Merge branch 'bpf-dump-and-disasm-nfp-jit'

Jakub Kicinski says:

====================
Jiong says:

Currently bpftool could disassemble host jited image, for example x86_64,
using libbfd. However it couldn't disassemble offload jited image.

There are two reasons:

  1. bpf_obj_get_info_by_fd/struct bpf_prog_info couldn't get the address
     of jited image and image's length.

  2. Even after issue 1 resolved, bpftool couldn't figure out what is the
     offload arch from bpf_prog_info, therefore can't drive libbfd
     disassembler correctly.

  This patch set resolve issue 1 by introducing two new fields "jited_len"
and "jited_image" in bpf_dev_offload. These two fields serve as the generic
interface to communicate the jited image address and length for all offload
targets to higher level caller. For example, bpf_obj_get_info_by_fd could
use them to fill the userspace visible fields jited_prog_len and
jited_prog_insns.

  This patch set resolve issue 2 by getting bfd backend name through
"ifindex", i.e network interface index.

v1:
 - Deduct bfd arch name through ifindex, i.e network interface index.
   First, map ifindex to devname through ifindex_to_name_ns, then get
   pci id through /sys/class/dev/DEVNAME/device/vendor. (Daniel, Alexei)
====================

Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

4 files changed, 102 insertions, 3 deletions

diff --git a/tools/bpf/bpftool/common.c b/tools/bpf/bpftool/common.c
index 6601c95a9258..0b482c0070e0 100644
--- a/tools/bpf/bpftool/common.c
+++ b/tools/bpf/bpftool/common.c
@@ -34,6 +34,7 @@
 /* Author: Jakub Kicinski <kubakici@wp.pl> */
 
 #include <errno.h>
+#include <fcntl.h>
 #include <fts.h>
 #include <libgen.h>
 #include <mntent.h>
@@ -433,6 +434,77 @@ ifindex_to_name_ns(__u32 ifindex, __u32 ns_dev, __u32 ns_ino, char *buf)
 	return if_indextoname(ifindex, buf);
 }
 
+static int read_sysfs_hex_int(char *path)
+{
+	char vendor_id_buf[8];
+	int len;
+	int fd;
+
+	fd = open(path, O_RDONLY);
+	if (fd < 0) {
+		p_err("Can't open %s: %s", path, strerror(errno));
+		return -1;
+	}
+
+	len = read(fd, vendor_id_buf, sizeof(vendor_id_buf));
+	close(fd);
+	if (len < 0) {
+		p_err("Can't read %s: %s", path, strerror(errno));
+		return -1;
+	}
+	if (len >= (int)sizeof(vendor_id_buf)) {
+		p_err("Value in %s too long", path);
+		return -1;
+	}
+
+	vendor_id_buf[len] = 0;
+
+	return strtol(vendor_id_buf, NULL, 0);
+}
+
+static int read_sysfs_netdev_hex_int(char *devname, const char *entry_name)
+{
+	char full_path[64];
+
+	snprintf(full_path, sizeof(full_path), "/sys/class/net/%s/device/%s",
+		 devname, entry_name);
+
+	return read_sysfs_hex_int(full_path);
+}
+
+const char *ifindex_to_bfd_name_ns(__u32 ifindex, __u64 ns_dev, __u64 ns_ino)
+{
+	char devname[IF_NAMESIZE];
+	int vendor_id;
+	int device_id;
+
+	if (!ifindex_to_name_ns(ifindex, ns_dev, ns_ino, devname)) {
+		p_err("Can't get net device name for ifindex %d: %s", ifindex,
+		      strerror(errno));
+		return NULL;
+	}
+
+	vendor_id = read_sysfs_netdev_hex_int(devname, "vendor");
+	if (vendor_id < 0) {
+		p_err("Can't get device vendor id for %s", devname);
+		return NULL;
+	}
+
+	switch (vendor_id) {
+	case 0x19ee:
+		device_id = read_sysfs_netdev_hex_int(devname, "device");
+		if (device_id != 0x4000 &&
+		    device_id != 0x6000 &&
+		    device_id != 0x6003)
+			p_info("Unknown NFP device ID, assuming it is NFP-6xxx arch");
+		return "NFP-6xxx";
+	default:
+		p_err("Can't get bfd arch name for device vendor id 0x%04x",
+		      vendor_id);
+		return NULL;
+	}
+}
+
 void print_dev_plain(__u32 ifindex, __u64 ns_dev, __u64 ns_inode)
 {
 	char name[IF_NAMESIZE];
diff --git a/tools/bpf/bpftool/jit_disasm.c b/tools/bpf/bpftool/jit_disasm.c
index 57d32e8a1391..87439320ef70 100644
--- a/tools/bpf/bpftool/jit_disasm.c
+++ b/tools/bpf/bpftool/jit_disasm.c
@@ -76,7 +76,8 @@ static int fprintf_json(void *out, const char *fmt, ...)
 	return 0;
 }
 
-void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes)
+void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,
+		       const char *arch)
 {
 	disassembler_ftype disassemble;
 	struct disassemble_info info;
@@ -100,6 +101,19 @@ void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes)
 	else
 		init_disassemble_info(&info, stdout,
 				      (fprintf_ftype) fprintf);
+
+	/* Update architecture info for offload. */
+	if (arch) {
+		const bfd_arch_info_type *inf = bfd_scan_arch(arch);
+
+		if (inf) {
+			bfdf->arch_info = inf;
+		} else {
+			p_err("No libfd support for %s", arch);
+			return;
+		}
+	}
+
 	info.arch = bfd_get_arch(bfdf);
 	info.mach = bfd_get_mach(bfdf);
 	info.buffer = image;
diff --git a/tools/bpf/bpftool/main.h b/tools/bpf/bpftool/main.h
index 65b526fe6e7e..b8e9584d6246 100644
--- a/tools/bpf/bpftool/main.h
+++ b/tools/bpf/bpftool/main.h
@@ -121,7 +121,10 @@ int do_cgroup(int argc, char **arg);
 
 int prog_parse_fd(int *argc, char ***argv);
 
-void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes);
+void disasm_print_insn(unsigned char *image, ssize_t len, int opcodes,
+		       const char *arch);
 void print_hex_data_json(uint8_t *data, size_t len);
 
+const char *ifindex_to_bfd_name_ns(__u32 ifindex, __u64 ns_dev, __u64 ns_ino);
+
 #endif
diff --git a/tools/bpf/bpftool/prog.c b/tools/bpf/bpftool/prog.c
index 099e21cf1b5c..e8e2baaf93c2 100644
--- a/tools/bpf/bpftool/prog.c
+++ b/tools/bpf/bpftool/prog.c
@@ -776,7 +776,17 @@ static int do_dump(int argc, char **argv)
 		}
 	} else {
 		if (member_len == &info.jited_prog_len) {
-			disasm_print_insn(buf, *member_len, opcodes);
+			const char *name = NULL;
+
+			if (info.ifindex) {
+				name = ifindex_to_bfd_name_ns(info.ifindex,
+							      info.netns_dev,
+							      info.netns_ino);
+				if (!name)
+					goto err_free;
+			}
+
+			disasm_print_insn(buf, *member_len, opcodes, name);
 		} else {
 			kernel_syms_load(&dd);
 			if (json_output)