diff options
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 20 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/mmc/mmc.txt | 14 |
2 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt new file mode 100644 index 000000000000..da333d9ed94c --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt @@ -0,0 +1,20 @@ +* The simple MMC power sequence provider + +The purpose of the simple MMC power sequence provider is to supports a set of +common properties between various SOC designs. It thus enables us to use the +same provider for several SOC designs. + +Required properties: +- compatible : contains "mmc-pwrseq-simple". + +Optional properties: +- reset-gpios : contains a GPIO specifier. The reset GPIO is asserted at + initialization and prior we start the power up procedure of the card. It + will be de-asserted right after the power has been provided to the card. + +Example: + + sdhci0_pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpio1 12 0>; + } diff --git a/Documentation/devicetree/bindings/mmc/mmc.txt b/Documentation/devicetree/bindings/mmc/mmc.txt index bac131169c07..438899e8829b 100644 --- a/Documentation/devicetree/bindings/mmc/mmc.txt +++ b/Documentation/devicetree/bindings/mmc/mmc.txt @@ -65,6 +65,18 @@ Optional SDIO properties: - enable-sdio-wakeup: Enables wake up of host system on SDIO IRQ assertion +MMC power sequences: +-------------------- + +System on chip designs may specify a specific MMC power sequence. To +successfully detect an (e)MMC/SD/SDIO card, that power sequence must be +maintained while initializing the card. + +Optional property: +- mmc-pwrseq: phandle to the MMC power sequence node. See "mmc-pwrseq-*" + for documentation of MMC power sequence bindings. + + Use of Function subnodes ------------------------ @@ -101,6 +113,7 @@ sdhci@ab000000 { max-frequency = <50000000>; keep-power-in-suspend; enable-sdio-wakeup; + mmc-pwrseq = <&sdhci0_pwrseq> } Example with sdio function subnode: @@ -114,6 +127,7 @@ mmc3: mmc@01c12000 { vmmc-supply = <®_vmmc3>; bus-width = <4>; non-removable; + mmc-pwrseq = <&sdhci0_pwrseq> status = "okay"; brcmf: bcrmf@1 { |