endian.h"
+#include "bpf_helpers.h"
+#include "test_select_reuseport_common.h"
+
+int _version SEC("version") = 1;
+
+#ifndef offsetof
+#define offsetof(TYPE, MEMBER) ((size_t) &((TYPE *)0)->MEMBER)
+#endif
+
+struct bpf_map_def SEC("maps") outer_map = {
+	.type = BPF_MAP_TYPE_ARRAY_OF_MAPS,
+	.key_size = sizeof(__u32),
+	.value_size = sizeof(__u32),
+	.max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps") result_map = {
+	.type = BPF_MAP_TYPE_ARRAY,
+	.key_size = sizeof(__u32),
+	.value_size = sizeof(__u32),
+	.max_entries = NR_RESULTS,
+};
+
+struct bpf_map_def SEC("maps") tmp_index_ovr_map = {
+	.type = BPF_MAP_TYPE_ARRAY,
+	.key_size = sizeof(__u32),
+	.value_size = sizeof(int),
+	.max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps") linum_map = {
+	.type = BPF_MAP_TYPE_ARRAY,
+	.key_size = sizeof(__u32),
+	.value_size = sizeof(__u32),
+	.max_entries = 1,
+};
+
+struct bpf_map_def SEC("maps") data_check_map = {
+	.type = BPF_MAP_TYPE_ARRAY,
+	.key_size = sizeof(__u32),
+	.value_size = sizeof(struct data_check),
+	.max_entries = 1,
+};
+
+#define GOTO_DONE(_result) ({			\
+	result = (_result);			\
+	linum = __LINE__;			\
+	goto done;				\
+})
+
+SEC("select_by_skb_data")
+int _select_by_skb_data(struct sk_reuseport_md *reuse_md)
+{
+	__u32 linum, index = 0, flags = 0, index_zero = 0;
+	__u32 *result_cnt, *linum_value;
+	struct data_check data_check = {};
+	struct cmd *cmd, cmd_copy;
+	void *data, *data_end;
+	void *reuseport_array;
+	enum result result;
+	int *index_ovr;
+	int err;
+
+	data = reuse_md->data;
+	data_end = reuse_md->data_end;
+	data_check.len = reuse_md->len;
+	data_check.eth_protocol = reuse_md->eth_protocol;
+	data_check.ip_protocol = reuse_md->ip_protocol;
+	data_check.hash = reuse_md->hash;
+	data_check.bind_inany = reuse_md->bind_inany;
+	if (data_check.eth_protocol == bpf_htons(ETH_P_IP)) {
+		if (bpf_skb_load_bytes_relative(reuse_md,
+						offsetof(struct iphdr, saddr),
+						data_check.skb_addrs, 8,
+						BPF_HDR_START_NET))
+			GOTO_DONE(DROP_MISC);
+	} else {
+		if (bpf_skb_load_bytes_relative(reuse_md,
+						offsetof(struct ipv6hdr, saddr),
+						data_check.skb_addrs, 32,
+						BPF_HDR_START_NET))
+			GOTO_DONE(DROP_MISC);
+	}
+
+	/*
+	 * The ip_protocol could be a compile time decision
+	 * if the bpf_prog.o is dedicated to either TCP or
+	 * UDP.
+	 *
+	 * Otherwise, reuse_md->ip_protocol or
+	 * the protocol field in the iphdr can be used.
+	 */
+	if (data_check.ip_protocol == IPPROTO_TCP) {
+		struct tcphdr *th = data;
+
+		if (th + 1 > data_end)
+			GOTO_DONE(DROP_MISC);
+
+		data_check.skb_ports[0] = th->source;
+		data_check.skb_ports[1] = th->dest;
+
+		if ((th->doff << 2) + sizeof(*cmd) > data_check.len)
+			GOTO_DONE(DROP_ERR_SKB_DATA);
+		if (bpf_skb_load_bytes(reuse_md, th->doff << 2, &cmd_copy,
+				       sizeof(cmd_copy)))
+			GOTO_DONE(DROP_MISC);
+		cmd = &cmd_copy;
+	} else if (data_check.ip_protocol == IPPROTO_UDP) {
+		struct udphdr *uh = data;
+
+		if (uh + 1 > data_end)
+			GOTO_DONE(DROP_MISC);
+
+		data_check.skb_ports[0] = uh->source;
+		data_check.skb_ports[1] = uh->dest;
+
+		if (sizeof(struct udphdr) + sizeof(*cmd) > data_check.len)
+			GOTO_DONE(DROP_ERR_SKB_DATA);
+		if (data + sizeof(struct udphdr) + sizeof(*cmd) > data_end) {
+			if (bpf_skb_load_bytes(reuse_md, sizeof(struct udphdr),
+					       &cmd_copy, sizeof(cmd_copy)))
+				GOTO_DONE(DROP_MISC);
+			cmd = &cmd_copy;
+		} else {
+			cmd = data + sizeof(struct udphdr);
+		}
+	} else {
+		GOTO_DONE(DROP_MISC);
+	}
+
+	reuseport_array = bpf_map_lookup_elem(&outer_map, &index_zero);
+	if (!reuseport_array)
+		GOTO_DONE(DROP_ERR_INNER_MAP);
+
+	index = cmd->reuseport_index;
+	index_ovr = bpf_map_lookup_elem(&tmp_index_ovr_map, &index_zero);
+	if (!index_ovr)
+		GOTO_DONE(DROP_MISC);
+
+	if (*index_ovr != -1) {
+		index = *index_ovr;
+		*index_ovr = -1;
+	}
+	err = bpf_sk_select_reuseport(reuse_md, reuseport_array, &index,
+				      flags);
+	if (!err)
+		GOTO_DONE(PASS);
+
+	if (cmd->pass_on_failure)
+		GOTO_DONE(PASS_ERR_SK_SELECT_REUSEPORT);
+	else
+		GOTO_DONE(DROP_ERR_SK_SELECT_REUSEPORT);
+
+done:
+	result_cnt = bpf_map_lookup_elem(&result_map, &result);
+	if (!result_cnt)
+		return SK_DROP;
+
+	bpf_map_update_elem(&linum_map, &index_zero, &linum, BPF_ANY);
+	bpf_map_update_elem(&data_check_map, &index_zero, &data_check, BPF_ANY);
+
+	(*result_cnt)++;
+	return result < PASS ? SK_DROP : SK_PASS;
+}
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_skb_cgroup_id.sh b/tools/testing/selftests/bpf/test_skb_cgroup_id.sh
new file mode 100755
index 000000000000..42544a969abc
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_skb_cgroup_id.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+# SPDX-License-Identifier: GPL-2.0
+# Copyright (c) 2018 Facebook
+
+set -eu
+
+wait_for_ip()
+{
+	local _i
+	echo -n "Wait for testing link-local IP to become available "
+	for _i in $(seq ${MAX_PING_TRIES}); do
+		echo -n "."
+		if ping -6 -q -c 1 -W 1 ff02::1%${TEST_IF} >/dev/null 2>&1; then
+			echo " OK"
+			return
+		fi
+		sleep 1
+	done
+	echo 1>&2 "ERROR: Timeout waiting for test IP to become available."
+	exit 1
+}
+
+setup()
+{
+	# Create testing interfaces not to interfere with current environment.
+	ip link add dev ${TEST_IF} type veth peer name ${TEST_IF_PEER}
+	ip link set ${TEST_IF} up
+	ip link set ${TEST_IF_PEER} up
+
+	wait_for_ip
+
+	tc qdisc add dev ${TEST_IF} clsact
+	tc filter add dev ${TEST_IF} egress bpf obj ${BPF_PROG_OBJ} \
+		sec ${BPF_PROG_SECTION} da
+
+	BPF_PROG_ID=$(tc filter show dev ${TEST_IF} egress | \
+			awk '/ id / {sub(/.* id /, "", $0); print($1)}')
+}
+
+cleanup()
+{
+	ip link del ${TEST_IF} 2>/dev/null || :
+	ip link del ${TEST_IF_PEER} 2>/dev/null || :
+}
+
+main()
+{
+	trap cleanup EXIT 2 3 6 15
+	setup
+	${PROG} ${TEST_IF} ${BPF_PROG_ID}
+}
+
+DIR=$(dirname $0)
+TEST_IF="test_cgid_1"
+TEST_IF_PEER="test_cgid_2"
+MAX_PING_TRIES=5
+BPF_PROG_OBJ="${DIR}/test_skb_cgroup_id_kern.o"
+BPF_PROG_SECTION="cgroup_id_logger"
+BPF_PROG_ID=0
+PROG="${DIR}/test_skb_cgroup_id_user"
+
+main
diff --git a/tools/testing/selftests/bpf/test_skb_cgroup_id_kern.c b/tools/testing/selftests/bpf/test_skb_cgroup_id_kern.c
new file mode 100644
index 000000000000..68cf9829f5a7
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_skb_cgroup_id_kern.c
@@ -0,0 +1,47 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Facebook
+
+#include <linux/bpf.h>
+#include <linux/pkt_cls.h>
+
+#include <string.h>
+
+#include "bpf_helpers.h"
+
+#define NUM_CGROUP_LEVELS	4
+
+struct bpf_map_def SEC("maps") cgroup_ids = {
+	.type = BPF_MAP_TYPE_ARRAY,
+	.key_size = sizeof(__u32),
+	.value_size = sizeof(__u64),
+	.max_entries = NUM_CGROUP_LEVELS,
+};
+
+static __always_inline void log_nth_level(struct __sk_buff *skb, __u32 level)
+{
+	__u64 id;
+
+	/* [1] &level passed to external function that may change it, it's
+	 *     incompatible with loop unroll.
+	 */
+	id = bpf_skb_ancestor_cgroup_id(skb, level);
+	bpf_map_update_elem(&cgroup_ids, &level, &id, 0);
+}
+
+SEC("cgroup_id_logger")
+int log_cgroup_id(struct __sk_buff *skb)
+{
+	/* Loop unroll can't be used here due to [1]. Unrolling manually.
+	 * Number of calls should be in sync with NUM_CGROUP_LEVELS.
+	 */
+	log_nth_level(skb, 0);
+	log_nth_level(skb, 1);
+	log_nth_level(skb, 2);
+	log_nth_level(skb, 3);
+
+	return TC_ACT_OK;
+}
+
+int _version SEC("version") = 1;
+
+char _license[] SEC("license") = "GPL";
diff --git a/tools/testing/selftests/bpf/test_skb_cgroup_id_user.c b/tools/testing/selftests/bpf/test_skb_cgroup_id_user.c
new file mode 100644
index 000000000000..c121cc59f314
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_skb_cgroup_id_user.c
@@ -0,0 +1,187 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Facebook
+
+#include <stdlib.h>
+#include <string.h>
+#include <unistd.h>
+
+#include <arpa/inet.h>
+#include <net/if.h>
+#include <netinet/in.h>
+#include <sys/socket.h>
+#include <sys/types.h>
+
+
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+
+#include "bpf_rlimit.h"
+#include "cgroup_helpers.h"
+
+#define CGROUP_PATH		"/skb_cgroup_test"
+#define NUM_CGROUP_LEVELS	4
+
+/* RFC 4291, Section 2.7.1 */
+#define LINKLOCAL_MULTICAST	"ff02::1"
+
+static int mk_dst_addr(const char *ip, const char *iface,
+		       struct sockaddr_in6 *dst)
+{
+	memset(dst, 0, sizeof(*dst));
+
+	dst->sin6_family = AF_INET6;
+	dst->sin6_port = htons(1025);
+
+	if (inet_pton(AF_INET6, ip, &dst->sin6_addr) != 1) {
+		log_err("Invalid IPv6: %s", ip);
+		return -1;
+	}
+
+	dst->sin6_scope_id = if_nametoindex(iface);
+	if (!dst->sin6_scope_id) {
+		log_err("Failed to get index of iface: %s", iface);
+		return -1;
+	}
+
+	return 0;
+}
+
+static int send_packet(const char *iface)
+{
+	struct sockaddr_in6 dst;
+	char msg[] = "msg";
+	int err = 0;
+	int fd = -1;
+
+	if (mk_dst_addr(LINKLOCAL_MULTICAST, iface, &dst))
+		goto err;
+
+	fd = socket(AF_INET6, SOCK_DGRAM, 0);
+	if (fd == -1) {
+		log_err("Failed to create UDP socket");
+		goto err;
+	}
+
+	if (sendto(fd, &msg, sizeof(msg), 0, (const struct sockaddr *)&dst,
+		   sizeof(dst)) == -1) {
+		log_err("Failed to send datagram");
+		goto err;
+	}
+
+	goto out;
+err:
+	err = -1;
+out:
+	if (fd >= 0)
+		close(fd);
+	return err;
+}
+
+int get_map_fd_by_prog_id(int prog_id)
+{
+	struct bpf_prog_info info = {};
+	__u32 info_len = sizeof(info);
+	__u32 map_ids[1];
+	int prog_fd = -1;
+	int map_fd = -1;
+
+	prog_fd = bpf_prog_get_fd_by_id(prog_id);
+	if (prog_fd < 0) {
+		log_err("Failed to get fd by prog id %d", prog_id);
+		goto err;
+	}
+
+	info.nr_map_ids = 1;
+	info.map_ids = (__u64) (unsigned long) map_ids;
+
+	if (bpf_obj_get_info_by_fd(prog_fd, &info, &info_len)) {
+		log_err("Failed to get info by prog fd %d", prog_fd);
+		goto err;
+	}
+
+	if (!info.nr_map_ids) {
+		log_err("No maps found for prog fd %d", prog_fd);
+		goto err;
+	}
+
+	map_fd = bpf_map_get_fd_by_id(map_ids[0]);
+	if (map_fd < 0)
+		log_err("Failed to get fd by map id %d", map_ids[0]);
+err:
+	if (prog_fd >= 0)
+		close(prog_fd);
+	return map_fd;
+}
+
+int check_ancestor_cgroup_ids(int prog_id)
+{
+	__u64 actual_ids[NUM_CGROUP_LEVELS], expected_ids[NUM_CGROUP_LEVELS];
+	__u32 level;
+	int err = 0;
+	int map_fd;
+
+	expected_ids[0] = 0x100000001;	/* root cgroup */
+	expected_ids[1] = get_cgroup_id("");
+	expected_ids[2] = get_cgroup_id(CGROUP_PATH);
+	expected_ids[3] = 0; /* non-existent cgroup */
+
+	map_fd = get_map_fd_by_prog_id(prog_id);
+	if (map_fd < 0)
+		goto err;
+
+	for (level = 0; level < NUM_CGROUP_LEVELS; ++level) {
+		if (bpf_map_lookup_elem(map_fd, &level, &actual_ids[level])) {
+			log_err("Failed to lookup key %d", level);
+			goto err;
+		}
+		if (actual_ids[level] != expected_ids[level]) {
+			log_err("%llx (actual) != %llx (expected), level: %u\n",
+				actual_ids[level], expected_ids[level], level);
+			goto err;
+		}
+	}
+
+	goto out;
+err:
+	err = -1;
+out:
+	if (map_fd >= 0)
+		close(map_fd);
+	return err;
+}
+
+int main(int argc, char **argv)
+{
+	int cgfd = -1;
+	int err = 0;
+
+	if (argc < 3) {
+		fprintf(stderr, "Usage: %s iface prog_id\n", argv[0]);
+		exit(EXIT_FAILURE);
+	}
+
+	if (setup_cgroup_environment())
+		goto err;
+
+	cgfd = create_and_get_cgroup(CGROUP_PATH);
+	if (!cgfd)
+		goto err;
+
+	if (join_cgroup(CGROUP_PATH))
+		goto err;
+
+	if (send_packet(argv[1]))
+		goto err;
+
+	if (check_ancestor_cgroup_ids(atoi(argv[2])))
+		goto err;
+
+	goto out;
+err:
+	err = -1;
+out:
+	close(cgfd);
+	cleanup_cgroup_environment();
+	printf("[%s]\n", err ? "FAIL" : "PASS");
+	return err;
+}
diff --git a/tools/testing/selftests/bpf/test_sock.c b/tools/testing/selftests/bpf/test_sock.c
index f4d99fabc56d..b8ebe2f58074 100644
--- a/tools/testing/selftests/bpf/test_sock.c
+++ b/tools/testing/selftests/bpf/test_sock.c
@@ -14,10 +14,7 @@
 
 #include "cgroup_helpers.h"
 #include "bpf_rlimit.h"
-
-#ifndef ARRAY_SIZE
-# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#endif
+#include "bpf_util.h"
 
 #define CG_PATH		"/foo"
 #define MAX_INSNS	512
diff --git a/tools/testing/selftests/bpf/test_sock_addr.c b/tools/testing/selftests/bpf/test_sock_addr.c
index a5e76b9219b9..aeeb76a54d63 100644
--- a/tools/testing/selftests/bpf/test_sock_addr.c
+++ b/tools/testing/selftests/bpf/test_sock_addr.c
@@ -20,15 +20,12 @@
 
 #include "cgroup_helpers.h"
 #include "bpf_rlimit.h"
+#include "bpf_util.h"
 
 #ifndef ENOTSUPP
 # define ENOTSUPP 524
 #endif
 
-#ifndef ARRAY_SIZE
-# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#endif
-
 #define CG_PATH	"/foo"
 #define CONNECT4_PROG_PATH	"./connect4_prog.o"
 #define CONNECT6_PROG_PATH	"./connect6_prog.o"
@@ -998,8 +995,9 @@ int init_pktinfo(int domain, struct cmsghdr *cmsg)
 	return 0;
 }
 
-static int sendmsg_to_server(const struct sockaddr_storage *addr,
-			     socklen_t addr_len, int set_cmsg, int *syscall_err)
+static int sendmsg_to_server(int type, const struct sockaddr_storage *addr,
+			     socklen_t addr_len, int set_cmsg, int flags,
+			     int *syscall_err)
 {
 	union {
 		char buf[CMSG_SPACE(sizeof(struct in6_pktinfo))];
@@ -1022,7 +1020,7 @@ static int sendmsg_to_server(const struct sockaddr_storage *addr,
 		goto err;
 	}
 
-	fd = socket(domain, SOCK_DGRAM, 0);
+	fd = socket(domain, type, 0);
 	if (fd == -1) {
 		log_err("Failed to create client socket");
 		goto err;
@@ -1052,7 +1050,7 @@ static int sendmsg_to_server(const struct sockaddr_storage *addr,
 		}
 	}
 
-	if (sendmsg(fd, &hdr, 0) != sizeof(data)) {
+	if (sendmsg(fd, &hdr, flags) != sizeof(data)) {
 		log_err("Fail to send message to server");
 		*syscall_err = errno;
 		goto err;
@@ -1066,6 +1064,15 @@ out:
 	return fd;
 }
 
+static int fastconnect_to_server(const struct sockaddr_storage *addr,
+				 socklen_t addr_len)
+{
+	int sendmsg_err;
+
+	return sendmsg_to_server(SOCK_STREAM, addr, addr_len, /*set_cmsg*/0,
+				 MSG_FASTOPEN, &sendmsg_err);
+}
+
 static int recvmsg_from_client(int sockfd, struct sockaddr_storage *src_addr)
 {
 	struct timeval tv;
@@ -1185,6 +1192,20 @@ static int run_connect_test_case(const struct sock_addr_test *test)
 	if (cmp_local_ip(clientfd, &expected_src_addr))
 		goto err;
 
+	if (test->type == SOCK_STREAM) {
+		/* Test TCP Fast Open scenario */
+		clientfd = fastconnect_to_server(&requested_addr, addr_len);
+		if (clientfd == -1)
+			goto err;
+
+		/* Make sure src and dst addrs were overridden properly */
+		if (cmp_peer_addr(clientfd, &expected_addr))
+			goto err;
+
+		if (cmp_local_ip(clientfd, &expected_src_addr))
+			goto err;
+	}
+
 	goto out;
 err:
 	err = -1;
@@ -1222,8 +1243,9 @@ static int run_sendmsg_test_case(const struct sock_addr_test *test)
 		if (clientfd >= 0)
 			close(clientfd);
 
-		clientfd = sendmsg_to_server(&requested_addr, addr_len,
-					     set_cmsg, &err);
+		clientfd = sendmsg_to_server(test->type, &requested_addr,
+					     addr_len, set_cmsg, /*flags*/0,
+					     &err);
 		if (err)
 			goto out;
 		else if (clientfd == -1)
diff --git a/tools/testing/selftests/bpf/test_socket_cookie.c b/tools/testing/selftests/bpf/test_socket_cookie.c
new file mode 100644
index 000000000000..68e108e4687a
--- /dev/null
+++ b/tools/testing/selftests/bpf/test_socket_cookie.c
@@ -0,0 +1,225 @@
+// SPDX-License-Identifier: GPL-2.0
+// Copyright (c) 2018 Facebook
+
+#include <string.h>
+#include <unistd.h>
+
+#include <arpa/inet.h>
+#include <netinet/in.h>
+#include <sys/types.h>
+#include <sys/socket.h>
+
+#include <bpf/bpf.h>
+#include <bpf/libbpf.h>
+
+#include "bpf_rlimit.h"
+#include "cgroup_helpers.h"
+
+#define CG_PATH			"/foo"
+#define SOCKET_COOKIE_PROG	"./socket_cookie_prog.o"
+
+static int start_server(void)
+{
+	struct sockaddr_in6 addr;
+	int fd;
+
+	fd = socket(AF_INET6, SOCK_STREAM, 0);
+	if (fd == -1) {
+		log_err("Failed to create server socket");
+		goto out;
+	}
+
+	memset(&addr, 0, sizeof(addr));
+	addr.sin6_family = AF_INET6;
+	addr.sin6_addr = in6addr_loopback;
+	addr.sin6_port = 0;
+
+	if (bind(fd, (const struct sockaddr *)&addr, sizeof(addr)) == -1) {
+		log_err("Failed to bind server socket");
+		goto close_out;
+	}
+
+	if (listen(fd, 128) == -1) {
+		log_err("Failed to listen on server socket");
+		goto close_out;
+	}
+
+	goto out;
+
+close_out:
+	close(fd);
+	fd = -1;
+out:
+	return fd;
+}
+
+static int connect_to_server(int server_fd)
+{
+	struct sockaddr_storage addr;
+	socklen_t len = sizeof(addr);
+	int fd;
+
+	fd = socket(AF_INET6, SOCK_STREAM, 0);
+	if (fd == -1) {
+		log_err("Failed to create client socket");
+		goto out;
+	}
+
+	if (getsockname(server_fd, (struct sockaddr *)&addr, &len)) {
+		log_err("Failed to get server addr");
+		goto close_out;
+	}
+
+	if (connect(fd, (const struct sockaddr *)&addr, len) == -1) {
+		log_err("Fail to connect to server");
+		goto close_out;
+	}
+
+	goto out;
+
+close_out:
+	close(fd);
+	fd = -1;
+out:
+	return fd;
+}
+
+static int validate_map(struct bpf_map *map, int client_fd)
+{
+	__u32 cookie_expected_value;
+	struct sockaddr_in6 addr;
+	socklen_t len = sizeof(addr);
+	__u32 cookie_value;
+	__u64 cookie_key;
+	int err = 0;
+	int map_fd;
+
+	if (!map) {
+		log_err("Map not found in BPF object");
+		goto err;
+	}
+
+	map_fd = bpf_map__fd(map);
+
+	err = bpf_map_get_next_key(map_fd, NULL, &cookie_key);
+	if (err) {
+		log_err("Can't get cookie key from map");
+		goto out;
+	}
+
+	err = bpf_map_lookup_elem(map_fd, &cookie_key, &cookie_value);
+	if (err) {
+		log_err("Can't get cookie value from map");
+		goto out;
+	}
+
+	err = getsockname(client_fd, (struct sockaddr *)&addr, &len);
+	if (err) {
+		log_err("Can't get client local addr");
+		goto out;
+	}
+
+	cookie_expected_value = (ntohs(addr.sin6_port) << 8) | 0xFF;
+	if (cookie_value != cookie_expected_value) {
+		log_err("Unexpected value in map: %x != %x", cookie_value,
+			cookie_expected_value);
+		goto err;
+	}
+
+	goto out;
+err:
+	err = -1;
+out:
+	return err;
+}
+
+static int run_test(int cgfd)
+{
+	enum bpf_attach_type attach_type;
+	struct bpf_prog_load_attr attr;
+	struct bpf_program *prog;
+	struct bpf_object *pobj;
+	const char *prog_name;
+	int server_fd = -1;
+	int client_fd = -1;
+	int prog_fd = -1;
+	int err = 0;
+
+	memset(&attr, 0, sizeof(attr));
+	attr.file = SOCKET_COOKIE_PROG;
+	attr.prog_type = BPF_PROG_TYPE_UNSPEC;
+
+	err = bpf_prog_load_xattr(&attr, &pobj, &prog_fd);
+	if (err) {
+		log_err("Failed to load %s", attr.file);
+		goto out;
+	}
+
+	bpf_object__for_each_program(prog, pobj) {
+		prog_name = bpf_program__title(prog, /*needs_copy*/ false);
+
+		if (strcmp(prog_name, "cgroup/connect6") == 0) {
+			attach_type = BPF_CGROUP_INET6_CONNECT;
+		} else if (strcmp(prog_name, "sockops") == 0) {
+			attach_type = BPF_CGROUP_SOCK_OPS;
+		} else {
+			log_err("Unexpected prog: %s", prog_name);
+			goto err;
+		}
+
+		err = bpf_prog_attach(bpf_program__fd(prog), cgfd, attach_type,
+				      BPF_F_ALLOW_OVERRIDE);
+		if (err) {
+			log_err("Failed to attach prog %s", prog_name);
+			goto out;
+		}
+	}
+
+	server_fd = start_server();
+	if (server_fd == -1)
+		goto err;
+
+	client_fd = connect_to_server(server_fd);
+	if (client_fd == -1)
+		goto err;
+
+	if (validate_map(bpf_map__next(NULL, pobj), client_fd))
+		goto err;
+
+	goto out;
+err:
+	err = -1;
+out:
+	close(client_fd);
+	close(server_fd);
+	bpf_object__close(pobj);
+	printf("%s\n", err ? "FAILED" : "PASSED");
+	return err;
+}
+
+int main(int argc, char **argv)
+{
+	int cgfd = -1;
+	int err = 0;
+
+	if (setup_cgroup_environment())
+		goto err;
+
+	cgfd = create_and_get_cgroup(CG_PATH);
+	if (!cgfd)
+		goto err;
+
+	if (join_cgroup(CG_PATH))
+		goto err;
+
+	if (run_test(cgfd))
+		goto err;
+
+	goto out;
+err:
+	err = -1;
+out:
+	close(cgfd);
+	cleanup_cgroup_environment();
+	return err;
+}
diff --git a/tools/testing/selftests/bpf/test_tcpbpf.h b/tools/testing/selftests/bpf/test_tcpbpf.h
index 2fe43289943c..7bcfa6207005 100644
--- a/tools/testing/selftests/bpf/test_tcpbpf.h
+++ b/tools/testing/selftests/bpf/test_tcpbpf.h
@@ -12,5 +12,6 @@ struct tcpbpf_globals {
 	__u32 good_cb_test_rv;
 	__u64 bytes_received;
 	__u64 bytes_acked;
+	__u32 num_listen;
 };
 #endif
diff --git a/tools/testing/selftests/bpf/test_tcpbpf_kern.c b/tools/testing/selftests/bpf/test_tcpbpf_kern.c
index 3e645ee41ed5..4b7fd540cea9 100644
--- a/tools/testing/selftests/bpf/test_tcpbpf_kern.c
+++ b/tools/testing/selftests/bpf/test_tcpbpf_kern.c
@@ -96,15 +96,22 @@ int bpf_testcb(struct bpf_sock_ops *skops)
 			if (!gp)
 				break;
 			g = *gp;
-			g.total_retrans = skops->total_retrans;
-			g.data_segs_in = skops->data_segs_in;
-			g.data_segs_out = skops->data_segs_out;
-			g.bytes_received = skops->bytes_received;
-			g.bytes_acked = skops->bytes_acked;
+			if (skops->args[0] == BPF_TCP_LISTEN) {
+				g.num_listen++;
+			} else {
+				g.total_retrans = skops->total_retrans;
+				g.data_segs_in = skops->data_segs_in;
+				g.data_segs_out = skops->data_segs_out;
+				g.bytes_received = skops->bytes_received;
+				g.bytes_acked = skops->bytes_acked;
+			}
 			bpf_map_update_elem(&global_map, &key, &g,
 					    BPF_ANY);
 		}
 		break;
+	case BPF_SOCK_OPS_TCP_LISTEN_CB:
+		bpf_sock_ops_cb_flags_set(skops, BPF_SOCK_OPS_STATE_CB_FLAG);
+		break;
 	default:
 		rv = -1;
 	}
diff --git a/tools/testing/selftests/bpf/test_tcpbpf_user.c b/tools/testing/selftests/bpf/test_tcpbpf_user.c
index 84ab5163c828..a275c2971376 100644
--- a/tools/testing/selftests/bpf/test_tcpbpf_user.c
+++ b/tools/testing/selftests/bpf/test_tcpbpf_user.c
@@ -1,27 +1,59 @@
 // SPDX-License-Identifier: GPL-2.0
+#include <inttypes.h>
 #include <stdio.h>
 #include <stdlib.h>
-#include <stdio.h>
 #include <unistd.h>
 #include <errno.h>
-#include <signal.h>
 #include <string.h>
-#include <assert.h>
-#include <linux/perf_event.h>
-#include <linux/ptrace.h>
 #include <linux/bpf.h>
-#include <sys/ioctl.h>
-#include <sys/time.h>
 #include <sys/types.h>
-#include <sys/stat.h>
-#include <fcntl.h>
 #include <bpf/bpf.h>
 #include <bpf/libbpf.h>
-#include "bpf_util.h"
+
 #include "bpf_rlimit.h"
-#include <linux/perf_event.h>
+#include "bpf_util.h"
+#include "cgroup_helpers.h"
+
 #include "test_tcpbpf.h"
 
+#define EXPECT_EQ(expected, actual, fmt)			\
+	do {							\
+		if ((expected) != (actual)) {			\
+			printf("  Value of: " #actual "\n"	\
+			       "    Actual: %" fmt "\n"		\
+			       "  Expected: %" fmt "\n",	\
+			       (actual), (expected));		\
+			goto err;				\
+		}						\
+	} while (0)
+
+int verify_result(const struct tcpbpf_globals *result)
+{
+	__u32 expected_events;
+
+	expected_events = ((1 << BPF_SOCK_OPS_TIMEOUT_INIT) |
+			   (1 << BPF_SOCK_OPS_RWND_INIT) |
+			   (1 << BPF_SOCK_OPS_TCP_CONNECT_CB) |
+			   (1 << BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB) |
+			   (1 << BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB) |
+			   (1 << BPF_SOCK_OPS_NEEDS_ECN) |
+			   (1 << BPF_SOCK_OPS_STATE_CB) |
+			   (1 << BPF_SOCK_OPS_TCP_LISTEN_CB));
+
+	EXPECT_EQ(expected_events, result->event_map, "#" PRIx32);
+	EXPECT_EQ(501ULL, result->bytes_received, "llu");
+	EXPECT_EQ(1002ULL, result->bytes_acked, "llu");
+	EXPECT_EQ(1, result->data_segs_in, PRIu32);
+	EXPECT_EQ(1, result->data_segs_out, PRIu32);
+	EXPECT_EQ(0x80, result->bad_cb_test_rv, PRIu32);
+	EXPECT_EQ(0, result->good_cb_test_rv, PRIu32);
+	EXPECT_EQ(1, result->num_listen, PRIu32);
+
+	return 0;
+err:
+	return -1;
+}
+
 static int bpf_find_map(const char *test, struct bpf_object *obj,
 			const char *name)
 {
@@ -35,42 +67,28 @@ static int bpf_find_map(const char *test, struct bpf_object *obj,
 	return bpf_map__fd(map);
 }
 
-#define SYSTEM(CMD)						\
-	do {							\
-		if (system(CMD)) {				\
-			printf("system(%s) FAILS!\n", CMD);	\
-		}						\
-	} while (0)
-
 int main(int argc, char **argv)
 {
 	const char *file = "test_tcpbpf_kern.o";
 	struct tcpbpf_globals g = {0};
-	int cg_fd, prog_fd, map_fd;
-	bool debug_flag = false;
+	const char *cg_path = "/foo";
 	int error = EXIT_FAILURE;
 	struct bpf_object *obj;
-	char cmd[100], *dir;
-	struct stat buffer;
+	int prog_fd, map_fd;
+	int cg_fd = -1;
 	__u32 key = 0;
-	int pid;
 	int rv;
 
-	if (argc > 1 && strcmp(argv[1], "-d") == 0)
-		debug_flag = true;
+	if (setup_cgroup_environment())
+		goto err;
 
-	dir = "/tmp/cgroupv2/foo";
+	cg_fd = create_and_get_cgroup(cg_path);
+	if (!cg_fd)
+		goto err;
 
-	if (stat(dir, &buffer) != 0) {
-		SYSTEM("mkdir -p /tmp/cgroupv2");
-		SYSTEM("mount -t cgroup2 none /tmp/cgroupv2");
-		SYSTEM("mkdir -p /tmp/cgroupv2/foo");
-	}
-	pid = (int) getpid();
-	sprintf(cmd, "echo %d >> /tmp/cgroupv2/foo/cgroup.procs", pid);
-	SYSTEM(cmd);
+	if (join_cgroup(cg_path))
+		goto err;
 
-	cg_fd = open(dir, O_DIRECTORY, O_RDONLY);
 	if (bpf_prog_load(file, BPF_PROG_TYPE_SOCK_OPS, &obj, &prog_fd)) {
 		printf("FAILED: load_bpf_file failed for: %s\n", file);
 		goto err;
@@ -83,7 +101,10 @@ int main(int argc, char **argv)
 		goto err;
 	}
 
-	SYSTEM("./tcp_server.py");
+	if (system("./tcp_server.py")) {
+		printf("FAILED: TCP server\n");
+		goto err;
+	}
 
 	map_fd = bpf_find_map(__func__, obj, "global_map");
 	if (map_fd < 0)
@@ -95,34 +116,16 @@ int main(int argc, char **argv)
 		goto err;
 	}
 
-	if (g.bytes_received != 501 || g.bytes_acked != 1002 ||
-	    g.data_segs_in != 1 || g.data_segs_out != 1 ||
-	    (g.event_map ^ 0x47e) != 0 || g.bad_cb_test_rv != 0x80 ||
-		g.good_cb_test_rv != 0) {
+	if (verify_result(&g)) {
 		printf("FAILED: Wrong stats\n");
-		if (debug_flag) {
-			printf("\n");
-			printf("bytes_received: %d (expecting 501)\n",
-			       (int)g.bytes_received);
-			printf("bytes_acked:    %d (expecting 1002)\n",
-			       (int)g.bytes_acked);
-			printf("data_segs_in:   %d (expecting 1)\n",
-			       g.data_segs_in);
-			printf("data_segs_out:  %d (expecting 1)\n",
-			       g.data_segs_out);
-			printf("event_map:      0x%x (at least 0x47e)\n",
-			       g.event_map);
-			printf("bad_cb_test_rv: 0x%x (expecting 0x80)\n",
-			       g.bad_cb_test_rv);
-			printf("good_cb_test_rv:0x%x (expecting 0)\n",
-			       g.good_cb_test_rv);
-		}
 		goto err;
 	}
+
 	printf("PASSED!\n");
 	error = 0;
 err:
 	bpf_prog_detach(cg_fd, BPF_CGROUP_SOCK_OPS);
+	close(cg_fd);
+	cleanup_cgroup_environment();
 	return error;
-
 }
diff --git a/tools/testing/selftests/bpf/test_verifier.c b/tools/testing/selftests/bpf/test_verifier.c
index 41106d9d5cc7..67c412d19c09 100644
--- a/tools/testing/selftests/bpf/test_verifier.c
+++ b/tools/testing/selftests/bpf/test_verifier.c
@@ -42,15 +42,12 @@
 #endif
 #include "bpf_rlimit.h"
 #include "bpf_rand.h"
+#include "bpf_util.h"
 #include "../../../include/linux/filter.h"
 
-#ifndef ARRAY_SIZE
-# define ARRAY_SIZE(x) (sizeof(x) / sizeof((x)[0]))
-#endif
-
 #define MAX_INSNS	BPF_MAXINSNS
 #define MAX_FIXUPS	8
-#define MAX_NR_MAPS	7
+#define MAX_NR_MAPS	8
 #define POINTER_VALUE	0xcafe4all
 #define TEST_DATA_LEN	64
 
@@ -70,6 +67,7 @@ struct bpf_test {
 	int fixup_prog1[MAX_FIXUPS];
 	int fixup_prog2[MAX_FIXUPS];
 	int fixup_map_in_map[MAX_FIXUPS];
+	int fixup_cgroup_storage[MAX_FIXUPS];
 	const char *errstr;
 	const char *errstr_unpriv;
 	uint32_t retval;
@@ -4631,6 +4629,121 @@ static struct bpf_test tests[] = {
 		.flags = F_NEEDS_EFFICIENT_UNALIGNED_ACCESS,
 	},
 	{
+		"valid cgroup storage access",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_cgroup_storage = { 1 },
+		.result = ACCEPT,
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
+		"invalid cgroup storage access 1",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_map1 = { 1 },
+		.result = REJECT,
+		.errstr = "cannot pass map_type 1 into func bpf_get_local_storage",
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
+		"invalid cgroup storage access 2",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_LD_MAP_FD(BPF_REG_1, 1),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.result = REJECT,
+		.errstr = "fd 1 is not pointing to valid bpf_map",
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
+		"invalid per-cgroup storage access 3",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 256),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_cgroup_storage = { 1 },
+		.result = REJECT,
+		.errstr = "invalid access to map value, value_size=64 off=256 size=4",
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
+		"invalid cgroup storage access 4",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, -2),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 1),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_cgroup_storage = { 1 },
+		.result = REJECT,
+		.errstr = "invalid access to map value, value_size=64 off=-2 size=4",
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
+		"invalid cgroup storage access 5",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 7),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_cgroup_storage = { 1 },
+		.result = REJECT,
+		.errstr = "get_local_storage() doesn't support non-zero flags",
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
+		"invalid cgroup storage access 6",
+		.insns = {
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_1),
+			BPF_LD_MAP_FD(BPF_REG_1, 0),
+			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
+				     BPF_FUNC_get_local_storage),
+			BPF_LDX_MEM(BPF_W, BPF_REG_1, BPF_REG_0, 0),
+			BPF_MOV64_REG(BPF_REG_0, BPF_REG_1),
+			BPF_ALU64_IMM(BPF_AND, BPF_REG_0, 1),
+			BPF_EXIT_INSN(),
+		},
+		.fixup_cgroup_storage = { 1 },
+		.result = REJECT,
+		.errstr = "get_local_storage() doesn't support non-zero flags",
+		.prog_type = BPF_PROG_TYPE_CGROUP_SKB,
+	},
+	{
 		"multiple registers share map_lookup_elem result",
 		.insns = {
 			BPF_MOV64_IMM(BPF_REG_1, 10),
@@ -6997,7 +7110,7 @@ static struct bpf_test tests[] = {
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
 			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 				     BPF_FUNC_map_lookup_elem),
-			BPF_MOV64_REG(BPF_REG_0, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map_in_map = { 3 },
@@ -7020,7 +7133,7 @@ static struct bpf_test tests[] = {
 			BPF_ALU64_IMM(BPF_ADD, BPF_REG_1, 8),
 			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 				     BPF_FUNC_map_lookup_elem),
-			BPF_MOV64_REG(BPF_REG_0, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map_in_map = { 3 },
@@ -7042,7 +7155,7 @@ static struct bpf_test tests[] = {
 			BPF_MOV64_REG(BPF_REG_1, BPF_REG_0),
 			BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0,
 				     BPF_FUNC_map_lookup_elem),
-			BPF_MOV64_REG(BPF_REG_0, 0),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
 			BPF_EXIT_INSN(),
 		},
 		.fixup_map_in_map = { 3 },
@@ -12372,6 +12485,32 @@ static struct bpf_test tests[] = {
 		.result = REJECT,
 		.errstr = "variable ctx access var_off=(0x0; 0x4)",
 	},
+	{
+		"mov64 src == dst",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_2, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_2),
+			// Check bounds are OK
+			BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_2),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+		.result = ACCEPT,
+	},
+	{
+		"mov64 src != dst",
+		.insns = {
+			BPF_MOV64_IMM(BPF_REG_3, 0),
+			BPF_MOV64_REG(BPF_REG_2, BPF_REG_3),
+			// Check bounds are OK
+			BPF_ALU64_REG(BPF_ADD, BPF_REG_1, BPF_REG_2),
+			BPF_MOV64_IMM(BPF_REG_0, 0),
+			BPF_EXIT_INSN(),
+		},
+		.prog_type = BPF_PROG_TYPE_SCHED_CLS,
+		.result = ACCEPT,
+	},
 };
 
 static int probe_filter_length(const struct bpf_insn *fp)
@@ -12476,6 +12615,19 @@ static int create_map_in_map(void)
 	return outer_map_fd;
 }
 
+static int create_cgroup_storage(void)
+{
+	int fd;
+
+	fd = bpf_create_map(BPF_MAP_TYPE_CGROUP_STORAGE,
+			    sizeof(struct bpf_cgroup_storage_key),
+			    TEST_DATA_LEN, 0, 0);
+	if (fd < 0)
+		printf("Failed to create array '%s'!\n", strerror(errno));
+
+	return fd;
+}
+
 static char bpf_vlog[UINT_MAX >> 8];
 
 static void do_test_fixup(struct bpf_test *test, struct bpf_insn *prog,
@@ -12488,6 +12640,7 @@ static void do_test_fixup(struct bpf_test *test, struct bpf_insn *prog,
 	int *fixup_prog1 = test->fixup_prog1;
 	int *fixup_prog2 = test->fixup_prog2;
 	int *fixup_map_in_map = test->fixup_map_in_map;
+	int *fixup_cgroup_storage = test->fixup_cgroup_storage;
 
 	if (test->fill_helper)
 		test->fill_helper(test);
@@ -12555,6 +12708,14 @@ static void do_test_fixup(struct bpf_test *test, struct bpf_insn *prog,
 			fixup_map_in_map++;
 		} while (*fixup_map_in_map);
 	}
+
+	if (*fixup_cgroup_storage) {
+		map_fds[7] = create_cgroup_storage();
+		do {
+			prog[*fixup_cgroup_storage].imm = map_fds[7];
+			fixup_cgroup_storage++;
+		} while (*fixup_cgroup_storage);
+	}
 }
 
 static void do_test_single(struct bpf_test *test, bool unpriv,
diff --git a/tools/testing/selftests/bpf/trace_helpers.c b/tools/testing/selftests/bpf/trace_helpers.c
index 3868dcb63420..cabe2a3a3b30 100644
--- a/tools/testing/selftests/bpf/trace_helpers.c
+++ b/tools/testing/selftests/bpf/trace_helpers.c
@@ -88,7 +88,7 @@ static int page_size;
 static int page_cnt = 8;
 static struct perf_event_mmap_page *header;
 
-int perf_event_mmap(int fd)
+int perf_event_mmap_header(int fd, struct perf_event_mmap_page **header)
 {
 	void *base;
 	int mmap_size;
@@ -102,10 +102,15 @@ int perf_event_mmap(int fd)
 		return -1;
 	}
 
-	header = base;
+	*header = base;
 	return 0;
 }
 
+int perf_event_mmap(int fd)
+{
+	return perf_event_mmap_header(fd, &header);
+}
+
 static int perf_event_poll(int fd)
 {
 	struct pollfd pfd = { .fd = fd, .events = POLLIN };
@@ -163,3 +168,42 @@ int perf_event_poller(int fd, perf_event_print_fn output_fn)
 
 	return ret;
 }
+
+int perf_event_poller_multi(int *fds, struct perf_event_mmap_page **headers,
+			    int num_fds, perf_event_print_fn output_fn)
+{
+	enum bpf_perf_event_ret ret;
+	struct pollfd *pfds;
+	void *buf = NULL;
+	size_t len = 0;
+	int i;
+
+	pfds = calloc(num_fds, sizeof(*pfds));
+	if (!pfds)
+		return LIBBPF_PERF_EVENT_ERROR;
+
+	for (i = 0; i < num_fds; i++) {
+		pfds[i].fd = fds[i];
+		pfds[i].events = POLLIN;
+	}
+
+	for (;;) {
+		poll(pfds, num_fds, 1000);
+		for (i = 0; i < num_fds; i++) {
+			if (!pfds[i].revents)
+				continue;
+
+			ret = bpf_perf_event_read_simple(headers[i],
+							 page_cnt * page_size,
+							 page_size, &buf, &len,
+							 bpf_perf_event_print,
+							 output_fn);
+			if (ret != LIBBPF_PERF_EVENT_CONT)
+				break;
+		}
+	}
+	free(buf);
+	free(pfds);
+
+	return ret;
+}
diff --git a/tools/testing/selftests/bpf/trace_helpers.h b/tools/testing/selftests/bpf/trace_helpers.h
index 3b4bcf7f5084..18924f23db1b 100644
--- a/tools/testing/selftests/bpf/trace_helpers.h
+++ b/tools/testing/selftests/bpf/trace_helpers.h
@@ -3,6 +3,7 @@
 #define __TRACE_HELPER_H
 
 #include <libbpf.h>
+#include <linux/perf_event.h>
 
 struct ksym {
 	long addr;
@@ -16,6 +17,9 @@ long ksym_get_addr(const char *name);
 typedef enum bpf_perf_event_ret (*perf_event_print_fn)(void *data, int size);
 
 int perf_event_mmap(int fd);
+int perf_event_mmap_header(int fd, struct perf_event_mmap_page **header);
 /* return LIBBPF_PERF_EVENT_DONE or LIBBPF_PERF_EVENT_ERROR */
 int perf_event_poller(int fd, perf_event_print_fn output_fn);
+int perf_event_poller_multi(int *fds, struct perf_event_mmap_page **headers,
+			    int num_fds, perf_event_print_fn output_fn);
 #endif
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh
new file mode 100755
index 000000000000..76f1ab4898d9
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre.sh
@@ -0,0 +1,217 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test uses standard topology for testing gretap. See
+# ../../../net/forwarding/mirror_gre_topo_lib.sh for more details.
+#
+# Test offloading various features of offloading gretap mirrors specific to
+# mlxsw.
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=6
+source $lib_dir/lib.sh
+source $lib_dir/mirror_lib.sh
+source $lib_dir/mirror_gre_lib.sh
+source $lib_dir/mirror_gre_topo_lib.sh
+
+setup_keyful()
+{
+	tunnel_create gt6-key ip6gretap 2001:db8:3::1 2001:db8:3::2 \
+		      ttl 100 tos inherit allow-localremote \
+		      key 1234
+
+	tunnel_create h3-gt6-key ip6gretap 2001:db8:3::2 2001:db8:3::1 \
+		      key 1234
+	ip link set h3-gt6-key vrf v$h3
+	matchall_sink_create h3-gt6-key
+
+	ip address add dev $swp3 2001:db8:3::1/64
+	ip address add dev $h3 2001:db8:3::2/64
+}
+
+cleanup_keyful()
+{
+	ip address del dev $h3 2001:db8:3::2/64
+	ip address del dev $swp3 2001:db8:3::1/64
+
+	tunnel_destroy h3-gt6-key
+	tunnel_destroy gt6-key
+}
+
+setup_soft()
+{
+	# Set up a topology for testing underlay routes that point at an
+	# unsupported soft device.
+
+	tunnel_create gt6-soft ip6gretap 2001:db8:4::1 2001:db8:4::2 \
+		      ttl 100 tos inherit allow-localremote
+
+	tunnel_create h3-gt6-soft ip6gretap 2001:db8:4::2 2001:db8:4::1
+	ip link set h3-gt6-soft vrf v$h3
+	matchall_sink_create h3-gt6-soft
+
+	ip link add name v1 type veth peer name v2
+	ip link set dev v1 up
+	ip address add dev v1 2001:db8:4::1/64
+
+	ip link set dev v2 vrf v$h3
+	ip link set dev v2 up
+	ip address add dev v2 2001:db8:4::2/64
+}
+
+cleanup_soft()
+{
+	ip link del dev v1
+
+	tunnel_destroy h3-gt6-soft
+	tunnel_destroy gt6-soft
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip address add dev $swp3 2001:db8:2::1/64
+	ip address add dev $h3 2001:db8:2::2/64
+
+	ip address add dev $swp3 192.0.2.129/28
+	ip address add dev $h3 192.0.2.130/28
+
+	setup_keyful
+	setup_soft
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	cleanup_soft
+	cleanup_keyful
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $swp3 2001:db8:2::1/64
+
+	ip address del dev $h3 192.0.2.130/28
+	ip address del dev $swp3 192.0.2.129/28
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_span_gre_ttl_inherit()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type ttl inherit
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type ttl 100
+
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: no offload on TTL of inherit ($tcflags)"
+}
+
+test_span_gre_tos_fixed()
+{
+	local tundev=$1; shift
+	local type=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	ip link set dev $tundev type $type tos 0x10
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	fail_test_span_gre_dir $tundev ingress
+
+	ip link set dev $tundev type $type tos inherit
+	quick_test_span_gre_dir $tundev ingress
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: no offload on a fixed TOS ($tcflags)"
+}
+
+test_span_failable()
+{
+	local should_fail=$1; shift
+	local tundev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress $tundev "matchall $tcflags"
+	if ((should_fail)); then
+	    fail_test_span_gre_dir  $tundev ingress
+	else
+	    quick_test_span_gre_dir $tundev ingress
+	fi
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what: should_fail=$should_fail ($tcflags)"
+}
+
+test_failable()
+{
+	local should_fail=$1; shift
+
+	test_span_failable $should_fail gt6-key "mirror to keyful gretap"
+	test_span_failable $should_fail gt6-soft "mirror to gretap w/ soft underlay"
+}
+
+test_sw()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	test_failable 0
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+test_hw()
+{
+	test_failable 1
+
+	test_span_gre_tos_fixed gt4 gretap "mirror to gretap"
+	test_span_gre_tos_fixed gt6 ip6gretap "mirror to ip6gretap"
+
+	test_span_gre_ttl_inherit gt4 gretap "mirror to gretap"
+	test_span_gre_ttl_inherit gt6 ip6gretap "mirror to ip6gretap"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+if ! tc_offload_check; then
+    check_err 1 "Could not test offloaded functionality"
+    log_test "mlxsw-specific tests for mirror to gretap"
+    exit
+fi
+
+tcflags="skip_hw"
+test_sw
+
+tcflags="skip_sw"
+test_hw
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
new file mode 100644
index 000000000000..6f3a70df63bc
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/mirror_gre_scale.sh
@@ -0,0 +1,197 @@
+# SPDX-License-Identifier: GPL-2.0
+
+# Test offloading a number of mirrors-to-gretap. The test creates a number of
+# tunnels. Then it adds one flower mirror for each of the tunnels, matching a
+# given host IP. Then it generates traffic at each of the host IPs and checks
+# that the traffic has been mirrored at the appropriate tunnel.
+#
+#   +--------------------------+                   +--------------------------+
+#   | H1                       |                   |                       H2 |
+#   |     + $h1                |                   |                $h2 +     |
+#   |     | 2001:db8:1:X::1/64 |                   | 2001:db8:1:X::2/64 |     |
+#   +-----|--------------------+                   +--------------------|-----+
+#         |                                                             |
+#   +-----|-------------------------------------------------------------|-----+
+#   | SW  o--> mirrors                                                  |     |
+#   | +---|-------------------------------------------------------------|---+ |
+#   | |   + $swp1                    BR                           $swp2 +   | |
+#   | +---------------------------------------------------------------------+ |
+#   |                                                                         |
+#   |     + $swp3                          + gt6-<X> (ip6gretap)              |
+#   |     | 2001:db8:2:X::1/64             : loc=2001:db8:2:X::1              |
+#   |     |                                : rem=2001:db8:2:X::2              |
+#   |     |                                : ttl=100                          |
+#   |     |                                : tos=inherit                      |
+#   |     |                                :                                  |
+#   +-----|--------------------------------:----------------------------------+
+#         |                                :
+#   +-----|--------------------------------:----------------------------------+
+#   | H3  + $h3                            + h3-gt6-<X> (ip6gretap)           |
+#   |       2001:db8:2:X::2/64               loc=2001:db8:2:X::2              |
+#   |                                        rem=2001:db8:2:X::1              |
+#   |                                        ttl=100                          |
+#   |                                        tos=inherit                      |
+#   |                                                                         |
+#   +-------------------------------------------------------------------------+
+
+source ../../../../net/forwarding/mirror_lib.sh
+
+MIRROR_NUM_NETIFS=6
+
+mirror_gre_ipv6_addr()
+{
+	local net=$1; shift
+	local num=$1; shift
+
+	printf "2001:db8:%x:%x" $net $num
+}
+
+mirror_gre_tunnels_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	MIRROR_GRE_BATCH_FILE="$(mktemp)"
+	for ((i=0; i < count; ++i)); do
+		local match_dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		((mirror_gre_tunnels++))
+
+		ip address add dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+		ip address add dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+
+		ip address add dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+		ip address add dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+
+		tunnel_create $tun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::1 \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      ttl 100 tos inherit allow-localremote
+
+		tunnel_create $htun ip6gretap \
+			      $(mirror_gre_ipv6_addr 2 $i)::2 \
+			      $(mirror_gre_ipv6_addr 2 $i)::1
+		ip link set $htun vrf v$h3
+		matchall_sink_create $htun
+
+		cat >> $MIRROR_GRE_BATCH_FILE <<-EOF
+			filter add dev $swp1 ingress pref 1000 \
+				protocol ipv6 \
+				flower $tcflags dst_ip $match_dip \
+				action mirred egress mirror dev $tun
+		EOF
+	done
+
+	tc -b $MIRROR_GRE_BATCH_FILE
+	check_err_fail $should_fail $? "Mirror rule insertion"
+}
+
+mirror_gre_tunnels_destroy()
+{
+	local count=$1; shift
+
+	for ((i=0; i < count; ++i)); do
+		local htun=h3-gt6-$i
+		local tun=gt6-$i
+
+		ip address del dev $h3 $(mirror_gre_ipv6_addr 2 $i)::2/64
+		ip address del dev $swp3 $(mirror_gre_ipv6_addr 2 $i)::1/64
+
+		ip address del dev $h2 $(mirror_gre_ipv6_addr 1 $i)::2/64
+		ip address del dev $h1 $(mirror_gre_ipv6_addr 1 $i)::1/64
+
+		tunnel_destroy $htun
+		tunnel_destroy $tun
+	done
+}
+
+__mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	mirror_gre_tunnels_create $count $should_fail
+	if ((should_fail)); then
+	    return
+	fi
+
+	sleep 5
+
+	for ((i = 0; i < count; ++i)); do
+		local dip=$(mirror_gre_ipv6_addr 1 $i)::2
+		local htun=h3-gt6-$i
+		local message
+
+		icmp6_capture_install $htun
+		mirror_test v$h1 "" $dip $htun 100 10
+		icmp6_capture_uninstall $htun
+	done
+}
+
+mirror_gre_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__mirror_gre_test $count $should_fail
+}
+
+mirror_gre_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	mirror_gre_tunnels=0
+
+	vrf_prepare
+
+	simple_if_init $h1
+	simple_if_init $h2
+	simple_if_init $h3
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	ip link set dev $swp3 up
+}
+
+mirror_gre_cleanup()
+{
+	mirror_gre_tunnels_destroy $mirror_gre_tunnels
+
+	ip link set dev $swp3 down
+
+	ip link set dev $swp2 down
+
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+
+	ip link del dev br1
+
+	simple_if_fini $h3
+	simple_if_fini $h2
+	simple_if_fini $h1
+
+	vrf_cleanup
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh
new file mode 100755
index 000000000000..1ca631d5aaba
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_bridge.sh
@@ -0,0 +1,189 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for DSCP prioritization and rewrite. Packets ingress $swp1 with a DSCP
+# tag and are prioritized according to the map at $swp1. They egress $swp2 and
+# the DSCP value is updated to match the map at that interface. The updated DSCP
+# tag is verified at $h2.
+#
+# ICMP responses are produced with the same DSCP tag that arrived at $h2. They
+# go through prioritization at $swp2 and DSCP retagging at $swp1. The tag is
+# verified at $h1--it should match the original tag.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |   192.0.2.2/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |  +-|----------------------------------------------------------------|-+   |
+# |  | + $swp1                       BR                           $swp2 + |   |
+# |  |   APP=0,5,10 .. 7,5,17                      APP=0,5,20 .. 7,5,27   |   |
+# |  +--------------------------------------------------------------------+   |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_dscp
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+
+h1_create()
+{
+	local dscp;
+
+	simple_if_init $h1 192.0.2.1/28
+	tc qdisc add dev $h1 clsact
+	dscp_capture_install $h1 10
+}
+
+h1_destroy()
+{
+	dscp_capture_uninstall $h1 10
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/28
+	tc qdisc add dev $h2 clsact
+	dscp_capture_install $h2 20
+}
+
+h2_destroy()
+{
+	dscp_capture_uninstall $h2 20
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/28
+}
+
+dscp_map()
+{
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		echo app=$prio,5,$((base + prio))
+	done
+}
+
+switch_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	ip link set dev $swp2 master br1
+	ip link set dev $swp2 up
+
+	lldptool -T -i $swp1 -V APP $(dscp_map 10) >/dev/null
+	lldptool -T -i $swp2 -V APP $(dscp_map 20) >/dev/null
+	lldpad_app_wait_set $swp1
+	lldpad_app_wait_set $swp2
+}
+
+switch_destroy()
+{
+	lldptool -T -i $swp2 -V APP -d $(dscp_map 20) >/dev/null
+	lldptool -T -i $swp1 -V APP -d $(dscp_map 10) >/dev/null
+	lldpad_app_wait_del
+
+	ip link set dev $swp2 nomaster
+	ip link set dev $swp1 nomaster
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.2
+}
+
+dscp_ping_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local prio=$1; shift
+	local dev_10=$1; shift
+	local dev_20=$1; shift
+
+	local dscp_10=$(((prio + 10) << 2))
+	local dscp_20=$(((prio + 20) << 2))
+
+	RET=0
+
+	local -A t0s
+	eval "t0s=($(dscp_fetch_stats $dev_10 10)
+		   $(dscp_fetch_stats $dev_20 20))"
+
+	ip vrf exec $vrf_name \
+	   ${PING} -Q $dscp_10 ${sip:+-I $sip} $dip \
+		   -c 10 -i 0.1 -w 2 &> /dev/null
+
+	local -A t1s
+	eval "t1s=($(dscp_fetch_stats $dev_10 10)
+		   $(dscp_fetch_stats $dev_20 20))"
+
+	for key in ${!t0s[@]}; do
+		local expect
+		if ((key == prio+10 || key == prio+20)); then
+			expect=10
+		else
+			expect=0
+		fi
+
+		local delta=$((t1s[$key] - t0s[$key]))
+		((expect == delta))
+		check_err $? "DSCP $key: Expected to capture $expect packets, got $delta."
+	done
+
+	log_test "DSCP rewrite: $dscp_10-(prio $prio)-$dscp_20"
+}
+
+test_dscp()
+{
+	for prio in {0..7}; do
+		dscp_ping_test v$h1 192.0.2.1 192.0.2.2 $prio $h1 $h2
+	done
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh
new file mode 100755
index 000000000000..281d90766e12
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/qos_dscp_router.sh
@@ -0,0 +1,233 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for DSCP prioritization in the router.
+#
+# With ip_forward_update_priority disabled, the packets are expected to keep
+# their DSCP (which in this test uses only values 0..7) intact as they are
+# forwarded by the switch. That is verified at $h2. ICMP responses are formed
+# with the same DSCP as the requests, and likewise pass through the switch
+# intact, which is verified at $h1.
+#
+# With ip_forward_update_priority enabled, router reprioritizes the packets
+# according to the table in reprioritize(). Thus, say, DSCP 7 maps to priority
+# 4, which on egress maps back to DSCP 4. The response packet then gets
+# reprioritized to 6, getting DSCP 6 on egress.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1             |                             |            $h2 +     |
+# |    | 192.0.2.1/28    |                             |  192.0.2.18/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                                                |
+# +----|----------------------------------------------------------------|-----+
+# | SW |                                                                |     |
+# |    + $swp1                                                    $swp2 +     |
+# |      192.0.2.2/28                                     192.0.2.17/28       |
+# |      APP=0,5,0 .. 7,5,7                          APP=0,5,0 .. 7,5,7       |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	test_update
+	test_no_update
+"
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+
+reprioritize()
+{
+	local in=$1; shift
+
+	# This is based on rt_tos2priority in include/net/route.h. Assuming 1:1
+	# mapping between priorities and TOS, it yields a new priority for a
+	# packet with ingress priority of $in.
+	local -a reprio=(0 0 2 2 6 6 4 4)
+
+	echo ${reprio[$in]}
+}
+
+h1_create()
+{
+	local dscp;
+
+	simple_if_init $h1 192.0.2.1/28
+	tc qdisc add dev $h1 clsact
+	dscp_capture_install $h1 0
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	dscp_capture_uninstall $h1 0
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	tc qdisc add dev $h2 clsact
+	dscp_capture_install $h2 0
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	dscp_capture_uninstall $h2 0
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+dscp_map()
+{
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		echo app=$prio,5,$((base + prio))
+	done
+}
+
+switch_create()
+{
+	simple_if_init $swp1 192.0.2.2/28
+	__simple_if_init $swp2 v$swp1 192.0.2.17/28
+
+	lldptool -T -i $swp1 -V APP $(dscp_map 0) >/dev/null
+	lldptool -T -i $swp2 -V APP $(dscp_map 0) >/dev/null
+	lldpad_app_wait_set $swp1
+	lldpad_app_wait_set $swp2
+}
+
+switch_destroy()
+{
+	lldptool -T -i $swp2 -V APP -d $(dscp_map 0) >/dev/null
+	lldptool -T -i $swp1 -V APP -d $(dscp_map 0) >/dev/null
+	lldpad_app_wait_del
+
+	__simple_if_fini $swp2 192.0.2.17/28
+	simple_if_fini $swp1 192.0.2.2/28
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	sysctl_set net.ipv4.ip_forward_update_priority 1
+	h1_create
+	h2_create
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+	h2_destroy
+	h1_destroy
+	sysctl_restore net.ipv4.ip_forward_update_priority
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+dscp_ping_test()
+{
+	local vrf_name=$1; shift
+	local sip=$1; shift
+	local dip=$1; shift
+	local prio=$1; shift
+	local reprio=$1; shift
+	local dev1=$1; shift
+	local dev2=$1; shift
+
+	local prio2=$($reprio $prio)   # ICMP Request egress prio
+	local prio3=$($reprio $prio2)  # ICMP Response egress prio
+
+	local dscp=$((prio << 2))     # ICMP Request ingress DSCP
+	local dscp2=$((prio2 << 2))   # ICMP Request egress DSCP
+	local dscp3=$((prio3 << 2))   # ICMP Response egress DSCP
+
+	RET=0
+
+	eval "local -A dev1_t0s=($(dscp_fetch_stats $dev1 0))"
+	eval "local -A dev2_t0s=($(dscp_fetch_stats $dev2 0))"
+
+	ip vrf exec $vrf_name \
+	   ${PING} -Q $dscp ${sip:+-I $sip} $dip \
+		   -c 10 -i 0.1 -w 2 &> /dev/null
+
+	eval "local -A dev1_t1s=($(dscp_fetch_stats $dev1 0))"
+	eval "local -A dev2_t1s=($(dscp_fetch_stats $dev2 0))"
+
+	for i in {0..7}; do
+		local dscpi=$((i << 2))
+		local expect2=0
+		local expect3=0
+
+		if ((i == prio2)); then
+			expect2=10
+		fi
+		if ((i == prio3)); then
+			expect3=10
+		fi
+
+		local delta=$((dev2_t1s[$i] - dev2_t0s[$i]))
+		((expect2 == delta))
+		check_err $? "DSCP $dscpi@$dev2: Expected to capture $expect2 packets, got $delta."
+
+		delta=$((dev1_t1s[$i] - dev1_t0s[$i]))
+		((expect3 == delta))
+		check_err $? "DSCP $dscpi@$dev1: Expected to capture $expect3 packets, got $delta."
+	done
+
+	log_test "DSCP rewrite: $dscp-(prio $prio2)-$dscp2-(prio $prio3)-$dscp3"
+}
+
+__test_update()
+{
+	local update=$1; shift
+	local reprio=$1; shift
+
+	sysctl_restore net.ipv4.ip_forward_update_priority
+	sysctl_set net.ipv4.ip_forward_update_priority $update
+
+	for prio in {0..7}; do
+		dscp_ping_test v$h1 192.0.2.1 192.0.2.18 $prio $reprio $h1 $h2
+	done
+}
+
+test_update()
+{
+	__test_update 1 reprioritize
+}
+
+test_no_update()
+{
+	__test_update 0 echo
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
new file mode 100644
index 000000000000..d231649b4f01
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/router_scale.sh
@@ -0,0 +1,167 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ROUTER_NUM_NETIFS=4
+
+router_h1_create()
+{
+	simple_if_init $h1 192.0.1.1/24
+	ip route add 193.0.0.0/8 via 192.0.1.2 dev $h1
+}
+
+router_h1_destroy()
+{
+	ip route del 193.0.0.0/8 via 192.0.1.2 dev $h1
+	simple_if_fini $h1 192.0.1.1/24
+}
+
+router_h2_create()
+{
+	simple_if_init $h2 192.0.2.1/24
+	tc qdisc add dev $h2 handle ffff: ingress
+}
+
+router_h2_destroy()
+{
+	tc qdisc del dev $h2 handle ffff: ingress
+	simple_if_fini $h2 192.0.2.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	ip address add 192.0.1.2/24 dev $rp1
+	ip address add 192.0.2.2/24 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 192.0.2.2/24 dev $rp2
+	ip address del 192.0.1.2/24 dev $rp1
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+router_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	h1mac=$(mac_get $h1)
+	rp1mac=$(mac_get $rp1)
+
+	vrf_prepare
+
+	router_h1_create
+	router_h2_create
+
+	router_create
+}
+
+router_offload_validate()
+{
+	local route_count=$1
+	local offloaded_count
+
+	offloaded_count=$(ip route | grep -o 'offload' | wc -l)
+	[[ $offloaded_count -ge $route_count ]]
+}
+
+router_routes_create()
+{
+	local route_count=$1
+	local count=0
+
+	ROUTE_FILE="$(mktemp)"
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				echo route add 193.${i}.${j}.${k}/32 via \
+				       192.0.2.1 dev $rp2  >> $ROUTE_FILE
+				((count++))
+			done
+		done
+	done
+
+	ip -b $ROUTE_FILE &> /dev/null
+}
+
+router_routes_destroy()
+{
+	if [[ -v ROUTE_FILE ]]; then
+		rm -f $ROUTE_FILE
+	fi
+}
+
+router_test()
+{
+	local route_count=$1
+	local should_fail=$2
+	local count=0
+
+	RET=0
+
+	router_routes_create $route_count
+
+	router_offload_validate $route_count
+	check_err_fail $should_fail $? "Offload of $route_count routes"
+	if [[ $RET -ne 0 ]] || [[ $should_fail -eq 1 ]]; then
+		return
+	fi
+
+	tc filter add dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	for i in {0..255}
+	do
+		for j in {0..255}
+		do
+			for k in {0..255}
+			do
+				if [[ $count -eq $route_count ]]; then
+					break 3
+				fi
+
+				$MZ $h1 -c 1 -p 64 -a $h1mac -b $rp1mac \
+					-A 192.0.1.1 -B 193.${i}.${j}.${k} \
+					-t ip -q
+				((count++))
+			done
+		done
+	done
+
+	tc_check_packets "dev $h2 ingress" 1 $route_count
+	check_err $? "Offload mismatch"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 flower \
+		skip_sw dst_ip 193.0.0.0/8 action drop
+
+	router_routes_destroy
+}
+
+router_cleanup()
+{
+	pre_cleanup
+
+	router_routes_destroy
+	router_destroy
+
+	router_h2_destroy
+	router_h1_destroy
+
+	vrf_cleanup
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
new file mode 100755
index 000000000000..3b75180f455d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh
@@ -0,0 +1,366 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# This test is for checking the A-TCAM and C-TCAM operation in Spectrum-2.
+# It tries to exercise as many code paths in the eRP state machine as
+# possible.
+
+lib_dir=$(dirname $0)/../../../../net/forwarding
+
+ALL_TESTS="single_mask_test identical_filters_test two_masks_test \
+	multiple_masks_test ctcam_edge_cases_test"
+NUM_NETIFS=2
+source $lib_dir/tc_common.sh
+source $lib_dir/lib.sh
+
+tcflags="skip_hw"
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 198.51.100.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 198.51.100.2/24
+	tc qdisc add dev $h2 clsact
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2 192.0.2.2/24 198.51.100.2/24
+}
+
+single_mask_test()
+{
+	# When only a single mask is required, the device uses the master
+	# mask and not the eRP table. Verify that under this mode the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 198.51.100.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 2
+	check_err $? "Two filters - did not match highest priority"
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match lowest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 198.51.100.1 -B 198.51.100.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Single filter - did not match after delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "single mask test ($tcflags)"
+}
+
+identical_filters_test()
+{
+	# When two filters that only differ in their priority are used,
+	# one needs to be inserted into the C-TCAM. This test verifies
+	# that filters are correctly spilled to C-TCAM and that the right
+	# filter is matched
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match C-TCAM filter after A-TCAM delete"
+
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 2
+	check_err $? "Did not match C-TCAM filter after A-TCAM add"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter after C-TCAM delete"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "identical filters test ($tcflags)"
+}
+
+two_masks_test()
+{
+	# When more than one mask is required, the eRP table is used. This
+	# test verifies that the eRP table is correctly allocated and used
+
+	RET=0
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.0.0/16 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Two filters - did not match highest priority"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Single filter - did not match"
+
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Two filters - did not match highest priority after add"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "two masks test ($tcflags)"
+}
+
+multiple_masks_test()
+{
+	# The number of masks in a region is limited. Once the maximum
+	# number of masks has been reached filters that require new
+	# masks are spilled to the C-TCAM. This test verifies that
+	# spillage is performed correctly and that the right filter is
+	# matched
+
+	local index
+
+	RET=0
+
+	NUM_MASKS=32
+	BASE_INDEX=100
+
+	for i in $(eval echo {1..$NUM_MASKS}); do
+		index=$((BASE_INDEX - i))
+
+		tc filter add dev $h2 ingress protocol ip pref $index \
+			handle $index \
+			flower $tcflags dst_ip 192.0.2.2/${i} src_ip 192.0.2.1 \
+			action drop
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 1
+		check_err $? "$i filters - did not match highest priority (add)"
+	done
+
+	for i in $(eval echo {$NUM_MASKS..1}); do
+		index=$((BASE_INDEX - i))
+
+		$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 \
+			-B 192.0.2.2 -t ip -q
+
+		tc_check_packets "dev $h2 ingress" $index 2
+		check_err $? "$i filters - did not match highest priority (del)"
+
+		tc filter del dev $h2 ingress protocol ip pref $index \
+			handle $index flower
+	done
+
+	log_test "multiple masks test ($tcflags)"
+}
+
+ctcam_two_atcam_masks_test()
+{
+	RET=0
+
+	# First case: C-TCAM is disabled when there are two A-TCAM masks.
+	# We push a filter into the C-TCAM by using two identical filters
+	# as in identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 3 handle 103 flower \
+		$tcflags dst_ip 192.0.2.0/24 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match A-TCAM filter"
+
+	# Delete both A-TCAM and C-TCAM filters and make sure the remaining
+	# A-TCAM filter still works
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 103 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 3 handle 103 flower
+
+	log_test "ctcam with two atcam masks test ($tcflags)"
+}
+
+ctcam_one_atcam_mask_test()
+{
+	RET=0
+
+	# Second case: C-TCAM is disabled when there is one A-TCAM mask.
+	# The test is similar to identical_filters_test()
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 101 1
+	check_err $? "Did not match C-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+
+	$MZ $h1 -c 1 -p 64 -a $h1mac -b $h2mac -A 192.0.2.1 -B 192.0.2.2 \
+		-t ip -q
+
+	tc_check_packets "dev $h2 ingress" 102 1
+	check_err $? "Did not match A-TCAM filter"
+
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with one atcam mask test ($tcflags)"
+}
+
+ctcam_no_atcam_masks_test()
+{
+	RET=0
+
+	# Third case: C-TCAM is disabled when there are no A-TCAM masks
+	# This test exercises the code path that transitions the eRP table
+	# to its initial state after deleting the last C-TCAM mask
+
+	# Filter goes into A-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 101 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+	# Filter goes into C-TCAM
+	tc filter add dev $h2 ingress protocol ip pref 2 handle 102 flower \
+		$tcflags dst_ip 192.0.2.2 action drop
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $h2 ingress protocol ip pref 2 handle 102 flower
+
+	log_test "ctcam with no atcam masks test ($tcflags)"
+}
+
+ctcam_edge_cases_test()
+{
+	# When the C-TCAM is disabled after deleting the last C-TCAM
+	# mask, we want to make sure the eRP state machine is put in
+	# the correct state
+
+	ctcam_two_atcam_masks_test
+	ctcam_one_atcam_mask_test
+	ctcam_no_atcam_masks_test
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+	h1mac=$(mac_get $h1)
+	h2mac=$(mac_get $h2)
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+if ! tc_offload_check; then
+	check_err 1 "Could not test offloaded functionality"
+	log_test "mlxsw-specific tests for tc flower"
+	exit
+else
+	tcflags="skip_sw"
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
new file mode 100644
index 000000000000..73035e25085d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_lib_spectrum.sh
@@ -0,0 +1,119 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+source "../../../../net/forwarding/devlink_lib.sh"
+
+if [ "$DEVLINK_VIDDID" != "15b3:cb84" ]; then
+	echo "SKIP: test is tailored for Mellanox Spectrum"
+	exit 1
+fi
+
+# Needed for returning to default
+declare -A KVD_DEFAULTS
+
+KVD_CHILDREN="linear hash_single hash_double"
+KVDL_CHILDREN="singles chunks large_chunks"
+
+devlink_sp_resource_minimize()
+{
+	local size
+	local i
+
+	for i in $KVD_CHILDREN; do
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+	done
+
+	for i in $KVDL_CHILDREN; do
+		size=$(devlink_resource_get kvd linear "$i" | \
+		       jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd linear "$i"
+	done
+}
+
+devlink_sp_size_kvd_to_default()
+{
+	local need_reload=0
+	local i
+
+	for i in $KVD_CHILDREN; do
+		local size=$(echo "${KVD_DEFAULTS[kvd_$i]}" | jq '.["size"]')
+		current_size=$(devlink_resource_size_get kvd "$i")
+
+		if [ "$size" -ne "$current_size" ]; then
+			devlink_resource_size_set "$size" kvd "$i"
+			need_reload=1
+		fi
+	done
+
+	for i in $KVDL_CHILDREN; do
+		local size=$(echo "${KVD_DEFAULTS[kvd_linear_$i]}" | \
+			     jq '.["size"]')
+		current_size=$(devlink_resource_size_get kvd linear "$i")
+
+		if [ "$size" -ne "$current_size" ]; then
+			devlink_resource_size_set "$size" kvd linear "$i"
+			need_reload=1
+		fi
+	done
+
+	if [ "$need_reload" -ne "0" ]; then
+		devlink_reload
+	fi
+}
+
+devlink_sp_read_kvd_defaults()
+{
+	local key
+	local i
+
+	KVD_DEFAULTS[kvd]=$(devlink_resource_get "kvd")
+	for i in $KVD_CHILDREN; do
+		key=kvd_$i
+		KVD_DEFAULTS[$key]=$(devlink_resource_get kvd "$i")
+	done
+
+	for i in $KVDL_CHILDREN; do
+		key=kvd_linear_$i
+		KVD_DEFAULTS[$key]=$(devlink_resource_get kvd linear "$i")
+	done
+}
+
+KVD_PROFILES="default scale ipv4_max"
+
+devlink_sp_resource_kvd_profile_set()
+{
+	local profile=$1
+
+	case "$profile" in
+	scale)
+		devlink_resource_size_set 64000 kvd linear
+		devlink_resource_size_set 15616 kvd linear singles
+		devlink_resource_size_set 32000 kvd linear chunks
+		devlink_resource_size_set 16384 kvd linear large_chunks
+		devlink_resource_size_set 128000 kvd hash_single
+		devlink_resource_size_set 48000 kvd hash_double
+		devlink_reload
+		;;
+	ipv4_max)
+		devlink_resource_size_set 64000 kvd linear
+		devlink_resource_size_set 15616 kvd linear singles
+		devlink_resource_size_set 32000 kvd linear chunks
+		devlink_resource_size_set 16384 kvd linear large_chunks
+		devlink_resource_size_set 144000 kvd hash_single
+		devlink_resource_size_set 32768 kvd hash_double
+		devlink_reload
+		;;
+	default)
+		devlink_resource_size_set 98304 kvd linear
+		devlink_resource_size_set 16384 kvd linear singles
+		devlink_resource_size_set 49152 kvd linear chunks
+		devlink_resource_size_set 32768 kvd linear large_chunks
+		devlink_resource_size_set 87040 kvd hash_single
+		devlink_resource_size_set 60416 kvd hash_double
+		devlink_reload
+		;;
+	*)
+		check_err 1 "Unknown profile $profile"
+	esac
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
new file mode 100755
index 000000000000..b1fe960e398a
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/devlink_resources.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=1
+source devlink_lib_spectrum.sh
+
+setup_prepare()
+{
+	devlink_sp_read_kvd_defaults
+}
+
+cleanup()
+{
+	pre_cleanup
+	devlink_sp_size_kvd_to_default
+}
+
+trap cleanup EXIT
+
+setup_prepare
+
+profiles_test()
+{
+	local i
+
+	log_info "Running profile tests"
+
+	for i in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $i
+		log_test "'$i' profile"
+	done
+
+	# Default is explicitly tested at end to ensure it's actually applied
+	RET=0
+	devlink_sp_resource_kvd_profile_set "default"
+	log_test "'default' profile"
+}
+
+resources_min_test()
+{
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-minimum tests"
+
+	for i in $KVD_CHILDREN; do
+		RET=0
+		size=$(devlink_resource_get kvd "$i" | jq '.["size_min"]')
+		devlink_resource_size_set "$size" kvd "$i"
+
+		# In case of linear, need to minimize sub-resources as well
+		if [[ "$i" == "linear" ]]; then
+			for j in $KVDL_CHILDREN; do
+				devlink_resource_size_set 0 kvd linear "$j"
+			done
+		fi
+
+		devlink_reload
+		devlink_sp_size_kvd_to_default
+		log_test "'$i' minimize [$size]"
+	done
+}
+
+resources_max_test()
+{
+	local min_size
+	local size
+	local i
+	local j
+
+	log_info "Running KVD-maximum tests"
+	for i in $KVD_CHILDREN; do
+		RET=0
+		devlink_sp_resource_minimize
+
+		# Calculate the maximum possible size for the given partition
+		size=$(devlink_resource_size_get kvd)
+		for j in $KVD_CHILDREN; do
+			if [ "$i" != "$j" ]; then
+				min_size=$(devlink_resource_get kvd "$j" | \
+					   jq '.["size_min"]')
+				size=$((size - min_size))
+			fi
+		done
+
+		# Test almost maximum size
+		devlink_resource_size_set "$((size - 128))" kvd "$i"
+		devlink_reload
+		log_test "'$i' almost maximize [$((size - 128))]"
+
+		# Test above maximum size
+		devlink resource set "$DEVLINK_DEV" \
+			path "kvd/$i" size $((size + 128)) &> /dev/null
+		check_fail $? "Set kvd/$i to size $((size + 128)) should fail"
+		log_test "'$i' Overflow rejection [$((size + 128))]"
+
+		# Test maximum size
+		if [ "$i" == "hash_single" ] || [ "$i" == "hash_double" ]; then
+			echo "SKIP: Observed problem with exact max $i"
+			continue
+		fi
+
+		devlink_resource_size_set "$size" kvd "$i"
+		devlink_reload
+		log_test "'$i' maximize [$size]"
+
+		devlink_sp_size_kvd_to_default
+	done
+}
+
+profiles_test
+resources_min_test
+resources_max_test
+
+exit "$RET"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
new file mode 100644
index 000000000000..8d2186c7c62b
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/mirror_gre_scale.sh
@@ -0,0 +1,13 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../mirror_gre_scale.sh
+
+mirror_gre_get_target()
+{
+	local should_fail=$1; shift
+
+	if ((! should_fail)); then
+		echo 3
+	else
+		echo 4
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
new file mode 100755
index 000000000000..a0a80e1a69e8
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -0,0 +1,55 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+NUM_NETIFS=6
+source ../../../../net/forwarding/lib.sh
+source ../../../../net/forwarding/tc_common.sh
+source devlink_lib_spectrum.sh
+
+current_test=""
+
+cleanup()
+{
+	pre_cleanup
+	if [ ! -z $current_test ]; then
+		${current_test}_cleanup
+	fi
+	devlink_sp_size_kvd_to_default
+}
+
+devlink_sp_read_kvd_defaults
+trap cleanup EXIT
+
+ALL_TESTS="router tc_flower mirror_gre"
+for current_test in ${TESTS:-$ALL_TESTS}; do
+	source ${current_test}_scale.sh
+
+	num_netifs_var=${current_test^^}_NUM_NETIFS
+	num_netifs=${!num_netifs_var:-$NUM_NETIFS}
+
+	for profile in $KVD_PROFILES; do
+		RET=0
+		devlink_sp_resource_kvd_profile_set $profile
+		if [[ $RET -gt 0 ]]; then
+			log_test "'$current_test' [$profile] setting"
+			continue
+		fi
+
+		for should_fail in 0 1; do
+			RET=0
+			target=$(${current_test}_get_target "$should_fail")
+			${current_test}_setup_prepare
+			setup_wait $num_netifs
+			${current_test}_test "$target" "$should_fail"
+			${current_test}_cleanup
+			if [[ "$should_fail" -eq 0 ]]; then
+				log_test "'$current_test' [$profile] $target"
+			else
+				log_test "'$current_test' [$profile] overflow $target"
+			fi
+		done
+	done
+done
+current_test=""
+
+exit "$RET"
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
new file mode 100644
index 000000000000..21c4697d5bab
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/router_scale.sh
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../router_scale.sh
+
+router_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get kvd hash_single)
+
+	if [[ $should_fail -eq 0 ]]; then
+		target=$((target * 85 / 100))
+	else
+		target=$((target + 1))
+	fi
+
+	echo $target
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
new file mode 100644
index 000000000000..f9bfd8937765
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/tc_flower_scale.sh
@@ -0,0 +1,19 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../tc_flower_scale.sh
+
+tc_flower_get_target()
+{
+	local should_fail=$1; shift
+
+	# 6144 (6x1024) is the theoretical maximum.
+	# One bank of 512 rules is taken by the 18-byte MC router rule.
+	# One rule is the ACL catch-all.
+	# 6144 - 512 - 1 = 5631
+	local target=5631
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
new file mode 100644
index 000000000000..a6d733d2a4b4
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/tc_flower_scale.sh
@@ -0,0 +1,134 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for resource limit of offloaded flower rules. The test adds a given
+# number of flower matches for different IPv6 addresses, then generates traffic,
+# and ensures each was hit exactly once. This file contains functions to set up
+# a testing topology and run the test, and is meant to be sourced from a test
+# script that calls the testing routine with a given number of rules.
+
+TC_FLOWER_NUM_NETIFS=2
+
+tc_flower_h1_create()
+{
+	simple_if_init $h1
+	tc qdisc add dev $h1 clsact
+}
+
+tc_flower_h1_destroy()
+{
+	tc qdisc del dev $h1 clsact
+	simple_if_fini $h1
+}
+
+tc_flower_h2_create()
+{
+	simple_if_init $h2
+	tc qdisc add dev $h2 clsact
+}
+
+tc_flower_h2_destroy()
+{
+	tc qdisc del dev $h2 clsact
+	simple_if_fini $h2
+}
+
+tc_flower_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	vrf_prepare
+
+	tc_flower_h1_create
+	tc_flower_h2_create
+}
+
+tc_flower_cleanup()
+{
+	pre_cleanup
+
+	tc_flower_h2_destroy
+	tc_flower_h1_destroy
+
+	vrf_cleanup
+
+	if [[ -v TC_FLOWER_BATCH_FILE ]]; then
+		rm -f $TC_FLOWER_BATCH_FILE
+	fi
+}
+
+tc_flower_addr()
+{
+	local num=$1; shift
+
+	printf "2001:db8:1::%x" $num
+}
+
+tc_flower_rules_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	TC_FLOWER_BATCH_FILE="$(mktemp)"
+
+	for ((i = 0; i < count; ++i)); do
+		cat >> $TC_FLOWER_BATCH_FILE <<-EOF
+			filter add dev $h2 ingress \
+				prot ipv6 \
+				pref 1000 \
+				flower $tcflags dst_ip $(tc_flower_addr $i) \
+				action drop
+		EOF
+	done
+
+	tc -b $TC_FLOWER_BATCH_FILE
+	check_err_fail $should_fail $? "Rule insertion"
+}
+
+__tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+	local last=$((count - 1))
+
+	tc_flower_rules_create $count $should_fail
+
+	for ((i = 0; i < count; ++i)); do
+		$MZ $h1 -q -c 1 -t ip -p 20 -b bc -6 \
+			-A 2001:db8:2::1 \
+			-B $(tc_flower_addr $i)
+	done
+
+	MISMATCHES=$(
+		tc -j -s filter show dev $h2 ingress |
+		jq -r '[ .[] | select(.kind == "flower") | .options |
+		         values as $rule | .actions[].stats.packets |
+		         select(. != 1) | "\(.) on \($rule.keys.dst_ip)" ] |
+		       join(", ")'
+	)
+
+	test -z "$MISMATCHES"
+	check_err $? "Expected to capture 1 packet for each IP, but got $MISMATCHES"
+}
+
+tc_flower_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	# We use lower 16 bits of IPv6 address for match. Also there are only 16
+	# bits of rule priority space.
+	if ((count > 65536)); then
+		check_err 1 "Invalid count of $count. At most 65536 rules supported"
+		return
+	fi
+
+	if ! tc_offload_check $TC_FLOWER_NUM_NETIFS; then
+		check_err 1 "Could not test offloaded functionality"
+		return
+	fi
+
+	tcflags="skip_sw"
+	__tc_flower_test $count $should_fail
+}
diff --git a/tools/testing/selftests/net/.gitignore b/tools/testing/selftests/net/.gitignore
index 1a0ac3a29ec5..78b24cf76f40 100644
--- a/tools/testing/selftests/net/.gitignore
+++ b/tools/testing/selftests/net/.gitignore
@@ -13,3 +13,4 @@ udpgso
 udpgso_bench_rx
 udpgso_bench_tx
 tcp_inq
+tls
diff --git a/tools/testing/selftests/net/Makefile b/tools/testing/selftests/net/Makefile
index 663e11e85727..9cca68e440a0 100644
--- a/tools/testing/selftests/net/Makefile
+++ b/tools/testing/selftests/net/Makefile
@@ -13,7 +13,7 @@ TEST_GEN_FILES += psock_fanout psock_tpacket msg_zerocopy
 TEST_GEN_FILES += tcp_mmap tcp_inq psock_snd
 TEST_GEN_FILES += udpgso udpgso_bench_tx udpgso_bench_rx
 TEST_GEN_PROGS = reuseport_bpf reuseport_bpf_cpu reuseport_bpf_numa
-TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict
+TEST_GEN_PROGS += reuseport_dualstack reuseaddr_conflict tls
 
 include ../lib.mk
 
diff --git a/tools/testing/selftests/net/forwarding/README b/tools/testing/selftests/net/forwarding/README
index 4a0964c42860..b8a2af8fcfb7 100644
--- a/tools/testing/selftests/net/forwarding/README
+++ b/tools/testing/selftests/net/forwarding/README
@@ -46,6 +46,8 @@ Guidelines for Writing Tests
 
 o Where possible, reuse an existing topology for different tests instead
   of recreating the same topology.
+o Tests that use anything but the most trivial topologies should include
+  an ASCII art showing the topology.
 o Where possible, IPv6 and IPv4 addresses shall conform to RFC 3849 and
   RFC 5737, respectively.
 o Where possible, tests shall be written so that they can be reused by
diff --git a/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh b/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh
new file mode 100755
index 000000000000..a43b4645c4de
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/bridge_port_isolation.sh
@@ -0,0 +1,151 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4 ping_ipv6 flooding"
+NUM_NETIFS=6
+CHECK_TC="yes"
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h1_destroy()
+{
+	simple_if_fini $h1 192.0.2.1/24 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h2_destroy()
+{
+	simple_if_fini $h2 192.0.2.2/24 2001:db8:1::2/64
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.3/24 2001:db8:1::3/64
+}
+
+h3_destroy()
+{
+	simple_if_fini $h3 192.0.2.3/24 2001:db8:1::3/64
+}
+
+switch_create()
+{
+	ip link add dev br0 type bridge
+
+	ip link set dev $swp1 master br0
+	ip link set dev $swp2 master br0
+	ip link set dev $swp3 master br0
+
+	ip link set dev $swp1 type bridge_slave isolated on
+	check_err $? "Can't set isolation on port $swp1"
+	ip link set dev $swp2 type bridge_slave isolated on
+	check_err $? "Can't set isolation on port $swp2"
+	ip link set dev $swp3 type bridge_slave isolated off
+	check_err $? "Can't disable isolation on port $swp3"
+
+	ip link set dev br0 up
+	ip link set dev $swp1 up
+	ip link set dev $swp2 up
+	ip link set dev $swp3 up
+}
+
+switch_destroy()
+{
+	ip link set dev $swp3 down
+	ip link set dev $swp2 down
+	ip link set dev $swp1 down
+
+	ip link del dev br0
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	switch_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	switch_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	RET=0
+	ping_do $h1 192.0.2.2
+	check_fail $? "Ping worked when it should not have"
+
+	RET=0
+	ping_do $h3 192.0.2.2
+	check_err $? "Ping didn't work when it should have"
+
+	log_test "Isolated port ping"
+}
+
+ping_ipv6()
+{
+	RET=0
+	ping6_do $h1 2001:db8:1::2
+	check_fail $? "Ping6 worked when it should not have"
+
+	RET=0
+	ping6_do $h3 2001:db8:1::2
+	check_err $? "Ping6 didn't work when it should have"
+
+	log_test "Isolated port ping6"
+}
+
+flooding()
+{
+	local mac=de:ad:be:ef:13:37
+	local ip=192.0.2.100
+
+	RET=0
+	flood_test_do false $mac $ip $h1 $h2
+	check_err $? "Packet was flooded when it should not have been"
+
+	RET=0
+	flood_test_do true $mac $ip $h3 $h2
+	check_err $? "Packet was not flooded when it should have been"
+
+	log_test "Isolated port flooding"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/devlink_lib.sh b/tools/testing/selftests/net/forwarding/devlink_lib.sh
new file mode 100644
index 000000000000..5ab1e5f43022
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/devlink_lib.sh
@@ -0,0 +1,108 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+##############################################################################
+# Source library
+
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+source "$relative_path/lib.sh"
+
+##############################################################################
+# Defines
+
+DEVLINK_DEV=$(devlink port show | grep "${NETIFS[p1]}" | \
+	      grep -v "${NETIFS[p1]}[0-9]" | cut -d" " -f1 | \
+	      rev | cut -d"/" -f2- | rev)
+if [ -z "$DEVLINK_DEV" ]; then
+	echo "SKIP: ${NETIFS[p1]} has no devlink device registered for it"
+	exit 1
+fi
+if [[ "$(echo $DEVLINK_DEV | grep -c pci)" -eq 0 ]]; then
+	echo "SKIP: devlink device's bus is not PCI"
+	exit 1
+fi
+
+DEVLINK_VIDDID=$(lspci -s $(echo $DEVLINK_DEV | cut -d"/" -f2) \
+		 -n | cut -d" " -f3)
+
+##############################################################################
+# Sanity checks
+
+devlink -j resource show "$DEVLINK_DEV" &> /dev/null
+if [ $? -ne 0 ]; then
+	echo "SKIP: iproute2 too old, missing devlink resource support"
+	exit 1
+fi
+
+##############################################################################
+# Devlink helpers
+
+devlink_resource_names_to_path()
+{
+	local resource
+	local path=""
+
+	for resource in "${@}"; do
+		if [ "$path" == "" ]; then
+			path="$resource"
+		else
+			path="${path}/$resource"
+		fi
+	done
+
+	echo "$path"
+}
+
+devlink_resource_get()
+{
+	local name=$1
+	local resource_name=.[][\"$DEVLINK_DEV\"]
+
+	resource_name="$resource_name | .[] | select (.name == \"$name\")"
+
+	shift
+	for resource in "${@}"; do
+		resource_name="${resource_name} | .[\"resources\"][] | \
+			       select (.name == \"$resource\")"
+	done
+
+	devlink -j resource show "$DEVLINK_DEV" | jq "$resource_name"
+}
+
+devlink_resource_size_get()
+{
+	local size=$(devlink_resource_get "$@" | jq '.["size_new"]')
+
+	if [ "$size" == "null" ]; then
+		devlink_resource_get "$@" | jq '.["size"]'
+	else
+		echo "$size"
+	fi
+}
+
+devlink_resource_size_set()
+{
+	local new_size=$1
+	local path
+
+	shift
+	path=$(devlink_resource_names_to_path "$@")
+	devlink resource set "$DEVLINK_DEV" path "$path" size "$new_size"
+	check_err $? "Failed setting path $path to size $size"
+}
+
+devlink_reload()
+{
+	local still_pending
+
+	devlink dev reload "$DEVLINK_DEV" &> /dev/null
+	check_err $? "Failed reload"
+
+	still_pending=$(devlink resource show "$DEVLINK_DEV" | \
+			grep -c "size_new")
+	check_err $still_pending "Failed reload - There are still unset sizes"
+}
diff --git a/tools/testing/selftests/net/forwarding/gre_multipath.sh b/tools/testing/selftests/net/forwarding/gre_multipath.sh
new file mode 100755
index 000000000000..cca2baa03fb8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/gre_multipath.sh
@@ -0,0 +1,253 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test traffic distribution when a wECMP route forwards traffic to two GRE
+# tunnels.
+#
+# +-------------------------+
+# | H1                      |
+# |               $h1 +     |
+# |      192.0.2.1/28 |     |
+# +-------------------|-----+
+#                     |
+# +-------------------|------------------------+
+# | SW1               |                        |
+# |              $ol1 +                        |
+# |      192.0.2.2/28                          |
+# |                                            |
+# |  + g1a (gre)          + g1b (gre)          |
+# |    loc=192.0.2.65       loc=192.0.2.81     |
+# |    rem=192.0.2.66 --.   rem=192.0.2.82 --. |
+# |    tos=inherit      |   tos=inherit      | |
+# |  .------------------'                    | |
+# |  |                    .------------------' |
+# |  v                    v                    |
+# |  + $ul1.111 (vlan)    + $ul1.222 (vlan)    |
+# |  | 192.0.2.129/28     | 192.0.2.145/28     |
+# |   \                  /                     |
+# |    \________________/                      |
+# |            |                               |
+# |            + $ul1                          |
+# +------------|-------------------------------+
+#              |
+# +------------|-------------------------------+
+# | SW2        + $ul2                          |
+# |     _______|________                       |
+# |    /                \                      |
+# |   /                  \                     |
+# |  + $ul2.111 (vlan)    + $ul2.222 (vlan)    |
+# |  ^ 192.0.2.130/28     ^ 192.0.2.146/28     |
+# |  |                    |                    |
+# |  |                    '------------------. |
+# |  '------------------.                    | |
+# |  + g2a (gre)        | + g2b (gre)        | |
+# |    loc=192.0.2.66   |   loc=192.0.2.82   | |
+# |    rem=192.0.2.65 --'   rem=192.0.2.81 --' |
+# |    tos=inherit          tos=inherit        |
+# |                                            |
+# |              $ol2 +                        |
+# |     192.0.2.17/28 |                        |
+# +-------------------|------------------------+
+#                     |
+# +-------------------|-----+
+# | H2                |     |
+# |               $h2 +     |
+# |     192.0.2.18/28       |
+# +-------------------------+
+
+ALL_TESTS="
+	ping_ipv4
+	multipath_ipv4
+"
+
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip route add vrf v$h1 192.0.2.16/28 via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip route del vrf v$h1 192.0.2.16/28 via 192.0.2.2
+	simple_if_fini $h1 192.0.2.1/28
+}
+
+sw1_create()
+{
+	simple_if_init $ol1 192.0.2.2/28
+	__simple_if_init $ul1 v$ol1
+	vlan_create $ul1 111 v$ol1 192.0.2.129/28
+	vlan_create $ul1 222 v$ol1 192.0.2.145/28
+
+	tunnel_create g1a gre 192.0.2.65 192.0.2.66 tos inherit dev v$ol1
+	__simple_if_init g1a v$ol1 192.0.2.65/32
+	ip route add vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+
+	tunnel_create g1b gre 192.0.2.81 192.0.2.82 tos inherit dev v$ol1
+	__simple_if_init g1b v$ol1 192.0.2.81/32
+	ip route add vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+
+	ip route add vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a \
+	   nexthop dev g1b
+
+	tc qdisc add dev $ul1 clsact
+	tc filter add dev $ul1 egress pref 111 prot ipv4 \
+	   flower dst_ip 192.0.2.66 action pass
+	tc filter add dev $ul1 egress pref 222 prot ipv4 \
+	   flower dst_ip 192.0.2.82 action pass
+}
+
+sw1_destroy()
+{
+	tc qdisc del dev $ul1 clsact
+
+	ip route del vrf v$ol1 192.0.2.16/28
+
+	ip route del vrf v$ol1 192.0.2.82/32 via 192.0.2.146
+	__simple_if_fini g1b 192.0.2.81/32
+	tunnel_destroy g1b
+
+	ip route del vrf v$ol1 192.0.2.66/32 via 192.0.2.130
+	__simple_if_fini g1a 192.0.2.65/32
+	tunnel_destroy g1a
+
+	vlan_destroy $ul1 222
+	vlan_destroy $ul1 111
+	__simple_if_fini $ul1
+	simple_if_fini $ol1 192.0.2.2/28
+}
+
+sw2_create()
+{
+	simple_if_init $ol2 192.0.2.17/28
+	__simple_if_init $ul2 v$ol2
+	vlan_create $ul2 111 v$ol2 192.0.2.130/28
+	vlan_create $ul2 222 v$ol2 192.0.2.146/28
+
+	tunnel_create g2a gre 192.0.2.66 192.0.2.65 tos inherit dev v$ol2
+	__simple_if_init g2a v$ol2 192.0.2.66/32
+	ip route add vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+
+	tunnel_create g2b gre 192.0.2.82 192.0.2.81 tos inherit dev v$ol2
+	__simple_if_init g2b v$ol2 192.0.2.82/32
+	ip route add vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+
+	ip route add vrf v$ol2 192.0.2.0/28 \
+	   nexthop dev g2a \
+	   nexthop dev g2b
+}
+
+sw2_destroy()
+{
+	ip route del vrf v$ol2 192.0.2.0/28
+
+	ip route del vrf v$ol2 192.0.2.81/32 via 192.0.2.145
+	__simple_if_fini g2b 192.0.2.82/32
+	tunnel_destroy g2b
+
+	ip route del vrf v$ol2 192.0.2.65/32 via 192.0.2.129
+	__simple_if_fini g2a 192.0.2.66/32
+	tunnel_destroy g2a
+
+	vlan_destroy $ul2 222
+	vlan_destroy $ul2 111
+	__simple_if_fini $ul2
+	simple_if_fini $ol2 192.0.2.17/28
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.18/28
+	ip route add vrf v$h2 192.0.2.0/28 via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip route del vrf v$h2 192.0.2.0/28 via 192.0.2.17
+	simple_if_fini $h2 192.0.2.18/28
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	ol1=${NETIFS[p2]}
+
+	ul1=${NETIFS[p3]}
+	ul2=${NETIFS[p4]}
+
+	ol2=${NETIFS[p5]}
+	h2=${NETIFS[p6]}
+
+	vrf_prepare
+	h1_create
+	sw1_create
+	sw2_create
+	h2_create
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	h2_destroy
+	sw2_destroy
+	sw1_destroy
+	h1_destroy
+	vrf_cleanup
+}
+
+multipath4_test()
+{
+	local what=$1; shift
+	local weight1=$1; shift
+	local weight2=$1; shift
+
+	sysctl_set net.ipv4.fib_multipath_hash_policy 1
+	ip route replace vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a weight $weight1 \
+	   nexthop dev g1b weight $weight2
+
+	local t0_111=$(tc_rule_stats_get $ul1 111 egress)
+	local t0_222=$(tc_rule_stats_get $ul1 222 egress)
+
+	ip vrf exec v$h1 \
+	   $MZ $h1 -q -p 64 -A 192.0.2.1 -B 192.0.2.18 \
+	       -d 1msec -t udp "sp=1024,dp=0-32768"
+
+	local t1_111=$(tc_rule_stats_get $ul1 111 egress)
+	local t1_222=$(tc_rule_stats_get $ul1 222 egress)
+
+	local d111=$((t1_111 - t0_111))
+	local d222=$((t1_222 - t0_222))
+	multipath_eval "$what" $weight1 $weight2 $d111 $d222
+
+	ip route replace vrf v$ol1 192.0.2.16/28 \
+	   nexthop dev g1a \
+	   nexthop dev g1b
+	sysctl_restore net.ipv4.fib_multipath_hash_policy
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.18
+}
+
+multipath_ipv4()
+{
+	log_info "Running IPv4 multipath tests"
+	multipath4_test "ECMP" 1 1
+	multipath4_test "Weighted MP 2:1" 2 1
+	multipath4_test "Weighted MP 11:45" 11 45
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/lib.sh b/tools/testing/selftests/net/forwarding/lib.sh
index 7b18a53aa556..ca53b539aa2d 100644
--- a/tools/testing/selftests/net/forwarding/lib.sh
+++ b/tools/testing/selftests/net/forwarding/lib.sh
@@ -8,14 +8,21 @@
 PING=${PING:=ping}
 PING6=${PING6:=ping6}
 MZ=${MZ:=mausezahn}
+ARPING=${ARPING:=arping}
+TEAMD=${TEAMD:=teamd}
 WAIT_TIME=${WAIT_TIME:=5}
 PAUSE_ON_FAIL=${PAUSE_ON_FAIL:=no}
 PAUSE_ON_CLEANUP=${PAUSE_ON_CLEANUP:=no}
 NETIF_TYPE=${NETIF_TYPE:=veth}
 NETIF_CREATE=${NETIF_CREATE:=yes}
 
-if [[ -f forwarding.config ]]; then
-	source forwarding.config
+relative_path="${BASH_SOURCE%/*}"
+if [[ "$relative_path" == "${BASH_SOURCE}" ]]; then
+	relative_path="."
+fi
+
+if [[ -f $relative_path/forwarding.config ]]; then
+	source "$relative_path/forwarding.config"
 fi
 
 ##############################################################################
@@ -28,7 +35,10 @@ check_tc_version()
 		echo "SKIP: iproute2 too old; tc is missing JSON support"
 		exit 1
 	fi
+}
 
+check_tc_shblock_support()
+{
 	tc filter help 2>&1 | grep block &> /dev/null
 	if [[ $? -ne 0 ]]; then
 		echo "SKIP: iproute2 too old; tc is missing shared block support"
@@ -36,6 +46,15 @@ check_tc_version()
 	fi
 }
 
+check_tc_chain_support()
+{
+	tc help 2>&1|grep chain &> /dev/null
+	if [[ $? -ne 0 ]]; then
+		echo "SKIP: iproute2 too old; tc is missing chain support"
+		exit 1
+	fi
+}
+
 if [[ "$(id -u)" -ne 0 ]]; then
 	echo "SKIP: need root privileges"
 	exit 0
@@ -45,15 +64,18 @@ if [[ "$CHECK_TC" = "yes" ]]; then
 	check_tc_version
 fi
 
-if [[ ! -x "$(command -v jq)" ]]; then
-	echo "SKIP: jq not installed"
-	exit 1
-fi
+require_command()
+{
+	local cmd=$1; shift
 
-if [[ ! -x "$(command -v $MZ)" ]]; then
-	echo "SKIP: $MZ not installed"
-	exit 1
-fi
+	if [[ ! -x "$(command -v "$cmd")" ]]; then
+		echo "SKIP: $cmd not installed"
+		exit 1
+	fi
+}
+
+require_command jq
+require_command $MZ
 
 if [[ ! -v NUM_NETIFS ]]; then
 	echo "SKIP: importer does not define \"NUM_NETIFS\""
@@ -151,6 +173,19 @@ check_fail()
 	fi
 }
 
+check_err_fail()
+{
+	local should_fail=$1; shift
+	local err=$1; shift
+	local what=$1; shift
+
+	if ((should_fail)); then
+		check_fail $err "$what succeeded, but should have failed"
+	else
+		check_err $err "$what failed"
+	fi
+}
+
 log_test()
 {
 	local test_name=$1
@@ -185,24 +220,54 @@ log_info()
 	echo "INFO: $msg"
 }
 
+setup_wait_dev()
+{
+	local dev=$1; shift
+
+	while true; do
+		ip link show dev $dev up \
+			| grep 'state UP' &> /dev/null
+		if [[ $? -ne 0 ]]; then
+			sleep 1
+		else
+			break
+		fi
+	done
+}
+
 setup_wait()
 {
-	for i in $(eval echo {1..$NUM_NETIFS}); do
-		while true; do
-			ip link show dev ${NETIFS[p$i]} up \
-				| grep 'state UP' &> /dev/null
-			if [[ $? -ne 0 ]]; then
-				sleep 1
-			else
-				break
-			fi
-		done
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
+		setup_wait_dev ${NETIFS[p$i]}
 	done
 
 	# Make sure links are ready.
 	sleep $WAIT_TIME
 }
 
+lldpad_app_wait_set()
+{
+	local dev=$1; shift
+
+	while lldptool -t -i $dev -V APP -c app | grep -q pending; do
+		echo "$dev: waiting for lldpad to push pending APP updates"
+		sleep 5
+	done
+}
+
+lldpad_app_wait_del()
+{
+	# Give lldpad a chance to push down the changes. If the device is downed
+	# too soon, the updates will be left pending. However, they will have
+	# been struck off the lldpad's DB already, so we won't be able to tell
+	# they are pending. Then on next test iteration this would cause
+	# weirdness as newly-added APP rules conflict with the old ones,
+	# sometimes getting stuck in an "unknown" state.
+	sleep 5
+}
+
 pre_cleanup()
 {
 	if [ "${PAUSE_ON_CLEANUP}" = "yes" ]; then
@@ -287,6 +352,29 @@ __addr_add_del()
 	done
 }
 
+__simple_if_init()
+{
+	local if_name=$1; shift
+	local vrf_name=$1; shift
+	local addrs=("${@}")
+
+	ip link set dev $if_name master $vrf_name
+	ip link set dev $if_name up
+
+	__addr_add_del $if_name add "${addrs[@]}"
+}
+
+__simple_if_fini()
+{
+	local if_name=$1; shift
+	local addrs=("${@}")
+
+	__addr_add_del $if_name del "${addrs[@]}"
+
+	ip link set dev $if_name down
+	ip link set dev $if_name nomaster
+}
+
 simple_if_init()
 {
 	local if_name=$1
@@ -298,11 +386,8 @@ simple_if_init()
 	array=("${@}")
 
 	vrf_create $vrf_name
-	ip link set dev $if_name master $vrf_name
 	ip link set dev $vrf_name up
-	ip link set dev $if_name up
-
-	__addr_add_del $if_name add "${array[@]}"
+	__simple_if_init $if_name $vrf_name "${array[@]}"
 }
 
 simple_if_fini()
@@ -315,9 +400,7 @@ simple_if_fini()
 	vrf_name=v$if_name
 	array=("${@}")
 
-	__addr_add_del $if_name del "${array[@]}"
-
-	ip link set dev $if_name down
+	__simple_if_fini $if_name "${array[@]}"
 	vrf_destroy $vrf_name
 }
 
@@ -365,6 +448,28 @@ vlan_destroy()
 	ip link del dev $name
 }
 
+team_create()
+{
+	local if_name=$1; shift
+	local mode=$1; shift
+
+	require_command $TEAMD
+	$TEAMD -t $if_name -d -c '{"runner": {"name": "'$mode'"}}'
+	for slave in "$@"; do
+		ip link set dev $slave down
+		ip link set dev $slave master $if_name
+		ip link set dev $slave up
+	done
+	ip link set dev $if_name up
+}
+
+team_destroy()
+{
+	local if_name=$1; shift
+
+	$TEAMD -t $if_name -k
+}
+
 master_name_get()
 {
 	local if_name=$1
@@ -383,9 +488,10 @@ tc_rule_stats_get()
 {
 	local dev=$1; shift
 	local pref=$1; shift
+	local dir=$1; shift
 
-	tc -j -s filter show dev $dev ingress pref $pref |
-	jq '.[1].options.actions[].stats.packets'
+	tc -j -s filter show dev $dev ${dir:-ingress} pref $pref \
+	    | jq '.[1].options.actions[].stats.packets'
 }
 
 mac_get()
@@ -437,7 +543,9 @@ forwarding_restore()
 
 tc_offload_check()
 {
-	for i in $(eval echo {1..$NUM_NETIFS}); do
+	local num_netifs=${1:-$NUM_NETIFS}
+
+	for ((i = 1; i <= num_netifs; ++i)); do
 		ethtool -k ${NETIFS[p$i]} \
 			| grep "hw-tc-offload: on" &> /dev/null
 		if [[ $? -ne 0 ]]; then
@@ -453,9 +561,15 @@ trap_install()
 	local dev=$1; shift
 	local direction=$1; shift
 
-	# For slow-path testing, we need to install a trap to get to
-	# slow path the packets that would otherwise be switched in HW.
-	tc filter add dev $dev $direction pref 1 flower skip_sw action trap
+	# Some devices may not support or need in-hardware trapping of traffic
+	# (e.g. the veth pairs that this library creates for non-existent
+	# loopbacks). Use continue instead, so that there is a filter in there
+	# (some tests check counters), and so that other filters are still
+	# processed.
+	tc filter add dev $dev $direction pref 1 \
+		flower skip_sw action trap 2>/dev/null \
+	    || tc filter add dev $dev $direction pref 1 \
+		       flower action continue
 }
 
 trap_uninstall()
@@ -463,11 +577,13 @@ trap_uninstall()
 	local dev=$1; shift
 	local direction=$1; shift
 
-	tc filter del dev $dev $direction pref 1 flower skip_sw
+	tc filter del dev $dev $direction pref 1 flower
 }
 
 slow_path_trap_install()
 {
+	# For slow-path testing, we need to install a trap to get to
+	# slow path the packets that would otherwise be switched in HW.
 	if [ "${tcflags/skip_hw}" != "$tcflags" ]; then
 		trap_install "$@"
 	fi
@@ -537,6 +653,48 @@ vlan_capture_uninstall()
 	__vlan_capture_add_del del 100 "$@"
 }
 
+__dscp_capture_add_del()
+{
+	local add_del=$1; shift
+	local dev=$1; shift
+	local base=$1; shift
+	local dscp;
+
+	for prio in {0..7}; do
+		dscp=$((base + prio))
+		__icmp_capture_add_del $add_del $((dscp + 100)) "" $dev \
+				       "skip_hw ip_tos $((dscp << 2))"
+	done
+}
+
+dscp_capture_install()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	__dscp_capture_add_del add $dev $base
+}
+
+dscp_capture_uninstall()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	__dscp_capture_add_del del $dev $base
+}
+
+dscp_fetch_stats()
+{
+	local dev=$1; shift
+	local base=$1; shift
+
+	for prio in {0..7}; do
+		local dscp=$((base + prio))
+		local t=$(tc_rule_stats_get $dev $((dscp + 100)))
+		echo "[$dscp]=$t "
+	done
+}
+
 matchall_sink_create()
 {
 	local dev=$1; shift
@@ -557,33 +715,86 @@ tests_run()
 	done
 }
 
+multipath_eval()
+{
+	local desc="$1"
+	local weight_rp12=$2
+	local weight_rp13=$3
+	local packets_rp12=$4
+	local packets_rp13=$5
+	local weights_ratio packets_ratio diff
+
+	RET=0
+
+	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+		weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
+				| bc -l)
+	else
+		weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" \
+				| bc -l)
+	fi
+
+	if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
+	       check_err 1 "Packet difference is 0"
+	       log_test "Multipath"
+	       log_info "Expected ratio $weights_ratio"
+	       return
+	fi
+
+	if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
+		packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
+				| bc -l)
+	else
+		packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" \
+				| bc -l)
+	fi
+
+	diff=$(echo $weights_ratio - $packets_ratio | bc -l)
+	diff=${diff#-}
+
+	test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
+	check_err $? "Too large discrepancy between expected and measured ratios"
+	log_test "$desc"
+	log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
+}
+
 ##############################################################################
 # Tests
 
-ping_test()
+ping_do()
 {
 	local if_name=$1
 	local dip=$2
 	local vrf_name
 
-	RET=0
-
 	vrf_name=$(master_name_get $if_name)
 	ip vrf exec $vrf_name $PING $dip -c 10 -i 0.1 -w 2 &> /dev/null
+}
+
+ping_test()
+{
+	RET=0
+
+	ping_do $1 $2
 	check_err $?
 	log_test "ping"
 }
 
-ping6_test()
+ping6_do()
 {
 	local if_name=$1
 	local dip=$2
 	local vrf_name
 
-	RET=0
-
 	vrf_name=$(master_name_get $if_name)
 	ip vrf exec $vrf_name $PING6 $dip -c 10 -i 0.1 -w 2 &> /dev/null
+}
+
+ping6_test()
+{
+	RET=0
+
+	ping6_do $1 $2
 	check_err $?
 	log_test "ping6"
 }
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh
new file mode 100755
index 000000000000..c5095da7f6bf
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device without vlan filtering (802.1d).
+#
+# This test uses standard topology for testing mirror-to-gretap. See
+# mirror_gre_topo_lib.sh for more details. The full topology is as follows:
+#
+#  +---------------------+                             +---------------------+
+#  | H1                  |                             |                  H2 |
+#  |     + $h1           |                             |           $h2 +     |
+#  |     | 192.0.2.1/28  |                             |  192.0.2.2/28 |     |
+#  +-----|---------------+                             +---------------|-----+
+#        |                                                             |
+#  +-----|-------------------------------------------------------------|-----+
+#  | SW  o---> mirror                                                  |     |
+#  | +---|-------------------------------------------------------------|---+ |
+#  | |   + $swp1            + br1 (802.1q bridge)                $swp2 +   | |
+#  | +---------------------------------------------------------------------+ |
+#  |                                                                         |
+#  | +---------------------------------------------------------------------+ |
+#  | |                      + br2 (802.1d bridge)                          | |
+#  | |                        192.0.2.129/28                               | |
+#  | |   + $swp3              2001:db8:2::1/64                             | |
+#  | +---|-----------------------------------------------------------------+ |
+#  |     |                                          ^                    ^   |
+#  |     |                     + gt6 (ip6gretap)    | + gt4 (gretap)     |   |
+#  |     |                     : loc=2001:db8:2::1  | : loc=192.0.2.129  |   |
+#  |     |                     : rem=2001:db8:2::2 -+ : rem=192.0.2.130 -+   |
+#  |     |                     : ttl=100              : ttl=100              |
+#  |     |                     : tos=inherit          : tos=inherit          |
+#  +-----|---------------------:----------------------:----------------------+
+#        |                     :                      :
+#  +-----|---------------------:----------------------:----------------------+
+#  | H3  + $h3                 + h3-gt6(ip6gretap)    + h3-gt4 (gretap)      |
+#  |       192.0.2.130/28        loc=2001:db8:2::2      loc=192.0.2.130      |
+#  |       2001:db8:2::2/64      rem=2001:db8:2::1      rem=192.0.2.129      |
+#  |                             ttl=100                ttl=100              |
+#  |                             tos=inherit            tos=inherit          |
+#  +-------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link add name br2 type bridge vlan_filtering 0
+	ip link set dev br2 up
+
+	ip link set dev $swp3 master br2
+	ip route add 192.0.2.130/32 dev br2
+	ip -6 route add 2001:db8:2::2/128 dev br2
+
+	ip address add dev br2 192.0.2.129/28
+	ip address add dev br2 2001:db8:2::1/64
+
+	ip address add dev $h3 192.0.2.130/28
+	ip address add dev $h3 2001:db8:2::2/64
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip address del dev $h3 2001:db8:2::2/64
+	ip address del dev $h3 192.0.2.130/28
+	ip link del dev br2
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
index 3bb4c2ba7b14..197e769c2ed1 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1d_vlan.sh
@@ -74,12 +74,14 @@ test_vlan_match()
 
 test_gretap()
 {
-	test_vlan_match gt4 'vlan_id 555 vlan_ethtype ip' "mirror to gretap"
+	test_vlan_match gt4 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to gretap"
 }
 
 test_ip6gretap()
 {
-	test_vlan_match gt6 'vlan_id 555 vlan_ethtype ipv6' "mirror to ip6gretap"
+	test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to ip6gretap"
 }
 
 test_gretap_stp()
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
new file mode 100755
index 000000000000..a3402cd8d5b6
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q.sh
@@ -0,0 +1,126 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q).
+#
+# This test uses standard topology for testing mirror-to-gretap. See
+# mirror_gre_topo_lib.sh for more details. The full topology is as follows:
+#
+#  +---------------------+                               +---------------------+
+#  | H1                  |                               |                  H2 |
+#  |     + $h1           |                               |           $h2 +     |
+#  |     | 192.0.2.1/28  |                               |  192.0.2.2/28 |     |
+#  +-----|---------------+                               +---------------|-----+
+#        |                                                               |
+#  +-----|---------------------------------------------------------------|-----+
+#  | SW  o---> mirror                                                    |     |
+#  | +---|---------------------------------------------------------------|---+ |
+#  | |   + $swp1                  + br1 (802.1q bridge)            $swp2 +   | |
+#  | |                              192.0.2.129/28                           | |
+#  | |   + $swp3                    2001:db8:2::1/64                         | |
+#  | |   | vid555                   vid555[pvid,untagged]                    | |
+#  | +---|-------------------------------------------------------------------+ |
+#  |     |                                          ^                      ^   |
+#  |     |                     + gt6 (ip6gretap)    |   + gt4 (gretap)     |   |
+#  |     |                     : loc=2001:db8:2::1  |   : loc=192.0.2.129  |   |
+#  |     |                     : rem=2001:db8:2::2 -+   : rem=192.0.2.130 -+   |
+#  |     |                     : ttl=100                : ttl=100              |
+#  |     |                     : tos=inherit            : tos=inherit          |
+#  +-----|---------------------:------------------------:----------------------+
+#        |                     :                        :
+#  +-----|---------------------:------------------------:----------------------+
+#  | H3  + $h3                 + h3-gt6(ip6gretap)      + h3-gt4 (gretap)      |
+#  |     |                       loc=2001:db8:2::2        loc=192.0.2.130      |
+#  |     + $h3.555               rem=2001:db8:2::1        rem=192.0.2.129      |
+#  |       192.0.2.130/28        ttl=100                  ttl=100              |
+#  |       2001:db8:2::2/64      tos=inherit              tos=inherit          |
+#  +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_gretap
+	test_ip6gretap
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+source mirror_gre_topo_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	swp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+	mirror_gre_topo_create
+
+	ip link set dev $swp3 master br1
+	bridge vlan add dev br1 vid 555 pvid untagged self
+	ip address add dev br1 192.0.2.129/28
+	ip address add dev br1 2001:db8:2::1/64
+
+	ip -4 route add 192.0.2.130/32 dev br1
+	ip -6 route add 2001:db8:2::2/128 dev br1
+
+	vlan_create $h3 555 v$h3 192.0.2.130/28 2001:db8:2::2/64
+	bridge vlan add dev $swp3 vid 555
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set dev $swp3 nomaster
+	vlan_destroy $h3 555
+
+	mirror_gre_topo_destroy
+	vrf_cleanup
+}
+
+test_gretap()
+{
+	full_test_span_gre_dir gt4 ingress 8 0 "mirror to gretap"
+	full_test_span_gre_dir gt4 egress 0 8 "mirror to gretap"
+}
+
+test_ip6gretap()
+{
+	full_test_span_gre_dir gt6 ingress 8 0 "mirror to ip6gretap"
+	full_test_span_gre_dir gt6 egress 0 8 "mirror to ip6gretap"
+}
+
+tests()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+tests
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	tests
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
new file mode 100755
index 000000000000..61844caf671e
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_bridge_1q_lag.sh
@@ -0,0 +1,283 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# bridge device with vlan filtering (802.1q), and the egress device is a team
+# device.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |     + $h1.333        |                             |        $h1.555 +     |
+# |     | 192.0.2.1/28   |                             |  192.0.2.18/28 |     |
+# +-----|----------------+                             +----------------|-----+
+#       |                               $h1                             |
+#       +--------------------------------+------------------------------+
+#                                        |
+# +--------------------------------------|------------------------------------+
+# | SW                                   o---> mirror                         |
+# |                                      |                                    |
+# |     +--------------------------------+------------------------------+     |
+# |     |                              $swp1                            |     |
+# |     + $swp1.333                                           $swp1.555 +     |
+# |       192.0.2.2/28                                    192.0.2.17/28       |
+# |                                                                           |
+# | +-----------------------------------------------------------------------+ |
+# | |                        BR1 (802.1q)                                   | |
+# | |     + lag (team)       192.0.2.129/28                                 | |
+# | |    / \                 2001:db8:2::1/64                               | |
+# | +---/---\---------------------------------------------------------------+ |
+# |    /     \                                                            ^   |
+# |   |       \                                        + gt4 (gretap)     |   |
+# |   |        \                                         loc=192.0.2.129  |   |
+# |   |         \                                        rem=192.0.2.130 -+   |
+# |   |          \                                       ttl=100              |
+# |   |           \                                      tos=inherit          |
+# |   |            \                                                          |
+# |   |             \_________________________________                        |
+# |   |                                               \                       |
+# |   + $swp3                                          + $swp4                |
+# +---|------------------------------------------------|----------------------+
+#     |                                                |
+# +---|----------------------+                     +---|----------------------+
+# |   + $h3               H3 |                     |   + $h4               H4 |
+# |     192.0.2.130/28       |                     |     192.0.2.130/28       |
+# |     2001:db8:2::2/64     |                     |     2001:db8:2::2/64     |
+# +--------------------------+                     +--------------------------+
+
+ALL_TESTS="
+	test_mirror_gretap_first
+	test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+	local ips=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+
+	vlan_destroy $if_name $vid
+	ip link set dev $vrf_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+	ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del 192.0.2.16/28 vrf vrf-h1
+	vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+	vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+	ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip -4 route del 192.0.2.0/28 vrf vrf-h2
+	vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create()
+{
+	simple_if_init $h3 192.0.2.130/28
+	tc qdisc add dev $h3 clsact
+}
+
+h3_destroy()
+{
+	tc qdisc del dev $h3 clsact
+	simple_if_fini $h3 192.0.2.130/28
+}
+
+h4_create()
+{
+	simple_if_init $h4 192.0.2.130/28
+	tc qdisc add dev $h4 clsact
+}
+
+h4_destroy()
+{
+	tc qdisc del dev $h4 clsact
+	simple_if_fini $h4 192.0.2.130/28
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	vlan_create $swp1 333 "" 192.0.2.2/28
+	vlan_create $swp1 555 "" 192.0.2.17/28
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	ip link set dev $swp3 up
+	ip link set dev $swp4 up
+
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+	__addr_add_del br1 add 192.0.2.129/32
+	ip -4 route add 192.0.2.130/32 dev br1
+
+	team_create lag loadbalance $swp3 $swp4
+	ip link set dev lag master br1
+}
+
+switch_destroy()
+{
+	ip link set dev lag nomaster
+	team_destroy lag
+
+	ip -4 route del 192.0.2.130/32 dev br1
+	__addr_add_del br1 del 192.0.2.129/32
+	ip link set dev br1 down
+	ip link del dev br1
+
+	ip link set dev $swp4 down
+	ip link set dev $swp3 down
+
+	tunnel_destroy gt4
+
+	vlan_destroy $swp1 555
+	vlan_destroy $swp1 333
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp3=${NETIFS[p3]}
+	h3=${NETIFS[p4]}
+
+	swp4=${NETIFS[p5]}
+	h4=${NETIFS[p6]}
+
+	vrf_prepare
+
+	ip link set dev $h1 up
+	h1_create
+	h2_create
+	h3_create
+	h4_create
+	switch_create
+
+	trap_install $h3 ingress
+	trap_install $h4 ingress
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	trap_uninstall $h4 ingress
+	trap_uninstall $h3 ingress
+
+	switch_destroy
+	h4_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+	ip link set dev $h1 down
+
+	vrf_cleanup
+}
+
+test_lag_slave()
+{
+	local host_dev=$1; shift
+	local up_dev=$1; shift
+	local down_dev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress gt4 \
+		       "proto 802.1q flower vlan_id 333 $tcflags"
+
+	# Test connectivity through $up_dev when $down_dev is set down.
+	ip link set dev $down_dev down
+	setup_wait_dev $up_dev
+	setup_wait_dev $host_dev
+	$ARPING -I br1 192.0.2.130 -qfc 1
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $host_dev 1 10
+
+	# Test lack of connectivity when both slaves are down.
+	ip link set dev $up_dev down
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+
+	ip link set dev $up_dev up
+	ip link set dev $down_dev up
+	mirror_uninstall $swp1 ingress
+
+	log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+	test_lag_slave $h3 $swp3 $swp4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+	test_lag_slave $h4 $swp4 $swp3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
index aa29d46186a8..135902aa8b11 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_changes.sh
@@ -122,15 +122,8 @@ test_span_gre_egress_up()
 	# After setting the device up, wait for neighbor to get resolved so that
 	# we can expect mirroring to work.
 	ip link set dev $swp3 up
-	while true; do
-		ip neigh sh dev $swp3 $remote_ip nud reachable |
-		    grep -q ^
-		if [[ $? -ne 0 ]]; then
-			sleep 1
-		else
-			break
-		fi
-	done
+	setup_wait_dev $swp3
+	ping -c 1 -I $swp3 $remote_ip &>/dev/null
 
 	quick_test_span_gre_dir $tundev ingress
 	mirror_uninstall $swp1 ingress
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
new file mode 100755
index 000000000000..9edf4cb104a8
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lag_lacp.sh
@@ -0,0 +1,285 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for "tc action mirred egress mirror" when the underlay route points at a
+# team device.
+#
+# +----------------------+                             +----------------------+
+# | H1                   |                             |                   H2 |
+# |    + $h1.333         |                             |        $h1.555 +     |
+# |    | 192.0.2.1/28    |                             |  192.0.2.18/28 |     |
+# +----|-----------------+                             +----------------|-----+
+#      |                                $h1                             |
+#      +---------------------------------+------------------------------+
+#                                        |
+# +--------------------------------------|------------------------------------+
+# | SW                                   o---> mirror                         |
+# |                                      |                                    |
+# |   +----------------------------------+------------------------------+     |
+# |   |                                $swp1                            |     |
+# |   + $swp1.333                                             $swp1.555 +     |
+# |     192.0.2.2/28                                      192.0.2.17/28       |
+# |                                                                           |
+# |                                                                           |
+# |   + gt4 (gretap)      ,-> + lag1 (team)                                   |
+# |     loc=192.0.2.129   |   | 192.0.2.129/28                                |
+# |     rem=192.0.2.130 --'   |                                               |
+# |     ttl=100               |                                               |
+# |     tos=inherit           |                                               |
+# |      _____________________|______________________                         |
+# |     /                                            \                        |
+# |    /                                              \                       |
+# |   + $swp3                                          + $swp4                |
+# +---|------------------------------------------------|----------------------+
+#     |                                                |
+# +---|------------------------------------------------|----------------------+
+# |   + $h3                                            + $h4               H3 |
+# |    \                                              /                       |
+# |     \____________________________________________/                        |
+# |                           |                                               |
+# |                           + lag2 (team)                                   |
+# |                             192.0.2.130/28                                |
+# |                                                                           |
+# +---------------------------------------------------------------------------+
+
+ALL_TESTS="
+	test_mirror_gretap_first
+	test_mirror_gretap_second
+"
+
+NUM_NETIFS=6
+source lib.sh
+source mirror_lib.sh
+source mirror_gre_lib.sh
+
+require_command $ARPING
+
+vlan_host_create()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+	local ips=("${@}")
+
+	vrf_create $vrf_name
+	ip link set dev $vrf_name up
+	vlan_create $if_name $vid $vrf_name "${ips[@]}"
+}
+
+vlan_host_destroy()
+{
+	local if_name=$1; shift
+	local vid=$1; shift
+	local vrf_name=$1; shift
+
+	vlan_destroy $if_name $vid
+	ip link set dev $vrf_name down
+	vrf_destroy $vrf_name
+}
+
+h1_create()
+{
+	vlan_host_create $h1 333 vrf-h1 192.0.2.1/28
+	ip -4 route add 192.0.2.16/28 vrf vrf-h1 nexthop via 192.0.2.2
+}
+
+h1_destroy()
+{
+	ip -4 route del 192.0.2.16/28 vrf vrf-h1
+	vlan_host_destroy $h1 333 vrf-h1
+}
+
+h2_create()
+{
+	vlan_host_create $h1 555 vrf-h2 192.0.2.18/28
+	ip -4 route add 192.0.2.0/28 vrf vrf-h2 nexthop via 192.0.2.17
+}
+
+h2_destroy()
+{
+	ip -4 route del 192.0.2.0/28 vrf vrf-h2
+	vlan_host_destroy $h1 555 vrf-h2
+}
+
+h3_create_team()
+{
+	team_create lag2 lacp $h3 $h4
+	__simple_if_init lag2 vrf-h3 192.0.2.130/32
+	ip -4 route add vrf vrf-h3 192.0.2.129/32 dev lag2
+}
+
+h3_destroy_team()
+{
+	ip -4 route del vrf vrf-h3 192.0.2.129/32 dev lag2
+	__simple_if_fini lag2 192.0.2.130/32
+	team_destroy lag2
+
+	ip link set dev $h3 down
+	ip link set dev $h4 down
+}
+
+h3_create()
+{
+	vrf_create vrf-h3
+	ip link set dev vrf-h3 up
+	tc qdisc add dev $h3 clsact
+	tc qdisc add dev $h4 clsact
+	h3_create_team
+}
+
+h3_destroy()
+{
+	h3_destroy_team
+	tc qdisc del dev $h4 clsact
+	tc qdisc del dev $h3 clsact
+	ip link set dev vrf-h3 down
+	vrf_destroy vrf-h3
+}
+
+switch_create()
+{
+	ip link set dev $swp1 up
+	tc qdisc add dev $swp1 clsact
+	vlan_create $swp1 333 "" 192.0.2.2/28
+	vlan_create $swp1 555 "" 192.0.2.17/28
+
+	tunnel_create gt4 gretap 192.0.2.129 192.0.2.130 \
+		      ttl 100 tos inherit
+
+	ip link set dev $swp3 up
+	ip link set dev $swp4 up
+	team_create lag1 lacp $swp3 $swp4
+	__addr_add_del lag1 add 192.0.2.129/32
+	ip -4 route add 192.0.2.130/32 dev lag1
+}
+
+switch_destroy()
+{
+	ip -4 route del 192.0.2.130/32 dev lag1
+	__addr_add_del lag1 del 192.0.2.129/32
+	team_destroy lag1
+
+	ip link set dev $swp4 down
+	ip link set dev $swp3 down
+
+	tunnel_destroy gt4
+
+	vlan_destroy $swp1 555
+	vlan_destroy $swp1 333
+	tc qdisc del dev $swp1 clsact
+	ip link set dev $swp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp3=${NETIFS[p3]}
+	h3=${NETIFS[p4]}
+
+	swp4=${NETIFS[p5]}
+	h4=${NETIFS[p6]}
+
+	vrf_prepare
+
+	ip link set dev $h1 up
+	h1_create
+	h2_create
+	h3_create
+	switch_create
+
+	trap_install $h3 ingress
+	trap_install $h4 ingress
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	trap_uninstall $h4 ingress
+	trap_uninstall $h3 ingress
+
+	switch_destroy
+	h3_destroy
+	h2_destroy
+	h1_destroy
+	ip link set dev $h1 down
+
+	vrf_cleanup
+}
+
+test_lag_slave()
+{
+	local up_dev=$1; shift
+	local down_dev=$1; shift
+	local what=$1; shift
+
+	RET=0
+
+	mirror_install $swp1 ingress gt4 \
+		       "proto 802.1q flower vlan_id 333 $tcflags"
+
+	# Move $down_dev away from the team. That will prompt change in
+	# txability of the connected device, without changing its upness. The
+	# driver should notice the txability change and move the traffic to the
+	# other slave.
+	ip link set dev $down_dev nomaster
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $up_dev 1 10
+
+	# Test lack of connectivity when neither slave is txable.
+	ip link set dev $up_dev nomaster
+	sleep 2
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h3 1 0
+	mirror_test vrf-h1 192.0.2.1 192.0.2.18 $h4 1 0
+	mirror_uninstall $swp1 ingress
+
+	# Recreate H3's team device, because mlxsw, which this test is
+	# predominantly mean to test, requires a bottom-up construction and
+	# doesn't allow enslavement to a device that already has an upper.
+	h3_destroy_team
+	h3_create_team
+	# Wait for ${h,swp}{3,4}.
+	setup_wait
+
+	log_test "$what ($tcflags)"
+}
+
+test_mirror_gretap_first()
+{
+	test_lag_slave $h3 $h4 "mirror to gretap: LAG first slave"
+}
+
+test_mirror_gretap_second()
+{
+	test_lag_slave $h4 $h3 "mirror to gretap: LAG second slave"
+}
+
+test_all()
+{
+	slow_path_trap_install $swp1 ingress
+	slow_path_trap_install $swp1 egress
+
+	tests_run
+
+	slow_path_trap_uninstall $swp1 egress
+	slow_path_trap_uninstall $swp1 ingress
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tcflags="skip_hw"
+test_all
+
+if ! tc_offload_check; then
+	echo "WARN: Could not test offloaded functionality"
+else
+	tcflags="skip_sw"
+	test_all
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
index 619b469365be..fac486178ef7 100644
--- a/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_lib.sh
@@ -1,6 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0
 
-source mirror_lib.sh
+source "$relative_path/mirror_lib.sh"
 
 quick_test_span_gre_dir_ips()
 {
@@ -62,7 +62,7 @@ full_test_span_gre_dir_vlan_ips()
 			  "$backward_type" "$ip1" "$ip2"
 
 	tc filter add dev $h3 ingress pref 77 prot 802.1q \
-		flower $vlan_match ip_proto 0x2f \
+		flower $vlan_match \
 		action pass
 	mirror_test v$h1 $ip1 $ip2 $h3 77 10
 	tc filter del dev $h3 ingress pref 77
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh b/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
index 8fa681eb90e7..6f9ef1820e93 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_nh.sh
@@ -35,6 +35,8 @@ setup_prepare()
 	vrf_prepare
 	mirror_gre_topo_create
 
+	sysctl_set net.ipv4.conf.v$h3.rp_filter 0
+
 	ip address add dev $swp3 192.0.2.161/28
 	ip address add dev $h3 192.0.2.162/28
 	ip address add dev gt4 192.0.2.129/32
@@ -61,6 +63,8 @@ cleanup()
 	ip address del dev $h3 192.0.2.162/28
 	ip address del dev $swp3 192.0.2.161/28
 
+	sysctl_restore net.ipv4.conf.v$h3.rp_filter 0
+
 	mirror_gre_topo_destroy
 	vrf_cleanup
 
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
index 253419564708..39c03e2867f4 100644
--- a/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_topo_lib.sh
@@ -33,7 +33,7 @@
 #   |                                                                         |
 #   +-------------------------------------------------------------------------+
 
-source mirror_topo_lib.sh
+source "$relative_path/mirror_topo_lib.sh"
 
 mirror_gre_topo_h3_create()
 {
diff --git a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
index 5dbc7a08f4bd..204b25f13934 100755
--- a/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_gre_vlan_bridge_1q.sh
@@ -28,6 +28,8 @@ source mirror_lib.sh
 source mirror_gre_lib.sh
 source mirror_gre_topo_lib.sh
 
+require_command $ARPING
+
 setup_prepare()
 {
 	h1=${NETIFS[p1]}
@@ -39,6 +41,12 @@ setup_prepare()
 	swp3=${NETIFS[p5]}
 	h3=${NETIFS[p6]}
 
+	# gt4's remote address is at $h3.555, not $h3. Thus the packets arriving
+	# directly to $h3 for test_gretap_untagged_egress() are rejected by
+	# rp_filter and the test spuriously fails.
+	sysctl_set net.ipv4.conf.all.rp_filter 0
+	sysctl_set net.ipv4.conf.$h3.rp_filter 0
+
 	vrf_prepare
 	mirror_gre_topo_create
 
@@ -65,6 +73,9 @@ cleanup()
 
 	mirror_gre_topo_destroy
 	vrf_cleanup
+
+	sysctl_restore net.ipv4.conf.$h3.rp_filter
+	sysctl_restore net.ipv4.conf.all.rp_filter
 }
 
 test_vlan_match()
@@ -79,12 +90,14 @@ test_vlan_match()
 
 test_gretap()
 {
-	test_vlan_match gt4 'vlan_id 555 vlan_ethtype ip' "mirror to gretap"
+	test_vlan_match gt4 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to gretap"
 }
 
 test_ip6gretap()
 {
-	test_vlan_match gt6 'vlan_id 555 vlan_ethtype ipv6' "mirror to ip6gretap"
+	test_vlan_match gt6 'skip_hw vlan_id 555 vlan_ethtype ip' \
+			"mirror to ip6gretap"
 }
 
 test_span_gre_forbidden_cpu()
@@ -138,7 +151,7 @@ test_span_gre_forbidden_egress()
 
 	bridge vlan add dev $swp3 vid 555
 	# Re-prime FDB
-	arping -I br1.555 192.0.2.130 -fqc 1
+	$ARPING -I br1.555 192.0.2.130 -fqc 1
 	sleep 1
 	quick_test_span_gre_dir $tundev ingress
 
@@ -212,7 +225,7 @@ test_span_gre_fdb_roaming()
 
 	bridge fdb del dev $swp2 $h3mac vlan 555 master
 	# Re-prime FDB
-	arping -I br1.555 192.0.2.130 -fqc 1
+	$ARPING -I br1.555 192.0.2.130 -fqc 1
 	sleep 1
 	quick_test_span_gre_dir $tundev ingress
 
diff --git a/tools/testing/selftests/net/forwarding/mirror_lib.sh b/tools/testing/selftests/net/forwarding/mirror_lib.sh
index d36dc26c6c51..07991e1025c7 100644
--- a/tools/testing/selftests/net/forwarding/mirror_lib.sh
+++ b/tools/testing/selftests/net/forwarding/mirror_lib.sh
@@ -105,7 +105,7 @@ do_test_span_vlan_dir_ips()
 	# Install the capture as skip_hw to avoid double-counting of packets.
 	# The traffic is meant for local box anyway, so will be trapped to
 	# kernel.
-	vlan_capture_install $dev "skip_hw vlan_id $vid"
+	vlan_capture_install $dev "skip_hw vlan_id $vid vlan_ethtype ip"
 	mirror_test v$h1 $ip1 $ip2 $dev 100 $expect
 	mirror_test v$h2 $ip2 $ip1 $dev 100 $expect
 	vlan_capture_uninstall $dev
diff --git a/tools/testing/selftests/net/forwarding/router_bridge.sh b/tools/testing/selftests/net/forwarding/router_bridge.sh
new file mode 100755
index 000000000000..ebc596a272f7
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge.sh
@@ -0,0 +1,113 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	simple_if_fini $h1 192.0.2.1/28 2001:db8:1::1/64
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28 2001:db8:2::2/64
+}
+
+router_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
new file mode 100755
index 000000000000..fef88eb4b873
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_bridge_vlan.sh
@@ -0,0 +1,132 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="
+	ping_ipv4
+	ping_ipv6
+	vlan
+"
+NUM_NETIFS=4
+source lib.sh
+
+h1_create()
+{
+	simple_if_init $h1
+	vlan_create $h1 555 v$h1 192.0.2.1/28 2001:db8:1::1/64
+	ip -4 route add 192.0.2.128/28 vrf v$h1 nexthop via 192.0.2.2
+	ip -6 route add 2001:db8:2::/64 vrf v$h1 nexthop via 2001:db8:1::2
+}
+
+h1_destroy()
+{
+	ip -6 route del 2001:db8:2::/64 vrf v$h1
+	ip -4 route del 192.0.2.128/28 vrf v$h1
+	vlan_destroy $h1 555
+	simple_if_fini $h1
+}
+
+h2_create()
+{
+	simple_if_init $h2 192.0.2.130/28 2001:db8:2::2/64
+	ip -4 route add 192.0.2.0/28 vrf v$h2 nexthop via 192.0.2.129
+	ip -6 route add 2001:db8:1::/64 vrf v$h2 nexthop via 2001:db8:2::1
+}
+
+h2_destroy()
+{
+	ip -6 route del 2001:db8:1::/64 vrf v$h2
+	ip -4 route del 192.0.2.0/28 vrf v$h2
+	simple_if_fini $h2 192.0.2.130/28
+}
+
+router_create()
+{
+	ip link add name br1 type bridge vlan_filtering 1
+	ip link set dev br1 up
+
+	ip link set dev $swp1 master br1
+	ip link set dev $swp1 up
+
+	bridge vlan add dev br1 vid 555 self pvid untagged
+	bridge vlan add dev $swp1 vid 555
+
+	__addr_add_del br1 add 192.0.2.2/28 2001:db8:1::2/64
+
+	ip link set dev $swp2 up
+	__addr_add_del $swp2 add 192.0.2.129/28 2001:db8:2::1/64
+}
+
+router_destroy()
+{
+	__addr_add_del $swp2 del 192.0.2.129/28 2001:db8:2::1/64
+	ip link set dev $swp2 down
+
+	__addr_add_del br1 del 192.0.2.2/28 2001:db8:1::2/64
+	ip link set dev $swp1 down
+	ip link set dev $swp1 nomaster
+
+	ip link del dev br1
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	swp1=${NETIFS[p2]}
+
+	swp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+vlan()
+{
+	RET=0
+
+	bridge vlan add dev br1 vid 333 self
+	check_err $? "Can't add a non-PVID VLAN"
+	bridge vlan del dev br1 vid 333 self
+	check_err $? "Can't remove a non-PVID VLAN"
+
+	log_test "vlan"
+}
+
+ping_ipv4()
+{
+	ping_test $h1 192.0.2.130
+}
+
+ping_ipv6()
+{
+	ping6_test $h1 2001:db8:2::2
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_broadcast.sh b/tools/testing/selftests/net/forwarding/router_broadcast.sh
new file mode 100755
index 000000000000..7bd2ebb6e9de
--- /dev/null
+++ b/tools/testing/selftests/net/forwarding/router_broadcast.sh
@@ -0,0 +1,233 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+ALL_TESTS="ping_ipv4"
+NUM_NETIFS=6
+source lib.sh
+
+h1_create()
+{
+	vrf_create "vrf-h1"
+	ip link set dev $h1 master vrf-h1
+
+	ip link set dev vrf-h1 up
+	ip link set dev $h1 up
+
+	ip address add 192.0.2.2/24 dev $h1
+
+	ip route add 198.51.100.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+	ip route add 198.51.200.0/24 vrf vrf-h1 nexthop via 192.0.2.1
+}
+
+h1_destroy()
+{
+	ip route del 198.51.200.0/24 vrf vrf-h1
+	ip route del 198.51.100.0/24 vrf vrf-h1
+
+	ip address del 192.0.2.2/24 dev $h1
+
+	ip link set dev $h1 down
+	vrf_destroy "vrf-h1"
+}
+
+h2_create()
+{
+	vrf_create "vrf-h2"
+	ip link set dev $h2 master vrf-h2
+
+	ip link set dev vrf-h2 up
+	ip link set dev $h2 up
+
+	ip address add 198.51.100.2/24 dev $h2
+
+	ip route add 192.0.2.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+	ip route add 198.51.200.0/24 vrf vrf-h2 nexthop via 198.51.100.1
+}
+
+h2_destroy()
+{
+	ip route del 198.51.200.0/24 vrf vrf-h2
+	ip route del 192.0.2.0/24 vrf vrf-h2
+
+	ip address del 198.51.100.2/24 dev $h2
+
+	ip link set dev $h2 down
+	vrf_destroy "vrf-h2"
+}
+
+h3_create()
+{
+	vrf_create "vrf-h3"
+	ip link set dev $h3 master vrf-h3
+
+	ip link set dev vrf-h3 up
+	ip link set dev $h3 up
+
+	ip address add 198.51.200.2/24 dev $h3
+
+	ip route add 192.0.2.0/24 vrf vrf-h3 nexthop via 198.51.200.1
+	ip route add 198.51.100.0/24 vrf vrf-h3 nexthop via 198.51.200.1
+}
+
+h3_destroy()
+{
+	ip route del 198.51.100.0/24 vrf vrf-h3
+	ip route del 192.0.2.0/24 vrf vrf-h3
+
+	ip address del 198.51.200.2/24 dev $h3
+
+	ip link set dev $h3 down
+	vrf_destroy "vrf-h3"
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+	ip link set dev $rp3 up
+
+	ip address add 192.0.2.1/24 dev $rp1
+
+	ip address add 198.51.100.1/24 dev $rp2
+	ip address add 198.51.200.1/24 dev $rp3
+}
+
+router_destroy()
+{
+	ip address del 198.51.200.1/24 dev $rp3
+	ip address del 198.51.100.1/24 dev $rp2
+
+	ip address del 192.0.2.1/24 dev $rp1
+
+	ip link set dev $rp3 down
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	rp3=${NETIFS[p5]}
+	h3=${NETIFS[p6]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+	h3_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h3_destroy
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+bc_forwarding_disable()
+{
+	sysctl_set net.ipv4.conf.all.bc_forwarding 0
+	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 0
+}
+
+bc_forwarding_enable()
+{
+	sysctl_set net.ipv4.conf.all.bc_forwarding 1
+	sysctl_set net.ipv4.conf.$rp1.bc_forwarding 1
+}
+
+bc_forwarding_restore()
+{
+	sysctl_restore net.ipv4.conf.$rp1.bc_forwarding
+	sysctl_restore net.ipv4.conf.all.bc_forwarding
+}
+
+ping_test_from()
+{
+	local oif=$1
+	local dip=$2
+	local from=$3
+	local fail=${4:-0}
+
+	RET=0
+
+	log_info "ping $dip, expected reply from $from"
+	ip vrf exec $(master_name_get $oif) \
+	$PING -I $oif $dip -c 10 -i 0.1 -w 2 -b 2>&1 | grep $from &> /dev/null
+	check_err_fail $fail $?
+}
+
+ping_ipv4()
+{
+	sysctl_set net.ipv4.icmp_echo_ignore_broadcasts 0
+
+	bc_forwarding_disable
+	log_info "bc_forwarding disabled on r1 =>"
+	ping_test_from $h1 198.51.100.255 192.0.2.1
+	log_test "h1 -> net2: reply from r1 (not forwarding)"
+	ping_test_from $h1 198.51.200.255 192.0.2.1
+	log_test "h1 -> net3: reply from r1 (not forwarding)"
+	ping_test_from $h1 192.0.2.255 192.0.2.1
+	log_test "h1 -> net1: reply from r1 (not dropping)"
+	ping_test_from $h1 255.255.255.255 192.0.2.1
+	log_test "h1 -> 255.255.255.255: reply from r1 (not forwarding)"
+
+	ping_test_from $h2 192.0.2.255 198.51.100.1
+	log_test "h2 -> net1: reply from r1 (not forwarding)"
+	ping_test_from $h2 198.51.200.255 198.51.100.1
+	log_test "h2 -> net3: reply from r1 (not forwarding)"
+	ping_test_from $h2 198.51.100.255 198.51.100.1
+	log_test "h2 -> net2: reply from r1 (not dropping)"
+	ping_test_from $h2 255.255.255.255 198.51.100.1
+	log_test "h2 -> 255.255.255.255: reply from r1 (not forwarding)"
+	bc_forwarding_restore
+
+	bc_forwarding_enable
+	log_info "bc_forwarding enabled on r1 =>"
+	ping_test_from $h1 198.51.100.255 198.51.100.2
+	log_test "h1 -> net2: reply from h2 (forwarding)"
+	ping_test_from $h1 198.51.200.255 198.51.200.2
+	log_test "h1 -> net3: reply from h3 (forwarding)"
+	ping_test_from $h1 192.0.2.255 192.0.2.1 1
+	log_test "h1 -> net1: no reply (dropping)"
+	ping_test_from $h1 255.255.255.255 192.0.2.1
+	log_test "h1 -> 255.255.255.255: reply from r1 (not forwarding)"
+
+	ping_test_from $h2 192.0.2.255 192.0.2.2
+	log_test "h2 -> net1: reply from h1 (forwarding)"
+	ping_test_from $h2 198.51.200.255 198.51.200.2
+	log_test "h2 -> net3: reply from h3 (forwarding)"
+	ping_test_from $h2 198.51.100.255 198.51.100.1 1
+	log_test "h2 -> net2: no reply (dropping)"
+	ping_test_from $h2 255.255.255.255 198.51.100.1
+	log_test "h2 -> 255.255.255.255: reply from r1 (not forwarding)"
+	bc_forwarding_restore
+
+	sysctl_restore net.ipv4.icmp_echo_ignore_broadcasts
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/net/forwarding/router_multipath.sh b/tools/testing/selftests/net/forwarding/router_multipath.sh
index 8b6d0fb6d604..79a209927962 100755
--- a/tools/testing/selftests/net/forwarding/router_multipath.sh
+++ b/tools/testing/selftests/net/forwarding/router_multipath.sh
@@ -159,45 +159,6 @@ router2_destroy()
 	vrf_destroy "vrf-r2"
 }
 
-multipath_eval()
-{
-       local desc="$1"
-       local weight_rp12=$2
-       local weight_rp13=$3
-       local packets_rp12=$4
-       local packets_rp13=$5
-       local weights_ratio packets_ratio diff
-
-       RET=0
-
-       if [[ "$packets_rp12" -eq "0" || "$packets_rp13" -eq "0" ]]; then
-              check_err 1 "Packet difference is 0"
-              log_test "Multipath"
-              log_info "Expected ratio $weights_ratio"
-              return
-       fi
-
-       if [[ "$weight_rp12" -gt "$weight_rp13" ]]; then
-               weights_ratio=$(echo "scale=2; $weight_rp12 / $weight_rp13" \
-		       | bc -l)
-               packets_ratio=$(echo "scale=2; $packets_rp12 / $packets_rp13" \
-		       | bc -l)
-       else
-               weights_ratio=$(echo "scale=2; $weight_rp13 / $weight_rp12" | \
-		       bc -l)
-               packets_ratio=$(echo "scale=2; $packets_rp13 / $packets_rp12" | \
-		       bc -l)
-       fi
-
-       diff=$(echo $weights_ratio - $packets_ratio | bc -l)
-       diff=${diff#-}
-
-       test "$(echo "$diff / $weights_ratio > 0.15" | bc -l)" -eq 0
-       check_err $? "Too large discrepancy between expected and measured ratios"
-       log_test "$desc"
-       log_info "Expected ratio $weights_ratio Measured ratio $packets_ratio"
-}
-
 multipath4_test()
 {
        local desc="$1"
diff --git a/tools/testing/selftests/net/forwarding/tc_chains.sh b/tools/testing/selftests/net/forwarding/tc_chains.sh
index d2c783e94df3..2934fb5ed2a2 100755
--- a/tools/testing/selftests/net/forwarding/tc_chains.sh
+++ b/tools/testing/selftests/net/forwarding/tc_chains.sh
@@ -1,7 +1,8 @@
 #!/bin/bash
 # SPDX-License-Identifier: GPL-2.0
 
-ALL_TESTS="unreachable_chain_test gact_goto_chain_test"
+ALL_TESTS="unreachable_chain_test gact_goto_chain_test create_destroy_chain \
+	   template_filter_fits"
 NUM_NETIFS=2
 source tc_common.sh
 source lib.sh
@@ -80,6 +81,87 @@ gact_goto_chain_test()
 	log_test "gact goto chain ($tcflags)"
 }
 
+create_destroy_chain()
+{
+	RET=0
+
+	tc chain add dev $h2 ingress
+	check_err $? "Failed to create default chain"
+
+	output="$(tc -j chain get dev $h2 ingress)"
+	check_err $? "Failed to get default chain"
+
+	echo $output | jq -e ".[] | select(.chain == 0)" &> /dev/null
+	check_err $? "Unexpected output for default chain"
+
+	tc chain add dev $h2 ingress chain 1
+	check_err $? "Failed to create chain 1"
+
+	output="$(tc -j chain get dev $h2 ingress chain 1)"
+	check_err $? "Failed to get chain 1"
+
+	echo $output | jq -e ".[] | select(.chain == 1)" &> /dev/null
+	check_err $? "Unexpected output for chain 1"
+
+	output="$(tc -j chain show dev $h2 ingress)"
+	check_err $? "Failed to dump chains"
+
+	echo $output | jq -e ".[] | select(.chain == 0)" &> /dev/null
+	check_err $? "Can't find default chain in dump"
+
+	echo $output | jq -e ".[] | select(.chain == 1)" &> /dev/null
+	check_err $? "Can't find chain 1 in dump"
+
+	tc chain del dev $h2 ingress
+	check_err $? "Failed to destroy default chain"
+
+	tc chain del dev $h2 ingress chain 1
+	check_err $? "Failed to destroy chain 1"
+
+	log_test "create destroy chain"
+}
+
+template_filter_fits()
+{
+	RET=0
+
+	tc chain add dev $h2 ingress protocol ip \
+		flower dst_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+	tc chain add dev $h2 ingress chain 1 protocol ip \
+		flower src_mac 00:00:00:00:00:00/FF:FF:FF:FF:FF:FF &> /dev/null
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1101 \
+		flower dst_mac $h2mac action drop
+	check_err $? "Failed to insert filter which fits template"
+
+	tc filter add dev $h2 ingress protocol ip pref 1 handle 1102 \
+		flower src_mac $h2mac action drop &> /dev/null
+	check_fail $? "Incorrectly succeded to insert filter which does not template"
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower src_mac $h2mac action drop
+	check_err $? "Failed to insert filter which fits template"
+
+	tc filter add dev $h2 ingress chain 1 protocol ip pref 1 handle 1102 \
+		flower dst_mac $h2mac action drop &> /dev/null
+	check_fail $? "Incorrectly succeded to insert filter which does not template"
+
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1102 \
+		flower &> /dev/null
+	tc filter del dev $h2 ingress chain 1 protocol ip pref 1 handle 1101 \
+		flower &> /dev/null
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1102 \
+		flower &> /dev/null
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 1101 \
+		flower &> /dev/null
+
+	tc chain del dev $h2 ingress chain 1
+	tc chain del dev $h2 ingress
+
+	log_test "template filter fits"
+}
+
 setup_prepare()
 {
 	h1=${NETIFS[p1]}
@@ -103,6 +185,8 @@ cleanup()
 	vrf_cleanup
 }
 
+check_tc_chain_support
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/forwarding/tc_shblocks.sh b/tools/testing/selftests/net/forwarding/tc_shblocks.sh
index b5b917203815..9826a446e2c0 100755
--- a/tools/testing/selftests/net/forwarding/tc_shblocks.sh
+++ b/tools/testing/selftests/net/forwarding/tc_shblocks.sh
@@ -105,6 +105,8 @@ cleanup()
 	ip link set $swp2 address $swp2origmac
 }
 
+check_tc_shblock_support
+
 trap cleanup EXIT
 
 setup_prepare
diff --git a/tools/testing/selftests/net/ip6_gre_headroom.sh b/tools/testing/selftests/net/ip6_gre_headroom.sh
new file mode 100755
index 000000000000..5b41e8bb6e2d
--- /dev/null
+++ b/tools/testing/selftests/net/ip6_gre_headroom.sh
@@ -0,0 +1,65 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+#
+# Test that enough headroom is reserved for the first packet passing through an
+# IPv6 GRE-like netdevice.
+
+setup_prepare()
+{
+	ip link add h1 type veth peer name swp1
+	ip link add h3 type veth peer name swp3
+
+	ip link set dev h1 up
+	ip address add 192.0.2.1/28 dev h1
+
+	ip link add dev vh3 type vrf table 20
+	ip link set dev h3 master vh3
+	ip link set dev vh3 up
+	ip link set dev h3 up
+
+	ip link set dev swp3 up
+	ip address add dev swp3 2001:db8:2::1/64
+	ip address add dev swp3 2001:db8:2::3/64
+
+	ip link set dev swp1 up
+	tc qdisc add dev swp1 clsact
+
+	ip link add name er6 type ip6erspan \
+	   local 2001:db8:2::1 remote 2001:db8:2::2 oseq okey 123
+	ip link set dev er6 up
+
+	ip link add name gt6 type ip6gretap \
+	   local 2001:db8:2::3 remote 2001:db8:2::4
+	ip link set dev gt6 up
+
+	sleep 1
+}
+
+cleanup()
+{
+	ip link del dev gt6
+	ip link del dev er6
+	ip link del dev swp1
+	ip link del dev swp3
+	ip link del dev vh3
+}
+
+test_headroom()
+{
+	local type=$1; shift
+	local tundev=$1; shift
+
+	tc filter add dev swp1 ingress pref 1000 matchall skip_hw \
+		action mirred egress mirror dev $tundev
+	ping -I h1 192.0.2.2 -c 1 -w 2 &> /dev/null
+	tc filter del dev swp1 ingress pref 1000
+
+	# If it doesn't panic, it passes.
+	printf "TEST: %-60s  [PASS]\n" "$type headroom"
+}
+
+trap cleanup EXIT
+
+setup_prepare
+test_headroom ip6gretap gt6
+test_headroom ip6erspan er6
diff --git a/tools/testing/selftests/net/rtnetlink.sh b/tools/testing/selftests/net/rtnetlink.sh
index 0d7a44fa30af..08c341b49760 100755
--- a/tools/testing/selftests/net/rtnetlink.sh
+++ b/tools/testing/selftests/net/rtnetlink.sh
@@ -525,18 +525,21 @@ kci_test_macsec()
 #-------------------------------------------------------------------
 kci_test_ipsec()
 {
-	srcip="14.0.0.52"
-	dstip="14.0.0.70"
+	ret=0
 	algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
+	srcip=192.168.123.1
+	dstip=192.168.123.2
+	spi=7
+
+	ip addr add $srcip dev $devdummy
 
 	# flush to be sure there's nothing configured
 	ip x s flush ; ip x p flush
 	check_err $?
 
 	# start the monitor in the background
-	tmpfile=`mktemp ipsectestXXX`
-	ip x m > $tmpfile &
-	mpid=$!
+	tmpfile=`mktemp /var/run/ipsectestXXX`
+	mpid=`(ip x m > $tmpfile & echo $!) 2>/dev/null`
 	sleep 0.2
 
 	ipsecid="proto esp src $srcip dst $dstip spi 0x07"
@@ -599,6 +602,7 @@ kci_test_ipsec()
 	check_err $?
 	ip x p flush
 	check_err $?
+	ip addr del $srcip/32 dev $devdummy
 
 	if [ $ret -ne 0 ]; then
 		echo "FAIL: ipsec"
@@ -607,6 +611,119 @@ kci_test_ipsec()
 	echo "PASS: ipsec"
 }
 
+#-------------------------------------------------------------------
+# Example commands
+#   ip x s add proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07 replay-window 32 \
+#            aead 'rfc4106(gcm(aes))' 1234567890123456dcba 128 \
+#            sel src 14.0.0.52/24 dst 14.0.0.70/24
+#            offload dev sim1 dir out
+#   ip x p add dir out src 14.0.0.52/24 dst 14.0.0.70/24 \
+#            tmpl proto esp src 14.0.0.52 dst 14.0.0.70 \
+#            spi 0x07 mode transport reqid 0x07
+#
+#-------------------------------------------------------------------
+kci_test_ipsec_offload()
+{
+	ret=0
+	algo="aead rfc4106(gcm(aes)) 0x3132333435363738393031323334353664636261 128"
+	srcip=192.168.123.3
+	dstip=192.168.123.4
+	dev=simx1
+	sysfsd=/sys/kernel/debug/netdevsim/$dev
+	sysfsf=$sysfsd/ipsec
+
+	# setup netdevsim since dummydev doesn't have offload support
+	modprobe netdevsim
+	check_err $?
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload can't load netdevsim"
+		return 1
+	fi
+
+	ip link add $dev type netdevsim
+	ip addr add $srcip dev $dev
+	ip link set $dev up
+	if [ ! -d $sysfsd ] ; then
+		echo "FAIL: ipsec_offload can't create device $dev"
+		return 1
+	fi
+	if [ ! -f $sysfsf ] ; then
+		echo "FAIL: ipsec_offload netdevsim doesn't support IPsec offload"
+		return 1
+	fi
+
+	# flush to be sure there's nothing configured
+	ip x s flush ; ip x p flush
+
+	# create offloaded SAs, both in and out
+	ip x p add dir out src $srcip/24 dst $dstip/24 \
+	    tmpl proto esp src $srcip dst $dstip spi 9 \
+	    mode transport reqid 42
+	check_err $?
+	ip x p add dir out src $dstip/24 dst $srcip/24 \
+	    tmpl proto esp src $dstip dst $srcip spi 9 \
+	    mode transport reqid 42
+	check_err $?
+
+	ip x s add proto esp src $srcip dst $dstip spi 9 \
+	    mode transport reqid 42 $algo sel src $srcip/24 dst $dstip/24 \
+	    offload dev $dev dir out
+	check_err $?
+	ip x s add proto esp src $dstip dst $srcip spi 9 \
+	    mode transport reqid 42 $algo sel src $dstip/24 dst $srcip/24 \
+	    offload dev $dev dir in
+	check_err $?
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload can't create SA"
+		return 1
+	fi
+
+	# does offload show up in ip output
+	lines=`ip x s list | grep -c "crypto offload parameters: dev $dev dir"`
+	if [ $lines -ne 2 ] ; then
+		echo "FAIL: ipsec_offload SA offload missing from list output"
+		check_err 1
+	fi
+
+	# use ping to exercise the Tx path
+	ping -I $dev -c 3 -W 1 -i 0 $dstip >/dev/null
+
+	# does driver have correct offload info
+	diff $sysfsf - << EOF
+SA count=2 tx=3
+sa[0] tx ipaddr=0x00000000 00000000 00000000 00000000
+sa[0]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
+sa[0]    key=0x34333231 38373635 32313039 36353433
+sa[1] rx ipaddr=0x00000000 00000000 00000000 037ba8c0
+sa[1]    spi=0x00000009 proto=0x32 salt=0x61626364 crypt=1
+sa[1]    key=0x34333231 38373635 32313039 36353433
+EOF
+	if [ $? -ne 0 ] ; then
+		echo "FAIL: ipsec_offload incorrect driver data"
+		check_err 1
+	fi
+
+	# does offload get removed from driver
+	ip x s flush
+	ip x p flush
+	lines=`grep -c "SA count=0" $sysfsf`
+	if [ $lines -ne 1 ] ; then
+		echo "FAIL: ipsec_offload SA not removed from driver"
+		check_err 1
+	fi
+
+	# clean up any leftovers
+	ip link del $dev
+	rmmod netdevsim
+
+	if [ $ret -ne 0 ]; then
+		echo "FAIL: ipsec_offload"
+		return 1
+	fi
+	echo "PASS: ipsec_offload"
+}
+
 kci_test_gretap()
 {
 	testns="testns"
@@ -861,6 +978,7 @@ kci_test_rtnl()
 	kci_test_encap
 	kci_test_macsec
 	kci_test_ipsec
+	kci_test_ipsec_offload
 
 	kci_del_dummy
 }
diff --git a/tools/testing/selftests/net/tls.c b/tools/testing/selftests/net/tls.c
new file mode 100644
index 000000000000..b3ebf2646e52
--- /dev/null
+++ b/tools/testing/selftests/net/tls.c
@@ -0,0 +1,692 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#define _GNU_SOURCE
+
+#include <arpa/inet.h>
+#include <errno.h>
+#include <error.h>
+#include <fcntl.h>
+#include <poll.h>
+#include <stdio.h>
+#include <stdlib.h>
+#include <unistd.h>
+
+#include <linux/tls.h>
+#include <linux/tcp.h>
+#include <linux/socket.h>
+
+#include <sys/types.h>
+#include <sys/sendfile.h>
+#include <sys/socket.h>
+#include <sys/stat.h>
+
+#include "../kselftest_harness.h"
+
+#define TLS_PAYLOAD_MAX_LEN 16384
+#define SOL_TLS 282
+
+FIXTURE(tls)
+{
+	int fd, cfd;
+	bool notls;
+};
+
+FIXTURE_SETUP(tls)
+{
+	struct tls12_crypto_info_aes_gcm_128 tls12;
+	struct sockaddr_in addr;
+	socklen_t len;
+	int sfd, ret;
+
+	self->notls = false;
+	len = sizeof(addr);
+
+	memset(&tls12, 0, sizeof(tls12));
+	tls12.info.version = TLS_1_2_VERSION;
+	tls12.info.cipher_type = TLS_CIPHER_AES_GCM_128;
+
+	addr.sin_family = AF_INET;
+	addr.sin_addr.s_addr = htonl(INADDR_ANY);
+	addr.sin_port = 0;
+
+	self->fd = socket(AF_INET, SOCK_STREAM, 0);
+	sfd = socket(AF_INET, SOCK_STREAM, 0);
+
+	ret = bind(sfd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+	ret = listen(sfd, 10);
+	ASSERT_EQ(ret, 0);
+
+	ret = getsockname(sfd, &addr, &len);
+	ASSERT_EQ(ret, 0);
+
+	ret = connect(self->fd, &addr, sizeof(addr));
+	ASSERT_EQ(ret, 0);
+
+	ret = setsockopt(self->fd, IPPROTO_TCP, TCP_ULP, "tls", sizeof("tls"));
+	if (ret != 0) {
+		self->notls = true;
+		printf("Failure setting TCP_ULP, testing without tls\n");
+	}
+
+	if (!self->notls) {
+		ret = setsockopt(self->fd, SOL_TLS, TLS_TX, &tls12,
+				 sizeof(tls12));
+		ASSERT_EQ(ret, 0);
+	}
+
+	self->cfd = accept(sfd, &addr, &len);
+	ASSERT_GE(self->cfd, 0);
+
+	if (!self->notls) {
+		ret = setsockopt(self->cfd, IPPROTO_TCP, TCP_ULP, "tls",
+				 sizeof("tls"));
+		ASSERT_EQ(ret, 0);
+
+		ret = setsockopt(self->cfd, SOL_TLS, TLS_RX, &tls12,
+				 sizeof(tls12));
+		ASSERT_EQ(ret, 0);
+	}
+
+	close(sfd);
+}
+
+FIXTURE_TEARDOWN(tls)
+{
+	close(self->fd);
+	close(self->cfd);
+}
+
+TEST_F(tls, sendfile)
+{
+	int filefd = open("/proc/self/exe", O_RDONLY);
+	struct stat st;
+
+	EXPECT_GE(filefd, 0);
+	fstat(filefd, &st);
+	EXPECT_GE(sendfile(self->fd, filefd, 0, st.st_size), 0);
+}
+
+TEST_F(tls, send_then_sendfile)
+{
+	int filefd = open("/proc/self/exe", O_RDONLY);
+	char const *test_str = "test_send";
+	int to_send = strlen(test_str) + 1;
+	char recv_buf[10];
+	struct stat st;
+	char *buf;
+
+	EXPECT_GE(filefd, 0);
+	fstat(filefd, &st);
+	buf = (char *)malloc(st.st_size);
+
+	EXPECT_EQ(send(self->fd, test_str, to_send, 0), to_send);
+	EXPECT_EQ(recv(self->cfd, recv_buf, to_send, 0), to_send);
+	EXPECT_EQ(memcmp(test_str, recv_buf, to_send), 0);
+
+	EXPECT_GE(sendfile(self->fd, filefd, 0, st.st_size), 0);
+	EXPECT_EQ(recv(self->cfd, buf, st.st_size, 0), st.st_size);
+}
+
+TEST_F(tls, recv_max)
+{
+	unsigned int send_len = TLS_PAYLOAD_MAX_LEN;
+	char recv_mem[TLS_PAYLOAD_MAX_LEN];
+	char buf[TLS_PAYLOAD_MAX_LEN];
+
+	EXPECT_GE(send(self->fd, buf, send_len, 0), 0);
+	EXPECT_NE(recv(self->cfd, recv_mem, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, recv_mem, send_len), 0);
+}
+
+TEST_F(tls, recv_small)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10];
+
+	send_len = strlen(test_str) + 1;
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_F(tls, msg_more)
+{
+	char const *test_str = "test_read";
+	int send_len = 10;
+	char buf[10 * 2];
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, MSG_MORE), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, MSG_DONTWAIT), -1);
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len * 2, MSG_DONTWAIT),
+		  send_len * 2);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_F(tls, sendmsg_single)
+{
+	struct msghdr msg;
+
+	char const *test_str = "test_sendmsg";
+	size_t send_len = 13;
+	struct iovec vec;
+	char buf[13];
+
+	vec.iov_base = (char *)test_str;
+	vec.iov_len = send_len;
+	memset(&msg, 0, sizeof(struct msghdr));
+	msg.msg_iov = &vec;
+	msg.msg_iovlen = 1;
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, 0), send_len);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_F(tls, sendmsg_large)
+{
+	void *mem = malloc(16384);
+	size_t send_len = 16384;
+	size_t sends = 128;
+	struct msghdr msg;
+	size_t recvs = 0;
+	size_t sent = 0;
+
+	memset(&msg, 0, sizeof(struct msghdr));
+	while (sent++ < sends) {
+		struct iovec vec = { (void *)mem, send_len };
+
+		msg.msg_iov = &vec;
+		msg.msg_iovlen = 1;
+		EXPECT_EQ(sendmsg(self->cfd, &msg, 0), send_len);
+	}
+
+	while (recvs++ < sends)
+		EXPECT_NE(recv(self->fd, mem, send_len, 0), -1);
+
+	free(mem);
+}
+
+TEST_F(tls, sendmsg_multiple)
+{
+	char const *test_str = "test_sendmsg_multiple";
+	struct iovec vec[5];
+	char *test_strs[5];
+	struct msghdr msg;
+	int total_len = 0;
+	int len_cmp = 0;
+	int iov_len = 5;
+	char *buf;
+	int i;
+
+	memset(&msg, 0, sizeof(struct msghdr));
+	for (i = 0; i < iov_len; i++) {
+		test_strs[i] = (char *)malloc(strlen(test_str) + 1);
+		snprintf(test_strs[i], strlen(test_str) + 1, "%s", test_str);
+		vec[i].iov_base = (void *)test_strs[i];
+		vec[i].iov_len = strlen(test_strs[i]) + 1;
+		total_len += vec[i].iov_len;
+	}
+	msg.msg_iov = vec;
+	msg.msg_iovlen = iov_len;
+
+	EXPECT_EQ(sendmsg(self->cfd, &msg, 0), total_len);
+	buf = malloc(total_len);
+	EXPECT_NE(recv(self->fd, buf, total_len, 0), -1);
+	for (i = 0; i < iov_len; i++) {
+		EXPECT_EQ(memcmp(test_strs[i], buf + len_cmp,
+				 strlen(test_strs[i])),
+			  0);
+		len_cmp += strlen(buf + len_cmp) + 1;
+	}
+	for (i = 0; i < iov_len; i++)
+		free(test_strs[i]);
+	free(buf);
+}
+
+TEST_F(tls, sendmsg_multiple_stress)
+{
+	char const *test_str = "abcdefghijklmno";
+	struct iovec vec[1024];
+	char *test_strs[1024];
+	int iov_len = 1024;
+	int total_len = 0;
+	char buf[1 << 14];
+	struct msghdr msg;
+	int len_cmp = 0;
+	int i;
+
+	memset(&msg, 0, sizeof(struct msghdr));
+	for (i = 0; i < iov_len; i++) {
+		test_strs[i] = (char *)malloc(strlen(test_str) + 1);
+		snprintf(test_strs[i], strlen(test_str) + 1, "%s", test_str);
+		vec[i].iov_base = (void *)test_strs[i];
+		vec[i].iov_len = strlen(test_strs[i]) + 1;
+		total_len += vec[i].iov_len;
+	}
+	msg.msg_iov = vec;
+	msg.msg_iovlen = iov_len;
+
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), total_len);
+	EXPECT_NE(recv(self->cfd, buf, total_len, 0), -1);
+
+	for (i = 0; i < iov_len; i++)
+		len_cmp += strlen(buf + len_cmp) + 1;
+
+	for (i = 0; i < iov_len; i++)
+		free(test_strs[i]);
+}
+
+TEST_F(tls, splice_from_pipe)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char mem_send[TLS_PAYLOAD_MAX_LEN];
+	char mem_recv[TLS_PAYLOAD_MAX_LEN];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	EXPECT_GE(write(p[1], mem_send, send_len), 0);
+	EXPECT_GE(splice(p[0], NULL, self->fd, NULL, send_len, 0), 0);
+	EXPECT_GE(recv(self->cfd, mem_recv, send_len, 0), 0);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, splice_from_pipe2)
+{
+	int send_len = 16000;
+	char mem_send[16000];
+	char mem_recv[16000];
+	int p2[2];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	ASSERT_GE(pipe(p2), 0);
+	EXPECT_GE(write(p[1], mem_send, 8000), 0);
+	EXPECT_GE(splice(p[0], NULL, self->fd, NULL, 8000, 0), 0);
+	EXPECT_GE(write(p2[1], mem_send + 8000, 8000), 0);
+	EXPECT_GE(splice(p2[0], NULL, self->fd, NULL, 8000, 0), 0);
+	EXPECT_GE(recv(self->cfd, mem_recv, send_len, 0), 0);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, send_and_splice)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char mem_send[TLS_PAYLOAD_MAX_LEN];
+	char mem_recv[TLS_PAYLOAD_MAX_LEN];
+	char const *test_str = "test_read";
+	int send_len2 = 10;
+	char buf[10];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	EXPECT_EQ(send(self->fd, test_str, send_len2, 0), send_len2);
+	EXPECT_NE(recv(self->cfd, buf, send_len2, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len2), 0);
+
+	EXPECT_GE(write(p[1], mem_send, send_len), send_len);
+	EXPECT_GE(splice(p[0], NULL, self->fd, NULL, send_len, 0), send_len);
+
+	EXPECT_GE(recv(self->cfd, mem_recv, send_len, 0), 0);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, splice_to_pipe)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char mem_send[TLS_PAYLOAD_MAX_LEN];
+	char mem_recv[TLS_PAYLOAD_MAX_LEN];
+	int p[2];
+
+	ASSERT_GE(pipe(p), 0);
+	EXPECT_GE(send(self->fd, mem_send, send_len, 0), 0);
+	EXPECT_GE(splice(self->cfd, NULL, p[1], NULL, send_len, 0), 0);
+	EXPECT_GE(read(p[0], mem_recv, send_len), 0);
+	EXPECT_EQ(memcmp(mem_send, mem_recv, send_len), 0);
+}
+
+TEST_F(tls, recvmsg_single)
+{
+	char const *test_str = "test_recvmsg_single";
+	int send_len = strlen(test_str) + 1;
+	char buf[20];
+	struct msghdr hdr;
+	struct iovec vec;
+
+	memset(&hdr, 0, sizeof(hdr));
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	vec.iov_base = (char *)buf;
+	vec.iov_len = send_len;
+	hdr.msg_iovlen = 1;
+	hdr.msg_iov = &vec;
+	EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+}
+
+TEST_F(tls, recvmsg_single_max)
+{
+	int send_len = TLS_PAYLOAD_MAX_LEN;
+	char send_mem[TLS_PAYLOAD_MAX_LEN];
+	char recv_mem[TLS_PAYLOAD_MAX_LEN];
+	struct iovec vec;
+	struct msghdr hdr;
+
+	EXPECT_EQ(send(self->fd, send_mem, send_len, 0), send_len);
+	vec.iov_base = (char *)recv_mem;
+	vec.iov_len = TLS_PAYLOAD_MAX_LEN;
+
+	hdr.msg_iovlen = 1;
+	hdr.msg_iov = &vec;
+	EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1);
+	EXPECT_EQ(memcmp(send_mem, recv_mem, send_len), 0);
+}
+
+TEST_F(tls, recvmsg_multiple)
+{
+	unsigned int msg_iovlen = 1024;
+	unsigned int len_compared = 0;
+	struct iovec vec[1024];
+	char *iov_base[1024];
+	unsigned int iov_len = 16;
+	int send_len = 1 << 14;
+	char buf[1 << 14];
+	struct msghdr hdr;
+	int i;
+
+	EXPECT_EQ(send(self->fd, buf, send_len, 0), send_len);
+	for (i = 0; i < msg_iovlen; i++) {
+		iov_base[i] = (char *)malloc(iov_len);
+		vec[i].iov_base = iov_base[i];
+		vec[i].iov_len = iov_len;
+	}
+
+	hdr.msg_iovlen = msg_iovlen;
+	hdr.msg_iov = vec;
+	EXPECT_NE(recvmsg(self->cfd, &hdr, 0), -1);
+	for (i = 0; i < msg_iovlen; i++)
+		len_compared += iov_len;
+
+	for (i = 0; i < msg_iovlen; i++)
+		free(iov_base[i]);
+}
+
+TEST_F(tls, single_send_multiple_recv)
+{
+	unsigned int total_len = TLS_PAYLOAD_MAX_LEN * 2;
+	unsigned int send_len = TLS_PAYLOAD_MAX_LEN;
+	char send_mem[TLS_PAYLOAD_MAX_LEN * 2];
+	char recv_mem[TLS_PAYLOAD_MAX_LEN * 2];
+
+	EXPECT_GE(send(self->fd, send_mem, total_len, 0), 0);
+	memset(recv_mem, 0, total_len);
+
+	EXPECT_NE(recv(self->cfd, recv_mem, send_len, 0), -1);
+	EXPECT_NE(recv(self->cfd, recv_mem + send_len, send_len, 0), -1);
+	EXPECT_EQ(memcmp(send_mem, recv_mem, total_len), 0);
+}
+
+TEST_F(tls, multiple_send_single_recv)
+{
+	unsigned int total_len = 2 * 10;
+	unsigned int send_len = 10;
+	char recv_mem[2 * 10];
+	char send_mem[10];
+
+	EXPECT_GE(send(self->fd, send_mem, send_len, 0), 0);
+	EXPECT_GE(send(self->fd, send_mem, send_len, 0), 0);
+	memset(recv_mem, 0, total_len);
+	EXPECT_EQ(recv(self->cfd, recv_mem, total_len, 0), total_len);
+
+	EXPECT_EQ(memcmp(send_mem, recv_mem, send_len), 0);
+	EXPECT_EQ(memcmp(send_mem, recv_mem + send_len, send_len), 0);
+}
+
+TEST_F(tls, recv_partial)
+{
+	char const *test_str = "test_read_partial";
+	char const *test_str_first = "test_read";
+	char const *test_str_second = "_partial";
+	int send_len = strlen(test_str) + 1;
+	char recv_mem[18];
+
+	memset(recv_mem, 0, sizeof(recv_mem));
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_first), 0), -1);
+	EXPECT_EQ(memcmp(test_str_first, recv_mem, strlen(test_str_first)), 0);
+	memset(recv_mem, 0, sizeof(recv_mem));
+	EXPECT_NE(recv(self->cfd, recv_mem, strlen(test_str_second), 0), -1);
+	EXPECT_EQ(memcmp(test_str_second, recv_mem, strlen(test_str_second)),
+		  0);
+}
+
+TEST_F(tls, recv_nonblock)
+{
+	char buf[4096];
+	bool err;
+
+	EXPECT_EQ(recv(self->cfd, buf, sizeof(buf), MSG_DONTWAIT), -1);
+	err = (errno == EAGAIN || errno == EWOULDBLOCK);
+	EXPECT_EQ(err, true);
+}
+
+TEST_F(tls, recv_peek)
+{
+	char const *test_str = "test_read_peek";
+	int send_len = strlen(test_str) + 1;
+	char buf[15];
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	EXPECT_NE(recv(self->cfd, buf, send_len, MSG_PEEK), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+	memset(buf, 0, sizeof(buf));
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+}
+
+TEST_F(tls, recv_peek_multiple)
+{
+	char const *test_str = "test_read_peek";
+	int send_len = strlen(test_str) + 1;
+	unsigned int num_peeks = 100;
+	char buf[15];
+	int i;
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	for (i = 0; i < num_peeks; i++) {
+		EXPECT_NE(recv(self->cfd, buf, send_len, MSG_PEEK), -1);
+		EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+		memset(buf, 0, sizeof(buf));
+	}
+	EXPECT_NE(recv(self->cfd, buf, send_len, 0), -1);
+	EXPECT_EQ(memcmp(test_str, buf, send_len), 0);
+}
+
+TEST_F(tls, pollin)
+{
+	char const *test_str = "test_poll";
+	struct pollfd fd = { 0, 0, 0 };
+	char buf[10];
+	int send_len = 10;
+
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	fd.fd = self->cfd;
+	fd.events = POLLIN;
+
+	EXPECT_EQ(poll(&fd, 1, 20), 1);
+	EXPECT_EQ(fd.revents & POLLIN, 1);
+	EXPECT_EQ(recv(self->cfd, buf, send_len, 0), send_len);
+	/* Test timing out */
+	EXPECT_EQ(poll(&fd, 1, 20), 0);
+}
+
+TEST_F(tls, poll_wait)
+{
+	char const *test_str = "test_poll_wait";
+	int send_len = strlen(test_str) + 1;
+	struct pollfd fd = { 0, 0, 0 };
+	char recv_mem[15];
+
+	fd.fd = self->cfd;
+	fd.events = POLLIN;
+	EXPECT_EQ(send(self->fd, test_str, send_len, 0), send_len);
+	/* Set timeout to inf. secs */
+	EXPECT_EQ(poll(&fd, 1, -1), 1);
+	EXPECT_EQ(fd.revents & POLLIN, 1);
+	EXPECT_EQ(recv(self->cfd, recv_mem, send_len, 0), send_len);
+}
+
+TEST_F(tls, blocking)
+{
+	size_t data = 100000;
+	int res = fork();
+
+	EXPECT_NE(res, -1);
+
+	if (res) {
+		/* parent */
+		size_t left = data;
+		char buf[16384];
+		int status;
+		int pid2;
+
+		while (left) {
+			int res = send(self->fd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+
+		pid2 = wait(&status);
+		EXPECT_EQ(status, 0);
+		EXPECT_EQ(res, pid2);
+	} else {
+		/* child */
+		size_t left = data;
+		char buf[16384];
+
+		while (left) {
+			int res = recv(self->cfd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+	}
+}
+
+TEST_F(tls, nonblocking)
+{
+	size_t data = 100000;
+	int sendbuf = 100;
+	int flags;
+	int res;
+
+	flags = fcntl(self->fd, F_GETFL, 0);
+	fcntl(self->fd, F_SETFL, flags | O_NONBLOCK);
+	fcntl(self->cfd, F_SETFL, flags | O_NONBLOCK);
+
+	/* Ensure nonblocking behavior by imposing a small send
+	 * buffer.
+	 */
+	EXPECT_EQ(setsockopt(self->fd, SOL_SOCKET, SO_SNDBUF,
+			     &sendbuf, sizeof(sendbuf)), 0);
+
+	res = fork();
+	EXPECT_NE(res, -1);
+
+	if (res) {
+		/* parent */
+		bool eagain = false;
+		size_t left = data;
+		char buf[16384];
+		int status;
+		int pid2;
+
+		while (left) {
+			int res = send(self->fd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			if (res == -1 && errno == EAGAIN) {
+				eagain = true;
+				usleep(10000);
+				continue;
+			}
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+
+		EXPECT_TRUE(eagain);
+		pid2 = wait(&status);
+
+		EXPECT_EQ(status, 0);
+		EXPECT_EQ(res, pid2);
+	} else {
+		/* child */
+		bool eagain = false;
+		size_t left = data;
+		char buf[16384];
+
+		while (left) {
+			int res = recv(self->cfd, buf,
+				       left > 16384 ? 16384 : left, 0);
+
+			if (res == -1 && errno == EAGAIN) {
+				eagain = true;
+				usleep(10000);
+				continue;
+			}
+			EXPECT_GE(res, 0);
+			left -= res;
+		}
+		EXPECT_TRUE(eagain);
+	}
+}
+
+TEST_F(tls, control_msg)
+{
+	if (self->notls)
+		return;
+
+	char cbuf[CMSG_SPACE(sizeof(char))];
+	char const *test_str = "test_read";
+	int cmsg_len = sizeof(char);
+	char record_type = 100;
+	struct cmsghdr *cmsg;
+	struct msghdr msg;
+	int send_len = 10;
+	struct iovec vec;
+	char buf[10];
+
+	vec.iov_base = (char *)test_str;
+	vec.iov_len = 10;
+	memset(&msg, 0, sizeof(struct msghdr));
+	msg.msg_iov = &vec;
+	msg.msg_iovlen = 1;
+	msg.msg_control = cbuf;
+	msg.msg_controllen = sizeof(cbuf);
+	cmsg = CMSG_FIRSTHDR(&msg);
+	cmsg->cmsg_level = SOL_TLS;
+	/* test sending non-record types. */
+	cmsg->cmsg_type = TLS_SET_RECORD_TYPE;
+	cmsg->cmsg_len = CMSG_LEN(cmsg_len);
+	*CMSG_DATA(cmsg) = record_type;
+	msg.msg_controllen = cmsg->cmsg_len;
+
+	EXPECT_EQ(sendmsg(self->fd, &msg, 0), send_len);
+	/* Should fail because we didn't provide a control message */
+	EXPECT_EQ(recv(self->cfd, buf, send_len, 0), -1);
+
+	vec.iov_base = buf;
+	EXPECT_EQ(recvmsg(self->cfd, &msg, 0), send_len);
+	cmsg = CMSG_FIRSTHDR(&msg);
+	EXPECT_NE(cmsg, NULL);
+	EXPECT_EQ(cmsg->cmsg_level, SOL_TLS);
+	EXPECT_EQ(cmsg->cmsg_type, TLS_GET_RECORD_TYPE);
+	record_type = *((unsigned char *)CMSG_DATA(cmsg));
+	EXPECT_EQ(record_type, 100);
+	EXPECT_EQ(memcmp(buf, test_str, send_len), 0);
+}
+
+TEST_HARNESS_MAIN
diff --git a/tools/testing/selftests/tc-testing/README b/tools/testing/selftests/tc-testing/README
index 3a0336782d2d..49a6f8c3fdae 100644
--- a/tools/testing/selftests/tc-testing/README
+++ b/tools/testing/selftests/tc-testing/README
@@ -17,6 +17,10 @@ REQUIREMENTS
 *  The kernel must have veth support available, as a veth pair is created
    prior to running the tests.
 
+*  The kernel must have the appropriate infrastructure enabled to run all tdc
+   unit tests. See the config file in this directory for minimum required
+   features. As new tests will be added, config options list will be updated.
+
 *  All tc-related features being tested must be built in or available as
    modules.  To check what is required in current setup run:
    ./tdc.py -c
@@ -109,8 +113,8 @@ COMMAND LINE ARGUMENTS
 Run tdc.py -h to see the full list of available arguments.
 
 usage: tdc.py [-h] [-p PATH] [-D DIR [DIR ...]] [-f FILE [FILE ...]]
-              [-c [CATG [CATG ...]]] [-e ID [ID ...]] [-l] [-s] [-i] [-v]
-              [-d DEVICE] [-n NS] [-V]
+              [-c [CATG [CATG ...]]] [-e ID [ID ...]] [-l] [-s] [-i] [-v] [-N]
+              [-d DEVICE] [-P] [-n] [-V]
 
 Linux TC unit tests
 
@@ -118,8 +122,10 @@ optional arguments:
   -h, --help            show this help message and exit
   -p PATH, --path PATH  The full path to the tc executable to use
   -v, --verbose         Show the commands that are being run
+  -N, --notap           Suppress tap results for command under test
   -d DEVICE, --device DEVICE
                         Execute the test case in flower category
+  -P, --pause           Pause execution just before post-suite stage
 
 selection:
   select which test cases: files plus directories; filtered by categories
@@ -146,10 +152,10 @@ action:
   -i, --id              Generate ID numbers for new test cases
 
 netns:
-  options for nsPlugin(run commands in net namespace)
+  options for nsPlugin (run commands in net namespace)
 
-  -n NS, --namespace NS
-                        Run commands in namespace NS
+  -n, --namespace
+                        Run commands in namespace as specified in tdc_config.py
 
 valgrind:
   options for valgrindPlugin (run command under test under Valgrind)
diff --git a/tools/testing/selftests/tc-testing/config b/tools/testing/selftests/tc-testing/config
new file mode 100644
index 000000000000..203302065458
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/config
@@ -0,0 +1,48 @@
+CONFIG_NET_SCHED=y
+
+#
+# Queueing/Scheduling
+#
+CONFIG_NET_SCH_PRIO=m
+CONFIG_NET_SCH_INGRESS=m
+
+#
+# Classification
+#
+CONFIG_NET_CLS=y
+CONFIG_NET_CLS_FW=m
+CONFIG_NET_CLS_U32=m
+CONFIG_CLS_U32_PERF=y
+CONFIG_CLS_U32_MARK=y
+CONFIG_NET_EMATCH=y
+CONFIG_NET_EMATCH_STACK=32
+CONFIG_NET_EMATCH_CMP=m
+CONFIG_NET_EMATCH_NBYTE=m
+CONFIG_NET_EMATCH_U32=m
+CONFIG_NET_EMATCH_META=m
+CONFIG_NET_EMATCH_TEXT=m
+CONFIG_NET_EMATCH_IPSET=m
+CONFIG_NET_EMATCH_IPT=m
+CONFIG_NET_CLS_ACT=y
+CONFIG_NET_ACT_POLICE=m
+CONFIG_NET_ACT_GACT=m
+CONFIG_GACT_PROB=y
+CONFIG_NET_ACT_MIRRED=m
+CONFIG_NET_ACT_SAMPLE=m
+CONFIG_NET_ACT_IPT=m
+CONFIG_NET_ACT_NAT=m
+CONFIG_NET_ACT_PEDIT=m
+CONFIG_NET_ACT_SIMP=m
+CONFIG_NET_ACT_SKBEDIT=m
+CONFIG_NET_ACT_CSUM=m
+CONFIG_NET_ACT_VLAN=m
+CONFIG_NET_ACT_BPF=m
+CONFIG_NET_ACT_CONNMARK=m
+CONFIG_NET_ACT_SKBMOD=m
+CONFIG_NET_ACT_IFE=m
+CONFIG_NET_ACT_TUNNEL_KEY=m
+CONFIG_NET_IFE_SKBMARK=m
+CONFIG_NET_IFE_SKBPRIO=m
+CONFIG_NET_IFE_SKBTCINDEX=m
+CONFIG_NET_CLS_IND=y
+CONFIG_NET_SCH_FIFO=y
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json b/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json
index 70952bd98ff9..13147a1f5731 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/connmark.json
@@ -17,7 +17,7 @@
         "cmdUnderTest": "$TC actions add action connmark",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action connmark",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 pipe",
+        "matchPattern": "action order [0-9]+: connmark zone 0 pipe",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -41,7 +41,7 @@
         "cmdUnderTest": "$TC actions add action connmark pass index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action connmark index 1",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 pass.*index 1 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 0 pass.*index 1 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -65,7 +65,7 @@
         "cmdUnderTest": "$TC actions add action connmark drop index 100",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action connmark index 100",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 drop.*index 100 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 0 drop.*index 100 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -89,7 +89,7 @@
         "cmdUnderTest": "$TC actions add action connmark pipe index 455",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action connmark index 455",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 pipe.*index 455 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 0 pipe.*index 455 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -113,7 +113,7 @@
         "cmdUnderTest": "$TC actions add action connmark reclassify index 7",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action connmark",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 reclassify.*index 7 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 0 reclassify.*index 7 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -137,7 +137,7 @@
         "cmdUnderTest": "$TC actions add action connmark continue index 17",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action connmark",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 continue.*index 17 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 0 continue.*index 17 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -161,7 +161,7 @@
         "cmdUnderTest": "$TC actions add action connmark jump 10 index 17",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action connmark",
-        "matchPattern": "action order [0-9]+:  connmark zone 0 jump 10.*index 17 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 0 jump 10.*index 17 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -185,7 +185,7 @@
         "cmdUnderTest": "$TC actions add action connmark zone 100 pipe index 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action connmark index 1",
-        "matchPattern": "action order [0-9]+:  connmark zone 100 pipe.*index 1 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 100 pipe.*index 1 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -209,7 +209,7 @@
         "cmdUnderTest": "$TC actions add action connmark zone 65536 reclassify index 21",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action connmark index 1",
-        "matchPattern": "action order [0-9]+:  connmark zone 65536 reclassify.*index 21 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 65536 reclassify.*index 21 ref",
         "matchCount": "0",
         "teardown": [
             "$TC actions flush action connmark"
@@ -233,7 +233,7 @@
         "cmdUnderTest": "$TC actions add action connmark zone 655 unsupp_arg pass index 2",
         "expExitCode": "255",
         "verifyCmd": "$TC actions get action connmark index 2",
-        "matchPattern": "action order [0-9]+:  connmark zone 655 unsupp_arg pass.*index 2 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 655 unsupp_arg pass.*index 2 ref",
         "matchCount": "0",
         "teardown": [
             "$TC actions flush action connmark"
@@ -258,7 +258,7 @@
         "cmdUnderTest": "$TC actions replace action connmark zone 555 reclassify index 555",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action connmark index 555",
-        "matchPattern": "action order [0-9]+:  connmark zone 555 reclassify.*index 555 ref",
+        "matchPattern": "action order [0-9]+: connmark zone 555 reclassify.*index 555 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
@@ -282,7 +282,7 @@
         "cmdUnderTest": "$TC actions add action connmark zone 555 pipe index 5 cookie aabbccddeeff112233445566778800a1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action connmark index 5",
-        "matchPattern": "action order [0-9]+:  connmark zone 555 pipe.*index 5 ref.*cookie aabbccddeeff112233445566778800a1",
+        "matchPattern": "action order [0-9]+: connmark zone 555 pipe.*index 5 ref.*cookie aabbccddeeff112233445566778800a1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action connmark"
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
index 3a2f51fc7fd4..a022792d392a 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/csum.json
@@ -336,6 +336,30 @@
         ]
     },
     {
+        "id": "b10b",
+        "name": "Add all 7 csum actions",
+        "category": [
+            "actions",
+            "csum"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action csum",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action csum icmp ip4h sctp igmp udplite udp tcp index 7",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action csum index 7",
+        "matchPattern": "action order [0-9]*: csum \\(iph, icmp, igmp, tcp, udp, udplite, sctp\\).*index 7 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action csum"
+        ]
+    },
+    {
         "id": "ce92",
         "name": "Add csum udp action with cookie",
         "category": [
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
index 6e4edfae1799..db49fd0f8445 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/mirred.json
@@ -44,7 +44,8 @@
         "matchPattern": "action order [0-9]*: mirred \\(Egress Redirect to device lo\\).*index 2 ref",
         "matchCount": "1",
         "teardown": [
-            "$TC actions flush action mirred"
+            "$TC actions flush action mirred",
+            "$TC actions flush action gact"
         ]
     },
     {
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json b/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json
new file mode 100644
index 000000000000..0080dc2fd41c
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/nat.json
@@ -0,0 +1,593 @@
+[
+    {
+        "id": "7565",
+        "name": "Add nat action on ingress with default control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 192.168.1.1 200.200.200.1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat ingress 192.168.1.1/32 200.200.200.1 pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "fd79",
+        "name": "Add nat action on ingress with pipe control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 1.1.1.1 2.2.2.1 pipe index 77",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 77",
+        "matchPattern": "action order [0-9]+:  nat ingress 1.1.1.1/32 2.2.2.1 pipe.*index 77 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "eab9",
+        "name": "Add nat action on ingress with continue control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 192.168.10.10 192.168.20.20 continue index 1000",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 1000",
+        "matchPattern": "action order [0-9]+:  nat ingress 192.168.10.10/32 192.168.20.20 continue.*index 1000 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "c53a",
+        "name": "Add nat action on ingress with reclassify control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 192.168.10.10 192.168.20.20 reclassify index 1000",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 1000",
+        "matchPattern": "action order [0-9]+:  nat ingress 192.168.10.10/32 192.168.20.20 reclassify.*index 1000 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "76c9",
+        "name": "Add nat action on ingress with jump control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 12.18.10.10 12.18.20.20 jump 10 index 22",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 22",
+        "matchPattern": "action order [0-9]+:  nat ingress 12.18.10.10/32 12.18.20.20 jump 10.*index 22 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "24c6",
+        "name": "Add nat action on ingress with drop control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 1.18.1.1 1.18.2.2 drop index 722",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 722",
+        "matchPattern": "action order [0-9]+:  nat ingress 1.18.1.1/32 1.18.2.2 drop.*index 722 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "2120",
+        "name": "Add nat action on ingress with maximum index value",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 1.18.1.1 1.18.2.2 index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 4294967295",
+        "matchPattern": "action order [0-9]+:  nat ingress 1.18.1.1/32 1.18.2.2 pass.*index 4294967295 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "3e9d",
+        "name": "Add nat action on ingress with invalid index value",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 1.18.1.1 1.18.2.2 index 4294967295555",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action nat index 4294967295555",
+        "matchPattern": "action order [0-9]+:  nat ingress 1.18.1.1/32 1.18.2.2 pass.*index 4294967295555 ref",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ]
+    },
+    {
+        "id": "f6c9",
+        "name": "Add nat action on ingress with invalid IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 1.1.1.1 1.1888.2.2 index 7",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action nat index 7",
+        "matchPattern": "action order [0-9]+:  nat ingress 1.1.1.1/32 1.1888.2.2 pass.*index 7 ref",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ]
+    },
+    {
+        "id": "be25",
+        "name": "Add nat action on ingress with invalid argument",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 1.1.1.1 1.18.2.2 another_arg index 12",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action nat index 12",
+        "matchPattern": "action order [0-9]+:  nat ingress 1.1.1.1/32 1.18.2.2 pass.*another_arg.*index 12 ref",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ]
+    },
+    {
+        "id": "a7bd",
+        "name": "Add nat action on ingress with DEFAULT IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress default 10.10.10.1 index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 12",
+        "matchPattern": "action order [0-9]+:  nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "ee1e",
+        "name": "Add nat action on ingress with ANY IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress any 10.10.10.1 index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 12",
+        "matchPattern": "action order [0-9]+:  nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "1de8",
+        "name": "Add nat action on ingress with ALL IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress all 10.10.10.1 index 12",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 12",
+        "matchPattern": "action order [0-9]+:  nat ingress 0.0.0.0/32 10.10.10.1 pass.*index 12 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "8dba",
+        "name": "Add nat action on egress with default control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress 10.10.10.1 20.20.20.1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat egress 10.10.10.1/32 20.20.20.1 pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "19a7",
+        "name": "Add nat action on egress with pipe control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress 10.10.10.1 20.20.20.1 pipe",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat egress 10.10.10.1/32 20.20.20.1 pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "f1d9",
+        "name": "Add nat action on egress with continue control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress 10.10.10.1 20.20.20.1 continue",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat egress 10.10.10.1/32 20.20.20.1 continue",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "6d4a",
+        "name": "Add nat action on egress with reclassify control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress 10.10.10.1 20.20.20.1 reclassify",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat egress 10.10.10.1/32 20.20.20.1 reclassify",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "b313",
+        "name": "Add nat action on egress with jump control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress 10.10.10.1 20.20.20.1 jump 777",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat egress 10.10.10.1/32 20.20.20.1 jump 777",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "d9fc",
+        "name": "Add nat action on egress with drop control action",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress 10.10.10.1 20.20.20.1 drop",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions ls action nat",
+        "matchPattern": "action order [0-9]+:  nat egress 10.10.10.1/32 20.20.20.1 drop",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "a895",
+        "name": "Add nat action on egress with DEFAULT IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress default 20.20.20.1 pipe index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 10",
+        "matchPattern": "action order [0-9]+:  nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "2572",
+        "name": "Add nat action on egress with ANY IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress any 20.20.20.1 pipe index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 10",
+        "matchPattern": "action order [0-9]+:  nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "37f3",
+        "name": "Add nat action on egress with ALL IP address",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress all 20.20.20.1 pipe index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 10",
+        "matchPattern": "action order [0-9]+:  nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "6054",
+        "name": "Add nat action on egress with cookie",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat egress all 20.20.20.1 pipe index 10 cookie aa1bc2d3eeff112233445566778800a1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 10",
+        "matchPattern": "action order [0-9]+:  nat egress 0.0.0.0/32 20.20.20.1 pipe.*index 10 ref.*cookie aa1bc2d3eeff112233445566778800a1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    },
+    {
+        "id": "79d6",
+        "name": "Add nat action on ingress with cookie",
+        "category": [
+            "actions",
+            "nat"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action nat",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action nat ingress 192.168.1.1 10.10.10.1 reclassify index 1 cookie 112233445566778899aabbccddeeff11",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action nat index 1",
+        "matchPattern": "action order [0-9]+:  nat ingress 192.168.1.1/32 10.10.10.1 reclassify.*index 1 ref.*cookie 112233445566778899aabbccddeeff11",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action nat"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
index 37ecc2716fee..5aaf593b914a 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/skbedit.json
@@ -17,7 +17,7 @@
         "cmdUnderTest": "$TC actions add action skbedit mark 1",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit mark 1",
+        "matchPattern": "action order [0-9]*: skbedit  mark 1",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -65,7 +65,7 @@
         "cmdUnderTest": "$TC actions add action skbedit prio 99",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit priority :99",
+        "matchPattern": "action order [0-9]*: skbedit  priority :99",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -113,7 +113,7 @@
         "cmdUnderTest": "$TC actions add action skbedit queue_mapping 909",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 909",
+        "matchPattern": "action order [0-9]*: skbedit queue_mapping 909",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -161,7 +161,7 @@
         "cmdUnderTest": "$TC actions add action skbedit ptype host",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit ptype host",
+        "matchPattern": "action order [0-9]*: skbedit  ptype host",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -185,7 +185,7 @@
         "cmdUnderTest": "$TC actions add action skbedit ptype otherhost",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit ptype otherhost",
+        "matchPattern": "action order [0-9]*: skbedit  ptype otherhost",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -233,7 +233,7 @@
         "cmdUnderTest": "$TC actions add action skbedit ptype host pipe index 11",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 11",
-        "matchPattern": "action order [0-9]*:  skbedit ptype host pipe.*index 11 ref",
+        "matchPattern": "action order [0-9]*: skbedit  ptype host pipe.*index 11 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -257,7 +257,7 @@
         "cmdUnderTest": "$TC actions add action skbedit mark 56789 reclassify index 90",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 90",
-        "matchPattern": "action order [0-9]*:  skbedit mark 56789 reclassify.*index 90 ref",
+        "matchPattern": "action order [0-9]*: skbedit  mark 56789 reclassify.*index 90 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -281,7 +281,7 @@
         "cmdUnderTest": "$TC actions add action skbedit queue_mapping 3 pass index 271",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 271",
-        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 3 pass.*index 271 ref",
+        "matchPattern": "action order [0-9]*: skbedit queue_mapping 3 pass.*index 271 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -305,7 +305,7 @@
         "cmdUnderTest": "$TC actions add action skbedit queue_mapping 3 drop index 271",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 271",
-        "matchPattern": "action order [0-9]*:  skbedit queue_mapping 3 drop.*index 271 ref",
+        "matchPattern": "action order [0-9]*: skbedit queue_mapping 3 drop.*index 271 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -329,7 +329,7 @@
         "cmdUnderTest": "$TC actions add action skbedit priority 8 jump 9 index 2",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 2",
-        "matchPattern": "action order [0-9]*:  skbedit priority :8 jump 9.*index 2 ref",
+        "matchPattern": "action order [0-9]*: skbedit  priority :8 jump 9.*index 2 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -353,7 +353,7 @@
         "cmdUnderTest": "$TC actions add action skbedit priority 16 continue index 32",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 32",
-        "matchPattern": "action order [0-9]*:  skbedit priority :16 continue.*index 32 ref",
+        "matchPattern": "action order [0-9]*: skbedit  priority :16 continue.*index 32 ref",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -377,7 +377,7 @@
         "cmdUnderTest": "$TC actions add action skbedit priority 16 continue index 32 cookie deadbeef",
         "expExitCode": "0",
         "verifyCmd": "$TC actions get action skbedit index 32",
-        "matchPattern": "action order [0-9]*:  skbedit priority :16 continue.*index 32 ref.*cookie deadbeef",
+        "matchPattern": "action order [0-9]*: skbedit  priority :16 continue.*index 32 ref.*cookie deadbeef",
         "matchCount": "1",
         "teardown": [
             "$TC actions flush action skbedit"
@@ -405,7 +405,7 @@
         "cmdUnderTest": "$TC actions list action skbedit",
         "expExitCode": "0",
         "verifyCmd": "$TC actions list action skbedit",
-        "matchPattern": "action order [0-9]*:  skbedit",
+        "matchPattern": "action order [0-9]*: skbedit",
         "matchCount": "4",
         "teardown": [
             "$TC actions flush action skbedit"
diff --git a/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
new file mode 100644
index 000000000000..10b2d894e436
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/actions/tunnel_key.json
@@ -0,0 +1,917 @@
+[
+    {
+        "id": "2b11",
+        "name": "Add tunnel_key set action with mandatory parameters",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 id 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action tunnel_key",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2.*key_id 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "dc6b",
+        "name": "Add tunnel_key set action with missing mandatory src_ip parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set dst_ip 20.20.20.2 id 100",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action tunnel_key",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*dst_ip 20.20.20.2.*key_id 100",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "7f25",
+        "name": "Add tunnel_key set action with missing mandatory dst_ip parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 id 100",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action tunnel_key",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 10.10.10.1.*key_id 100",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "ba4e",
+        "name": "Add tunnel_key set action with missing mandatory id parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions list action tunnel_key",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "a5e0",
+        "name": "Add tunnel_key set action with invalid src_ip parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 300.168.100.1 dst_ip 192.168.200.1 id 7 index 1",
+        "expExitCode": "1",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 300.168.100.1.*dst_ip 192.168.200.1.*key_id 7.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "eaa8",
+        "name": "Add tunnel_key set action with invalid dst_ip parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 192.168.100.1 dst_ip 192.168.800.1 id 10 index 11",
+        "expExitCode": "1",
+        "verifyCmd": "$TC actions get action tunnel_key index 11",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 192.168.100.1.*dst_ip 192.168.800.1.*key_id 10.*index 11 ref",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "3b09",
+        "name": "Add tunnel_key set action with invalid id parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 112233445566778899 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 112233445566778899.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "9625",
+        "name": "Add tunnel_key set action with invalid dst_port parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 11 dst_port 998877 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 11.*dst_port 998877.*index 1 ref",
+        "matchCount": "0",
+        "teardown": [
+	    [
+		"$TC actions flush action tunnel_key",
+		0,
+		1,
+		255
+	    ]
+        ]
+    },
+    {
+        "id": "05af",
+        "name": "Add tunnel_key set action with optional dst_port parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 192.168.100.1 dst_ip 192.168.200.1 id 789 dst_port 4000 index 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 10",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 192.168.100.1.*dst_ip 192.168.200.1.*key_id 789.*dst_port 4000.*index 10 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "da80",
+        "name": "Add tunnel_key set action with index at 32-bit maximum",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 11 index 4294967295",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 4294967295",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*id 11.*index 4294967295 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "d407",
+        "name": "Add tunnel_key set action with index exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 11 index 4294967295678",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 4294967295678",
+        "matchPattern": "action order [0-9]+: tunnel_key set.*index 4294967295678 ref",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ]
+    },
+    {
+        "id": "5cba",
+        "name": "Add tunnel_key set action with id value at 32-bit maximum",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 4294967295 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 4294967295.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "e84a",
+        "name": "Add tunnel_key set action with id value exceeding 32-bit maximum",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42949672955 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 4294967295",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42949672955.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+	]
+    },
+    {
+        "id": "9c19",
+        "name": "Add tunnel_key set action with dst_port value at 16-bit maximum",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 429 dst_port 65535 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 429.*dst_port 65535.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "3bd9",
+        "name": "Add tunnel_key set action with dst_port value exceeding 16-bit maximum",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 429 dst_port 65535789 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 429.*dst_port 65535789.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+	]
+    },
+    {
+        "id": "68e2",
+        "name": "Add tunnel_key unset action",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key unset index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*unset.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "6192",
+        "name": "Add tunnel_key unset continue action",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key unset continue index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*unset continue.*index 1 ref",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "061d",
+        "name": "Add tunnel_key set continue action with cookie",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 192.168.10.1 dst_ip 192.168.20.2 id 123 continue index 1 cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 192.168.10.1.*dst_ip 192.168.20.2.*key_id 123.*csum continue.*index 1.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "8acb",
+        "name": "Add tunnel_key set continue action with invalid cookie",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 192.168.10.1 dst_ip 192.168.20.2 id 123 continue index 1 cookie aa11bb22cc33dd44ee55ff66aa11b1b2777888",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 192.168.10.1.*dst_ip 192.168.20.2.*key_id 123.*csum continue.*index 1.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2777888",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+	]
+    },
+    {
+        "id": "a07e",
+        "name": "Add tunnel_key action with no set/unset command specified",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key src_ip 10.10.10.1 dst_ip 20.20.20.2 id 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*src_ip 10.10.10.1.*dst_ip 20.20.20.2.*key_id 1",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ]
+    },
+    {
+        "id": "b227",
+        "name": "Add tunnel_key action with csum option",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 id 1 csum index 99",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 99",
+        "matchPattern": "action order [0-9]+: tunnel_key.*src_ip 10.10.10.1.*dst_ip 20.20.20.2.*key_id 1.*csum pipe.*index 99",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "58a7",
+        "name": "Add tunnel_key action with nocsum option",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7823 nocsum index 234",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 234",
+        "matchPattern": "action order [0-9]+: tunnel_key.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7823.*nocsum pipe.*index 234",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "2575",
+        "name": "Add tunnel_key action with not-supported parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7 foobar 999 index 4",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 4",
+        "matchPattern": "action order [0-9]+: tunnel_key.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*foobar 999.*index 4",
+        "matchCount": "0",
+        "teardown": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ]
+    },
+    {
+        "id": "7a88",
+        "name": "Add tunnel_key action with cookie parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 10.10.10.2 id 7 index 4 cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 4",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 10.10.10.2.*key_id 7.*dst_port 0.*csum pipe.*index 4 ref.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "4f20",
+        "name": "Add tunnel_key action with a single geneve option parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:00880022 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:00880022.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "e33d",
+        "name": "Add tunnel_key action with multiple geneve options parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:00880022,0408:42:0040007611223344,0111:02:1020304011223344 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:00880022,0408:42:0040007611223344,0111:02:1020304011223344.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "0778",
+        "name": "Add tunnel_key action with invalid class geneve option parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 824212:80:00880022 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 824212:80:00880022.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "4ae8",
+        "name": "Add tunnel_key action with invalid type geneve option parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:4224:00880022 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:4224:00880022.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "4039",
+        "name": "Add tunnel_key action with short data length geneve option parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:4288 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:4288.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "26a6",
+        "name": "Add tunnel_key action with non-multiple of 4 data length geneve option parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:4288428822 index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:4288428822.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "f44d",
+        "name": "Add tunnel_key action with incomplete geneve options parameter",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ]
+        ],
+        "cmdUnderTest": "$TC actions add action tunnel_key set src_ip 1.1.1.1 dst_ip 2.2.2.2 id 42 dst_port 6081 geneve_opts 0102:80:00880022,0408:42: index 1",
+        "expExitCode": "255",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 1.1.1.1.*dst_ip 2.2.2.2.*key_id 42.*dst_port 6081.*geneve_opt 0102:80:00880022,0408:42:.*index 1",
+        "matchCount": "0",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "7afc",
+        "name": "Replace tunnel_key set action with all parameters",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 dst_port 3128 csum id 1 index 1"
+        ],
+        "cmdUnderTest": "$TC actions replace action tunnel_key set src_ip 11.11.11.1 dst_ip 21.21.21.2 dst_port 3129 nocsum id 11 index 1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 11.11.11.1.*dst_ip 21.21.21.2.*key_id 11.*dst_port 3129.*nocsum pipe.*index 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "364d",
+        "name": "Replace tunnel_key set action with all parameters and cookie",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 dst_port 3128 nocsum id 1 index 1 cookie aabbccddeeff112233445566778800a"
+        ],
+        "cmdUnderTest": "$TC actions replace action tunnel_key set src_ip 11.11.11.1 dst_ip 21.21.21.2 dst_port 3129 id 11 csum reclassify index 1 cookie a1b1c1d1",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions get action tunnel_key index 1",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 11.11.11.1.*dst_ip 21.21.21.2.*key_id 11.*dst_port 3129.*csum reclassify.*index 1.*cookie a1b1c1d1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "937c",
+        "name": "Fetch all existing tunnel_key actions",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 dst_port 3128 nocsum id 1 pipe index 1",
+            "$TC actions add action tunnel_key set src_ip 11.10.10.1 dst_ip 21.20.20.2 dst_port 3129 csum id 2 jump 10 index 2",
+            "$TC actions add action tunnel_key set src_ip 12.10.10.1 dst_ip 22.20.20.2 dst_port 3130 csum id 3 pass index 3",
+            "$TC actions add action tunnel_key set src_ip 13.10.10.1 dst_ip 23.20.20.2 dst_port 3131 nocsum id 4 continue index 4"
+        ],
+        "cmdUnderTest": "$TC actions list action tunnel_key",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action tunnel_key",
+        "matchPattern": "action order [0-9]+: tunnel_key.*set.*src_ip 10.10.10.1.*dst_ip 20.20.20.2.*key_id 1.*dst_port 3128.*nocsum pipe.*index 1.*set.*src_ip 11.10.10.1.*dst_ip 21.20.20.2.*key_id 2.*dst_port 3129.*csum jump 10.*index 2.*set.*src_ip 12.10.10.1.*dst_ip 22.20.20.2.*key_id 3.*dst_port 3130.*csum pass.*index 3.*set.*src_ip 13.10.10.1.*dst_ip 23.20.20.2.*key_id 4.*dst_port 3131.*nocsum continue.*index 4",
+        "matchCount": "1",
+        "teardown": [
+            "$TC actions flush action tunnel_key"
+        ]
+    },
+    {
+        "id": "6783",
+        "name": "Flush all existing tunnel_key actions",
+        "category": [
+            "actions",
+            "tunnel_key"
+        ],
+        "setup": [
+            [
+                "$TC actions flush action tunnel_key",
+                0,
+                1,
+                255
+            ],
+            "$TC actions add action tunnel_key set src_ip 10.10.10.1 dst_ip 20.20.20.2 dst_port 3128 nocsum id 1 pipe index 1",
+            "$TC actions add action tunnel_key set src_ip 11.10.10.1 dst_ip 21.20.20.2 dst_port 3129 csum id 2 reclassify index 2",
+            "$TC actions add action tunnel_key set src_ip 12.10.10.1 dst_ip 22.20.20.2 dst_port 3130 csum id 3 pass index 3",
+            "$TC actions add action tunnel_key set src_ip 13.10.10.1 dst_ip 23.20.20.2 dst_port 3131 nocsum id 4 continue index 4"
+        ],
+        "cmdUnderTest": "$TC actions flush action tunnel_key",
+        "expExitCode": "0",
+        "verifyCmd": "$TC actions list action tunnel_key",
+        "matchPattern": "action order [0-9]+:.*",
+        "matchCount": "0",
+        "teardown": [
+	    "$TC actions flush action tunnel_key"
+	]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json b/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json
new file mode 100644
index 000000000000..3b97cfd7e0f8
--- /dev/null
+++ b/tools/testing/selftests/tc-testing/tc-tests/filters/fw.json
@@ -0,0 +1,1049 @@
+[
+    {
+        "id": "901f",
+        "name": "Add fw filter with prio at 32-bit maxixum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 65535 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 65535 protocol all fw",
+        "matchPattern": "pref 65535 fw.*handle 0x1.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "51e2",
+        "name": "Add fw filter with prio exceeding 32-bit maxixum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 65536 fw action ok",
+        "expExitCode": "255",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 65536 protocol all fw",
+        "matchPattern": "pref 65536 fw.*handle 0x1.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "d987",
+        "name": "Add fw filter with action ok",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "affe",
+        "name": "Add fw filter with action continue",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action continue",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action continue",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "28bc",
+        "name": "Add fw filter with action pipe",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action pipe",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "8da2",
+        "name": "Add fw filter with action drop",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action drop",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 protocol all prio 1 fw",
+        "matchPattern": "handle 0x1.*gact action drop",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "9436",
+        "name": "Add fw filter with action reclassify",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action reclassify",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action reclassify",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "95bb",
+        "name": "Add fw filter with action jump 10",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action jump 10",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action jump 10",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "3d74",
+        "name": "Add fw filter with action goto chain 5",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action goto chain 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action goto chain 5",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "eb8f",
+        "name": "Add fw filter with invalid action",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw action pump",
+        "expExitCode": "255",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "handle 0x1.*gact action pump",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "6a79",
+        "name": "Add fw filter with missing mandatory action",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "filter protocol all pref [0-9]+ fw.*handle 0x1",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "8298",
+        "name": "Add fw filter with cookie",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action pipe cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 2 protocol all fw",
+        "matchPattern": "pref 2 fw.*handle 0x1.*gact action pipe.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "a88c",
+        "name": "Add fw filter with invalid cookie",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action continue cookie aa11bb22cc33dd44ee55ff66aa11b1b2777888",
+        "expExitCode": "255",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 2 protocol all fw",
+        "matchPattern": "pref 2 fw.*handle 0x1.*gact action continue.*cookie aa11bb22cc33dd44ee55ff66aa11b1b2777888",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "10f6",
+        "name": "Add fw filter with handle in hex",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 0xa1b2ff prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 0xa1b2ff prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xa1b2ff.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "9d51",
+        "name": "Add fw filter with handle at 32-bit maximum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 4294967295 prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4294967295 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xffffffff.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "d939",
+        "name": "Add fw filter with handle exceeding 32-bit maximum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 4294967296 prio 1 fw action ok",
+        "expExitCode": "1",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4294967296 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0x.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "658c",
+        "name": "Add fw filter with mask in hex",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 10/0xa1b2f prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 10 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xa/0xa1b2f",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "86be",
+        "name": "Add fw filter with mask at 32-bit maximum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 10/4294967295 prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 10 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xa[^/]",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "e635",
+        "name": "Add fw filter with mask exceeding 32-bit maximum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 10/4294967296 prio 1 fw action ok",
+        "expExitCode": "1",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 10 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xa",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "6cab",
+        "name": "Add fw filter with handle/mask in hex",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 0xa1b2cdff/0x1a2bffdc prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 0xa1b2cdff prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xa1b2cdff/0x1a2bffdc",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "8700",
+        "name": "Add fw filter with handle/mask at 32-bit maximum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 4294967295/4294967295 prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 0xffffffff prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0xffffffff[^/]",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "7d62",
+        "name": "Add fw filter with handle/mask exceeding 32-bit maximum",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 4294967296/4294967296 prio 1 fw action ok",
+        "expExitCode": "1",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 10 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "7b69",
+        "name": "Add fw filter with missing mandatory handle",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 1 fw action ok",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "filter protocol all.*fw.*handle.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "d68b",
+        "name": "Add fw filter with invalid parent",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent aa11b1b2: handle 1 prio 1 fw action ok",
+        "expExitCode": "255",
+        "verifyCmd": "$TC filter dev $DEV1 parent aa11b1b2: handle 1 prio 1 protocol all fw",
+        "matchPattern": "filter protocol all pref 1 fw.*handle 0x1.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "66e0",
+        "name": "Add fw filter with missing mandatory parent id",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 handle 1 prio 1 fw action ok",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "pref [0-9]+ fw.*handle 0x1.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "0ff3",
+        "name": "Add fw filter with classid",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw classid 3 action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0x1 classid :3.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "9849",
+        "name": "Add fw filter with classid at root",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw classid ffff:ffff action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "pref 1 fw.*handle 0x1 classid root.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "b7ff",
+        "name": "Add fw filter with classid - keeps last 8 (hex) digits",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw classid 98765fedcb action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0x1 classid 765f:edcb.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "2b18",
+        "name": "Add fw filter with invalid classid",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 1 prio 1 fw classid 6789defg action ok",
+        "expExitCode": "1",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol all fw",
+        "matchPattern": "fw.*handle 0x1 classid 6789:defg.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "fade",
+        "name": "Add fw filter with flowid",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 10 prio 1 fw flowid 1:10 action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 10 prio 1 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 1 fw.*handle 0xa classid 1:10.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "33af",
+        "name": "Add fw filter with flowid then classid (same arg, takes second)",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 11 prio 1 fw flowid 10 classid 4 action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 11 prio 1 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 1 fw.*handle 0xb classid :4.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "8a8c",
+        "name": "Add fw filter with classid then flowid (same arg, takes second)",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: handle 11 prio 1 fw classid 4 flowid 10 action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 11 prio 1 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 1 fw.*handle 0xb classid :10.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "b50d",
+        "name": "Add fw filter with handle val/mask and flowid 10:1000",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 handle 10/0xff fw flowid 10:1000 action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 10 prio 3 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 3 fw.*handle 0xa/0xff classid 10:1000.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "7207",
+        "name": "Add fw filter with protocol ip",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol ip prio 1 handle 3 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 3 prio 1 protocol ip fw",
+        "matchPattern": "filter parent ffff: protocol ip pref 1 fw.*handle 0x3.*gact action pass.*index [0-9]+ ref [0-9]+ bind [0-9]+",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "306d",
+        "name": "Add fw filter with protocol ipv6",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol ipv6 prio 2 handle 4 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4 prio 2 protocol ipv6 fw",
+        "matchPattern": "filter parent ffff: protocol ipv6 pref 2 fw.*handle 0x4.*gact action pass.*index [0-9]+ ref [0-9]+ bind [0-9]+",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "9a78",
+        "name": "Add fw filter with protocol arp",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol arp prio 5 handle 7 fw action drop",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 7 prio 5 protocol arp fw",
+        "matchPattern": "filter parent ffff: protocol arp pref 5 fw.*handle 0x7.*gact action drop.*index [0-9]+ ref [0-9]+ bind [0-9]+",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "1821",
+        "name": "Add fw filter with protocol 802_3",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol 802_3 handle 1 prio 1 fw action ok",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol 802_3 fw",
+        "matchPattern": "filter parent ffff: protocol 802_3 pref 1 fw.*handle 0x1.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "2260",
+        "name": "Add fw filter with invalid protocol",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol igmp handle 1 prio 1 fw action ok",
+        "expExitCode": "255",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 1 prio 1 protocol igmp fw",
+        "matchPattern": "filter parent ffff: protocol igmp pref 1 fw.*handle 0x1.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "09d7",
+        "name": "Add fw filters protocol 802_3 and ip with conflicting priorities",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: protocol 802_3 prio 3 handle 7 fw action ok"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol ip prio 3 handle 8 fw action ok",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 8 prio 3 protocol ip fw",
+        "matchPattern": "filter parent ffff: protocol ip pref 3 fw.*handle 0x8",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "6973",
+        "name": "Add fw filters with same index, same action",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: prio 6 handle 2 fw action continue index 5"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 8 handle 4 fw action continue index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4 prio 8 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 8 fw.*handle 0x4.*gact action continue.*index 5 ref 2 bind 2",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "fc06",
+        "name": "Add fw filters with action police",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 handle 4 fw action police rate 1kbit burst 10k index 5",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4 prio 3 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 3 fw.*handle 0x4.*police 0x5 rate 1Kbit burst 10Kb mtu 2Kb action reclassify overhead 0b.*ref 1 bind 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "aac7",
+        "name": "Add fw filters with action police linklayer atm",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress"
+        ],
+        "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: prio 3 handle 4 fw action police rate 2mbit burst 200k linklayer atm index 8",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4 prio 3 protocol all fw",
+        "matchPattern": "filter parent ffff: protocol all pref 3 fw.*handle 0x4.*police 0x8 rate 2Mbit burst 200Kb mtu 2Kb action reclassify overhead 0b linklayer atm.*ref 1 bind 1",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "5339",
+        "name": "Del entire fw filter",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 5 prio 7 fw action pass",
+            "$TC filter add dev $DEV1 parent ffff: handle 3 prio 9 fw action pass"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff:",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "protocol all pref.*handle.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "0e99",
+        "name": "Del single fw filter x1",
+        "__comment__": "First of two tests to check that one filter is there and the other isn't",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 5 prio 7 fw action pass",
+            "$TC filter add dev $DEV1 parent ffff: handle 3 prio 9 fw action pass"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: handle 3 prio 9 fw action pass",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "protocol all pref 7.*handle 0x5.*gact action pass",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "f54c",
+        "name": "Del single fw filter x2",
+        "__comment__": "Second of two tests to check that one filter is there and the other isn't",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 5 prio 7 fw action pass",
+            "$TC filter add dev $DEV1 parent ffff: handle 3 prio 9 fw action pass"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: handle 3 prio 9 fw action pass",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "protocol all pref 9.*handle 0x3.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "ba94",
+        "name": "Del fw filter by prio",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 1 prio 4 fw action ok",
+            "$TC filter add dev $DEV1 parent ffff: handle 2 prio 4 fw action ok"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: prio 4",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "pref 4 fw.*gact action pass",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "4acb",
+        "name": "Del fw filter by chain",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 4 prio 2 chain 13 fw action pipe",
+            "$TC filter add dev $DEV1 parent ffff: handle 3 prio 5 chain 13 fw action pipe"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: chain 13",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "fw chain 13 handle.*gact action pipe",
+        "matchCount": "0",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "3424",
+        "name": "Del fw filter by action (invalid)",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 2 prio 4 fw action drop"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: fw action drop",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 2 prio 4 protocol all fw",
+        "matchPattern": "handle 0x2.*gact action drop",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "da89",
+        "name": "Del fw filter by handle (invalid)",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 3 prio 4 fw action continue"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: handle 3 fw",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 3 prio 4 protocol all fw",
+        "matchPattern": "handle 0x3.*gact action continue",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "4d95",
+        "name": "Del fw filter by protocol (invalid)",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 4 prio 2 protocol arp fw action pipe"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: protocol arp fw",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter get dev $DEV1 parent ffff: handle 4 prio 2 protocol arp fw",
+        "matchPattern": "filter parent ffff: protocol arp.*handle 0x4.*gact action pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "4736",
+        "name": "Del fw filter by flowid (invalid)",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 4 prio 2 fw action pipe flowid 45"
+        ],
+        "cmdUnderTest": "$TC filter del dev $DEV1 parent ffff: fw flowid 45",
+        "expExitCode": "2",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "handle 0x4.*gact action pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "3dcb",
+        "name": "Replace fw filter action",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action ok"
+        ],
+        "cmdUnderTest": "$TC filter replace dev $DEV1 parent ffff: handle 1 prio 2 fw action pipe",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "pref 2 fw.*handle 0x1.*gact action pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "eb4d",
+        "name": "Replace fw filter classid",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action ok"
+        ],
+        "cmdUnderTest": "$TC filter replace dev $DEV1 parent ffff: handle 1 prio 2 fw action pipe classid 2",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "pref 2 fw.*handle 0x1 classid :2.*gact action pipe",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    },
+    {
+        "id": "67ec",
+        "name": "Replace fw filter index",
+        "category": [
+            "filter",
+            "fw"
+        ],
+        "setup": [
+            "$TC qdisc add dev $DEV1 ingress",
+            "$TC filter add dev $DEV1 parent ffff: handle 1 prio 2 fw action ok index 3"
+        ],
+        "cmdUnderTest": "$TC filter replace dev $DEV1 parent ffff: handle 1 prio 2 fw action ok index 16",
+        "expExitCode": "0",
+        "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
+        "matchPattern": "pref 2 fw.*handle 0x1.*gact action pass.*index 16",
+        "matchCount": "1",
+        "teardown": [
+            "$TC qdisc del dev $DEV1 ingress"
+        ]
+    }
+]
diff --git a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json
index 5fa02d86b35f..99a5ffca1088 100644
--- a/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json
+++ b/tools/testing/selftests/tc-testing/tc-tests/filters/tests.json
@@ -12,8 +12,8 @@
         "cmdUnderTest": "$TC filter add dev $DEV1 parent ffff: protocol ip prio 1 u32 match ip src 127.0.0.1/32 flowid 1:1 action ok",
         "expExitCode": "0",
         "verifyCmd": "$TC filter show dev $DEV1 parent ffff:",
-        "matchPattern": "match 7f000002/ffffffff at 12",
-        "matchCount": "0",
+        "matchPattern": "match 7f000001/ffffffff at 12",
+        "matchCount": "1",
         "teardown": [
             "$TC qdisc del dev $DEV1 ingress"
         ]
author	Linus Torvalds <torvalds@linux-foundation.org>	2018-08-15 15:04:25 -0700
committer	Linus Torvalds <torvalds@linux-foundation.org>	2018-08-15 15:04:25 -0700
commit	9a76aba02a37718242d7cdc294f0a3901928aa57 (patch)
tree	2040d038f85d2120f21af83b0793efd5af1864e3 /tools/testing/selftests
parent	x86: i8259: Add missing include file (diff)
parent	bpf: test: fix spelling mistake "REUSEEPORT" -> "REUSEPORT" (diff)
download	linux-dev-9a76aba02a37718242d7cdc294f0a3901928aa57.tar.xz linux-dev-9a76aba02a37718242d7cdc294f0a3901928aa57.zip