diff options
| -rw-r--r-- | drivers/gpu/drm/vc4/vc4_hdmi.c | 59 |
1 files changed, 29 insertions, 30 deletions
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c index 406d6d83b6c6..92556588545f 100644 --- a/drivers/gpu/drm/vc4/vc4_hdmi.c +++ b/drivers/gpu/drm/vc4/vc4_hdmi.c @@ -463,11 +463,6 @@ static void vc4_hdmi_encoder_disable(struct drm_encoder *encoder) HD_WRITE(VC4_HD_VID_CTL, HD_READ(VC4_HD_VID_CTL) & ~VC4_HD_VID_CTL_ENABLE); - HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST); - udelay(1); - HD_WRITE(VC4_HD_M_CTL, 0); - - clk_disable_unprepare(hdmi->hsm_clock); clk_disable_unprepare(hdmi->pixel_clock); ret = pm_runtime_put(&hdmi->pdev->dev); @@ -509,16 +504,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder) return; } - /* This is the rate that is set by the firmware. The number - * needs to be a bit higher than the pixel clock rate - * (generally 148.5Mhz). - */ - ret = clk_set_rate(hdmi->hsm_clock, 163682864); - if (ret) { - DRM_ERROR("Failed to set HSM clock rate: %d\n", ret); - return; - } - ret = clk_set_rate(hdmi->pixel_clock, mode->clock * 1000 * ((mode->flags & DRM_MODE_FLAG_DBLCLK) ? 2 : 1)); @@ -533,20 +518,6 @@ static void vc4_hdmi_encoder_enable(struct drm_encoder *encoder) return; } - ret = clk_prepare_enable(hdmi->hsm_clock); - if (ret) { - DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n", - ret); - clk_disable_unprepare(hdmi->pixel_clock); - return; - } - - HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST); - udelay(1); - HD_WRITE(VC4_HD_M_CTL, 0); - - HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE); - HDMI_WRITE(VC4_HDMI_SW_RESET_CONTROL, VC4_HDMI_SW_RESET_HDMI | VC4_HDMI_SW_RESET_FORMAT_DETECT); @@ -1205,6 +1176,23 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) return -EPROBE_DEFER; } + /* This is the rate that is set by the firmware. The number + * needs to be a bit higher than the pixel clock rate + * (generally 148.5Mhz). + */ + ret = clk_set_rate(hdmi->hsm_clock, 163682864); + if (ret) { + DRM_ERROR("Failed to set HSM clock rate: %d\n", ret); + goto err_put_i2c; + } + + ret = clk_prepare_enable(hdmi->hsm_clock); + if (ret) { + DRM_ERROR("Failed to turn on HDMI state machine clock: %d\n", + ret); + goto err_put_i2c; + } + /* Only use the GPIO HPD pin if present in the DT, otherwise * we'll use the HDMI core's register. */ @@ -1216,7 +1204,7 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) &hpd_gpio_flags); if (hdmi->hpd_gpio < 0) { ret = hdmi->hpd_gpio; - goto err_put_i2c; + goto err_unprepare_hsm; } hdmi->hpd_active_low = hpd_gpio_flags & OF_GPIO_ACTIVE_LOW; @@ -1224,6 +1212,14 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) vc4->hdmi = hdmi; + /* HDMI core must be enabled. */ + if (!(HD_READ(VC4_HD_M_CTL) & VC4_HD_M_ENABLE)) { + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_SW_RST); + udelay(1); + HD_WRITE(VC4_HD_M_CTL, 0); + + HD_WRITE(VC4_HD_M_CTL, VC4_HD_M_ENABLE); + } pm_runtime_enable(dev); drm_encoder_init(drm, hdmi->encoder, &vc4_hdmi_encoder_funcs, @@ -1244,6 +1240,8 @@ static int vc4_hdmi_bind(struct device *dev, struct device *master, void *data) err_destroy_encoder: vc4_hdmi_encoder_destroy(hdmi->encoder); +err_unprepare_hsm: + clk_disable_unprepare(hdmi->hsm_clock); pm_runtime_disable(dev); err_put_i2c: put_device(&hdmi->ddc->dev); @@ -1263,6 +1261,7 @@ static void vc4_hdmi_unbind(struct device *dev, struct device *master, vc4_hdmi_connector_destroy(hdmi->connector); vc4_hdmi_encoder_destroy(hdmi->encoder); + clk_disable_unprepare(hdmi->hsm_clock); pm_runtime_disable(dev); put_device(&hdmi->ddc->dev); |