diff options
| -rw-r--r-- | Documentation/devicetree/bindings/spi/spi-controller.yaml | 1 | ||||
| -rw-r--r-- | drivers/spi/spi-bcm2835.c | 3 | ||||
| -rw-r--r-- | drivers/spi/spi-fsl-qspi.c | 2 | ||||
| -rw-r--r-- | drivers/spi/spi-gpio.c | 6 | ||||
| -rw-r--r-- | drivers/spi/spi-pxa2xx.c | 14 |
5 files changed, 21 insertions, 5 deletions
diff --git a/Documentation/devicetree/bindings/spi/spi-controller.yaml b/Documentation/devicetree/bindings/spi/spi-controller.yaml index 876c0623f322..a02e2fe2bfb2 100644 --- a/Documentation/devicetree/bindings/spi/spi-controller.yaml +++ b/Documentation/devicetree/bindings/spi/spi-controller.yaml @@ -73,7 +73,6 @@ patternProperties: Compatible of the SPI device. reg: - maxItems: 1 minimum: 0 maximum: 256 description: diff --git a/drivers/spi/spi-bcm2835.c b/drivers/spi/spi-bcm2835.c index 6f243a90c844..840b1b8ff3dc 100644 --- a/drivers/spi/spi-bcm2835.c +++ b/drivers/spi/spi-bcm2835.c @@ -834,7 +834,8 @@ static int bcm2835_spi_transfer_one(struct spi_controller *ctlr, bcm2835_wr(bs, BCM2835_SPI_CLK, cdiv); /* handle all the 3-wire mode */ - if ((spi->mode & SPI_3WIRE) && (tfr->rx_buf)) + if (spi->mode & SPI_3WIRE && tfr->rx_buf && + tfr->rx_buf != ctlr->dummy_rx) cs |= BCM2835_SPI_CS_REN; else cs &= ~BCM2835_SPI_CS_REN; diff --git a/drivers/spi/spi-fsl-qspi.c b/drivers/spi/spi-fsl-qspi.c index 41a49b93ca60..448c00e4065b 100644 --- a/drivers/spi/spi-fsl-qspi.c +++ b/drivers/spi/spi-fsl-qspi.c @@ -206,7 +206,7 @@ static const struct fsl_qspi_devtype_data imx6sx_data = { }; static const struct fsl_qspi_devtype_data imx7d_data = { - .rxfifo = SZ_512, + .rxfifo = SZ_128, .txfifo = SZ_512, .ahb_buf_size = SZ_1K, .quirks = QUADSPI_QUIRK_TKT253890 | QUADSPI_QUIRK_4X_INT_CLK, diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c index eca9d52ecf65..9eb82150666e 100644 --- a/drivers/spi/spi-gpio.c +++ b/drivers/spi/spi-gpio.c @@ -410,6 +410,12 @@ static int spi_gpio_probe(struct platform_device *pdev) bb = &spi_gpio->bitbang; bb->master = master; + /* + * There is some additional business, apart from driving the CS GPIO + * line, that we need to do on selection. This makes the local + * callback for chipselect always get called. + */ + master->flags |= SPI_MASTER_GPIO_SS; bb->chipselect = spi_gpio_chipselect; bb->set_line_direction = spi_gpio_set_direction; diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index fc7ab4b26880..bb6a14d1ab0f 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1457,6 +1457,14 @@ static const struct pci_device_id pxa2xx_spi_pci_compound_match[] = { { PCI_VDEVICE(INTEL, 0x02aa), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0x02ab), LPSS_CNL_SSP }, { PCI_VDEVICE(INTEL, 0x02fb), LPSS_CNL_SSP }, + /* TGL-LP */ + { PCI_VDEVICE(INTEL, 0xa0aa), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0ab), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0de), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0df), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0fb), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0fd), LPSS_CNL_SSP }, + { PCI_VDEVICE(INTEL, 0xa0fe), LPSS_CNL_SSP }, { }, }; @@ -1831,14 +1839,16 @@ static int pxa2xx_spi_probe(struct platform_device *pdev) status = devm_spi_register_controller(&pdev->dev, controller); if (status != 0) { dev_err(&pdev->dev, "problem registering spi controller\n"); - goto out_error_clock_enabled; + goto out_error_pm_runtime_enabled; } return status; -out_error_clock_enabled: +out_error_pm_runtime_enabled: pm_runtime_put_noidle(&pdev->dev); pm_runtime_disable(&pdev->dev); + +out_error_clock_enabled: clk_disable_unprepare(ssp->clk); out_error_dma_irq_alloc: |