diff options
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105.h | 13 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_devlink.c | 114 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_main.c | 482 | ||||
| -rw-r--r-- | drivers/net/dsa/sja1105/sja1105_vl.c | 14 | ||||
| -rw-r--r-- | include/linux/dsa/8021q.h | 9 | ||||
| -rw-r--r-- | include/linux/dsa/sja1105.h | 1 | ||||
| -rw-r--r-- | net/dsa/tag_8021q.c | 77 | ||||
| -rw-r--r-- | net/dsa/tag_ocelot_8021q.c | 4 | ||||
| -rw-r--r-- | net/dsa/tag_sja1105.c | 28 |
9 files changed, 42 insertions, 700 deletions
diff --git a/drivers/net/dsa/sja1105/sja1105.h b/drivers/net/dsa/sja1105/sja1105.h index 221c7abdef0e..869b19c08fc0 100644 --- a/drivers/net/dsa/sja1105/sja1105.h +++ b/drivers/net/dsa/sja1105/sja1105.h @@ -234,19 +234,13 @@ struct sja1105_bridge_vlan { bool untagged; }; -enum sja1105_vlan_state { - SJA1105_VLAN_UNAWARE, - SJA1105_VLAN_BEST_EFFORT, - SJA1105_VLAN_FILTERING_FULL, -}; - struct sja1105_private { struct sja1105_static_config static_config; bool rgmii_rx_delay[SJA1105_MAX_NUM_PORTS]; bool rgmii_tx_delay[SJA1105_MAX_NUM_PORTS]; phy_interface_t phy_mode[SJA1105_MAX_NUM_PORTS]; bool fixed_link[SJA1105_MAX_NUM_PORTS]; - bool best_effort_vlan_filtering; + bool vlan_aware; unsigned long learn_ena; unsigned long ucast_egress_floods; unsigned long bcast_egress_floods; @@ -264,7 +258,6 @@ struct sja1105_private { */ struct mutex mgmt_lock; struct dsa_8021q_context *dsa_8021q_ctx; - enum sja1105_vlan_state vlan_state; struct devlink_region **regions; struct sja1105_cbs_entry *cbs; struct mii_bus *mdio_base_t1; @@ -311,10 +304,6 @@ int sja1110_pcs_mdio_write(struct mii_bus *bus, int phy, int reg, u16 val); /* From sja1105_devlink.c */ int sja1105_devlink_setup(struct dsa_switch *ds); void sja1105_devlink_teardown(struct dsa_switch *ds); -int sja1105_devlink_param_get(struct dsa_switch *ds, u32 id, - struct devlink_param_gset_ctx *ctx); -int sja1105_devlink_param_set(struct dsa_switch *ds, u32 id, - struct devlink_param_gset_ctx *ctx); int sja1105_devlink_info_get(struct dsa_switch *ds, struct devlink_info_req *req, struct netlink_ext_ack *extack); diff --git a/drivers/net/dsa/sja1105/sja1105_devlink.c b/drivers/net/dsa/sja1105/sja1105_devlink.c index b6a4a16b8c7e..05c7f4ca3b1a 100644 --- a/drivers/net/dsa/sja1105/sja1105_devlink.c +++ b/drivers/net/dsa/sja1105/sja1105_devlink.c @@ -115,105 +115,6 @@ static void sja1105_teardown_devlink_regions(struct dsa_switch *ds) kfree(priv->regions); } -static int sja1105_best_effort_vlan_filtering_get(struct sja1105_private *priv, - bool *be_vlan) -{ - *be_vlan = priv->best_effort_vlan_filtering; - - return 0; -} - -static int sja1105_best_effort_vlan_filtering_set(struct sja1105_private *priv, - bool be_vlan) -{ - struct dsa_switch *ds = priv->ds; - bool vlan_filtering; - int port; - int rc; - - priv->best_effort_vlan_filtering = be_vlan; - - rtnl_lock(); - for (port = 0; port < ds->num_ports; port++) { - struct dsa_port *dp; - - if (!dsa_is_user_port(ds, port)) - continue; - - dp = dsa_to_port(ds, port); - vlan_filtering = dsa_port_is_vlan_filtering(dp); - - rc = sja1105_vlan_filtering(ds, port, vlan_filtering, NULL); - if (rc) - break; - } - rtnl_unlock(); - - return rc; -} - -enum sja1105_devlink_param_id { - SJA1105_DEVLINK_PARAM_ID_BASE = DEVLINK_PARAM_GENERIC_ID_MAX, - SJA1105_DEVLINK_PARAM_ID_BEST_EFFORT_VLAN_FILTERING, -}; - -int sja1105_devlink_param_get(struct dsa_switch *ds, u32 id, - struct devlink_param_gset_ctx *ctx) -{ - struct sja1105_private *priv = ds->priv; - int err; - - switch (id) { - case SJA1105_DEVLINK_PARAM_ID_BEST_EFFORT_VLAN_FILTERING: - err = sja1105_best_effort_vlan_filtering_get(priv, - &ctx->val.vbool); - break; - default: - err = -EOPNOTSUPP; - break; - } - - return err; -} - -int sja1105_devlink_param_set(struct dsa_switch *ds, u32 id, - struct devlink_param_gset_ctx *ctx) -{ - struct sja1105_private *priv = ds->priv; - int err; - - switch (id) { - case SJA1105_DEVLINK_PARAM_ID_BEST_EFFORT_VLAN_FILTERING: - err = sja1105_best_effort_vlan_filtering_set(priv, - ctx->val.vbool); - break; - default: - err = -EOPNOTSUPP; - break; - } - - return err; -} - -static const struct devlink_param sja1105_devlink_params[] = { - DSA_DEVLINK_PARAM_DRIVER(SJA1105_DEVLINK_PARAM_ID_BEST_EFFORT_VLAN_FILTERING, - "best_effort_vlan_filtering", - DEVLINK_PARAM_TYPE_BOOL, - BIT(DEVLINK_PARAM_CMODE_RUNTIME)), -}; - -static int sja1105_setup_devlink_params(struct dsa_switch *ds) -{ - return dsa_devlink_params_register(ds, sja1105_devlink_params, - ARRAY_SIZE(sja1105_devlink_params)); -} - -static void sja1105_teardown_devlink_params(struct dsa_switch *ds) -{ - dsa_devlink_params_unregister(ds, sja1105_devlink_params, - ARRAY_SIZE(sja1105_devlink_params)); -} - int sja1105_devlink_info_get(struct dsa_switch *ds, struct devlink_info_req *req, struct netlink_ext_ack *extack) @@ -233,23 +134,10 @@ int sja1105_devlink_info_get(struct dsa_switch *ds, int sja1105_devlink_setup(struct dsa_switch *ds) { - int rc; - - rc = sja1105_setup_devlink_params(ds); - if (rc) - return rc; - - rc = sja1105_setup_devlink_regions(ds); - if (rc < 0) { - sja1105_teardown_devlink_params(ds); - return rc; - } - - return 0; + return sja1105_setup_devlink_regions(ds); } void sja1105_devlink_teardown(struct dsa_switch *ds) { - sja1105_teardown_devlink_params(ds); sja1105_teardown_devlink_regions(ds); } diff --git a/drivers/net/dsa/sja1105/sja1105_main.c b/drivers/net/dsa/sja1105/sja1105_main.c index ced8c9cb29c2..4514ac468cc8 100644 --- a/drivers/net/dsa/sja1105/sja1105_main.c +++ b/drivers/net/dsa/sja1105/sja1105_main.c @@ -545,18 +545,11 @@ void sja1105_frame_memory_partitioning(struct sja1105_private *priv) { struct sja1105_l2_forwarding_params_entry *l2_fwd_params; struct sja1105_vl_forwarding_params_entry *vl_fwd_params; - int max_mem = priv->info->max_frame_mem; struct sja1105_table *table; - /* VLAN retagging is implemented using a loopback port that consumes - * frame buffers. That leaves less for us. - */ - if (priv->vlan_state == SJA1105_VLAN_BEST_EFFORT) - max_mem -= SJA1105_FRAME_MEMORY_RETAGGING_OVERHEAD; - table = &priv->static_config.tables[BLK_IDX_L2_FORWARDING_PARAMS]; l2_fwd_params = table->entries; - l2_fwd_params->part_spc[0] = max_mem; + l2_fwd_params->part_spc[0] = SJA1105_MAX_FRAME_MEMORY; /* If we have any critical-traffic virtual links, we need to reserve * some frame buffer memory for them. At the moment, hardcode the value @@ -1416,7 +1409,7 @@ int sja1105pqrs_fdb_add(struct dsa_switch *ds, int port, l2_lookup.vlanid = vid; l2_lookup.iotag = SJA1105_S_TAG; l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); - if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { + if (priv->vlan_aware) { l2_lookup.mask_vlanid = VLAN_VID_MASK; l2_lookup.mask_iotag = BIT(0); } else { @@ -1479,7 +1472,7 @@ int sja1105pqrs_fdb_del(struct dsa_switch *ds, int port, l2_lookup.vlanid = vid; l2_lookup.iotag = SJA1105_S_TAG; l2_lookup.mask_macaddr = GENMASK_ULL(ETH_ALEN * 8 - 1, 0); - if (priv->vlan_state != SJA1105_VLAN_UNAWARE) { + if (priv->vlan_aware) { l2_lookup.mask_vlanid = VLAN_VID_MASK; l2_lookup.mask_iotag = BIT(0); } else { @@ -1525,7 +1518,7 @@ static int sja1105_fdb_add(struct dsa_switch *ds, int port, * for what gets printed in 'bridge fdb show'. In the case of zero, * no VID gets printed at all. */ - if (priv->vlan_state != SJA1105_VLAN_FILTERING_FULL) + if (!priv->vlan_aware) vid = 0; return priv->info->fdb_add_cmd(ds, port, addr, vid); @@ -1536,7 +1529,7 @@ static int sja1105_fdb_del(struct dsa_switch *ds, int port, { struct sja1105_private *priv = ds->priv; - if (priv->vlan_state != SJA1105_VLAN_FILTERING_FULL) + if (!priv->vlan_aware) vid = 0; return priv->info->fdb_del_cmd(ds, port, addr, vid); @@ -1581,7 +1574,7 @@ static int sja1105_fdb_dump(struct dsa_switch *ds, int port, u64_to_ether_addr(l2_lookup.macaddr, macaddr); /* We need to hide the dsa_8021q VLANs from the user. */ - if (priv->vlan_state == SJA1105_VLAN_UNAWARE) + if (!priv->vlan_aware) l2_lookup.vlanid = 0; cb(macaddr, l2_lookup.vlanid, l2_lookup.lockeds, data); } @@ -2085,57 +2078,6 @@ sja1105_get_tag_protocol(struct dsa_switch *ds, int port, return priv->info->tag_proto; } -static int sja1105_find_free_subvlan(u16 *subvlan_map, bool pvid) -{ - int subvlan; - - if (pvid) - return 0; - - for (subvlan = 1; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) - if (subvlan_map[subvlan] == VLAN_N_VID) - return subvlan; - - return -1; -} - -static int sja1105_find_subvlan(u16 *subvlan_map, u16 vid) -{ - int subvlan; - - for (subvlan = 0; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) - if (subvlan_map[subvlan] == vid) - return subvlan; - - return -1; -} - -static int sja1105_find_committed_subvlan(struct sja1105_private *priv, - int port, u16 vid) -{ - struct sja1105_port *sp = &priv->ports[port]; - - return sja1105_find_subvlan(sp->subvlan_map, vid); -} - -static void sja1105_init_subvlan_map(u16 *subvlan_map) -{ - int subvlan; - - for (subvlan = 0; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) - subvlan_map[subvlan] = VLAN_N_VID; -} - -static void sja1105_commit_subvlan_map(struct sja1105_private *priv, int port, - u16 *subvlan_map) -{ - struct sja1105_port *sp = &priv->ports[port]; - int subvlan; - - for (subvlan = 0; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) - sp->subvlan_map[subvlan] = subvlan_map[subvlan]; -} - static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid) { struct sja1105_vlan_lookup_entry *vlan; @@ -2152,29 +2094,9 @@ static int sja1105_is_vlan_configured(struct sja1105_private *priv, u16 vid) return -1; } -static int -sja1105_find_retagging_entry(struct sja1105_retagging_entry *retagging, - int count, int from_port, u16 from_vid, - u16 to_vid) -{ - int i; - - for (i = 0; i < count; i++) - if (retagging[i].ing_port == BIT(from_port) && - retagging[i].vlan_ing == from_vid && - retagging[i].vlan_egr == to_vid) - return i; - - /* Return an invalid entry index if not found */ - return -1; -} - static int sja1105_commit_vlans(struct sja1105_private *priv, - struct sja1105_vlan_lookup_entry *new_vlan, - struct sja1105_retagging_entry *new_retagging, - int num_retagging) + struct sja1105_vlan_lookup_entry *new_vlan) { - struct sja1105_retagging_entry *retagging; struct sja1105_vlan_lookup_entry *vlan; struct sja1105_table *table; int num_vlans = 0; @@ -2234,50 +2156,9 @@ static int sja1105_commit_vlans(struct sja1105_private *priv, vlan[k++] = new_vlan[i]; } - /* VLAN Retagging Table */ - table = &priv->static_config.tables[BLK_IDX_RETAGGING]; - retagging = table->entries; - - for (i = 0; i < table->entry_count; i++) { - rc = sja1105_dynamic_config_write(priv, BLK_IDX_RETAGGING, - i, &retagging[i], false); - if (rc) - return rc; - } - - if (table->entry_count) - kfree(table->entries); - - table->entries = kcalloc(num_retagging, table->ops->unpacked_entry_size, - GFP_KERNEL); - if (!table->entries) - return -ENOMEM; - - table->entry_count = num_retagging; - retagging = table->entries; - - for (i = 0; i < num_retagging; i++) { - retagging[i] = new_retagging[i]; - - /* Update entry */ - rc = sja1105_dynamic_config_write(priv, BLK_IDX_RETAGGING, - i, &retagging[i], true); - if (rc < 0) - return rc; - } - return 0; } -struct sja1105_crosschip_vlan { - struct list_head list; - u16 vid; - bool untagged; - int port; - int other_port; - struct dsa_8021q_context *other_ctx; -}; - struct sja1105_crosschip_switch { struct list_head list; struct dsa_8021q_context *other_ctx; @@ -2289,7 +2170,7 @@ static int sja1105_commit_pvid(struct sja1105_private *priv) struct list_head *vlan_list; int rc = 0; - if (priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) + if (priv->vlan_aware) vlan_list = &priv->bridge_vlans; else vlan_list = &priv->dsa_8021q_vlans; @@ -2311,7 +2192,7 @@ sja1105_build_bridge_vlans(struct sja1105_private *priv, { struct sja1105_bridge_vlan *v; - if (priv->vlan_state == SJA1105_VLAN_UNAWARE) + if (!priv->vlan_aware) return 0; list_for_each_entry(v, &priv->bridge_vlans, list) { @@ -2334,9 +2215,6 @@ sja1105_build_dsa_8021q_vlans(struct sja1105_private *priv, { struct sja1105_bridge_vlan *v; - if (priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) - return 0; - list_for_each_entry(v, &priv->dsa_8021q_vlans, list) { int match = v->vid; @@ -2351,267 +2229,6 @@ sja1105_build_dsa_8021q_vlans(struct sja1105_private *priv, return 0; } -static int sja1105_build_subvlans(struct sja1105_private *priv, - u16 subvlan_map[][DSA_8021Q_N_SUBVLAN], - struct sja1105_vlan_lookup_entry *new_vlan, - struct sja1105_retagging_entry *new_retagging, - int *num_retagging) -{ - struct sja1105_bridge_vlan *v; - int k = *num_retagging; - - if (priv->vlan_state != SJA1105_VLAN_BEST_EFFORT) - return 0; - - list_for_each_entry(v, &priv->bridge_vlans, list) { - int upstream = dsa_upstream_port(priv->ds, v->port); - int match, subvlan; - u16 rx_vid; - - /* Only sub-VLANs on user ports need to be applied. - * Bridge VLANs also include VLANs added automatically - * by DSA on the CPU port. - */ - if (!dsa_is_user_port(priv->ds, v->port)) - continue; - - subvlan = sja1105_find_subvlan(subvlan_map[v->port], - v->vid); - if (subvlan < 0) { - subvlan = sja1105_find_free_subvlan(subvlan_map[v->port], - v->pvid); - if (subvlan < 0) { - dev_err(priv->ds->dev, "No more free subvlans\n"); - return -ENOSPC; - } - } - - rx_vid = dsa_8021q_rx_vid_subvlan(priv->ds, v->port, subvlan); - - /* @v->vid on @v->port needs to be retagged to @rx_vid - * on @upstream. Assume @v->vid on @v->port and on - * @upstream was already configured by the previous - * iteration over bridge_vlans. - */ - match = rx_vid; - new_vlan[match].vlanid = rx_vid; - new_vlan[match].vmemb_port |= BIT(v->port); - new_vlan[match].vmemb_port |= BIT(upstream); - new_vlan[match].vlan_bc |= BIT(v->port); - new_vlan[match].vlan_bc |= BIT(upstream); - /* The "untagged" flag is set the same as for the - * original VLAN - */ - if (!v->untagged) - new_vlan[match].tag_port |= BIT(v->port); - /* But it's always tagged towards the CPU */ - new_vlan[match].tag_port |= BIT(upstream); - new_vlan[match].type_entry = SJA1110_VLAN_D_TAG; - - /* The Retagging Table generates packet *clones* with - * the new VLAN. This is a very odd hardware quirk - * which we need to suppress by dropping the original - * packet. - * Deny egress of the original VLAN towards the CPU - * port. This will force the switch to drop it, and - * we'll see only the retagged packets. - */ - match = v->vid; - new_vlan[match].vlan_bc &= ~BIT(upstream); - - /* And the retagging itself */ - new_retagging[k].vlan_ing = v->vid; - new_retagging[k].vlan_egr = rx_vid; - new_retagging[k].ing_port = BIT(v->port); - new_retagging[k].egr_port = BIT(upstream); - if (k++ == SJA1105_MAX_RETAGGING_COUNT) { - dev_err(priv->ds->dev, "No more retagging rules\n"); - return -ENOSPC; - } - - subvlan_map[v->port][subvlan] = v->vid; - } - - *num_retagging = k; - - return 0; -} - -/* Sadly, in crosschip scenarios where the CPU port is also the link to another - * switch, we should retag backwards (the dsa_8021q vid to the original vid) on - * the CPU port of neighbour switches. - */ -static int -sja1105_build_crosschip_subvlans(struct sja1105_private *priv, - struct sja1105_vlan_lookup_entry *new_vlan, - struct sja1105_retagging_entry *new_retagging, - int *num_retagging) -{ - struct sja1105_crosschip_vlan *tmp, *pos; - struct dsa_8021q_crosschip_link *c; - struct sja1105_bridge_vlan *v, *w; - struct list_head crosschip_vlans; - int k = *num_retagging; - int rc = 0; - - if (priv->vlan_state != SJA1105_VLAN_BEST_EFFORT) - return 0; - - INIT_LIST_HEAD(&crosschip_vlans); - - list_for_each_entry(c, &priv->dsa_8021q_ctx->crosschip_links, list) { - struct sja1105_private *other_priv = c->other_ctx->ds->priv; - - if (other_priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) - continue; - - /* Crosschip links are also added to the CPU ports. - * Ignore those. - */ - if (!dsa_is_user_port(priv->ds, c->port)) - continue; - if (!dsa_is_user_port(c->other_ctx->ds, c->other_port)) - continue; - - /* Search for VLANs on the remote port */ - list_for_each_entry(v, &other_priv->bridge_vlans, list) { - bool already_added = false; - bool we_have_it = false; - - if (v->port != c->other_port) - continue; - - /* If @v is a pvid on @other_ds, it does not need - * re-retagging, because its SVL field is 0 and we - * already allow that, via the dsa_8021q crosschip - * links. - */ - if (v->pvid) - continue; - - /* Search for the VLAN on our local port */ - list_for_each_entry(w, &priv->bridge_vlans, list) { - if (w->port == c->port && w->vid == v->vid) { - we_have_it = true; - break; - } - } - - if (!we_have_it) - continue; - - list_for_each_entry(tmp, &crosschip_vlans, list) { - if (tmp->vid == v->vid && - tmp->untagged == v->untagged && - tmp->port == c->port && - tmp->other_port == v->port && - tmp->other_ctx == c->other_ctx) { - already_added = true; - break; - } - } - - if (already_added) - continue; - - tmp = kzalloc(sizeof(*tmp), GFP_KERNEL); - if (!tmp) { - dev_err(priv->ds->dev, "Failed to allocate memory\n"); - rc = -ENOMEM; - goto out; - } - tmp->vid = v->vid; - tmp->port = c->port; - tmp->other_port = v->port; - tmp->other_ctx = c->other_ctx; - tmp->untagged = v->untagged; - list_add(&tmp->list, &crosschip_vlans); - } - } - - list_for_each_entry(tmp, &crosschip_vlans, list) { - struct sja1105_private *other_priv = tmp->other_ctx->ds->priv; - int upstream = dsa_upstream_port(priv->ds, tmp->port); - int match, subvlan; - u16 rx_vid; - - subvlan = sja1105_find_committed_subvlan(other_priv, - tmp->other_port, - tmp->vid); - /* If this happens, it's a bug. The neighbour switch does not - * have a subvlan for tmp->vid on tmp->other_port, but it - * should, since we already checked for its vlan_state. - */ - if (WARN_ON(subvlan < 0)) { - rc = -EINVAL; - goto out; - } - - rx_vid = dsa_8021q_rx_vid_subvlan(tmp->other_ctx->ds, - tmp->other_port, - subvlan); - - /* The @rx_vid retagged from @tmp->vid on - * {@tmp->other_ds, @tmp->other_port} needs to be - * re-retagged to @tmp->vid on the way back to us. - * - * Assume the original @tmp->vid is already configured - * on this local switch, otherwise we wouldn't be - * retagging its subvlan on the other switch in the - * first place. We just need to add a reverse retagging - * rule for @rx_vid and install @rx_vid on our ports. - */ - match = rx_vid; - new_vlan[match].vlanid = rx_vid; - new_vlan[match].vmemb_port |= BIT(tmp->port); - new_vlan[match].vmemb_port |= BIT(upstream); - /* The "untagged" flag is set the same as for the - * original VLAN. And towards the CPU, it doesn't - * really matter, because @rx_vid will only receive - * traffic on that port. For consistency with other dsa_8021q - * VLANs, we'll keep the CPU port tagged. - */ - if (!tmp->untagged) - new_vlan[match].tag_port |= BIT(tmp->port); - new_vlan[match].tag_port |= BIT(upstream); - new_vlan[match].type_entry = SJA1110_VLAN_D_TAG; - /* Deny egress of @rx_vid towards our front-panel port. - * This will force the switch to drop it, and we'll see - * only the re-retagged packets (having the original, - * pre-initial-retagging, VLAN @tmp->vid). - */ - new_vlan[match].vlan_bc &= ~BIT(tmp->port); - - /* On reverse retagging, the same ingress VLAN goes to multiple - * ports. So we have an opportunity to create composite rules - * to not waste the limited space in the retagging table. - */ - k = sja1105_find_retagging_entry(new_retagging, *num_retagging, - upstream, rx_vid, tmp->vid); - if (k < 0) { - if (*num_retagging == SJA1105_MAX_RETAGGING_COUNT) { - dev_err(priv->ds->dev, "No more retagging rules\n"); - rc = -ENOSPC; - goto out; - } - k = (*num_retagging)++; - } - /* And the retagging itself */ - new_retagging[k].vlan_ing = rx_vid; - new_retagging[k].vlan_egr = tmp->vid; - new_retagging[k].ing_port = BIT(upstream); - new_retagging[k].egr_port |= BIT(tmp->port); - } - -out: - list_for_each_entry_safe(tmp, pos, &crosschip_vlans, list) { - list_del(&tmp->list); - kfree(tmp); - } - - return rc; -} - static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify); static int sja1105_notify_crosschip_switches(struct sja1105_private *priv) @@ -2665,12 +2282,9 @@ out: static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify) { - u16 subvlan_map[SJA1105_MAX_NUM_PORTS][DSA_8021Q_N_SUBVLAN]; - struct sja1105_retagging_entry *new_retagging; struct sja1105_vlan_lookup_entry *new_vlan; struct sja1105_table *table; - int i, num_retagging = 0; - int rc; + int rc, i; table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; new_vlan = kcalloc(VLAN_N_VID, @@ -2679,22 +2293,10 @@ static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify) return -ENOMEM; table = &priv->static_config.tables[BLK_IDX_VLAN_LOOKUP]; - new_retagging = kcalloc(SJA1105_MAX_RETAGGING_COUNT, - table->ops->unpacked_entry_size, GFP_KERNEL); - if (!new_retagging) { - kfree(new_vlan); - return -ENOMEM; - } for (i = 0; i < VLAN_N_VID; i++) new_vlan[i].vlanid = VLAN_N_VID; - for (i = 0; i < SJA1105_MAX_RETAGGING_COUNT; i++) - new_retagging[i].vlan_ing = VLAN_N_VID; - - for (i = 0; i < priv->ds->num_ports; i++) - sja1105_init_subvlan_map(subvlan_map[i]); - /* Bridge VLANs */ rc = sja1105_build_bridge_vlans(priv, new_vlan); if (rc) @@ -2709,22 +2311,7 @@ static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify) if (rc) goto out; - /* Private VLANs necessary for dsa_8021q operation, which we need to - * determine on our own: - * - Sub-VLANs - * - Sub-VLANs of crosschip switches - */ - rc = sja1105_build_subvlans(priv, subvlan_map, new_vlan, new_retagging, - &num_retagging); - if (rc) - goto out; - - rc = sja1105_build_crosschip_subvlans(priv, new_vlan, new_retagging, - &num_retagging); - if (rc) - goto out; - - rc = sja1105_commit_vlans(priv, new_vlan, new_retagging, num_retagging); + rc = sja1105_commit_vlans(priv, new_vlan); if (rc) goto out; @@ -2732,9 +2319,6 @@ static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify) if (rc) goto out; - for (i = 0; i < priv->ds->num_ports; i++) - sja1105_commit_subvlan_map(priv, i, subvlan_map[i]); - if (notify) { rc = sja1105_notify_crosschip_switches(priv); if (rc) @@ -2743,7 +2327,6 @@ static int sja1105_build_vlan_table(struct sja1105_private *priv, bool notify) out: kfree(new_vlan); - kfree(new_retagging); return rc; } @@ -2758,10 +2341,8 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, struct sja1105_l2_lookup_params_entry *l2_lookup_params; struct sja1105_general_params_entry *general_params; struct sja1105_private *priv = ds->priv; - enum sja1105_vlan_state state; struct sja1105_table *table; struct sja1105_rule *rule; - bool want_tagging; u16 tpid, tpid2; int rc; @@ -2792,19 +2373,10 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, sp->xmit_tpid = ETH_P_SJA1105; } - if (!enabled) - state = SJA1105_VLAN_UNAWARE; - else if (priv->best_effort_vlan_filtering) - state = SJA1105_VLAN_BEST_EFFORT; - else - state = SJA1105_VLAN_FILTERING_FULL; - - if (priv->vlan_state == state) + if (priv->vlan_aware == enabled) return 0; - priv->vlan_state = state; - want_tagging = (state == SJA1105_VLAN_UNAWARE || - state == SJA1105_VLAN_BEST_EFFORT); + priv->vlan_aware = enabled; table = &priv->static_config.tables[BLK_IDX_GENERAL_PARAMS]; general_params = table->entries; @@ -2818,8 +2390,6 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, general_params->incl_srcpt1 = enabled; general_params->incl_srcpt0 = enabled; - want_tagging = priv->best_effort_vlan_filtering || !enabled; - /* VLAN filtering => independent VLAN learning. * No VLAN filtering (or best effort) => shared VLAN learning. * @@ -2840,9 +2410,7 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, */ table = &priv->static_config.tables[BLK_IDX_L2_LOOKUP_PARAMS]; l2_lookup_params = table->entries; - l2_lookup_params->shared_learn = want_tagging; - - sja1105_frame_memory_partitioning(priv); + l2_lookup_params->shared_learn = !priv->vlan_aware; rc = sja1105_build_vlan_table(priv, false); if (rc) @@ -2852,12 +2420,7 @@ int sja1105_vlan_filtering(struct dsa_switch *ds, int port, bool enabled, if (rc) NL_SET_ERR_MSG_MOD(extack, "Failed to change VLAN Ethertype"); - /* Switch port identification based on 802.1Q is only passable - * if we are not under a vlan_filtering bridge. So make sure - * the two configurations are mutually exclusive (of course, the - * user may know better, i.e. best_effort_vlan_filtering). - */ - return sja1105_setup_8021q_tagging(ds, want_tagging); + return rc; } /* Returns number of VLANs added (0 or 1) on success, @@ -2927,12 +2490,9 @@ static int sja1105_vlan_add(struct dsa_switch *ds, int port, bool vlan_table_changed = false; int rc; - /* If the user wants best-effort VLAN filtering (aka vlan_filtering - * bridge plus tagging), be sure to at least deny alterations to the - * configuration done by dsa_8021q. + /* Be sure to deny alterations to the configuration done by tag_8021q. */ - if (priv->vlan_state != SJA1105_VLAN_FILTERING_FULL && - vid_is_dsa_8021q(vlan->vid)) { + if (vid_is_dsa_8021q(vlan->vid)) { NL_SET_ERR_MSG_MOD(extack, "Range 1024-3071 reserved for dsa_8021q operation"); return -EBUSY; @@ -3086,8 +2646,6 @@ static int sja1105_setup(struct dsa_switch *ds) ds->mtu_enforcement_ingress = true; - priv->best_effort_vlan_filtering = true; - rc = sja1105_devlink_setup(ds); if (rc < 0) goto out_static_config_free; @@ -3604,8 +3162,6 @@ static const struct dsa_switch_ops sja1105_switch_ops = { .cls_flower_stats = sja1105_cls_flower_stats, .crosschip_bridge_join = sja1105_crosschip_bridge_join, .crosschip_bridge_leave = sja1105_crosschip_bridge_leave, - .devlink_param_get = sja1105_devlink_param_get, - .devlink_param_set = sja1105_devlink_param_set, .devlink_info_get = sja1105_devlink_info_get, }; @@ -3785,7 +3341,6 @@ static int sja1105_probe(struct spi_device *spi) struct sja1105_port *sp = &priv->ports[port]; struct dsa_port *dp = dsa_to_port(ds, port); struct net_device *slave; - int subvlan; if (!dsa_is_user_port(ds, port)) continue; @@ -3806,9 +3361,6 @@ static int sja1105_probe(struct spi_device *spi) } skb_queue_head_init(&sp->xmit_queue); sp->xmit_tpid = ETH_P_SJA1105; - - for (subvlan = 0; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) - sp->subvlan_map[subvlan] = VLAN_N_VID; } return 0; diff --git a/drivers/net/dsa/sja1105/sja1105_vl.c b/drivers/net/dsa/sja1105/sja1105_vl.c index f6e13e6c6a18..ec7b65daec20 100644 --- a/drivers/net/dsa/sja1105/sja1105_vl.c +++ b/drivers/net/dsa/sja1105/sja1105_vl.c @@ -496,14 +496,11 @@ int sja1105_vl_redirect(struct sja1105_private *priv, int port, struct sja1105_rule *rule = sja1105_rule_find(priv, cookie); int rc; - if (priv->vlan_state == SJA1105_VLAN_UNAWARE && - key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { + if (!priv->vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only redirect based on DMAC"); return -EOPNOTSUPP; - } else if ((priv->vlan_state == SJA1105_VLAN_BEST_EFFORT || - priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) && - key->type != SJA1105_KEY_VLAN_AWARE_VL) { + } else if (priv->vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only redirect based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; @@ -595,14 +592,11 @@ int sja1105_vl_gate(struct sja1105_private *priv, int port, return -ERANGE; } - if (priv->vlan_state == SJA1105_VLAN_UNAWARE && - key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { + if (!priv->vlan_aware && key->type != SJA1105_KEY_VLAN_UNAWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only gate based on DMAC"); return -EOPNOTSUPP; - } else if ((priv->vlan_state == SJA1105_VLAN_BEST_EFFORT || - priv->vlan_state == SJA1105_VLAN_FILTERING_FULL) && - key->type != SJA1105_KEY_VLAN_AWARE_VL) { + } else if (priv->vlan_aware && key->type != SJA1105_KEY_VLAN_AWARE_VL) { NL_SET_ERR_MSG_MOD(extack, "Can only gate based on {DMAC, VID, PCP}"); return -EOPNOTSUPP; diff --git a/include/linux/dsa/8021q.h b/include/linux/dsa/8021q.h index 1587961f1a7b..608607f904a5 100644 --- a/include/linux/dsa/8021q.h +++ b/include/linux/dsa/8021q.h @@ -35,8 +35,6 @@ struct dsa_8021q_context { __be16 proto; }; -#define DSA_8021Q_N_SUBVLAN 8 - int dsa_8021q_setup(struct dsa_8021q_context *ctx, bool enabled); int dsa_8021q_crosschip_bridge_join(struct dsa_8021q_context *ctx, int port, @@ -50,21 +48,16 @@ int dsa_8021q_crosschip_bridge_leave(struct dsa_8021q_context *ctx, int port, struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev, u16 tpid, u16 tci); -void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id, - int *subvlan); +void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id); u16 dsa_8021q_tx_vid(struct dsa_switch *ds, int port); u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port); -u16 dsa_8021q_rx_vid_subvlan(struct dsa_switch *ds, int port, u16 subvlan); - int dsa_8021q_rx_switch_id(u16 vid); int dsa_8021q_rx_source_port(u16 vid); -u16 dsa_8021q_rx_subvlan(u16 vid); - bool vid_is_dsa_8021q_rxvlan(u16 vid); bool vid_is_dsa_8021q_txvlan(u16 vid); diff --git a/include/linux/dsa/sja1105.h b/include/linux/dsa/sja1105.h index b6089b88314c..0eadc7ac44ec 100644 --- a/include/linux/dsa/sja1105.h +++ b/include/linux/dsa/sja1105.h @@ -59,7 +59,6 @@ struct sja1105_skb_cb { ((struct sja1105_skb_cb *)((skb)->cb)) struct sja1105_port { - u16 subvlan_map[DSA_8021Q_N_SUBVLAN]; struct kthread_worker *xmit_worker; struct kthread_work xmit_work; struct sk_buff_head xmit_queue; diff --git a/net/dsa/tag_8021q.c b/net/dsa/tag_8021q.c index 4aa29f90ecea..d657864969d4 100644 --- a/net/dsa/tag_8021q.c +++ b/net/dsa/tag_8021q.c @@ -17,7 +17,7 @@ * * | 11 | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | * +-----------+-----+-----------------+-----------+-----------------------+ - * | DIR | SVL | SWITCH_ID | SUBVLAN | PORT | + * | DIR | RSV | SWITCH_ID | RSV | PORT | * +-----------+-----+-----------------+-----------+-----------------------+ * * DIR - VID[11:10]: @@ -27,24 +27,13 @@ * These values make the special VIDs of 0, 1 and 4095 to be left * unused by this coding scheme. * - * SVL/SUBVLAN - { VID[9], VID[5:4] }: - * Sub-VLAN encoding. Valid only when DIR indicates an RX VLAN. - * * 0 (0b000): Field does not encode a sub-VLAN, either because - * received traffic is untagged, PVID-tagged or because a second - * VLAN tag is present after this tag and not inside of it. - * * 1 (0b001): Received traffic is tagged with a VID value private - * to the host. This field encodes the index in the host's lookup - * table through which the value of the ingress VLAN ID can be - * recovered. - * * 2 (0b010): Field encodes a sub-VLAN. - * ... - * * 7 (0b111): Field encodes a sub-VLAN. - * When DIR indicates a TX VLAN, SUBVLAN must be transmitted as zero - * (by the host) and ignored on receive (by the switch). - * * SWITCH_ID - VID[8:6]: * Index of switch within DSA tree. Must be between 0 and 7. * + * RSV - VID[5:4]: + * To be used for further expansion of PORT or for other purposes. + * Must be transmitted as zero and ignored on receive. + * * PORT - VID[3:0]: * Index of switch port. Must be between 0 and 15. */ @@ -61,18 +50,6 @@ #define DSA_8021Q_SWITCH_ID(x) (((x) << DSA_8021Q_SWITCH_ID_SHIFT) & \ DSA_8021Q_SWITCH_ID_MASK) -#define DSA_8021Q_SUBVLAN_HI_SHIFT 9 -#define DSA_8021Q_SUBVLAN_HI_MASK GENMASK(9, 9) -#define DSA_8021Q_SUBVLAN_LO_SHIFT 4 -#define DSA_8021Q_SUBVLAN_LO_MASK GENMASK(5, 4) -#define DSA_8021Q_SUBVLAN_HI(x) (((x) & GENMASK(2, 2)) >> 2) -#define DSA_8021Q_SUBVLAN_LO(x) ((x) & GENMASK(1, 0)) -#define DSA_8021Q_SUBVLAN(x) \ - (((DSA_8021Q_SUBVLAN_LO(x) << DSA_8021Q_SUBVLAN_LO_SHIFT) & \ - DSA_8021Q_SUBVLAN_LO_MASK) | \ - ((DSA_8021Q_SUBVLAN_HI(x) << DSA_8021Q_SUBVLAN_HI_SHIFT) & \ - DSA_8021Q_SUBVLAN_HI_MASK)) - #define DSA_8021Q_PORT_SHIFT 0 #define DSA_8021Q_PORT_MASK GENMASK(3, 0) #define DSA_8021Q_PORT(x) (((x) << DSA_8021Q_PORT_SHIFT) & \ @@ -98,13 +75,6 @@ u16 dsa_8021q_rx_vid(struct dsa_switch *ds, int port) } EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid); -u16 dsa_8021q_rx_vid_subvlan(struct dsa_switch *ds, int port, u16 subvlan) -{ - return DSA_8021Q_DIR_RX | DSA_8021Q_SWITCH_ID(ds->index) | - DSA_8021Q_PORT(port) | DSA_8021Q_SUBVLAN(subvlan); -} -EXPORT_SYMBOL_GPL(dsa_8021q_rx_vid_subvlan); - /* Returns the decoded switch ID from the RX VID. */ int dsa_8021q_rx_switch_id(u16 vid) { @@ -119,20 +89,6 @@ int dsa_8021q_rx_source_port(u16 vid) } EXPORT_SYMBOL_GPL(dsa_8021q_rx_source_port); -/* Returns the decoded subvlan from the RX VID. */ -u16 dsa_8021q_rx_subvlan(u16 vid) -{ - u16 svl_hi, svl_lo; - - svl_hi = (vid & DSA_8021Q_SUBVLAN_HI_MASK) >> - DSA_8021Q_SUBVLAN_HI_SHIFT; - svl_lo = (vid & DSA_8021Q_SUBVLAN_LO_MASK) >> - DSA_8021Q_SUBVLAN_LO_SHIFT; - - return (svl_hi << 2) | svl_lo; -} -EXPORT_SYMBOL_GPL(dsa_8021q_rx_subvlan); - bool vid_is_dsa_8021q_rxvlan(u16 vid) { return (vid & DSA_8021Q_DIR_MASK) == DSA_8021Q_DIR_RX; @@ -227,7 +183,7 @@ static int dsa_8021q_setup_port(struct dsa_8021q_context *ctx, int port, u16 rx_vid = dsa_8021q_rx_vid(ctx->ds, port); u16 tx_vid = dsa_8021q_tx_vid(ctx->ds, port); struct net_device *master; - int i, err, subvlan; + int i, err; /* The CPU port is implicitly configured by * configuring the front-panel ports @@ -275,18 +231,11 @@ static int dsa_8021q_setup_port(struct dsa_8021q_context *ctx, int port, return err; } - /* Add to the master's RX filter not only @rx_vid, but in fact - * the entire subvlan range, just in case this DSA switch might - * want to use sub-VLANs. - */ - for (subvlan = 0; subvlan < DSA_8021Q_N_SUBVLAN; subvlan++) { - u16 vid = dsa_8021q_rx_vid_subvlan(ctx->ds, port, subvlan); - - if (enabled) - vlan_vid_add(master, ctx->proto, vid); - else - vlan_vid_del(master, ctx->proto, vid); - } + /* Add @rx_vid to the master's RX filter. */ + if (enabled) + vlan_vid_add(master, ctx->proto, rx_vid); + else + vlan_vid_del(master, ctx->proto, rx_vid); /* Finally apply the TX VID on this port and on the CPU port */ err = dsa_8021q_vid_apply(ctx, port, tx_vid, BRIDGE_VLAN_INFO_UNTAGGED, @@ -471,8 +420,7 @@ struct sk_buff *dsa_8021q_xmit(struct sk_buff *skb, struct net_device *netdev, } EXPORT_SYMBOL_GPL(dsa_8021q_xmit); -void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id, - int *subvlan) +void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id) { u16 vid, tci; @@ -489,7 +437,6 @@ void dsa_8021q_rcv(struct sk_buff *skb, int *source_port, int *switch_id, *source_port = dsa_8021q_rx_source_port(vid); *switch_id = dsa_8021q_rx_switch_id(vid); - *subvlan = dsa_8021q_rx_subvlan(vid); skb->priority = (tci & VLAN_PRIO_MASK) >> VLAN_PRIO_SHIFT; } EXPORT_SYMBOL_GPL(dsa_8021q_rcv); diff --git a/net/dsa/tag_ocelot_8021q.c b/net/dsa/tag_ocelot_8021q.c index 85ac85c3af8c..d0781b058610 100644 --- a/net/dsa/tag_ocelot_8021q.c +++ b/net/dsa/tag_ocelot_8021q.c @@ -41,9 +41,9 @@ static struct sk_buff *ocelot_rcv(struct sk_buff *skb, struct net_device *netdev, struct packet_type *pt) { - int src_port, switch_id, subvlan; + int src_port, switch_id; - dsa_8021q_rcv(skb, &src_port, &switch_id, &subvlan); + dsa_8021q_rcv(skb, &src_port, &switch_id); skb->dev = dsa_master_find_slave(netdev, switch_id, src_port); if (!skb->dev) diff --git a/net/dsa/tag_sja1105.c b/net/dsa/tag_sja1105.c index 9c2df9ece01b..7c92c329a092 100644 --- a/net/dsa/tag_sja1105.c +++ b/net/dsa/tag_sja1105.c @@ -358,20 +358,6 @@ static struct sk_buff return skb; } -static void sja1105_decode_subvlan(struct sk_buff *skb, u16 subvlan) -{ - struct dsa_port *dp = dsa_slave_to_port(skb->dev); - struct sja1105_port *sp = dp->priv; - u16 vid = sp->subvlan_map[subvlan]; - u16 vlan_tci; - - if (vid == VLAN_N_VID) - return; - - vlan_tci = (skb->priority << VLAN_PRIO_SHIFT) | vid; - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), vlan_tci); -} - static bool sja1105_skb_has_tag_8021q(const struct sk_buff *skb) { u16 tpid = ntohs(eth_hdr(skb)->h_proto); @@ -389,8 +375,8 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, struct net_device *netdev, struct packet_type *pt) { - int source_port, switch_id, subvlan = 0; struct sja1105_meta meta = {0}; + int source_port, switch_id; struct ethhdr *hdr; bool is_link_local; bool is_meta; @@ -403,7 +389,7 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, if (sja1105_skb_has_tag_8021q(skb)) { /* Normal traffic path. */ - dsa_8021q_rcv(skb, &source_port, &switch_id, &subvlan); + dsa_8021q_rcv(skb, &source_port, &switch_id); } else if (is_link_local) { /* Management traffic path. Switch embeds the switch ID and * port ID into bytes of the destination MAC, courtesy of @@ -428,9 +414,6 @@ static struct sk_buff *sja1105_rcv(struct sk_buff *skb, return NULL; } - if (subvlan) - sja1105_decode_subvlan(skb, subvlan); - return sja1105_rcv_meta_state_machine(skb, &meta, is_link_local, is_meta); } @@ -538,7 +521,7 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb, struct net_device *netdev, struct packet_type *pt) { - int source_port = -1, switch_id = -1, subvlan = 0; + int source_port = -1, switch_id = -1; skb->offload_fwd_mark = 1; @@ -551,7 +534,7 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb, /* Packets with in-band control extensions might still have RX VLANs */ if (likely(sja1105_skb_has_tag_8021q(skb))) - dsa_8021q_rcv(skb, &source_port, &switch_id, &subvlan); + dsa_8021q_rcv(skb, &source_port, &switch_id); skb->dev = dsa_master_find_slave(netdev, switch_id, source_port); if (!skb->dev) { @@ -561,9 +544,6 @@ static struct sk_buff *sja1110_rcv(struct sk_buff *skb, return NULL; } - if (subvlan) - sja1105_decode_subvlan(skb, subvlan); - return skb; } |